github.com/PDP-10.stacken
1
0
Fork 0
mirror of https://github.com/PDP-10/stacken.git synced 2026-02-15 12:16:07 +00:00
Code Issues Projects Releases Wiki Activity
Files
6e18f5ebefd9acb0d718ef31a08f33a60fc9fca2
PDP-10.stacken/files/stacken-tape-backup/dskb:10_7/mon/ctls/gen.ctl
Lars Brinkhoff 6e18f5ebef Extract files from tape images. 
Some tapes could not be extracted.
2021-01-29 10:47:33 +01:00

1213 lines
27 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
;***************************************************************************
;GEN -- Master MONGEN dialog control file
;
;Unless otherwise stated, all monitors include the following, excepting of
;course any hardware limitations due to processor type:
; All disk drivers
; All printer drivers
; All magtape drivers
; ANF-10
; DECnet-10
; DECtape service
; Ethernet
; IBM commumications
; KA10 floating point simulation
; LAT service
;***************************************************************************
.DECLARE@BUILDS.DCL
;Standard KL "Features" MONGEN dialog
MKL::
.PA =KL:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*F ;Feature test dialog
*F ;File name
*KL10 ;Option
*YES ;Standard switch settings
=^Z
;Standard/FTMP=0 KL "Features" MONGEN dialog
MKLF::
.PA =KLF:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*F ;Feature test dialog
*F ;File name
*KL10 ;Option
*NO ;Standard switch settings
*MP,OFF ;No multiprocessor support
*
=^Z
;Standard KS "Features" MONGEN dialog
MKS::
.PA =KS:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*F ;Feature test dialog
*F ;File name
*KS10 ;Option
*Y ;Standard switch settings
=^Z
;KL1322 "RA" MONGEN dialog
;
; Standalone KL monitor
M1322A::
.PA =A:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*SYS ;Hardware dialog
* ;File name
*KL ;Processor type
*1 ;# of CPUs
*RA### DEC10 Development
*1322 ;CPU0 serial number
*Y ;Exclude monitor overhead ?
*Y ;EBOX/MBOX runtime accounting ?
*Y ;Exclude PI time ?
*N ;Account verification ?
*Y ;MOS memory?
*YES ;SCA support?
*YES ;Ethernet support?
*NO ;SA10s
*NO ;RP03s
*NO ;Drums
*NO ;RS04s
*NO ;RPXKON (prompt)
*NO ;RNXKON
*YES ;RAXKON
*YES ;TM2KON
*YES ;TX1KON
*YES ;TD2KON
*YES ;T78KON
*NO ;TM10Bs
*NO ;TC10Cs
*YES ;LPTSER
*NO ;DLPSER
*NO ;PLTSER
*NO ;CDRSER
*NO ;DCRSER
*YES ;CDPSER
*YES ;PTPSER
*YES ;PTRSER
*Y ;D8SINT
*Y ;D6SINT
*Y ;MCB
*NO ;DC10
*16 ;M0TTDN
*CTY ;OPR
* ;Data set lines
*40 ;Jobs
* ;Pages core/user
*2048 ;Total core
*4 ;Real time devices
*10 ;Core for non-locking jobs
*50 ;Pages of EVM
*15 ;# HPQs
*NO ;METER
*Y ;KASER ?
*Y ;MPXSER ?
*Y ;PSISER ?
*Y ;IPCSER ?
*Y ;ENQ/DEQ ?
*10 ;Disk set
*NO ;Device loop
*20 ;# PTYs
*Y ;Networks supported ?
;Central site name
*KL1322
*20 ;# remote TTYs
*YES ;ANF-10 software?
* ;Default node name
*10 ;Node number
*YES ;SET HOST inbound
*YES ;Network virtual terminals ?
*YES ;CDRs ?
*YES ;LPTs ?
*NO ;PTP
*NO ;PTR
*NO ;PLT
*YES ;DDPs ?
*YES ;RDXs ?
*YES ;TSKs ?
*50 ;# of devices that can be connected
*YES ;DECnet software?
* ;Default node name
*7 ;DECnet area number
*169 ;DECnet node number
*ROUTING;DECnet router type
* ;Default xmit password
*YES ;NRTSER
*YES ;LAT software?
* ;Default service name
* ;Maximum number of LAT circuits
* ;Default to no service groups
*TTDMOS,96 ;Make -20F strings longer
*MSGMAX,596 ;Large network message size to accomodate DECnetwork
*FLCDEF,0 ;Default filler class
*TTYWID,80 ;default tty width
*TTCHKS,8 ;Larger tty chunk size
*TTYLCT,0 ;TTY LC
*%RTBEA,512 ;Maximum DECnet broadcast endnode adjacencies
*%DLBSZ,1476 ;Maximum DECnet message size on ethernet
* ;End decimal value definitions
*CHGPPP,<20040,,0> ;Poke or Admin privs to do CHGPPN
*PRVPRV,<^-40,,0> ;No admin privs for automatic jobs
*PRVFIL,055
*RTCH1,1
*MTDLTP,0 ;Standard magtape labels are bypass
*ANFNIP,60026 ;ANF Ethernet protocol 60-16
*M.EDIT,1 ;Enable TTY EDITOR
*M.DNMX,140000 ;Maximum for DECnet freecore
* ;End octal value definitions
* ;End SIXBIT value definitions
* ;DEV,PI
* ;DEV,PI,#
* ;DEV,PI,AC
* ;End user defined ersatz device names
*PIVOT,,RUNFLG,,
*PATH,,RUNFLG,UNIQ.2,
*<<>,PATH,RUNFLG!APPFLG,,
*<=>,PATH,RUNFLG!APPFLG,,
*<>>,PATH,RUNFLG!APPFLG,,
*WHO,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,WHO
*LINE,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,
*STRUCT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*UNIT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*NCOPY,#RUNNFT,RUNFLG,,
*NDELET,#RUNNFT,RUNFLG,,
*NDIREC,#RUNNFT,RUNFLG,,
*NMOVE,#RUNNFT,RUNFLG,,
*NRENAM,#RUNNFT,RUNFLG,,
*NREVIE,#RUNNFT,RUNFLG,,
*NTYPE,#RUNNFT,RUNFLG,,
*TLINK,#RUNNFT,RUNFLG,,
*TRANSL,,RUNFLG!APPFLG,,
*TYLOG,,RUNFLG!APPFLG,,
*FMAINT,,RUNFLG,,
* ;End user defined commands
*DUMB ;NEW CLASS
*80 ;WIDTH
*0 ;LENGTH
*0 ;FILL
*XON,CRLF,LC ;BITS
*0 ;TABLE ADDRESSES
*0
*0 ;CONFORMANCE LEVELS
*0
* ;NO ATTRIBUTES
* ;NO MEMBER TYPES
* ;DONE DEFINING CLASSES
*VT52 ;CLASS TO EXTEND
*H19 ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT52
*VT100 ;CLASS TO EXTEND
*H19A ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT100
*VT200 ;CLASS TO EXTEND
*DAS21A ;NEW MEMBER TYPE
* ;ADD NO BITS
*VFW ;NO 132-COLUMN MODE
* ;DONE EXTENDING VT200
* ;DONE EXTENDING CLASSES
*DUMB ;DEFAULT TTY TYPE FOR SYSTEM
=^Z
;KL1322 "RB" MONGEN dialog
;
; Standard KL single-processor
; No networks
M1322B::
.PA =B:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*SYS ;Hardware dialog
* ;File name
*KL ;Processor type
*1 ;# of CPUs
*RB### DEC10 Development
*1322 ;CPU0 serial number
*Y ;Exclude monitor overhead ?
*Y ;EBOX/MBOX runtime accounting ?
*Y ;Exclude PI time ?
*N ;Account verification ?
*Y ;MOS memory?
*YES ;SCA support?
*NO ;Ethernet support
*NO ;SA10s
*NO ;RP01
*NO ;DRUMS
*NO ;RS04
*NO ;RPXKON (prompt)
*NO ;RNXKON
*YES ;RAXKON
*YES ;TM2KON
*YES ;TX1KON
*YES ;TD2KON
*YES ;T78KON
*NO ;TM10B
*NO ;TC10C
*YES ;LPTSER
*NO ;DLPSER
*NO ;PLTSER
*NO ;CDRSER
*NO ;DCRSER
*YES ;CDPSER
*YES ;PTPSER
*YES ;PTRSER
*N ;D8SINT
*N ;D6SINT
*N ;MCB
*NO ;DC10
*16 ;M0TTDN
*CTY ;OPR
* ;Data set lines
*40 ;Jobs
* ;Pages core/user
*2048 ;Total core
*4 ;Real time devices
*10 ;Core for non-locking jobs
*50 ;Pages of EVM
*15 ;# HPQs
*NO ;METER
*Y ;KASER ?
*Y ;MPXSER ?
*Y ;PSISER ?
*Y ;IPCSER ?
*Y ;ENQ/DEQ ?
*10 ;Disk set
*NO ;Device loop
*20 ;# PTYs
*N ;Network support
*TTDMOS,96 ;Make -20F strings longer
*MSGMAX,596 ;Large network message size to accomodate DECnetwork
*FLCDEF,0 ;Default filler class
*TTYWID,80 ;default tty width
*TTCHKS,8 ;Larger tty chunk size
*TTYLCT,0 ;TTY LC
* ;End decimal value definitions
*CHGPPP,<20040,,0> ;Poke or Admin privs to do CHGPPN
*PRVPRV,<^-40,,0> ;No admin privs for automatic jobs
*PRVFIL,055
*RTCH1,1
*MTDLTP,0 ;Standard magtape labels are bypass
*M.EDIT,1 ;Enable TTY EDITOR
* ;End octal value definitions
* ;End SIXBIT value definitions
* ;DEV,PI
* ;DEV,PI,#
* ;DEV,PI,AC
*MDC,5,100,SYS ;Local ersatz device names (Monitor DoCumentation)
*ASG,66,3024,JOB ;SPR transfer area (DSKB: only)
* ;End user defined ersatz device names
*PIVOT,,RUNFLG,,
*PATH,,RUNFLG,UNIQ.2,
*<<>,PATH,RUNFLG!APPFLG,,
*<=>,PATH,RUNFLG!APPFLG,,
*<>>,PATH,RUNFLG!APPFLG,,
*WHO,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,WHO
*LINE,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,
*STRUCT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*UNIT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*NCOPY,#RUNNFT,RUNFLG,,
*NDELET,#RUNNFT,RUNFLG,,
*NDIREC,#RUNNFT,RUNFLG,,
*NMOVE,#RUNNFT,RUNFLG,,
*NRENAM,#RUNNFT,RUNFLG,,
*NREVIE,#RUNNFT,RUNFLG,,
*NTYPE,#RUNNFT,RUNFLG,,
*TLINK,#RUNNFT,RUNFLG,,
*TRANSL,,RUNFLG!APPFLG,,
*TYLOG,,RUNFLG!APPFLG,,
*FMAINT,,RUNFLG,,
* ;End user defined commands
*DUMB ;NEW CLASS
*80 ;WIDTH
*0 ;LENGTH
*0 ;FILL
*XON,CRLF,LC ;BITS
*0 ;TABLE ADDRESSES
*0
*0 ;CONFORMANCE LEVELS
*0
* ;NO ATTRIBUTES
* ;NO MEMBER TYPES
* ;DONE DEFINING CLASSES
*VT52 ;CLASS TO EXTEND
*H19 ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT52
*VT100 ;CLASS TO EXTEND
*H19A ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT100
*VT200 ;CLASS TO EXTEND
*DAS21A ;NEW MEMBER TYPE
* ;ADD NO BITS
*VFW ;NO 132-COLUMN MODE
* ;DONE EXTENDING VT200
* ;DONE EXTENDING CLASSES
*DUMB ;DEFAULT TTY TYPE FOR SYSTEM
=^Z
M2476F::
.PA =F:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*SYS ;Hardware dialog
* ;File name
*KL ;Processor type
*1 ;# of CPUs
*RF### DEC10 Development
*2476 ;CPU0 serial number
*Y ;Exclude monitor overhead ?
*Y ;EBOX/MBOX runtime accounting ?
*Y ;Exclude PI time ?
*Y ;Account verification ?
*Y ;MOS memory?
*YES ;SCA support?
*YES ;Ethernet support
*NO ;SA10s
*NO ;RP01
*NO ;DRUMS
*NO ;RS04
*NO ;RPXKON (Prompt)
*NO ;RNXKON
*YES ;RAXKON
*YES ;TM2KON
*NO ;TX1KON
*NO ;TD2KON
*YES ;T78KON
*NO ;TM10B
*NO ;TC10C
*NO ;LPTSER
*YES ;DLPSER
*NO ;PLTSER
*NO ;CDRSER
*NO ;DCRSER
*N ;CDPSER
*N ;PTPSER
*N ;PTRSER
*N ;D8SINT
*Y ;D6SINT
*N ;MCB
*NO ;DC10
*16 ;M0TTDN
*CTY ;OPR
* ;Data set lines
*50 ;Jobs
* ;Pages core/user
*2048 ;Total core
*4 ;Real time devices
*10 ;Core for non-locking jobs
*50 ;Pages of EVM
*15 ;# HPQs
*NO ;METER
*Y ;KASER ?
*Y ;MPXSER ?
*Y ;PSISER ?
*Y ;IPCSER ?
*Y ;ENQ/DEQ ?
*6 ;Disk set
*NO ;Device loop
*20 ;# PTYs
*Y ;Networks supported ?
;Central site name
*KL2476
*100 ;# remote TTYs
*YES ;ANF-10 software?
* ;Default node name
*67 ;Node number
*YES ;SET HOST inbound
*YES ;Network virtual terminals ?
*YES ;CDRs ?
*YES ;LPTs ?
*NO ;PTP
*NO ;PTR
*NO ;PLT
*YES ;DDPs ?
*YES ;RDXs ?
*YES ;TSKs ?
*50 ;# of devices that can be connected
*YES ;DECnet software?
* ;Default node name
*7 ;DECnet area number
*80 ;DECnet node number
*ROUTING;DECnet router type
* ;Default xmit password
*YES ;NRTSER
*YES ;LAT software?
* ;Default service name
* ;Maximum number of LAT circuits
*3-4,7,10,18,29,45-46 ;Service groups enabled
*TTDMOS,96 ;Make -20F strings longer
*MSGMAX,596 ;Large network message size to accomodate DECnetwork
*M.CBMX,400 ;Big disk cache for big SIRS ufds
*FLCDEF,0 ;Default filler class
*TTYWID,80 ;default tty width
*TTCHKS,8 ;Larger tty chunk size
*TTYLCT,0 ;TTY LC
*%RTBEA,512 ;Maximum DECnet broadcast endnode adjacencies
*%DLBSZ,1476 ;Maximum DECnet message size on ethernet
* ;End decimal value definitions
*CHGPPP,<20040,,0> ;Poke or Admin privs to do CHGPPN
*PRVPRV,<^-40,,0> ;No admin privs for automatic jobs
*PRVFIL,055
*RTCH1,1
*MTDLTP,0 ;Standard magtape labels are bypass
*ANFNIP,60026 ;ANF Ethernet protocol 60-16
*M.EDIT,1 ;Enable TTY EDITOR
*M.DNMX,140000 ;Maximum for DECnet freecore
* ;End octal value definitions
* ;End SIXBIT value definitions
* ;DEV,PI
* ;DEV,PI,#
* ;DEV,PI,AC
*MDC,5,100,SYS ;Local ersatz device names (Monitor DoCumentation)
*ASG,66,3024,JOB ;SPR transfer area (DSKB: only)
* ;End user defined ersatz device names
*PIVOT,,RUNFLG,,
*PATH,,RUNFLG,UNIQ.2,
*<<>,PATH,RUNFLG!APPFLG,,
*<=>,PATH,RUNFLG!APPFLG,,
*<>>,PATH,RUNFLG!APPFLG,,
*WHO,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,WHO
*LINE,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,
*STRUCT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*UNIT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*NCOPY,#RUNNFT,RUNFLG,,
*NDELET,#RUNNFT,RUNFLG,,
*NDIREC,#RUNNFT,RUNFLG,,
*NMOVE,#RUNNFT,RUNFLG,,
*NRENAM,#RUNNFT,RUNFLG,,
*NREVIE,#RUNNFT,RUNFLG,,
*NTYPE,#RUNNFT,RUNFLG,,
*TLINK,#RUNNFT,RUNFLG,,
*TRANSL,,RUNFLG!APPFLG,,
*TYLOG,,RUNFLG!APPFLG,,
*FMAINT,,RUNFLG,,
* ;End user defined commands
*DUMB ;NEW CLASS
*80 ;WIDTH
*0 ;LENGTH
*0 ;FILL
*XON,CRLF,LC ;BITS
*0 ;TABLE ADDRESSES
*0
*0 ;CONFORMANCE LEVELS
*0
* ;NO ATTRIBUTES
* ;NO MEMBER TYPES
* ;DONE DEFINING CLASSES
*VT52 ;CLASS TO EXTEND
*H19 ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT52
*VT100 ;CLASS TO EXTEND
*H19A ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT100
*VT200 ;CLASS TO EXTEND
*DAS21A ;NEW MEMBER TYPE
* ;ADD NO BITS
*VFW ;NO 132-COLUMN MODE
* ;DONE EXTENDING VT200
* ;DONE EXTENDING CLASSES
*DUMB ;DEFAULT TTY TYPE FOR SYSTEM
=^Z
;KL1322 "RK" MONGEN dialog
;
; KLAD-10 KL monitor
MKLAD::
.PA =K:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*SYS ;Hardware dialog
* ;File name
*KL ;Processor type
*1 ;# of CPUs
*RK### DEC10 Development
*1 ;CPU0 serial number
*Y ;Exclude monitor overhead ?
*Y ;EBOX/MBOX runtime accounting ?
*Y ;Exclude PI time ?
*N ;Account verification ?
*Y ;MOS memory?
*YES ;SCA support?
*YES ;Ethernet support?
*NO ;SA10s
*NO ;RP03s
*NO ;Drums
*NO ;RS04s
*NO ;RPXKON (prompt)
*YES ;RNXKON
*YES ;RAXKON
*YES ;TM2KON
*YES ;TX1KON
*YES ;TD2KON
*YES ;T78KON
*NO ;TM10Bs
*NO ;TC10Cs
*YES ;LPTSER
*YES ;DLPSER
*YES ;PLTSER
*YES ;CDRSER
*YES ;DCRSER
*YES ;CDPSER
*YES ;PTPSER
*YES ;PTRSER
*Y ;D8SINT
*Y ;D6SINT
*Y ;MCB
*NO ;DC10
*16 ;M0TTDN
*CTY ;OPR
* ;Data set lines
*40 ;Jobs
* ;Pages core/user
*2048 ;Total core
*4 ;Real time devices
*10 ;Core for non-locking jobs
*50 ;Pages of EVM
*15 ;# HPQs
*NO ;METER
*Y ;KASER ?
*Y ;MPXSER ?
*Y ;PSISER ?
*Y ;IPCSER ?
*Y ;ENQ/DEQ ?
*36 ;Disk set
*NO ;Device loop
*20 ;# PTYs
*Y ;Networks supported ?
;Central site name
*KLAD10
*20 ;# remote TTYs
*YES ;ANF-10 software?
* ;Default node name
*36 ;Node number
*YES ;SET HOST inbound
*YES ;Network virtual terminals ?
*YES ;CDRs ?
*YES ;LPTs ?
*NO ;PTP
*NO ;PTR
*NO ;PLT
*YES ;DDPs ?
*YES ;RDXs ?
*YES ;TSKs ?
*50 ;# of devices that can be connected
*YES ;DECnet software?
* ;Default node name
*7 ;DECnet area number
*236 ;DECnet node number
*ROUTING;DECnet router type
* ;Default xmit password
*YES ;NRTSER
*YES ;LAT software?
* ;Default service name
* ;Maximum number of LAT circuits
* ;Default to no service groups
*TTDMOS,96 ;Make -20F strings longer
*MSGMAX,596 ;Large network message size to accomodate DECnetwork
*FLCDEF,0 ;Default filler class
*TTYWID,80 ;default tty width
*TTCHKS,8 ;Larger tty chunk size
*TTYLCT,0 ;TTY LC
*%RTBEA,512 ;Maximum DECnet broadcast endnode adjacencies
*%DLBSZ,1476 ;Maximum DECnet message size on ethernet
* ;End decimal value definitions
*PRVPRV,<^-40,,0> ;No admin privs for automatic jobs
*PRVFIL,055
*RTCH1,1
*MTDLTP,0 ;Standard magtape labels are bypass
*ANFNIP,60026 ;ANF Ethernet protocol 60-16
*M.EDIT,1 ;Enable TTY EDITOR
*M.DNMX,140000 ;Maximum for DECnet freecore
* ;End octal value definitions
* ;End SIXBIT value definitions
* ;DEV,PI
* ;DEV,PI,#
* ;DEV,PI,AC
* ;End user defined ersatz device names
*PIVOT,,RUNFLG,,
*PATH,,RUNFLG,UNIQ.2,
*<<>,PATH,RUNFLG!APPFLG,,
*<=>,PATH,RUNFLG!APPFLG,,
*<>>,PATH,RUNFLG!APPFLG,,
*WHO,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,WHO
*LINE,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,
*STRUCT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*UNIT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*NCOPY,#RUNNFT,RUNFLG,,
*NDELET,#RUNNFT,RUNFLG,,
*NDIREC,#RUNNFT,RUNFLG,,
*NMOVE,#RUNNFT,RUNFLG,,
*NRENAM,#RUNNFT,RUNFLG,,
*NREVIE,#RUNNFT,RUNFLG,,
*NTYPE,#RUNNFT,RUNFLG,,
*TLINK,#RUNNFT,RUNFLG,,
*TRANSL,,RUNFLG!APPFLG,,
*TYLOG,,RUNFLG!APPFLG,,
*FMAINT,,RUNFLG,,
* ;End user defined commands
*DUMB ;NEW CLASS
*80 ;WIDTH
*0 ;LENGTH
*0 ;FILL
*XON,CRLF,LC ;BITS
*0 ;TABLE ADDRESSES
*0
*0 ;CONFORMANCE LEVELS
*0
* ;NO ATTRIBUTES
* ;NO MEMBER TYPES
* ;DONE DEFINING CLASSES
*VT52 ;CLASS TO EXTEND
*H19 ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT52
*VT100 ;CLASS TO EXTEND
*H19A ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT100
*VT200 ;CLASS TO EXTEND
*DAS21A ;NEW MEMBER TYPE
* ;ADD NO BITS
*VFW ;NO 132-COLUMN MODE
* ;DONE EXTENDING VT200
* ;DONE EXTENDING CLASSES
*DUMB ;DEFAULT TTY TYPE FOR SYSTEM
=^Z
;KL1026 "RL" MONGEN dialog
;
; Standard KL triple-processor
; DECtapes
; KA10 floating point simulation
M1026L::
.PA =L:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*SYS ;Hardware dialog
* ;File name
*KL ;Processor type
*3 ;# of CPUs
*RL### DEC10 Development
*1026 ;CPU0 serial number
*1042 ;CPU1 serial number
*1322 ;CPU2 serial number
*Y ;Exclude monitor overhead ?
*Y ;EBOX/MBOX runtime accounting ?
*Y ;Exclude PI time ?
*Y ;Account verification ?
*Y ;MOS memory?
*YES ;SCA support?
*YES ;Ethernet support
*NO ;SA10s
*NO ;RP01
*NO ;DRUMS
*NO ;RS04
*YES ;RPXKON (Prompt)
*2,2,2 ;Kontrollers per CPU
*NO ;Done
*NO ;RNXKON
*YES ;RAXKON
*PROMPT ;TM2KON
*1,1,2 ;Kontrollers per CPU
*NO ;DONE
*YES ;TX1KON
*YES ;TD2KON
*YES ;T78KON
*NO ;TM10B
*NO ;TC10C
*PROMPT ;LPTSER
*0,1,0 ;Per-CPU reservations
*NO ;DONE
*NO ;DLPSER
*NO ;PLTSER
*NO ;CDRSER
*NO ;DCRSER
*PROMPT ;CDPSER
*0,0,1 ;DEVICES PER CPU
*NO ;DONE
*PROMPT ;PTPSER
*0,0,1 ;DEVICES PER CPU
*NO ;DONE
*PROMPT ;PTRSER
*0,0,1 ;DEVICES PER CPU
*NO ;DONE
*Y ;D8SINT
*Y ;D6SINT
*Y ;MCB
*NO ;DC10
*16 ;M0TTDN
*16 ;M1TTDN
*16 ;M2TTDN
*CTY ;OPR
* ;Data set lines
*100 ;Jobs
* ;Pages core/user
*2048 ;Total core
*4 ;Real time devices
*10 ;Core for non-locking jobs
*50 ;Pages of EVM
*15 ;# HPQs
*NO ;METER
*Y ;KASER ?
*Y ;MPXSER ?
*Y ;PSISER ?
*Y ;IPCSER ?
*Y ;ENQ/DEQ ?
*26 ;Disk set
*YES ;Device loop
*NO ;DIS device
*0 ;# TD10s
*0 ;DA28s
*0 ;DAS78s
*0 ;DN60s
*0 ;DN87s
*1 ;# TD10s
*4 ;# DTAs
*0 ;# TD10s
*20 ;# PTYs
*Y ;Networks supported ?
;Central site name
*KL1026
*50 ;# remote TTYs
*YES ;ANF-10 software?
* ;Default node name
*26 ;Node number
*YES ;SET HOST inbound
*YES ;Network virtual terminals ?
*YES ;CDRs ?
*YES ;LPTs ?
*NO ;PTP
*NO ;PTR
*NO ;PLT
*YES ;DDPs ?
*YES ;RDXs ?
*YES ;TSKs ?
*250 ;# of devices that can be connected
*YES ;DECnet software?
* ;Default node name
*7 ;DECnet area number
*110 ;DECnet node number
*NONROUTING;DECnet router type
* ;Default xmit password
*YES ;NRTSER
*YES ;LAT software?
* ;Default service name
* ;Maximum number of LAT circuits
*3-4,7,10,18,29,45-46 ;Service groups enabled
*TTDMOS,96 ;Make -20F strings longer
*MSGMAX,596 ;Large network message size to accomodate DECnetwork
*M.CBMX,400 ;Big disk cache for big SIRS ufds
*FLCDEF,0 ;Default filler class
*TTYWID,80 ;default tty width
*TTCHKS,8 ;Larger tty chunk size
*TTYLCT,0 ;TTY LC
*%RTBEA,512 ;Maximum DECnet broadcast endnode adjacencies
*%DLBSZ,1476 ;Maximum DECnet message size on ethernet
* ;End decimal value definitions
*CHGPPP,<20040,,0> ;Poke or Admin privs to do CHGPPN
*PRVPRV,<^-40,,0> ;No admin privs for automatic jobs
*PRVFIL,055
*RTCH1,1
*MTDLTP,0 ;Standard magtape labels are bypass
*ANFNIP,60026 ;ANF Ethernet protocol 60-16
*M.EDIT,1 ;Enable TTY EDITOR
*M.DNMX,140000 ;Maximum for DECnet freecore
* ;End octal value definitions
* ;End SIXBIT value definitions
* ;DEV,PI
* ;DEV,PI,#
* ;DEV,PI,AC
*MDC,5,100,SYS ;Local ersatz device names (Monitor DoCumentation)
*ASG,66,3024,JOB ;SPR transfer area (DSKB: only)
* ;End user defined ersatz device names
*PIVOT,,RUNFLG,,
*PATH,,RUNFLG,UNIQ.2,
*<<>,PATH,RUNFLG!APPFLG,,
*<=>,PATH,RUNFLG!APPFLG,,
*<>>,PATH,RUNFLG!APPFLG,,
*WHO,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,WHO
*LINE,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,
*STRUCT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*UNIT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*NCOPY,#RUNNFT,RUNFLG,,
*NDELET,#RUNNFT,RUNFLG,,
*NDIREC,#RUNNFT,RUNFLG,,
*NMOVE,#RUNNFT,RUNFLG,,
*NRENAM,#RUNNFT,RUNFLG,,
*NREVIE,#RUNNFT,RUNFLG,,
*NTYPE,#RUNNFT,RUNFLG,,
*TLINK,#RUNNFT,RUNFLG,,
*TRANSL,,RUNFLG!APPFLG,,
*TYLOG,,RUNFLG!APPFLG,,
*FMAINT,,RUNFLG,,
* ;End user defined commands
*DUMB ;NEW CLASS
*80 ;WIDTH
*0 ;LENGTH
*0 ;FILL
*XON,CRLF,LC ;BITS
*0 ;TABLE ADDRESSES
*0
*0 ;CONFORMANCE LEVELS
*0
* ;NO ATTRIBUTES
* ;NO MEMBER TYPES
* ;DONE DEFINING CLASSES
*VT52 ;CLASS TO EXTEND
*H19 ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT52
*VT100 ;CLASS TO EXTEND
*H19A ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT100
*VT200 ;CLASS TO EXTEND
*DAS21A ;NEW MEMBER TYPE
* ;ADD NO BITS
*VFW ;NO 132-COLUMN MODE
* ;DONE EXTENDING VT200
* ;DONE EXTENDING CLASSES
*DUMB ;DEFAULT TTY TYPE FOR SYSTEM
=^Z
;KL2476 "RP" MONGEN dialog
;
; Single processor Autopatch monitor
; CI disks
; Front end printers
; Massbus disks
; No DECtapes
; TM02/TM03 magtapes
; TM78 magtapes
M2476P::
.PA =P:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*SYS ;Hardware dialog
* ;File name
*KL ;Processor type
*1 ;# of CPUs
*RP### DEC10 Development
*2476 ;CPU0 serial number
*Y ;Exclude monitor overhead ?
*Y ;EBOX/MBOX runtime accounting ?
*Y ;Exclude PI time ?
*Y ;Account verification ?
*Y ;MOS memory?
*YES ;SCA support?
*YES ;Ethernet support
*NO ;SA10s
*NO ;RP01
*NO ;DRUMS
*NO ;RS04
*NO ;RPXKON (Prompt)
*NO ;RNXKON
*YES ;RAXKON
*YES ;TM2KON
*NO ;TX1KON
*NO ;TD2KON
*YES ;T78KON
*NO ;TM10B
*NO ;TC10C
*NO ;LPTSER
*YES ;DLPSER
*NO ;PLTSER
*NO ;CDRSER
*NO ;DCRSER
*N ;CDPSER
*N ;PTPSER
*N ;PTRSER
*N ;D8SINT
*Y ;D6SINT
*N ;MCB
*NO ;DC10
*16 ;M0TTDN
*CTY ;OPR
* ;Data set lines
*50 ;Jobs
* ;Pages core/user
*2048 ;Total core
*4 ;Real time devices
*10 ;Core for non-locking jobs
*50 ;Pages of EVM
*15 ;# HPQs
*NO ;METER
*Y ;KASER ?
*Y ;MPXSER ?
*Y ;PSISER ?
*Y ;IPCSER ?
*Y ;ENQ/DEQ ?
*6 ;Disk set
*NO ;Device loop
*20 ;# PTYs
*Y ;Networks supported ?
;Central site name
*KL2476
*100 ;# remote TTYs
*YES ;ANF-10 software?
* ;Default node name
*67 ;Node number
*YES ;SET HOST inbound
*YES ;Network virtual terminals ?
*YES ;CDRs ?
*YES ;LPTs ?
*NO ;PTP
*NO ;PTR
*NO ;PLT
*YES ;DDPs ?
*YES ;RDXs ?
*YES ;TSKs ?
*50 ;# of devices that can be connected
*YES ;DECnet software?
* ;Default node name
*7 ;DECnet area number
*80 ;DECnet node number
*ROUTING;DECnet router type
* ;Default xmit password
*YES ;NRTSER
*YES ;LAT software?
* ;Default service name
* ;Maximum number of LAT circuits
*3-4,7,10,18,29,45-46 ;Service groups enabled
*TTDMOS,96 ;Make -20F strings longer
*MSGMAX,596 ;Large network message size to accomodate DECnetwork
*M.CBMX,400 ;Big disk cache for big SIRS ufds
*FLCDEF,0 ;Default filler class
*TTYWID,80 ;default tty width
*TTCHKS,8 ;Larger tty chunk size
*TTYLCT,0 ;TTY LC
*%RTBEA,512 ;Maximum DECnet broadcast endnode adjacencies
*%DLBSZ,1476 ;Maximum DECnet message size on ethernet
* ;End decimal value definitions
*CHGPPP,<20040,,0> ;Poke or Admin privs to do CHGPPN
*PRVPRV,<^-40,,0> ;No admin privs for automatic jobs
*PRVFIL,055
*RTCH1,1
*MTDLTP,0 ;Standard magtape labels are bypass
*ANFNIP,60026 ;ANF Ethernet protocol 60-16
*M.EDIT,1 ;Enable TTY EDITOR
*M.DNMX,140000 ;Maximum for DECnet freecore
* ;End octal value definitions
* ;End SIXBIT value definitions
* ;DEV,PI
* ;DEV,PI,#
* ;DEV,PI,AC
*MDC,5,100,SYS ;Local ersatz device names (Monitor DoCumentation)
*ASG,66,3024,JOB ;SPR transfer area (DSKB: only)
* ;End user defined ersatz device names
*PIVOT,,RUNFLG,,
*PATH,,RUNFLG,UNIQ.2,
*<<>,PATH,RUNFLG!APPFLG,,
*<=>,PATH,RUNFLG!APPFLG,,
*<>>,PATH,RUNFLG!APPFLG,,
*WHO,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,WHO
*LINE,WHO,RUNFLG!NOLOGIN!APPFLG,UNIQ.1!UNIQ.2,
*STRUCT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*UNIT,WHO,RUNFLG!NOLOGIN!APPFLG,,
*NCOPY,#RUNNFT,RUNFLG,,
*NDELET,#RUNNFT,RUNFLG,,
*NDIREC,#RUNNFT,RUNFLG,,
*NMOVE,#RUNNFT,RUNFLG,,
*NRENAM,#RUNNFT,RUNFLG,,
*NREVIE,#RUNNFT,RUNFLG,,
*NTYPE,#RUNNFT,RUNFLG,,
*TLINK,#RUNNFT,RUNFLG,,
*TRANSL,,RUNFLG!APPFLG,,
*TYLOG,,RUNFLG!APPFLG,,
*FMAINT,,RUNFLG,,
* ;End user defined commands
*DUMB ;NEW CLASS
*80 ;WIDTH
*0 ;LENGTH
*0 ;FILL
*XON,CRLF,LC ;BITS
*0 ;TABLE ADDRESSES
*0
*0 ;CONFORMANCE LEVELS
*0
* ;NO ATTRIBUTES
* ;NO MEMBER TYPES
* ;DONE DEFINING CLASSES
*VT52 ;CLASS TO EXTEND
*H19 ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT52
*VT100 ;CLASS TO EXTEND
*H19A ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT100
*VT200 ;CLASS TO EXTEND
*DAS21A ;NEW MEMBER TYPE
* ;ADD NO BITS
*VFW ;NO 132-COLUMN MODE
* ;DONE EXTENDING VT200
* ;DONE EXTENDING CLASSES
*DUMB ;DEFAULT TTY TYPE FOR SYSTEM
=^Z
;TWINKY "RS" MONGEN dialog
;
; Standard KS single-processor
M4097S::
.PA =S:
.RUN DSK:MONGEN
*N ;Write no MONGEN.MIC
*SHORT ;Type of help desired
*SYS ;Hardware dialog
* ;File name
*KS ;Processor type
*RS### Hostess Twinky
*4097 ;CPU0 serial number
*Y ;Exclude monitor overhead ?
*Y ;Account verification ?
*NO ;Ethernet support
*NO ;RPXKON (prompt)
*YES ;TM2KON
*YES ;UNIBUS line printer service
*YES ;UNIBUS card reader service
*8 ;# DZ lines
*CTY ;OPR
*0-6 ;Data set lines
* ;End of data set lines
*30 ;Jobs
* ;Pages core/user
*512 ;Total core
*60 ;Ticks/sec
*Y ;Allow locking ?
*10 ;Core for non-locking jobs
*10 ;Pages of EVM
*2 ;# HPQs
*NO ;METER
*Y ;KASER ?
*Y ;MPXSER ?
*Y ;PSISER ?
*Y ;IPCSER ?
*Y ;ENQ/DEQ ?
*7 ;Disk set
*YES ;Weird hardware
*1 ;# RX211 Floppy disk controllers
*2 ;# RX02 drives
*2 ;# KMC/DUP-11s
*ANF10 ;Default for line 0 (Goes to NOVA/KL1026)
*DECNET ;Default for line 1 (Goes to JINX/KL1026)
*0 ;# DMR11s
*15 ;# PTYs
*Y ;Networks supported ?
;Central site name
*TWINKY
*32 ;# remote TTYs
*YES ;ANF-10 software?
* ;Default node name
*77 ;Node number
*YES ;SET HOST inbound
*YES ;Network virtual terminals ?
*YES ;CDRs ?
*YES ;LPTs ?
*NO ;PTP
*NO ;PTR
*NO ;PLT
*NO ;DDPs ?
*YES ;RDXs ?
*YES ;TSKs ?
*32 ;# of devices that can be connected
*YES ;DECnet softwre?
* ;Default node name
*7 ;DECnet area number
*117 ;Our central site node number
*ROUTING;DECnet router type
* ;Default xmit password
*YES ;NRTSER
*MSGMAX,596 ;Large network message size to accomodate DECnetwork
*TTYWID,80 ;default tty width
*TTCHKS,8 ;increased chunk size
*TTYLCT,0 ;default tty lc
* ;End decimal value definitions
*CHGPPP,<20040,,0> ;Poke or Admin privs to do CHGPPN
*PRVPRV,<^-40,,0> ;No admin privs for automatic jobs
*PRVFIL,055
*RTCH1,1
*MTDLTP,0 ;Standard magtape labels are bypass
*M.EDIT,1 ;Enable TTY EDITOR
* ;End octal value definitions
* ;Sixbit value definitions
* ;DEV,PI
* ;DEV,PI,#
* ;DEV,PI,AC
*MDC,5,100,SYS ;Local ersatz device names (Monitor DoCumentation)
*ASG,66,3024,JOB ;SPR transfer area (DSKB: only)
* ;End user defined ersatz device names
*PIVOT,,RUNFLG,,
*PATH,,RUNFLG,UNIQ.2,
*<<>,PATH,RUNFLG!APPFLG,,
*<=>,PATH,RUNFLG!APPFLG,,
*<>>,PATH,RUNFLG!APPFLG,,
*WHO,,RUNFLG!NOLOGIN,UNIQ.1!UNIQ.2,WHO
*LINE,WHO,RUNFLG!NOLOGIN,UNIQ.1!UNIQ.2,
*NCOPY,#RUNNFT,RUNFLG,,
*NDELET,#RUNNFT,RUNFLG,,
*NDIREC,#RUNNFT,RUNFLG,,
*NMOVE,#RUNNFT,RUNFLG,,
*NRENAM,#RUNNFT,RUNFLG,,
*NREVIE,#RUNNFT,RUNFLG,,
*NTYPE,#RUNNFT,RUNFLG,,
*TLINK,#RUNNFT,RUNFLG,,
*TRANSL,,RUNFLG!APPFLG,,
*TYLOG,,RUNFLG!APPFLG,,
*FMAINT,,RUNFLG,,
* ;End user defined commands
*DUMB ;NEW CLASS
*80 ;WIDTH
*0 ;LENGTH
*0 ;FILL
*XON,CRLF,LC ;BITS
*0 ;TABLE ADDRESSES
*0
*0 ;CONFORMANCE LEVELS
*0
* ;NO ATTRIBUTES
* ;NO MEMBER TYPES
* ;DONE DEFINING CLASSES
*VT52 ;CLASS TO EXTEND
*H19 ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT52
*VT100 ;CLASS TO EXTEND
*H19A ;NEW MEMBER TYPE
* ;NORMAL BITS
*
* ;DONE EXTENDING VT100
*VT200 ;CLASS TO EXTEND
*DAS21A ;NEW MEMBER TYPE
* ;ADD NO BITS
*VFW ;NO 132-COLUMN MODE
* ;DONE EXTENDING VT200
* ;DONE EXTENDING CLASSES
*DUMB ;DEFAULT TTY TYPE FOR SYSTEM
=^Z
Reference in New Issue View Git Blame Copy Permalink