- working on e09.

notes.txt

@@ -83,6 +83,16 @@ e00-06
 e00-10
     - left "/ect/init" typo
 --------------------
+e09-01
+    - I'm using tabs between opcode and operands now
+    - left "bic $!77,r1" although written comment says "? !177"
+e09-02
+    - left "movb    tty+38r0),r1" as is.  There's a write in 
+      correction for "(" instead of "8".  This concerns me as it
+      means there are probably some errors in this listing as
+      the paren is most likely the right character here.
+
+--------------------
 e10-01
 e10-02
    - I used tabs for the first tab stop and spaced out to the next step.

pages/e09-01

@@ -0,0 +1,56 @@
+/ u9 -- unix
+
+trcv:
+	jsr	rO,1f
+	jsr	rO,1f
+	jsr	rO,1f
+	jsr	rO,1f
+	jsr	rO,1f
+	jsr	rO,1f
+	jsr	rO,1f
+	jsr	rO,1f
+1:
+	mov	r1,-(sp)
+	mov	r2,-(sp)
+	mov	r3,-(sp)
+	mov	clockp,-(sp)
+	mov	$s.syst+2,clockp
+	sub	$trcv+4,r0 / 0%4 / calculate offset for tty causing
+	asl	r0 / 0%8 / this interrupt
+	mov	rcsr(r0),r2
+	mov	rcbr(r0),r1
+	tst	r2
+	blt	1f / error
+	tst	tty+6(r0)
+	beq	1f
+	bit	$40,r2 / parlty
+	bne	3f / branch if set
+	tstb	tty+4(r0)
+	blt	4f / 37 parity not allowed
+	br	2f
+3:
+	bitb	$100,tty+4(r0)
+	beq	2f / non-37 parity not allowed
+4:
+	bic	!77,r1
+	bit	$40,tty+4(r0)
+	bne	3f / raw
+	cmp	r1,$177
+	beq	5f
+	cmp	r1,$34
+	bne	3f
+5:
+	mov	tty+6(rO),r0
+	beq	2f
+	movb	r1,6(r0) / interrupt or quit
+	jsr	r0,wakeall
+	br	2f
+3:
+	cmp	r1,$15 / or
+	bne	3f
+	bit	$20,tty+4(r0)
+	beq	3f
+	mov	$12,r1
+3:
+	bitb	$4,tty+4(r0)
+

pages/e09-02

@@ -0,0 +1,56 @@
+	beq	3f
+	cmp	r1,$'A
+	blo	3f
+	cmp	r1,$'Z
+	bhi	3f
+	add	$40,r1
+3:
+	movb	tty+3(r0),0f
+	jsr	rO,putc; 0:.. / put char on input clist
+		br 2f
+	bitb	$10,tty+4(r0) / echo
+	bne	4f / branch echo bit set
+	cmp	r1,$12
+	bne	3f
+	bitb	$20,tty+4(r0) / cr
+	beq	3f
+4:
+	cmp	r1,$4 / is char input an eot
+	beq	1f
+	mov	r1,-(sp) / put char on stack
+	movb	tty+3(r0),0f
+	inc	0f
+	jsr	r0,putc; 0:.. / put char just input on output clist
+		bx: .+2
+	jsr	r0,starxmt
+	mov	(sp)+,r1
+3:
+	bitb	$40,tty+4(r0) / raw
+	bne	1f / branch if raw bit set
+	cmp	r1,$12
+	beq	1f
+	movb	tty+38r0),r1
+	cmpb	cc(r1),$15.
+	blo	2f
+1:
+	movb	tty+3(r0),0f
+	jsr	r0,wakeup; runq; 0:.. / call wakeup for process
+2:
+	jmp	retisp  
+txmt:
+	jsr	r0,1f
+	jsr	r0,1f
+	jsr	r0,1f
+	jsr	r0,1f
+	jsr	r0,1f
+	jsr	r0,1f
+	jsr	r0,1f
+	jsr	r0,1f
+1:
+	mov	r1,-(sp)
+	mov	r2,-(sp)
+	mov	r3,-(sp)
+	mov	clockp,-(sp)
+	mov	$s.syst+2,clockp
+	sub	$txmt+4,r0 / 0%4 / offset in cc
+

pages/e09-03

@@ -0,0 +1,55 @@
+asl r0 / 0%8
+jsr r0,starxmt
+jmp retisp
+xmttoz
+mov r0,—(sp)
+mov 2(sp),:O / O%2+6
+sub $5,rO
+asl r0
+asl ro / 09622
+jsr r0,starxmt
+mov (sp)+,20
+rts rO
+starxmt:
+mov (sp),r1 / 0%8 r1 contains Bxtty number _ _
+movb tty+3(r1),r1 / place contents of 4th byte of tty
+/ buf in r1 (cc,cf,cl offset)
+cmpb cc+1(r1),$10. / is char count for tty output greater
+/ than or equal to 10
+bbl 1f / yes N N
+mov r1,0f / no, make offset an arg of wakeup
+inc Of / increment arg of wakeup
+jsr rO,wakeup; runq+2; 0:.. / wakeup process identified
+/ by wlist
+1: / entry specified by argument in O:
+mov (sp),r1 / O%B / r1 contains Bxtty number
+asr r1
+asr r1
+asr r1 / OZ1 r1 contalns tty number
+tstb toutt+3(r1) / is tout entry for tty output e 0
+bne 1f / no, return to calling routine
+mov (sp),r2 / yes, place (Bxtty number) lnto r2
+tstb tcsr(r2) / does tt 's tcsr register = O (ls ready
+/ mt e 0{
+bge 1f / yes, return to calling routine _ "
+movb tty+2(r2),r1 / no, place third byte of tty buf
+/ into r1 (char left over after lf)
+clrb tty+2(r2) / clear third byte
+tst r1 / is third byte = 0
+bne 3f / no, r1 contains a non nul character “
+movb tty+3(r2),O£ / yes, make byte 4 arg of getc
+inc Of / increment arg to make it tty output list of
+/ clist
+jsr r0,getc; 0:.. / obtain next character ln cllst for tty
+/ out and place in r1
+br 1f / if no entry in cllst to be output, return to
+/ calling routine
+3:
+bic $!177,r1 / zero out blts 7-1§ of r1
+movb partab(r1),r3 / move partab entry (identified by
+/ r1) into r3
+bge 3f / if entry 1s greater than or equal to 0 (digit
+/ 2, far left digit : 0) branch
+bisb 200,r1 / lf entry is less than O add 128 to ASC11
+/ code for char to be output
+

pages/e09-04

@@ -0,0 +1,56 @@
+blc $I177,r3 / to make it teletype code and then clear
+/ bits 7-15 of r3
+3:
+mov (sp),r2 / rz contains Bxtty number
+blt $4,1.·czr(r2) / 1s carrier present for tty
+beq starxmt / no carrler flush
+mov :1,-(sp) ,/ yes, place character to be output on stack
+cmp r1,$11 / is character ht
+bne 3f / no
+bltb $2,tty+4(r2) / ls tab to space flag_for_tty set
+/ (blt 1 of byte 5 in tty buffer area)
+beq 3f / no
+mov $240,(sp) / yes, change character to space
+3:
+mov (sp)+,tcbr(r2) / place char to be output in tty output
+/ buffer __ _
+add $tty+1,r2 / place addr of 2nd byte of tty buf
+jmp 1f-2(r3) ; area in r2 (which is the column count) and
+then
+lncb (r2) / normal / jmp to location determined by digits
+/ 0 and 1 of character's entry in partab which
+I, / / is now in r3
+, rts r0 non—pr:Lntlng
+br 1f / bs  
+br 2f / nl (llne feed)  
+br 3f / tab (horizontal tab)
+br 4f / vert (vertical tab)
+br 5f / cr
+1: __ _
+decb (r2) f col decrement column count ln byte 2 of tty
+area
+bge 1f / if count >O return to calllnq routine
+clrb (r2) / col set column count = 0
+br 1f
+2:
+blt $1,r1 / is bit 0 of ASC11 char = 1 (char = lf)
+bne 2f / es __
+bitb $20,3(r2) / cr flag is blt 4 of Sth byte of "tty
+/ area = 1
+beq 2f / no (only lf to be handled) n __
+movb $15,1(r.‘2) / place cr in 3rd byte of __tty area
+/ (character leftover after lf )
+2:
+movb (r2),r3 / place present column count in r3
+beq 1f / return to calling routlne if count = 0
+clrb (r2) / col clear column count
+asr r3
+asr r3
+asr r3
+asr r3 / delay = col/16
+add $;,r3 / start to determine tout entry for tty output
+br 2
+3: _ __
+bitb $2,3(r2) / is blt 1 of 5th byte of tty area e 1
+/ (tab to space blt set)
+

pages/e09-05

@@ -0,0 +1,55 @@
+beq 3f / no
+lncb (r2) / increment column count
+bltb $7,(r2) / are bits D, 1 and 2 set at col GEF
+beq 1f / no
+movb $11,1(r2) / yes, place ht in another tab next time
+br if / grdubyte of tty area (character left over after
+/ 1f .)
+3:
+movb (r2),r3 / place column count ln r3
+blsb $7,(r2) / make bits O, 1 and 2 of column count :1
+lncb (r2) / increment column count
+bis $l7,r3 / clear bits 3-15 of r3
+neg r3 / delay e dcol start to determine tout entry for
+/ tty out
+br 2f / by neg r3
+4:
+mov $176.,r3 / delay = lots start to determine tout entry
+br 2f
+5:
+mov s10.,r3 f cr delay 160ms for tn30D start to determine
+tout
+clrb (r2) / set column count = 0 entry
+2:
+add $5,r3 / time for this char increment value for tout
+/ entry by 5 )
+mov (sp),r2 / O%B r2 contains Sxtty number
+asr r2
+asr r2 -
+asr r2 / O%1 r2 contains tty number
+movb r3,toutt+3(r2) / place value for tout entry into tout
+/ table
+1:
+rts rO / return
+partab: / contains 3 digits for each character; digit 2y1s used
+/ to determine lf 200 is to added to ASC11 code digits 0
+/ and 1 are used to determine value for jump table.
+.byte 002,202,202,002,002,002,002,202
+.byte 204,010,006,212,012,214,202,0¤2 gpl'
+.byte 202,0D2,002,202,002,602,202,002 ]wZV”4” Nut
+.byte 0O2,202,202,002,202,002,0U2,202
+.byte 200,000,000,200,000,200,200,000
+.byte 000,200,200,000,200,000,000,20O
+.byte OOO,200,200,00G,200,000,000,2OO
+.byte 200,000,000,200,000,200,200,000
+.byte 200,000,000,200,000,200,200,000
+.byte 000,200,200,000,200,000,000,200
+.byte OOO,200,200,000,200,000,000,200
+.byte ZOO,'U0,000,200,000,200,200,000
+.byte OOC,¥OO,ZO0,000,200,000,00U,2OO
+.byte 200,000,000,200,000,200,200,000
+.byte 200,000,000,200,DO0,200,200,000
+.byte OOO,200,200,000,200,000,000,2D2
+xmtt: *
+jar r0,cpass / get next character from user buffer area
+

pages/e09-06

@@ -0,0 +1,56 @@
+tst r1 / is character nul
+beq xmtt / yes, get next character
+1:
+mov $240,*sps / set processor priority equal to 5
+mov (sp),r2 / r2 contains 1 node number of file
+asl :2 / O%2+2B / multlply inode number by 2
+sub $21.,::2 / 0%247 / subtract 21 from 2x inumber to
+/ get cc, cf, cl offset
+mov r2,0f / make offset arg of putc
+cmpb cc(r2),$50. / is char count for device greater than
+/ or equal to SO
+bhls 2f / yes
+jsr r0,putc; 0:.. / find locatlcn in freelist to assign to
+/ device and
+br 2f / place char in list, if none available branch
+/ to put process to sleep
+mov :0,-(sp) / place calling routines return address on
+/ stack
+mov Ob,rO / place offset into cc, cl and cf tables in rO
+sub $7,rO / subtract seven from offset
+asl :0 / multiply by 2
+asl r0 / 0%8 / multiply by 2 (r0 contains Bxtty number)
+jar r0,starxmt / attempt to output character
+mov (sp)+,r0 / pop stack
+br xmtt / get next character
+2:
+mov r1,—(sp) / place character on stack
+mov Ob,Of / make offset into cc, cf, cl table arg of
+/ sleep (identifies location in wlist)
+jsr rD,sleep; 0:.. / put process to sleep
+mov (sp)+,r1 / remove character from stack
+br 1b / try again
+rcvt: / read tty
+sub $28.,1:*1 / 0962 r1 contains Zxtty number
+asl :1
+asl r1 / r1 contains Bxtty number
+mov r1,—(sp)
+mov tty+6(r1),r5 / r5 contains address of 4th word in
+/ tty area
+tst 2(rS) / is char count e 0
+bne 1f / no
+bltb $40,tty+4(r1) / raw flag set?
+beq 2f / no
+tst —(sp) / yes, decrement sp
+js: rO,rcvch / get character from cllst
+tst (sp)+ / increment sp
+mov (59)+;:*2 / r2 contains Bxtty number
+bltb $4,rcsr(r2) / is carrier detect bit on
+beq 3f / no
+jsr r0,passc / yes, place character in users buffer area
+3:
+jmp ret
+2:
+jsr r0,canon; rcvch / process a line of characters in
+/ cllst and place results in tty buffer
+

pages/e09-07

@@ -0,0 +1,55 @@
+/ area
+1:
+tst (sp)+ / increment sp
+1:
+tst 2(r5) / is char count for tty buffer = 0
+beg 1f / yes
+movb *4(r5),r1 / no, move character pointer to r1
+inc 4(r5) / increment character pointer
+dec 2(r5) / decrement character count
+jsr rO,passc § place character, whose address is in
+r1, in
+br 1b / user buffer area. Then get next character.
+1:
+jmp ret
+rcvch:
+mov 4(sp),r2 / O%B r2 contains Sxtty number
+mov $4,r1
+bit r1,rcsr(r2) / is carrier detection bit on
+bne 1f / yes
+bic $1,rcsr(r2) / no, clear data terminal ready bit
+rts rO
+1:
+movb tty+3(r2),Of / make cc offset arg for ugetcu
+mov $240,*$ps / set processor priority = 5
+jsr r0,qetc; 0:.. / get next character off clist
+br 2f / clist empty
+clr *$ps / set processor priority = O
+rts r0
+2= W N .. n
+mov 0b,Of / make getc arg an arg for sleep
+mov :5,-(sp) / save tty buffer address on stack
+jsr rO,sleep; 0:..
+mov (sp)+,r5
+br rcvch
+ocvt:
+sub $2S.,r1 / O%2 calculate tty table offset
+mov r1 ,1*2
+an r1 / 0%:1
+asl t1 / O%B
+mov 1:1,—(sp)
+add $6,r2 / calculate clist id clist offset
+movb r2,tty+3(r1) / pu: clist id 1n tty table
+1:
+mov (sp),r1
+bit $4,rcsr(r1) / carrier detect bit set
+bne 1f / if so, branch
+mov $511,rcsr(r1) / set ready, speed, interrupt enable,
+/ supervisor transmit
+movb tty+3(r1),Df / put clist id in sleep argument
+jsr rO,s1eep; 0;..
+br 1b
+1:
+mov tty+6(r1),r5 / put tty buffer address in r5
+tstb (rE) / first byte of tty buffer e 0
+

pages/e09-08

@@ -0,0 +1,21 @@
+	bne	1f / if not, branch
+	mov	$511,rcsr(r1) / set control bits for receiver
+	mov	$511,tcsr(r1) / set control bits for transmitter
+	mcvb	$210,tty+4(r1) / put 210 in tty table word 3 / set flags
+1:
+	incb	(r5) / inc first byte of tty buffer
+	tst	(sp)+
+	tst	u.ttyp / is there a process control tty
+	bne	1f / yes, then branch
+	mov	r5,u.ttyp / no, make this tty the process control tty
+	br	1f / return
+
+ccvt:
+	sub	$28.,r1
+	asl	r1 / 0%4
+	asl	r1
+	mov	tty+6(r1),r5
+	decb	(r5)
+1:
+	jmp	sret
+