mirror of
https://github.com/PDP-10/klh10.git
synced 2026-01-11 23:52:54 +00:00
37 lines
1.2 KiB
INI
37 lines
1.2 KiB
INI
; KLH10 emulator configuration for KN ITS system.
|
|
|
|
; Define basic KS10 device config - two RH11s each on its own Unibus
|
|
|
|
devdef rh0 ub1 rh11 addr=776700 br=6 vec=254
|
|
devdef rh1 ub3 rh11 addr=772440 br=6 vec=224
|
|
|
|
; Provide one disk, one tape in config ITS expects
|
|
|
|
devdef dsk0 rh0.0 rp type=rp06 format=dbd9 path=PI-ITS-RP06.0-dbd9 iodly=0
|
|
devdef mta0 rh1.0 tm02 fmtr=tm03 type=tu45
|
|
|
|
; ITS wants a 60Hz clock, allow it. Need this until defaults OK.
|
|
set clk_ithzfix=60
|
|
|
|
; Define IMP for KN
|
|
devdef imp ub3 lhdh addr=767600 br=6 vec=250 ipaddr=10.134.198.236 gwaddr=10.0.0.1
|
|
; Add the following parameters for the different connection methods:
|
|
; TUN: ifmeth=tun if=tun0
|
|
; TAP+BRIDGE: ifmeth=tap+bridge if=tap0
|
|
; PCAP: ifmeth=pcap if=re0
|
|
; TAP: ifmeth=tap if=tap0 !! you should do some routing!
|
|
|
|
; Dummy definitions. Only one DZ is still (apparently) needed.
|
|
devdef dz0 ub3 dz11 addr=760010 br=5 vec=340
|
|
;devdef dz1 ub3 dz11 addr=760020 br=5 vec=350
|
|
;devdef chaos ub3 ch11 addr=764140 br=5 vec=270
|
|
|
|
; Define new HOST device hackery
|
|
devdef idler ub3 host addr=777000
|
|
|
|
; Preload ITS for convenience
|
|
load @.its-647kn-u
|
|
|
|
; Use "GO 774000" to start DDT, else just "GO" to start ITS
|
|
|