github.com/PDP-10.stacken
1
0
Fork 0
mirror of https://github.com/PDP-10/stacken.git synced 2026-03-06 02:58:54 +00:00
Code Issues Projects Releases Wiki Activity
Files
master
PDP-10.stacken/files/stacken-tape-backup/dskb:10_7/spear/sprret.spe
Lars Brinkhoff 6e18f5ebef Extract files from tape images. 
Some tapes could not be extracted.
2021-01-29 10:47:33 +01:00

1429 lines
38 KiB
Plaintext
Raw Permalink Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
First used in SPEAR 1.1 -- written 22-June-81
Template blocks for Full style RFB blocks
@@002 FULL TEMPL
TIME OF OCCURRENCE \
@@010 FULL TEMPL
DIAGNOSTIC \ VERSION \
USER PPN: \
@@011 FULL TEMPL
FAILED AT TEST \ \
@@011.1 FULL TEMPL
SUCCEEDED \
@@012 FULL TEMPL
LAST STATUS WAS ON \
CONNECTS SINCE CONNECTS SINCE
PORT/NODE LAST ENTRY STARTED
@@013 FULL TEMPL
\> / \> \>>>>>> \>>>>>>
@@014 FULL TEMPL
MESSAGE: \
@@073 FULL TEMPL
Interface: \
Channel: \
Time of Load: \
Error Code: \
Microcode Version: \
Minimum Version Required: \
Device Code: \
Device Number: \
Offset into Bootstrap Vector: \
@@074 FULL TEMPL
Unit Name: \
Structure: \
Pack Id: \
File: \>>>>>.\<<<<<
Program: \
P,PN: \
Error code: \
LBN: \
Retries: \
Software error counts: \00000,,000000
\00000,,000000
\00000,,000000
@@100.1 FULL TEMPL
CI20 \
@@100.2 FULL TEMPL
CI20 Forced \ \
@@100.3 FULL TEMPL
NIA20 \
@@100.4 FULL TEMPL
NIA20 Forced \ \
@@101.1 FULL TEMPL
CI20 INFORMATION
CSR REG \00000,,000000 \
UCODE VERSION \>>>>>>>>>>>
UCODE \
CRAM ADDRESS \000/ \0000 \0000 \0000 \0000
@@101.2 FULL TEMPL
CI20 INFORMATION
CSR REG \00000,,000000 \
UCODE VERSION \>>>>>>>>>>>
UCODE \
CRAM ADDRESS \000 \
@@101.3 FULL TEMPL
NIA20 INFORMATION
CSR REG \00000,,000000 \
UCODE VERSION \>>>>>>>>>>>
UCODE \
CRAM ADDRESS \000/ \0000 \0000 \0000 \0000
@@101.4 FULL TEMPL
NIA20 INFORMATION
CSR REG \00000,,000000 \
UCODE VERSION \>>>>>>>>>>>
UCODE \
CRAM ADDRESS \000 \
@@102 FULL TEMPL
CHANNEL INFORMATION
STATUS WORD 0 \00000,,000000
CW 1 \00000,,000000
STATUS WORD 1 \00000,,000000 \
STATUS WORD 2 \00000,,000000
@@110 FULL TEMPL
COMMON DATA
COMMAND REF #: \0000000 HOST COMMAND #: \
CI20 PORT #: \>>>>>
NODE #: \>>>>>
SEQUENCE #: \>>>>>
FORMAT: \0 \
FLAGS: \0 \
EVENT: \000 \
CNTLR DEVICE #: \000\0000000
CNTLR CLASS: \0 \
CNTLR MODEL: \0 \
CNTLR SOFTWARE VER: \0
CNTLR HARDWARE VER: \0
@@112 FULL TEMPL
HOST MEMORY ERROR DATA
HOST MEM ADDR: \00000,,000000
@@103 FULL TEMPL
KLIPA Channel: \<
Reason for Counter gathers: \
CI node: \
Individual Counters:
PATH A ACK: \
PATH A NAK: \
PATH A NO RESP: \
PATH B ACK: \
PATH B NAK: \
PATH B NO RESP: \
DATAGRAMS DISCARDED: \
PACKETS TRANSMITTED: \
PACKETS RECEIVED: \
CRC ERRORS ON PACKETS: \
MOVER PARITY ERRORS: \
CBUS PARITY ERRORS: \
REGISTER PLIPE ERRORS: \
DATA PLIPE ERRORS: \
CHANNEL ERRORS: \
EBUS PARITY ERRORS: \
SPURIOUS CHANNEL ERRORS: \
CBUS AVAILABLE TIMEOUTS: \
SPURIOUS RECEIVE ATTENTIONS: \
SPURIOUS TRANSMIT ATTENTIONS: \
TRANSMIT BUFFER PAR ERRORS: \
TRANSMIT TIMEOUTS: \
@@113 FULL TEMPL
UNIT IDENTIFICATION DATA
UNIT NUMBER: \>>>>>
MULTI-UNIT CODE: \000
UNIT DEVICE #: \000\0000000
UNIT CLASS: \0 \
UNIT MODEL: \0 \
UNIT SOFTWARE VER: \0
UNIT HARDWARE VER: \0
VOLUME S/N: \0000000
@@114 FULL TEMPL
DISK TRANSFER DATA
LEVEL: \>>>
RETRY: \>>>
HEADER: \0000000 \
BLOCK AT ERROR WAS \
@@115 FULL TEMPL
SDI DATA
HEADER: \0000000 \
BLOCK AT ERROR WAS \
CONTROLLER DATA
REQUEST BYTE: \0 \
MODE BYTE: \0 \
ERROR BYTE: \0 \
CONTROLLER BYTE: \0
RETRY COUNT / FAILURE CODE: \0
@@116 FULL TEMPL
UNKNOWN DEVICE DATA
GET STATUS BYTES 11-8: \0000000
15-12: \0000000
@@116.1 FULL TEMPL
RA80/81 DEVICE DATA
LAST POSITION COMMAND: \0
SDI ERROR STATUS: \0 \
LAST SEEK CYLINDER: \0\0
HEAD NUMBER: \>>
MICROPROCESSOR LEDS: \0 \
FRONT PANEL FAULT CODE: \0 \
@@116.4 FULL TEMPL
RA60 DEVICE DATA
PREVIOUS CYLINDER: \000
PREVIOUS HEAD NUMBER: \>>
CURRENT CYLINDER: \000
CURRENT HEAD NUMBER: \>>
ERROR CODE: \0
@@117 FULL TEMPL
SMALL DISK DATA
CYLINDER: \>>>>>
@@120 FULL TEMPL
BYTES \-\ \00 \00 \00 \00 (\0)
@@120.7 FULL TEMPL
UNDEFINED DATA IN 8 BIT OCTAL BYTES
(UNUSED RIGHT 4 BITS IN 36-BIT WORD)
@@121 FULL TEMPL
MSCP STATUS (HEX): \00000000
@@122.7 FULL TEMPL
UNTRANSLATED DATA IN 8 BIT OCTAL BYTES
(UNUSED RIGHT 4 BITS IN 36-BIT WORD)
@@123.7 FULL TEMPL
EXTRANEOUS DATA IN 8 BIT OCTAL BYTES
(UNUSED RIGHT 4 BITS IN 36-BIT WORD)
@@200 FULL TEMPL
COMMON DATA
COMMAND REF #: \0000000 HOST COMMAND #: \
CI20 PORT #: \>>>>>
NODE #: \>>>>>
MEDIA ID: \00000,,000000 \
BLOCKS READ: \>>>>>>>>>>
BLOCKS WRITTEN: \>>>>>>>>>>
POSITION AT ERR 1: \>>>>>>>>>>
POSITION AT ERR 2: \>>>>>>>>>>
UNIT NUMBER: \>>>>>
ENDCODE: \0 \
FLAGS: \0 \
STATUS: \000 \
@@201 FULL TEMPL
READ OR WRITE COMMAND DATA
BYTE COUNT: \>>>>>>>>>>
FIRST BAD BLOCK: \>>>>>>>>>>
@@
Template blocks for Short style RFB blocks
@@010 SHORT TEMPL
DIAGNOSTIC \ V\, RUN BY PPN: \
@@011 SHORT TEMPL
FAILED TEST \ \
@@011.1 SHORT TEMPL
SUCCEEDED \
@@012 SHORT TEMPL
LAST STATUS WAS ON \
@@014 SHORT TEMPL
MESSAGE: \
@@073 SHORT TEMPL
U Code Loaded, Interface: \ Channel: \ at: \ Code: \ Version: \
@@074 SHORT TEMPL
Sftwr Det. Disk Error, Unit: \ Structure: \ Pack Id: \ File: \>>>>>.\<<<<<
@@100.1 SHORT TEMPL
CI20 \
@@100.2 SHORT TEMPL
CI20 Forced \ \
@@100.3 SHORT TEMPL
NIA20 \
@@100.4 SHORT TEMPL
NIA20 Forced \ \
@@101.1 SHORT TEMPL
CSR: \00000,,000000 CRAM ADDRESS: \000=\0000 \0000 \0000 \0000
UCODE \ \@
@@101.2 SHORT TEMPL
CSR: \00000,,000000 CRAM ADDRESS: \000
UCODE \ \@
@@101.3 SHORT TEMPL
CSR: \00000,,000000 CRAM ADDRESS: \000=\0000 \0000 \0000 \0000
UCODE \ \@
@@101.4 SHORT TEMPL
CSR: \00000,,000000 CRAM ADDRESS: \000
UCODE \ \@
@@102 SHORT TEMPL
PORT ERROR WORD: \000000,,000000
@@103 SHORT TEMPL
Counters on KLIPA channel # \< reason:\
@@110 SHORT TEMPL
HSC50 Error Message Node \ \
@@113 SHORT TEMPL
on \ #\ S/N \ \@
@@114 SHORT TEMPL
at \ \ \@
@@115 SHORT TEMPL
SDI Error - \ - \@
@@116 SHORT TEMPL
@@116.1 SHORT TEMPL
\ - \ - \
@@116.4 SHORT TEMPL
ERROR CODE: \
@@120.7 SHORT TEMPL
@@121 SHORT TEMPL
MSCP ERROR - MSCP STATUS (HEX)=\00000000
@@122.7 SHORT TEMPL
@@123.7 SHORT TEMPL
@@200 SHORT TEMPL
HSC50 End Message Node \ \: Unit \ \ \@
@@
The following messages are for DECNET Phase IV "Event
Logging Message" translation.
@@SHORT UNKNOWN FUNCTION CODE
DECNET Function Code ## -- ## bytes (No translation)
@@UNKNOWN FUNCTION CODE
No translation available for Function Code ##
Dump of ## data bytes in octal & decimal:
octal decimal
@@REMAINING BYTE DUMP
%%%% %%%%
@@SHORT DECNET TEXT
##
@@DECNET TEXT
##
@@DECNET PARAMS
##
@@
***** End of DECNET Phase IV messages! *****
@@PACKET SUMMARY
SPEAR Version ##. Retrieval from ##
Report generated ##
As directed by ##
Report sent to ##
@@PACKET WARNING
*** Warning (TOPS-10 only) ***
The original event file (from which the packet file was derived) must
exist in the original directory. Otherwise, the RETRIEVE output will be
incorrect.
@@OVERALL SUMMARY
SPEAR Version ##. Retrieval from ##
Report generated ##
As directed by ##
Selected window: ## to ##.
Selected records are ##
Selection type is ##
Report sent to ##
@@SHORT DATE
SEQ TIME \
@@SHORT HEAD
\ \ \@
@@FULL HEAD
***********************************************
##
LOGGED ON ## MONITOR UPTIME WAS ##
DETECTED ON SYSTEM # ##
RECORD SEQUENCE NUMBER: ##
***********************************************
@@SHORT 114
STATS DRIVE: ##, VOLID: ##, REASON: ##.
@@COMMON 114
Volume ID: ## Reason recorded: ##
Channel info(##): ## # ## on PI level ##
Device info(##): ##, ## ## PIA: ##
READS WRITES ##
TOTAL : %%%%%%%%%% %%%%%%%%%% %%%%%%%%%%
@@TAPE 114
NRZI : %%%%%%%%%% %%%%%%%%%%
PE : %%%%%%%%%% %%%%%%%%%%
GCR : %%%%%%%%%% %%%%%%%%%%
@@SHORT 246
HSC50 Out Of Band Message KLIPA Chn: ## HSC50 Node: ##
HSC50 Name: ##
Message: ##
@@COMMON 246
KLIPA Chn: ##
HSC50 Node: ##
HSC50 Name: ##
Message: ##
@@01_00
Extended sense data not updated
@@01_01
Extended sense data updated and contains something of interest
@@03_01
Command was issued with tape at BOT
@@03_02
Saw BOT indicator after tape motion started
@@03_03
ARA ID detected
@@11_01
TU is on-line but not ready (Possible when TU is manually rewound
or loading)
@@11_02
Fatal error has occurred and this command cannot be performed until
error status has been presented and a TM CLEAR received
@@11_03
Access to TU is allowed but TU is either rewinding or doing a DSE
from another MASSBUS or keypad command
@@15_01
No record found within 25 ft(7.6 m) of tape
@@15_02
ID Burst neither PE or GCR
@@15_03
ARA ID not found
@@15_04
No GAP found after ID Burst (PE) or ARA ID Burst (GCR)
@@20_00
Extended sense data not updated
@@20_01
Extended sense data updated and contains something of interest
@@21_00
Extended sense data not updated
@@21_01
Extended sense data updated and contains something of interest
@@22_01
CRC error, ACRC error, pointer mismatch, uncorrectable or two track
error set in ECCSTA register (This code generated by write GCR
operations)
@@22_02
CRC error, ACRC error, or uncorrectable set in ECCSTA register
(This code generated by read GCR operations)
@@22_03
Uncorrectable error set in ECCSTA register (This code generated
by read PE operations)
@@22_04
AMTIE, pointer mismatch, uncorrectable, two track error or single
track error set in ECCSTA register (This code generated by write PE
operations)
@@22_05
At least one bit set in ECCSTA register
@@22_06
At least one Write Fail bit set in RPFAIL and RPATH registers
(This code generated by write PE operations)
@@22_07
More than one Write Fail bit set in RPFAIL and RPATH registers
(This code generated by write GCR operations)
@@22_10
RSTAT contains bad code
@@22_11
CRC characters from WMC and RMC do not match (This code generated
by write PE operations)
@@22_12
MASSBUS data bus parity error
@@22_13
Record length incorrect during retry opposite attempt: invalid data
has been transferred
@@30_01
Illegal command code
@@30_02
Data transfer command issued while non-data transfer command in
progress on same tape unit
@@30_03
WMC error; check Encode register for reason. May be Illegal Format
or Skip Count codes
@@30_04
RUN not received`from MASSBUS controller
@@30_05
Command read from RMC register RCMLP did!not match command loaded
into RCMD register (This code generated in selected function
routine)
@@30_06
ECC ROM parity error
@@30_07
XMC ROM parity error
@@30_10
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code glnerated when Verify ID Burst
command loaded during write of BOT area)
@@30_11
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Verify ARA Burst
command loaded during write of BOT area)
@@30_12
Command read from RMC register RCMDP did not match command loaded
into RCMD register (This code generated when Verify ARA ID command
loaded during write of BOT area)
@@30_13
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Verify Gap command
loaded during write of BOT area)
@@30_14
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Read ID Burst command
loaded during read of BOT area)
@@30_15
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Verify ARA ID command
loaded during read of BOT area)
@@30_16
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Verify Gap command
loaded during read of BOT area)
@@30_17
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Find Gap command
loaded during Erase Gap routine)
@@30_20
WMC LEFT failed to set in Extended Sense routine
@@30_21
XL PE set in INTSTA register
@@30_22
XMC DONE did not set
@@30_23
WMC ROM PE or RD PE set in WMCERR register
@@31_01
TU Status parity error
@@31_02
TU Command parity error
@@31_03
Rewinding tape went off-line
@@31_04
Tape went not ready during DSE
@@31_05
TU CMD status changed during DSE
@@31_06
TU velocity never came up to speed
@@31_07
TU velocity changed after up to speed and writing started
@@31_10
TU CMD did not load correctly to start tape motion in selected
function routine
@@31_11
TU CMD did not load correctly to set drive density
@@31_12
TU CMD did not load correctly to set drive density
@@31_13
TU CMD did not load correctly to set drive density
@@31_14
Failed to write density ID Burst correctly
@@31_15
Failed to write ARA Burst correctly
@@31_16
Failed to write ARA ID correctly
@@31_17
ARA error bit set in MTA Status B register
@@31_20
unknown
@@31_21
Could not find a gap after the ID code was written correctly
@@31_22
TU CMD did not load correctly to start tape motion to read ID Burst
@@31_23
Time-out looking for BOT after detecting ARA ID Burst
@@31_24
Failed to write Tape Mark correctly
@@31_25
Tape never came up to speed while trying to reposition for retry of
writing Tape Mark
@@31_26
TU CMD did not load correctly to start tape motion in Erase Gap
routine
@@31_27
Could not detect a gap in Erase Gap routine
@@31_30
Could not detect a gap after writing record
@@31_31
Read path terminated before entire record was written
@@31_32
Could not find a gap after writing record and read path terminated
early
@@31_33
TU CMD did not load correctly to backup for retry of Write Tape Mark
@@31_34
TU Velocity changed after up to speed while trying to reposition
for retry of writing Tape Mark
@@31_35
TU CMD did not load correctly to backup to retry a read of BOT ID
@@31_36
Time-out looking for BOT after failing to write BOT ID
@@31_37
TU velocity changed while writing PE gap before starting to write
record
@@31_40
TU CMD did not load correctly to set PE tape density at start of
write BOT ID Burst
@@31_41
TU CMD did not load correctly to set GCR tape density after writing
Density ID
@@31_42
TU CMD did not load correctly to set PE tape density at start of
read from BOT
@@31_43
TU CMD did not load correctly to set GCR tape density after reading
a GCR Density ID Burst
@@32_00
RST0 interrupt occurred with TM RDY still set
@@32_01
Power failed to interrupt
@@32_02
Interrupt for unknown readon on channel 5.5
@@32_03
Interrupt for unknown readon on channel 6.5
@@32_04
Interrupt for unknown readon on channel 7
@@32_05
05 Interrupt for unknown readon on channel 7.5
@@32_06
CAS contention retry count expired
@@32_07
CAS Contention error not retryable
@@32_10
Queue error; could not find queue entry
@@32_11
Queue entry already full
@@32_12
8085 ROM parity error
@@32_13
In-line test 0; WMC self test failed = M8959-M8957
@@32_14
In-line test 1; XMC ROM parity error M8958-M8959-M8960
@@32_15
In-line test 2; RPM self test failed M8953-M8960
@@32_16
In-line test 3; RPM1 channel 0 self test failure M8950 (slot AB12)
@@32_!7
In-line ueSt 4; RPM1 channel 1 self test failure M8950 (slot AB13)
@@32_20
In-line test 5; RPM1 channel 2 self test failure M8950 (slot AB14)
@@32_21
In-line test 6; RPM1 channel 3 self test failure M8950 (slot AB15)
@@32_22
In-line test 7; RPM1 channel 4 self test failure M8950 (slot AB16)
@@32_23
In-line test 10; RPM1 channel 5 self test failure M8950 (slot CD13)
@@32_24
In-line test 11; RPM1 channel 6 self test failure M8950 (slot CD14)
@@32_25
In-line test 12; RPM1 channel 7 self test failure M8950 (slot CD15)
@@32_26
In-line test 13; RPM1 channel P self test failure M8950 (slot CD16)
@@32_27
In-line test 14; RPM1 error correction self test M8950-M8951-M8953
@@32_30
In-line test 15; 40000-40777 RAM memory failure M8960
@@32_31
In-line test 16; 41000-41777 RAM memory failure M8960
@@32_32
In-line test 17; 42000-42777 RAM memory failure M8960
@@32_33
In-line test 20; 43000-43777 RAM memory failure M8960
@@32_34
In-line test 21; 44000-44777 RAM memory failure M8960
@@32_35
In-line test 22; 45000-45777 RAM memory failure M8960
@@32_36
In-line test 23; 46000-46777 RAM memory failure M8960
@@32_37
In-line test 24; 47000-47777 RAM memory failure M8960
@@32_40
In-line test 25; loop write to read at TU port 0 - GCR
@@32_41
In-line test 26; loop write to read at TU port 0 - PE
@@32_42
In-line test 27; loop write to read at TU port 1 - GCR
@@32_43
In-line test 30; loop write to read at TU port 1 - PE
@@32_44
In-line test 31; loop write to read at TU port 2 - GCR
@@32_45
In-line test 32; loop write to read at TU port 2 - PE
@@32_46
In-line test 33; loop write to read at TU port 3 - GCR
@@32_47
In-line test 34; loop write to read at TU port 3 - PE
@@32_50
In-line test 35; loop write to read at MTA 0 - GCR
@@32_51
In-line test 36; loop write to read at MTA 0 - PE
@@32_52
In-line test 37; loop write to read at MTA 1 - GCR
@@32_53
In-line test 40; loop write to read at MTA 1 - PE
@@32_54
In-line test 41; loop write to read at MTA 2 - GCR
@@32_55
In-line test 42; loop write to read at MTA 2 - PE
@@32_56
In-line test 43; loop write to read at MTA 3 - GCR
@@32_57
In-line test 44; loop write to read at MTA 3 - PE
@@34_01
Control bus parity error
@@34_02
Illegal register referenced
@@77_01
Keypad entry error
@@77_02
TM78 not off-line
@@77_03
Illegal instruction code
@@77_04
Microdiagnostic start or continue command issued
@@77_05
Microdiagnostic loop on error command issued
@@UNKNOWN TU78
UNEXPECTED combination -- interrupt code: ##
failure code: ##
@@
First used in SPEAR 1.1 -- written 22-June-81
Template blocks for Full style RFB blocks
@@002 FULL TEMPL
TIME OF OCCURRENCE \
@@010 FULL TEMPL
DIAGNOSTIC \ VERSION \
USER PPN: \
@@011 FULL TEMPL
FAILED AT TEST \ \
@@011.1 FULL TEMPL
SUCCEEDED \
@@012 FULL TEMPL
LAST STATUS WAS ON \
CONNECTS SINCE CONNECTS SINCE
PORT/NODE LAST ENTRY STARTED
@@013 FULL TEMPL
\> / \> \>>>>>> \>>>>>>
@@014 FULL TEMPL
MESSAGE: \
@@100.1 FULL TEMPL
CI20 \
@@100.2 FULL TEMPL
CI20 Forced \ \
@@100.3 FULL TEMPL
NIA20 \
@@100.4 FULL TEMPL
NIA20 Forced \ \
@@101.1 FULL TEMPL
CI20 INFORMATION
CSR REG \00000,,000000 \
UCODE VERSION \>>>>>>>>>>>
UCODE \
CRAM ADDRESS \000/ \0000 \0000 \0000 \0000
@@101.2 FULL TEMPL
CI20 INFORMATION
CSR REG \00000,,000000 \
UCODE VERSION \>>>>>>>>>>>
UCODE \
CRAM ADDRESS \000 \
@@101.3 FULL TEMPL
NIA20 INFORMATION
CSR REG \00000,,000000 \
UCODE VERSION \>>>>>>>>>>>
UCODE \
CRAM ADDRESS \000/ \0000 \0000 \0000 \0000
@@101.4 FULL TEMPL
NIA20 INFORMATION
CSR REG \00000,,000000 \
UCODE VERSION \>>>>>>>>>>>
UCODE \
CRAM ADDRESS \000 \
@@102 FULL TEMPL
CHANNEL INFORMATION
STATUS WORD 0 \00000,,000000
CW 1 \00000,,000000
STATUS WORD 1 \00000,,000000 \
STATUS WORD 2 \00000,,000000
@@110 FULL TEMPL
COMMON DATA
COMMAND REF #: \0000000 HOST COMMAND #: \
CI20 PORT #: \>>>>>
NODE #: \>>>>>
SEQUENCE #: \>>>>>
FORMAT: \0 \
FLAGS: \0 \
EVENT: \000 \
CNTLR DEVICE #: \000\0000000
CNTLR CLASS: \0 \
CNTLR MODEL: \0 \
CNTLR SOFTWARE VER: \0
CNTLR HARDWARE VER: \0
@@112 FULL TEMPL
HOST MEMORY ERROR DATA
HOST MEM ADDR: \00000,,000000
@@103 FULL TEMPL
KLIPA Channel: \<
Reason for Counter gathers: \
CI node: \
Individual Counters:
PATH A ACK: \
PATH A NAK: \
PATH A NO RESP: \
PATH B ACK: \
PATH B NAK: \
PATH B NO RESP: \
DATAGRAMS DISCARDED: \
PACKETS TRANSMITTED: \
PACKETS RECEIVED: \
CRC ERRORS ON PACKETS: \
MOVER PARITY ERRORS: \
CBUS PARITY ERRORS: \
REGISTER PLIPE ERRORS: \
DATA PLIPE ERRORS: \
CHANNEL ERRORS: \
EBUS PARITY ERRORS: \
SPURIOUS CHANNEL ERRORS: \
CBUS AVAILABLE TIMEOUTS: \
SPURIOUS RECEIVE ATTENTIONS: \
SPURIOUS TRANSMIT ATTENTIONS: \
TRANSMIT BUFFER PAR ERRORS: \
TRANSMIT TIMEOUTS: \
@@113 FULL TEMPL
UNIT IDENTIFICATION DATA
UNIT NUMBER: \>>>>>
MULTI-UNIT CODE: \000
UNIT DEVICE #: \000\0000000
UNIT CLASS: \0 \
UNIT MODEL: \0 \
UNIT SOFTWARE VER: \0
UNIT HARDWARE VER: \0
VOLUME S/N: \0000000
@@114 FULL TEMPL
DISK TRANSFER DATA
LEVEL: \>>>
RETRY: \>>>
HEADER: \0000000 \
BLOCK AT ERROR WAS \
@@115 FULL TEMPL
SDI DATA
HEADER: \0000000 \
BLOCK AT ERROR WAS \
CONTROLLER DATA
REQUEST BYTE: \0 \
MODE BYTE: \0 \
ERROR BYTE: \0 \
CONTROLLER BYTE: \0
RETRY COUNT / FAILURE CODE: \0
@@116 FULL TEMPL
UNKNOWN DEVICE DATA
GET STATUS BYTES 11-8: \0000000
15-12: \0000000
@@116.1 FULL TEMPL
RA80/81 DEVICE DATA
LAST POSITION COMMAND: \0
SDI ERROR STATUS: \0 \
LAST SEEK CYLINDER: \0\0
HEAD NUMBER: \>>
MICROPROCESSOR LEDS: \0 \
FRONT PANEL FAULT CODE: \0 \
@@116.4 FULL TEMPL
RA60 DEVICE DATA
PREVIOUS CYLINDER: \000
PREVIOUS HEAD NUMBER: \>>
CURRENT CYLINDER: \000
CURRENT HEAD NUMBER: \>>
ERROR CODE: \0
@@117 FULL TEMPL
SMALL DISK DATA
CYLINDER: \>>>>>
@@120 FULL TEMPL
BYTES \-\ \00 \00 \00 \00 (\0)
@@120.7 FULL TEMPL
UNDEFINED DATA IN 8 BIT OCTAL BYTES
(UNUSED RIGHT 4 BITS IN 36-BIT WORD)
@@121 FULL TEMPL
MSCP STATUS (HEX): \00000000
@@122.7 FULL TEMPL
UNTRANSLATED DATA IN 8 BIT OCTAL BYTES
(UNUSED RIGHT 4 BITS IN 36-BIT WORD)
@@123.7 FULL TEMPL
EXTRANEOUS DATA IN 8 BIT OCTAL BYTES
(UNUSED RIGHT 4 BITS IN 36-BIT WORD)
@@200 FULL TEMPL
COMMON DATA
COMMAND REF #: \0000000 HOST COMMAND #: \
CI20 PORT #: \>>>>>
NODE #: \>>>>>
MEDIA ID: \00000,,000000 \
BLOCKS READ: \>>>>>>>>>>
BLOCKS WRITTEN: \>>>>>>>>>>
POSITION AT ERR 1: \>>>>>>>>>>
POSITION AT ERR 2: \>>>>>>>>>>
UNIT NUMBER: \>>>>>
ENDCODE: \0 \
FLAGS: \0 \
STATUS: \000 \
@@201 FULL TEMPL
READ OR WRITE COMMAND DATA
BYTE COUNT: \>>>>>>>>>>
FIRST BAD BLOCK: \>>>>>>>>>>
@@
Template blocks for Short style RFB blocks
@@010 SHORT TEMPL
DIAGNOSTIC \ V\, RUN BY PPN: \
@@011 SHORT TEMPL
FAILED TEST \ \
@@011.1 SHORT TEMPL
SUCCEEDED \
@@012 SHORT TEMPL
LAST STATUS WAS ON \
@@014 SHORT TEMPL
MESSAGE: \
@@100.1 SHORT TEMPL
CI20 \
@@100.2 SHORT TEMPL
CI20 Forced \ \
@@100.3 SHORT TEMPL
NIA20 \
@@100.4 SHORT TEMPL
NIA20 Forced \ \
@@101.1 SHORT TEMPL
CSR: \00000,,000000 CRAM ADDRESS: \000=\0000 \0000 \0000 \0000
UCODE \ \@
@@101.2 SHORT TEMPL
CSR: \00000,,000000 CRAM ADDRESS: \000
UCODE \ \@
@@101.3 SHORT TEMPL
CSR: \00000,,000000 CRAM ADDRESS: \000=\0000 \0000 \0000 \0000
UCODE \ \@
@@101.4 SHORT TEMPL
CSR: \00000,,000000 CRAM ADDRESS: \000
UCODE \ \@
@@102 SHORT TEMPL
PORT ERROR WORD: \000000,,000000
@@103 SHORT TEMPL
Counters on KLIPA channel # \< reason:\
@@110 SHORT TEMPL
HSC50 Error Message Node \ \
@@113 SHORT TEMPL
on \ #\ S/N \ \@
@@114 SHORT TEMPL
at \ \ \@
@@115 SHORT TEMPL
SDI Error - \ - \@
@@116 SHORT TEMPL
@@116.1 SHORT TEMPL
\ - \ - \
@@116.4 SHORT TEMPL
ERROR CODE: \
@@120.7 SHORT TEMPL
@@121 SHORT TEMPL
MSCP ERROR - MSCP STATUS (HEX)=\00000000
@@122.7 SHORT TEMPL
@@123.7 SHORT TEMPL
@@200 SHORT TEMPL
HSC50 End Message Node \ \: Unit \ \ \@
@@
The following messages are for DECNET Phase IV "Event
Logging Message" translation.
@@SHORT UNKNOWN FUNCTION CODE
DECNET Function Code ## -- ## bytes (No translation)
@@UNKNOWN FUNCTION CODE
No translation available for Function Code ##
Dump of ## data bytes in octal & decimal:
octal decimal
@@REMAINING BYTE DUMP
%%%% %%%%
@@SHORT DECNET TEXT
\\@
@@DECNET TEXT
\\@
@@
***** End of DECNET Phase IV messages! *****
@@PACKET SUMMARY
SPEAR Version ##. Retrieval from ##
Report generated ##
As directed by ##
Report sent to ##
@@PACKET WARNING
*** Warning (TOPS-10 only) ***
The original event file (from which the packet file was derived) must
exist in the original directory. Otherwise, the RETRIEVE output will be
incorrect.
@@OVERALL SUMMARY
SPEAR Version ##. Retrieval from ##
Report generated ##
As directed by ##
Selected window: ## to ##.
Selected records are ##
Selection type is ##
Report sent to ##
@@SHORT DATE
SEQ TIME \
@@SHORT HEAD
\ \ \@
@@FULL HEAD
***********************************************
##
LOGGED ON ## MONITOR UPTIME WAS ##
DETECTED ON SYSTEM # ##
RECORD SEQUENCE NUMBER: ##
***********************************************
@@SHORT 114
STATS DRIVE: ##, VOLID: ##, REASON: ##.
@@COMMON 114
Volume ID: ## Reason recorded: ##
Channel info(##): ## # ## on PI level ##
Device info(##): ##, ## ## PIA: ##
READS WRITES ##
TOTAL : %%%%%%%%%% %%%%%%%%%% %%%%%%%%%%
@@TAPE 114
NRZI : %%%%%%%%%% %%%%%%%%%%
PE : %%%%%%%%%% %%%%%%%%%%
GCR : %%%%%%%%%% %%%%%%%%%%
@@01_00
Extended sense data not updated
@@01_01
Extended sense data updated and contains something of interest
@@03_01
Command was issued with tape at BOT
@@03_02
Saw BOT indicator after tape motion started
@@03_03
ARA ID detected
@@11_01
TU is on-line but not ready (Possible when TU is manually rewound
or loading)
@@11_02
Fatal error has occurred and this command cannot be performed until
error status has been presented and a TM CLEAR received
@@11_03
Access to TU is allowed but TU is either rewinding or doing a DSE
from another MASSBUS or keypad command
@@15_01
No record found within 25 ft(7.6 m) of tape
@@15_02
ID Burst neither PE or GCR
@@15_03
ARA ID not found
@@15_04
No GAP found after ID Burst (PE) or ARA ID Burst (GCR)
@@20_00
Extended sense data not updated
@@20_01
Extended sense data updated and contains something of interest
@@21_00
Extended sense data not updated
@@21_01
Extended sense data updated and contains something of interest
@@22_01
CRC error, ACRC error, pointer mismatch, uncorrectable or two track
error set in ECCSTA register (This code generated by write GCR
operations)
@@22_02
CRC error, ACRC error, or uncorrectable set in ECCSTA register
(This code generated by read GCR operations)
@@22_03
Uncorrectable error set in ECCSTA register (This code generated
by read PE operations)
@@22_04
AMTIE, pointer mismatch, uncorrectable, two track error or single
track error set in ECCSTA register (This code generated by write PE
operations)
@@22_05
At least one bit set in ECCSTA register
@@22_06
At least one Write Fail bit set in RPFAIL and RPATH registers
(This code generated by write PE operations)
@@22_07
More than one Write Fail bit set in RPFAIL and RPATH registers
(This code generated by write GCR operations)
@@22_10
RSTAT contains bad code
@@22_11
CRC characters from WMC and RMC do not match (This code generated
by write PE operations)
@@22_12
MASSBUS data bus parity error
@@22_13
Record length incorrect during retry opposite attempt: invalid data
has been transferred
@@30_01
Illegal command code
@@30_02
Data transfer command issued while non-data transfer command in
progress on same tape unit
@@30_03
WMC error; check Encode register for reason. May be Illegal Format
or Skip Count codes
@@30_04
RUN not received`from MASSBUS controller
@@30_05
Command read from RMC register RCMLP did!not match command loaded
into RCMD register (This code generated in selected function
routine)
@@30_06
ECC ROM parity error
@@30_07
XMC ROM parity error
@@30_10
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code glnerated when Verify ID Burst
command loaded during write of BOT area)
@@30_11
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Verify ARA Burst
command loaded during write of BOT area)
@@30_12
Command read from RMC register RCMDP did not match command loaded
into RCMD register (This code generated when Verify ARA ID command
loaded during write of BOT area)
@@30_13
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Verify Gap command
loaded during write of BOT area)
@@30_14
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Read ID Burst command
loaded during read of BOT area)
@@30_15
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Verify ARA ID command
loaded during read of BOT area)
@@30_16
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Verify Gap command
loaded during read of BOT area)
@@30_17
Command read from RMC register RCMLP did not match command loaded
into RCMD register (This code generated when Find Gap command
loaded during Erase Gap routine)
@@30_20
WMC LEFT failed to set in Extended Sense routine
@@30_21
XL PE set in INTSTA register
@@30_22
XMC DONE did not set
@@30_23
WMC ROM PE or RD PE set in WMCERR register
@@31_01
TU Status parity error
@@31_02
TU Command parity error
@@31_03
Rewinding tape went off-line
@@31_04
Tape went not ready during DSE
@@31_05
TU CMD status changed during DSE
@@31_06
TU velocity never came up to speed
@@31_07
TU velocity changed after up to speed and writing started
@@31_10
TU CMD did not load correctly to start tape motion in selected
function routine
@@31_11
TU CMD did not load correctly to set drive density
@@31_12
TU CMD did not load correctly to set drive density
@@31_13
TU CMD did not load correctly to set drive density
@@31_14
Failed to write density ID Burst correctly
@@31_15
Failed to write ARA Burst correctly
@@31_16
Failed to write ARA ID correctly
@@31_17
ARA error bit set in MTA Status B register
@@31_20
unknown
@@31_21
Could not find a gap after the ID code was written correctly
@@31_22
TU CMD did not load correctly to start tape motion to read ID Burst
@@31_23
Time-out looking for BOT after detecting ARA ID Burst
@@31_24
Failed to write Tape Mark correctly
@@31_25
Tape never came up to speed while trying to reposition for retry of
writing Tape Mark
@@31_26
TU CMD did not load correctly to start tape motion in Erase Gap
routine
@@31_27
Could not detect a gap in Erase Gap routine
@@31_30
Could not detect a gap after writing record
@@31_31
Read path terminated before entire record was written
@@31_32
Could not find a gap after writing record and read path terminated
early
@@31_33
TU CMD did not load correctly to backup for retry of Write Tape Mark
@@31_34
TU Velocity changed after up to speed while trying to reposition
for retry of writing Tape Mark
@@31_35
TU CMD did not load correctly to backup to retry a read of BOT ID
@@31_36
Time-out looking for BOT after failing to write BOT ID
@@31_37
TU velocity changed while writing PE gap before starting to write
record
@@31_40
TU CMD did not load correctly to set PE tape density at start of
write BOT ID Burst
@@31_41
TU CMD did not load correctly to set GCR tape density after writing
Density ID
@@31_42
TU CMD did not load correctly to set PE tape density at start of
read from BOT
@@31_43
TU CMD did not load correctly to set GCR tape density after reading
a GCR Density ID Burst
@@32_00
RST0 interrupt occurred with TM RDY still set
@@32_01
Power failed to interrupt
@@32_02
Interrupt for unknown readon on channel 5.5
@@32_03
Interrupt for unknown readon on channel 6.5
@@32_04
Interrupt for unknown readon on channel 7
@@32_05
05 Interrupt for unknown readon on channel 7.5
@@32_06
CAS contention retry count expired
@@32_07
CAS Contention error not retryable
@@32_10
Queue error; could not find queue entry
@@32_11
Queue entry already full
@@32_12
8085 ROM parity error
@@32_13
In-line test 0; WMC self test failed = M8959-M8957
@@32_14
In-line test 1; XMC ROM parity error M8958-M8959-M8960
@@32_15
In-line test 2; RPM self test failed M8953-M8960
@@32_16
In-line test 3; RPM1 channel 0 self test failure M8950 (slot AB12)
@@32_!7
In-line ueSt 4; RPM1 channel 1 self test failure M8950 (slot AB13)
@@32_20
In-line test 5; RPM1 channel 2 self test failure M8950 (slot AB14)
@@32_21
In-line test 6; RPM1 channel 3 self test failure M8950 (slot AB15)
@@32_22
In-line test 7; RPM1 channel 4 self test failure M8950 (slot AB16)
@@32_23
In-line test 10; RPM1 channel 5 self test failure M8950 (slot CD13)
@@32_24
In-line test 11; RPM1 channel 6 self test failure M8950 (slot CD14)
@@32_25
In-line test 12; RPM1 channel 7 self test failure M8950 (slot CD15)
@@32_26
In-line test 13; RPM1 channel P self test failure M8950 (slot CD16)
@@32_27
In-line test 14; RPM1 error correction self test M8950-M8951-M8953
@@32_30
In-line test 15; 40000-40777 RAM memory failure M8960
@@32_31
In-line test 16; 41000-41777 RAM memory failure M8960
@@32_32
In-line test 17; 42000-42777 RAM memory failure M8960
@@32_33
In-line test 20; 43000-43777 RAM memory failure M8960
@@32_34
In-line test 21; 44000-44777 RAM memory failure M8960
@@32_35
In-line test 22; 45000-45777 RAM memory failure M8960
@@32_36
In-line test 23; 46000-46777 RAM memory failure M8960
@@32_37
In-line test 24; 47000-47777 RAM memory failure M8960
@@32_40
In-line test 25; loop write to read at TU port 0 - GCR
@@32_41
In-line test 26; loop write to read at TU port 0 - PE
@@32_42
In-line test 27; loop write to read at TU port 1 - GCR
@@32_43
In-line test 30; loop write to read at TU port 1 - PE
@@32_44
In-line test 31; loop write to read at TU port 2 - GCR
@@32_45
In-line test 32; loop write to read at TU port 2 - PE
@@32_46
In-line test 33; loop write to read at TU port 3 - GCR
@@32_47
In-line test 34; loop write to read at TU port 3 - PE
@@32_50
In-line test 35; loop write to read at MTA 0 - GCR
@@32_51
In-line test 36; loop write to read at MTA 0 - PE
@@32_52
In-line test 37; loop write to read at MTA 1 - GCR
@@32_53
In-line test 40; loop write to read at MTA 1 - PE
@@32_54
In-line test 41; loop write to read at MTA 2 - GCR
@@32_55
In-line test 42; loop write to read at MTA 2 - PE
@@32_56
In-line test 43; loop write to read at MTA 3 - GCR
@@32_57
In-line test 44; loop write to read at MTA 3 - PE
@@34_01
Control bus parity error
@@34_02
Illegal register referenced
@@77_01
Keypad entry error
@@77_02
TM78 not off-line
@@77_03
Illegal instruction code
@@77_04
Microdiagnostic start or continue command issued
@@77_05
Microdiagnostic loop on error command issued
@@UNKNOWN TU78
UNEXPECTED combination -- interrupt code: ##
failure code: ##
@@
Reference in New Issue View Git Blame Copy Permalink