github.com/PDP-10.its
1
0
Fork 0
mirror of https://github.com/PDP-10/its.git synced 2026-01-31 05:52:12 +00:00
Code Issues Releases Wiki Activity

Update networking.md

Browse Source 
fixing PDP10-KA simh configuration file so that ; is not inline with the command.
This commit is contained in:
Mike Kostersitz (Oilcan Productions)
2023-04-03 16:49:51 -07:00
committed by GitHub
parent 9907dc9ee4
commit 600199e94b
1 changed files with 12 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
doc/networking.md
View File

@@ -90,12 +90,18 @@ Verify you have the TAP0 and BR0 interfaces and check you have internet access.
Next configure SIMH
Under your root folder for the project i.e. `/home/<user>/its` edit the SIMH configuration file `out/pdp10-ka/run` or `out/pdp10-kl/run` and configure the `IMP` interface as follows:
```
set imp enabled ; enable SIMH network emulation
set imp mac=e2:6c:84:1d:34:a3 ; if you are running multiple SIMH instances on the same host you might have to change the MAC address
set imp DHCP ; enable DHCP, this will allow SIMH to get an IP address from your home network
set imp host=10.3.0.6 ; configure the ITS host IP
set imp mpx=4 ; Only on PDP10-KA! Set the network interface interrupt
at imp tap:tap0 ; map the host tap interface
; enable SIMH network emulation
set imp enabled
; if you are running multiple SIMH instances on the same host you might have to change the MAC address
set imp mac=e2:6c:84:1d:34:a3
; enable DHCP, this will allow SIMH to get an IP address from your home network
set imp DHCP
; configure the ITS host IP
set imp host=10.3.0.6
; Only on PDP10-KA! Set the network interface interrupt
set imp mpx=4
; map the host tap interface
at imp tap:tap0
```
Now start ITS as you normally would.
To find the IP address the SIMH adapter interrupt the simulation by hitting `CTRL+\` and at the `simh>` prompt type `sho imp` the output will give you the IP address of the simulated network card.