github.com/PDP-10.its
1
0
Fork 0
mirror of https://github.com/PDP-10/its.git synced 2026-01-24 11:22:36 +00:00
Code Issues Releases Wiki Activity
PDP-10.its/src/system/tcpbuf.58

579 lines
20 KiB
Plaintext
Executable File
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;;; Copyright (c) 1999 Massachusetts Institute of Technology
;;; See the COPYING file at the top-level directory of this project.
COMMENT |
Notes on TCP input and output buffers
Ideally the TCP segment queues should be logically separate from the IP
datagram queues, but for efficiency it should be possible to have them
both together.
Input buffers are expected to be lists of datagrams/segments.
This is reasonably simple, since pointers (in known places) can just be
set up to the data (whereever it is in the datagram/segment).
There is a problem with allocation/windows in this scheme, since it
is possible to run out of datagram buffers before running out of window,
if the remote site becomes cretinous about it and sends only a few
bytes per dgram very fast. But in that case re-transmission can just
force it to buffer up its output, so that future dgrams will be somewhat
more filled, so it is probably OK. If this does become a screw, can
add code to do compaction at clock level.
Output buffers are a little more uncertain. Could have simple
circular buffer, with appropriate pointers set up so that IMP output
message is read directly from the buffer (same as NCP). Alternatively
could have queue of segments/datagrams all ready to go. Guess I'd
like to try doing the latter, to keep things "simple" by minimizing
the number of kinds of things floating around.
Problem with putting output datagram together: can't always predict
ahead of time how big the leaders are going to be! Especially true
for IP level, which TCP is not supposed to know too much about. Thus
if not careful, it could happen that output is put into a segment too
close to the start of the buffer, so that there is not enough room for
the TCP and IP headers to fit in. Have to look at this; may need to
give up notion of keeping all the packet internals nicely contiguous.
Maximum IP header length is set at 60 bytes (15 words). The maximum
TCP header length is also 15 words.
Looking at the currently defined options, it seems unlikely that ITS
will use any of them, and if so, they can be predicted fairly easily on
a per-connection basis, so things should work out okay. Note that
the IP level can always simply fragment stuff if it really wants to be
that complex.
It would be nice to be able to keep track of stuff which is on the
device (IMP) output queue but hasn't yet gone out, in order to add
last-minute bits (like ACK) or even some more data. Idea: output "queue"
is just a list of TCP connections that need attention, so can always
go in and mung stuff (even change mind about outputting) just by playing
with connection flags/lists. This is basically how NCP does it.
Re packet buffer design:
Somewhat more hypothetical is the notion of keeping a "usage
count" for each buffer, so that pointers from the packet table entries
can point to several different buffers and not just one. When a usage
count hits zero, put the buffer on the freelist. Actually this is not
really needed for the case of a table entry pointing to more than one
buffer, but it IS needed for the case of more than one table entry
pointing to the same buffer. This might happen, for example, if
an internet bypass were set up so that datagrams going to ourselves
were simply vectored directly to the input queues. But for the
time being, it probably isn't too outrageous to simply re-copy the
datagram in question. (Also better emulates a fake network device).
Suggest that lists point directly to themselves rather than
to start of entry; this allows low-level list routines to be used
on all lists. The higher-level routines of course have to know what
offsets to use for a specific list. Alternatively provide different routines
for each offset needed, and equate references to the appropriate routine
for each use. (This is what I'm trying at the moment, hence the IRPS)
May want to use format <head>,,<list ptr> where <head> is the addr
of the initial pointer (not initial node). This allows backtracking
to figure out what TCP connection or IP queue a packet belongs to.
Brute force approach is to simply have another word for the TCB index, etc.
If this stuff is general enough it could be used for CHAOS packets also.
|
COMMENT |
-- Lots of this is wrong now... --
Buffers are all 256 (400 octal) words long, and 4 of them fit on one
ITS page. This size was chosen because the maximum length of an IMP
message (not counting IMP-Host padding) is 255 words of 4 8-bit bytes
per word. This allows one extra word; not much. Taking away the
3 IMP leader words (which has to be done anyway for NCP to continue
working) gives us 4 spare words per buffer.
This still may not be enough. Rather than shoe-horn some clever stuff
into each buffer header, I am opting to maintain "Packet Entries" in a
"Packet Table" separate from the "Packet Buffers" themselves. All
messages/datagrams/segments/packets are identified by a pointer
into the table. (Could use index, as for sockets/TCBs, but this is
awkward for lists). The entry identified by the pointer will contain
the actual pointers into the buffer associated with that packet.
[NOTE: may want to have these pointers point into various places, not
necessarily all the same buffer. Must think about this.]
Free buffers are linked by a freelist pointer in their first word,
with an identifier in the second word to help GC. The only design
issue for the buffers themselves is how to set things up so that it is
easy to GC a large freelist, i.e. identify pages that have nothing
but free buffers in them and thus can be removed from the system's
address space. Currently I have simply adopted the strategem used for
CHAOS buffers (at CHCLN) to have the core job snuffle over the freelist.
Note that the low-level routines for manipulating lists are actually
referenced via macros which are given an offset as argument. This
offset refers to the offset between the node pointer and the location
of the "next" pointer in the node; the macro will assemble into a
call to the right routine for that offset. Currently only offsets
up to 2 are supported; any lists that the packet is put on must
be threaded through the first 3 words of the node, and the macros check
for this.
|
SUBTTL Packet Tracing Code
IFNDEF PKTTRC,PKTTRC==:0 ; Nonzero turns tracing code on
IF1,IFN PKTTRC,.ERR IP packet tracing code included.
COMMENT |
This code can be used to keep a history of what happens to a packet.
The history is stored in the packet buffer as a series of indexes
into a table of named events.
To trace a particular event use the TRCPKT macro.
TRCPKT(REG,"String")
REG is the register which currently contains an index to the packet
buffer table. The code is more efficient if the register is R. String
is the description of the event.
To generate the event table, you must call the TRCCOD macro somewhere
after the last call to TRCPKT.
|
%NTRCE==:77 ; Allow this many trace events. Value must be a bit mask (all
; ones) to work right. If you make it bigger than 77
; you have to change the "TRC%" in the macros to something
; shorter, too.
%%%TRC==1
; TRCCOD generates TRCTBL, which holds <code address,,address of event string>
; for each trace event.
DEFINE TRCCOD
IFN PKTTRC,[
TRC%0==:<0,,[ASCIZ /Null event/]>
TRCTBL: REPEAT %%%TRC,CONC TRC%,\.RPCNT
IF2, REPEAT %%%TRC,CONC EXPUNGE TRC%,\.RPCNT
]
TERMIN
DEFINE TRCPKT REG,&(EVENT)
IFN PKTTRC,[
IFG %%%TRC-%NTRCE,.ERR Too many packet trace events!
CONC TRC%,\%%%TRC,==:<.,,[ASCIZ EVENT]>
IFN REG-R,[
PUSH P,R
MOVE R,REG
]
PUSH P,TT
MOVEI TT,%%%TRC
PUSHJ P,PKTPTS
POP P,TT
IFN REG-R,[
POP P,R
]
%%%TRC==%%%TRC+1
]
TERMIN
IFN PKTTRC,[
; Store information in the packet history data buffer
; "Information" is a 6-bit quantity which indexes into a table
; of strings.
; TT/ Reason index
; R/ Pkt Buffer index
PKTPTS: CONO PI,PIOFF ; Freeze machine
DPB TT,PK.HSP(R) ; Store trace info
IBP PK.HSP(R) ; Bump BP
HRRZ TT,PK.HSP(R) ; Pick up history byte ref (address only)
CAIL TT,PK.HSP(R) ; If we've gotten to the bottom,
JRST [ MOVEI TT,PK.HST(R) ;Wrap around
HRLI TT,(<.BP %NTRCE_30.>) ; BP to left 6 bits
MOVEM TT,PK.HSP(R) ;Reset it to top
JRST .+1 ]
CONO PI,PION
POPJ P,
]
;;; Packet Table Entries
EBLK
IFNDEF PKBSIZ,PKBSIZ==1000 ; 512. words per packet buffer (2048 byte MTU)
IFNDEF NPKPGS,NPKPGS==40. ; # pages OK to use for packet buffers
NPKB==:<NPKPGS*<2000/PKBSIZ>> ; # packet buffers available
NPKE==:NPKB ; # packet entry nodes.
IFN NPKB-NPKE,.ERR You must fix the UFLS at PKTGF.
PKETBL: OFFSET -.
; General (device driver, etc)
PK.FLG:: 1,,PKETBL+PK.L ; General - <flags>,,<PE freelist or dev driver list>
%PKPIL==:<SETZ> ; Packet locked at PI level, being output
%PKODN==:<1000,,> ; Packet has been output (else not yet)
;;; %PKNOF==:<2000,,> ; Packet should not be freed when output done.
%PKFLS==:<4000,,> ; Flush pkt if seen on output queue (ie dont output)
%PKRTR==:<10000,,> ; Packet is being re-transmitted by TCP
.SEE %PQFLX ; Low bits of LH used for on-list flags.
PK.IP:: 0 ; IP Datagram - <IP Header ptr>,,<IP Datagram list>
; May be strung on Internet Queue, IP output queue
PK.TCP:: 0 ; TCP Segment - <TCP Header pointer>,,<TCP Segment list>
; May be strung on TCB input Q, output retransmit Q
PK.TCI:: 0 ; TCP Segment - <# bytes data><# bytes offset><TCB index>
PK%TDL==:<777700,,0> ; # octets of data in TCP segment
PK%TDO==:< 77,,770000> ; # octets data is offset from TCP header
PK%TCB==:< ,,007777> ; TCB connection index
PK$TDL==:<.BP PK%TDL,PK.TCI>
PK$TDO==:<.BP PK%TDO,PK.TCI>
PK$TCB==:<.BP PK%TCB,PK.TCI>
PK.BUF:: 0 ; General - <# wds>,,<addr of buffer>
PK.TIM:: 0 ; General - Time sent or received, int level (Sys time)
PK.DST:: 0 ; Immediate destination address if on output queue
PK.HWI:: 0 ; Hardware Information - currently KS Unibus address
IFN PKTTRC,[
PK.HST:: BLOCK 3 ; Packet trace history buffer
PK.HSP:: 0 ; Packet trace history pointer
]
PK.L:: OFFSET 0 ; Length of a Packet-Entry (PE) node
REPEAT <NPKE-1>,[
IFN .RPCNT-<NPKE-2>, 1,,.+PK.L ; Build initial freelist
.ELSE 1,,0
BLOCK PK.L-1
]
PKETBE==:.-PK.L ; Last legal PE pointer value
PKEQHF: PKETBE,,PKETBL ; Header for Packet-Entry node freelist
BBLK
; A "queue" is a list of nodes pointed to by a "queue header" word
; of format <last node>,,<first node>. Each node pointer points to
; the next node pointer (or zero if no more).
; There is a set of flags in the LH of a certain word, at offset
; PQ.FLG, that indicate which lists a node is currently on.
PQ.FLG==:PK.FLG ; Offset of word list-flags are in.
%PQFLX==0 ; Initial val
IFNDEF %%%QOF,%%%QOF==0 ; This gets set to highest offset supported
IRPS PKQGF,,[PKQGF0:PKQGF1:PKQGF2:]PKQPL,,[PKQPL0:PKQPL1:PKQPL2:]PKQPF,,[PKQPF0:PKQPF1:PKQPF2:]%PQFL,,[%PQFL0:%PQFL1:%PQFL2:]
IFG .IRPCNT-%%%QOF,%%%QOF==.IRPCNT
%PQFL==:<1_.IRPCNT,,> ; Def a flag in LH at offset PQ.FLG
%PQFLX==%PQFLX\%PQFL ; Mask of all list-flags def'd.
; PKQGF - Get first node from queue
; Q/ addr of queue header
; A/ addr of node (zero if none)
PKQGF: CONO PI,PIOFF ; Work at all levels
HRRZ A,(Q) ; Get 1st from queue header word
JUMPE A,PIONJ ; None, so return zero.
MOVSI T,(%PQFL) ; Now clear appropriate flag for list
XORB T,PQ.FLG(A) ; to indicate it's not on it any more.
TLNE T,(%PQFL) ; Paranoia plus
BUG HALT,[PK: GF node wasnt on list]
HRRZ T,.IRPCNT(A) ; Get 2nd
HRRM T,(Q) ; Make it 1st
CAIN T, ; If all's well, done.
SETZM (Q) ; Else must clear whole header
IFNDEF PIONJ,PIONJ:
CONO PI,PION
POPJ P,
; PKQPL - Put node on queue as last thing.
; Q/ addr of queue header
; A/ addr of node
PKQPL: TRNN A,-1 ; More paranoia
BUG HALT,[PK: zero node ptr]
HLLZS .IRPCNT(A) ; Say this node is last one
CONO PI,PIOFF ; Work at all levels
MOVSI T,(%PQFL) ; Paranoia: Set appropriate flag for list
XORB T,PQ.FLG(A) ; to indicate it's on it now.
TLNN T,(%PQFL) ; plus check...
BUG HALT,[PK: node already on list]
HLRZ T,(Q) ; Get last node
HRLM A,(Q) ; Point to new last node
JUMPN T,[HRRM A,.IRPCNT(T) ; Make prev last node point to new last
JRST .+2] ; Skip over next instr!!
HRRM A,(Q) ; Queue was empty, make this the new first too
CONO PI,PION
POPJ P,
; PKQPF - Put node on queue as first thing.
; Q/ addr of queue header
; A/ addr of node
PKQPF: TRNN A,-1 ; Yes more paranoia
BUG HALT,[PK: zero node ptr]
CONO PI,PIOFF
MOVSI T,(%PQFL) ; Paranoia: Set appropriate flag for list
XORB T,PQ.FLG(A) ; to indicate it's on it now.
TLNN T,(%PQFL) ; check...
BUG HALT,[PK: node already on list]
HRRZ T,(Q) ; Get first thing
CAIN A,(T) ; paranoia, avoid loops to self
BUG
HRRM T,.IRPCNT(A) ; Make it second thing
HRRM A,(Q) ; Make new first thing
CAIN T,
HRLM A,(Q) ; Was empty, also make it last thing.
CONO PI,PION
POPJ P,
TERMIN
; Define PKQGF, etc so that they actually reference PKQGF0, etc as
; appropriate for the given offset.
IRP RTN,,[PKQGF,PKQPF,PKQPL]
DEFINE RTN ?OFFST=0,
CONC RTN,\OFFST
IFG OFFST-%%%QOF,.ERR RTN used with bad offset
TERMIN
TERMIN
; PKEGF - Get a free Packet-Entry node
; Clears node contents.
; Clobbers Q,T
; Returns A/ PE ptr (0 if none)
PKEGF: MOVEI Q,PKEQHF
IFE PKTTRC,[
CALRET PKQGF ; Get a node
]
IFN PKTTRC,[
CALL PKQGF
JUMPE A,CPOPJ ; No packet
SETZM PK.HST(A)
SETZM PK.HST+1(A)
SETZM PK.HST+2(A)
MOVEI Q,PK.HST(A) ; Build byte ref to history trail
HRLI Q,(<.BP %NTRCE_30.>) ; (dpb ref)
MOVEM Q,PK.HSP(A) ; save ref
POPJ P,
]
; PKERT - Return a Packet-Entry node to freelist
; A/ PE ptr to node
; Clobbers Q,T
PKERT: MOVEI Q,PKEQHF ; Use Packet-Entry freelist
CALRET PKQPF ; Put back on start of list.
; Note that all MP calls to the routines below which allocate or free
; entries/buffers must be sure not to block (page fault or UFLS)
; while any "loose" entries/buffers exist (not pointed to by any list)
; unless there something on the PCLSR locked-switch list which will return the
; currently "loose" entry/buffer to its freelist -- otherwise
; it is possible for "loose" stuff to slowly accumulate.
; PKTGF - Get a free Packet-Entry node and Packet Buffer. Hangs until
; it wins. Note that it depends on fact there is one PE node
; for every packet buffer, and vice versa! If this becomes untrue
; then the way it UFLSes should be fixed up.
; PKTGFI - version that skips if wins, doesn't hang.
; Returns A/ PE ptr Clobbers Q,T
PKTGF: SKIPN PKEQHF ; Fast check, see if any packet entries/buffers free
CALL UFLS ; Nope, hang until something turns up.
CALL PKTGFI ; Get a entry/buffer!
JRST PKTGF ; None? Sigh, go hang.
RET
PKTGFI: CALL PKEGF ; Get a free node
JUMPE A,CPOPJ
PUSH P,A ; Save pointer to it
PKTGF1: CALL PKBGF ; Get a free buffer
JUMPN A,PKTGF8 ; Jump if found one right away!
CALL PKBAL ; None left on freelist, try to allocate more.
CAIA ; Sigh, failed.
JRST PKTGF1 ; Won, go pluck a buffer from freelist.
; Lost, can't get any more buffers.
POP P,A ; None available, take non-skip return
CALRET PKERT ; Put PE node back on its freelist.
; Won, store buffer pointer in PE.
PKTGF8: MOVE T,A
POP P,A ; Restore PE ptr
MOVEM T,PK.BUF(A)
MOVE T,PQ.FLG(A) ; Paranoia dept, verify not on any lists.
TLNE T,(%PQFLX)
BUG HALT,[PK: Freelist node not free!]
SETZM PK.FLG(A) ; Zap all other entries in packet node.
SETZM PK.IP(A)
SETZM PK.TCP(A)
SETZM PK.TCI(A)
SETZM PK.TIM(A)
AOS (P) ; Win, skip on return!
RET
; PKTRT - Return both a Packet-Entry and its associated buffer to freelist
; only if check shows that it doesn't belong to any lists.
; PKTRTA - Always return to freelist. If check shows that it is still
; on some list, bad error!
; Clobbers A,Q,T
; A/ PE ptr (must be off all lists)
PKTRTA: CAIL A,PKETBL ; Paranoia check for legal pointers
CAILE A,PKETBE
BUG HALT,[PK: Bad PE pointer]
MOVE T,PQ.FLG(A)
TLNE T,(%PQFLX\%PKPIL) ; On list or locked at I/O PI level?
BUG HALT,[PK: Freeing packet still in use!]
JRST PKTRTX ; Nope, can proceed to put on freelist.
PKTRT: CAIL A,PKETBL ; Paranoia check for legal pointers
CAILE A,PKETBE
BUG HALT,[PK: Bad PE pointer]
MOVE T,PQ.FLG(A)
TLNE T,(%PQFLX\%PKPIL) ; On a list or locked by interface PI level?
RET ; Yes, don't return to freelist yet.
PKTRTX: PUSH P,A ; Save PE ptr
SKIPE A,PK.BUF(A) ; Get buffer pointer associated with PE
CALL PKBRT ; Return the buffer
POP P,A
SETZM PK.BUF(A) ; Ensure buffer pointer zapped.
CALRET PKERT ; Then return the packet entry
; PKTPCL - Return a packet entry/buffer while PCLSR'ing.
; This is the standard LOSSET routine to use.
; A must hold the PE ptr at time of the block (which we are backing
; out of).
; Must only clobber A and T!!
PKTPCL: MOVE A,AC0S+A(U) ; Get ac A at time of the block
PUSH P,Q ; Mustn't clobber Q
CALL PKTRT ; Return the entry/buffer (clobbers Q,T)
JRST POPQJ
EBLK
PKBNF: 0 ; # free Packet Buffers
PKBNT: 0 ; # total Packet Buffers
PKBCTM: 0 ; Time of last no-more-core complaint
PKBQHF: 0 ; Queue Header for buffer freelist
PKBQHC: 0 ; Queue Header for core job cleanup
BBLK
; PKBGF - Get a free Packet Buffer
; Clobbers Q,T
; Returns A/ PB ptr (0 if none)
PKBGF: MOVEI Q,PKBQHF ; Point to buffer freelist
CALL PKQGF ; Get first thing off it
JUMPE A,CPOPJ ; If got nothing, just return.
SETZM 1(A) ; Aha, got it! Flush free-buffer identifier.
SOS PKBNF ; Decrement # free packet buffers.
RET
; PKBRT - Return a Packet Buffer to freelist. Puts back at END of freelist,
; as PKBCLN clean-up depends on this.
; Clobbers Q,T
PKBRT: SETZM (A) ; Paranoia aid - clear "flags" in LH of 1st wd.
; Otherwise PKQ routines complain.
MOVE T,[SIXBIT /BRUNCH/]
MOVEM T,1(A) ; Set up free-buffer identifier
AOS PKBNF ; Increment # free packet buffers.
MOVEI Q,PKBQHF ; Point to buffer freelist
CALRET PKQPL ; Put it back on, at end.
; PKBRTL - Return a list of Packet Buffers to freelist
; Q/ ptr to queue header of list
; Clobbers A,T
PKBRTL: CALL PKQGF ; Get first thing off list
JUMPE A,CPOPJ
PUSH P,Q
CALL PKBRT ; Return it to buffer freelist
POP P,Q
JRST PKBRTL
; PKBAL - Allocate more Packet Buffers
; Clobbers A,Q,T
; Returns .+1 if lost
; .+2 if won (must still call PKBGF to get a buffer from list)
PKBAL: PUSH P,B
CONI PI,Q ; Save PI channel-on status
ANDI Q,177
CONO PI,UTCOFF ; Make the world safe for IOMQ
MOVE B,PKBNT ; Check total # of buffers so far
CAIL B,NPKB ; Make sure we're not already using max allowed
JRST PKBAL4 ; Ugh, already at max! Go complain.
PUSHJ P,IOMQ ; Get 1K of memory
JRST PKBAL3 ; Mem not available, fail
CONO PI,PICON(Q) ; Won, restore PI status
MOVEI B,MUPKT ; Set page type = packet
DPB B,[MUR,,MEMBLT(A)]
LSH A,10. ; Turn allocated page # into mem address
HRLI A,-<2000/PKBSIZ> ; Make AOBJN into page (# buffers per page)
PKBAL2: PUSHJ P,PKBRT ; Put them all on free list
ADDI A,PKBSIZ-1
AOBJN A,PKBAL2
MOVEI B,<2000/PKBSIZ> ; This many more buffers have been created
ADDM B,PKBNT ; Increase total (PKBNF bumped by PKBRT)
POP P,B
AOS (P) ; Take win return.
RET
; Here if packet stuff trying to use up too much core
PKBAL4: MOVE B,PKBCTM ; Don't complain too often
ADDI B,60.*30. ; Just once a minute
CAMLE B,TIME
JRST PKBAL3
BUG CHECK,[PACKET NET ATTEMPTING TO USE TOO MUCH CORE]
MOVE B,TIME
MOVEM B,PKBCTM
PKBAL3: CONO PI,PICON(Q) ; Lost, restore PI status
POP P,B
POPJ P, ; and take error return.
; PKBCLN - Called only by core job, to clean up packet buffers.
; Smashes all ACs.
PKBCLN: SKIPE A,PKBNT ; See if 2/3 or more of buffers free
SKIPN B,PKBNF
POPJ P, ; No buffers or none free, nothing to do
SUBM A,B
IDIV A,B ; Get ratio of total to used
CAIGE A,3 ; Note if B is zero, A is unchanged
POPJ P, ; and at least 32.
IFL TSYSM-256., MOVEI D,TSYSM-1 ; Scan memory for packet buffer pages
.ELSE MOVEI D,255.
PKBCL0: LDB A,[MUR,,MEMBLT(D)]
CAIE A,MUPKT
PKBCL4: SOJGE D,PKBCL0
JUMPL D,CPOPJ
MOVE A,D ; Quickly determine if any non-free buffers
LSH A,10. ; on this page
HRLI A,-<2000/PKBSIZ>
MOVE T,[SIXBIT/BRUNCH/]
PKBCL5: CAME T,1(A)
JRST PKBCL4 ; Not free, don't bother with slow stuff
ADDI A,PKBSIZ-1
AOBJN A,PKBCL5
SETZB C,PKBQHC ; Collect all free buffers on this page
MOVE E,PKBNF ; Loop about as many times as there are free buffers
PKBCL1: PUSHJ P,PKBGF ; Get next free buffer
JUMPE A,PKBCL2
LDB B,[121000,,A]
CAMN B,D
JRST [ MOVEI Q,PKBQHC ; This one's on the page, save it
PUSHJ P,PKQPL
AOJA C,.+2 ] ; Count them
PUSHJ P,PKBRT ; Not on the page, put back. This depends on
; the fact PKBRT puts back at END of list!
SOJG E,PKBCL1
PKBCL2: CAIE C,<2000/PKBSIZ> ; Did we get the whole page?
JRST [ MOVEI Q,PKBQHC ; No, must punt this one, and
PUSHJ P,PKBRTL ; return all the buffers we saved up.
JRST PKBCL4]
MOVNS C ; Yes, get rid of these buffers
ADDM C,PKBNT ; Decrement total # of buffers in use
MOVE A,D
PUSHJ P,MEMR ; Flush the page from addr space
JRST PKBCLN ; Back to flush more, until quota done.
Reference in New Issue View Git Blame Copy Permalink