64 lines
4.8 KiB
PSL
64 lines
4.8 KiB
PSL
|
||
|
||
4045XLPSTREAM TEST PROCEDURE
|
||
|
||
Filed as {ERIS}<TEST>I/O>HARDCOPY>HAND>4045XLPSTREAM.PROC
|
||
|
||
This procedure describes a test with all three available communications packages (RS232C, TTY and CENTRONICS), but it explains how to adapt the test for a smaller set. To test the first two, you need a 4045 with a serial port installed; to test the third, you need a 4045 with the parallel port installed. Each of the three ports requires its own cable wired as shown under "Cabling" in the Lisp Library Modules writeup on 4045XLPSTREAM.
|
||
|
||
Follow this procedure from an 1108 or 1109 and from an 1186 with hardware and software installed as specified in Section 5 of {ERINYES}<TEST>LISP>LYRIC>PLANS>4045XLPSTREAM.PLAN. Only an 1109 can run the 4045 with CENTRONICS.
|
||
The success criterion is that all files should print and the each printed copy should look like the same file viewed on the screen with FileBrowser's Edit option.
|
||
|
||
A. Preparation
|
||
1. Open a Common Lisp Exec window and enter
|
||
(CL:IN-PACKAGE 'XCL-USER)
|
||
Enter all subsequent commands from this window and this package.
|
||
2. Verify that {ERINYES}<releasename>LIBRARY> is at the head of the list IL:DIRECTORIES. If not, use CONS or DV to put it there.
|
||
3. Use the FileBrowser or IL:LOAD to load {ERINYES}<releasename>LIBRARY>4045XLPSTREAM.LCOM. A prompt will appear asking which port you plan to use.
|
||
- If testing with all three, with both serial ports (RS232 and TTY) or with RS232 only, enter R.
|
||
- If testing with TTY only, enter T.
|
||
- If testing with CENTRONICS only, enter C.
|
||
3. Enter
|
||
(IL:LOAD "{ERIS}<TEST>I/O>HARDCOPY>HAND>STREAMTESTS.DFASL")
|
||
IL:CONN "{ERIS}<TEST>I/O>HARDCOPY>HAND>TESTFILES>"
|
||
4. Set the printer 4045's configuration cartridge as shown under "Configuration of the 4045" in Lisp Library Modules.
|
||
5. Enter
|
||
(DEFPRINT 4045)
|
||
to ensure that FASTFX80 is at the head of IL:DEFAULTPRINTINGHOST. The function will return the new list.
|
||
B. 4045 Test Through the RS232 Port
|
||
1. Connect the workstation to the 4045 through the RS232 port with a cable wired as shown in Lisp Library Modules.
|
||
2. Enter
|
||
(IL:RS232C.INIT 9600 8 'IL:NONE 1 'IL:XONXOFF)
|
||
to set the baud rate, bits/char, parity and flow control.
|
||
3. Enter
|
||
(SENDFILES)
|
||
to send the files in the connected directory to the printer.
|
||
4. (Optional stress test) Enter
|
||
(STRESSTEST)
|
||
to send the file {ERIS}<TEST>I/O>HARDCOPY>HAND>STRESSTEST>STRESSTEST.TEDIT to the printer.
|
||
|
||
C. 4045 Test Through the TTY Port
|
||
1. Connect the workstation to the 4045 through the TTY port with a cable wired as shown in Lisp Library Modules.
|
||
2. Enter
|
||
(4045SET TTY)
|
||
to call the function IL:4045XLP.SET.PARAMETERS for the TTY port.
|
||
3. Enter
|
||
(IL:TTY.INIT 9600 8 'IL:NONE 1 'IL:XONXOFF)
|
||
to set the baud rate, bits/char, parity and flow control.
|
||
4. If this is the first test run, load 4045XLPSTREAM.LCOM as explained in step A.3, replying to the prompt with T.
|
||
5. Perform steps B. 3 and B. 4.
|
||
|
||
D. 4045 Test Through the CENTRONICS Port
|
||
1. Connect the workstation to the 4045 through the CENTRONICS port with a cable wired as shown in Lisp Library Modules.
|
||
2. If this is the first test run, load 4045XLPSTREAM.LCOM as explained in step A.3, replying to the prompt with C.
|
||
2. With the 4045 powered on, enter
|
||
(CENTRONICS.RESET)
|
||
(4045SET 'IL:CENTRONICS)
|
||
3. Perform steps B. 3 and B. 4.
|
||
|
||
|
||
NOTE: This procedure leaves the 4045 as the default printer. Use IL:DV, POP or SETQ to restore IL:DEFAULTPRINTINGHOST to its original state.
|
||
|
||
2 0 0 0 2 0 , GACHA
|
||
|
||
TIMESROMAN
|
||
|
||
TIMESROMAN
|
||
T F(DEFAULTFONT 1 (GACHA 10) (GACHA 8) (TERMINAL 8) (4045XLP (TITAN 10)))
|
||
: Š â £ , A _ 4 V a % , < 3 ` j $ ] / : =
|
||
2 " [ A , : s ) b s # <00>
|
||
R Œzº |