; Define basic KS10 device config - two RH11s each on its own Unibus

devdef rh0  ub1   rh11   addr=776700 br=6 vec=254
devdef rh1  ub3   rh11   addr=772440 br=6 vec=224

; Provide one disk, one tape in config ITS expects

devdef dsk0 rh0.0 rp     type=rp06 format=dbd9 path=../../out/klh10/rp0.dsk iodly=0
devdef mta0 rh1.0 tm02   fmtr=tm03 type=tu45
devdef mta1 rh1.1 tm02   fmtr=tm03 type=tu45
devmo mta0 ../../out/klh10/minsys.tape
devmo mta1 ../../out/klh10/salv.tape

; ITS wants a 60Hz clock, allow it.  Need this until defaults OK.
set clk_ithzfix=60

; Define IMP for PI on ITS.JOSS.COM
devdef imp  ub3   lhdh   addr=767600 br=6 vec=250 ipaddr=199.34.53.51 gwaddr=199.34.53.50

; Dummy definitions.  Only one DZ is still (apparently) needed.
devdef dz0  ub3   dz11   addr=760010 br=5 vec=340
;devdef dz1  ub3   dz11   addr=760020 br=5 vec=350
;devdef chaos ub3  ch11   addr=764140 br=5 vec=270

; Define new HOST device hackery
;devdef idler ub3 host addr=777000

load @.nsalv-260-u