diff --git a/build/klh10/dskdmp2.ini b/build/klh10/dskdmp2.ini
new file mode 100644
index 00000000..42913d72
--- /dev/null
+++ b/build/klh10/dskdmp2.ini
@@ -0,0 +1,30 @@
+; Define basic KS10 device config - two RH11s each on its own Unibus
+
+devdef rh0  ub1   rh11   addr=776700 br=6 vec=254
+devdef rh1  ub3   rh11   addr=772440 br=6 vec=224
+
+; Provide one disk, one tape in config ITS expects
+
+devdef dsk0 rh0.0 rp     type=rp06 format=dbd9 path=../../out/klh10/rp0.dsk iodly=0
+devdef dsk1 rh0.1 rp     type=rp06 format=dbd9 path=../../out/klh10/rp1.dsk iodly=0
+devdef mta0 rh1.0 tm02   fmtr=tm03 type=tu45
+;devdef mta1 rh1.1 tm02   fmtr=tm03 type=tu45
+;devmo mta0 ../../out/klh10/minsys.tape
+;devmo mta1 ../../out/klh10/salv.tape
+
+; ITS wants a 60Hz clock, allow it.  Need this until defaults OK.
+set clk_ithzfix=60
+
+; Define IMP for PI on ITS.JOSS.COM
+devdef imp  ub3   lhdh   addr=767600 br=6 vec=250 ipaddr=192.168.1.100 gwaddr=192.168.0.45
+
+; Dummy definitions.  Only one DZ is still (apparently) needed.
+devdef dz0  ub3   dz11   addr=760010 br=5 vec=340
+;devdef dz1  ub3   dz11   addr=760020 br=5 vec=350
+devdef chaos ub3  ch11   addr=764140 br=6 vec=270 myaddr=3130 chip=3150/no.nocrew.org chip=3143/up.update.uu.se chip=7100/sj.gewt.net
+
+; Define new HOST device hackery
+devdef idler ub3 host addr=777000
+
+load @.ddt-u
+load dskdmp.216bin
diff --git a/build/klh10/nsalv.dump b/build/klh10/nsalv.dump
new file mode 100644
index 00000000..d7d646c2
Binary files /dev/null and b/build/klh10/nsalv.dump differ