Eric Swenson
e5ee34480e
Updated config for KL build to include KL in ITSNMS table, rather than MC.
2024-03-22 09:18:53 +01:00
Lars Brinkhoff
cb1209ac68
Configure ITS and emulators for a local Chaos subnet.
...
It has been agreed that subnet 376 should be a local Chaosnetwork.
The Chaosnet bridge has been given the node address 177001, and
DB/KA/KL ITS is node 177002.
2023-09-13 19:09:59 +02:00
Lars Brinkhoff
153b823406
Start the Chaosnet bridge.
2023-09-13 19:09:59 +02:00
Eric Swenson
78ae9769b8
Enable DEMON in ITS configuration.
2023-03-10 09:20:46 -08:00
Lars Brinkhoff
094cfd5a3d
Fix pdp10-kl TTY settings.
2022-12-03 08:24:17 +01:00
Lars Brinkhoff
e18c2807dd
Use -u with all SIMH terminal line attach commands.
2022-04-22 17:42:30 +02:00
Lars Brinkhoff
3dcc8031e1
Explicitly set mta enabled for pdp10-kl.
2022-04-20 21:58:29 +02:00
Lars Brinkhoff
f2f56bc58c
Provide emulated dial-up lines.
...
For LMODEM to work, it requires a TTY line to have the %TYDIL dial-up
bit set in TTYTYP. Only TK-10, Morton, and DTE-20 controllers are
recognized.
2021-11-10 15:31:30 +01:00
Adam Sampson
8fa00758d0
Enable the IPC device for all build machines.
...
At MIT this was only enabled on DM. Muddle has built-in support for it,
and it seems to have been fairly widely used in existing Muddle images.
2020-09-13 21:37:12 +01:00
Lars Brinkhoff
3d27de18ed
Add emulators to start script.
2020-06-09 18:02:50 +02:00
Lars Brinkhoff
7e396a61af
Update start scripts for PDP-10 emulators other than SIMH KA10.
2020-06-09 18:02:50 +02:00
Eric Swenson
50b95c1241
Build ITS with KL10 simulator.
2019-10-02 19:47:59 +02:00
Lars Brinkhoff
299dfd277e
Make MC great again.
2019-09-15 23:15:43 +02:00
Lars Brinkhoff
627704fa53
Add RP04P to ITS' MX configuration.
2019-09-05 19:16:49 +02:00
Lars Brinkhoff
a83af870dd
Default RP04P to 0 in ITS' configuration file.
2019-09-05 19:16:49 +02:00
Lars Brinkhoff
4ca22dc3e5
Update comments about disk packs in ITS' configuration.
2019-09-05 19:16:49 +02:00
Eric Swenson
a1d6eb3983
Updated "run" script for pdp10-kl to use DDT rather than DSKDMP.
...
Resolves #1700 .
2019-08-15 12:41:42 -07:00
Eric Swenson
03d21e10aa
Updated pdp10-kl build to use TM10B since TM10A is unreliable.
...
Resolves #1699 .
2019-08-15 12:41:42 -07:00
Eric Swenson
daf4b8bad1
Updated the init, boot, boot2, and run scripts to use "set dc disable"
...
rather than "set dc dis", since the latter is ambiguous. Resolves #1698 .
2019-08-15 12:41:42 -07:00
Lars Brinkhoff
32780292cf
Enable PD clock, enable idling.
2019-08-05 16:03:11 +02:00
Lars Brinkhoff
fa52a91b9d
Disable unused devices in KA10 simulator.
2019-08-05 16:03:11 +02:00
Eric Swenson
90ed513cef
Added support for RP06 disks with RH10 disk controller. Moved RP04
...
disk parameters to separate file (system;rp04 >) from system;rh10 >.
Made build default to RP04 when RH10 is specified, but switches
can select RP06 for relevant components. Resolves #1648 .
2019-07-29 12:36:29 -07:00
Lars Brinkhoff
36bd63e923
Have KL ITS boot directly into NTS DDT.
2019-07-20 06:26:41 +02:00
Lars Brinkhoff
15a107bee1
Some more changes for a fully working KL ITS build.
2019-07-03 15:07:58 +02:00
Lars Brinkhoff
e61466033a
KL ITS needs three RP04 packs.
2019-07-03 15:07:58 +02:00
Lars Brinkhoff
5d6febdfe0
Build script for KL ITS.
2019-07-03 15:07:58 +02:00
Lars Brinkhoff
24805a659d
Add new ITS named "KL", which is a KA10 with RH10.
...
The reason for this confusion is that it is intended in the future to
become a KL10.
2019-06-28 18:10:43 +02:00
