github.com/PDP-10.stacken
1
0
Fork 0
mirror of https://github.com/PDP-10/stacken.git synced 2026-03-07 11:17:06 +00:00
Code Issues Projects Releases Wiki Activity
Files
master
PDP-10.stacken/files/stacken-tape-backup/dskb:10_7/dil/dildoc/dil.doc
Lars Brinkhoff 6e18f5ebef Extract files from tape images. 
Some tapes could not be extracted.
2021-01-29 10:47:33 +01:00

2457 lines
81 KiB
Plaintext
Raw Permalink Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
DIL.DOC -- V2.1(142) 25-Jul-86 Page i
COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1983, 1986.
ALL RIGHTS RESERVED.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
TRANSFERRED.
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
DIL.DOC -- V2.1(142) 25-Jul-86 Page ii
Table of Contents
1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . 1
2.0 SUMMARY . . . . . . . . . . . . . . . . . . . . . . 1
3.0 PRODUCT SOURCES . . . . . . . . . . . . . . . . . . 1
4.0 EXTERNAL CHANGES . . . . . . . . . . . . . . . . . . 2
5.0 COMPATIBILITY WITH DIL V1.0 . . . . . . . . . . . . 2
6.0 KNOWN BUGS AND DEFICIENCIES . . . . . . . . . . . . 3
7.0 DECSYSTEM-20 INSTALLATION INSTRUCTIONS . . . . . . . 4
7.1 File Contents . . . . . . . . . . . . . . . . . . 4
7.1.1 First Save Set: Documentation Files . . . . . . . 4
7.1.2 Second Save Set: SUBSYS Files . . . . . . . . . . 4
7.1.3 Third Save Set: Sources . . . . . . . . . . . . . 5
7.1.4 Fourth Save Set: REL Files . . . . . . . . . . . . 7
7.1.5 Fifth Save Set: Installation Verification Files . 7
7.2 DECSYSTEM-20 Installation . . . . . . . . . . . . 7
7.3 Special Considerations . . . . . . . . . . . . . . 9
8.0 DECsystem-10 INSTALLATION INSTRUCTIONS . . . . . . 10
8.1 File Contents . . . . . . . . . . . . . . . . . 10
8.1.1 Documentation . . . . . . . . . . . . . . . . . 10
8.1.2 Libraries And Interface Support Files . . . . . 10
8.1.3 Sources . . . . . . . . . . . . . . . . . . . . 11
8.1.4 Autopatch Files . . . . . . . . . . . . . . . . 12
8.1.5 Installation Verification . . . . . . . . . . . 13
8.2 DECsystem-10 Installation . . . . . . . . . . . 13
8.3 Special Considerations . . . . . . . . . . . . . 16
9.0 VAX/VMS INSTALLATION INSTRUCTIONS . . . . . . . . 17
9.1 CONVENTIONS . . . . . . . . . . . . . . . . . . 17
9.2 VAX DIL INSTALLATION PROCEDURE . . . . . . . . . 17
9.2.1 Components Of The VAX DIL Facility . . . . . . . 17
9.2.2 The Installation Procedure . . . . . . . . . . . 18
9.2.3 Installing VAX DIL . . . . . . . . . . . . . . . 19
9.2.4 Running The VMSINSTAL.COM Procedure . . . . . . 19
9.2.5 Phase 1: Copying The Kit To The Installation
Device . . . . . . . . . . . . . . . . . . . . . 20
9.2.5.1 Backing Up The System Disk . . . . . . . . . . . 20
9.2.5.2 Specifying The Device Name . . . . . . . . . . . 20
9.2.5.3 Specifying The Product Name . . . . . . . . . . 21
9.2.5.4 Copying The Kit Onto The Installation Device . . 21
9.2.6 Phase 2: The Installation . . . . . . . . . . . 21
9.2.6.1 Deciding Whether To PURGE Files . . . . . . . . 22
9.2.6.2 Sources . . . . . . . . . . . . . . . . . . . . 22
9.2.6.3 The Installation . . . . . . . . . . . . . . . . 23
9.2.7 Phase 3: The Installation Verification Procedure 23
9.2.7.1 The COBOL IVP Tests . . . . . . . . . . . . . . 24
9.2.7.2 The FORTRAN IVP Tests . . . . . . . . . . . . . 25
9.2.7.3 End Of The IVP . . . . . . . . . . . . . . . . . 27
9.2.7.4 End Of The Installation . . . . . . . . . . . . 27
9.3 LOG OF A SAMPLE INSTALLATION OF DIL . . . . . . 27
9.4 FILES CREATED OR MODIFIED BY THE DIL INSTALLATION
PROCEDURE . . . . . . . . . . . . . . . . . . . 31
10.0 INSTALLATION VERIFICATION SYSTEM . . . . . . . . . 33
10.1 TOPS-20 Installation Verification . . . . . . . 35
10.2 TOPS-10 Installation Verification . . . . . . . 37
10.3 VAX/VMS Installation Verification . . . . . . . 39
DIL.DOC -- V2.1(142) 25-Jul-86 Page iii
Table of Contents
11.0 PRODUCT CHANGES . . . . . . . . . . . . . . . . . 40
12.0 SUGGESTIONS . . . . . . . . . . . . . . . . . . . 40
13.0 DATA INTERCHANGE LIBRARY SAMPLE APPLICATION . . . 41
13.1 Description . . . . . . . . . . . . . . . . . . 41
13.2 Running The Sample Application . . . . . . . . . 42
14.0 BUILDING DIL . . . . . . . . . . . . . . . . . . . 43
15.0 BUILDING DIL ON TOPS-10 . . . . . . . . . . . . . 43
16.0 BUILDING DIL ON TOPS-20 . . . . . . . . . . . . . 46
17.0 BUILDING DIL ON VAX/VMS . . . . . . . . . . . . . 47
DIL.DOC -- V2.1(142) 25-Jul-86 Page 1
INTRODUCTION
1.0 INTRODUCTION
This document describes how to install version 2.1 of the Data
Interchange Library (DIL) on a DECSYSTEM-20, DECsystem-10 or VAX/VMS
system.
This manual is intended for the system manager responsible for
installing and maintaining the DIL.
You can find additional information in the DIL User Reference Manual.
2.0 SUMMARY
The Data Interchange Library (DIL) is a set of subroutines which
provide some basic capabilities for distributed applications. The
capabilities include moving ASCII and binary data between similar or
dissimilar systems, and converting between data formats in the same
class (string, fixed point integer (including binary fixed point,
packed decimal and display numeric types), and floating point). These
routines are callable from COBOL and FORTRAN on TOPS-10, TOPS-20, and
VAX/VMS systems.
On TOPS-20 systems, DIL Version 2.1 will run under TOPS-20 version 5.1
or later monitors and under TOPS-20 version 4.1 or later monitors for
2020 processors. On VAX systems, DIL Version 2.1 will run under VMS
3.1 or later monitors. On TOPS-10 systems, DIL Version 2.1 will run
under TOPS-10 version 7.02 or later monitors.
Refer to the beware file, DIL.BWR, for hints and potential problems.
3.0 PRODUCT SOURCES
The DIL V2.1 kit contains product sources in machine readable form.
These sources are included only as a reference and are not warranted
or supported by Digital Equipment Corporation.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 2
EXTERNAL CHANGES
4.0 EXTERNAL CHANGES
The following new functions were added to DIL for Version 2.1.
o DATA CONVERSION -- TOPS-10, TOPS-20 and VAX/VMS
The data conversion routines have been expanded to include
two new data classes: packed decimal and display numeric
types.
Cross class conversion is now provided between all types of
fixed point integer data. Fixed point binary, packed decimal
and display numeric classes can all be converted to each
other.
o TASK-TO-TASK and REMOTE FILE ACCESS -- TOPS-10
The full set of task-to-task and remote file access routines
is now provided for TOPS-10 systems. Previously, these
routines were available for only TOPS-20 and VAX/VMS systems.
DIL Version 2.1 can be used in a network that supports any
combination of VAX/VMS, TOPS-10 and TOPS-20 systems.
o TASK-TO-TASK ROUTINES -- TOPS-10, TOPS-20 and VAX/VMS
Two new task-to-task functions have been added for all
supported systems:
Send a single interrupt data message over a logical link.
Receive a single interrupt data message over a logical
link.
o DOCUMENTATION
A new manual was provided with DIL Version 2.0.
5.0 COMPATIBILITY WITH DIL V1.0
You can use DIL V2.1 with any of your DIL V1.0 or DIL V2.0
applications.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 3
KNOWN BUGS AND DEFICIENCIES
6.0 KNOWN BUGS AND DEFICIENCIES
There are no known bugs or deficiencies as of 25-Jul-86.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 4
DECSYSTEM-20 INSTALLATION INSTRUCTIONS
7.0 DECSYSTEM-20 INSTALLATION INSTRUCTIONS
7.1 File Contents
7.1.1 First Save Set: Documentation Files -
DIL.BWR contains hints and information about potential problems.
DIL.DOC is this file.
DIL.HLP is the help file for TOPS-10/TOPS-20.
The following programs make up the DIL sample application. These are
provided as examples only. They will not run without some
customization for your local network topology.
IDXINI.CBL
JTSERV.CBL
JTTERM.CBL
JTTERM.VAX-COB
JTVRPT.CBL
PROCES.MAC
7.1.2 Second Save Set: SUBSYS Files -
DIL.REL is the library to search when linking programs with the DIL.
DIL.LIB is a COBOL copy library containing statements which define
names for various special codes used to select options and the like.
Elements in DIL.LIB may be COPY'd into user programs as described in
the DIL manual. DIL.LIB is not needed if your site will not be using
the DIL from COBOL programs.
DILV7.FOR, DIXV7.FOR, DITV7.FOR: These files are the FORTRAN
equivalent of the COBOL copy library members contained in DIL.LIB,
above. They may be INCLUDE'd into user programs to define names for
DIL codes. The files are for use with TOPS-20 FORTRAN Version 7 or
later. Details on when and how to include them, and how to use the
codes, are given in the DIL documentation. None of the files are
necessary unless explicitly referenced from user programs (or the
installation verification procedure).
B362LB.REL is the run-time support library for BLISS. Install this
only if you don't already have BLISS Version 3 or Version 4 on your
system.
XPORT.REL is a transportable support library needed by the DIL code.
Install this only if you don't already have BLISS Version 3 or Version
4 on your system.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 5
DECSYSTEM-20 INSTALLATION INSTRUCTIONS
7.1.3 Third Save Set: Sources -
The following are the DIL sources for TOPS-20. These sources are
provided for reference only and are not warranted or supported by
Digital Equipment Corporation.
o BLISSNET.REQ
o BLISSNET-DESCRIPTOR.REQ
o BLISSNET20.R36
o BUILD-DIL.CTL
o COMPDL.CTL
o COMPDT.CTL
o COMPDX.CTL
o CONDIT.REQ
o COPYRI.BLI
o CPYRIT.MAC
o DAP.BLI
o DAP-BLOCKS.REQ
o DAP-CODES.REQ
o DAP-MACROS.REQ
o DAP1A-DIL.CTL
o DAPERR.BLI
o DAPHST.BLI
o DAPPER.B36
o DAPSUB.BLI
o DAPT20.B36
o DIL-DEF.CMD
o DILC36.INT
o DILHST.BLI
o DILINT.BLI
o DILSWI.REQ
o DIR20.B36
o DIRECT.BLI
o DIRLST.BLI
o DITC36.INT
o DITHST.BLI
o DIXCST.BLI
o DIXDEB.BLI
o DIXDEB.REQ
o DIXDN.BLI
o DIXFBN.BLI
o DIXFP.BLI
o DIXGBL.BLI
o DIXGEN.BLI
o DIXHST.BLI
o DIXLIB.BLI
o DIXPD.BLI
o DIXREQ.REQ
o DIXSTR.BLI
o DIXSWI.REQ
o DIXUTL.BLI
DIL.DOC -- V2.1(142) 25-Jul-86 Page 6
DECSYSTEM-20 INSTALLATION INSTRUCTIONS
o EXT1A-DIL.CTL
o EXTHST.BLI
o FIELDS.BLI
o FT10.MAC
o FT20.MAC
o GETPUT.BLI
o INTERFILS.BLI
o INTERFILS.CTL
o JSYSDEF.R36
o M11FIL.B36
o MAKDIL.CTL
o NXTF20.B36
o NXTFIL.BLI
o OPEN.BLI
o POS20.BLI
o POSGEN.BLI
o RDWRIT.B36
o RMS.R36
o RMSBLK.R36
o RMSERR.B36
o RMSINT.R36
o RMSLIB.R36
o RMSUSR.R36
o SETAI.BLI
o STAR36.BLI
o STRING.B36
o TOPS20.R36
o TRACE.BLI
o TTT.MAC
o UNDECLARE.REQ
o VERSION.REQ
o XPN1A-DIL.CTL
o XPNCLO.B36
o XPNDIS.B36
o XPNERR.B36
o XPNEVE.B36
o XPNFAI.B36
o XPNGET.B36
o XPNHST.BLI
o XPNOPN.B36
o XPNPMR.B36
o XPNPSI.MAC
o XPNPUT.B36
o XPNUTL.B36
DIL.DOC -- V2.1(142) 25-Jul-86 Page 7
DECSYSTEM-20 INSTALLATION INSTRUCTIONS
7.1.4 Fourth Save Set: REL Files -
These files are necessary to rebuild DIL with patches. In particular,
this save set includes the files necessary to apply autopatch tapes to
the DIL. These files should be installed into the DIL autopatch
directory.
DIL2V2.REL
DIT2V2.REL
DIX2V2.REL
DAP2V1.REL
XPN2V1.REL
7.1.5 Fifth Save Set: Installation Verification Files -
The following files are provided for installation verification:
o C36T2.CBL -- COBOL data conversion test
o CD36T1.CBL -- COBOL remote file access test
o CT36T1.CBL -- COBOL task-to-task test
o F7T2.FOR -- FORTRAN V7 data conversion test
o FD7T1.FOR -- FORTRAN V7 remote file access test
o FT7T1.FOR -- FORTRAN V7 task-to-task test
o ICSCBL.CTL -- COBOL verification control file
o ICSF7.CTL -- FORTRAN V7 verification control file
7.2 DECSYSTEM-20 Installation
The first step in installation should be to restore the files from the
documentation save-set to disk, and read DIL.DOC (this file) and
DIL.BWR.
This can be done by setting MTA0: unavailable to MOUNTR (if you
normally use labelled tapes), mounting the distribution tape on MTA0:,
defining DOC: as the directory into which you want to restore the
documentation files, and typing the following commands:
DUMPER
TAPE MTA0:
REWIND
DENSITY 1600
RESTORE PS:<*>*.* DOC:*.*.-1
EXIT
PRINT DOC:DIL.DOC, DOC:DIL.BWR
DIL.DOC -- V2.1(142) 25-Jul-86 Page 8
DECSYSTEM-20 INSTALLATION INSTRUCTIONS
After reading DIL.DOC and DIL.BWR, proceed with the installation by
moving the help file to the help directory, and then restoring the
appropriate files from the tape to SYS:, as follows:
COPY DOC:DIL.HLP HLP:
DUMPER
TAPE MTA0:
REWIND
DENSITY 1600
SKIP 1
RESTORE PS:<*>DIL.LIB SYS:*.*.-1, -
PS:<*>DIL.REL SYS:*.*.-1, -
PS:<*>DILV7.FOR SYS:*.*.-1, -
PS:<*>DITV7.FOR SYS:*.*.-1, -
PS:<*>DIXV7.FOR SYS:*.*.-1
EXIT
There are two special files that may or may not be needed on your
system. Please refer to the discussion above in section "Second Save
set: SUBSYS Files," and the discussion below in section "Special
Considerations (TOPS-20)." To restore both of them to SYS:, type the
following commands:
DUMPER
TAPE MTA0:
REWIND
DENSITY 1600
SKIP 1
RESTORE PS:<*>B362LB.REL SYS:*.*.-1, -
PS:<*>XPORT.REL SYS:*.*.-1
EXIT
To be able to run the installation certification system, you must
restore additional files. Mount the tape on MTA0:, define DILTST: to
point to the directory you want to put the ICS files in (we suggest
PS:<DIL-TEST>; see 6.0, "Installation Verification System," below),
and type the following commands:
DUMPER
TAPE MTA0:
REWIND
SKIP 4
RESTORE PS:<*>C36T2.CBL DILTST:*.*.-1, -
PS:<*>CD36T1.CBL DILTST:*.*.-1, -
PS:<*>CT36T1.CBL DILTST:*.*.-1, -
PS:<*>F7T2.FOR DILTST:*.*.-1, -
PS:<*>FD7T1.FOR DILTST:*.*.-1, -
PS:<*>FT7T1.FOR DILTST:*.*.-1, -
PS:<*>ICSCBL.CTL DILTST:*.*.-1, -
PS:<*>ICSF7.CTL DILTST:*.*.-1
EXIT
DIL.DOC -- V2.1(142) 25-Jul-86 Page 9
DECSYSTEM-20 INSTALLATION INSTRUCTIONS
To be able to apply autopatch to the DIL, you must install the files
listed below into the DIL autopatch library directory, referred to
below by logical name DILAP:. This may be done by mounting the
distribution tape on MTA0:, defining DILAP: to point to the directory
you wish to restore the files into, and typing the following commands:
DUMPER
TAPE MTA0:
REWIND
SKIP 3
RESTORE PS:<*>DAP2V1.REL DILAP:*.*.-1, -
PS:<*>DIL2V2.REL DILAP:*.*.-1, -
PS:<*>DIT2V2.REL DILAP:*.*.-1, -
PS:<*>DIX2V2.REL DILAP:*.*.-1, -
PS:<*>XPN2V1.REL DILAP:*.*.-1
EXIT
To install the DIL sources for TOPS-20, mount the distribution tape on
MTA0:, define DILSRC: to point to the directory you wish to restore
the sources into, and type the following commands:
DUMPER
TAPE MTA0:
REWIND
SKIP 2
RESTORE PS:<*>*.* DILSRC:*.*.-1
EXIT
7.3 Special Considerations
The B362LB.REL (BLISS run-time library) and the XPORT.REL
(transportable support library) shipped with the DIL are the current
field-image versions; if you have BLISS Version 3 or 4 installed,
there is no need to install either of these two files.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 10
DECsystem-10 INSTALLATION INSTRUCTIONS
8.0 DECsystem-10 INSTALLATION INSTRUCTIONS
8.1 File Contents
8.1.1 Documentation -
DIL.BWR contains hints and information about potential problems.
DIL.DOC is this file.
DIL.HLP is the help file for TOPS-10/TOPS-20.
The following programs make up the DIL sample application. These are
provided as examples only. They will not run without some
customization for your local network topology.
IDXINI.CBL
JTSERV.CBL
JTTERM.CBL
JTTERM.COB
JTVRPT.CBL
PROCES.MAC
8.1.2 Libraries And Interface Support Files -
DIL.REL is the library to search when linking programs with the DIL.
DIL.LIB is a COBOL copy library containing statements which define
names for various special codes used to select options and the like.
Elements in DIL.LIB may be COPY'd into user programs as described in
the DIL manual. DIL.LIB is not needed if your site will not be using
the DIL from COBOL programs.
DILV7.FOR, DIXV7.FOR, DITV7.FOR: These files are the FORTRAN
equivalent of the COBOL copy library members contained in DIL.LIB,
above. They may be INCLUDE'd into user programs to define names for
DIL codes. The files are for use with TOPS-10 FORTRAN Version 7 or
later. Details on when and how to include them, and how to use the
codes, are given in the DIL documentation. None of the files are
necessary unless explicitly referenced from user programs (or the
installation verification procedure).
B361LB.REL is a necessary run-time support library. You should only
install this if you do not have Version 3 or Version 4 of BLISS-36
installed on your system.
XPORT.REL is a transportable support library needed by the DIL code.
You should only install this if you do not have Version 3 or Version 4
of BLISS-36 on your system.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 11
DECsystem-10 INSTALLATION INSTRUCTIONS
8.1.3 Sources -
The following are the DIL sources for TOPS-10. These sources are
provided for reference only and are not warranted or supported by
Digital Equipment Corporation.
o CPYRIT.MAC
o DILC36.INT
o DILHST.BLI
o DILINT.BLI
o DILSWI.REQ
o DLCM10.CTL
o DLMK10.CTL
o INTR10.CTL
o POS20.BLI
o POSGEN.BLI
o DIXCST.BLI
o DIXDEB.BLI
o DIXDN.BLI
o DIXFBN.BLI
o DIXFP.BLI
o DIXGBL.BLI
o DIXGEN.BLI
o DIXHST.BLI
o DIXLIB.BLI
o DIXPD.BLI
o DIXREQ.REQ
o DIXSTR.BLI
o DIXSWI.REQ
o DIXUTL.BLI
o DXCM10.CTL
o FIELDS.BLI
o INTERF.BLI
o STAR36.BLI
o VERSIO.REQ
o DAPPER.B36
o DITC36.INT
o DITHST.BLI
o DTCM10.CTL
o FT10.MAC
o RMSUSR.R36
o TTT.MAC
o BLISSN.REQ
o BLSN10.R36
o BLSNDE.REQ
o XPN1A.CTL
o XPNCLO.B36
o XPNDIS.B36
o XPNERR.B36
o XPNEVE.B36
o XPNFAI.B36
DIL.DOC -- V2.1(142) 25-Jul-86 Page 12
DECsystem-10 INSTALLATION INSTRUCTIONS
o XPNGET.B36
o XPNHST.BLI
o XPNOPN.B36
o XPNPMR.B36
o XPNPSI.MAC
o XPNPUT.B36
o XPNUTL.B36
o COPYRI.BLI
o DAP.BLI
o DAP1A.CTL
o DAPBLK.REQ
o DAPCOD.REQ
o DAPERR.BLI
o DAPHST.BLI
o DAPMAC.REQ
o DAPSUB.BLI
o DAPT10.B36
o DIR10.B36
o DIRECT.BLI
o DIRLST.BLI
o GETPUT.BLI
o M11FIL.B36
o NXTF20.B36
o NXTFIL.BLI
o OPEN.BLI
o RDWRIT.B36
o SETAI.BLI
o STRING.B36
o TRACE.BLI
o CONDIT.REQ
o EXT1A.CTL
o EXTHST.BLI
o RMS.R36
o RMSBLK.R36
o RMSERR.B36
o RMSLIB.R36
o UUODEF.R36
o DIL.CTL
o DILDEF.CCL
8.1.4 Autopatch Files -
These files are necessary to rebuild DIL with patches. In particular,
this save set includes the files necessary to apply autopatch tapes to
the DIL. These files should be installed into the DIL autopatch
directory.
DIL1V2.REL
DIX1V2.REL
DIT1V2.REL
DIL.DOC -- V2.1(142) 25-Jul-86 Page 13
DECsystem-10 INSTALLATION INSTRUCTIONS
DAP1V1.REL
XPN1V1.REL
8.1.5 Installation Verification -
The following files are provided for installation verification:
o C36T2.CBL -- COBOL data conversion test
o CD36T1.CBL -- COBOL remote file access test
o CT36T1.CBL -- COBOL task-to-task test
o F7T2.FOR -- FORTRAN V7 data conversion test
o FD7T1.FOR -- FORTRAN V7 remote file access test
o FT7T1.FOR -- FORTRAN V7 task-to-task test
o ICSCBL.CTL -- COBOL verification control file
o ICSF7.CTL -- FORTRAN V7 verification control file
8.2 DECsystem-10 Installation
To install DIL Version 2.1 on your system, copy the files DIL.REL,
DIL.LIB, DILV7.FOR, DIXV7.FOR, DITV7.FOR from the distribution tape to
SYS:. If you will not be using the DIL from COBOL, DIL.LIB may be
omitted. If you will not be using the DIL from FORTRAN, the *.FOR
files may be omitted.
If you do not have BLISS-36 Version 3 or Version 4 installed on your
system, copy the file B361LB.REL to SYS:. See section "Special
Considerations (TOPS-10)" below.
If you do not have BLISS-36 Version 3 or Version 4 installed on your
system, copy the file XPORT.REL to SYS:. See the section "Special
Considerations (TOPS-10)" below.
The autopatch library files for the DIL are DIL1V2.REL, DIX1V2.REL,
DIT1V2.REL, DAP1V1.REL, XPN1V1.REL. These should be restored from the
distribution tape to the autopatch library directory you establish for
DIL.
The Installation Verification System is contained in the files
ICSCBL.CTL, ICSF7.CTL, C36T2.CBL, CD36T1.CBL, CT36T1.CBL, F7T2.FOR,
FD7T1.FOR, FT7T1.FOR. These should be restored to some directory if
you intend to run the installation verification system. It is
recommended that you use the directory UTP: ([5,33]). It is
recommended that you run the installation verification system. See
see 6.0, "Installation Verification System," below, for instructions
on running the installation verification.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 14
DECsystem-10 INSTALLATION INSTRUCTIONS
To copy the DIL files from the tape to your system, first set tape
drive MTAx: unavailable to MOUNTR. Mount the distribution tape on
MTAx: and type the following commands:
.ASSIGN MTAx:
.R BACKUP
/TAPE MTAx:
/INTERCHANGE
/SUPERSEDE ALWAYS
/; DOCUMENTATION files
/RESTORE DSKn:[5,14]DIL.BWR = DSKB:[10,7,DIL]DIL.BWR, -
#DSKn:[5,14]DIL.DOC = DSKB:[10,7,DIL]DIL.DOC, -
#DSKn:[5,14]DIL.HLP = DSKB:[10,7,DIL]DIL.HLP, -
#DSKn:[5,14]IDXINI.CBL = DSKB:[10,7,DIL]IDXINI.CBL, -
#DSKn:[5,14]JTSERV.CBL = DSKB:[10,7,DIL]JTSERV.CBL, -
#DSKn:[5,14]JTTERM.CBL = DSKB:[10,7,DIL]JTTERM.CBL, -
#DSKn:[5,14]JTTERM.COB = DSKB:[10,7,DIL]JTTERM.COB, -
#DSKn:[5,14]JTVRPT.CBL = DSKB:[10,7,DIL]JTVRPT.CBL, -
#DSKn:[5,14]PROCES.MAC = DSKB:[10,7,DIL]PROCES.MAC, -
/; sys files
#DSKn:[1,4]DIL.REL = DSKB:[10,7,DIL]DIL.REL, -
#DSKn:[1,4]DIL.LIB = DSKB:[10,7,DIL]DIL.LIB, -
#DSKn:[1,4]DILV7.FOR = DSKB:[10,7,DIL]DILV7.FOR, -
#DSKn:[1,4]DIXV7.FOR = DSKB:[10,7,DIL]DIXV7.FOR, -
#DSKn:[1,4]DITV7.FOR = DSKB:[10,7,DIL]DITV7.FOR, -
#DSKn:[1,4]B361LB.REL = DSKB:[10,7,DIL]B361LB.REL, -
#DSKn:[1,4]XPORT.REL = DSKB:[10,7,DIL]XPORT.REL, -
/; sources -- you choose the SFD you'd like
#DSKn:[??,??]CPYRIT.MAC = DSKB:[10,7,DIL]CPYRIT.MAC, -
#DSKn:[??,??]DILBLD.MIC = DSKB:[10,7,DIL]DILBLD.MIC, -
#DSKn:[??,??]DILC36.INT = DSKB:[10,7,DIL]DILC36.INT, -
#DSKn:[??,??]DILHST.BLI = DSKB:[10,7,DIL]DILHST.BLI, -
#DSKn:[??,??]DILINT.BLI = DSKB:[10,7,DIL]DILINT.BLI, -
#DSKn:[??,??]DILSWI.REQ = DSKB:[10,7,DIL]DILSWI.REQ, -
#DSKn:[??,??]DLCM10.CTL = DSKB:[10,7,DIL]DLCM10.CTL, -
#DSKn:[??,??]DLDS10.MIC = DSKB:[10,7,DIL]DLDS10.MIC, -
#DSKn:[??,??]DLMK10.CTL = DSKB:[10,7,DIL]DLMK10.CTL, -
#DSKn:[??,??]DLVX10.MIC = DSKB:[10,7,DIL]DLVX10.MIC, -
#DSKn:[??,??]INTR10.CTL = DSKB:[10,7,DIL]INTR10.CTL, -
#DSKn:[??,??]POS20.BLI = DSKB:[10,7,DIL]POS20.BLI, -
#DSKn:[??,??]POSGEN.BLI = DSKB:[10,7,DIL]POSGEN.BLI, -
#DSKn:[??,??]DIXCST.BLI = DSKB:[10,7,DIL]DIXCST.BLI, -
#DSKn:[??,??]DIXDEB.BLI = DSKB:[10,7,DIL]DIXDEB.BLI, -
#DSKn:[??,??]DIXDN.BLI = DSKB:[10,7,DIL]DIXDN.BLI, -
#DSKn:[??,??]DIXFBN.BLI = DSKB:[10,7,DIL]DIXFBN.BLI, -
#DSKn:[??,??]DIXFP.BLI = DSKB:[10,7,DIL]DIXFP.BLI, -
#DSKn:[??,??]DIXGBL.BLI = DSKB:[10,7,DIL]DIXGBL.BLI, -
#DSKn:[??,??]DIXGEN.BLI = DSKB:[10,7,DIL]DIXGEN.BLI, -
#DSKn:[??,??]DIXHST.BLI = DSKB:[10,7,DIL]DIXHST.BLI, -
#DSKn:[??,??]DIXLIB.BLI = DSKB:[10,7,DIL]DIXLIB.BLI, -
#DSKn:[??,??]DIXPD.BLI = DSKB:[10,7,DIL]DIXPD.BLI, -
#DSKn:[??,??]DIXREQ.REQ = DSKB:[10,7,DIL]DIXREQ.REQ, -
#DSKn:[??,??]DIXSTR.BLI = DSKB:[10,7,DIL]DIXSTR.BLI, -
DIL.DOC -- V2.1(142) 25-Jul-86 Page 15
DECsystem-10 INSTALLATION INSTRUCTIONS
#DSKn:[??,??]DIXSWI.REQ = DSKB:[10,7,DIL]DIXSWI.REQ, -
#DSKn:[??,??]DIXUTL.BLI = DSKB:[10,7,DIL]DIXUTL.BLI, -
#DSKn:[??,??]DXCM10.CTL = DSKB:[10,7,DIL]DXCM10.CTL, -
#DSKn:[??,??]FIELDS.BLI = DSKB:[10,7,DIL]FIELDS.BLI, -
#DSKn:[??,??]INTERF.BLI = DSKB:[10,7,DIL]INTERF.BLI, -
#DSKn:[??,??]STAR36.BLI = DSKB:[10,7,DIL]STAR36.BLI, -
#DSKn:[??,??]VERSIO.REQ = DSKB:[10,7,DIL]VERSIO.REQ, -
#DSKn:[??,??]DAPPER.B36 = DSKB:[10,7,DIL]DAPPER.B36, -
#DSKn:[??,??]DITC36.INT = DSKB:[10,7,DIL]DITC36.INT, -
#DSKn:[??,??]DITHST.BLI = DSKB:[10,7,DIL]DITHST.BLI, -
#DSKn:[??,??]DTCM10.CTL = DSKB:[10,7,DIL]DTCM10.CTL, -
#DSKn:[??,??]FT10.MAC = DSKB:[10,7,DIL]FT10.MAC, -
#DSKn:[??,??]RMSUSR.R36 = DSKB:[10,7,DIL]RMSUSR.R36, -
#DSKn:[??,??]TTT.MAC = DSKB:[10,7,DIL]TTT.MAC, -
#DSKn:[??,??]BLISSN.REQ = DSKB:[10,7,DIL]BLISSN.REQ, -
#DSKn:[??,??]BLSN10.R36 = DSKB:[10,7,DIL]BLSN10.R36, -
#DSKn:[??,??]BLSNDE.REQ = DSKB:[10,7,DIL]BLSNDE.REQ, -
#DSKn:[??,??]XPN1A.CTL = DSKB:[10,7,DIL]XPN1A.CTL, -
#DSKn:[??,??]XPNCLO.B36 = DSKB:[10,7,DIL]XPNCLO.B36, -
#DSKn:[??,??]XPNDIS.B36 = DSKB:[10,7,DIL]XPNDIS.B36, -
#DSKn:[??,??]XPNERR.B36 = DSKB:[10,7,DIL]XPNERR.B36, -
#DSKn:[??,??]XPNEVE.B36 = DSKB:[10,7,DIL]XPNEVE.B36, -
#DSKn:[??,??]XPNFAI.B36 = DSKB:[10,7,DIL]XPNFAI.B36, -
#DSKn:[??,??]XPNGET.B36 = DSKB:[10,7,DIL]XPNGET.B36, -
#DSKn:[??,??]XPNHST.BLI = DSKB:[10,7,DIL]XPNHST.BLI, -
#DSKn:[??,??]XPNOPN.B36 = DSKB:[10,7,DIL]XPNOPN.B36, -
#DSKn:[??,??]XPNPMR.B36 = DSKB:[10,7,DIL]XPNPMR.B36, -
#DSKn:[??,??]XPNPSI.MAC = DSKB:[10,7,DIL]XPNPSI.MAC, -
#DSKn:[??,??]XPNPUT.B36 = DSKB:[10,7,DIL]XPNPUT.B36, -
#DSKn:[??,??]XPNUTL.B36 = DSKB:[10,7,DIL]XPNUTL.B36, -
#DSKn:[??,??]COPYRI.BLI = DSKB:[10,7,DIL]COPYRI.BLI, -
#DSKn:[??,??]DAP.BLI = DSKB:[10,7,DIL]DAP.BLI, -
#DSKn:[??,??]DAP1A.CTL = DSKB:[10,7,DIL]DAP1A.CTL, -
#DSKn:[??,??]DAPBLK.REQ = DSKB:[10,7,DIL]DAPBLK.REQ, -
#DSKn:[??,??]DAPCOD.REQ = DSKB:[10,7,DIL]DAPCOD.REQ, -
#DSKn:[??,??]DAPERR.BLI = DSKB:[10,7,DIL]DAPERR.BLI, -
#DSKn:[??,??]DAPHST.BLI = DSKB:[10,7,DIL]DAPHST.BLI, -
#DSKn:[??,??]DAPMAC.REQ = DSKB:[10,7,DIL]DAPMAC.REQ, -
#DSKn:[??,??]DAPSUB.BLI = DSKB:[10,7,DIL]DAPSUB.BLI, -
#DSKn:[??,??]DAPT10.B36 = DSKB:[10,7,DIL]DAPT10.B36, -
#DSKn:[??,??]DIR10.B36 = DSKB:[10,7,DIL]DIR10.B36, -
#DSKn:[??,??]DIRECT.BLI = DSKB:[10,7,DIL]DIRECT.BLI, -
#DSKn:[??,??]DIRLST.BLI = DSKB:[10,7,DIL]DIRLST.BLI, -
#DSKn:[??,??]GETPUT.BLI = DSKB:[10,7,DIL]GETPUT.BLI, -
#DSKn:[??,??]M11FIL.B36 = DSKB:[10,7,DIL]M11FIL.B36, -
#DSKn:[??,??]NXTF20.B36 = DSKB:[10,7,DIL]NXTF20.B36, -
#DSKn:[??,??]NXTFIL.BLI = DSKB:[10,7,DIL]NXTFIL.BLI, -
#DSKn:[??,??]OPEN.BLI = DSKB:[10,7,DIL]OPEN.BLI, -
#DSKn:[??,??]RDWRIT.B36 = DSKB:[10,7,DIL]RDWRIT.B36, -
#DSKn:[??,??]SETAI.BLI = DSKB:[10,7,DIL]SETAI.BLI, -
#DSKn:[??,??]STRING.B36 = DSKB:[10,7,DIL]STRING.B36, -
#DSKn:[??,??]TRACE.BLI = DSKB:[10,7,DIL]TRACE.BLI, -
#DSKn:[??,??]CONDIT.REQ = DSKB:[10,7,DIL]CONDIT.REQ, -
DIL.DOC -- V2.1(142) 25-Jul-86 Page 16
DECsystem-10 INSTALLATION INSTRUCTIONS
#DSKn:[??,??]EXT1A.CTL = DSKB:[10,7,DIL]EXT1A.CTL, -
#DSKn:[??,??]EXTHST.BLI = DSKB:[10,7,DIL]EXTHST.BLI, -
#DSKn:[??,??]RMS.R36 = DSKB:[10,7,DIL]RMS.R36, -
#DSKn:[??,??]RMSBLK.R36 = DSKB:[10,7,DIL]RMSBLK.R36, -
#DSKn:[??,??]RMSERR.B36 = DSKB:[10,7,DIL]RMSERR.B36, -
#DSKn:[??,??]RMSLIB.R36 = DSKB:[10,7,DIL]RMSLIB.R36, -
#DSKn:[??,??]UUODEF.R36 = DSKB:[10,7,DIL]UUODEF.R36, -
#DSKn:[??,??]DIL.CTL = DSKB:[10,7,DIL]DIL.CTL, -
#DSKn:[??,??]DILDEF.CCL = DSKB:[10,7,DIL]DILDEF.CCL, -
/; Autopatch area, -
#DSKn:[7,6,CSP]DIL1V2.REL = DSKB:[10,7,DIL]DIL1V2.REL, -
#DSKn:[7,6,CSP]DIT1V2.REL = DSKB:[10,7,DIL]DIT1V2.REL, -
#DSKn:[7,6,CSP]DIX1V2.REL = DSKB:[10,7,DIL]DIX1V2.REL, -
#DSKn:[7,6,CSP]DAP1V1.REL = DSKB:[10,7,DIL]DAP1V1.REL, -
#DSKn:[7,6,CSP]XPN1V1.REL = DSKB:[10,7,DIL]XPN1V1.REL, -
/; Installation verification stuff
#DSKn:[5,33]C36T2.CBL = DSKB:[10,7,DIL]C36T2.CBL, -
#DSKn:[5,33]CD36T1.CBL = DSKB:[10,7,DIL]CD36T1.CBL, -
#DSKn:[5,33]CT36T1.CBL = DSKB:[10,7,DIL]CT36T1.CBL, -
#DSKn:[5,33]F7T2.FOR = DSKB:[10,7,DIL]F7T2.FOR, -
#DSKn:[5,33]FD7T1.FOR = DSKB:[10,7,DIL]FD7T1.FOR, -
#DSKn:[5,33]FT7T1.FOR = DSKB:[10,7,DIL]FT7T1.FOR, -
#DSKn:[5,33]ICSCBL.CTL = DSKB:[10,7,DIL]ICSCBL.CTL, -
#DSKn:[5,33]ICSF7.CTL = DSKB:[10,7,DIL]ICSF7.CTL
/REWIND
/EXIT
.UNLOAD MTAx:
8.3 Special Considerations
The B361LB.REL (BLISS run-time library) and the XPORT.REL
(transportable support library) shipped with the DIL are the current
field-image versions; if you have BLISS-36 Version 3 or Version 4
installed, there is no need to install either of these two files.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 17
VAX/VMS INSTALLATION INSTRUCTIONS
9.0 VAX/VMS INSTALLATION INSTRUCTIONS
IMPORTANT
You must have VMS V3.1 or later to
install this kit.
9.1 CONVENTIONS
The following conventions are used in this document, and in the
VMSINSTAL procedure:
[]
Square brackets enclose default answers to
questions VMSINSTAL asks you throughout the
installation procedure. To give the default
answer to a question, simply press the RETURN
key.
9.2 VAX DIL INSTALLATION PROCEDURE
Read this entire section carefully before you attempt to install VAX
DIL. The installation procedure should take less than 45 minutes.
9.2.1 Components Of The VAX DIL Facility -
An installed VAX DIL facility consists of:
o The library of Data Interchange routines, DIL.OLB.
o The sharable image format of the library, DIL.EXE, and the
LINKER options file to link with the sharable image, DIL.OPT.
o The text library for the Interface Support files, DIL.TLB.
o The message files, DITMSG.EXE and DIXMSG.EXE.
o The file DILTFR.OBJ which defines VMS transfer vectors for
DIL entry points.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 18
VAX/VMS INSTALLATION INSTRUCTIONS
o XPORT.OLB, which is necessary for DIL and is installed only
if it does not already exist on your system.
o The DIL Beware file, DIL.BWR.
o The DIL sources for VAX/VMS. These sources are provided for
reference only and are not warranted or supported by Digital
Equipment Corporation.
9.2.2 The Installation Procedure -
The VAX DIL kit installs the shared image, the executable images, and
their associated files. The kit also installs XPORT.OLB if it is not
present on your system.
This installation procedure:
o Verifies that VMS V3.1 or later is running and that there are
at least 3000 free blocks for the installation to use.
o Copies the installation kit from the kit medium to the
installation medium.
o Installs the VAX DIL images, message files and XPORT if
necessary.
o Installs the beware file and installs the help file into the
system help library.
o Checks to see if FORTRAN is installed and, if so, compiles
and runs the FORTRAN IVP tests. You will need SYSNAM
privilege to successfully run the FORTRAN IVP tests.
o Checks to see if COBOL is installed and, if so, compiles and
runs the COBOL IVP tests. You will need SYSNAM privilege to
successfully run the COBOL IVP tests.
o Optionally purges prior versions of the VAX DIL facility from
your system.
o Deletes the files comprising this kit from the installation
medium.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 19
VAX/VMS INSTALLATION INSTRUCTIONS
9.2.3 Installing VAX DIL -
The VAX/VMS DIL product kit is a standard BACKUP save set, called
DIL021.A. You should use the standard VMSINSTAL.COM procedure to
install the VAX Data Interchange library kit.
The VAX DIL installation consists of three phases. During phase 1,
VMSINSTAL copies the DIL V2.1 kit from the kit media to the
installation device. During phase 2, VMSINSTAL asks you questions
about the installation and installs the DIL images and files. During
phase 3, VMSINSTAL runs the Installation Verification Procedure.
You will need to be logged into an account which has SYSNAM privilege
in order to successfully run the Installation Verification Procedure.
If an Installation Verification program fails with error code
15302676, make sure you have SYSNAM privilege.
To install the VAX DIL you should:
1. Log into a system account (and be sure you have SYSNAM
privilege).
2. Execute the VMSINSTAL.COM procedure.
3. Mount the VAX DIL kit media.
4. Respond to the questions asked by the installation procedure
and VMSINSTAL.
9.2.4 Running The VMSINSTAL.COM Procedure -
After you have logged into a system account and have assured that you
have SYSNAM privilege, use this DCL command to run the VMSINSTAL
procedure:
@SYS_$UPDATE:VMSINSTAL DIL021 dilu:
where dilu: is the physical name of the device on which you mount the
kit media. VMSINSTAL prompts you for this parameter if you do not
include it.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 20
VAX/VMS INSTALLATION INSTRUCTIONS
9.2.5 Phase 1: Copying The Kit To The Installation Device -
During Phase 1, VMSINSTAL:
o Asks you if you need to backup the system disk.
o Asks you the name of the device on which the kit media will
be mounted (only if you did not specify dilu: as described
in 9.2.4
o Asks you the names of the products you wish to install (only
if you did not specify DIL021 as described in 9.2.4.
o Copies the kit from the kit media to the installation device.
9.2.5.1 Backing Up The System Disk -
VMSINSTAL first asks you the following question:
* Are you satisfied with the backup of your system disk [YES]?
If you have not backed up your system disk, you should not continue
with the installation until you do so. If you need to back up the
system disk, type "N." VMSINSTAL exits and returns you to the DCL
prompt. Back up your system disk, and then start VMSINSTAL again.
If you have already backed up the system disk, type "Y" and press the
RETURN key or simply press the RETURN key.
See the appropriate VMS software installation guide in the VMS
documentation set for more information on backups before
installations. For general information on backups, see the VAX/VMS
Utilities Reference Manual.
9.2.5.2 Specifying The Device Name -
If you did not specify a physical device name on the DCL command line,
VMSINSTAL asks you for the name of the device on which the
distribution media will be mounted.
* Where will the distribution volumes be mounted:
Type in the physical device name of the appropriate drive and press
RETURN. You must enter the physical device name according to the
format:
dilu:
DIL.DOC -- V2.1(142) 25-Jul-86 Page 21
VAX/VMS INSTALLATION INSTRUCTIONS
9.2.5.3 Specifying The Product Name -
If you did not specify them on the command line, VMSINSTAL will ask
you for the names of the products you wish to install from the first
volume of the distribution media:
* Products [EXIT]:
In response to this prompt, type:
DIL021
9.2.5.4 Copying The Kit Onto The Installation Device -
VMSINSTAL then instructs you to mount the first volume of the
distribution volume set on the proper device. VMSINSTAL then asks:
* Are you ready?
After you have mounted the volume on the proper device, answer "Y."
VMSINSTAL then prints the following messages:
The following products will be installed:
DIL V2.1
Beginning installation of DIL V2.1 at hh:mm
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
After VMSINSTAL has restored the entire kit, Phase 1 is complete and
Phase 2 begins.
9.2.6 Phase 2: The Installation -
Before VMSINSTAL installs the DIL images, message files, help file,
source, etc., it asks you if you would like to purge the files
replaced by this installation. After you have answered this question,
VMSINSTAL will perform the installation for you.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 22
VAX/VMS INSTALLATION INSTRUCTIONS
9.2.6.1 Deciding Whether To PURGE Files -
VMSINSTAL will ask you the following question:
* Do you want to purge files replaced by this installation [YES]?
If you would like VMSINSTAL to purge the files replaced by this
installation, type "Y" and press the RETURN key or simply press the
return key. If you do not want VMSINSTAL to purge the files replaced
by this installation, type "N" and press the RETURN key.
9.2.6.2 Sources -
After you have answered the question about purging files, the
following message will appear:
This kit contains a complete set of DIL sources for VMS. They will
be installed on the system device in directory [DIL]. If this
directory does not presently exist, this installation procedure
will create it.
The DIL VAX sources will all be installed in the system device
directory [DIL]. If that directory does not exist, it will be created
for you. You do not need to worry about creating the directory
yourself. When the directory is created, you will see the following
message:
%VMSINSTAL-I-SYSDIR, This product creates system directory [DIL].
If the system device directory [DIL] already exists, you will see the
following message:
%CREATE-I-EXISTS, VMI$ROOT:[DIL] alreay exists
NOTE
The sources are provided for the VAX/VMS
DIL product. These sources are provided
for reference only and are not warranted
or supported by Digital Equipment
Corporation.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 23
VAX/VMS INSTALLATION INSTRUCTIONS
9.2.6.3 The Installation -
After the system device directory [DIL] is created (if necessary),
VMSINSTAL will perform the installation for you. You will see the
following message from the installation procedure:
This package includes a copy of the DIL Beware file (called DIL.BWR)
which will be placed in SYS_$UPDATE.
Next, VMSINSTAL will print the following message:
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
At this point the installation is completed and the IVP can be run.
9.2.7 Phase 3: The Installation Verification Procedure -
NOTE
In order for the Installation
Verification procedure to be useful, you
should have either COBOL or FORTRAN
installed on your system.
Once the installation has completed, VMSINSTAL will run the IVP for
you. First, you will see the following message:
WARNING: You need SYSNAM privilege to run the Installation
Verification Procedure. If you do not have SYSNAM
privilege, certain programs will fail with the
error code 15302676.
If you are logged into an account which does not have SYSNAM privilege
then you will not be able to successfully run some of the IVP
programs. You should not run the installation unless you are logged
into an account which has SYSNAM privilege.
Next you will see the following message:
Please wait while the installation verification is run...
which signifies that the IVP procedure has started.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 24
VAX/VMS INSTALLATION INSTRUCTIONS
Since the Data Interchange Library is callable from COBOL and FORTRAN,
the IVP consists of a set of COBOL test programs and a set of FORTRAN
test programs.
9.2.7.1 The COBOL IVP Tests -
The IVP first checks to see if COBOL is installed on your system. You
will see the following message:
First, let's see if you have COBOL installed on your system.
The IVP will simply do a directory of SYS$SYSROOT:[SYSEXE]COBOL.EXE.
If the file is there, then you will see the following message:
Since COBOL is installed on your system, the COBOL IVP tests
will be run.
and then the COBOL IVP is run. The COBOL test programs are compiled,
linked and then executed.
If the COBOL tests are run, you will see the following output from the
programs:
Doing conversions...
Tests through 15 completed successfully.
Tests through 22 completed successfully.
Tests through 24 completed successfully.
C36T2 successfully completed.
NFOPP Status return: 000000001
NFOPA Status return: 000000001
NFGND status return: 015303467
NFACC Status return: 000000001
Enter some data to be sent over the link:
NFSND Status return: 000000001
NFRCV Status return: 000000001
Data received:
This is data for CT32T1 for the first send
Enter some data to be sent back over the link:
NFSND Status return: 000000001
NFRCV Status return: 000000001
Data received:
This is data for CT32T1 for the second send
NFCLS Status return: 000000001
NFGND Status return: 015303499
CT32T1 test successful
Enter the value for the record format (RFM):
0 = undefined,
1 = fixed,
2 = variable,
DIL.DOC -- V2.1(142) 25-Jul-86 Page 25
VAX/VMS INSTALLATION INSTRUCTIONS
3 = VFC,
4 = stream
Enter a value for the record attributes (RAT):
0 = unspecified,
1 = implied <LF><CR> envelope,
2 = print file format,
3 = Fortran carriage control,
4 = MACY11 format
ROPEN Status return: 000000001
Enter data for the record for the remote file:
RWRITE Status return: 000000001
RCLOSE Status return: 000000001
ROPEN Status return: 000000001
RREAD returned 000000001
The record was:
This is dat for CD32T1 for writing to the remote file DAP.TST.
RCLOSE Status return: 000000001
CD32T1 test successful.
The IVP will then print the message:
COBOL Tests completed.
If you do not have COBOL installed you will see the following message:
Since COBOL is not installed on this system, the COBOL IVP tests
cannot be run.
and the procedure will go on to the FORTRAN tests.
9.2.7.2 The FORTRAN IVP Tests -
The IVP first checks to see if FORTRAN is installed on your system.
You will see the following message:
Now, let's see if you have FORTRAN installed on your system.
The IVP will simply do a directory of SYS$SYSROOT:[SYSEXE]FORTRAN.EXE.
If the file is there, then you will see the following message:
Since FORTRAN is installed on your system, the FORTRAN IVP tests
will be run.
and then the FORTRAN IVP is run. The FORTRAN test programs are
compiled, linked and then executed.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 26
VAX/VMS INSTALLATION INSTRUCTIONS
If the FORTRAN tests are run, you will see the following output from
the programs:
Doing conversions
Tests through 15 completed successfully
Tests through 22 successfully completed
Tests through 24 successfully completed
F32T2 successfully completed
NFOPP Status return: 1
NFOPA Status return: 1
NFGND Status return: 15303467
NFACC Status return: 1
Enter some data to be sent over the link:
NFSND Status return: 1
NFRCV Status return: 1
Data received:
This is data for FT32T1 for the first send
Enter some data to be sent over the link:
NFSND Status return: 1
NFRCV Status return: 1
Data received:
This is data for FT32T1 for the second send
NFCLS Status return: 1
FT32T1 test successful.
FORTRAN STOP
ROPEN status return: 1
Enter data for the record:
RWRITE status return: 1
RCLOSE status return: 1
ROPEN status return: 1
RREAD status return: 1
The record read was:
This is data for FD32T1 for writing to the remote file DAP.TST.
RCLOSE status return: 1
** FD32T1 test successful **
FORTRAN STOP
The IVP will then print the message:
FORTRAN Tests completed.
If you do not have FORTRAN installed you will see the following
message:
Since FORTRAN is not installed on this system the FORTRAN IVP tests
cannot be run.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 27
VAX/VMS INSTALLATION INSTRUCTIONS
9.2.7.3 End Of The IVP -
After the FORTRAN portion of the IVP has run, you will see the
following message:
IVP FOR DIL V2.1 COMPLETED.
9.2.7.4 End Of The Installation -
After the IVP has run, the installation is completed and you will see
the message:
Installation of DIL V2.1 completed at hh:mm
VMSINSTAL procedure done at hh:mm
9.3 LOG OF A SAMPLE INSTALLATION OF DIL
$ @vmsinstal.com dil021 disk$dracula:[sclemens]
VAX/VMS Software Product Installation Procedure V4.0
It is 5-OCT-1984 at 11:30.
Enter a question mark (?) at any time for help.
%VMSINSTAL-W-NOTSYSTEM, You are not logged in to the SYSTEM account.
%VMSINSTAL-W-NOSETPRV, You are not running on an account with SETPRV privilege.
%VMSINSTAL-W-LOWQUOTA, One or more account quotas may be too low.
%VMSINSTAL-W-DECNET, Your DECnet network is up and running.
%VMSINSTAL-W-ACTIVE, The following processes are still active:
SMITH
BROWN
MARTIN
* Do you want to continue anyway [NO]? Y
* Are you satisfied with the backup of your system disk [YES]?
The following products will be processed:
DIL V2.1
Beginning installation of DIL V2.1 at 11:30
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
DATA INTERCHANGE LIBRARY (DIL)
Installation
DIL.DOC -- V2.1(142) 25-Jul-86 Page 28
VAX/VMS INSTALLATION INSTRUCTIONS
Version 2.1
* Do you want to purge files replaced by this installation [YES]? Y
This kit contains a complete set of DIL sources for VMS. They will
be installed on the system device in directory [DIL]. If this
directory does not presently exist, this installation procedure
will create it.
%VMSINSTAL-I-SYSDIR, This product creates system directory [DIL].
This package includes a copy of the DIL Beware file (called DIL.BWR)
which will be placed in SYS$UPDATE.
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
WARNING: You need SYSNAM privilege to run the Installation
Verification Proceedure. If you do not have SYSNAM
privilege, certain programs will fail with the
error code 15302676.
Please wait while the installation verification is run...
First, let's see if you have COBOL installed on your system.
Directory SYS$SYSROOT:[SYSEXE]
COBOL.EXE;1
Total of 1 file.
Since COBOL is installed on your system, the COBOL IVP tests
will be run.
Doing conversions...
Tests through 15 completed successfully.
Tests through 22 completed successfully.
Tests through 24 completed successfully.
C36T2 successfully completed.
NFOPP Status return: 000000001
NFOPA Status return: 000000001
NFGND status return: 015303467
NFACC Status return: 000000001
Enter some data to be sent over the link:
NFSND Status return: 000000001
NFRCV Status return: 000000001
DIL.DOC -- V2.1(142) 25-Jul-86 Page 29
VAX/VMS INSTALLATION INSTRUCTIONS
Data received:
This is data for CT32T1 for the first send
Enter some data to be sent back over the link:
NFSND Status return: 000000001
NFRCV Status return: 000000001
Data received:
This is data for CT32T1 for the second send
NFCLS Status return: 000000001
NFGND Status return: 015303499
CT32T1 test successful
Enter the value for the record format (RFM):
0 = undefined,
1 = fixed,
2 = variable,
3 = VFC,
4 = stream
Enter a value for the record attributes (RAT):
0 = unspecified,
1 = implied <LF><CR> envelope,
2 = print file format,
3 = Fortran carriage control,
4 = MACY11 format
ROPEN Status return: 000000001
Enter data for the record for the remote file:
RWRITE Status return: 000000001
RCLOSE Status return: 000000001
ROPEN Status return: 000000001
RREAD returned 000000001
The record was:
This is dat for CD32T1 for writing to the remote file DAP.TST.
RCLOSE Status return: 000000001
CD32T1 test successful.
COBOL Tests completed.
Now, let's see if you have FORTRAN installed on your system.
Directory SYS$SYSROOT:[SYSEXE]
FORTRAN.EXE;2
Total of 1 file.
Since FORTRAN is installed on your system, the FORTRAN IVP tests
will be run.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 30
VAX/VMS INSTALLATION INSTRUCTIONS
Doing conversions
Tests through 15 completed successfully
Tests through 22 successfully completed
Tests through 24 successfully completed
F32T2 successfully completed
NFOPP Status return: 1
NFOPA Status return: 1
NFGND Status return: 15303467
NFACC Status return: 1
Enter some data to be sent over the link:
NFSND Status return: 1
NFRCV Status return: 1
Data received:
This is data for FT32T1 for the first send
Enter some data to be sent over the link:
NFSND Status return: 1
NFRCV Status return: 1
Data received:
This is data for FT32T1 for the second send
NFCLS Status return: 1
FT32T1 test successful.
FORTRAN STOP
ROPEN status return: 1
Enter data for the record:
RWRITE status return: 1
RCLOSE status return: 1
ROPEN status return: 1
RREAD status return: 1
The record read was:
This is data for FD32T1 for writing to the remote file DAP.TST.
RCLOSE status return: 1
** FD32T1 test successful **
FORTRAN STOP
FORTRAN Tests completed.
IVP FOR DIL V2.1 COMPLETED.
Installation of DIL V2.1 completed at 11:40
VMSINSTAL procedure done at 11:41
$
DIL.DOC -- V2.1(142) 25-Jul-86 Page 31
VAX/VMS INSTALLATION INSTRUCTIONS
9.4 FILES CREATED OR MODIFIED BY THE DIL INSTALLATION PROCEDURE
Successful installation of the VAX Data Interchange Library creates
the following files on your system:
SYS$LIBRARY:DIL.EXE
SYS$LIBRARY:DIL.OLB
SYS$LIBRARY:DIL.OPT
SYS$LIBRARY:DIL.TLB
SYS$LIBRARY:DILTFR.OBJ
SYS$MESSAGE:DITMSG.EXE
SYS$MESSAGE:DIXMSG.EXE
SYS$LIBRARY:XPORT.OLB
[installed only if XPORT is not presently installed your
system]
SYS$UPDATE:DILV2.MAN
SYS$UPDATE.DIL.BWR
The following files will be installed in the system device directory
[DIL]:
AAA.BLI
BUILD.COM
COMDIL.COM
COMDIT.COM
COMDIX.COM
DAPPER.B32
DILC32.INT
DILC3220.INT
DILDEF.COM
DILF32.FOR
DILF32A.FOR
DILEXE.COM
DILHST.BLI
DILINT.BLI
DILOLB.COM
DILSWI.REQ
DILTFR.MAR
DIT32ANSI.INT
DITC20.INT
DITC32.INT
DITF32.INT
DITHST.BLI
DITMSG.MSG
DIXC32.INT
DIXC3220.INT
DIXCST.BLI
DIXDEB.BLI
DIL.DOC -- V2.1(142) 25-Jul-86 Page 32
VAX/VMS INSTALLATION INSTRUCTIONS
DIXDEB.REQ
DIXDN.BLI
DIXF32.INT
DIXF32A.INT
DIXFBN.BLI
DIXFP.BLI
DIXGBL.BLI
DIXGEN.BLI
DIXHST.BLI
DIXLIB.BLI
DIXPD.BLI
DIXREQ.REQ
DIXSTR.BLI
DIXSWI.REQ
DIXUTL.BLI
FIELDS.BLI
INTERFILS.BLI
INTERFILS.COM
MAKDIXMSG.BLI
POS20.BLI
POSGEN.BLI
RMSSTUFF.R32
TTT.B32
VERSION.REQ
The installation procedure modifies the following files:
SYS$HELP:HELPLIB.HLB
DIL.DOC -- V2.1(142) 25-Jul-86 Page 33
INSTALLATION VERIFICATION SYSTEM
10.0 INSTALLATION VERIFICATION SYSTEM
The Installation Verification System is a set of batch control files.
Each of these batch control files contains commands to compile, link
and run the programs which have been provided with the DIL to perform
Installation Verification. There are batch control files for TOPS-10,
TOPS-20 and VAX/VMS systems. For each of the supported languages on
each of these systems there is one installation verification batch
control file. On VAX/VMS systems, the installation verification is
run for you, automatically, by the VMSINSTAL command procedure.
A list of the the batch control files for each language and system
combination follows:
TOPS-20 files: Language:
ICSCBL.CTL COBOL
ICSF7.CTL FORTRAN
TOPS-10 files: Language:
ICSCBL.CTL COBOL
ICSF7.CTL FORTRAN
VAX/VMS files: Language:
ICSCOB.COM COBOL
ICSFOR.COM FORTRAN
The programs which are supplied for installation verification run
minimal tests on each set of the DIL routines provided for each of the
supported language/system combination. The sets of routines tested
are: (1) Data Conversion (2) Remote File Access and (3) Task-to-Task
routines.
A list of the programs for each system and the set of routines they
test (and the control file which runs them) is below:
Program name: Routines tested: System: Control file:
C36T2.CBL Data conversion TOPS-20 ICSCBL.CTL
TOPS-10 ICSCBL.CTL
CD36T1.CBL Remote file access TOPS-20 ICSCBL.CTL
TOPS-10 ICSCBL.CTL
CT36T1.CBL Task-to-task TOPS-20 ICSCBL.CTL
TOPS-10 ICSCBL.CTL
C32T2.COB Data conversion VAX/VMS ICSCOB.COM
CD32T1.COB Remote file access VAX/VMS ICSCOB.COM
CT32T1.COB Task-to-task VAX/VMS ICSCOB.COM
F7T2.FOR Data conversion TOPS-20 ICSF7.CTL
TOPS-10 ICSF7.CTL
FD7T1.FOR Remote file access TOPS-20 ICSF7.CTL
TOPS-10 ICSF7.CTL
DIL.DOC -- V2.1(142) 25-Jul-86 Page 34
INSTALLATION VERIFICATION SYSTEM
FT7T1.FOR Task-to-task TOPS-20 ICSF7.CTL
TOPS-10 ICSF7.CTL
F32T2.FOR Data conversion VAX/VMS ICSFOR.COM
FD32T1.FOR Remote file access VAX/VMS ICSFOR.COM
FT32T1.FOR Task-to-task VAX/VMS ICSFOR.COM
All of the test programs use the DIL Interface Support files.
The task-to-task and remote file access installation verification
programs use only the local network node.
The DIL must be installed in accordance with the instructions provided
with the DIL. If it is not, the Installation Verification system is
irrelevant.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 35
INSTALLATION VERIFICATION SYSTEM
10.1 TOPS-20 Installation Verification
On TOPS-20, the Installation Verification System consists of two batch
control files; one for COBOL and one for FORTRAN. To run the test
system, you simply run the batch control files using the SUBMIT
command, wait for the batch job to finish, and then examine the
resulting batch log file. Before you run any of the TOPS-20 batch
streams you should read this section and the section above to ensure
that the test streams run properly.
For all of the TOPS-20 Installation Verification System batch streams,
you will need a VALID login directory called PS:<DIL-TEST> with the
password DIL-TEST. If this directory is not set up properly, some of
the test programs will fail. If your system is set up with account
validation enabled, then you must ensure that the directory
PS:<DIL-TEST> has a valid account default for login set, and
PS:<SYSTEM>ACCOUNTS-TABLE.BIN reflects that this account is indeed
valid specifically for the directory PS:<DIL-TEST>. (You may specify
any valid account default for login that you wish.) For more
information on account validation, see the TOPS-20 System Managers
Guide.
The directory PS:<DIL-TEST> does not require any privileges.
Permanent and working disk quotas of 500 or more blocks are required.
If you do not want to use the directory PS:<DIL-TEST> you will have to
edit the files listed below to change the directory name and password
to one of your choice:
CD36T1.CBL
FD7T1.FOR
ICSCBL.CTL
ICSF7.CTL
The programs that test DIT routines will exercise the FALs. If there
is not a FAL free for the program to use, it will die with the error
DIT-NETOPRFAIL (return code values 61210656 through 61210660).
To run the Installation Verification type the following commands:
@SUBMIT ICSCBL.CTL
@SUBMIT ICSF7.CTL
DIL.DOC -- V2.1(142) 25-Jul-86 Page 36
INSTALLATION VERIFICATION SYSTEM
Here is an example of running one of the Installation Verification
Test streams for TOPS-20. The same procedure is used for all of the
Installation Verification tests on TOPS-20.
@; Begin sample run of TOPS-20 COBOL Installation Verification.
@
@; Make sure the Installation Verification programs for this test
@; stream are all in the directory that will be connected to when
@; the batch stream runs.
@
@dir icscbl.ctl, c36t2.cbl, cd36t1.cbl, ct36t1.cbl
PS:<DIL-TEST>
ICSCBL.CTL.3
C36T2.CBL.1
CD36T1.CBL.1
CT36T1.CBL.1
Total of 4 files
@
@
@; All the files needed are here. Submit the control file
@; and run the test.
@
@submit icscbl.ctl/output:nolog
[Batch job ICSCBL queued, request #1261, limit 0:05:00]
@
@; Wait for the batch job to finish.
@
@information batch/user:DIL-TEST
[The queues are empty]
@
@; The batch job is done. Print the log file and examine it to make
@; sure there are no errors.
@
@print ICSCBL.LOG
@
@; If a test program finishes without error, it will give a message
@; saying that it has completed successfully. If there is an error
@; when you run the programs, there will be a message such as "Invalid
@; status returned from NFOPP." If you get an error, make sure that
@; you have set up the proper directory for these tests. Verify that
@; your network is up and that there are enough FALs running. If you
@; get an error at link or compile time, make sure that the DIL is
@; installed as directed.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 37
INSTALLATION VERIFICATION SYSTEM
10.2 TOPS-10 Installation Verification
On TOPS-10, the Installation Verification System consists of two batch
control files; one for COBOL and one for FORTRAN. To run the test
system, you simply run the batch control files using the SUBMIT
command, wait for the batch job to finish, and then examine the
resulting batch log file. Before you run any of the TOPS-10 batch
streams you should read this section to ensure that the test streams
run properly.
For all of the TOPS-10 Installation Verification System batch streams,
you will need a VALID PPN called [5,33] with the password DILTST. If
this directory is not set up properly, some of the test programs will
fail.
The PPN [5,33] does not require any privileges. Disk quotas of 1100
blocks or more are required.
If you do not want to use the PPN [5,33] you will have to edit the
files listed below to change the directory name and password to one of
your choice:
CD36T1.CBL
FD7T1.FOR
ICSCBL.CTL
ICSF7.CTL
The programs that test DIT routines will exercise the FALs. If there
is not a FAL free for the program to use, it will die with the error
DIT-NETOPRFAIL (return code values 61210656 through 61210660).
To run the Installation Verification type the following commands:
.SUBMIT ICSCBL.CTL
.SUBMIT ICSF7.CTL
DIL.DOC -- V2.1(142) 25-Jul-86 Page 38
INSTALLATION VERIFICATION SYSTEM
Below is a sample run of one of the Installation Verification Test
streams for TOPS-10. The same procedure is used for ALL of the
Installation Verification tests on TOPS-10.
.; Begin sample run of TOPS-10 COBOL Installation Verification.
.
.; Make sure that the Installation Verification test program and batch
.; control file are in this directory.
.
.dir icscbl.ctl, c36t2.cbl, cd36t1.cbl, ct36t1.cbl
ICSCBL CTL 6 <007> 12-Apr-84 DSKB: [5,33]
C36T2 CBL 19 <007> 11-Apr-84
CD36T1 CBL 13 <007> 12-Apr-84
CT36T1 CBL 14 <007> 9-Apr-84
Total of 52 blocks in 4 files
.
.
.; Submit the TOPS-10 COBOL Installation Verification batch stream.
.
.submit icscbl.ctl/notify:y/output:nolog
[Batch job ICSCBL queued, request #372, limit 1:00:00]
.
[From SYSTEM: Job ICSCBL request #372 finished executing at 15:19:20]
.
.; The batch job is finished. You should examine the log file to
.; make sure that no errors have occured.
.
.; If a test program finishes without error, it will give a message
.; saying that it has completed successfully. If there is an error
.; when you run the programs, there will be a message such as "Invalid
.; status returned from NFOPP." If you get an error, make sure that
.; you have set up the proper directory for these tests. Verify that
.; your network is up and that there are enough FALs running. If you
.; get an error at link or compile time, make sure that the DIL is
.; installed as directed.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 39
INSTALLATION VERIFICATION SYSTEM
10.3 VAX/VMS Installation Verification
On VAX/VMS systems, the installation verification procedure is run
automatically by the VMSINSTAL command procedure. The installation
verification procedure checks to see if COBOL is installed on your
system, and if it is, runs the COBOL tests. Then a check is made to
see if FORTRAN is installed on your system, and if it is, the FORTRAN
tests are run. If either language is NOT installed, the tests for
that language are skipped over.
You will need SYSNAM privilege to run the Installation Verification
Procedure. If you do not have the SYSNAM privilege, certain of the
Installation Verification tests will fail with error code 15302676.
See section 8.2.7 for more information about the VAX/VMS DIL
Installation Verification procedure.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 40
PRODUCT CHANGES
11.0 PRODUCT CHANGES
DIL Version 2.1 is a maintenance release. There were no new features
added.
12.0 SUGGESTIONS
None.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 41
DATA INTERCHANGE LIBRARY SAMPLE APPLICATION
13.0 DATA INTERCHANGE LIBRARY SAMPLE APPLICATION
13.1 Description
The Data Interchange Library Sample Application is a distributed COBOL
application which uses the Task-to-task, Remote File Access and Data
Conversion routines of the DIL.
The application is a "Labor Ticket" collection system. It enables
each employee to enter weekly time card information from a terminal,
either on a VAX, a DECSYSTEM-20, or a DECsystem-10. The labor
information collected from remote and local terminals is stored in a
file on the DECSYSTEM-20, or DECsystem-10, depending on where the
server is running. A summary report, in the form of a sequential file
stored on the VAX, is written from a separate report program on the
DECSYSTEM-20, or DECsystem-10. Before running the sample application,
the program IDXINI.CBL should be run on the DECSYSTEM-20 or the
DECsystem-10 where the server is going to be running. This program
initializes the indexed sequential data file used by the application.
The server program (JTSERV.CBL) can serve multiple users and therefore
has the capability to open four or six network links. (On a
DECSYSTEM-20, a process which is running without enabled WHEEL
privileges can only open four links. If the process is an enabled
WHEEL, then six links will be opened. PROCES.MAC checks the process
running the server program to see if it is an enables WHEEL and can
therefore open six rather than four links. PROCES is called from the
server. On a DECsystem-10, PROCES.MAC checks to see if the job is
running under [1,2].) The server program opens passive links and waits
for connect events from remote tasks. The terminal interface programs
(JTTERM.CBL which will run on either a DECSYSTEM-20 or a DECsystem-10
and JTTERM.COB which will run on a VAX/VMS system) are run from
terminals whenever a user wants to enter in labor ticket information.
When a user starts up the terminal interface program on his system,
that program attempts to connect to the remote server program. The
server then accepts the link. The user at the terminal interface
program can then request to update labor ticket information or to exit
the program. If an update is requested, the employee's badge (or
identification) number is collected and sent to the server. The
server will then query the data file to see if the badge number
presently exists. The server will send a message to the terminal
interface program with the result of the query. The user can then
continue or abort the update. If the update is continued, the
remainder of the labor ticket information is collected and sent to the
server to be stored. Otherwise, the server is sent a message to abort
this particular update. Once the update is finished (or aborted), the
user can then update again or exit.
The report program (JTVRPT.CBL) runs on the DECSYSTEM-20, or
DECsystem-10 and writes a remote file onto a VAX. It is not a part of
the Task-to-task process described above. It can be run at will,
either in batch or from a user terminal.
DIL.DOC -- V2.1(142) 25-Jul-86 Page 42
DATA INTERCHANGE LIBRARY SAMPLE APPLICATION
13.2 Running The Sample Application
To run the DIL Sample Application on your systems, you must first edit
the programs to reflect the node names and directory names which you
choose to use. Once you have finished editing, you should compile and
link the DECSYSTEM-20 programs as follows:
@COBOL
COBOL>IDXINI.CBL
COBOL>JTSERV.CBL/STACK:2000
COBOL>JTTERM.CBL/STACK:2000
COBOL>JTVRPT.CBL/STACK:2000
COBOL>EXIT
@MACRO
*PROCES=PROCES
@
@LINK
*IDXINI/GO
@SAVE
@
@LINK
*JTSERV,PROCES,SYS:DIL/SE,SYS:XPORT/SE/EXCLUDE:XFUNCT/G
@SAVE
@
@LINK
*JTTERM,SYS:DIL/SE,SYS:XPORT/SE/EXCLUDE:XFUNCT/G
@SAVE
@
@LINK
*JTVRPT,SYS:DIL/SE,SYS:XPORT/SE/EXCLUDE:XFUNCT/G
@SAVE
@
@; initialize the data file JOBTIC.RMS
@RUN IDXINI
@
You should compile and link the DECsystem-10 programs as follows:
.r cbl74
*=IDXINI.CBL
*=JTSERV.CBL/D:2000
*=JTTERM.CBL/D:2000
*=JTVRPT.CBL/D:2000
*^Z
.r macro
*PROCES=PROCES
.
.r link
*IDXINI/G
.save
.
.r link
*JTSERV,PROCES
DIL.DOC -- V2.1(142) 25-Jul-86 Page 43
DATA INTERCHANGE LIBRARY SAMPLE APPLICATION
*/SEG:LOW SYS:DIL/SE,SYS:XPORT/SE/EXCLUDE:XFUNCT,SYS:B361LB/SEA/G
.save
.
.r link
*JTTERM
*/SEG:LOW SYS:DIL/SE,SYS:XPORT/SE/EXCLUDE:XFUNCT,SYS:B361LB/SEA/G
.save
.
.r link
*JTVRPT
*/SEG:LOW SYS:DIL/SE,SYS:XPORT/SE/EXCLUDE:XFUNCT,SYS:B361LB/SEA/G
.save
.
.; initialize the data file JOBTIC.RMS
.run IDXINI
.
On the VAX, you should compile and link the VAX terminal interface
program as below:
$ cobol JTTERM.COB
$
$ link JTTERM,SYS$LIBRARY:DIL/LIB,SYS$LIBRARY:XPORT/LIB
$
Then, you should start the server program on the DECSYSTEM-20 as
follows:
@run JTSERV
Or, you should start the server program on the DECsystem-10 as
follows:
.run JTSERV
Once this is done, you can run the terminal interface programs from
either your VAX, DECSYSTEM-20, or DECsystem-10.
14.0 BUILDING DIL
This is a brief explanation of how to build DIL on a TOPS-10, TOPS-20
or VAX/VMS system.
15.0 BUILDING DIL ON TOPS-10
DIL.DOC -- V2.1(142) 25-Jul-86 Page 44
BUILDING DIL ON TOPS-10
NOTE
Before you attempt to build DIL on
TOPS-10, make sure you have Autopatch
Tape 8, or later, installed on your
system.
To build DIL on TOPS-10, customers should submit DIL.CTL. This
control file submits the following batch jobs in the order listed
below, with the switches specified:
o SUBMIT EXT1A.CTL/TIME/RESTART:YES/TAG:RENG
o SUBMIT XPN1A.CTL/DEPEND:1/TIME/RESTART:YES/TAG:RENG
o SUBMIT DAP1A.CTL/DEPEND:1/TIME/RESTART:YES/TAG:RENG
o SUBMIT DXCM10.CTL/DEPEND:1/TIME/RESTART:YES
o SUBMIT DLCM10.CTL/DEPEND:1/TIME/RESTART:YES/TAG:RENG
o SUBMIT DTCM10.CTL/DEPEND:1/TIME/RESTART:YES
o SUBMIT DLMK10.CTL/DEPEND:1/TIME/RESTART:YES/TAG:RENG
o SUBMIT INTR10.CTL/DEPEND:1/TIME/RESTART:YES
After the batch jobs finish processing, check the log files for
errors.
On TOPS-10 (only) there is a BLISS bug which causes request blocks to
be generated with references to specific disk structure names and UICs
of certain library files required by BLISS. Since not all systems
have the same disk structure names as the system used for building
DIL, it is necessary to patch the DIL.REL once the build is complete.
If you are building DIL for use on a single system, you can ignore
this patching process. However, if you intend to move DIL to another
DECsystem-10 with different structure names, you must patch your
version of DIL.
In order to patch the DIL.REL file the following procedure can be
used.
First, determine which disk structure name has been hardcoded into
your DIL.REL file. One way to do this is to copy the DIL.REL you
built onto a system with different structure names, and trying to link
a DIL application program there with the DIL.REL. The LINKER will
question you about the invalid structure name. For this example,
assume it is DSKA: that is discovered to be the invalid structure
name. It will be necessary to change any occurances of "DSKA" to
"SYS" in DIL.REL. In order to do this, all the occurances of "DSKA"
must first be located.
To find the address of every occurance of "DSKA", perform the
following command sequence:
.R FILDDT
DIL.DOC -- V2.1(142) 25-Jul-86 Page 45
BUILDING DIL ON TOPS-10
File: DIL.REL/D
<ESC>"/DSKA/<ESC>w ;search for all occurrences of "DSKA"
This command sequence will search for all occurrences of "DSKA" in
SIXBIT. To tailor this to your system, change the string "DSKA" in
the command sequence above to be the structure name where DIU was
built.
After you type the command sequence above, FILDDT should display the
following sort of information:
57227/ EQVM 7,410000(13)
64734/ EQVM 7,410000(13)
71701/ EQVM 7,410000(13)
76053/ EQVM 7,410000(13)
101027/ EQVM 7,410000(13)
102071/ EQVM 7,410000(13)
103651/ EQVM 7,410000(13)
111710/ EQVM 7,410000(13)
114053/ EQVM 7,410000(13)
116332/ EQVM 7,410000(13)
116517/ EQVM 7,410000(13)
123513/ EQVM 7,410000(13)
124627/ EQVM 7,410000(13)
127270/ EQVM 7,410000(13)
127435/ EQVM 7,410000(13)
127637/ EQVM 7,410000(13)
131173/ EQVM 7,410000(13)
131315/ EQVM 7,410000(13)
132541/ EQVM 7,410000(13)
132613/ EQVM 7,410000(13)
137627/ EQVM 7,410000(13)
144672/ EQVM 7,410000(13)
146242/ EQVM 7,410000(13)
151473/ EQVM 7,410000(13)
152043/ EQVM 7,410000(13)
152411/ EQVM 7,410000(13)
156602/ EQVM 7,410000(13)
160006/ EQVM 7,410000(13)
160571/ EQVM 7,410000(13)
162037/ EQVM 7,410000(13)
163223/ EQVM 7,410000(13)
You have now isolated the addresses of the culprit DSKA
specifications. Next, using the addresses you found above, you should
create a file called PATCH.DDT, which can be used by FILDDT to patch
the product, replacing "DSKA" with "SYS" for each occurrence. The
file should look something like the following:
57227/<ESC>"/SYS/
64734/<ESC>"/SYS/
71701/<ESC>"/SYS/
DIL.DOC -- V2.1(142) 25-Jul-86 Page 46
BUILDING DIL ON TOPS-10
76053/<ESC>"/SYS/
101027/<ESC>"/SYS/
102071/<ESC>"/SYS/
103651/<ESC>"/SYS/
111710/<ESC>"/SYS/
114053/<ESC>"/SYS/
116332/<ESC>"/SYS/
116517/<ESC>"/SYS/
123513/<ESC>"/SYS/
124627/<ESC>"/SYS/
127270/<ESC>"/SYS/
127435/<ESC>"/SYS/
127637/<ESC>"/SYS/
131173/<ESC>"/SYS/
131315/<ESC>"/SYS/
132541/<ESC>"/SYS/
132613/<ESC>"/SYS/
137627/<ESC>"/SYS/
144672/<ESC>"/SYS/
146242/<ESC>"/SYS/
151473/<ESC>"/SYS/
152043/<ESC>"/SYS/
152411/<ESC>"/SYS/
156602/<ESC>"/SYS/
160006/<ESC>"/SYS/
160571/<ESC>"/SYS/
162037/<ESC>"/SYS/
163223/<ESC>"/SYS/
Once you have created PATCH.DDT, submit a batch control file which
contains the following commands:
.R FILDDT
*DIL.REL/D/P
=^[Y
*PATCH.DDT
=^Z
Once this control file has successfully finished processing, the
patching is complete.
16.0 BUILDING DIL ON TOPS-20
NOTE
Before you attempt to build DIL on
TOPS-20, make sure you have Autopatch
Tape 8, or later, installed on your
DIL.DOC -- V2.1(142) 25-Jul-86 Page 47
BUILDING DIL ON TOPS-20
system.
To build DIL on TOPS-20, submit the following control files in the
following order, with the switches specified:
o SUBMIT EXT1A-DIL.CTL /TAG:COMBIN
o SUBMIT XPN1A-DIL.CTL /TAG:COMBIN /DEPEND:1 /TIME:00:10:00
o SUBMIT DAP1A-DIL.CTL /TAG:COMBIN /DEPEND:1 /TIME:00:10:00
o SUBMIT COMPDX.CTL /TAG:RENG /DEPEND:1 /TIME:00:15:00
o SUBMIT COMPDL.CTL /TAG:RENG /DEPEND:1
o SUBMIT COMPDT.CTL /TAG:RENG /DEPEND:1
o SUBMIT MAKDIL.CTL /TAG:RENG /DEPEND:1
o SUBMIT INTERFILS.CTL /TAG:RENG /DEPEND:1
After the batch jobs finish processing, check the log files for
errors.
17.0 BUILDING DIL ON VAX/VMS
NOTE
Before you attempt to build DIL on a
VAX/VMS system, make sure you have VMS
Version 3.1 or later installed on your
system.
The file BUILD.COM can be used to build the VAX DIL. BUILD.COM runs
five command files which compile and build all the image and object
files required.
BUILD.COM expects to find the following logical names: DILL:, DIXL:,
and DITL:. DILL: is the library of DIL specific sources while DIXL:
is the library of DIX specific sources, and DITL: is the library of
DIT specific sources. You can either define the logicals to point to
your build directory, or you can modify BUILD.COM and the six command
files which it uses so that they do not use these logical names. If
you decide to modify the command files, you will have to modify the
following files only:
o BUILD.COM
o COMDIX.COM
o COMDIT.COM
DIL.DOC -- V2.1(142) 25-Jul-86 Page 48
BUILDING DIL ON VAX/VMS
o COMDIL.COM
o DILOLB.COM
o DILEXE.COM
o INTERFILS.COM
Simply submit BUILD.COM for batch processing and wait for it to
finish. Verify that the build completed correctly by looking at the
log file, BUILD.LOG
[End of DIL.DOC]
Reference in New Issue View Git Blame Copy Permalink