github.com/PDP-10.stacken
1
0
Fork 0
mirror of https://github.com/PDP-10/stacken.git synced 2026-04-19 00:27:51 +00:00
Code Issues Projects Releases Wiki Activity
Files
master
PDP-10.stacken/files/stacken-tape-backup/dskb:10_7/sed/sed1mv.mac
Lars Brinkhoff 6e18f5ebef Extract files from tape images. 
Some tapes could not be extracted.
2021-01-29 10:47:33 +01:00

2322 lines
79 KiB
Plaintext
Raw Permalink Blame History

TITLE SED1MV - GENERAL SED NON-FILE-MODIFYING COMMANDS
SUBTTL A CHRISTOPHER HALL FECIT
;COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1979,1983.
SEARCH SEDSYM
SALL
IFN TOPS10,<
SEARCH UUOSYM
TWOSEG
RELOC 400000
>
IFE TOPS10,<
SEARCH MONSYM
>
;**********************************************************************
;HERE FOR THE ILLEGAL COMMAND
ILLCMD::PUSHJ P,RESTPM ;CLEAR UP THE PARAMETER STUFF ON THE SCREEN
ICMNPM::JRST ILCER2 ;SAY THE COMMAND IS ILLEGAL AND LOOP
;**********************************************************************
;DISPATCH AREAS FOR CURSOR CONTROL CHARACTERS
;IF ENTER WAS TYPED, UP GOES TO UPARG; LEFT TO LFTARG
RGTARG::TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
RIGHT:: TLO F,XPC ;CHARACTER POINTER IS NO LONGER GOOD
CAMGE CM,CPL.1 ;OFF THE RIGHT SIDE?
AOJA CM,AJDONE ;NO - JUST MOVE RIGHT
MOVE CM,LMARGN ;GO TO THE LEFT MARGIN
TLO F,XPL!XPC ;LINE POINTER IS NO GOOD EITHER
CAMGE RW,LPP.2 ;AT BOTTOM?
AOJA RW,AJDON0 ;NO - DROP DOWN ONE MORE
AOJA RW,RETROL ;YES - SEE IF SCREEN SHOULD BE ROLLED
DWNARG::TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
DOWN:: TLO F,XPL!XPC ;LINE POINTER IS NO LONGER GOOD
CAMGE RW,LPP.2 ;AT BOTTOM?
AOJA RW,AJDONE ;NO - DROP DOWN ONE MORE
SKIPE RLCFLG ;YES - WANT TO ROLL OR WRAP AROUND?
AOJA RW,DWNROL ;ROLL - GO DO IT
SETZ RW, ;WRAP - MOVE TO TOP
JRST AJDON0 ;GO POSITION CURSOR ABSOLUTELY
LEFT0: TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
LEFT:: TLO F,XPC ;CHARACTER POINTER IS NO LONGER GOOD
SOJGE CM,AJDONE ;MOVE LEFT - OFF THE EDGE?
MOVE CM,CPL.1 ;YES - SET TO RIGHT EDGE AND GO UP ONE
TLO F,XPL!XPC ;LINE POINTER IS NO LONGER GOOD
SOJGE RW,AJDON0 ;MOVE UP - OFF THE TOP?
JRST UPWRAP ;YES - ALWAYS WRAP AROUND
UPARG:: TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
UP:: TLO F,XPL!XPC ;LINE POINTER IS NO LONGER GOOD
SOJGE RW,AJDONE ;MOVE UP - OFF THE TOP?
SKIPE RLCFLG ;YES - WANT TO ROLL OR WRAP AROUND?
JRST UPROLL ;ROLL - GO DO IT
UPWRAP: MOVE RW,LPP.2 ;WRAP - SET TO BOTTOM
AJDON0: MOVEI DO,$CURHM ;MAKE CURSOR POSITION ABSOLUTELY
AJDONE: CAIN DO,$CURLF ;ELSE WANT A CURSOR LEFT?
JRST [PUSHJ P,CLEFT ;YES - HANDLE SEPARATELY
JRST AJDON1]
CAIGE DO,$ENTER+1 ;GOT A REAL CURSOR MOVE?
JRST AJDON2 ;NO - NO OUTPUT, THEN
PUSHJ P,@CMVTBL-34(DO) ;YES - MOVE THE CURSOR THE RIGHT WAY
AJDON1: PUSHJ P,PUTTYP
AJDON2: TLNE F,FLG ;WANT A SUBROUTINE RETURN?
CPOPJ:: POPJ P, ;YES
JRST LOOP ;NO - GO GET MORE INPUT
HOMARG::TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
HOME:: SETZB RW,CM ;SET TO TOP AND LEFT MARGIN OF SCREEN
TLO F,XPL!XPC ;LINE AND CHARACTER POINTERS ARE INVALID
PUSHJ P,CHOME ;MOVE THE CURSOR HOME
PUSHJ P,PUTTYP ;ELSE OUTPUT IT NOW
JRST LOOP
;LFTARG IS SPECIAL: IT OPERATES BOTH AS CURSOR MOVEMENT AND TO DELETE
;FROM THE PARAMETER BUFFER.
LFTAG0::MOVEI DO,$CURLF ;MAKE COMMAND LOOK LIKE A CURSOR LEFT
LFTARG::TRNE F,CMV ;DOING CURSOR MOVEMENT?
JRST LEFT ;YES - MOVE THE CURSOR
MOVE T2,PARPTR ;IS THIS THE 1ST CHARACTER OF THE PARAMETER?
CAMN T2,[POINT 7,PARBUF]
JRST LEFT0 ;YES - START CURSOR MOVEMENT
CAMN T2,[010700,,PARBUF-1]
JRST LOOP ;SKIP, IF USER DELETED ALL OF PARM
ADD T2,[70000,,0] ;FUDGE A DECREMENT OF THE PARM POINTER
CAIGE T2,0 ;IE, DELETE THE LATEST CHARACTER
SUB T2,[430000,,1]
MOVEM T2,PARPTR ;SAVE IT AGAIN
PUSHJ P,CLEFT ;ERASE A CHARACTER OF PARAMETER
MOVEI T1," "
IDPB T1,TY
PUSHJ P,CLEFT
PUSHJ P,PUTTYP
JRST LOOP ;AND GET A NEW COMMAND
;HERE FOR <CR> - OUTPUT A CARRIAGE RETURN-LINEFEED
RETARG::
IFE TOPS10,<
TRNN F,XCT!XBN ;IN AN EXECUTE BUFFER?
PBIN ;NO - EAT THE LF THAT'S SENT WITH THE RETURN
>
TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
JRST RETUR0 ;IT'S NEVER INSERT MODE IN A PARAMETER
RETURN::
IFE TOPS10,<
TRNN F,XCT!XBN ;IN AN EXECUTE BUFFER?
PBIN ;NO - EAT THE LF THAT'S SENT WITH THE RETURN
>
TRNE F,IMD ;IN INSERT MODE?
JRST RETIMD ;YES - ACT LIKE AN OPEN-LINE COMMAND
RETUR0: MOVE CM,LMARGN ;GO TO THE LEFT MARGIN
AOJ RW, ;AND DOWN ONE
TLO F,XPL!XPC ;LINE AND CHARACTER POINTERS ARE INVALID
CAMLE RW,LPP.2 ;OFF THE BOTTOM?
JRST RETROL ;YES - MOVE TO THE TOP OR ROLL
RETUR1: PUSHJ P,POSCUR ;MOVE TO THE RIGHT LINE
IFN FTNIH,<
MOVEI T1,100 ;DO A SHORT HIBER
HIBER T1,
JRST LOOP
>
JRST LOOP ;AND GET ANOTHER COMMAND
;HERE FOR RETURN IN INSERT MODE: INSERT A LINE, THEN RETURN
RETIMD: TRNE F,NCR ;BEHAVE LIKE A NORMAL CR?
JRST RETUR0 ;YES - GO BACK AND RETURN
TRNE F,RDO ;IS FILE READ-ONLY?
JRST RDOERR ;YES - COMMAND IS ILLEGAL
SOS ISVCNT ;DECREMENT INCREMENTAL SAVE COUNTER
PUSHJ P,CLRLNR ;CLEAR TO END OF PRESENT LINE
PUSHJ P,MAKCPT ;RE-MAKE CURSOR POSITION
MOVE T4,LMARGN ;INSERT A CRLF PLUS ENOUGH SPACES
ADDI T4,2 ; TO GET TO THE LEGT MARGIN
MOVEM T4,NUMCHR
PUSHJ P,MAKSPC
TLO F,XPB!CHG ;SAY BOTTOM POINTER BAD; FILE MODIFIED
MOVE PT,CHRPTR ;GET POINTER TO CURSOR POSITION
MOVEI T1,15 ;GET A CARRIAGE RETURN
IDPB T1,PT ;PUT IT OVER THE FIRST SPACE
MOVEI T1,12 ;GET A LINEFEED
IDPB T1,PT ;PUT IT NEXT TO THE CR
MOVEM PT,CHRPTR ;SAVE CHARACTER POINTER AGAIN
MOVEM PT,LINPTR ;IT'S NOW THE LINE POINTER, TOO
MOVE CM,LMARGN ;GO TO THE LEFT MARGIN
AOJ RW, ; OF THE NEXT LINE
CAML RW,LPP(TM) ;WORKING ON BOTTOM LINE?
JRST RETROL ;YES - MOVE TO THE TOP OR ROLL
MOVEI T4,1 ;GET SIZE OF OPEN
SKIPN T3,ILN(TM) ;CAN TERMINAL OPEN ITS OWN LINES?
JRST DISDWN ;NO - GO REDISPLAY FROM HERE DOWN
PUSHJ P,OPENLD ;OPEN UP THE SCREEN **NOTE: MAY NOT RETURN**
PUSHJ P,DISONE ;RE-WRITE LINE
PUSHJ P,FIXBLW ;PUT MESSAGES, IF ANY, ON THE BOTTOM LINE
JRST DISCUR ;POSITION CURSOR, OUTPUT, AND LOOP
;HERE IF RETURN TYPED AT BOTTOM OF SCREEN. IF NRC FLAG IS SET
;ROLL THE SCREEN ONE LINE, POSITION TO NEW BOTTOM. ELSE GO TO TOP
RETROL::TRNE F,NRC ;WANT TO ROLL?
JRST [SETZ RW, ;NO - MOVE TO THE TOP
JRST RETUR1] ;AND CONTINUE
DWNROL: TLNE F,ENT ;NO - ENTERING A PARAMETER?
SOJA RW,LOOP ;YES - DO NOTHING
MOVEI T4,1 ;NO - SET TO ROLL ONE LINE
JRST RFLNP1 ;DO THE ROLL AND LOOP
;HERE WHEN RLCFLG IS ON, THE CURSOR WAS ON THE TOP LINE, AND CURSOR-UP
;WAS TYPED. ROLL THE SCREEN DOWN A LINE
UPROLL: MOVE T1,DISPTR ;NO - ALREADY AT THE TOP OF THE FILE?
CAMN T1,[010700,,BUFFER-1]
AOJA RW,LOOP ;YES - DO NOTHING
TLNE F,ENT ;NO - ENTERING A PARAMETER?
JRST LOOP ;YES - DO NOTHING
MOVEI T4,1 ;NO - SET TO ROLL ONE LINE
JRST RBLNPM ;DO THE ROLL AND LOOP
;**********************************************************************
;UP-TAB: MOVE THE CURSOR UP 6 LINES
UPTARG::TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
UPTAB:: TLO F,XPL!XPC ;LINE POINTER IS NO LONGER GOOD
SUBI RW,6 ;MOVE UP SIX LINES
JUMPGE RW,DISCUR ;WRAP AROUND THE TOP TONIGHT?
ADD RW,LPP(TM) ;YES - WRAP 'TIL THE BROAD DAYLIGHT
JRST DISCUR ;REPOSITION CURSOR; DONE
;DOWN-TAB: MOVE THE CURSOR DOWN 6 LINES
DNTARG::TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
DNTAB:: TLO F,XPL!XPC ;LINE POINTER IS NO LONGER GOOD
ADDI RW,6 ;MOVE DOWN SIX LINES
CAMLE RW,LPP.1 ;WRAP AROUND THE BOTTOM?
SUB RW,LPP(TM) ;YES - COME BACK DOWN THE TOP
JRST DISCUR ;REPOSITION CURSOR; DONE
;MOVE TO START OF THE CURRENT LINE
BLIARG::TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
BLINE:: MOVE CM,LMARGN ;GO TO THE LEFT MARGIN
TLO F,XPC ;CHARACTER POINTER IS BAD
; SKIPN XXXFLG ;WANT TO MOVE TO THE START OF THE TEXT?
JRST DISCUR ;NO - DISPLAY THE CURSOR AND LOOP
PUSHJ P,MAKCPT ;YES - GET A GOOD CURSOR POINTER
CAIE T3," " ;GOT A SPACE OR TAB?
CAIN T3,11
JRST WTAB ;YES - WORD-WISE TAB OVER TO THE TEXT
JRST DISCUR ;NO - ALREADY AT THE START OF TEXT
;MOVE TO THE END OF THE CURRENT LINE
;NOTE: THE SEARCH CAN'T GO PAST THE END OF THE FILE BECAUSE THE FILE IS
; GUARANTEED TO END WITH A CRLF
ELIARG::TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
ELINE:: TLZE F,XPL ;IS THE LINE POINTER GOOD?
PUSHJ P,MAKLPT ;NO - RE-MAKE IT
MOVE PT,LINPTR ;GET THAT POINTER
SETZ CM, ;START AT COLUMN ZERO
TLZ F,XPC ;SAY CURSOR POINTER WILL BE GOOD, TOO
MOVE T4,CPL.1 ;GET POSITION OF RIGHT SIDE OF THE SCREEN
ADD T4,SL
ELINE1: MOVE T2,PT ;SAVE POINTER BEFORE THE CHARACTER
MOVE T3,CM ;AND THE CORRESPONDING COLUMN POSITION
ELINE2: CAML CM,T4 ;AT THE RIGHT OF THE SCREEN?
JRST ELIEE1 ;YES - THAT'S AS FAR AS THE CURSOR CAN GO
ILDB T1,PT ;GET A CHARACTER
ELINE3: JUMPE T1,ELINE2 ;SKIP NULLS
CAIN T1,15 ;CARRIAGE RETURN?
JRST ELINEE ;YES - CHECK FOR CRLF
CAIN T1," " ;SPACE?
AOJA CM,ELINE2 ;YES - COUNT IT BUT DON'T SAVE POSITION
CAIE T1,11 ;TAB?
AOJA CM,ELINE1 ;NO - COUNT THE CHARACTER AND LOOP
ORI CM,7 ;YES - COUNT ITS LENGTH
AOJA CM,ELINE2 ;COUNT IT BUT DON'T SAVE POSITION
ELINEE: MOVE T0,PT ;GOT A CR - GET A FRAGGABLE POINTER
ILDB T1,T0 ;GET (MAYBE) THE LF
CAIE T1,12 ;IS IT A LINEFEED?
AOJA CM,ELINE1 ;NO - COUNT THE CR; BACK TO THE FLOW
MOVEM T2,CHRPTR ;YES - SAVE THE POINTER TO THE EOL
MOVE CM,T3 ;AND THE COLUMN POSITION
SUB CM,SL ; ADJUSTED FOR SLIDE
JRST DISCUR ;DISPLAY THE CURSOR AND LOOP
ELIEE1: MOVEM PT,CHRPTR ;YES - SAVE THE POINTER TO THE EOL
SUB CM,SL ;ADJUST COLUMN POSITION FOR SLIDE
JRST DISCUR ;DISPLAY THE CURSOR AND LOOP
;**********************************************************************
;HERE FOR TAB - MOVE CURSOR POINTER AND CURSOR ON SCREEN
TABARG::TRON F,CMV ;ALREADY DOING CURSOR MOVEMENT?
PUSHJ P,MARKUP ;NO - PUT CURSOR BACK IN TEXT
TAB:: TRNE F,WTB ;WANT WORD-WISE TABS?
JRST WTAB ;YES - GO DO THEM
TAB0: TLO F,XPC ;MARK CHARACTER POINTER AS BAD
TLNE TM,STB ;WANT SETTABLE TABS?
JRST TABTB ;YES - GO DO THEM
MOVE T3,TABLEN ;GET LENGTH OF A TAB
CAIE T3,10 ;IS IT THE USUAL?
JRST TAB0A ;NO - HANDLE IT SPECIALLY
TRZ CM,7 ;YES - TAB OVER
ADDI CM,10
JRST TAB1
TAB0A: MOVE T1,CM ;MOVE TO NEXT USER-SET TAB STOP
IDIV T1,T3 ;MOVE BACK TO PREVIOUS STOP
IMUL T1,T3
ADD T1,T3 ;THEN JUMP TO NEXT ONE
MOVE CM,T1
TAB1: CAMLE CM,CPL.1 ;OFF THE RIGHT SIDE?
JRST RETUR0 ;YES - GO TO START OF NEXT LINE
JRST DISCUR ;NO - POSITION THE CURSOR AND GET NEW COMMAND
;HERE FOR DOING A TAB IN WORD-PROCESSING MODE: MOVE TO START OF NEXT WORD
;IE, LOOK FOR NEXT SPACE OR TAB; POINT TO NON- SPACE OR TAB AFTER THAT
;IF BEYOND END OF LINE JUST DO REGULAR TABS
;IF TAB WOULD GO OFF SCREEN MOVE TO START OF NEXT LINE
WTAB: TLNE F,XPC ;GOT POINTER TO CURRENT POSITION?
PUSHJ P,MAKCPT ;NO - RE-MAKE IT
MOVE PT,CHRPTR
MOVE T3,CM ;SAVE CURRENT POSITION
ILDB T1,PT ;GET FIRST CHARACTER
JUMPE T1,.-1 ;IGNORE IF NULL
CAIN T1,15 ;CARRIAGE RETURN?
PUSHJ P,ISCRLF ;YES - GOT A CRLF?
CAIA ;NO - CONTINUE
JRST WTABT ;YES - DO A NORMAL TAB AFTER END OF LINE
CAIN T1,11 ;TAB?
JRST WTABS1 ;YES - CHECK FOR TRAILING SPACES
SKIPE DELIM ;GOT ANY EXTRA DELIMITERS?
PUSHJ P,ISDELM ;YES - SEE IF THERE'S A MATCH
CAIN T1," " ;SPACE?
AOJA CM,WTABS ;YES - CHECK FOR TRAILING SPACES
AOSA T3,CM ;BUMP AND GET POSITION NUMBER
WTABC: MOVE T3,CM ;SAVE POSITION NUMBER
MOVE T2,PT ; AND CHARACTER POINTER
ILDB T1,PT ;GET NEXT CHARACTER
JUMPE T1,.-1 ;IGNORE IF NULL
SKIPE DELIM ;GOT ANY EXTRA DELIMITERS?
PUSHJ P,ISDELM ;YES - SEE IF THERE'S A MATCH
CAIN T1," " ;IS IT A SPACE?
AOJA CM,WTABCS ;YES - PHASE TWO
CAIN T1,11 ;NO - IS IT A TAB?
JRST WTABCT ;YES - COUNT IT AND SKIP SPACES
CAIN T1,15 ;CARRIAGE RETURN?
PUSHJ P,ISCRLF ;YES - GOT A CRLF?
AOJA CM,WTABC ;NO - SKIP THE CHARACTER
WTABX: MOVE CM,T3 ;GET POSITION BEFORE TRAILING SPACES
WTABX0: MOVEM T2,CHRPTR ;SAVE CHARACTER POINTER
JRST TAB1 ;AND FINISH OFF
WTABCT: TRZ CM,7 ;TAB OVER
ADDI CM,10
WTABCS: MOVEM CM,SAVEAC ;SAVE POSITION
MOVE T4,PT ;AND CHARACTER POINTER
ILDB T1,PT ;GET NEXT CHARACTER
JUMPE T1,.-1 ;IGNORE IF NULL
SKIPE DELIM ;GOT ANY ADDITIONAL DELIMITERS?
PUSHJ P,ISDELM ;YES - CHECK FOR THEM (SKIP IF MATCH)
CAIN T1," " ;SPACE?
AOJA CM,WTABCS ;YES - SKIP UNTIL NOT ONE OF THOSE
CAIN T1,11 ;TAB?
JRST WTABCT ;YES - COUNT THE TAB AND SKIP IT
CAIN T1,15 ;CARRIAGE RETURN?
PUSHJ P,ISCRLF ;YES - GOT A CRLF?
SKIPA CM,SAVEAC ;NO - GET POINTER TO THIS CHARACTER
JRST WTABX ;YES - GO POSITION TO END OF LINE
MOVEM T4,CHRPTR
JRST TAB1 ;MOVE CURSOR TO HERE
;HERE IF CHARACTER AT CURSOR IS SPACE OR TAB
WTABS: MOVE T2,PT ;SAVE POSITION
ILDB T1,PT ;GET CHARACTER AFTER <CR>
JUMPE T1,.-1 ;IGNORE IF NULL
SKIPE DELIM ;GOT ANY ADDITIONAL DELIMITERS?
PUSHJ P,ISDELM ;YES - CHECK FOR THEM (SKIP IF MATCH)
CAIN T1," " ;SPACE?
AOJA CM,WTABS ;YES - COUNT AND SKIP IT
CAIN T1,11 ;TAB?
JRST WTABS1 ;YES - TAB OVER
CAIN T1,15 ;CARRIAGE RETURN?
PUSHJ P,ISCRLF ;YES - GOT A CRLF?
JRST WTABX0 ;NO - POSITION TO CURRENT CHARACTER
WTABT: MOVE CM,T3 ;YES - HERE IF AT EOL - GET STARTING CM
JRST TAB0 ;GO MOVE TO NEXT TAB STOP
WTABS1: TRO CM,7 ;GOT A TAB - TAB OVER
AOJA CM,WTABS ;AND KEEP SKIPPING
;SUBROUTINE FOR WHEN A CARRIAGE RETURN IS FOUND IN THE STRING AT (PT)
;IF THE NEXT CHARACTER IS A LINEFEED, GIVES A SKIP RETURN; ELSE NORMAL
;TYPICAL CALL: CAIN T1,15; PUSHJ P,ISCRLF; <NOT CRLF>; <GOT CRLF>
;PRESERVES EVERYTHING EXCEPT AC T0
ISCRLF::MOVE T0,PT ;GET THE CHARACTER AFTER THE CARRIAGE RETURN
ILDB T0,T0
CAIN T0,12 ;IS IT A LINEFEED?
CPOPJ1::AOS (P) ;YES - GIVE A SKIP RETURN
POPJ P, ;NO - NORMAL RETURN
;SUBROUTINE TO CHECK THE CHARACTER IN T1 AGAINST THE LIST IN DELIM
;RETURNS +1 IF NO MATCH, +2 IF A CHARACTER IN THE LIST MATCHES
ISDELM: DMOVEM T1,SAVEAC+1 ;SAVE THE FRAGGED ACS (T1, T2)
IDIVI T1,^D9 ;GET WORD AND POSITION IN WORD
LDB T0,CHRTAB(T2) ;READ THE RIGHT FLAGS BYTE
DMOVE T1,SAVEAC+1 ;RESTORE THE FRAGGED ACS
TRNE T0,1 ;IS THIS A DELIMITER CHARACTER?
AOS (P) ;YES - GIVE A SKIP RETURN
POPJ P,
;HERE TO DO A TAB USING THE USER'S SETTINGS
;DOES A CARRIAGE RETURN IF NO TABS ARE LEFT ON THIS LINE
TABTB: PUSHJ P,TABSUB ;SET UP
ASH T4,(T2) ;SET ONES TO THE LEFT OF THE DESIRED BIT
MOVE T3,TABTBL(T1) ;GET THE RIGHT WORD OF THE TABLE
TDZ T3,T4 ;CLEAR ALL BITS TO THE LEFT OF POSITION
TABTB1: JFFO T3,TABTB2 ;FIND THE NEXT 1-BIT
TABT1A: CAIL T1,3 ;NONE FOUND - ANY REMAINING?
JRST RETUR0 ;NO - GO TO START OF NEXT LINE
SKIPE T3,TABTBL+1(T1) ;YES - PICK UP NEXT WORD - ANY TABS?
AOJA T1,TABTB1 ;YES - FIND FIRST ONE
AOJA T1,TABT1A ;NO - SKIP IT AND CHECK NEXT ONE
BTBTBX: JFFO T3,.+1 ;FIND INDEX OF PREVIOUS TAB
TABTB2: IMULI T1,^D36 ;CONVERT WORD AND POSITION
ADD T1,T4 ; BACK TO CURSOR VALUE
CAMLE T1,CPL.1 ;AT OR BEYOND THE END OF THE SCREEN?
JRST RETUR0 ;YES - MOVE TO START OF NEXT LINE INSTEAD
MOVE CM,T1 ;NO - CHANGE COLUMN POSITION
JRST DISCUR ;POSITION THE CURSOR; DONE
;HERE TO HANDLE A BACK-TAB - MOVE BACK TO THE NEAREST TAB STOP
BTBARG::TRNE F,CMV ;DOING CURSOR MOVEMENT?
JRST BAKTAB ;YES - MOVE THE CURSOR
MOVE T2,PARPTR ;IS THIS THE 1ST CHARACTER OF THE PARAMETER?
CAMN T2,[POINT 7,PARBUF]
JRST BAKTBA ;YES - START CURSOR MOVEMENT
IBP T2 ;MAKE THE BYTE POINTER RIGHT FOR DECREMENTING
MOVEI T3,1 ;AND SET UP COUNT OF CHARACTERS DELETED
BTBAG1: PUSHJ P,BTBGET ;GET NEXT-MOST-RECENT CHARACTER
CAIE T1," " ;SPACE,
CAIN T1,11 ; OR TAB?
AOJA T3,BTBAG1 ;YES - SKIP OVER IT
IFN TOPS10,<
CAIGE T1,"0" ;NUMERIC?
JRST BTBG1A ;NO - KEEP CHECKING
CAIG T1,"9"
JRST BTBAG2 ;YES - PHASE TWO
BTBG1A: CAIL T1,"A" ;ALPHABETIC?
CAILE T1,"Z"
JRST BTBGX0 ;NO - STOP ON THE SPECIAL CHARACTER
>
BTBAG2: PUSHJ P,BTBGET ;GET NEXT-MOST-RECENT CHARACTER
CAIGE T1,"0" ;NUMERIC?
JRST BTBG2A ;NO - KEEP CHECKING
CAIG T1,"9"
AOJA T3,BTBAG2 ;YES - SKIP OVER IT
BTBG2A: CAIGE T1,"A" ;ALPHABETIC?
JRST BTBAGX ;NO - STOP HERE
CAIG T1,"Z"
AOJA T3,BTBAG2 ;YES - SKIP OVER IT
JRST BTBAGX ;NO - STOP HERE
BTBGX0: PUSHJ P,BTBGET ;BACK OVER ONE MORE CHARACTER
BTBAGX: MOVEM T2,PARPTR ;SAVE ADJUSTED PARAMETER POINTER
MOVEI T4," "
BTBGX1: PUSHJ P,CLEFT ;ERASE A CHARACTER OF PARAMETER
IDPB T4,TY
PUSHJ P,CLEFT
SOJG T3,BTBGX1 ;LOOP THROUGH ALL CHARACTERS
PUSHJ P,PUTTYP
JRST LOOP ;THEN GET A NEW COMMAND
;BACKTAB SUBROUTINE TO GET THE NEXT-LATEST PARAMETER CHARACTER
BTBGET: CAMN T2,[010700,,PARBUF-1]
JRST KILPAR ;JUMP IF NOTHING LEFT IN THE BUFFER
ADD T2,[70000,,0] ;GET NEXT-MOST-RECENT CHARACTER
CAIGE T2,0
SUB T2,[430000,,1]
LDB T1,T2
CAIL T1,"a" ;LOWER CASE (MAYBE)?
SUBI T1,40 ;YES - CONVERT TO (MAYBE) UPPER
POPJ P, ;DONE
;HERE TO DO A BACKTAB ON THE SCREEN
BAKTBA: TRO F,CMV ;SET UP FOR CURSOR MOVEMENT
PUSHJ P,MARKUP
BAKTAB::TRNE F,WTB ;WANT WORD-WISE BACKTABS?
JRST WBTAB ;YES - GO DO THEM
TLO F,XPC ;MARK CHARACTER POINTER AS BAD
TLNE TM,STB ;WANT SETTABLE TABS?
JRST BTBTB ;YES - GO DO THEM
MOVE T3,TABLEN ;GET LENGTH OF A TAB
CAIE T3,10 ;IS IT THE USUAL?
JRST BAKTB0 ;NO - HANDLE IT SPECIALLY
TRZN CM,7 ;YES - TAB BACKWARD
SUBI CM,10
JRST BAKTB1 ;FINISH OFF
BAKTB0: SOSGE T1,CM ;GET AND DECREMENT POSITION. IF AT LEFT,
JRST BAKTB2 ; MOVE TO RIGHT OF PREVIOUS LINE
IDIV T1,T3 ;ELSE MOVE TO PREVIOUS TAB STOP
IMUL T1,T3
MOVE CM,T1
BAKTB1: JUMPGE CM,DISCUR ;DONE, IF ON SCREEN
BAKTB2: MOVE CM,CPL.1 ;ELSE MOVE TO RIGHT
SOJGE RW,DISCUR ; OF NEXT HIGHER LINE
MOVE RW,LPP.2 ;IF AT TOP, MOVE TO BOTTOM
JRST DISCUR
;HERE FOR DOING A BACK-TAB IN WORD-PROCESSING MODE
;MOVE TO START OF PREVIOUS WORD
;IE, LOOK FOR NEXT SPACE OR TAB; POINT TO NEXT NON- SPACE OR TAB
;IF AT START OF LINE, MOVE TO END OF PREVIOUS LINE (BUT NOT OFF SCREEN)
WBTAB:: TLNE F,XPC ;GOT POINTER TO CURRENT POSITION?
PUSHJ P,MAKCPT ;NO - RE-MAKE IT
TLNE F,XPL ;IS CURSOR BEYOND END OF BUFFER?
JRST WBTABO ;YES - MOVE IT TO END OF LAST LINE
JUMPE CM,WBTABB ;IF AT START OF LINE, MOVE TO END OF PREVIOUS
MOVE PT,CHRPTR
JRST WBTBS1 ;START WITH CHARACTER AT CURSOR
WBTABS: ADD PT,[70000,,0] ;SKIP SPACES AFTER WORD
CAIGE PT,0
SUB PT,[430000,,1]
WBTBS1: LDB T1,PT ;GET IT
JUMPE T1,WBTABS ;IGNORE IF NULL
SKIPE DELIM ;GOT ANY EXTRA DELIMITERS
PUSHJ P,ISDELM ;YES - SEE IF THERE'S A MATCH
CAIN T1," " ;SPACE?
JRST WBTABS ;YES - SKIP UNTIL NOT ONE OF THOSE
CAIN T1,11 ;TAB?
JRST WBTABS ;YES - SKIP THAT, TOO
CAIN T1,12 ;NO - GOT A CARRIAGE RETURN?
JRST WBTABL ;YES - CHECK FOR END OF LINE
WBTABC: ADD PT,[70000,,0] ;SKIP TO BEGINNING OF PREVIOUS WORD
CAIGE PT,0
SUB PT,[430000,,1]
LDB T1,PT ;GET IT
WBTBC1: CAIE T1," " ;IS IT A SPACE
CAIN T1,11 ; OR A TAB?
JRST WBTABX ;YES - DONE
CAIN T1,12 ;NO - GOT A LINEFEED?
JRST WBTABL ;YES - CHECK FOR END OF LINE
SKIPE DELIM ;GOT ANY EXTRA DELIMITERS
PUSHJ P,ISDELM ;YES - SEE IF THERE'S A MATCH
JRST WBTABC ;NO - KEEP SKIPPING
WBTABX: MOVEM PT,CHRPTR ;SAVE POINTER TO START OF NEXT WORD
MOVE PT,LINPTR ;GET POINTER TO START OF LINE
JRST WBTABE ;AND FINISH OFF
WBTABL: ADD PT,[70000,,0] ;POINT TO PREVIOUS CHARACTER
CAIGE PT,0
SUB PT,[430000,,1]
LDB T1,PT ;GET CHARACTER BEFORE <LF>
CAIE T1,15 ;CARRIAGE RETURN?
JRST WBTBC1 ;NO - KEEP LOOKING
WBTBL1: SETZ CM, ;YES - POSITION TO START OF THE LINE
TLO F,XPC ;MAKE CHAR PTR GET REMADE
JRST DISCUR ;POSITION CURSOR; DONE
WBTABB: SOJL RW,HOME ;MOVE UP A LINE - IF AT TOP, GO HOME
MOVE T3,LINPTR ;GET POINTER TO START OF LINE
EXCH T3,DISPTR ;FUDGE IT TO BE DISPLAY PTR
MOVEI T4,1 ;BACK UP TO START OF PREVIOUS LINE
JUMPN SL,[MOVE T1,LINPTR ;IF SLIDE, PRETEND POINTING
MOVEM T1,CHRPTR ;TO START OF LINE
JRST .+1]
PUSHJ P,BAKDPT
MOVEM T3,DISPTR ;SAVE REAL DISPLAY POINTER AGAIN
MOVEM PT,LINPTR ;SAVE RE-DONE LINE POINTER
MOVE T4,CHRPTR ;NOW FIND END OF LINE
WBTBBN: ADD T4,[70000,,0] ;POINT TO PREVIOUS CHARACTER
CAIGE T4,0
SUB T4,[430000,,1]
LDB T1,T4 ;GET PREVIOUS CHARACTER
JUMPE T1,WBTBBN ;SKIP NULLS
CAIN T1,12 ;LINEFEED?
JRST WBTBBN ;YES - SKIP IT, TOO
JRST WBTBB3 ;NO - BACK TO THE FLOW
WBTBB1: ADD T4,[70000,,0] ;POINT TO PREVIOUS CHARACTER
CAIGE T4,0
SUB T4,[430000,,1]
WBTBB2: LDB T1,T4 ;GET PREVIOUS CHARACTER
JUMPE T1,WBTBB1 ;SKIP NULLS (AND MAYBE LINEFEED)
WBTBB3: CAIE T1," " ;TRAILING SPACE
CAIN T1,11 ; OR TAB?
JRST WBTBB1 ;YES - SKIP IT
SKIPE DELIM ;GOT ANY EXTRA DELIMITERS
PUSHJ P,ISDELM ;YES - SEE IF THERE'S A MATCH
CAIN T1,15 ;CARRIAGE RETURN?
JRST WBTBB1 ;YES - SKIP IT
CAIN T1,12 ;NOTHING ON THIS LINE?
JRST [MOVE T2,T4 ;MAYBE - GET THE PREVIOUS CHARACTER
ADD T2,[70000,,0]
CAIGE T2,0
SUB T2,[430000,,1]
LDB T1,T2
CAIE T1,15 ;IS IT A CRLF PAIR?
JRST .+1 ;NO - CONTINUE
TLZE F,FLG ;YES - WANT TO RE-DO RW?
PUSHJ P,CALCRW ;YES (ONLY IF BEYOND END OF BUFFER)
JRST WBTBL1] ;MOVE TO START OF LINE
MOVEM T4,CHRPTR ;SAVE CHARACTER POINTER
TLZE F,FLG ;WANT TO RE-DO RW?
PUSHJ P,CALCRW ;YES (ONLY IF BEYOND END OF BUFFER)
MOVE PT,LINPTR ;SAVE RE-DONE LINE POINTER
WBTABE: SETZ CM, ;CLEAR COLUMN NUMBER
WBTBE0: CAMN PT,CHRPTR ;UP TO CHARACTER POSITION?
JRST WBTBE1 ;YES - FINISH OFF
ILDB T1,PT ;GET NEXT CHARACTER
JUMPE T1,WBTBE0 ;IGNORE IF NULL
CAIE T1,11 ;TAB?
AOJA CM,WBTBE0 ;NO - COUNT AS ONE CHARACTER
TRZ CM,7 ;YES - COUNT THE TAB
ADDI CM,10
JRST WBTBE0 ;AND LOOP
WBTBE1: SUB CM,SL ;REMOVE THE SLIDE FROM THE COLUMN
JUMPL CM,WBTBE2 ;JUMP IF OFF THE LEFT
CAMGE CM,CPL.1 ;OFF THE RIGHT?
JRST DISCUR ;NO - GO DISPLAY
SKIPA CM,CPL.1 ;POSITION CURSOR AT RIGHT
WBTBE2: SETZ CM, ;POSITION CURSOR AT LEFT
TLO F,XPC ;COLUMN POINTER IS NOT GOOD
JRST DISCUR
WBTABO: TLO F,FLG ;SET FLAG SO RW WILL BE REMADE
MOVE T4,CHRPTR ;GET POINTER TO CURRENT CHARACTER
JRST WBTBB2 ;BACK UP TO END OF LAST LINE
;HERE TO DO A TAB USING THE USER'S SETTINGS. IF NO TABS LEFT, GOES TO
;START OF LINE. IF AT START, GOES TO LAST TAB ON PREVIOUS LINE
BTBTB: PUSHJ P,TABSUB ;SET UP
BTBTB0: JUMPE T2,BTBTB1 ;IF AT POSITION 0 JUST CHECK PREVIOUS WORD
ASH T4,1(T2) ;CLEAR THE FLAGS TO THE RIGHT OF THE CURSOR
AND T4,TABTBL(T1)
JUMPN T4,BTBTB2 ;JUMP IF THERE ARE TABS TO CHECK
BTBTB1: SOJL T1,BTBTB4 ;IF NO PREVIOUS TAB, GO TO END OF PREV. LINE
SKIPN T4,TABTBL(T1) ;GET NEXT WORD OF TAB TABLE - ANY TABS SET?
JRST BTBTB1 ;NO - CHECK PREVIOUS WORD
BTBTB2: MOVEI T3,1 ;YES - ASSUME BIT IS ON IN RIGHT HALF
TRNN T4,777777 ;IS THERE ONE IN THE RIGHT HALF?
MOVSI T3,1 ;OF COURSE NOT - CHECK LEFT HALF
BTBTB3: TDNE T3,T4 ;IS THIS THE 1-BIT?
JRST BTBTBX ;YES - SET UP RETURN VALUE AND RETURN
LSH T3,1 ;NO - CHECK NEXT BIT
JRST BTBTB3
BTBTB4: TDZE CM,CM ;NO PREVIOUS TABS - MOVE TO START OF LINE
JRST DISCUR ; IF NOT THERE ALREADY
JUMPE RW,DISCUR ;ELSE FREEZE ON HOME, IF THERE
TLO F,XPL ;ELSE MARK LINE POINTER AS BAD
MOVE CM,CPL.1 ;AND FIND LAST TAB ON PREVIOUS LINE
SOJA RW,BTBTB0
;**********************************************************************
;HERE FOR SETTABLE TAB STOPS - SET A STOP
TABSET::PUSHJ P,TABSUB ;SET UP
LSH T4,(T2) ;SHIFT RIGHT TO THE RIGHT POSITION
ORM T4,TABTBL(T1) ;SET THAT BIT
TLO TM,STB ;TURN ON SETTABLE TABS
JRST DISCUR ;DONE
;HERE TO CLEAR A TAB STOP OR DO SPECIAL FUNCTIONS
TABCLR::DMOVE RW,SAVPOS ;RESTORE SAVED POSITION
TRZE F,CMV ;DID USER USE CURSOR MOVEMENT?
JRST TBSERR ;YES - ERROR
MOVE T2,PARPTR ;GOT A PARAMETER?
CAME T2,[POINT 7,PARBUF]
CAMN T2,[010700,,PARBUF-1]
JRST TBCLR1 ;NO - JUST CLEAR ONE TAB
SETZ T1, ;YES - END PARAMETER BUFFER WITH A NULL
IDPB T1,PARPTR
LDB T1,[POINT 7,PARBUF,6] ;GET 1ST CHARACTER OF PARAMETER
ANDI T1,137 ;FORCE IT TO UPPER CASE
CAIN T1,"C" ;SOME TYPE OF "C"?
JRST TBCLRC ;YES - CLEAR ALL TAB SETTINGS
CAIN T1,"D" ;SOME TYPE OF "D"?
JRST TBCLRD ;YES - DISPLAY THE SETTINGS AND A RULER
TBSERR: MOVEI T1,[ASCIZ /####Bad parameter for <TAB-SET>/]
JRST ERROR ;ANYTHING ELSE IS AN ERROR
TBCLR1: PUSHJ P,TABSUB ;SET UP
LSH T4,(T2) ;SHIFT RIGHT TO THE RIGHT POSITION
ANDCAM T4,TABTBL(T1) ;CLEAR THAT BIT
TBCLX0: TLO TM,STB ;TURN ON SETTABLE TABS
TBCLRX::PUSHJ P,ERASPM ;ERASE THE PARAMETER
JRST LOOP ;DONE
TBCLRC: SETZM TABTBL ;ZERO THE ENTIRE TAB TABLE
SETZM TABTBL+1
SETZM TABTBL+2
SETZM TABTBL+3
JRST TBCLX0 ;ERASE PARAMETER AND LOOP
;HERE TO DISPLAY THE CURRENT TAB SETTINGS AND A RULER
;ON THE BOTTOM LINE OF THE SCREEN
TBCLRD: PUSHJ P,SWHBOT ;SET UP THE BOTTOM LINE
MOVEM TY,SAVEAC ;SAVE POINTER TO START OF RULER
MOVEI T4,^D14 ;OUTPUT 14 COPIES OF THE RULER
MOVEI T1,[ASCIZ /1234567890/]
PUSHJ P,PUTSTG
SOJG T4,.-2 ;(NOTE: WHEN THIS IS DONE T4/ 0)
MOVEI T1,"-" ;GET THE TAB-MARKING CHARACTER
MOVEI T0,"/" ;GET THE LEFT-MARGIN-MARKING CHARACTER
MOVE PT,LMARGN ;ADD THE LEFT-MARGIN SETTING
SETZ T3, ;START THE COUNT AT ZERO
TBCRD0: HRLI T3,-^D36 ;COUNT THROUGH ALL THE BITS IN THE WORD
MOVE T2,TABTBL(T4) ;GET A WORD OF THE TABLE
TBCRD1: ROT T2,1 ;LOOK AT THE NEXT 1-BIT
CAIN PT,(T3) ;AT THE LEFT OR RIGHT MARGIN?
JRST TBCRDL ;YES - MARK THIS POSITION
TRNE T2,1 ;IS THERE A TAB THERE?
JRST TBCRDM ;YES - MARK THIS POSITION
IBP SAVEAC ;ELSE SKIP OVER THAT SPACE IN THE RULER
TBCRD2: AOBJN T3,TBCRD1 ;LOOP THROUGH ALL THE BITS IN THE WORD
CAIGE T4,3 ;ANY MORE WORDS IN THE TABLE?
AOJA T4,TBCRD0 ;YES - LOOK AT THE NEXT ONE
JRST SWHNPE ;FINISH OFF, OUTPUT RULER, AND LOOP
TBCRDM: IDPB T1,SAVEAC ;SAY THERE'S A TAB IN THAT SPACE
JRST TBCRD2 ;CONTINUE
TBCRDL: IDPB T0,SAVEAC ;MARK THE LEFT OR RIGHT MARGIN
MOVEI T0,"\" ;GET THE RIGHT-MARGIN-MARKING CHARACTER
MOVE PT,RMARGN ;AND THE RIGHT-MARGIN SETTING
JRST TBCRD2 ;CONTINUE
;SUBROUTINE TO SET UP FOR THE TAB ROUTINES
TABSUB: MOVE T1,CM ;GET CURRENT COLUMN POSITION
IDIVI T1,^D36 ;GET WORD AND POSITION IN WORD
MOVN T2,T2 ;NEGATE POSITION
MOVSI T4,400000 ;GET BIT FOR SHIFTING
POPJ P,
;SUBROUTINE TO SET UP CONSTANT-LENGTH TABS IN THE TAB TABLE
TABINI::SETZB T1,T2 ;CLEAR OUT THE EXISTING TABS
DMOVEM T1,TABTBL
DMOVEM T1,TABTBL+2
MOVN T2,TABLEN ;GET THE NEGATIVE DISTANCE BETWEEN TABS
JUMPE T2,CPOPJ ;DONE IF DISTANCE IS ZERO
MOVSI T1,-4 ;SET UP IOWD INTO TAB TABLE
MOVSI T3,400000 ;AND STARTING TAB BIT
TABIN1: LSHC T3,(T2) ;SHIFT THE BIT OVER THE RIGHT AMOUNT
JUMPN T3,TABIN2 ;JUMP IF STILL IN THE SAME WORD OF THE TABLE
MOVE T3,T4 ;ELSE PUT THE BIT IN THE RIGHT AC
AOBJP T1,CPOPJ ;MOVE TO NEXT WORD; DONE IF COUNTED OUT
TABIN2: ORM T3,TABTBL(T1) ;SAVE THE BIT IN THE TAB TABLE
JRST TABIN1 ;AND LOOP TO SET ANOTHER BIT
;**********************************************************************
;HERE TO GO TO SOME GIVEN PERCENT OF THE FILE
;EXCEPTION: GOTO 100% PUTS UP THE LAST LINROL LINES INVARIABLY
PERCEN::MOVE T4,GOPERC ;SET UP LAST TIME'S NOMINAL
MOVEM T4,PARG1
PUSHJ P,PEEL.1 ;READ NEW PARM, IF ANY
CAIE T1,0 ;JUMP IF JUST ENTER-PERCENT TYPED
SKIPA T4,PARG1 ;ELSE GET PERCENT TO MOVE
MOVEI T4,^D100 ;TREAT ENTER-PERCENT LIKE ENTER-100-PERCENT
PUSHJ P,RESTPM
JUMPL T4,PERERR ;ERROR IF NEGATIVE
CAILE T4,^D100 ;OR LARGER THAN 100
JRST PERERR
MOVEM T4,GOPERC ;ELSE SAVE AS NEW NOMINAL
TLNE TM,XCI ;INITIALIZING FOR AN EXECUTE?
JRST LOOP ;YES - DONE NOW
PERNPM::PUSHJ P,PUSMKS ;PUSH DISPLAY POINTER ON THE MARKER STACK
MOVE T4,GOPERC ;SET UP LAST TIME'S NOMINAL
SETZB RW,CM ;PUT CURSOR IN UPPER LEFT
JUMPE T4,PERCST ;IF GOTO 0 PERCENT, GO TO START
TLO F,XPL!XPC!XPB ;MARK NO POINTERS AS VALID
CAIN T4,^D100 ;GOTO 100 PERCENT?
JRST PERCND ;YES - HANDLE SPECIALLY
HRRZ T1,EN ;GET SIZE OF FILE
SUBI T1,BUFFER
IMUL T1,T4 ;TIMES DISTANCE USER WANTS TO GO
IDIVI T1,^D100 ;DIVIDED INTO 100-WORD PIECES
ADD T1,[010700,,BUFFER-1] ;GIVES POINTER INTO FILE
MOVEM T1,DISPTR ;SAVE AS NEW DISPLAY POINTER
MOVEI T4,1 ;GO TO THE START OF THE NEXT LINE
CAME T1,[010700,,BUFFER-1] ;DON'T BACK UP IF AT START
PUSHJ P,ADVDPT
JRST PERDIS ;RE-DISPLAY AND GET ANOTHER COMMAD
PERCND: MOVEM EN,DISPTR ;DISPLAY FROM ONE ROLLS-WORTH FROM END OF FILE
MOVE T4,LINROL
PUSHJ P,BAKDPT
MOVE T2,EN ;POINT TO LAST REAL FILE CHARACTER
PERCD1: ADD T2,[70000,,0] ;BACK IT UP A NOTCH
CAIGE T2,0
SUB T2,[430000,,1]
LDB T1,T2 ;GET CHARACTER
CAIGE T1," " ;IS IT A REAL CHARACTER?
JRST PERCD1 ;NO - KEEP LOOKING
HRRZ T1,DISPTR ;IS CHARACTER POINTER ON SCREEN?
CAIL T1,(T2)
JRST [SETZB RW,CM ;NO - MOVE CURSOR HOME
TLO F,XPC ;CHARACTER POINTER IS BAD
JRST PERCD2] ;FINISH OFF
MOVEM T2,CHRPTR ;POSITION CURSOR TO VERY END OF FILE
PUSHJ P,CALCRW ;CALCULATE PROPER VALUE OF RW
PUSHJ P,CALCML ;CALCULATE PROPER VALUE OF CM
AOSA RW, ;IF SLIDE, MOVE TO START OF NEXT LINE
AOJA CM,PERCD2 ;MOVE TWO COLUMNS AWAY FROM LAST CHARACTER
SETZB CM,SL ;ELSE MOVE TO START OF NEXT LINE
TLOA F,XPL!XPC!XPB ;AND MARK NO POINTERS AS VALID
PERCD2: TLO F,XPC!XPB ;LINE POINTER IS THE ONLY ONE O.K.
PERDIS: TRNE F,RST ;WANT TO RESTORE NOMINALS?
SETZM GOPERC ;YES - SET BACK TO ZERO PERCENT
JUMPE DO,NEWFL0 ;IF /GO SWITCH, FINISH THE SETTING-UP
JRST DISALL ;ELSE RE-DISPLAY THE SCREEN AND LOOP
PERCST: PUSHJ P,PNTSTT ;SET UP POINTERS TO START OF FILE
JRST PERDIS ;RE-DISPLAY AND GET ANOTHER COMMAND
PERERR: MOVEI T1,[ASCIZ /#Percent must be between 0 and 100/]
JRST ERROR
;**********************************************************************
;HERE TO SLIDE THE VIEWING WINDOW TO THE LEFT
SLIDEL::MOVE T4,SLIDES ;SET UP LAST TIME'S SLIDE AS NOMINAL
MOVEM T4,PARG1
PUSHJ P,PEEL.1 ;READ NEW PARM, IF ANY
MOVE T4,PARG1 ;GET LINES TO ROLL
MOVEM T4,SLIDES ;SAVE AS NEW NOMINAL
PUSHJ P,ERASPM
TLNE TM,XCI ;INITIALIZING FOR AN EXECUTE?
JRST LOOP ;YES - DONE NOW
SLLNPM::SKIPN SLDFLG ;NEVER WANT TO SLIDE?
JRST LOOP ;RIGHT - DON'T
JUMPE SL,LOOP ;NOTHING TO DO IF AT LEFT MARGIN
MOVE T4,SLIDES ;GET DISTANCE TO SLIDE
SUB SL,T4 ;SLIDE TO THE LEFT
ADD CM,T4 ;KEEP CURSOR IN SAME POSITION IN TEXT
JUMPL SL,[ADD CM,SL ;IF GONE TOO FAR, STOP AT LEFT EDGE
ADD T4,SL
SETZ SL, ;YES - STOP AT THE LEFT EDGE
JRST .+1]
CAMGE CM,CPL.1 ;HAS CURSOR GONE OFF THE RIGHT?
JRST SLLNP1 ;NO - O.K.
MOVE CM,CPL.1 ;YES - MOVE IT TO THE EDGE OF THE SCREEN
TLO F,XPC ;CHARACTER POINTER IS NOW BAD
SLLNP1:
IFN FTIMD,<
CAIGE T4,^D24 ;SLIDING ALMOST A SCREENFUL?
SKIPN IMO(TM) ;DOES TERMINAL HAVE AN INSERT MODE?
>
JRST SLREND ;NO - GO FINISH UP
IFN FTIMD,<
;FOR EVERY LINE ON THE SCREEN, OPEN T4 SPACES AND WRITE INTO THE HOLE
PUSH P,RW ;SAVE CURRENT POSITION
PUSH P,CM
MOVE PT,LPP.1 ;GET NUMBER OF LINES ON THE SCREEN, LESS BOTTOM
MOVE CM,CPL(TM) ;AND NUMBER OF CHARS THAT CAN STAY AROUND
SUB CM,T4
SETZ RW,
PUSHJ P,POSCUR ;POSITION THE CURSOR
CAIA ;AND SKIP
SLLIMD: PUSHJ P,CDOWN ;MOVE DOWN A LINE
PUSHJ P,CLRLNR ;CLEAR THE END OF THE LINE
SOJG PT,SLLIMD ;LOOP THROUGH ALL LINES
POP P,CM
POP P,RW
MOVE PT,DISPTR ;DISPLAY SLID-IN STUFF: GET DISPLAY POINTER
EXCH T4,CPL(TM) ; AND NUMBER OF CHARACTERS TO DISPLAY PER LINE
PUSH P,T4 ;SAVE THE REAL LINE SIZE
PUSH P,TM ;SAVE THE TERMINAL FLAGS, TOO
PUSHJ P,CHOME ;MOVE THE CURSOR HOME
PUSHJ P,IMODON ;TURN ON INSERT MODE
TLZ TM,WRP!TBS
MOVE T4,LPP.1 ;GET SCREEN SIZE, MINUS THE BOTTOM LINE
PUSHJ P,DISPS0 ;DO THE DISPLAY
POP P,TM
POP P,CPL(TM) ;RESTORE THE LINE SIZE
PUSHJ P,IMODOF ;TURN OFF INSERT MODE
MOVE T1,SLIDNM
TRNE F,RST ;WANT TO RESTORE THE NOMINAL PARAMETER?
MOVEM T1,SLIDES ;YES - SET IT BACK TO THE DEFAULT
PUSHJ P,FIXBLF ;MAKE SURE THE BOTTOM LINE IS O.K.
JRST DISCUR ;RE-POSITION AND LOOP
>
;HERE TO SLIDE THE VIEWING WINDOW TO THE RIGHT
SLIDER::MOVE T4,SLIDES ;SET UP LAST TIME'S SLIDE AS NOMINAL
MOVEM T4,PARG1
PUSHJ P,PEEL.1 ;READ NEW PARM, IF ANY
MOVE T4,PARG1 ;GET LINES TO ROLL
TRNE F,CMV ;CURSOR MOVEMENT?
MOVE T4,PARG2 ;YES - GET CHANGE IN COLUMNS
MOVEM T4,SLIDES ;SAVE AS NEW NOMINAL
PUSHJ P,ERASPM
TLNE TM,XCI ;INITIALIZING FOR AN EXECUTE?
JRST LOOP ;YES - DONE NOW
SLRNPM::SKIPN SLDFLG ;NEVER WANT TO SLIDE?
JRST LOOP ;RIGHT - DON'T
MOVE T4,SLIDES ;GET DISTANCE TO SLIDE
ADD SL,T4 ;SLIDE TO THE RIGHT
SUB CM,T4 ;KEEP CURSOR IN SAME POSITION IN TEXT
JUMPGE CM,SLREND ;HAS CURSOR GONE OFF THE LEFT?
MOVE CM,LMARGN ;YES - GO TO THE LEFT MARGIN
TLO F,XPC ;CHARACTER POINTER IS NOW BAD
SLREND: MOVE T1,SLIDNM
TRNE F,RST ;WANT TO RESTORE THE NOMINAL PARAMETER?
MOVEM T1,SLIDES ;YES - SET IT BACK TO THE DEFAULT
JRST DISALL ;RE-DISPLAY SCREEN AND LOOP
;**********************************************************************
;HERE TO ROLL FORWARD A GIVEN NUMBER OF PAGES (THE EASY WAY)
ROLFWP::MOVE T4,ROLPGS ;SET UP LAST TIME'S ROLL AS NOMINAL
MOVEM T4,PARG1
PUSHJ P,PEEL.1 ;READ NEW PARM, IF ANY
MOVE T4,PARG1 ;GET LINES TO ROLL
MOVEM T4,ROLPGS ;SAVE AS NEW NOMINAL
PUSHJ P,RESTPM ;ERASE PARAMETER FIRST
TLNE TM,XCI ;INITIALIZING FOR AN EXECUTE?
JRST LOOP ;YES - DONE NOW
RFPNPM::SKIPE T4,ROLPGS ;SET UP LAST TIME'S ROLL AS NOMINAL - ANY?
PUSHJ P,PUSMKS ;YES - PUSH THE DISPLAY PTR ON THE MARKER STACK
IMUL T4,LPP(TM) ;GET NUMBER OF LINES TO ROLL
TLNE TM,WDW ;IN A WINDOW?
SUB T4,ROLPGS ;YES - DO ONE LINE FEWER
MOVEM T4,ROLLS ;SAVE AS PARM TO ROLFW
PUSHJ P,ROLFW ;GO DO THE ROLL
RFPEND: MOVEI T1,1
TRNE F,RST ;WANT TO RESTORE THE NOMINAL PARAMETER?
MOVEM T1,ROLPGS ;YES - SET IT BACK TO ONE
JRST LOOP ;THEN GET ANOTHER COMMAND
;HERE TO ROLL BACKWARD A GIVEN NUMBER OF PAGES (ALSO THE EASY WAY)
ROLBKP::MOVE T4,ROLPGS ;SET UP LAST TIME'S ROLL AS NOMINAL
MOVEM T4,PARG1
PUSHJ P,PEEL.1 ;READ NEW PARM, IF ANY
MOVE T4,PARG1 ;GET LINES TO ROLL
MOVEM T4,ROLPGS ;SAVE AS NEW NOMINAL
PUSHJ P,RESTPM ;ERASE PARAMETER FIRST
TLNE TM,XCI ;INITIALIZING FOR AN EXECUTE?
JRST LOOP ;YES - DONE NOW
RBKNPM::SKIPE T4,ROLPGS ;SET UP LAST TIME'S ROLL AS NOMINAL - ANY?
PUSHJ P,PUSMKS ;YES - PUSH THE DISPLAY PTR ON THE MARKER STACK
IMUL T4,LPP(TM) ;GET NUMBER OF LINES TO ROLL
TLNE TM,WDW ;IN A WINDOW?
SUB T4,ROLPGS ;YES - DO ONE LINE FEWER
MOVEM T4,ROLLS ;SAVE AS PARM TO ROLBK
PUSHJ P,ROLBK ;GO DO THE WORK
JRST RFPEND ;THEN FINISH UP AND GET ANOTHER COMMAND
;HERE TO ROLL FORWARD A GIVEN NUMBER OF LINES
ROLFWL::MOVE T4,ROLLIN ;SET UP LAST TIME'S ROLL AS NOMINAL
MOVEM T4,PARG1
PUSHJ P,PEEL.1 ;READ NEW PARM, IF ANY
JUMPE T1,[TLO F,SCN ;SET FLAG IF WANT SCAN MODE
JRST RFLNP0]
MOVE T4,PARG1 ;GET LINES TO ROLL
MOVEM T4,ROLLIN ;SAVE AS NEW NOMINAL
RFLNP0: PUSHJ P,ERASPM ;ERASE PARAMETER FIRST
TLNE TM,XCI ;INITIALIZING FOR AN EXECUTE?
JRST LOOP ;YES - DONE NOW
RFLNPM::MOVE T4,ROLLIN ;SET UP LAST TIME'S ROLL AS NOMINAL
RFLNP1: MOVEM T4,ROLLS ;SAVE ALSO AS PARM TO ROLFW
PUSHJ P,ROLFW ;GO DO THE ACTUAL ROLLING
TLNN F,SCN ;SCANNING?
JRST RFLEND ;NO - GO FINISH UP
SNOOZE ^D1200 ;YES - SLEEP A BIT
TLNN F,FNC ;IS FENCE ON SCREEN?
JRST RFLNPM ;NO - CONTINUE (UNTIL USER TYPES SOMETHING)
TLZ F,SCN ;YES - TIME TO STOP SCANNING
MOVEI RW,^D15 ;PUT CURSOR NEAR CENTER OF SCREEN
MOVEI CM,^D40
JRST RFLNPM ;AND DO THE LAST ONE
RFLEND: MOVE T1,LINROL
TRNE F,RST ;WANT TO RESTORE THE NOMINAL PARAMETER?
MOVEM T1,ROLLIN ;YES - SET IT BACK TO 1/3 THE SCREEN
JRST LOOP ;AND GO GET ANOTHER COMMAND
;SUBROUTINE TO DO THE ACTUAL ROLLING FORWARD (CALLED BY ROLFWL, ROLFWP)
ROLFW:: JUMPLE T4,POSCUR
TLO F,XPB ;SAY BOTTOM POINTER IS INVALID
PUSHJ P,ADVDPT ;MOVE DISPLAY POINTER FORWARD
MOVE T4,ROLLS ;GET LINES TO ROLL AGAIN
SUB RW,T4 ;ADJUST CURSOR POSITION - IF OFF SCREEN
JUMPL RW,[TLO F,XPL!XPC ;LINE AND CHARACTER POINTERS ARE INVALID
SETZB RW,CM ;PUT CURSOR AT UPPER LEFT
JRST .+1]
TLZE F,FLG ;HIT END OF FILE?
JRST ROLFW2 ;YES - GO REWRITE THE SCREEN
MOVE T1,T4 ;GET FRAGGABLE LINES TO ROLL
TLNN F,FNC!FBL ;IS BOTTOM LINE ON SCREEN BAD?
TLNE TM,NEL ;..
AOJ T1, ;YES - FUDGE THE COUNT ONE HIGHER
SKIPE RUP(TM) ;NO ROLL UP SEQUENCE,
CAML T1,LPP(TM) ; OR WANT TO ROLL MORE THAN A SCREENFUL?
JRST ROLFW3 ;YES - GO REWRITE THE SCREEN
ROLFW0::PUSHJ P,CMVBTM ;MOVE TO BOTTOM LINE
TLNN TM,NEL ;IS BOTTOM LINE FRAGGED SOMEHOW?
TLNE F,FNC!FBL
PUSHJ P,CLRLNA ;YES - ERASE IT
PUSHJ P,ROLLUP ;DO A ROLL
SOJG T4,.-1 ;LOOP THROUGH PROPER NUMBER OF LINES
MOVE T4,LPP(TM) ;POSITION TO START OF LINES TO REWRITE
SUB T4,ROLLS
MOVEM T4,SAVEAC ;SAVE POSITION COUNT
ROLFW1::MOVE PT,DISPTR
TLNN F,FNC!FBL ;IS BOTTOM LINE ON SCREEN BAD?
TLNE TM,NEL ;..
SOJ T4, ;YES - WRITE FROM ONE HIGHER
PUSHJ P,ADVLPT ;ELSE GET POINTER TO START OF NEW STUFF
JUMPL T4,[PUSHJ P,FIXBLW ;IF BEYOND FILE OUTPUT THE FENCE
JRST POSCUR] ;POSITION CURSOR AND RETURN
MOVE T4,SAVEAC ;RESTORE POSITION COUNT
TLNN F,FNC!FBL ;IS BOTTOM LINE ON SCREEN BAD?
TLNE TM,NEL ;..
SOJL T4,ROLFW3 ;YES - WRITE FROM ONE HIGHER - REDISPLAY IF NEG
PUSHJ P,POSLIN ;POSITION CURSOR AT THE LINE
MOVE T4,ROLLS ;DISPLAY THE MISSING LINES
TLZE F,FNC!FBL ;IS BOTTOM LINE ON SCREEN BAD?
AOJ T4, ;YES - WRITE ONE MORE LINE
PUSHJ P,DISPLY ;REWRITE BOTTOM OF THE SCREEN
TRNE F,IMD ;IN INSERT MODE?
PUSHJ P,INSMSG ;YES - PUT MESSAGE UP
JRST POSCUR ;RE-POSITION THE CURSOR AND RETURN
ROLFW2: ADD RW,T4 ;DE-ADJUST CURSOR POSITION (AT EOF)
ROLFW3: PUSHJ P,DISPLL ;RE-DISPLAY SCREEN
JRST POSCUR ;POSITION CURSOR AND RETURN
;HERE TO ROLL BACKWARD A GIVEN NUMBER OF LINES
ROLBKL::MOVE T4,ROLLIN ;SET UP LAST TIME'S ROLL AS NOMINAL
TLNN F,ENT ;IS THERE A PARAMETER TYPED?
JRST RBLNPM ;NO - USE THE ONE ALREADY SET UP
MOVEM T4,PARG1
PUSHJ P,PEEL.1 ;READ NEW PARM, IF ANY
JUMPE T1,[TLO F,SCN ;SET FLAG IF WANT SCAN MODE
MOVE T4,ROLLIN ;GET SIZE OF SCAN
JRST RBLNP0]
MOVE T4,PARG1 ;GET LINES TO ROLL
MOVEM T4,ROLLIN ;SAVE AS NEW NOMINAL
RBLNP0: PUSHJ P,RESTPM ;ERASE PARAMETER
TLNE TM,XCI ;INITIALIZING FOR AN EXECUTE?
JRST LOOP ;YES - DONE NOW
RBLNPM::MOVEM T4,ROLLS ;SAVE ALSO AS PARM TO ROLBK
PUSHJ P,ROLBK ;DO THE ACTUAL WORK
TLNN F,SCN ;SCANNING?
JRST RFLEND ;NO - GO FINISH UP
SNOOZE ^D1200 ;NO - WAIT A BIT
MOVE T4,ROLLIN ;GET SIZE OF ROLL AGAIN
JRST RBLNPM ;AND CONTINUE (UNTIL USER TYPES SOMETHING)
;SUBROUTINE TO ROLL BACKWARDS (CALLED BY ROLBKL AND ROLBKP)
ROLBK: JUMPLE T4,POSCUR ;DONE IF NO ROLL
TLO F,XPB ;SAY BOTTOM POINTER IS INVALID
PUSHJ P,BAKDPT ;MOVE DISPLAY POINTER BACKWARD (T4) LINES
JUMPE T4,ROLBK1 ;HIT START OF FILE?
TLZE F,SCN ;YES - SCANNING?
JRST [MOVEI RW,^D5 ;YES - PUT CURSOR NEAR CENTER OF SCREEN
MOVEI CM,^D40
JRST .+1] ;AND CONTINUE
TRNE F,XCT ;EXECUTING?
JRST XCEERR ;YES - GIVE SPECIAL MESSAGE
ROLBK1: MOVNS T4 ;SUBTRACT FROM LINES ROLLED
ADDB T4,ROLLS ; (BOTH IN ROLLIN AND IN T4)
MOVN T1,T4
JUMPE T4,POSCUR ;IF ALREADY AT START OF BUFFER, QUIT
ADD RW,T4 ;ADJUST CURSOR POSITION
CAMGE RW,LPP(TM) ;WILL CURSOR BE OFF THE SCREEN?
JRST ROLBK2 ;NO - O.K.
SETZB RW,CM ;YES - PUT IT AT UPPER LEFT
TLZ F,FBL ;BOTTOM LINE IS ALL RIGHT
ROLBK2: TLO F,XPL!XPC ;LINE AND CHARACTER POINTERS ARE INVALID
SKIPE RLD(TM) ;NO ROLL DOWN SEQUENCE,
CAML T4,LPP(TM) ; OR WANT TO ROLL MORE THAN A SCREENFUL?
JRST ROLBK3 ;EITHER - JUST REWRITE THE SCREEN
PUSHJ P,CHOME ;NEITHER - HOME THE CURSOR
PUSHJ P,ROLLDN ;ROLL AND CLEAR A LINE
SOJG T4,.-1 ;LOOP THROUGH ALL LINES TO ROLL
MOVE PT,DISPTR ;POINT TO DESIRED POSITION IN BUFFER
MOVE T4,ROLLS ;GET NUMBER OF LINES TO REWRITE
PUSHJ P,DISPLY ;REWRITE THEM
PUSHJ P,FIXBLW ;DISPLAY FENCE OR INSERT MODE MESSAGE
JRST POSCUR ;RE-POSITION THE CURSOR AND RETURN
ROLBK3: PUSHJ P,RESTPM ;ERASE PARAMETER
JRST ROLFW3 ;RE-DO THE SCREEN, RE-POSITION, AND RETURN
;**********************************************************************
;HERE ON RESET (ALIAS RUBOUT) RESETS ENTER MODE, OR RE-WRITES SCREEN
XRESET::PUSHJ P,ERSPM2 ;RESTORE SAVED POSITION
MOVE T2,PARPTR ;DID USER TYPE JUST ENTER RESET?
CAME T2,[POINT 7,PARBUF]
CAMN T2,[010700,,PARBUF-1]
JRST RESET1 ;YES - LEAVE BUFFER ALONE
SETZ T1, ;NO - END PARAMETER BUFFER WITH A NULL
IDPB T1,PARPTR
LDB T1,[POINT 7,PARBUF,6] ;GET 1ST CHARACTER OF PARAMETER
CAIN T1,136 ;UP-ARROW?
JRST DISRES ;YES - GO RE-DISPLAY ENTIRE SCREEN
RESET2: PUSHJ P,ERASPM ;ERASE THE PARAMETER
JRST RESNP1 ;AND JOIN THE FLOW
RESNPM::TLZE F,FBL ;IS THE BOTTOM LINE FRAGGED?
PUSHJ P,FIXBLN ;YES - REPAIR IT
RESNP1: PUSHJ P,POSCUR ;RE-POSITION THE CURSOR
MOVEI T1,77 ;GET EXECUTE CODE FOR RESET
TRNE F,XSV ;SAVING IN AN EXECUTE BUFFER?
DPB T1,XCTPTW ;YES - OVERWRITE REAL CODE WITH EXECUTE CODE
JRST LOOP ;GET ANOTHER COMMAND
RESET1: TRNE F,CMV ;CURSOR MOVE?
JRST RESET2 ;YES - THEN IT'S NOT A TOKEN
TLZE F,XPL ;ELSE RE-DO CURRENT LINE
PUSHJ P,MAKLPT ;RE-MAKE LINE POINTER, IF NEEDED
PUSHJ P,DISONL
JRST RESET2 ;CONTINUE
;**********************************************************************
;HERE ON ENTER-REWRITE - RE-WRITE THE SCREEN WITH THE LINE THE CURSOR
;IS ON AT THE CENTER OF THE SCREEN
;(REWRITE, WITHOUT THE ENTER, JUMPS TO DISALL)
RWRARG::PUSHJ P,RESTPM ;CLEAR THE PARAMETER QUICKLY
MOVE T4,LPP(TM) ;GET THE NUMBER OF LINES ON THE SCREEN
LSH T4,-1 ;DIVIDE IT BY TWO
EXCH T4,RW ;THE CURSOR WILL NOW BE IN THE CENTER ROW
SUB T4,RW ;FIND DIFFERENCE BETWEEN CENTER AND CURSOR
JUMPG T4,RWRTDN ;JUMP IF THE CURSOR IS BELOW THE CENTER
JUMPE T4,DISALL ;JUMP IF THE CURSOR IS ALREADY AT THE CENTER
MOVN T4,T4 ;ELSE GET NUMBER OF LINES TO BACK UP
PUSHJ P,BAKDPT ;BACK UP THE DISPLAY POINTER
SUB RW,T4 ;ADJUST ROW IN CASE START OF FILE WAS REACHED
JRST DISALL ;RE-WRITE THE SCREEN AND LOOP
RWRTDN: PUSHJ P,ADVDPT ;ADVANCE THE DISPLAY POINTER
JRST DISALL ;RE-WRITE THE SCREEN AND LOOP
;**********************************************************************
;HERE TO DO A RECALL COMMAND -
;GIVES BACK PREVIOUS PARAMETER FOR EDITING AND REUSE
;ALSO ENTER F RECALL FORCES BACK THE FILESPECS
;AND ENTER A RECALL THE ALTERNATE FILESPECS
;AND ENTER S RECALL THE SEARCH KEY
;AND ENTER O RECALL THE OLD (PREVIOUS) SEARCH KEY
;AND ENTER R RECALL THE SUBSTITUTE (REPLACE) STRING
RECARG::SETZ T1, ;END PARAMETER BUFFER WITH A NULL
IDPB T1,PARPTR
MOVE PT,[POINT 7,PARBUF]
PUSHJ P,SWHLUR ;READ PARAMETER CHARACTER
CAIGE T1,"A" ;ALPHABETIC?
JRST RECAR1 ;NO - JUST DO A NORMAL RECALL
CAIN T1,"F" ;WANT TO SET UP FILESPECS?
JRST RECFIL ;YES - GO DO IT
CAIN T1,"A" ;WANT TO SET UP ALTERNATE FILESPECS?
JRST RECAFL ;YES - GO DO IT
CAIN T1,"R" ;WANT TO SET UP SUBSTITUTE STRING?
JRST RECSCR ;YES - GO DO IT
CAIN T1,"O" ;WANT TO SET UP OLD SEARCH KEY?
JRST RECSCO ;YES - GO DO IT
CAIE T1,"S" ;WANT TO SET UP THE SEARCH KEY?
JRST RECAR1 ;NO - JUST DO A NORMAL RECALL
SKIPA T1,[SRCKEY,,PARBUF] ;TRANSFER SEARCH KEY ...
RECSCO: MOVE T1,[SROKEY,,PARBUF] ;TRANSFER OLD SEARCH KEY ...
RECSC1: BLT T1,PARBUF+7 ; TO PARAMETER BUFFER
JRST RECAR1 ;CONTINUE TO RECALL THE KEY
RECSCR: MOVE T1,[SUBSTG,,PARBUF] ;TRANSFER SUBSTITUTE STRING
JRST RECSC1
IFN TOPS10,<
RECAFL: SKIPA PT,[POINT 7,OLDSPC] ;POINT TO ASCII ALTERNATE FILE SPECS
RECFIL: MOVE PT,[POINT 7,FILSPC] ;POINT TO ASCII FILE SPECS
MOVE T4,[POINT 7,PARBUF] ;AND PARAMETER BUFFER
ILDB T1,PT ;IF FILESPECS ARE NULL SAY SO
JUMPE T1,RECFL2
ILDB T1,PT ;SKIP OVER THE DEVICE
CAIE T1,":"
JRST .-2
RECFL1: ILDB T1,PT ;THEN COPY NAME AND EXT (BUT NOT PPN)
IDPB T1,T4
CAIE T1,"[" ;IF PPN, FLOW TO SAVE NULLS
JRST RECFL1
>
IFE TOPS10,<
RECFIL: MOVE T1,[FILSPC,,PARBUF] ;TRANSFER FILESPECS TO PARAMETER BUFFER
BLT T1,PARBUF+13 ;AND FALL INTO NORMAL RECALL CODE
JRST RECAR1
RECAFL: MOVE PT,[POINT 7,OLDSPC] ;POINT TO ASCII ALTERNATE FILE SPECS
MOVE T4,[POINT 7,PARBUF] ;AND PARAMETER BUFFER
RECAF1: ILDB T1,PT ;COPY UNTIL NULL OR SWITCHES
IDPB T1,T4
JUMPE T1,RECFL2
CAIE T1,"/"
JRST RECAF1
>
SETZ T1, ;END WITH TWO NULLS
DPB T1,T4
RECFL2: IDPB T1,T4
RECAR1::PUSHJ P,ENTRMK ;MARK THE BOTTOM OF THE SCREEN
JRST RECAL0 ;CONTINUE TO RECALL THE KEY
RECALL::TLO F,ENT ;PRETEND ENTER WAS TYPED
PUSHJ P,ENTER0 ;SET UP LIKE AN ENTER
RECAL0: MOVE T1,[POINT 7,PARBUF]
ILDB T2,T1 ;RE-MAKE THE PARAMETER POINTER
JUMPN T2,.-1 ; TO POINT TO THE FIRST NULL
MOVEM T1,PARPTR
RECAL1::MOVE T1,PARPTR ;GET RID OF NULL AT END OF PARAMETER BUFFER
ADD T1,[70000,,0] ;FUDGE A DECREMENT OF THE PARM POINTER
CAIGE T1,0
SUB T1,[430000,,1]
MOVEM T1,PARPTR
TRNE F,XCT!XBN ;EXECUTING?
JRST LOOP ;YES - DONE NOW
MOVEI T1,PARBUF ;NO - OUTPUT CURRENT PARAMETER
PUSHJ P,PUTSTS
PUSHJ P,PUTTYP ;TYPE IT ALL OUT NOW
JRST LOOP ;LET USER EDIT IT
;**********************************************************************
;HERE FOR THE SEARCH BACKWARD COMMAND
SRCBAK::PUSHJ P,SRGTKY ;SET UP THE NEW SEARCH KEY
SRBNPM::PUSHJ P,MAKCPT ;RE-MAKE CURSOR POINTER
MOVE T1,DISPTR ;GET POINTER TO TOP OF SCREEN
MOVEM T1,SAVEAC ;SAVE IT FOR REFERENCE
MOVE PT,CHRPTR ;GET POINTER TO CURRENT POSITION
MOVE T4,[350700,,SRCKEY] ;AND POINTER TO START OF SEARCH KEY
LDB T1,T4 ;GET THE FIRST KEY CHARACTER
TRNE F,NLC ;WANT CASE INDEPENDENCE?
PUSHJ P,SRCUPP ;YES - CHECK THE CASE
MOVE T3,T1 ;PUT CHARACTER IN THE RIGHT AC
JUMPE T3,SRCBK3 ;ERROR IF NOTHING TO SEARCH FOR
CAIE T3,12 ;ELSE DOES THE KEY START WITH A LINEFEED?
JRST SRCBK3 ;NO - JUMP INTO THE LOOP
CAMN PT,[010700,,BUFFER-1] ;YES - AT START OF FILE YET?
JRST SRCERR ;YES - NOT-FOUND ERROR
LDB T1,PT ;GET THE FIRST FILE CHARACTER
CAIE T1,12 ;IS IT A LINEFEED?
JRST SRCBK3 ;NO - PROCEED
SRCBK1: ADD PT,[70000,,0] ;BACK FILE POINTER UP A NOTCH
CAIGE PT,0
SUB PT,[430000,,1]
SRCBK3: CAMN PT,[010700,,BUFFER-1] ;AT START OF FILE YET?
JRST SRCERR ;YES - NOT-FOUND ERROR
LDB T1,PT ;GET A CHARACTER
CAMN PT,SAVEAC ;BACK TO START OF SCREEN?
PUSHJ P,SRCDKY ;YES - REMIND USER WHAT KEY IS
TRNE F,NLC ;WANT CASE INDEPENDENCE?
PUSHJ P,SRCUPP ;YES - CHECK THE CASE
CAMN T1,T3 ;SAME AS FIRST CHAR OF KEY?
JRST SRCB2A ;YES - CHECK REST OF MATCH
CAIE T3,37 ;GOT A WILD KEY CHARACTER?
JRST SRCBK1 ;NO - KEEP GOING
SRCB2A: MOVEM PT,SRCPTR ;SAVE POINTER TO BUFFER
PUSHJ P,SRCIPT ;DOES THE USER WANT TO INTERRUPT?
JRST SABERR ;YES - STOP THE SEARCH
SRCBK2: ILDB T1,T4 ;GET NEXT CHARACTER OF KEY
JUMPE T1,SRCMAT ;IF NULL, GOT A MATCH
TRNE F,NLC ;WANT CASE INDEPENDENCE?
PUSHJ P,SRCUPP ;YES - CHECK THE CASE
MOVE T2,T1 ;PET CHARACTER IN THE RIGHT AC
ILDB T1,PT ;GET ONE FROM THE BUFFER
JUMPE T1,.-1 ;IGNORE IF NULL
TRNE F,NLC ;WANT CASE INDEPENDENCE?
PUSHJ P,SRCUPP ;YES - CHECK THE CASE
CAME T1,T2 ;SAME?
CAIN T2,37 ; OR KEY CHAR IS WILD?
JRST SRCBK2 ;YES - O.K. SO FAR
MOVE PT,SRCPTR ;NO - NO MATCH - RESTORE BUFFER POINTER
MOVE T4,[350700,,SRCKEY] ;AND POINTER TO START OF SEARCH KEY
JRST SRCBK1 ;AND CONTINUE LOOKING FOR THE ENTIRE KEY
SRCUPP: CAIGE T1,"a" ;LOWER CASE?
POPJ P, ;NO - RETURN
CAIG T1,"z" ;MAYBE - IS IT?
SUBI T1,40 ;YES - CONVERT TO UPPER
POPJ P, ;DONE
;SUBROUTINE TO SEE IF THE USER HAS TYPED A RUBOUT.
;RETURNS +1 IF SO, ELSE +2
SRCIPT::GOTINP ;SKIP IF USER TYPED SOMETHING
JRST SRCIP1 ;NO - SKIP RETURN
GETCHR ;YES - READ THE CHARACTER INTO T1
CAIE T1,177 ;IS IT A RUBOUT?
SRCIP1: AOS (P) ;NO - GIVE SKIP RETURN
POPJ P, ;YES - GIVE +1 RETURN
;SUBROUTINE TO SET UP A NEW SEARCH KEY
SRGTKY: MOVE T1,[SRCKEY,,SROKEY]
BLT T1,SROKEY+7 ;SAVE CURRENT KEY AS PREVIOUS ONE
MOVE T3,[POINT 7,SRCKEY]
PUSHJ P,PELS.1 ;GET SEARCH KEY
MOVEM T1,SRCKLN ;SAVE ITS LENGTH FOR THE SUBSTITUTE COMMAND
PUSHJ P,ERASPM ;ERASE PARAMETER
TLNN TM,XCI ;INITIALIZING FOR AN EXECUTE?
POPJ P, ;NO - RETURN
POP P, ;YES - DONE NOW
JRST LOOP
;HERE FOR THE SEARCH FORWARD COMMAND
SRCFWD::PUSHJ P,SRGTKY ;SET UP THE NEW SEARCH KEY
SRFNPM::PUSHJ P,MAKCPT ;RE-MAKE CURSOR POINTER
CAMN RW,LPP.1 ;IS CURSOR ON THE BOTTOM LINE?
JRST [PUSHJ P,SRCDKY ;YES - SCREEN WILL BE RE-DONE
JRST SRFNP1]
TLZE F,XPB ;GOT A VALID BOTTOM POINTER?
PUSHJ P,MAKBPT ;NO - RE-MAKE IT
MOVE T1,BOTPTR ;GET BOTTOM PTR TO SEE WHEN SRCH IS OFF SCREEN
MOVEM T1,SAVEAC ;SAVE IT FOR REFERENCE
SRFNP1: MOVE PT,CHRPTR ;GET POINTER TO CURRENT POSITION
ILDB T1,PT ;SKIP FIRST REAL CHARACTER
JUMPE T1,.-1 ; AT THIS LOCATION
MOVE T4,[350700,,SRCKEY] ;AND POINTER TO START OF SEARCH KEY
LDB T1,T4 ;GET THE FIRST KEY CHARACTER
TRNE F,NLC ;WANT CASE INDEPENDENCE?
PUSHJ P,SRCUPP ;YES - CHECK THE CASE
SKIPN T3,T1 ;PUT CHARACTER IN THE RIGHT AC - GOT ONE?
JRST SRXERR ;NO - ERROR IF NOTHING TO SEARCH FOR
SRCFW1: CAMN PT,EN ;AT END OF FILE YET?
JRST SRCERR ;YES - NOT-FOUND ERROR
ILDB T1,PT ;ELSE GET A CHARACTER
CAMN PT,SAVEAC ;GOING OFF THE BOTTOM OF THE SCREEN?
PUSHJ P,SRCDKY ;YES - REMIND USER WHAT KEY IS
TRNE F,NLC ;WANT CASE INDEPENDENCE?
PUSHJ P,SRCUPP ;YES - CHECK THE CASE
CAMN T1,T3 ;SAME AS FIRST CHAR OF KEY?
JRST SRCF2A ;YES - CHECK REST OF KEY
CAIE T3,37 ;WILD SEARCH CHARACTER?
JRST SRCFW1 ;NO - KEEP GOING
SRCF2A: MOVEM PT,SRCPTR ;SAVE POINTER TO CURRENT POSITION
PUSHJ P,SRCIPT ;DOES THE USER WANT TO INTERRUPT?
JRST SABERR ;YES - STOP THE SEARCH
SRCFW2: ILDB T1,T4 ;GET NEXT CHARACTER OF KEY
TRNE F,NLC ;WANT CASE INDEPENDENCE?
PUSHJ P,SRCUPP ;YES - CHECK THE CASE
SKIPN T2,T1 ;GET CHARACTER IN THE RIGHT AC - GOT ONE?
JRST SRCMTF ;NO - FOUND THE MATCH
SRCFW3: ILDB T1,PT ;NOW GET ONE FROM THE BUFFER
JUMPE T1,[CAMN PT,EN ;IF NULL, AT END OF FILE?
JRST SRCERR ;YES - NO MATCH
JRST SRCFW3];NO - SKIP THE NULL
TRNE F,NLC ;WANT CASE INDEPENDENCE?
PUSHJ P,SRCUPP ;YES - CHECK THE CASE
CAME T1,T2 ;SAME?
CAIN T2,37 ; OR KEY CHAR IS WILD?
JRST SRCFW2 ;YES - O.K. SO FAR
MOVE PT,SRCPTR ;NO - NO MATCH - RESTORE BUFFER POINTER
MOVE T4,[350700,,SRCKEY] ;AND POINTER TO START OF SEARCH KEY
JRST SRCFW1 ;AND CONTINUE LOOKING FOR THE ENTIRE KEY
;SUBROUTINE FOR WHEN THE SEARCH HAS GONE BEYOND THE LIMITS OF THE SCREEN
;DISPLAY SEARCH KEY ON BOTTOM LINE AND SET SAVEAC TO 0
;(THUS SAVEAC/0 IF MATCH NOT ON SCREEN, ELSE NONZERO). FRAGS T1 ONLY.
SRCDKY: SETZM SAVEAC ;CLEAR ON-SCREEN INDICATOR
TRNE F,XCT ;EXECUTING?
JRST SRCDK1 ;YES - DON'T DISPLAY
MOVEI T1,[ASCIZ /SEARCH FOR: /]
PUSHJ P,PUTBTM ;DISPLAY SEARCH KEY ON BOTTOM OF SCREEN
MOVEI T1,SRCKEY
PUSHJ P,PUTSTC
PUSHJ P,PROTOF ;TURN PROTECTION OFF
JRST PUTTYP ;OUTPUT ALL THIS AND RETURN
SRCDK1: CAIN DO,$SUBST ;DOING A SUBSTITUTE?
SKIPE SAVEAC+1 ;YES - FIRST TIME THROUGH HERE?
POPJ P, ;NO - ONCE IS ENOUGH
MOVEI T1,[ASCIZ /SEARCH FOR: /]
PUSHJ P,PUTBTM ;DISPLAY SUBSTITUTE ON BOTTOM OF SCREEN
MOVEI T1,SRCKEY
PUSHJ P,PUTSTC
MOVEI T1,[ASCIZ / SUBSTITUTE: /]
PUSHJ P,PUTSTG
MOVEI T1,SUBSTG
PUSHJ P,PUTSTC
PUSHJ P,PROTOF ;TURN PROTECTION OFF
JRST PUTTYF ;FORCE ALL THIS OUT AND RETURN
;HERE WHEN A SEARCHER HAS FOUND A MATCH - DISPLAY A FEW LINES BEFORE MATCH
SRCMTF: TLNE F,FNC ;IF SEARCHING FORWARD, IS FENCE ON SCREEN?
SETOM SAVEAC ;YES - MATCH MUST BE, TOO
SRCMAT: MOVE PT,SRCPTR ;RESTORE POINTER TO START OF MATCH
CAIN DO,$SUBST ;DOING A SUBSTITUTE?
JRST SRCMT0 ;YES - DON'T FUDGE THE LINEFEED, THEN
LDB T1,PT ;GET FIRST CHARACTER OF MATCH
CAIN T1,12 ;LINEFEED?
IBP PT ;YES - POINT TO FIRST CHARACTER
MOVEM PT,SRCPTR ;SAVE ADJUSTED POINTER
SRCMT0: SKIPN SAVEAC ;IS MATCH ON SCREEN?
JRST SRCMT1 ;NO - GO RE-DISPLAY
;HERE IF MATCH IS ON SCREEN - JUST POSITION CURSOR AT MATCH
ADD PT,[70000,,0] ;BACK IT UP A NOTCH
CAIGE PT,0
SUB PT,[430000,,1]
MOVEM PT,CHRPTR ;CHARACTER POSITION WILL BE START OF THE MATCH
PUSHJ P,CALCRW ;CALCULATE PROPER VALUE OF RW
PUSHJ P,CALCML ;CALCULATE PROPER VALUE OF CM
PUSHJ P,DISPLL ;RE-DISPLAY IF THERE WAS A SLIDE
TLZ F,XPL!XPC ;LINE AND CURSOR POINTERS ARE GOOD
CAIE DO,$SUBST ;DOING A SUBSTITUTE?
JRST DISCUR ;NO - POSITION CURSOR TO START OF MATCH; LOOP
POPJ P, ;YES - RETURN
;HERE IF MATCH IS NOT ON THE SCREEN
SRCMT1: CAIN DO,$SUBST ;DOING A SUBSTITUTE?
JRST SRCST0 ;YES - SET POINTERS AND RETURN
PUSHJ P,PUSMKS ;NO - PUSH THE DISPLAY PTR ON THE MARKER STACK
PUSHJ P,SRCSET ;SET UP THE RIGHT POINTERS
JRST DISALL ;RE-DISPLAY THE SCREEN AND LOOP
SRCST0: SETOM SAVEAC+1 ;SAY THE DISPLAY HAS MOVED OVER THE FILE
SRCSET: MOVE T4,LINROL ;BACK UP ONE ROLL'S WORTH
AOJ T4,
MOVEM PT,DISPTR ;FROM THE MATCH
ADD PT,[70000,,0] ;BACK IT UP A NOTCH
CAIGE PT,0
SUB PT,[430000,,1]
MOVEM PT,CHRPTR ;CHARACTER POSITION WILL BE START OF THE MATCH
PUSHJ P,BAKDPT
MOVE RW,LINROL ;POINT TO START OF LINE WITH MATCH
SUB RW,T4 ; (WHICH MAY NOT BE THE FULL DISTANCE DOWN)
PUSHJ P,MAKLPT ;MAKE LINE PTR (IN LINPTR AND PT)
PUSHJ P,CALCCM
TLZA F,XPL!XPC!FBL ;ROW AND COLUMN POINTERS ARE RIGHT
TLZ F,XPL!XPC!FBL ; AND BOTTOM LINE IS GOOD, TOO
TLO F,XPB ;BUT BOTTOM POINTER IS NOT GOOD
POPJ P,
SABERR: SKIPA T1,[[ASCIZ /##########Search aborted/]]
SRXERR: MOVEI T1,[ASCIZ /#######Nothing to search for/]
JRST ERROR
SRCERR: MOVEI T1,[ASCIZ /##########Search failure/]
TRNN F,XBN!XCT ;EXECUTING?
JRST ERROR ;NO - REPORT THE ERROR
ILDB T2,XCTPTR ;YES - GET THE NEXT EXECUTE COMMAND
CAIE T2,"^" ;SPECIAL CHARACTER FLAG?
JRST ERROR ;NO - IT'S STILL AN ERROR
ILDB T1,XCTPTR ;YES - IS IT THE ON-SEARCH-ERROR CONSTRUCT
CAIE T1,21
JRST ERROR ;NO - IT'S STILL AN ERROR
JRST LOOP ;YES - CONTINUE PROCESSING COMMANDS
;**********************************************************************
;HERE TO ENTER A PARAMETER TO A COMMAND
ENTERA::TLOE F,ENT ;SAY ENTER TYPED - WAS IT ALREADY?
JRST ENTHLP ;YES - MAYBE GIVE SOME HELP
MOVE T1,[POINT 7,PARBUF] ;POINT TO START OF PARAMETER BUFFER
MOVEM T1,PARPTR
DMOVEM RW,SAVPOS ;SAVE POSITION, IN CASE OF CURSOR MOVE
PUSHJ P,MRKCUR ;MARK THE CURRENT CURSOR POSITION
TLO F,FBL ;NOTE THAT BOTTOM LINE IS FRAGGED
ENTERM::PUSHJ P,ENTRMK ;NO - MAKE THE MARK ON THE BOTTOM LINE
PUSHJ P,PUTTYP ;DISPLAY IT NOW
JRST LOOP ;AND GO GET A NEW COMMAND
ENTER0: DMOVEM RW,SAVPOS ;SAVE POSITION, IN CASE OF CURSOR MOVE
PUSHJ P,MRKCUR ;MARK THE CURRENT CURSOR POSITION
TLO F,FBL ;NOTE THAT BOTTOM LINE IS FRAGGED
ENTRMK::TRNE F,XCT!XBN ;EXECUTING?
POPJ P, ;YES - DO NOTHING
PUSHJ P,CBOTOM ;MOVE TO BOTTOM OF SCREEN
ENTMK1: PUSHJ P,PROTON ;TURN HIGHLIGHTING ON
MOVEI T1,76 ;PUT UP ENTER MARK
IDPB T1,TY
JRST PROTOF ;TURN OFF HIGHLIGHTING AND RETURN
;SUBROUTINE TO MARK CURRENT CURSOR POSITION
;NOTE: EXPECTS CALLER TO CALL PUTTYP TO OUTPUT ALL THIS
MRKCUR::PUSHJ P,MAKCPT ;MAKE MARK AT CURSOR POSITION - MAKE POINTER
MOVE T2,CHRPTR ;GET CURSOR POINTER
MOVEM T2,SAVCPT ;SAVE FOR AFTER ENTER
TRNE F,XCT!XBN ;EXECUTING?
POPJ P, ;YES - DONE NOW
CAIGE T3," " ;POINTING TO A CONTROL CHARACTER?
JRST [CAIE T3,15 ;YES - GOT A <CR>,
CAIN T3,12 ; OR A LINEFEED?
MOVEI T3," " ;YES - USE A SPACE INSTEAD
CAIN T3,11 ;HOW EABOUT A TAB?
MOVEI T3," " ;YES - USE A SPACE INSTEAD
JRST .+1]
MOVEM T3,CHRCUR ;SAVE CHARACTER FOR LATER
TLNE TM,MRK ;WANT TO PUT UP A SPECIAL MARK?
JRST [MOVE T1,MAR(TM) ;YES - GET THE MARK
IDPB T1,TY ;SAVE IT
POPJ P,] ;AND DISPLAY IT
CAIGE T3," " ;GOT A CONTROL CHARACTER?
POPJ P, ;YES - IT'S ALREADY REVERSED
PUSHJ P,PROTON ;TURN PROTECTION ON
IDPB T3,TY
JRST PROTOF ;TURN OFF PROTECTION AND RETURN
;HERE ON ENTER ENTER. IF A PARAMETER WAS TYPED, SAVE A 177 CHARACTER
;ELSE PREPARE TO GIVE HELP (UNLESS NO HELP [NHP] FLAG IS SET)
ENTHLP::MOVE T1,[POINT 7,PARBUF]
TRNN F,NHP!CMV ;REALLY DON'T WANT HELP, DOING CURSOR MOVEMENT,
CAME T1,PARPTR ; OR HAS PART OF A PARAMETER BEEN TYPED?
JRST ENTHLD ;EITHER - SAVE A DELIMITER CHARACTER
HELPR0: MOVEI DO,1000 ;NEITHER - NOTE THAT HELP IS BEING GIVEN
ENTHL0: PUSHJ P,PROTON ;SAY HELP IS ON THE WAY
MOVEI T1,[ASCIZ /Type any command to get help for it /]
PUSHJ P,PUTSTG
ENTH0A: MOVEI T1,[ASCIZ /(or G to get out): /]
PUSHJ P,PUTSTG
PUSHJ P,PROTOF
PUSHJ P,PUTTYP ;TYPE OUT THE MESSAGE
TLO F,FBL ;BOTTOM LINE IS FRAGGED
IFE TOPS10,<
IFN FTECHO,<
PUSHJ P,EKOALL ;ECHO ON; BREAK ON EVERYTHING
>>
GETCHR ;READ A CHARACTER FROM THE TERMINAL IN T1
CAIE T1,"G" ;GOT A "G"?
CAIN T1,"g"
JRST ENTHLE ;YES - END OF HELP
CAIL T1," " ;SOME CONTROL CHARACTER?
JRST HLPERR ;NO - CAN'T GIVE HELP
ENTHL2: ADD T1,ITB(TM) ;GET OFFSET IN TERMINAL TABLE
SKIPL T1,(T1) ;IS IT A NORMAL COMMAND?
JRST ENHL2A ;YES - CONTINUE
PUSHJ P,SUBTAB ;NO - READ MORE CHARACTERS
JRST HLPERR ;ILLEGAL - TRY AGAIN
ENHL2A: TLNE TM,LSD ;ARE LINEFEED AND CURSOR-DOWN ALIKE?
JRST [CAIN T1,12 ;YES - GOT A LINEFEED?
MOVEI T1,34 ;YES - IT'S REALLY A CURSOR-DOWN
JRST .+1]
ENTHL3: TRNE T1,200000 ;IS THE COMMAND AN EXECUTE BUFFER POINTER?
PUSHJ P,HLPXCT ;YES - FIND WHICH COMMAND IT IS, IF IT IS
TLZ F,ENT ;SAY NO LONGER ENTERING A PARAMETER
IFE NEWTAB,<
CAIN T1,"K"-100 ;CONVERT OLD TABLE'S COMMANDS
JRST [MOVEI T1,"V"-100
JRST ENTHLO]
CAIN T1,"L"-100
MOVEI T1,"K"-100
CAIN T1,"U"-100
MOVEI T1,"L"-100
CAIN T1,"N"-100
MOVEI T1,"U"-100
CAIN T1,"V"-100
MOVEI T1,"N"-100
ENTHLO:
>
MOVE PT,T1 ;SAVE INDEX OF COMMAND TO HELP WITH
CAIN PT,$HELP ;IS THIS THE HELP COMMAND?
TDZA PT,PT ;YES - FUDGE AN INDEX OF ZERO
ADDI PT,4 ;NO - FUDGE IN AN EXTRA PAGE
IFN TOPS10,<
MOVSI T2,'HLP' ;LOOK FOR THE HELP FILE ON THE HELP DEVICE
MOVEM T2,GENBLK+1
>
IFE TOPS10,<
CAIN T1,15 ;GOT A CARRIAGE RETURN?
PBIN ;YES - BURN THE LINEFEED THAT FOLLOWS IT
>
HRROI T2,HLPFIL
PUSHJ P,SETINP ;SET UP HELP FILE
JUMPE T1,NHPERR ;IF NOT THERE, SCREAM
PUSHJ P,PIKFRG ;SAVE PICK BUFFER IF IT'S ABOUT TO BE FRAGGED
IFN TOPS10,<
USETI 5,1(PT) ;READ BLOCK THAT COMMAND IS IN
INPUT 5,HLPCCL ;READ IT INTO THE END OF THE PICK BUFFER
PUSHJ P,CLRALL ;GO HOME AND CLEAR SCREEN
PUSHJ P,PUTTYP ;(NOW)
PUSHJ P,ENTHO1 ;OUTPUT THE HELP
JUMPE PT,[INPUT 5,HLPCCL ;IF THE COMMAND IS HELP HELP
PUSHJ P,ENTHO1 ;OUTPUT THE NEXT THREE PIECES OF THE HELP
INPUT 5,HLPCCL
PUSHJ P,ENTHO1
INPUT 5,HLPCCL
PUSHJ P,ENTHO1
JRST .+1]
RELEAS 5, ;GET RID OF SEDONL.HLP
>
IFE TOPS10,<
PUSH P,T1 ;SAVE JFN
MOVE T1,PT ;CONVERT COMMAND TO PAGE AND POSITION
SETZ T2,
LSHC T1,-2
ROT T2,2
MOVE PT,T2 ;SAVE POSITION IN PAGE
LSH PT,7
HRL T1,(P) ;READ IN THE RIGHT FILE BLOCK
MOVE T2,[400000,,777]
MOVE T3,[PM%CNT+PM%RD+1]
PMAP
PUSHJ P,CLRALL ;GO HOME AND CLEAR SCREEN
PUSHJ P,PUTTYP ;(NOW)
MOVEI T1,777000 ;OUTPUT THE HELP
ADD T1,PT
PSOUT
SETO T1, ;UN-MAP THE BLOCK
MOVE T2,[400000,,777]
MOVE T3,[PM%CNT+1]
PMAP
POP P,T1 ;GET JFN AGAIN
CLOSF ;CLOSE THE FILE
HALTF
>
PUSHJ P,CBOTOM
JRST ENTHL0 ;LOOP TO GET NEW OPTION
ENTHLE:
IFE TOPS10,<
IFN FTECHO,<
PUSHJ P,EKONPT ;ECHO OFF; BREAK ON NON-PRINTING CHARACTERS
>>
TLNN F,ENT ;HAS HELP BEEN GIVEN?
JRST DISALL ;NO - REDISPLAY THE ENTIRE SCREEN
PUSHJ P,ERASPM ;YES - JUST FIX BOTTOM LINE
JRST DISCUR ;RE-POSITION CURSOR, AND LOOP
HLPERR: CAIN T1,177 ;RUBOUT?
JRST [SETO T1, ;YES - GIVE HELP AFTER ALL
JRST ENTHL2]
MOVEI T1,[ASCIZ /Illegal command. Try again /]
HLPER1: PUSHJ P,PUTBTM ;OUTPUT MESSAGE
JRST ENTH0A ;AND TRY AGAIN
IFN TOPS10,<
;SUBROUTINE TO OUTPUT THE HELP TEXT
ENTHO1:
IFE FTNIHO,<
OUTSTR PIKBUF+PCBSIZ-200 ;OUTPUT THE HELP
POPJ P, ;DONE
>
IFN FTNIHO,<
MOVE T0,[POINT 7,PIKBUF+PCBSIZ-200]
JRST PUTTYH ;OUTPUT HELP THE HARD WAY AND RETURN
>>
;HERE IF THE COMMAND IS REALLY AN EXECUTE BUFFER - GIVE HELP IF IT'S ONE
;COMMAND LONG, ELSE ERROR
HLPXCT: ANDI T1,77 ;KEEP ONLY GOOD INDEX BITS
MOVE T2,XCTADR(T1) ;GET POINTER TO THIS BUFFER
ILDB T1,T2 ;GET FIRST CHARACTER FROM BUFFER
JUMPE T1,HLXERR ;ERROR IF NULL
CAIN T1,"^" ;SPECIAL CHARACTER FLAG?
JRST [ILDB T1,T2 ;GET COMMAND FROM EXECUTE BUFFER
CAIG T1,37 ;IS IT A REAL COMMAND?
JRST HLXERR ;NO (AN EXECUTE CONSTRUCT) - CAN'T HELP
CAIN T1,77 ;YES - IS IT RESET?
MOVEI T1,$RESET ;YES - SET UP THE REAL INDEX
JRST .+1]
ILDB T0,T2 ;GET NEXT COMMAND
JUMPE T0,CPOPJ ;IF THERE'S ONLY ONE COMMAND GO USE IT
HLXERR: MOVEI T1,[ASCIZ /Can't help with an execute buffer. Try again /]
JRST HLPER1 ;OUTPUT THE MESSAGE AND ASK FOR MORE HELP
NHPERR: MOVEI T1,[ASCIZ /########No help file. Sorry./]
JRST ERROR
;HERE TO SAVE A DELIMITER CHARACTER (177) IN THE PARAMETER BUFFER
;(USER TYPED ENTER WITHIN A PARAMETER)
;DELIMITER IS IGNORED WHILE PARSING UNLESS THE COMMAND IS SUBSTITUTE
ENTHLD: CAME T1,PARPTR ;HAS ANYTHING BEEN TYPED,
TRNE F,CMV ; OR DOING CURSOR MOVEMENT?
JRST LOOP ;YES - NOTHING TO DO
MOVEI T2,177 ;GET THE DELIMITER CHARACTER
LDB T1,PARPTR ;GET LATEST PARAMETER CHARACTER TYPED
CAIN T1,177 ;IS IT A DELIMITER?
JRST LOOP ;YES - DON'T ALLOW IT TWICE IN A ROW
IDPB T2,PARPTR ;NO - SAVE THE DELIMITER
PUSHJ P,ENTMK1 ;PUT IN ANOTHER MARK
PUSHJ P,PUTTYP ;TYPE IT OUT AND GET A NEW COMMAND
JRST LOOP
;SUBROUTINE TO SEE IF PICK BUFFER WILL BE FRAGGED, AND SAVE IT IF SO
;PRESERVES T1
;@@ well, for now it just invalidates the buffer
PIKFRG::TRNN F,POV ;IS PICK BUFFER SAFELY ON DISK,
SKIPN T2,PIKCNT ; OR IS IT NOT LOADED?
POPJ P, ;NOT LOADED OR ON DISK - O.K.
CAIL T2,(5*(PCBSIZ-400)) ;WILL TAIL OF BUFFER GET FRAGGED?
SETZM PIKCNT ;YES - PRETEND PICK BUFFER IS EMPTY
MOVE T2,[POINT 7,PIKBUF]
SKIPE APPFLG ;APPENDING TO THE PICK BUFFER?
MOVEM T2,APPFLG ;YES - WIPE WHAT'S ALREADY THERE
POPJ P, ;DONE
;**********************************************************************
;GIVE HELP
HELPER::TRNE F,NHP ;REALLY WANT HELP?
JRST LOOP ;NO - DO NOTHING
PUSHJ P,CBOTOM ;MOVE TO BOTTOM OF SCREEN
PUSHJ P,PROTON ;TURN PROTECTION ON
TLON F,ENT ;PRETEND ENTER WAS TYPED - WAS IT?
SETZM CHRCUR ;NO - THERE'S NO CHARACTER TO DE-BLIP
JRST HELPR0 ;JUMP INTO ENTER-ENTER CODE (NEAR ENTHLP)
;**********************************************************************
;HERE TO HANDLE AN EXIT COMMAND
EXIPAR::TLO F,FLG ;SET FLAG TO DO A RUN ON COMPIL
EEXIT:: TLZE TM,WDW ;WINDOWING?
PUSHJ P,WNCLST ;YES - STOP
IFN TOPS10,<
RELEAS 1, ;GET RID OF THE TERMINAL
MOVEI PT,FILBLK ;POINT TO NAME OF CURRENT FILE
>
MOVEI T4,FILSPC
SKIPE INJFN ;IS THERE A JFN?
PUSHJ P,SAVFIL ;YES - SAVE THE FILE
IFN FTJOUR,<
TLZN TM,JRW ;WRITING A JOURNAL?
JRST EEXIT1 ;NO - SKIP THIS
IFN TOPS10,<
MOVEI T1,.FODLT ;YES - DELETE THE JOURNAL FILE
HRRM T1,JRNFIL+.FOFNC
MOVE T1,[6,,JRNFIL]
FILOP. T1, ;DELETE IT
JFCL ;IGNORE ANY ERROR
>
IFE TOPS10,<
TRZ F,GFL ;NOTE THAT FILE IS NOT AROUND ANY MORE
MOVE T1,JRNJFN ;GET THE JOURNAL'S JFN
DELF
JFCL ;IGNORE ANY ERROR
>
EEXIT1:
>
SKIPE FILSPC ;GOT A CURRENT FILE?
JRST EEXIT2 ;YES - CONTINUE
SKIPN OLDSPC ;NO - GOT AN OLD FILE?
JRST ABORT ;NEITHER - DON'T WRITE nnnSED.TMP
EEXIT2: MOVE TY,[POINT 7,PIKBUF+PCBSIZ-400]
MOVEI T1,FILSPC ;GET CURRENT FILE SPECS
MOVE T4,DISPTR ;AND DISPLAY POINTER
PUSHJ P,EXIFIL ;OUTPUT THE STATUS OF THE ACTIVE FILE
SKIPN OLDSPC ;IS THERE AN ALTERNATE FILE?
JRST EEXIT0 ;NO - DON'T OUTPUT ITS STATUS
EXCH F,SAVEFG ;GET THE ALTERNATE FILE'S FLAGS
MOVEI T1,OLDSPC ;GET ALTERNATE FILE SPECS
MOVE T4,SAVEDP ;AND DISPLAY POINTER
HRRZ RW,SAVERW
HLRZ CM,SAVERW
MOVE SL,SAVESL
PUSHJ P,EXIFIL ;OUTPUT THE STATUS OF THE ALTERNATE FILE
EXCH F,SAVEFG ;GET THE CURRENT FLAGS (IN CASE OF REENTER)
EEXIT0: SETZ T1, ;MAKE SURE LAST WORD IS NULL
IDPB T1,TY
IDPB T1,TY
IDPB T1,TY
IDPB T1,TY
IDPB T1,TY
HRRZS TY ;FIND SIZE OF STUFF TO OUTPUT
SUBI TY,PIKBUF+PCBSIZ-400
IFN TOPS10,<
MOVN TY,TY ;NEGATE THE NUMBER OF WORDS
IFN FTTMPC,<
HRLM TY,TMPBLK+1 ;SET UP NEGATIVE THE NUMBER OF WORDS TO WRITE
MOVE T1,[3,,TMPBLK] ;TRY TO SAVE IN TMPCOR
TMPCOR T1,
CAIA ;FAILED - SAVE ON DISK
JRST ABORT1-1 ;O.K. - CONTINUE
>
SKIPE T1,SAVSED ;HAS STAT FILE NAME BEEN DIDDLED?
JRST [MOVEM T1,SEDFIL ;YES - SAVE REAL NAME
MOVSI T1,'TMP' ;PUT EXTENSION IN, TOO
MOVEM T1,SEDFIL+1
JRST .+1] ;CONTINUE
HRROI T2,SEDFIL ;SET UP nnnSED.TMP FILE FOR OUTPUT
PUSHJ P,SETOUT
HRLM TY,SEDCCL ;SAVE NEGATIVE WORDCOUNT IN COMMAND BLOCK
OUTPUT 5,SEDCCL ;OUTPUT THE STATUS STUFF
RELEAS 5, ;MAKE IT SOUP (YET)
MOVE TY,TYPPTR
ABORT1: MOVEI T1,1 ;SET UP TTY PAGE
MOVEM T1,PAGADR+2
MOVE T1,[XWD 3,PAGADR]
TRMOP. T1,
HALT
SKIPE CRWADR+2 ;SHOULD TERMINAL BE TTY CRLF?
JRST ABRT1A ;NO - LEAVE IT ALONE
MOVE T1,[XWD 3,CRWADR]
TRMOP. T1, ;ELSE SET TTY CRLF
HALT
ABRT1A:
IFN FTSFD,<
SOS DEFPTH ;SET USER'S STARTING PATH BACK UP
MOVE T1,[SFDLVL+4,,DEFPTH]
PATH. T1,
JFCL
SETOM DEFPTH
>
PUSHJ P,@RTX(TM) ;CALL USER'S EXIT ROUTINE
MOVE T1,[5,,SAVEAC] ;SAVE ACS IN CASE OF REENTER
BLT T1,SAVEAC+12
MOVEI T1,REEERR ;SET UP RE-ENTRY ADDRESS
MOVEM T1,.JBREN
TLZE F,FLG ;WANT TO EXIT AND GO?
JRST EXITGO ;YES
EXIT 1,
JRST REEERR ;IS HE CONTINUES, REENTER
EXITGO: MOVE T1,[1,,GOBLK] ;CODE TO RUN COMPIL
RUN T1, ;LET COMPIL TAKE OVER
JRST REEERR ;IF HE CONTINUES, REENTER
>
IFE TOPS10,<
SKIPE T1,SAVSED ;HAS STAT FILE NAME BEEN DIDDLED?
JRST [MOVE T2,[ASCII /D.TMP/]
DMOVEM T1,SEDFIL ;YES - SET UP REAL NAME AGAIN
SETZM SEDFIL+2
JRST .+1] ;CONTINUE
HRROI T2,SEDFIL ;SET UP nnnSED.TMP FILE FOR OUTPUT
PUSHJ P,SETOUT
MOVE T2,[POINT 7,PIKBUF+PCBSIZ-400]
SETZ T3,
SOUT ;WRITE OUT THE STATUS
PUSHJ P,SETTMP ;MAKE THE FILE TEMPORARY AND CLOSE IT
MOVE TY,TYPPTR
ABORT1: MOVEI T1,.PRIIN
MOVE T2,FMDSAV ;GET BACK THE ORIGINAL FMOD WORD
SFMOD
STPAR
IFN FTECHO,<
MOVEI T3,SAVWKU ;RESTORE THE STARTING WAKE-UP SET
PUSHJ P,BRKSET
>
PUSHJ P,@RTX(TM) ;CALL USER'S EXIT ROUTINE
IFN FTECHO,<
MOVE T1,TTYJFN ;CLOSE THE TTY
CLOSF
JFCL
>
MOVE T1,[5,,SAVEAC] ;SAVE ACS IN CASE OF REENTER
BLT T1,SAVEAC+12
MOVEI T1,REEERR ;SET UP RE-ENTRY ADDRESS
HRRM T1,ENTVEC+1 ;SAVE REAL RE-ENTRY ADDRESS IN ENTRY VECTOR
MOVEI T1,-5 ;RE-ENABLE MONITOR INTERRUPTS
SETO T2,
STIW
SETZM ITTFLG ;SAY INTERRUPTS HAVE BEEN RE-ENABLED
MOVEI T1,-1 ;RESTORE THE CCOC WORDS
DMOVE T2,SAVCOC
SFCOC
TLZN F,FLG ;WANT TO EXIT AND GO?
JRST ABORT2 ;NO - JUST QUIT
HLRZ T1,GOBLK ;IS FILE AN ASCII NAME?
JUMPN T1,ABORT3 ;YES - RUN THE PROGRAM, NOT COMPIL
MOVE T1,[.PRAST,,.FHSLF]
MOVEI T2,GOBLK ;YES - SET UP BUFFER ADDRESS
MOVEI T3,3 ;SIZE OF ARG
PRARG ;TELL EXEC TO DO A LOAD CLASS COMMAND
ABORT2: HALTF
JRST REEERR ;IS HE CONTINUES, REENTER
;HERE TO RUN THE PROGRAM IN GOBLK ON AN INFERIOR FORK.
ABORT3: HRROI T2,GOBLK ;CREATE A FORK AND RUN THE USER'S PROGRAM
PUSHJ P,RUNFRK
KFORK ;WHEN IT EXITS, KILL THE FORK
HALTF ;AND EXIT SED, TOO
JRST REEERR ;IS HE CONTINUES, REENTER
>
;HERE ON THE ABORT COMMAND - SAVE STATUS, ALLOW FOR A RE-ENTER
;AND EXIT WITHOUT SAVING THE FILE
ABOPAR::TLO F,FLG ;SET FLAG TO DO A RUN ON COMPIL
ABORT:: TLZE TM,WDW ;WINDOWING?
PUSHJ P,WNCLST ;YES - STOP
MOVEI T4,FILSPC ;TELL USER THAT FILE IS NOT CHANGED
PUSHJ P,SAVMGN
IFN TOPS10,<
CLRBFI ;MAKE SURE USER'S BUFFER IS EMPTY
>
IFN FTJOUR,<
IFE TOPS10,<
TLZN TM,JRW ;WRITING A JOURNAL?
JRST ABORT1 ;NO - SKIP THIS
MOVE T1,JRNJFN ;RELEASE THE JOURNAL'S JFN
RLJFN
JFCL ;IGNORE ANY ERROR
>>
JRST ABORT1 ;THEN GO FINISH OFF
;SUBROUTINE TO OUTPUT A FILESPEC STATUS LINE.
;ENTER WITH T1/ADDR FILESPEC, T4/DISPTR; ALSO RW, CM, SL SET UP
;USES T0, T1, T2, T3
EXIFIL::PUSHJ P,PUTSTG ;PUT FILESPECS IN BUFFER
JUMPE T4,EXIFL1 ;IF DISPLAY PTR ZERO, JUST END LINE
HRRZ T2,T4 ;GET DISPLAY POINTER
SUBI T2,BUFFER ;CONVERT TO CHARACTER POSITION
IMULI T2,5
HLRZ T0,T4 ;FIND CHARACTERS IN LAST WORD, TOO
SETZ T1,
CAME T0,PTRTBL(T1)
AOJA T1,.-1
ADD T2,T1
MOVE T1,[ASCII ?/FD:?]
PUSHJ P,EXINUM ;ALWAYS OUTPUT DISPLAY POINTER
TRNE F,RDO ;IS THE FILE READ-ONLY?
SKIPA T1,[ASCII ?/READ?]
MOVE T1,[ASCII ?/WRI?]
PUSHJ P,PUTSQ1 ;MARK THE FILE READ-ONLY OR WRITEABLE
MOVE T1,[ASCII ?/FR:?]
SKIPE T2,RW ;IS ROW ZERO?
PUSHJ P,EXINUM ;NO - OUTPUT IT
SKIPE T2,CM ;IS COLUMN ZERO?
PUSHJ P,EXICOL ;NO - OUTPUT IT
SKIPE T2,SL ;IS SLIDE ZERO?
PUSHJ P,EXISLI ;NO - OUTPUT IT
EXIFL1::MOVEI T1,15 ;END THE LINE WITH A CARRIAGE RETURN
IDPB T1,TY
MOVEI T1,12
IDPB T1,TY
POPJ P, ;DONE
EXISLI: SKIPA T1,[ASCII ?/FS:?]
EXICOL: MOVE T1,[ASCII ?/FC:?]
EXINUM: PUSHJ P,PUTSQ1 ;OUTPUT THE SWITCH NAME (IN T1)
MOVE T1,T2 ;GET THE VALUE
JRST PUTNUM ;OUTPUT IT AND RETURN
;**********************************************************************
;HERE FOR THE MARKER COMMAND
;SETS AND GOES TO MARKERS OF THE GIVEN NAME AT THE SCREEN POSITION;
;KILLS SOME OR ALL MARKERS; LISTS THE MARKER NAMES
;ALSO POPS, OR MOVES FORWARD IN, THE MARKER STACK
MARNPM::MOVE T1,DISPTR ;SAVE THE MARKED DISPLAY POINTER
MOVEM T1,MRKPTB-1 ;AS THE DEFAULT MARKER
JRST LOOP ;AND GO GET A NEW COMMAND
MARKER::TRZE F,CMV ;DID USER USE CURSOR MOVEMENT?
JRST SUMERR ;YES - ERROR
SETZ T4, ;END BUFFER WITH A NULL
IDPB T4,PARPTR
LDB T1,[POINT 7,PARBUF,6] ;GET FIRST CHARACTER OF PARAMETER
JUMPE T1,MRKDGO ;IF TOKEN FORMAT, GO TO THE DEFAULT MARKER
ANDI T1,137 ;IF IT'S LOWER CASE, MAKE IT UPPER
CAIN T1,"S" ;SET A MARKER?
JRST MARKST ;YES - DO IT
CAIN T1,"G" ;GO TO A MARKER?
JRST MARKGO ;YES - DO IT
CAIN T1,"K" ;KILL A MARKER?
JRST MARKKL ;YES - DO IT
CAIN T1,"N" ;DISPLAY THE MARKER NAMES?
JRST MARKNM ;YES - DO IT
CAIN T1,"P" ;POP THE MARKER STACK?
JRST POPMKS ;YES - DO IT
CAIN T1,"F" ;"POP" THE MARKER STACK FORWARD?
JRST POPMKF ;YES - DO IT
MOVEI T1,[ASCIZ /#######Unknown MARKER command/]
JRST ERROR ;ERROR IF NONE OF THE ABOVE
;HERE TO SET A MARKER
MARKST: PUSHJ P,GTMNAM ;GET THE NAME OF THE MARKER IN T2, T3
PUSHJ P,FNMNAM ;FIND THE NAME IN THE TABLE (INDEX IN T4)
AOSA T4,MRKEND ;NOT THERE - ADD IT
JRST MRKST2 ;IT'S THERE - REPLACE THE DEFINITION
CAILE T4,MRKSIZ ;GOT TOO MANY?
JRST MRKSTH ;YES - LOOK FOR A HOLE; ERROR IF NONE
MRKST1: MOVEM T2,MRKNTB-1(T4) ;NO - SAVE THE NEW NAME IN THE TABLE
MOVEM T3,MRKNT1-1(T4)
MRKST2: MOVE T1,DISPTR ;SAVE THE MARKED DISPLAY POINTER
MOVEM T1,MRKPTB-1(T4)
MOVEM T1,MRKLAT ;SAVE ALSO AS THE LATEST-SET MARKER
JRST LOOP ;AND GO GET A NEW COMMAND
MRKSTH: MOVEI T4,MRKSIZ ;LOOK FOR A HOLE IN THE MARKER TABLE
SOS MRKEND ;SET THE END INDEX BACK TO THE MAX VALUE
MRKSH1: SKIPN MRKNTB-1(T4) ;IS THIS A HOLE?
JRST MRKST1 ;YES - USE IT
SOJG T4,MRKSH1 ;NO - LOOP - COUNTED OUT?
SKIPA T1,[[ASCIZ /######All markers are in use/]]
GOMERR: MOVEI T1,[ASCIZ /######Can't find that marker/]
JRST ERROR ;AND GIVE THE ERROR
;HERE FOR THE GOTO-MARKER COMMAND - POSITION TO THE MARKER OF THE GIVEN NAME
;<ENTER>G<MARKER> GOES TO THE LATEST-SET MARKER
MARKGO: PUSHJ P,GTMNAM ;GET THE NAME OF THE MARKER IN T2, T3
JUMPE T2,MRKGO1 ;IF NO NAME, USE LATEST-SET MARKER
PUSHJ P,FNMNAM ;FIND THE NAME IN THE TABLE (INDEX IN T4)
JRST SMXERR ;NOT THERE - ERROR
SKIPA T3,MRKPTB-1(T4) ;FOUND - GET THE MARKED DISPLAY POINTER
MRKGO1: MOVE T3,MRKLAT ;NO NAME - USE LATEST-SET MARKER
MRKGO2: HRRZ T1,T3 ;GET THE ADDRESS FROM THE POINTER
CAIL T1,(EN) ;AT THE END OF THE BUFFER?
JRST GOMERR ;YES - CAN'T FIND THE MARKER
PUSHJ P,PUSMKS ;NO - PUSH THE DISPLAY PTR ON THE MARKER STACK
MRKGO3: MOVEM T3,DISPTR ;SAVE THE CURRENT POINTER
SETZB RW,CM ;PUT THE CURSOR HOME
TLO F,XPL!XPC!XPB ;SAY NO POINTERS ARE GOOD
LDB T1,T3 ;IS THE DISPLAY PTR AT THE START OF LINE?
MOVEI T4,1
CAIE T1,12
PUSHJ P,ADVDPT ;NO - MOVE TO THE START OF THE NEXT LINE
JRST DISALL ;RE-DISPLAY THE SCREEN AND GET A NEW COMMAND
;HERE ON ENTER-MARKER - GO TO THE DEFAULT MARKER
MRKDGO: PUSHJ P,RESTPM ;CLEAN UP THE PARAMETER
SKIPE T3,MRKPTB-1 ;GET THE DEFAULT MARKER - IS IT SET?
JRST MRKGO2 ;YES - GO SET IT UP
JRST GOMERR ;NO - ERROR
;HERE TO KILL THE GIVEN MARKER (CALLED WITH T4/ 0)
MARKKL: PUSHJ P,GTMNAM ;GET THE NAME OF THE MARKER IN T2, T3
CAMN T2,[ASCIZ /*/] ;WANT TO CLEAR ALL THE MARKERS?
JRST MRKKLA ;YES - DO SO
PUSHJ P,FNMNAM ;FIND THE NAME IN THE TABLE (INDEX IN T4)
JRST SMXERR ;NOT THERE - ERROR
SETZM MRKNTB-1(T4) ;FOUND - KILL IT
JRST LOOP ;GO GET A NEW COMMAND
MRKKLA: SKIPG T1,MRKEND ;CLEAR ALL THE MARKERS IN USE - ARE ANY?
JRST LOOP ;NO - NOTHING TO DO
SETZB T4,MRKEND ;GET A NULL AND RESET THE HIGHEST-IN-USE
SETZM MRKNTB-1(T1) ;CLEAR A MARKER
SOJGE T1,.-1 ;LOOP THROUGH ALL THE MARKERS
JRST LOOP ;THEN GO GET A NEW COMMAND
;HERE TO OUTPUT THE NAMES OF ALL THE DEFINED MARKERS
MARKNM: PUSHJ P,SWHBOT ;SET UP THE BOTTOM LINE
SKIPN MRKPTB-1 ;IS THERE A DEFAULT MARKER?
JRST MRKNMX ;NO - HANDLE SPECIALLY
MOVEI T1,[ASCIZ /<Default> /]
PUSHJ P,PUTSTG ;YES - SAY SO
MRKNM0: MOVE T2,MRKEND ;START WITH THE LAST-DEFINED ONE
MOVEI T3," " ;GET A SPACE AS A SEPARATOR
MRKNM1: SKIPN T1,MRKNTB-1(T2) ;GET A NAME - ANY?
JRST MRKNM2 ;NO - SKIP THIS ENTRY
PUSHJ P,PUTSQ1 ;YES - OUTPUT THE NAME
SKIPE T1,MRKNT1-1(T2) ;IS THERE A SECOND PART?
PUSHJ P,PUTSQ1 ;YES - OUTPUT IT, TOO
IDPB T3,TY ;SEPARATE NAME FROM NEXT NAME
MRKNM2: SOJG T2,MRKNM1 ;LOOP THROUGH ALL THE NAMES
JRST SWHNPE ;THEN OUTPUT THEN AND LOOP
MRKNMX: SKIPLE MRKEND ;ARE ANY MARKERS DEFINED?
JRST MRKNM0 ;YES - CONTINUE
MOVEI T1,[ASCIZ /(None defined)/]
PUSHJ P,PUTSTG ;YES - SAY SO
JRST SWHNPE ;DONE
;ERRORS FROM THE SET-MARKER OR GOTO-MARKER COMMANDS
SMXERR: MOVEI T1,[ASCIZ /#######Marker name not found/]
JRST ERROR
;SUBROUTINE TO GET THE NAME OF THE MARKER IN T2, T3
;CALL WITH T4/ 0
GTMNAM: PUSHJ P,ERASPM ;CLEAN UP THE PARAMETER FROM THE SCREEN
MOVE T4,[POINT 7,T2] ;GET POINTERS TO SOURCE AND TARGET
MOVE PT,[POINT 7,PARBUF,6]
SETZB T2,T3 ;CLEAR THE TARGET ACS
MOVEI T0,^D10 ;SET TO GET AT MOST 10 CHARACTERS
GTMNM1: ILDB T1,PT ;GET A CHARACTER OF THE NAME
JUMPE T1,CPOPJ ;DONE IF NULL
CAIL T1,"a" ;ELSE IS IT LOWER CASE?
CAILE T1,"z"
CAIA ;NO - O.K.
SUBI T1,40 ;YES - CONVERT TO UPPER
IDPB T1,T4 ;SAVE THE CHARACTER
SOJG T0,GTMNM1 ;LOOP THROUGH ALL CHARACTERS (UP TO 10)
POPJ P, ;DONE
;SUBROUTINE TO FIND THE MARKER WHOSE NAME IS GIVEN IN T2, T3
;RETURNS +2 IF FOUND, WITH INDEX IN T4; RETURNS +1 IF NOT FOUND
FNMNAM: SKIPG T4,MRKEND ;GET INDEX OF LAST ENTRY IN MARKER TABLE - ANY?
POPJ P, ;NO - RETURN FAILURE
FNMNM1: CAMN T2,MRKNTB-1(T4) ;IS THIS THE MARK?
JRST FNMNM3 ;MAYBE - CHECK THE SECOND WORD
FNMNM2: SOJGE T4,FNMNM1 ;NO - LOOP THROUGH THE TABLE
POPJ P, ;NOT FOUND - RETURN FAILURE
FNMNM3: CAME T3,MRKNT1-1(T4) ;DOES THE SECOND NAME WORD MATCH?
JRST FNMNM2 ;NO - KEEP LOOKING
AOS (P) ;YES - RETURN SUCCESS
POPJ P,
;SUBROUTINES TO WORK WITH THE MARKER STACK
;CLEAR THE ENTIRE STACK (ON A SET-FILE)
CLRMKS::SETZM MRKSTP ;POINT TO THE TOP OF THE STACK
SETZM MRKSTK ;ZERO OUT THE ENTIRE STACK
MOVE T1,[MRKSTK,,MRKSTK+1]
BLT T1,MRKSTK+MRKSTL-1
POPJ P, ;DONE
;SUBROUTINE TO PUSH A DISPLAY POINTER ON THE MARKER STACK
PUSMKS::MOVE T1,DISPTR ;GET THE CURRENT DISPLAY POINTER
MOVE T2,MRKSTP ;GET THE STACK POINTER
MOVEM T1,MRKSTK(T2) ;SAVE THE DISPLAY POINTER ON THE STACK
MOVEI T1,MRKSTL-1 ;POINT TO THE TOP OF THE STACK
SOSG MRKSTP ;BUMP THE STACK - WRAPPED AROUND?
MOVEM T1,MRKSTP ;YES - SAVE POINTER TO TOP
POPJ P, ;DONE
;SUBROUTINE TO POP A DISPLAY POINTER FROM THE MARKER STACK
POPMKS: PUSHJ P,RESTPM ;CLEAN UP THE PARAMETER ON THE SCREEN
AOS T1,MRKSTP ;BUMP AND GET THE STACK POINTER
CAILE T1,MRKSTL-1 ;WRAPPED AROUND?
SETZB T1,MRKSTP ;YES - SET TO THE BOTTOM OF THE STACK
POPMK1: SKIPE T3,MRKSTK(T1) ;GET DISPLAY POINTER FROM STACK - ANY?
JRST MRKGO3 ;YES - GO SET UP THE SCREEN
AOS T1,MRKSTP ;NO - BUMP AND GET THE STACK POINTER
CAIG T1,MRKSTL-1 ;WRAPPED AROUND?
JRST POPMK1 ;NO - SEE IF THERE'S SOMETHING HERE
POPMK2: SETZM MRKSTP ;POINT TO START OF MARKER LIST
MOVEI T1,[ASCIZ /##########Stack is empty/]
JRST ERROR
;SUBROUTINE TO GO BACK TO THE PREVIOUS ENTRY ON THE MARKER STACK
;(ALIAS POP FORWARD)
POPMKF: PUSHJ P,RESTPM ;CLEAN UP THE PARAMETER ON THE SCREEN
SOS T1,MRKSTP ;DE-BUMP AND GET THE STACK POINTER
JUMPGE T1,POPMF1 ;WRAPPED AROUND?
MOVEI T1,MRKSTL-1 ;YES - SET TO THE TOP OF THE STACK
MOVEM T1,MRKSTP
POPMF1: SKIPE T3,MRKSTK(T1) ;GET DISPLAY POINTER FROM STACK - ANY?
JRST MRKGO3 ;YES - GO SET UP THE SCREEN
SOS T1,MRKSTP ;NO - BUMP AND GET THE STACK POINTER
JUMPGE T1,POPMF1 ;IF NOT WRAPPED AROUND, CHECK AGAIN
JRST POPMK2 ;ELSE GIVE STACK-IS-EMPTY ERROR
;**********************************************************************
;PUSH: RUN THE SYSTEM EXEC ON AN INFERIOR FORK. WHEN IT POPS, CONTINUE.
PSHARG::PUSHJ P,RESTPM ;CLEAN UP (AND IGNORE) THE PARAMETER
PUSHER::TLNE TM,WDW ;WINDOWING?
JRST PUSHWI ;YES - SET THE SCREEN UP SPECIALLY
PUSHJ P,CLRALL ;CLEAR THE SCREEN
PUSHR0: PUSHJ P,PUTTYP ;NOW
IFN TOPS10,<
OUTSTR [ASCIZ\[Saving current context]
\]
MOVEI T1,CTXARG## ;GET ADDRESS OF CTX. ARG BLOCK
CTX. T1, ;SAVE/PUSH OUR CONTEXT
SKIPA T2,T1 ;COPY RETURNED AC
JRST PUSHOK
MOVEI T1,[ASCIZ\Couldn't save current context...continuing\]
CAIN T2,CTXARG## ;AC UNACHANGED?
MOVEI T1,[ASCIZ\CTX. UUO unimplemented\]
TLNE T2,(CT.ETX) ;ERROR TEXT RETURNED?
MOVEI T1,CTXBUF## ;POINT TO IT
TLNE T2,(CT.RUN) ;RUN UUO ERROR?
MOVEI T1,[ASCIZ\Program run in new context failed\]
PUSHJ P,PUTBTM ;DISPLAY MESSAGE ON BOTTOM LINE
PUSHJ P,PROTOF
PUSHOK:
> ;END IFN TOPS10 -- WASN'T THAT EASY COMPARED TO -20 CRUFT
IFE TOPS10,<
MOVEI T1,.PRIIN
MOVE T2,FMDSAV ;GET BACK THE ORIGINAL FMOD WORD
SFMOD
STPAR
MOVEI T1,-5 ;RE-ENABLE MONITOR INTERRUPTS
SETO T2,
STIW
MOVEI T1,-1 ;RESTORE THE CCOC WORDS
DMOVE T2,SAVCOC
SFCOC
SKIPE T1,EXCHDL ;DOES THE FORK ALREADY EXIST?
JRST PUSHR2 ;YES - JUST CONTINUE IT
HRROI T2,[ASCIZ /SYSTEM:EXEC.EXE/]
PUSHJ P,RUNFRK ;RUN THE EXEC AND RETURN WHEN IT EXITS
MOVEM T1,EXCHDL ;SAVE THE FORK HANDLE FOR NEXT TIME
PUSHR1:
IFN FTECHO,<
HRRZM P,EKOFLG ;MAKE SURE THE ECHO AND BREAK SETS
HRRZM P,BRKFLG ; GET RE-SET
>
> ;END IFE TOPS10
PUSHJ P,INITTY ;WHEN DONE, RE-INIT THE TERMINAL
PUSHJ P,@RTE(TM) ;CALL USER'S ENTRY ROUTINE
PUSHJ P,INITT1
IFE TOPS10,<
PUSHJ P,INITTF
>
IFN FTLSR,<
PUSHJ P,ULMSCR ;UNLIMIT SCROLLING REGION, IF POSSIBLE
>
JRST DISALL ;THEN RE-DISPLAY THE SCREEN; DONE
IFE TOPS10,<
PUSHR2: MOVEI T2,1 ;REENTER THE EXEC
SFRKV
WFORK ;WAIT FOR THE FORK TO COMPLETE
JRST PUSHR1 ;THEN RE-JOIN THE FLOW
> ;END IFE TOPS10
;HERE IF WINDOWING - LEAVE THE TOP WINDOW ALONE AND CLEAR THE BOTTOM ONE
PUSHWI:
IFN FTLSR,<
MOVE T2,LPP(TM) ;LIMIT TERMINAL'S SCROLLING REGION, IF POSSIBLE
AOJ T2,
MOVE T3,SAVLPP ; TO THE BOTTOM HALF OF THE SCREEN
PUSHJ P,LIMSCR
>
SKIPE HOMPOS ;WINDOWING - IN BOTTOM WINDOW NOW?
TDZA T4,T4 ;YES - POSITION HOME
MOVE T4,LPP(TM) ;NO - POSITION TO START OF LOWER WINDOW
PSHWI0: PUSHJ P,POSLIN
SKIPE HOMPOS ;IN BOTTOM WINDOW NOW?
SKIPA T1,CPG(TM) ;YES - GET CLEAR-EOP SEQUENCE
SKIPN T1,SAVCPG ;NO - GET BOTTOM'S CLEAR-EOP SEQUENCE
JUMPE T1,PSHWI1 ;IF NO CLEAR-EOP SEQUENCE, GO SIMULATE
PUSHJ P,PUTSEQ ;CLEAR THE BOTTOM HALF OF THE SCREEN
JRST PUSHR0 ;RE-JOIN THE FLOW
PSHWI1: SKIPA T4,LPP(TM) ;OUTPUT A BUNCH OF CLEAR-LINES
PSHWI2: PUSHJ P,CDOWN
PUSHJ P,CLRLNA
SOJG T4,PSHWI2
SKIPE HOMPOS ;WINDOWING - IN BOTTOM WINDOW NOW?
TDZA T4,T4 ;YES - POSITION HOME
MOVE T4,LPP(TM) ;NO - POSITION TO START OF LOWER WINDOW
PUSHJ P,POSLIN
JRST PUSHR0 ;RE-JOIN THE FLOW
IFE TOPS10,<
;SUBROUTINE TO CREATE A FORK AND RUN THE PROGRAM WHOSE ASCII NAME IS
;POINTED TO BY AC T2. RETURNS WHEN PROGRAM EXITS, WITH FORK HANDLE IN T1
RUNFRK: MOVE T1,[GJ%OLD+GJ%SHT]
GTJFN
HALTF
HRRZ T4,T1 ;SAVE JFN FOR LATER
MOVSI T1,200000 ;CREATE AN INFERIOR FORK
CFORK
HALTF
RPCAP ;GET THE USER'S CAPABILITIES
ERJMP RUNFR1 ;FAILED - SKIP THIS
TLZ T2,(SC%LOG) ;DON'T LET THE USER LOG OUT
EPCAP ; FROM THE LOWER FORK
ERJMP RUNFR1 ;FAILED - PROCEED
RUNFR1: HRL T1,T1 ;PUT PROCESS HANDLE IN LH
HRR T1,T4 ;AND FILE'S JFN IN RH (NO SPECIAL FLAGS)
GET ;READ IN THE PROGRAM
HLRZ T1,T1 ;PUT PROCESS HANDLE IN RH (AGAIN)
SETZ T2, ;START THE FORK RUNNING
SFRKV
WFORK ;WAIT FOR THE FORK TO COMPLETE
POPJ P, ;AND RETURN
> ;END IFE TOPS10
END
Reference in New Issue View Git Blame Copy Permalink