diff --git a/bin/install-medley b/bin/install-medley
deleted file mode 100755
index 8c6f3fc..0000000
--- a/bin/install-medley
+++ /dev/null
@@ -1,758 +0,0 @@
-#! /bin/sh 
-# ============================================================================
-# Changes:
-# ============================================================================
-# SYNOPSYS:
-#		install-medley
-#
-#	Utility used for installation and upgrading of the medley system.
-#	The utility will infer as much as possible about the host and network, 
-#	but will prompt for answers when needed.
-#
-# ============================================================================
-
-# What is the application to be installed
-APPLICATION="Medley 2.0"
-
-SHAREDIR=/usr/share/lde
-LOCALDIR=/usr/local/lde
-INSTALLDIR=$LOCALDIR
-
-TAPEDEV=/dev/rst0
-
-#************************************************************
-#********* Changes below this point should normally *********
-#*********            not be required               *********
-#************************************************************
-
-# What we normally recommend to install (marked with 'x')
-# COLORP and X11P versions are deduced if possible 
-SYSOUTP=x
-MONOP=x
-DISPLAYFONTP=x
-LIBRARYP=x
-
-# All sizes in MB
-SYSOUTSIZE=5.1
-MONOSIZE=0.5
-COLORSIZE=0.5
-X11SIZE=0.6
-XNSSIZE=0.1
-LIBRARYSIZE=3
-DISPLAYFONTSIZE=5.5
-INTERPRESSFONTSIZE=1.5
-CHECKSUMSIZE=0.1
-OBJECTSIZE=0.6
-
-# All the files for each group
-SYSOUTFILES="./lispsysouts"
-CHECKSUMFILES="./checksumdir"
-LIBRARYFILES="./lisplibrary ./clos"
-DISPLAYFONTFILES="./fonts/display"
-INTERPRESSFONTFILES="./fonts/interpress ./fonts/press"
-
-LOCALHOST=`/bin/hostname`
-scriptName=`/bin/basename $0`
-
-# Send out a message when interrupted
-trap 'echo "
-Aborted..."; exit' 2
-
-#-----------------------------------------------------------
-#----------------------- PROCEDURES ------------------------
-
-exitScript () {
-	echo "$scriptName: $1"
-	exit
-} # exitScript
-
-
-ask(){
-# Ask a question=$1 and use default=$2 if no answer is given. If arg $3
-# is specified, it will be considered the opposite of $2. Return 0 if
-# default is used, 1 otherwise. 'answer' can be used as a global variable
-
-        echo -n "$1 ${2:+[$2]}: "
-	answer=`/bin/line`
-	if [ $# -gt 2 ]
-	then	until [ "$answer" = "" -o "$answer" = "$2" -o "$answer" = "$3" ];
-	        do	echo "Please type '$2' or '$3'."
-		        echo -n "$1 $2: "
-		        answer=`/bin/line`
-	        done
-	fi
-
-# Note the "-" in the argument below. test will not behave well with some 
-# of the shell escape characters otherwise.
-        [ "-${answer:=$2}" = "-$2" ]
-} # ask
-
-
-menuInstructions () {
-	echo "<--------------------> Menu Instructions <-------------------->
- - Only options marked with an 'x' will be installed. They are 
-   initally based on inferred information, recommendations and answers
-   to questions. 
- - To select additional options, at the prompt enter at least as
-   many characters as needed to make the selection unique, e.g.,
-   'XN' for XNS. To select all options, enter 'All'.
- - To deselect an option already marked with an 'x', at the prompt
-   enter at least as many characters as needed to make the 
-   selection unique. To deselect all options, enter 'None'.  
-"
-	ask "Continue?" "y"
-
-} # menuInstructions
-
-
-welcome() {
-
-	/usr/ucb/clear
-	echo "
-<----------> Welcome to the $APPLICATION Installation Utility <---------->
-
-Utility is used to install or upgrade a $APPLICATION system. It will try to infer
-as much information as possible about your system, but you will be prompted
-for specific information when it is not able to infer it automatically.
-
-Recommended options are initially filled in, but you can change them at 
-any time using the Installation Options Menu.
-"
-	menuInstructions
-
-} # welcome
-
-
-scriptMessage () {
-	MESSAGE="************************** $1 ***************************
-$2 
-************************************************************"
-} # scriptMessage
-
-
-setOSType () {
-# Pass it OS versions and it will set the OSVERSION variable
-
-	while [ $# != 0 ]
-	do	case "$1" in
-		3|3.[245]) OS3P=x ;;
-		4|4.0|4.0.*) OS4P=x ;;
-		4.1|4.1.*) OS41P=x ;;
-		*) echo " Should not happen: OStype $1 invalid" ;;
-		esac
-		shift
-	done
-	OSVERSION="${OS3P:+3} ${OS4P:+4} ${OS41P:+4.1}"
-} # setOSType
-
-
-askOSVersion(){
-# Prompt user for the correct OS-version
-	
-	MESSAGE="$1"
-
-	unset menuloop1
-	while [ ${menuloop1:-notdone} = notdone ]
-	do	/usr/ucb/clear
-		echo "
-<---------------> OS Options Menu <--------------->
-
- ${OS3P:--} 3.X - SunOS 3.2 3.4 3.5
- ${OS4P:--} 4.0 - SunOS 4.0 4.0.X
- ${OS41P:--} 4.1 - SunOS 4.1 4.1.X
-
-    All - Mark all options
-    None - Unmark all options
-    Continue installation
-${MESSAGE:+
-$MESSAGE}"
-		unset MESSAGE
-		ask "Select" "Continue"
-		case "$answer" in
-		3|3.[X245]) 
-			if [ "$OS3P" != "x" ]	
-			then OS3P=x
-			else unset OS3P
-			fi ;;
-		4.0|4.0.*)
-			if [ "$OS4P" != "x" ]	
-			then OS4P=x
-			else unset OS4P
-			fi ;;
-		4.1|4.1.*) 
-			if [ "$OS41P" != "x" ]	
-			then OS41P=x
-			else unset OS41P
-			fi ;;
-		[aA]*) OS3P=x ;	OS4P=x ; OS41P=x ;;
-		[nN]*) unset OS3P OS4P OS41P ;;
-		[cC]*|"") menuloop1=done ;;
-		*) MESSAGE="Invalid reply: $answer" ;;
-		esac
-	done
-	OSVERSION="${OS3P:+3} ${OS4P:+4} ${OS41P:+4.1}"
-} # askOSVersion
-
-
-checkInstallPoint () {
-# Uses INSTALLDIR to determine if it is possible to make an 
-# installation. INSTDIRERRP is just used to return result of operation and 
-# to signal an error message. EXISTSP is used to avoid repetitive messages.
-
-	unset INSTDIRERRP
-	if [ -f "$INSTALLDIR" ]
-	then	scriptMessage "ERROR" "A file with the same name already exists: $INSTALLDIR
-Select the 'Directory' command and make a change."
-		INSTDIRERRP=x		
-	elif [ -d "$INSTALLDIR" -a ! -w "$INSTALLDIR" ]
-	then	scriptMessage "ERROR" "Write permission denied for directory: $INSTALLDIR
-Select the 'Directory' command and make a change."
-		INSTDIRERRP=x		
-	elif [ ! -d "$INSTALLDIR" ]
-	then	/bin/mkdir -p $INSTALLDIR 1>/dev/null 2>/dev/null
-		if [ $? = 0 ]
-		then EXISTSP=x
-		else	scriptMessage "ERROR" "Could not create: $INSTALLDIR - Permission denied
-Select the 'Directory' command and make a change."
-			INSTDIRERRP=x
-		fi
-	elif [ -d "$INSTALLDIR" -a ${EXISTSP:--} = - ]
-	then	scriptMessage "WARNING" "Directory already exists: $INSTALLDIR 
-If this is the location of a previous $APPLICATION installation, 
-\"$scriptName\" may overwrite some of the old files."
-		EXISTSP=x
-	fi
-
-	[ ${INSTDIRERRP:--} = - ]
-} # checkInstallPoint
-
-
-mountTape () {
-	unset TAPEMOUNTEDP
-	while [ ${TAPEMOUNTEDP:--} = - ]
-	do	if [ "$1" = "$LOCALHOST" ]
-		then mt -f $TAPEDEV status 2>&1 | /bin/egrep -s "no sense" 
-		else	/usr/ucb/rsh "$1" mt -f $TAPEDEV status 2>&1 | /bin/egrep -s "no sense" 
-		fi
-
-		if [ $? != 0 ]
-		then	echo "ERROR. Tape not mounted or mounted improperly."
-			ask "Please insert installation tape in the tape drive. Done?" "y"
-		else	TAPEMOUNTEDP=x
-		fi
-	done
-} # mountTape
-
-
-checkTape () {
-
-	if [ "$1" = "$LOCALHOST" ]
-	then	echo -n "Looking for a local tape drive on $1 ..."
-		mt -f $TAPEDEV status 2>&1 | /bin/egrep -s "no sense|not ready|no tape loaded" 
-		if [ $? = 0 ] 
-		then 	echo " Found"
-			TAPEHOST="$LOCALHOST"
-		else	echo " Not found"
-			echo "'$LOCALHOST' does not seem to have a tape drive."
-		fi
-	else	/usr/etc/ping "$1" 10 1>/dev/null 2>/dev/null
-		if [ $? = 0 ]
-		then  	echo -n "Looking for a remote tape drive on $1 ..."
-			/usr/ucb/rsh "$1" mt -f $TAPEDEV status 2>&1 | /bin/egrep -s "no sense|not ready|no tape loaded" 
-			if [ $? = 0 ]
-			then	echo " Found"
-				TAPEHOST="$1"
-			else	echo " Not Found"
-				echo "'$1' does not seem to have a tape drive."
-			fi
-		else	echo "Could not connect to '$1' or host unknown."
-		fi
-	fi
-
-} # checkTape
-
-
-inferConfiguration () {
-# Infers as much as possible the type of configuration on the host
-# or network. Will ask when not able to determine something.
-
-	# Try to infer Os type
-	if [ -f /etc/motd ]
-	then	OSVERSION=`sed -e '1s/.*Release \(...\).*/\1/' -e '1q' < /etc/motd`
-		setOSType $OSVERSION
-	else	askOSVersion "Please specify the SunOS version you are running."
-	fi
-
-	# Is it necessary to install 'ldemulti'
-	/bin/egrep -s "cgthree0|cgsix0" /var/adm/messages
-	if [ $? = 0 ]		
-	then COLORP=x
-	fi
-
-	# Is X-windows installed on this host
- 	if [ -d /usr/bin/X11 -o -d /usr/local/X11 ]
-	then X11P=x
-	fi
-
-
-	checkTape $LOCALHOST
-
-	while [ ${TAPEHOSTP:--} = - ]
-	do
-		if [ ${TAPEHOST:--} = - ]
-		then
-			# Host is networked		
-			ask "Name of a host with a tape drive"
-			checkTape "$answer"
-		fi
-
-		if [ "${TAPEHOST:+-}" = - ]
-		then	if ask "Insert installation tape in tape drive of $TAPEHOST. Ready?" "y"
-			then 	TAPEHOSTP=x
-				mountTape "$TAPEHOST"
-			else unset TAPEHOST
-			fi
-		fi
-	done
-
-} # inferConfiguration
-
-
-emulatorSpace () {
-# Figure out according to selections what the real space requirements 
-# are for the emulator. Sets the variables RMONOSIZE, RCOLORSIZE, RX11SIZE
-# for later usage
-
-	RMONOSIZE=0
-	RCOLORSIZE=0
-	RX11SIZE=0
-
-	if [ ${MONOP:--} != - ]
-	then	for x in $OSVERSION
-		do	RMONOSIZE=`echo $MONOSIZE ${OBJECTP:+"+ $OBJECTSIZE"} + $RMONOSIZE | /bin/bc`
-		done
-	fi
-
-	if [ ${COLORP:--} != - ]
-	then	for x in $OSVERSION
-		do	RCOLORSIZE=`echo $COLORSIZE ${OBJECTP:+"+ $OBJECTSIZE"} + $RCOLORSIZE | /bin/bc`
-		done
-	fi
-
-	if [ ${X11P:--} != - ]
-	then	for x in $OSVERSION
-		do	RX11SIZE=`echo $X11SIZE ${OBJECTP:+"+ $OBJECTSIZE"} + $RX11SIZE | /bin/bc`
-		done
-	fi
-} # emulatorSpace
-
-
-showInstallMenu () {
-# Will do different calculations depending on $1. If no argument is 
-# given, it will only redisplay the Installation Options Menu.
-
-	if [ $# -ge 1 ]
-	then	if [ "$1" = available  -o $# -gt 1 ]
-		then 	if checkInstallPoint
-			then calculateSpace available
-			fi
-		fi
-
-		if [ "$1" = required  -o $# -gt 1 ]
-		then	calculateSpace required
-		fi
-
-		if [ "${EXISTSP:+-}" = - ]
-		then  sufficientSpaceP
-		fi
-	fi
-
-	/usr/ucb/clear
-
-	echo "
-<---------------> Installation Options Menu <-------------->
------------------------- Emulators -------------------------
-For one or several OS versions (At least one of monochrome,
-color, or X11-version is required for new installations).
-
-  ${MONOP:--}  Monochrome ${MONOP:+- $RMONOSIZE MByte}
-  ${COLORP:--}  Color ${COLORP:+- $RCOLORSIZE MByte}
-  ${X11P:--}  X11-version ${X11P:+- $RX11SIZE MByte}
-  ${XNSP:--}  XNS ${XNSP:+- $XNSSIZE MByte }- allows handling of the XNS protocol.
-  ${OBJECTP:--}  Object files - allows linking of Medley to other software.
-     OS version - Change versions. Selected: $OSVERSION
--------------------------- Fonts ---------------------------
-  ${DISPLAYFONTP:--}  Display ${DISPLAYFONTP:+- $DISPLAYFONTSIZE MByte }(recommended)
-  ${INTERPRESSFONTP:--}  Interpress ${INTERPRESSFONTP:+- $INTERPRESSFONTSIZE MByte}
------------- Sysout, Library & Checksum files  -------------
-  ${SYSOUTP:--}  Sysout ${SYSOUTP:+- $SYSOUTSIZE MByte} (required for new installations).
-  ${LIBRARYP:--}  Library modules ${LIBRARYP:+- $LIBRARYSIZE MByte }(recommended)
-  ${CHECKSUMP:--}  Checksum files ${CHECKSUMP:+- $CHECKSUMSIZE MByte}
-------------------------- Commands -------------------------
-     Directory - Change the installation directory. 
-      -- Current: $INSTALLDIR
-      -- Disk-space(KByte) Available:${AVAILABLESPACE:----} Needed:$DISKSPACE
-     !<Unix command> - Execute a Unix command.
-     ? or Help - Show menu instructions.
-     Redraw - Redisplay this menu.
-     All - Mark all options.
-     None - Unmark all options.
-     Continue installation.
-     Quit installation.
-${MESSAGE}"
-} # showInstallMenu
-
-
-getInstallOptions() {
-# General menu for selecting what to install
-
-	showInstallMenu required available
-
-	menuloop3=notdone
-	while [ "$menuloop3" = notdone ]
-	do	if [ "${INSTDIRERRP:+-}" = - ]
-		then 	ask "Select" "Directory"
-			unset INSTDIRERRP
-		else ask "Select" "Continue"
-		fi
-		unset MESSAGE
-
-		case "$answer" in
-		[sS]*)	if [ "$SYSOUTP" != "x" ]
-			then SYSOUTP=x
-			else unset SYSOUTP
-			fi 
-			showInstallMenu required ;;
-		[mM]*)	if [ "$MONOP" != "x" ]
-			then MONOP=x
-			else unset MONOP
-			fi 
-			showInstallMenu required ;;
-		[cC][oO][lL]*)
-			if [ "$COLORP" != "x" ]
-			then COLORP=x
-			else unset COLORP
-			fi 
-			showInstallMenu required ;;
-		[xX][1]*)
-			if [ "$X11P" != "x" ]
-			then X11P=x
-			else unset X11P
-			fi 
-			showInstallMenu required ;;
-		[xX][nN]*)
-			if [ "$XNSP" != "x" ]
-			then XNSP=x
-			else unset XNSP
-			fi 
-			showInstallMenu required ;;
-		[oO][bB]*)
-			if [ "$OBJECTP" != "x" ]
-			then OBJECTP=x
-			else unset OBJECTP
-			fi 
-			showInstallMenu required ;;
-		[oO][sS]*)
-			askOSVersion "Please specify changes you wish to make."
-			showInstallMenu required  ;;
-		[dD][iI][sS]*)
-			if [ "$DISPLAYFONTP" != "x" ]
-			then DISPLAYFONTP=x
-			else unset DISPLAYFONTP
-			fi 
-			showInstallMenu required ;;
-		[iI]*)	if [ "$INTERPRESSFONTP" != "x" ]
-			then INTERPRESSFONTP=x
-			else unset INTERPRESSFONTP
-			fi
-			showInstallMenu required ;;
-		[lL]*)	if [ "$LIBRARYP" != "x" ]
-			then LIBRARYP=x
-			else unset LIBRARYP
-			fi
-			showInstallMenu required ;;
-		[cC][hH]*)
-			if [ "$CHECKSUMP" != "x" ]
-			then CHECKSUMP=x
-			else unset CHECKSUMP
-			fi
-			showInstallMenu required ;;
-		[dD][iI][rR]*)
-			ask "Where do you want to install $APPLICATION?" "$INSTALLDIR"
-			INSTALLDIR="$answer"
-			unset EXISTSP 
-			showInstallMenu available ;;
-		!?*) eval `echo "$answer" | /bin/sed -e s/\\!//` ;;
-		\?|[hH]*) menuInstructions ; showInstallMenu ;;
-		[rR]*) showInstallMenu ;;
-		[aa]*)	SYSOUTP=x ; MONOP=x ; COLORP=x ; X11P=x ; XNSP=x
-			OBJECTP=x ; DISPLAYFONTP=x ; INTERPRESSFONTP=x 
-			LIBRARYP=x ; CHECKSUMP=x ; showInstallMenu required ;;
-		[nN]*) unset SYSOUTP MONOP COLORP X11P XNSP OBJECTP DISPLAYFONTP INTERPRESSFONTP LIBRARYP CHECKSUMP 
-			showInstallMenu required ;;
-		[cC][oO][nN]*|"") 
-			if [	${SYSOUTP:--} = - -a ${MONOP:--} = - -a \
-				${COLORP:--} = - -a ${X11P:--} = - -a \
-				${DISPLAYFONTP:--} = - -a ${INTERPRESSFONTP:--} -a \
-				${LIBRARYP:--} = - -a ${CHECKSUMP:--} = - -a \
-				${OBJECTP:--} = - -a ${XNSP:--} = - ]
-			then	scriptMessage "ERROR" "It doesn't make sense not installing anything.
-Please select an option to install"
-			elif [  \( ${MONOP:--} != - -o ${COLORP:--} != - -o \
-				${X11P:--} != - \) -a ${OS3P:--} = - -a \
-				${OS4P:--} = - -a ${OS41P:--} = - ]
-			then	scriptMessage "ERROR" "You have to select a SunOS version in order to install an emulator."
-			elif checkInstallPoint
-			then 	if sufficientSpaceP
-				then	menuloop3=done
-				fi
-			fi
-			echo "$MESSAGE" ;;
-		[qQ]*) exitScript "Aborted ..." ;;
-		 *) 	echo "Invalid reply: $answer" ;;
-		esac
-	done
-		
-} # getInstallOptions
-
-
-calculateSpace(){
-# Calculate either available space for chosen installation point or required
-# space for selected options. $1 is used to determine what to calculate.
-
-	if [ "$1" = required ]
-	then	emulatorSpace
-
-		REQUIREDSPACE=`echo	${SYSOUTP:+"$SYSOUTSIZE +"} \
-				${LIBRARYP:+"$LIBRARYSIZE +"} \
-				${DISPLAYFONTP:+"$DISPLAYFONTSIZE +"} \
-				${INTERPRESSFONTP:+"$INTERPRESSFONTSIZE +"} \
-				${CHECKSUMP:+"$CHECKSUMSIZE +"} \
-				${XNSP:+"$XNSSIZE +"} \
-				"$RMONOSIZE + $RCOLORSIZE + $RX11SIZE" | /bin/bc`
-	
-		DISKSPACE=`echo $REQUIREDSPACE "*" 1024 | /bin/bc`
-	else	DF=`/bin/df $INSTALLDIR 2>/dev/null| egrep -v Filesystem`
-
-		if [ "$DF" != "" ]
-		then	FILESYSTEM=`echo $DF | /bin/awk '{print $6}'`
-			AVAILABLESPACE=`echo $DF | /bin/awk '{print $4}'`
-		else	unset AVAILABLESPACE
-		fi
-	fi
-}
-
-
-sufficientSpaceP () {
-# Check if there is enough space in FILESYSTEM to make install
-
-	unset MISSINGSPACE
-	if [ "$DISKSPACE" -ge "$AVAILABLESPACE" ]
-	then	MISSINGSPACE=`echo $DISKSPACE - $AVAILABLESPACE | /bin/bc`
-		scriptMessage "ERROR" "There is not enough disk-space in file system: $FILESYSTEM
-Additional space needed: ($MISSINGSPACE Kbytes)
-To complete installation, select the 'Directory' command and
-make a change, or deselect some of the selected options."
-
-		INSTDIRERRP=x
-	fi
-
-	[ "$DISKSPACE" -lt "$AVAILABLESPACE" ]
-}				
-
-
-tapeCommand() {
-# Tape commands are $1 = 'rewind' and 'fsf 1'  and
-# $2 is the message to print out if given.
-
-	if [ $# -gt 1 ] 
-	then echo -n "$2"
-	fi
-
-	if [ "$TAPEHOST" = `/bin/hostname` ]
-	then	/bin/mt -f /dev/nrst0 $1 	# local tape drive
-	else	/usr/ucb/rsh -n "$TAPEHOST" /bin/mt -f /dev/nrst0 $1 # remote host
-	fi
-
-	if [ $? = 0 -a $# -gt 1 ]
-	then echo " Done"
-	fi
-
-}
-
-collectEmulatorFiles () {
-	EMULATORFILES="$EMULATORFILES $*"
-}
-
-
-extract() {
-# Extract from tape
-
-	# Print message
-	echo -n "Extracting: $1 ..."
-	shift
-
-	if [ "$TAPEHOST" = `/bin/hostname` ]
-	then	/bin/dd if=/dev/nrst0 bs=256b 2>/dev/null | /bin/tar xBipfb - 256 $*
-	else	/usr/ucb/rsh -n "$TAPEHOST" /bin/dd if=/dev/nrst0 bs=256b 2>/dev/null | /bin/tar xBipfb - 256 $*
-	fi
-
-	if [ $? != 0 ]
-	then echo " Not extracted !"
-	else echo " Done"
-	fi
-}
-
-
-extractFilesP () {
-# Returns true if either of the file arguments passed are to be
-# extracted. It is used to avoid unnecessary skips and searches on the tape.
-
-	unset EXTRACTP
-	while [ ${EXTRACTP:--} = - -a  $# != 0 ]
-	do	case "$1" in 
-		File3) EXTRACTP=${MONOP:-${COLORP:-${X11P:-${XNSP:-${OBJECTP:--}}}}} ;;
-		File4) EXTRACTP=${LIBRARYP:--} ;;
-		File5) EXTRACTP=${SYSOUTP:-${CHECKSUMP:--}} ;;
-		File6) EXTRACTP=${DISPLAYFONTP:-${INTERPRESSFONTP:--}} ;;
-		*) 
-			exitScript "Help! Should not happen: extractFilesP $1 " ;;
-		esac
-		shift
-	done
-	[ ${EXTRACTP:--} != - ]
-}
-
-
-performInstall () {
-# The actual tar of the tape. There are 5 files on the tape. 
-# File 1 Contains this script 'install-medley' (Skip past it)
-# File 2 Contains the 'medley' script (always extracted)
-# File 3 Contains the emulator files for the supported OS-versions 
-#       (executables, objectfiles and makefile)
-# File 4 Contains Lisp Library files
-# File 5 Contains Lisp Sysouts and checksumfiles 
-# File 6 Contains Font files (Display and Interpress)
-
-	cd $INSTALLDIR
-
-	tapeCommand rewind "Positioning media ..."
-	tapeCommand 'fsf 1'
-
-	extract "medley startup script" ./medley 
-
-	if extractFilesP File3
-	then	EMULATORFILES=""
-
-		for OS in $OSVERSION
-		do	collectEmulatorFiles ${MONOP:+"./install.sunos$OS/ldesingle ${OBJECTP:+./install.sunos$OS/ldesingle.o}"} ${COLORP:+"./install.sunos$OS/ldemulti ${OBJECTP:+./install.sunos$OS/ldemulti.o}"} ${X11P:+"./install.sunos$OS/ldex ${OBJECTP:+./install.sunos$OS/ldex.o}"} ${XNSP:+"./install.sunos$OS/ldeether ${OBJECTP:+./install.sunos$OS/ldeether.c}"} ${OBJECTP:+"./install.sunos$OS/makefile ./install.sunos$OS/usersubrs.c"}
-
-			if [ "${MONOP:+-}" = - -o "${COLORP:+-}" = - -o "${MULTI:+-}" = - ]
-			then 	EMULATORFILES="./install.sunos$OS/lde $EMULATORFILES"
-			fi
-		done
-	
-		extract "emulator files for OS versions: $OSVERSION" $EMULATORFILES
-
-	elif extractFilesP File4 File5 File6
-	then	tapeCommand 'fsf 1' "Skipping: emulator files ..."
-	fi
-
-	if extractFilesP File4
-	then	extract "library files" ${LIBRARYP:+$LIBRARYFILES}
-	elif extractFilesP File5 File6
-	then	tapeCommand 'fsf 1' "Skipping: library files ..."
-	fi
-
-	if extractFilesP File5
-	then	extract "${SYSOUTP:+sysout }${CHECKSUMP:+checksum }files" ${SYSOUTP:+$SYSOUTFILES} ${CHECKSUMP:+$CHECKSUMFILES}
-	elif extractFilesP File6
-	then	tapeCommand 'fsf 1' "Skipping: ${SYSOUTP:+sysout }${CHECKSUMP:+checksum }files ..."
-	fi
-
-	if extractFilesP File6
-	then	extract "${DISPLAYFONTP:+display }${INTERPRESSFONTP:+interpress }font-files" ${DISPLAYFONTP:+$DISPLAYFONTFILES} ${INTERPRESSFONTP:+$INTERPRESSFONTFILES}
-	fi
-
-	tapeCommand rewind "Done extracting files. Rewinding media ..."
-
-}
-
-
-updateFile() {
-# Will create a copy of file $1 into $1.orig
-# Will then replace $* with $2 from file $1.orig into file $1
-	FILE=$1
-	CHANGES="$*"
-	TO=$2
-
-	if [ ! -f "$FILEDIR/$FILE.orig" ]
-	then /bin/cp $FILE $FILE.orig
-	fi
-	echo -n "Updating: $FILE ... "
-	for CHANGE in CHANGES
-	do
-		/bin/sed -e 1,'$'s/$CHANGE/$TO/ <$FILE.orig >$FILE
-	done
-	if [ $? = 0 ]
-	then echo -n "Done - "
-	else echo "An error occured while trying to update: $FILE"
-	fi
-	echo "Original in: $FILE.orig ..."
-}
-
-
-updateFiles(){
-# Will update 'site-init' and 'medley' by replacing all ocassions of 
-# $SHAREDIR or $LOCALDIR to $INSTALLDIR
-
-	if ask "Do you wish to update the files 'site-init' and 'medley'
-with respect to the installation directory: $INSTALLDIR" "y" "n"
-	then	CHANGEDIR1=`echo $SHAREDIR | /bin/sed -e 's/\//\\\\\//g'`
-		CHANGEDIR2=`echo $LOCALDIR | /bin/sed -e 's/\//\\\\\//g'`
-		NEWDIR=`echo $INSTALLDIR | /bin/sed -e 's/\//\\\\\//g'`
-
-
-		FILEDIR="$INSTALLDIR/`/bin/basename $LIBRARYFILES`"
-		if [ ${LIBRARYP:--} != - -a -d "$FILEDIR" ]
-		then	cd "$FILEDIR"
-			if [ -f "$FILEDIR/site-init" ]
-			then	
-				updateFile site-init "$NEWDIR" "$CHANGEDIR1" "$CHANGEDIR2"
-			elif [ -f "$FILEDIR/site-init.lisp" ]
-			then	
-				cp site-init.lisp site-init
-				updateFile site-init "$NEWDIR" "$CHANGEDIR1" "$CHANGEDIR2"
-			else echo "Could not find: $FILEDIR/site-init"
-			fi
-		else echo "$FILEDIR/site-init not installed."
-		fi
-		if [ -f "$INSTALLDIR/medley" ]
-		then	cd "$INSTALLDIR"
-
-			updateFile medley "$NEWDIR" "$CHANGEDIR1" "$CHANGEDIR2"
-		else echo "Could not find: $INSTALLDIR/medley"
-		fi
-	fi
-}
-
-
-#------------------------------------------------------------
-# ********** Main procedure starts here. **********
-#------------------------------------------------------------
-
-welcome
-
-inferConfiguration
-
-unset answer
-while [ ${answer:--} != y ]
-do	getInstallOptions
-	ask "Ready to make installation in: $INSTALLDIR" "y" "n"
-done
-
-performInstall
-
-updateFiles
-
-exitScript "Installation of $APPLICATION completed."
diff --git a/bin/legacy/usermakefile-sunos3.mc68020 b/bin/legacy/usermakefile-sunos3.mc68020
deleted file mode 100755
index ff6c8c2..0000000
--- a/bin/legacy/usermakefile-sunos3.mc68020
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :	ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -f68881 -lX11 -lpixrect -lc -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos3.mc68020-multi b/bin/legacy/usermakefile-sunos3.mc68020-multi
deleted file mode 100755
index 72eae5b..0000000
--- a/bin/legacy/usermakefile-sunos3.mc68020-multi
+++ /dev/null
@@ -1,37 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o 
-##########################################################################
-
-default	: ldesingle ldemulti ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-
-ldeether : ldeether.c
-	cc ldeether.c -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos3.mc68020-x b/bin/legacy/usermakefile-sunos3.mc68020-x
deleted file mode 100755
index ff6c8c2..0000000
--- a/bin/legacy/usermakefile-sunos3.mc68020-x
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :	ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -f68881 -lX11 -lpixrect -lc -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.1.mc68020 b/bin/legacy/usermakefile-sunos4.1.mc68020
deleted file mode 100755
index 36c23d8..0000000
--- a/bin/legacy/usermakefile-sunos4.1.mc68020
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o, ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :  ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -f68881 -lX11 -lpixrect -lc -lm -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.1.sparc b/bin/legacy/usermakefile-sunos4.1.sparc
deleted file mode 100755
index e233050..0000000
--- a/bin/legacy/usermakefile-sunos4.1.sparc
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o, ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :  ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -lX11 -lpixrect -lc -lm -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.1.sparc-multi b/bin/legacy/usermakefile-sunos4.1.sparc-multi
deleted file mode 100755
index e233050..0000000
--- a/bin/legacy/usermakefile-sunos4.1.sparc-multi
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o, ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :  ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -lX11 -lpixrect -lc -lm -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.1.sparc-x b/bin/legacy/usermakefile-sunos4.1.sparc-x
deleted file mode 100755
index e233050..0000000
--- a/bin/legacy/usermakefile-sunos4.1.sparc-x
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o, ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :  ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -lX11 -lpixrect -lc -lm -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.mc68020 b/bin/legacy/usermakefile-sunos4.mc68020
deleted file mode 100755
index 36c23d8..0000000
--- a/bin/legacy/usermakefile-sunos4.mc68020
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o, ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :  ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -f68881 -lX11 -lpixrect -lc -lm -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.mc68020-multi b/bin/legacy/usermakefile-sunos4.mc68020-multi
deleted file mode 100755
index 32cc68d..0000000
--- a/bin/legacy/usermakefile-sunos4.mc68020-multi
+++ /dev/null
@@ -1,37 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o 
-##########################################################################
-
-default	: ldesingle ldemulti ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.mc68020-x b/bin/legacy/usermakefile-sunos4.mc68020-x
deleted file mode 100755
index 36c23d8..0000000
--- a/bin/legacy/usermakefile-sunos4.mc68020-x
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o, ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :  ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -f68881 -lX11 -lpixrect -lc -lm -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.sparc b/bin/legacy/usermakefile-sunos4.sparc
deleted file mode 100755
index e233050..0000000
--- a/bin/legacy/usermakefile-sunos4.sparc
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o, ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :  ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -lX11 -lpixrect -lc -lm -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.sparc-multi b/bin/legacy/usermakefile-sunos4.sparc-multi
deleted file mode 100755
index e233050..0000000
--- a/bin/legacy/usermakefile-sunos4.sparc-multi
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o, ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :  ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -lX11 -lpixrect -lc -lm -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/legacy/usermakefile-sunos4.sparc-x b/bin/legacy/usermakefile-sunos4.sparc-x
deleted file mode 100755
index e233050..0000000
--- a/bin/legacy/usermakefile-sunos4.sparc-x
+++ /dev/null
@@ -1,39 +0,0 @@
-##########################################################################
-# This is the user installation makefile, it does not make the "source"
-# files in this directory, i.e. it uses the objectfiles :
-# ldesingle.o, ldemulti.o, ldex.o
-##########################################################################
-
-default	: ldesingle ldemulti ldex ldeether
-
-#### The native translator needs the symbol table in 'ldesingle' or 'ldemulti',
-#### so don't 'strip'.
-
-ldesingle :  ldesingle.o usersubrs.o
-	cc ldesingle.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldesingle
-
-ldemulti :  ldemulti.o usersubrs.o
-	cc ldemulti.o usersubrs.o -lsuntool -lsunwindow -lpixrect -lc -lm -o ldemulti
-
-ldex :  ldex.o usersubrs.o
-	cc ldex.o usersubrs.o -lX11 -lpixrect -lc -lm -o ldex
-
-ldeether : ldeether.c
-	cc ldeether.c -DOS4 -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f ldesingle ldemulti ldex ldeether runlisp usersubrs.o
-
-
diff --git a/bin/makefile-header b/bin/makefile-header
index 69cefd3..ccbd784 100755
--- a/bin/makefile-header
+++ b/bin/makefile-header
@@ -7,8 +7,6 @@ INCDIR = ../inc/
 INCLUDEDIR = ../include/
 LIBDIR = ../lib
 BINDIR = ./
-RELDIR = ../RELEASE/
-MAIN = _main
 RANLIB = ranlib
 AR = ar rcv
 
diff --git a/bin/makefile-init.sparc b/bin/makefile-init.sparc
index 84c4e7f..cd7913e 100644
--- a/bin/makefile-init.sparc
+++ b/bin/makefile-init.sparc
@@ -40,8 +40,6 @@ OEXT = .o
 OPTFLAGS = -g3 -O
 DISPOPTFLAGS = -g3 -O
 
-MAIN = main
-	
 # Set any debugging options in DEBUGFLAGS.  E.g., to enable stack
 # checking, use -DSTACKCHECK; to enable the fn-call-time stack
 # check, use -DFNSTKCHECK.
diff --git a/bin/makefile-sunos5.386-x b/bin/makefile-sunos5.386-x
index 6fde220..77c8229 100644
--- a/bin/makefile-sunos5.386-x
+++ b/bin/makefile-sunos5.386-x
@@ -30,8 +30,6 @@ OEXT = .o
 OPTFLAGS =  -O2 -g
 DISPOPTFLAGS =  -O2 -g
 
-MAIN = main
-
 # Set any debugging options in DEBUGFLAGS.  E.g., to enable stack
 # checking, use -DSTACKCHECK; to enable the fn-call-time stack
 # check, use -DFNSTKCHECK.
diff --git a/bin/makefile-sunos5.i386-x b/bin/makefile-sunos5.i386-x
index 0934ad3..46dbb33 100644
--- a/bin/makefile-sunos5.i386-x
+++ b/bin/makefile-sunos5.i386-x
@@ -30,8 +30,6 @@ OEXT = .o
 OPTFLAGS =  -O2 -g3
 DISPOPTFLAGS =  -O2 -g3
 
-MAIN = main
-
 # Set any debugging options in DEBUGFLAGS.  E.g., to enable stack
 # checking, use -DSTACKCHECK; to enable the fn-call-time stack
 # check, use -DFNSTKCHECK.
diff --git a/bin/makefile-sunos5.sparc-x b/bin/makefile-sunos5.sparc-x
index 55f3781..ecf755f 100644
--- a/bin/makefile-sunos5.sparc-x
+++ b/bin/makefile-sunos5.sparc-x
@@ -37,8 +37,6 @@ OEXT = .o
 OPTFLAGS =  -O2 -g3
 DISPOPTFLAGS =  -O2 -g3
 
-MAIN = main
-
 # Set any debugging options in DEBUGFLAGS.  E.g., to enable stack
 # checking, use -DSTACKCHECK; to enable the fn-call-time stack
 # check, use -DFNSTKCHECK.
diff --git a/bin/makefile-sunos5.x86_64-x b/bin/makefile-sunos5.x86_64-x
index 1e0beaf..3524607 100644
--- a/bin/makefile-sunos5.x86_64-x
+++ b/bin/makefile-sunos5.x86_64-x
@@ -30,8 +30,6 @@ OEXT = .o
 OPTFLAGS =  -O2 -g
 DISPOPTFLAGS =  -O2 -g
 
-MAIN = main
-
 # Set any debugging options in DEBUGFLAGS.  E.g., to enable stack
 # checking, use -DSTACKCHECK; to enable the fn-call-time stack
 # check, use -DFNSTKCHECK.
diff --git a/bin/makefile-tail b/bin/makefile-tail
index f10d0ac..a24e9e7 100755
--- a/bin/makefile-tail
+++ b/bin/makefile-tail
@@ -34,12 +34,6 @@
 #	4. follow the instructions on {eris}<lispcore>sunloadup>howto-loadup-sunlisp.txt
 
 
-# '90/04/23 osamu: $INSDIR is defined in makeright 
-#
-#INSDIR = $(RELDIR)install.$(RELEASENAME)/
-CHKDIR = $(RELDIR)checksumdir/
-SCRPTDIR = $(RELDIR)scripts/
-
 # OSARCHDIR is the os/architecture dir, where executables all go.
 OSARCHDIR = ../$(OSARCHNAME)/
 
@@ -861,91 +855,6 @@ $(OBJECTDIR)lpy.tab.o : $(SRCDIR)lpy.tab.c  $(REQUIRED-INCS) $(INCDIR)lpdefs.h $
 			$(INCDIR)lpdefs.h $(INCDIR)lpglobl.h $(INCDIR)lpproto.h
 	$(CC) $(RFLAGS) $(SRCDIR)lpy.tab.c -o $(OBJECTDIR)lpy.tab$(OEXT)
 
-################################################################################
-# Installation targets - copyprotect is ON here
-# library, sysouts, fonts on release directories not handled here.
-# userfiles are separate target explicitly (can make w/o building lde)
-################################################################################
-
-prerelease :
-	mkdir $(RELDIR)
-	mkdir $(INSDIR)
-	mkdir $(CHKDIR)
-	mkdir $(SCRPTDIR)
-	
-
-release : $(INSDIR)$(LDENAME).o userfiles $(INSDIR)$(LDENAME) \
-	$(INSDIR)ldeether $(INSDIR)lde csumfiles scriptfiles
-
-userfiles : $(INSDIR)usrsubr.c $(INSDIR)makefile $(INSDIR)ldeether.c
-
-$(INSDIR)lde: $(SRCDIR)ldeboot.c $(SRCDIR)unixfork.c $(INCDIR)unixfork.h
-	$(CC) $(CFLAGS) -I$(INCDIR) $(SRCDIR)ldeboot.c $(SRCDIR)unixfork.c \
-		$(LDELDFLAGS) -o $(INSDIR)lde
-
-$(OBJECTDIR)$(LDENAME).a :              $(LIBFILES) $(OSARCHDIR)mkvdate
-	/bin/rm -f $(VFILE).c
-	$(OSARCHDIR)mkvdate > $(VFILE).c
-	$(CC) -c $(VFILE).c -o $(VFILE).o
-	rm -f $(LDENAME).a
-	$(AR) $(OBJECTDIR)$(LDENAME).a $(LIBFILES) $(VFILE).o
-	$(RANLIB) $(OBJECTDIR)$(LDENAME).a
-	rm -f $(VFILE).o
-
-$(INSDIR)$(LDENAME).o :                 $(OBJECTDIR)$(LDENAME).a
-	ld -o $(INSDIR)$(LDENAME).o -r -u $(MAIN) $(OBJECTDIR)$(LDENAME).a
-
-$(INSDIR)$(LDENAME) : $(INSDIR)$(LDENAME).o $(INSDIR)usrsubr.o
-	$(CC) $(INSDIR)$(LDENAME).o $(INSDIR)usrsubr.o $(FPFLAGS) $(LDFLAGS)\
-		 -o $(INSDIR)$(LDENAME)
-	rm -f $(INSDIR)usrsubr.o
-
-## ldeether from release - can't tar off with root permission.
-
-$(INSDIR)ldeether :  $(INSDIR)ldeether.c $(DLPIFILES) $(REQUIRED-INCS) 
-	$(CC) $(CFLAGS) $(INSDIR)ldeether.c $(DLPIFILES) $(LDEETHERLDFLAGS) -o $(INSDIR)ldeether
-	- suid $(INSDIR)ldeether"
-
-$(INSDIR)makefile : $(BINDIR)usermakefile-$(OSARCHNAME)
-	rm -f $(INSDIR)makefile
-	ln -s $(BINDIR)usermakefile-$(OSARCHNAME) $(INSDIR)makefile
-
-$(INSDIR)usrsubr.c : $(SRCDIR)usrsubr.c
-	rm -f $(INSDIR)usrsubr.c
-	ln -s $(SRCDIR)usrsubr.c $(INSDIR)usrsubr.c
-
-$(INSDIR)ldeether.c : $(SRCDIR)ldeether.c
-	rm -f $(INSDIR)ldeether.c
-	ln -s $(SRCDIR)ldeether.c $(INSDIR)ldeether.c
-
-csumfiles : $(CHKDIR)checksum $(CHKDIR)ldechecksum $(CHKDIR)README
-
-$(CHKDIR)README : $(BINDIR)checksum-readme
-	rm -f $(CHKDIR)README
-	ln -s $(BINDIR)checksum-readme $(CHKDIR)README
-
-$(CHKDIR)checksum : $(BINDIR)checksum
-	rm -f $(CHKDIR)checksum
-	cp -p $(BINDIR)checksum $(CHKDIR)checksum
-	chmod 755 $(CHKDIR)checksum
-
-$(CHKDIR)ldechecksum : $(BINDIR)ldechecksum
-	rm -f $(CHKDIR)ldechecksum
-	cp -p $(BINDIR)ldechecksum $(CHKDIR)ldechecksum
-	chmod 755 $(CHKDIR)ldechecksum
-
-scriptfiles : $(SCRPTDIR)install-medley $(SCRPTDIR)medley
-
-$(SCRPTDIR)install-medley : $(BINDIR)install-medley
-	rm -f $(SCRPTDIR)install-medley
-	cp -p $(BINDIR)install-medley $(SCRPTDIR)install-medley
-	chmod 755 $(SCRPTDIR)install-medley
-
-$(SCRPTDIR)medley : $(BINDIR)medley
-	rm -f $(SCRPTDIR)medley
-	cp -p $(BINDIR)medley $(SCRPTDIR)medley
-	chmod 755 $(SCRPTDIR)medley
-
 ################################################################################
 # Miscellaneous targets
 #	 .c.s. should always have -O
diff --git a/bin/makeright b/bin/makeright
index 78b0b70..4cdd76e 100755
--- a/bin/makeright
+++ b/bin/makeright
@@ -25,7 +25,6 @@
 #	   makeright multi	;  make lde for cg3,cg6
 #	   makeright x		;  make lde for X-windows
 #	   makeright color	;  make lde with color support in it.
-#	   makeright multi release ; make release version of lde for cg3,cg6
 #	   makeright init	;  make lde for loading INIT.DLINIT b/w only
 #
 # makeright multi requires directory "maiko/${osversion}.${architecture}-multi"
@@ -40,7 +39,6 @@
 #
 # Hide X shared libraries from link libraries search path.
 LD_LIBRARY_PATH=/usr/local/lib 
-RELDIR="../RELEASE/"
 
 export PATH=".:$PATH"
 
@@ -48,24 +46,7 @@ if test "$1" = ""
    then
 	display="single"
 else
-	if test "$1" = "release"
-          then
- 		case "$2" in
-		single)	display = single
-			;;
-		multi)	display = multi
-			;;
-		x)	display=x
-			;;
-		*)	makeright single release
-			makeright multi release
-			makeright x	release
-			exit
-			;;
-		esac
-	    else
-		display="$1"
-	fi
+    display="$1"
 fi
 
 if test $# -gt 0
@@ -95,23 +76,6 @@ case "$display" in
 		;;
 esac
 echo making with display $display releasename $releasename ldename $ldename
-releaseflg=0
-
-if test "$1" = "release" 
-    then
-	releaseflg=1
-	if test "$display" != single
-	   then
-		if test  ! -e usermakefile-${releasename} 
-                     then
-			ln usermakefile-${osversion}.${architecture} usermakefile-${releasename}
-		fi
-	fi
-else
-	releaseflg=0
-fi
-
-installdir=${RELDIR}install.${osversion}.${architecture}/
 
 #if($display == single ) then
 #       releasename = ${osversion}.${architecture}
@@ -134,7 +98,7 @@ echo start making lde for ${releasename}.
 # then finally do the make, including the right stuff
 # With makefile-tail merged, this should only take ONE make command....
 
-make RELEASENAME=${releasename} INSDIR=${installdir} LDENAME=${ldename} \
+make RELEASENAME=${releasename} LDENAME=${ldename} \
 			OSARCHNAME=${osversion}.${architecture} \
 			-f makefile-header -f makefile-${releasename} \
 			-f makefile-tail $*
diff --git a/bin/medley-solaris b/bin/medley-solaris
deleted file mode 100755
index 393a608..0000000
--- a/bin/medley-solaris
+++ /dev/null
@@ -1,203 +0,0 @@
-#! /bin/sh 
-# ============================================================================
-# Changes:
-# ============================================================================
-# SYNOPSYS:
-#		medley [[emulator] sysout]
-#
-#	If no arguments are passed to the utility, it will try to find
-#	an emulator and sysout based on DEFAULTDIR. When arguments are 
-#	given, it will try to be "smart" when finding files.
-#
-#	It also will try to find a file containing the Medley software key.
-#	If it doesn't find one, it will prompt for a valid key.
-#	
-# ============================================================================
-
-#----------          Change if necessary           ----------
-DEFAULTEMULATOR=lde 
-DEFAULTSYSOUT=LISP.SYSOUT
-DEFAULTDIR=REPLACEME	# Normally updated by installation script
-
-#************************************************************
-#********* Changes below this point should normally *********
-#*********            not be required               *********
-#************************************************************
-
-APPLICATION="Medley 2.0"
-SCRIPTNAME=`/bin/basename $0`
-HOSTNAME=`/usr/ucb/hostname`
-
-KEYFILENAME=".medleyKey.$HOSTNAME"
-
-exitScript(){
-	echo "$1"
-	exit
-}
-
-smartPath() {
-	FILE=`/bin/basename $1`
-	if [ -f "$1" ]
-	then FILEPATH=$1
-	elif [ "$FILE" = "$1" ]
-	then 	if [ -f "$2/$1" ]
-		then FILEPATH="$2/$1"
-		elif [ -f "$HOME/$1" ]
-		then FILEPATH="$HOME/$1"
-		elif [ -f "$HOME/medley/$1" ]
-		then FILEPATH="$HOME/medley/$1"
-		else exitScript "$3 file not found: $1"
-		fi
-	else exitScript "$3 file not found: $1"
-	fi
-}
-
-parseCommand() {
-	case $# in 
-	[012])	getOSVersion
-		# Now set the machine type 
-		EMULATORDIR=install.sunos${OSVERSION} 
-		PATH=$PATH:$DEFAULTDIR/$EMULATORDIR:.
-		cd $DEFAULTDIR/$EMULATORDIR
-		export PATH
-		case $# in 
-		0)	EMULATOR=$DEFAULTEMULATOR ;;
-		1)	EMULATOR=$DEFAULTEMULATOR
-			smartPath $1 $DEFAULTDIR/lispsysouts Sysout
-			SYSOUT=$FILEPATH ;;
-		2)	EMULATOR=$1
-			smartPath $2 $DEFAULTDIR/lispsysouts Sysout
-			SYSOUT=$FILEPATH ;;
-		esac ;;
-	*)	echo "Usage: $SCRIPTNAME [[emulator] sysout]"
-		exit ;;
-	esac
-}
-
-setOSVersion(){
-	unset validOSVersionP
-	case "$1" in
-	3|3.[X245]) OSVERSION=3 ;;
-	4.0|4.0.*) OSVERSION=4 ;;
-	4.1|4.1.*) OSVERSION=4.1 ;;
-	5.*) OSVERSION=5 ;;
-	*) 	MESSAGE="Invalid reply: $answer"
-		validOSVersionP=notTrue ;;
-	esac
-	[ ${validOSVersionP:-true} = true ]
-}
-
-askOSVersion(){
-	MESSAGE="$1"
-	while [ ${menuloop:-notdone} = notdone ]
-	do	/usr/ucb/clear
-
-		echo "
-<---------------> OS Options Menu <--------------->
-    3.X - SunOS 3.2 3.4 3.5
-    4.0 - SunOS 4.0 4.0.X
-    4.1 - SunOS 4.1 4.1.X
-    5.0 - SunOS 5.0 and up.
-${MESSAGE:+
-$MESSAGE}"
-		unset MESSAGE
-		echo -n "Select : "
-		answer=`/usr/bin/line`
-		if setOSVersion $answer
-		then menuloop=done
-		fi
-	done
-}
-
-getOSVersion() {
-	if [ -f /etc/motd ]
-	then	if setOSVersion `/usr/ucb/sed -e '1s/.*SunOS \(...\).*/\1/' -e '1q' < /etc/motd`
-		then echo -n ""
-		else echo "$MESSAGE"
-		fi
-	else	askOSVersion "Please specify the SunOS version you are running."
-	fi
-}
-
-validKeyP() {
-	unset keyTooLongP
-	VALID=`echo $* | /bin/awk '/[^0-9a-fA-F ]/'`
-	for group in $*
-	do	LENGTH=`echo $group | /bin/awk '{print length}'`
-		if [ "$LENGTH" -gt 8 ]
-		then keyTooLongP=true
-		fi
-	done
-	[ $# = 3 -a "$VALID" = "" -a ${keyTooLongP:-notTrue} = notTrue ]
-}
-
-saveKey() {
-	echo "Saving key '$KEY' into file '$KEYFILENAME' ..."
-	echo -n "Trying $DEFAULTDIR/$KEYFILENAME ..."
-	if [ -w "$DEFAULTDIR" ]
-	then	echo "$KEY" > "$DEFAULTDIR/$KEYFILENAME"
-	else	echo " Write protected ! "
-		echo -n "Trying $HOME/$KEYFILENAME instead ..."
-		echo "$KEY" > "$HOME/$KEYFILENAME"
-	fi
-	if [ $? = 0 ]
-	then echo " Done"
-	else echo " Some error occured \! "
-	fi
-}
-
-keyDefinedP() {
-	if [ -f "$DEFAULTDIR/$KEYFILENAME" ]
-	then	if [ -r "$DEFAULTDIR/$KEYFILENAME" ]
-		then KEYFILE="$DEFAULTDIR/$KEYFILENAME"
-		else echo "ERROR! Cannot read file: $DEFAULTDIR/$KEYFILE"
-		fi
-	elif [ -f "$HOME/$KEYFILENAME" ]
-	then	KEYFILE="$HOME/$KEYFILENAME"
-	else	echo "
-	To start $APPLICATION, a host access key is required.
-	Call Venue at (1-800-228-5325) for one,
-
-	and be prepared to give them your workstations host ID#
-"
-	fi
-	[ ${KEYFILE:-notSpecified} != notSpecified ]
-}
-
-promptForKey () {
-	while [ ${VALIDKEYP:-notValid} = notValid ]
-	do	echo "Your workstations host ID# is: `hostid`"
-		echo -n "Type in the key or [^C] to abort: "
-		KEY=`/usr/bin/line`
-
-		if validKeyP $KEY
-		then VALIDKEYP=x
-		else echo "Sorry, invalid key: $KEY"
-		fi
-	done
-}
-
-
-#************************************************************
-#**********           Main piece of code           **********
-#************************************************************
-
-trap 'echo "
-$SCRIPTNAME: Aborted ..."; exit' 2
-
-parseCommand $*
-
-if keyDefinedP
-then	KEY=`/usr/bin/cat $KEYFILE`
-else	promptForKey 
-	saveKey
-fi
-
-
-# Well, I think we might be ready to give it a try
-echo "Starting up $APPLICATION ..."
-/bin/sleep 2
-$EMULATOR $SYSOUT -k "$KEY"
-	
-
-
diff --git a/bin/usermakefile b/bin/usermakefile
deleted file mode 100755
index 86ab4bb..0000000
--- a/bin/usermakefile
+++ /dev/null
@@ -1,30 +0,0 @@
-################################################################################
-## This is the user installation makefile, it does not make the "source"
-## files in this directory (i.e. this makefile, lde.o).
-################################################################################
-
-default	: lde ldeether
-
-#### The native translator needs the symbol table in 'lde', so don't 'strip'.
-
-lde	:  lde.o usersubrs.o
-	cc lde.o usersubrs.o -f68881 -lsuntool -lsunwindow -lpixrect -lc -o lde
-
-ldeether	: ldeether.c
-	cc ldeether.c -o ldeether
-	@echo ""
-	@echo "The 'ldeether' executable must be made setuid root to allow"
-	@echo "PUP/XNS Ethernet access.  Feel free to examine the source"
-	@echo "of 'ldeether' before doing this."
-
-
-#### user ops is placeholder for user subrs.  needs work.
-
-usersubrs.o :    usersubrs.c
-	cc -c -O usersubrs.c 
-
-#### gets rid of user-created files.
-
-cleanup :
-	rm -f lde ldeether runlisp usersubrs.o
-