github.com/antonblanchard.microwatt
1
0
Fork 0
mirror of https://github.com/antonblanchard/microwatt.git synced 2026-01-11 23:43:15 +00:00
Code Releases Activity
antonblanchard.microwatt/common.vhdl
Paul Mackerras 39ca675ce3 Decode prefixed instructions 
This adds logic to do basic decoding of the prefixed instructions
defined in PowerISA v3.1B which are in the SFFS (Scalar Fixed plus
Floating-Point Subset) compliancy subset.  In PowerISA v3.1B SFFS,
there are 14 prefixed load/store instructions plus the prefixed no-op
instruction (pnop).  The prefixed load/store instructions all use an
extended version of D-form, which has an extra 18 bits of displacement
in the prefix, plus an 'R' bit which enables PC-relative addressing.

When decode1 sees an instruction word where the insn_code is
INSN_prefix (i.e. the primary opcode was 1), it stores the prefix word
and sends nothing down to decode2 in that cycle.  When the next valid
instruction word arrives, it is interpreted as a suffix, meaning that
its insn_code gets modified before being used to look up the decode
table.

The insn_code values are rearranged so that the values for
instructions which are the suffix of a valid prefixed instruction are
all at even indexes, and the corresponding prefixed instructions
follow immediately, so that an insn_code value can be converted to the
corresponding prefixed value by setting the LSB of the insn_code
value.  There are two prefixed instructions, pld and pstd, for which
the suffix is not a valid SFFS instruction by itself, so these have
been given dummy insn_code values which decode as illegal (INSN_op57
and INSN_op61).

For a prefixed instruction, decode1 examines the type and subtype
fields of the prefix and checks that the suffix is valid for the type
and subtype.  This check doesn't affect which entry of the decode
table is used; the result is passed down to decode2, and will in
future be acted upon in execute1.

The instruction address passed down to decode2 is the address of the
prefix.  To enable this, part of the instruction address is saved when
the prefix is seen, and then the instruction address received from
icache is partly overlaid by the saved prefix address.  Because
prefixed instructions are not permitted to cross 64-byte boundaries,
we only need to save bits 5:2 of the instruction to do this.  If the
alignment restriction ever gets relaxed, we will then need to save
more bits of the address.

Decode2 has been extended to handle the R bit of the prefix (in 8LS
and MLS forms) and to be able to generate the 34-bit immediate value
from the prefix and suffix.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2023-07-06 19:39:40 +10:00

824 lines
32 KiB
VHDL
Raw Blame History

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.utils.all;
use work.decode_types.all;
package common is
-- Processor Version Number
constant PVR_MICROWATT : std_ulogic_vector(31 downto 0) := x"00630000";
-- MSR bit numbers
constant MSR_SF : integer := (63 - 0); -- Sixty-Four bit mode
constant MSR_EE : integer := (63 - 48); -- External interrupt Enable
constant MSR_PR : integer := (63 - 49); -- PRoblem state
constant MSR_FP : integer := (63 - 50); -- Floating Point available
constant MSR_FE0 : integer := (63 - 52); -- Floating Exception mode
constant MSR_SE : integer := (63 - 53); -- Single-step bit of TE field
constant MSR_BE : integer := (63 - 54); -- Branch trace bit of TE field
constant MSR_FE1 : integer := (63 - 55); -- Floating Exception mode
constant MSR_IR : integer := (63 - 58); -- Instruction Relocation
constant MSR_DR : integer := (63 - 59); -- Data Relocation
constant MSR_PMM : integer := (63 - 61); -- Performance Monitor Mark
constant MSR_RI : integer := (63 - 62); -- Recoverable Interrupt
constant MSR_LE : integer := (63 - 63); -- Little Endian
-- SPR numbers
subtype spr_num_t is integer range 0 to 1023;
function decode_spr_num(insn: std_ulogic_vector(31 downto 0)) return spr_num_t;
constant SPR_XER : spr_num_t := 1;
constant SPR_LR : spr_num_t := 8;
constant SPR_CTR : spr_num_t := 9;
constant SPR_TAR : spr_num_t := 815;
constant SPR_DSISR : spr_num_t := 18;
constant SPR_DAR : spr_num_t := 19;
constant SPR_TB : spr_num_t := 268;
constant SPR_TBU : spr_num_t := 269;
constant SPR_DEC : spr_num_t := 22;
constant SPR_SRR0 : spr_num_t := 26;
constant SPR_SRR1 : spr_num_t := 27;
constant SPR_CFAR : spr_num_t := 28;
constant SPR_HSRR0 : spr_num_t := 314;
constant SPR_HSRR1 : spr_num_t := 315;
constant SPR_SPRG0 : spr_num_t := 272;
constant SPR_SPRG1 : spr_num_t := 273;
constant SPR_SPRG2 : spr_num_t := 274;
constant SPR_SPRG3 : spr_num_t := 275;
constant SPR_SPRG3U : spr_num_t := 259;
constant SPR_HSPRG0 : spr_num_t := 304;
constant SPR_HSPRG1 : spr_num_t := 305;
constant SPR_PID : spr_num_t := 48;
constant SPR_PTCR : spr_num_t := 464;
constant SPR_PVR : spr_num_t := 287;
-- PMU registers
constant SPR_UPMC1 : spr_num_t := 771;
constant SPR_UPMC2 : spr_num_t := 772;
constant SPR_UPMC3 : spr_num_t := 773;
constant SPR_UPMC4 : spr_num_t := 774;
constant SPR_UPMC5 : spr_num_t := 775;
constant SPR_UPMC6 : spr_num_t := 776;
constant SPR_UMMCR0 : spr_num_t := 779;
constant SPR_UMMCR1 : spr_num_t := 782;
constant SPR_UMMCR2 : spr_num_t := 769;
constant SPR_UMMCRA : spr_num_t := 770;
constant SPR_USIER : spr_num_t := 768;
constant SPR_USIAR : spr_num_t := 780;
constant SPR_USDAR : spr_num_t := 781;
constant SPR_PMC1 : spr_num_t := 787;
constant SPR_PMC2 : spr_num_t := 788;
constant SPR_PMC3 : spr_num_t := 789;
constant SPR_PMC4 : spr_num_t := 790;
constant SPR_PMC5 : spr_num_t := 791;
constant SPR_PMC6 : spr_num_t := 792;
constant SPR_MMCR0 : spr_num_t := 795;
constant SPR_MMCR1 : spr_num_t := 798;
constant SPR_MMCR2 : spr_num_t := 785;
constant SPR_MMCRA : spr_num_t := 786;
constant SPR_SIER : spr_num_t := 784;
constant SPR_SIAR : spr_num_t := 796;
constant SPR_SDAR : spr_num_t := 797;
-- GPR indices in the register file (GPR only)
subtype gpr_index_t is std_ulogic_vector(4 downto 0);
-- Extended GPR index (can hold a GPR or a FPR)
subtype gspr_index_t is std_ulogic_vector(5 downto 0);
-- FPR indices
subtype fpr_index_t is std_ulogic_vector(4 downto 0);
-- FPRs are stored in the register file, using GSPR
-- numbers from 32 to 63.
--
-- Indices conversion functions
function gspr_to_gpr(i: gspr_index_t) return gpr_index_t;
function gpr_to_gspr(i: gpr_index_t) return gspr_index_t;
function fpr_to_gspr(f: fpr_index_t) return gspr_index_t;
-- The XER is split: the common bits (CA, OV, SO, OV32 and CA32) are
-- in the CR file as a kind of CR extension (with a separate write
-- control). The rest is stored in ctrl_t (effectively in execute1).
type xer_common_t is record
ca : std_ulogic;
ca32 : std_ulogic;
ov : std_ulogic;
ov32 : std_ulogic;
so : std_ulogic;
end record;
constant xerc_init : xer_common_t := (others => '0');
-- Some SPRs are stored in a pair of small RAMs in execute1
-- Even half:
subtype ramspr_index_range is natural range 0 to 7;
subtype ramspr_index is unsigned(2 downto 0);
constant RAMSPR_SRR0 : ramspr_index := to_unsigned(0,3);
constant RAMSPR_HSRR0 : ramspr_index := to_unsigned(1,3);
constant RAMSPR_SPRG0 : ramspr_index := to_unsigned(2,3);
constant RAMSPR_SPRG2 : ramspr_index := to_unsigned(3,3);
constant RAMSPR_HSPRG0 : ramspr_index := to_unsigned(4,3);
constant RAMSPR_LR : ramspr_index := to_unsigned(5,3); -- must equal RAMSPR_CTR
constant RAMSPR_TAR : ramspr_index := to_unsigned(6,3);
-- Odd half:
constant RAMSPR_SRR1 : ramspr_index := to_unsigned(0,3);
constant RAMSPR_HSRR1 : ramspr_index := to_unsigned(1,3);
constant RAMSPR_SPRG1 : ramspr_index := to_unsigned(2,3);
constant RAMSPR_SPRG3 : ramspr_index := to_unsigned(3,3);
constant RAMSPR_HSPRG1 : ramspr_index := to_unsigned(4,3);
constant RAMSPR_CTR : ramspr_index := to_unsigned(5,3); -- must equal RAMSPR_LR
type ram_spr_info is record
index : ramspr_index;
isodd : std_ulogic;
valid : std_ulogic;
end record;
constant ram_spr_info_init: ram_spr_info := (index => to_unsigned(0,3), others => '0');
subtype spr_selector is std_ulogic_vector(2 downto 0);
type spr_id is record
sel : spr_selector;
valid : std_ulogic;
ispmu : std_ulogic;
end record;
constant spr_id_init : spr_id := (sel => "000", others => '0');
constant SPRSEL_TB : spr_selector := 3x"0";
constant SPRSEL_TBU : spr_selector := 3x"1";
constant SPRSEL_DEC : spr_selector := 3x"2";
constant SPRSEL_PVR : spr_selector := 3x"3";
constant SPRSEL_LOGA : spr_selector := 3x"4";
constant SPRSEL_LOGD : spr_selector := 3x"5";
constant SPRSEL_CFAR : spr_selector := 3x"6";
constant SPRSEL_XER : spr_selector := 3x"7";
-- FPSCR bit numbers
constant FPSCR_FX : integer := 63 - 32;
constant FPSCR_FEX : integer := 63 - 33;
constant FPSCR_VX : integer := 63 - 34;
constant FPSCR_OX : integer := 63 - 35;
constant FPSCR_UX : integer := 63 - 36;
constant FPSCR_ZX : integer := 63 - 37;
constant FPSCR_XX : integer := 63 - 38;
constant FPSCR_VXSNAN : integer := 63 - 39;
constant FPSCR_VXISI : integer := 63 - 40;
constant FPSCR_VXIDI : integer := 63 - 41;
constant FPSCR_VXZDZ : integer := 63 - 42;
constant FPSCR_VXIMZ : integer := 63 - 43;
constant FPSCR_VXVC : integer := 63 - 44;
constant FPSCR_FR : integer := 63 - 45;
constant FPSCR_FI : integer := 63 - 46;
constant FPSCR_C : integer := 63 - 47;
constant FPSCR_FL : integer := 63 - 48;
constant FPSCR_FG : integer := 63 - 49;
constant FPSCR_FE : integer := 63 - 50;
constant FPSCR_FU : integer := 63 - 51;
constant FPSCR_VXSOFT : integer := 63 - 53;
constant FPSCR_VXSQRT : integer := 63 - 54;
constant FPSCR_VXCVI : integer := 63 - 55;
constant FPSCR_VE : integer := 63 - 56;
constant FPSCR_OE : integer := 63 - 57;
constant FPSCR_UE : integer := 63 - 58;
constant FPSCR_ZE : integer := 63 - 59;
constant FPSCR_XE : integer := 63 - 60;
constant FPSCR_NI : integer := 63 - 61;
constant FPSCR_RN : integer := 63 - 63;
-- Real addresses
-- REAL_ADDR_BITS is the number of real address bits that we store
constant REAL_ADDR_BITS : positive := 56;
subtype real_addr_t is std_ulogic_vector(REAL_ADDR_BITS - 1 downto 0);
function addr_to_real(addr: std_ulogic_vector(63 downto 0)) return real_addr_t;
-- Used for tracking instruction completion and pending register writes
constant TAG_COUNT : positive := 4;
constant TAG_NUMBER_BITS : natural := log2(TAG_COUNT);
subtype tag_number_t is integer range 0 to TAG_COUNT - 1;
subtype tag_index_t is unsigned(TAG_NUMBER_BITS - 1 downto 0);
type instr_tag_t is record
tag : tag_number_t;
valid : std_ulogic;
end record;
constant instr_tag_init : instr_tag_t := (tag => 0, valid => '0');
function tag_match(tag1 : instr_tag_t; tag2 : instr_tag_t) return boolean;
subtype intr_vector_t is integer range 0 to 16#fff#;
-- For now, fixed 16 sources, make this either a parametric
-- package of some sort or an unconstrainted array.
type ics_to_icp_t is record
-- Level interrupts only, ICS just keeps prsenting the
-- highest priority interrupt. Once handling edge, something
-- smarter involving handshake & reject support will be needed
src : std_ulogic_vector(3 downto 0);
pri : std_ulogic_vector(7 downto 0);
end record;
-- This needs to die...
type ctrl_t is record
tb: std_ulogic_vector(63 downto 0);
dec: std_ulogic_vector(63 downto 0);
msr: std_ulogic_vector(63 downto 0);
cfar: std_ulogic_vector(63 downto 0);
xer_low: std_ulogic_vector(17 downto 0);
end record;
constant ctrl_t_init : ctrl_t :=
(xer_low => 18x"0", others => (others => '0'));
type Fetch1ToIcacheType is record
req: std_ulogic;
virt_mode : std_ulogic;
priv_mode : std_ulogic;
big_endian : std_ulogic;
stop_mark: std_ulogic;
predicted : std_ulogic;
pred_ntaken : std_ulogic;
nia: std_ulogic_vector(63 downto 0);
end record;
type IcacheToDecode1Type is record
valid: std_ulogic;
stop_mark: std_ulogic;
fetch_failed: std_ulogic;
nia: std_ulogic_vector(63 downto 0);
insn: std_ulogic_vector(31 downto 0);
icode: insn_code;
big_endian: std_ulogic;
next_predicted: std_ulogic;
next_pred_ntaken: std_ulogic;
end record;
constant IcacheToDecode1Init : IcacheToDecode1Type :=
(nia => (others => '0'), insn => (others => '0'), icode => INSN_illegal, others => '0');
type IcacheEventType is record
icache_miss : std_ulogic;
itlb_miss_resolved : std_ulogic;
end record;
type Decode1ToDecode2Type is record
valid: std_ulogic;
stop_mark : std_ulogic;
nia: std_ulogic_vector(63 downto 0);
prefixed: std_ulogic;
prefix: std_ulogic_vector(25 downto 0);
illegal_suffix: std_ulogic;
insn: std_ulogic_vector(31 downto 0);
decode: decode_rom_t;
br_pred: std_ulogic; -- Branch was predicted to be taken
big_endian: std_ulogic;
spr_info : spr_id;
ram_spr : ram_spr_info;
reg_a : gspr_index_t;
reg_b : gspr_index_t;
reg_c : gspr_index_t;
end record;
constant Decode1ToDecode2Init : Decode1ToDecode2Type :=
(valid => '0', stop_mark => '0', nia => (others => '0'),
prefixed => '0', prefix => (others => '0'), insn => (others => '0'),
illegal_suffix => '0',
decode => decode_rom_init, br_pred => '0', big_endian => '0',
spr_info => spr_id_init, ram_spr => ram_spr_info_init,
reg_a => (others => '0'), reg_b => (others => '0'), reg_c => (others => '0'));
type Decode1ToFetch1Type is record
redirect : std_ulogic;
redirect_nia : std_ulogic_vector(63 downto 0);
end record;
type Decode1ToRegisterFileType is record
reg_1_addr : gspr_index_t;
reg_2_addr : gspr_index_t;
reg_3_addr : gspr_index_t;
read_1_enable : std_ulogic;
read_2_enable : std_ulogic;
read_3_enable : std_ulogic;
end record;
type bypass_data_t is record
tag : instr_tag_t;
data : std_ulogic_vector(63 downto 0);
end record;
constant bypass_data_init : bypass_data_t := (tag => instr_tag_init, data => (others => '0'));
type cr_bypass_data_t is record
tag : instr_tag_t;
data : std_ulogic_vector(31 downto 0);
end record;
constant cr_bypass_data_init : cr_bypass_data_t := (tag => instr_tag_init, data => (others => '0'));
type Decode2ToExecute1Type is record
valid: std_ulogic;
unit : unit_t;
fac : facility_t;
insn_type: insn_type_t;
nia: std_ulogic_vector(63 downto 0);
instr_tag : instr_tag_t;
write_reg: gspr_index_t;
write_reg_enable: std_ulogic;
read_reg1: gspr_index_t;
read_reg2: gspr_index_t;
read_reg3: gspr_index_t;
read_data1: std_ulogic_vector(63 downto 0);
read_data2: std_ulogic_vector(63 downto 0);
read_data3: std_ulogic_vector(63 downto 0);
reg_valid1: std_ulogic;
reg_valid2: std_ulogic;
reg_valid3: std_ulogic;
cr: std_ulogic_vector(31 downto 0);
xerc: xer_common_t;
lr: std_ulogic;
br_abs: std_ulogic;
rc: std_ulogic;
oe: std_ulogic;
invert_a: std_ulogic;
invert_out: std_ulogic;
input_carry: carry_in_t;
output_carry: std_ulogic;
input_cr: std_ulogic;
output_cr: std_ulogic;
output_xer: std_ulogic;
is_32bit: std_ulogic;
is_signed: std_ulogic;
insn: std_ulogic_vector(31 downto 0);
data_len: std_ulogic_vector(3 downto 0);
byte_reverse : std_ulogic;
sign_extend : std_ulogic; -- do we need to sign extend?
update : std_ulogic; -- is this an update instruction?
reserve : std_ulogic; -- set for larx/stcx
br_pred : std_ulogic;
result_sel : std_ulogic_vector(2 downto 0); -- select source of result
sub_select : std_ulogic_vector(2 downto 0); -- sub-result selection
repeat : std_ulogic; -- set if instruction is cracked into two ops
second : std_ulogic; -- set if this is the second op
spr_select : spr_id;
spr_is_ram : std_ulogic;
ramspr_even_rdaddr : ramspr_index;
ramspr_odd_rdaddr : ramspr_index;
ramspr_rd_odd : std_ulogic;
ramspr_wraddr : ramspr_index;
ramspr_write_even : std_ulogic;
ramspr_write_odd : std_ulogic;
dbg_spr_access : std_ulogic;
dec_ctr : std_ulogic;
end record;
constant Decode2ToExecute1Init : Decode2ToExecute1Type :=
(valid => '0', unit => ALU, fac => NONE, insn_type => OP_ILLEGAL, instr_tag => instr_tag_init,
write_reg_enable => '0',
lr => '0', br_abs => '0', rc => '0', oe => '0', invert_a => '0',
invert_out => '0', input_carry => ZERO, output_carry => '0', input_cr => '0',
output_cr => '0', output_xer => '0',
is_32bit => '0', is_signed => '0', xerc => xerc_init, reserve => '0', br_pred => '0',
byte_reverse => '0', sign_extend => '0', update => '0', nia => (others => '0'),
read_data1 => (others => '0'), read_data2 => (others => '0'), read_data3 => (others => '0'),
reg_valid1 => '0', reg_valid2 => '0', reg_valid3 => '0',
cr => (others => '0'), insn => (others => '0'), data_len => (others => '0'),
result_sel => "000", sub_select => "000",
repeat => '0', second => '0', spr_select => spr_id_init,
spr_is_ram => '0',
ramspr_even_rdaddr => (others => '0'), ramspr_odd_rdaddr => (others => '0'), ramspr_rd_odd => '0',
ramspr_wraddr => (others => '0'), ramspr_write_even => '0', ramspr_write_odd => '0',
dbg_spr_access => '0',
dec_ctr => '0',
others => (others => '0'));
type MultiplyInputType is record
valid: std_ulogic;
data1: std_ulogic_vector(63 downto 0);
data2: std_ulogic_vector(63 downto 0);
addend: std_ulogic_vector(127 downto 0);
is_signed: std_ulogic;
subtract: std_ulogic; -- 0 => addend + data1 * data2, 1 => addend - data1 * data2
end record;
constant MultiplyInputInit : MultiplyInputType := (data1 => 64x"0", data2 => 64x"0",
addend => 128x"0", others => '0');
type MultiplyOutputType is record
valid: std_ulogic;
result: std_ulogic_vector(127 downto 0);
overflow : std_ulogic;
end record;
constant MultiplyOutputInit : MultiplyOutputType := (valid => '0', overflow => '0',
others => (others => '0'));
type Execute1ToDividerType is record
valid: std_ulogic;
flush: std_ulogic;
dividend: std_ulogic_vector(63 downto 0);
divisor: std_ulogic_vector(63 downto 0);
is_signed: std_ulogic;
is_32bit: std_ulogic;
is_extended: std_ulogic;
is_modulus: std_ulogic;
neg_result: std_ulogic;
end record;
constant Execute1ToDividerInit: Execute1ToDividerType := (
dividend => 64x"0", divisor => 64x"0", others => '0');
type PMUEventType is record
no_instr_avail : std_ulogic;
dispatch : std_ulogic;
ext_interrupt : std_ulogic;
instr_complete : std_ulogic;
fp_complete : std_ulogic;
ld_complete : std_ulogic;
st_complete : std_ulogic;
br_taken_complete : std_ulogic;
br_mispredict : std_ulogic;
ipref_discard : std_ulogic;
itlb_miss : std_ulogic;
itlb_miss_resolved : std_ulogic;
icache_miss : std_ulogic;
dc_miss_resolved : std_ulogic;
dc_load_miss : std_ulogic;
dc_ld_miss_resolved : std_ulogic;
dc_store_miss : std_ulogic;
dtlb_miss : std_ulogic;
dtlb_miss_resolved : std_ulogic;
ld_miss_nocache : std_ulogic;
ld_fill_nocache : std_ulogic;
end record;
constant PMUEventInit : PMUEventType := (others => '0');
type Execute1ToPMUType is record
mfspr : std_ulogic;
mtspr : std_ulogic;
spr_num : std_ulogic_vector(4 downto 0);
spr_val : std_ulogic_vector(63 downto 0);
tbbits : std_ulogic_vector(3 downto 0); -- event bits from timebase
pmm_msr : std_ulogic; -- PMM bit from MSR
pr_msr : std_ulogic; -- PR bit from MSR
run : std_ulogic;
nia : std_ulogic_vector(63 downto 0);
addr : std_ulogic_vector(63 downto 0);
addr_v : std_ulogic;
occur : PMUEventType;
end record;
type PMUToExecute1Type is record
spr_val : std_ulogic_vector(63 downto 0);
intr : std_ulogic;
end record;
type Decode2ToRegisterFileType is record
read1_enable : std_ulogic;
read2_enable : std_ulogic;
read3_enable : std_ulogic;
end record;
type RegisterFileToDecode2Type is record
read1_data : std_ulogic_vector(63 downto 0);
read2_data : std_ulogic_vector(63 downto 0);
read3_data : std_ulogic_vector(63 downto 0);
end record;
type Decode2ToCrFileType is record
read : std_ulogic;
end record;
type CrFileToDecode2Type is record
read_cr_data : std_ulogic_vector(31 downto 0);
read_xerc_data : xer_common_t;
end record;
type Execute1ToLoadstore1Type is record
valid : std_ulogic;
op : insn_type_t; -- what ld/st or m[tf]spr or TLB op to do
insn : std_ulogic_vector(31 downto 0);
instr_tag : instr_tag_t;
addr1 : std_ulogic_vector(63 downto 0);
addr2 : std_ulogic_vector(63 downto 0);
data : std_ulogic_vector(63 downto 0); -- data to write, unused for read
write_reg : gspr_index_t;
length : std_ulogic_vector(3 downto 0);
ci : std_ulogic; -- cache-inhibited load/store
byte_reverse : std_ulogic;
sign_extend : std_ulogic; -- do we need to sign extend?
update : std_ulogic; -- is this an update instruction?
xerc : xer_common_t;
reserve : std_ulogic; -- set for larx/stcx.
rc : std_ulogic; -- set for stcx.
virt_mode : std_ulogic; -- do translation through TLB
priv_mode : std_ulogic; -- privileged mode (MSR[PR] = 0)
mode_32bit : std_ulogic; -- trim addresses to 32 bits
is_32bit : std_ulogic;
repeat : std_ulogic;
second : std_ulogic;
e2stall : std_ulogic;
msr : std_ulogic_vector(63 downto 0);
end record;
constant Execute1ToLoadstore1Init : Execute1ToLoadstore1Type :=
(valid => '0', op => OP_ILLEGAL, ci => '0', byte_reverse => '0',
sign_extend => '0', update => '0', xerc => xerc_init,
reserve => '0', rc => '0', virt_mode => '0', priv_mode => '0',
insn => (others => '0'),
instr_tag => instr_tag_init,
addr1 => (others => '0'), addr2 => (others => '0'), data => (others => '0'),
write_reg => (others => '0'),
length => (others => '0'),
mode_32bit => '0', is_32bit => '0',
repeat => '0', second => '0', e2stall => '0',
msr => (others => '0'));
type Loadstore1ToExecute1Type is record
busy : std_ulogic;
l2stall : std_ulogic;
end record;
type Loadstore1ToDcacheType is record
valid : std_ulogic;
hold : std_ulogic;
load : std_ulogic; -- is this a load
dcbz : std_ulogic;
nc : std_ulogic;
reserve : std_ulogic;
virt_mode : std_ulogic;
priv_mode : std_ulogic;
addr : std_ulogic_vector(63 downto 0);
data : std_ulogic_vector(63 downto 0); -- valid the cycle after .valid = 1
byte_sel : std_ulogic_vector(7 downto 0);
end record;
type DcacheToLoadstore1Type is record
valid : std_ulogic;
data : std_ulogic_vector(63 downto 0);
store_done : std_ulogic;
error : std_ulogic;
cache_paradox : std_ulogic;
end record;
type DcacheEventType is record
load_miss : std_ulogic;
store_miss : std_ulogic;
dcache_refill : std_ulogic;
dtlb_miss : std_ulogic;
dtlb_miss_resolved : std_ulogic;
end record;
type Loadstore1ToMmuType is record
valid : std_ulogic;
tlbie : std_ulogic;
slbia : std_ulogic;
mtspr : std_ulogic;
iside : std_ulogic;
load : std_ulogic;
priv : std_ulogic;
ric : std_ulogic_vector(1 downto 0);
sprnf : std_ulogic;
sprnt : std_ulogic;
addr : std_ulogic_vector(63 downto 0);
rs : std_ulogic_vector(63 downto 0);
end record;
type MmuToLoadstore1Type is record
done : std_ulogic;
err : std_ulogic;
invalid : std_ulogic;
badtree : std_ulogic;
segerr : std_ulogic;
perm_error : std_ulogic;
rc_error : std_ulogic;
sprval : std_ulogic_vector(63 downto 0);
end record;
type MmuToDcacheType is record
valid : std_ulogic;
tlbie : std_ulogic;
doall : std_ulogic;
tlbld : std_ulogic;
addr : std_ulogic_vector(63 downto 0);
pte : std_ulogic_vector(63 downto 0);
end record;
type DcacheToMmuType is record
stall : std_ulogic;
done : std_ulogic;
err : std_ulogic;
data : std_ulogic_vector(63 downto 0);
end record;
type MmuToIcacheType is record
tlbld : std_ulogic;
tlbie : std_ulogic;
doall : std_ulogic;
addr : std_ulogic_vector(63 downto 0);
pte : std_ulogic_vector(63 downto 0);
end record;
type Loadstore1ToWritebackType is record
valid : std_ulogic;
instr_tag : instr_tag_t;
write_enable: std_ulogic;
write_reg : gspr_index_t;
write_data : std_ulogic_vector(63 downto 0);
xerc : xer_common_t;
rc : std_ulogic;
store_done : std_ulogic;
interrupt : std_ulogic;
intr_vec : intr_vector_t;
srr1: std_ulogic_vector(15 downto 0);
end record;
constant Loadstore1ToWritebackInit : Loadstore1ToWritebackType :=
(valid => '0', instr_tag => instr_tag_init, write_enable => '0',
write_reg => (others => '0'), write_data => (others => '0'),
xerc => xerc_init, rc => '0', store_done => '0',
interrupt => '0', intr_vec => 0,
srr1 => (others => '0'));
type Loadstore1EventType is record
load_complete : std_ulogic;
store_complete : std_ulogic;
itlb_miss : std_ulogic;
end record;
type Execute1ToWritebackType is record
valid: std_ulogic;
instr_tag : instr_tag_t;
rc : std_ulogic;
mode_32bit : std_ulogic;
write_enable : std_ulogic;
write_reg: gspr_index_t;
write_data: std_ulogic_vector(63 downto 0);
write_cr_enable : std_ulogic;
write_cr_mask : std_ulogic_vector(7 downto 0);
write_cr_data : std_ulogic_vector(31 downto 0);
write_xerc_enable : std_ulogic;
xerc : xer_common_t;
interrupt : std_ulogic;
intr_vec : intr_vector_t;
redirect: std_ulogic;
redir_mode: std_ulogic_vector(3 downto 0);
last_nia: std_ulogic_vector(63 downto 0);
br_offset: std_ulogic_vector(63 downto 0);
br_last: std_ulogic;
br_taken: std_ulogic;
abs_br: std_ulogic;
srr1: std_ulogic_vector(15 downto 0);
msr: std_ulogic_vector(63 downto 0);
end record;
constant Execute1ToWritebackInit : Execute1ToWritebackType :=
(valid => '0', instr_tag => instr_tag_init, rc => '0', mode_32bit => '0',
write_enable => '0', write_cr_enable => '0',
write_xerc_enable => '0', xerc => xerc_init,
write_data => (others => '0'), write_cr_mask => (others => '0'),
write_cr_data => (others => '0'), write_reg => (others => '0'),
interrupt => '0', intr_vec => 0, redirect => '0', redir_mode => "0000",
last_nia => (others => '0'), br_offset => (others => '0'),
br_last => '0', br_taken => '0', abs_br => '0',
srr1 => (others => '0'), msr => (others => '0'));
type Execute1ToFPUType is record
valid : std_ulogic;
op : insn_type_t;
nia : std_ulogic_vector(63 downto 0);
itag : instr_tag_t;
insn : std_ulogic_vector(31 downto 0);
single : std_ulogic;
is_signed : std_ulogic;
fe_mode : std_ulogic_vector(1 downto 0);
fra : std_ulogic_vector(63 downto 0);
frb : std_ulogic_vector(63 downto 0);
frc : std_ulogic_vector(63 downto 0);
valid_a : std_ulogic;
valid_b : std_ulogic;
valid_c : std_ulogic;
frt : gspr_index_t;
rc : std_ulogic;
m32b : std_ulogic;
out_cr : std_ulogic;
oe : std_ulogic;
xerc : xer_common_t;
stall : std_ulogic;
end record;
constant Execute1ToFPUInit : Execute1ToFPUType := (valid => '0', op => OP_ILLEGAL, nia => (others => '0'),
itag => instr_tag_init,
insn => (others => '0'), fe_mode => "00", rc => '0',
fra => (others => '0'), frb => (others => '0'),
frc => (others => '0'), frt => (others => '0'),
valid_a => '0', valid_b => '0', valid_c => '0',
single => '0', is_signed => '0', out_cr => '0',
m32b => '0', oe => '0', xerc => xerc_init,
stall => '0');
type FPUToExecute1Type is record
busy : std_ulogic;
f2stall : std_ulogic;
exception : std_ulogic;
end record;
constant FPUToExecute1Init : FPUToExecute1Type := (others => '0');
type FPUToWritebackType is record
valid : std_ulogic;
interrupt : std_ulogic;
instr_tag : instr_tag_t;
write_enable : std_ulogic;
write_reg : gspr_index_t;
write_data : std_ulogic_vector(63 downto 0);
write_cr_enable : std_ulogic;
write_cr_mask : std_ulogic_vector(7 downto 0);
write_cr_data : std_ulogic_vector(31 downto 0);
write_xerc : std_ulogic;
xerc : xer_common_t;
intr_vec : intr_vector_t;
srr1 : std_ulogic_vector(15 downto 0);
end record;
constant FPUToWritebackInit : FPUToWritebackType :=
(valid => '0', interrupt => '0', instr_tag => instr_tag_init,
write_enable => '0', write_reg => (others => '0'),
write_cr_enable => '0', write_cr_mask => (others => '0'),
write_cr_data => (others => '0'),
write_xerc => '0', xerc => xerc_init,
intr_vec => 0, srr1 => (others => '0'),
others => (others => '0'));
type DividerToExecute1Type is record
valid: std_ulogic;
write_reg_data: std_ulogic_vector(63 downto 0);
overflow : std_ulogic;
end record;
constant DividerToExecute1Init : DividerToExecute1Type := (valid => '0', overflow => '0',
others => (others => '0'));
type WritebackToFetch1Type is record
redirect: std_ulogic;
virt_mode: std_ulogic;
priv_mode: std_ulogic;
big_endian: std_ulogic;
mode_32bit: std_ulogic;
redirect_nia: std_ulogic_vector(63 downto 0);
br_nia : std_ulogic_vector(63 downto 0);
br_last : std_ulogic;
br_taken : std_ulogic;
end record;
constant WritebackToFetch1Init : WritebackToFetch1Type :=
(redirect => '0', virt_mode => '0', priv_mode => '0', big_endian => '0',
mode_32bit => '0', redirect_nia => (others => '0'),
br_last => '0', br_taken => '0', br_nia => (others => '0'));
type WritebackToRegisterFileType is record
write_reg : gspr_index_t;
write_data : std_ulogic_vector(63 downto 0);
write_enable : std_ulogic;
end record;
constant WritebackToRegisterFileInit : WritebackToRegisterFileType :=
(write_enable => '0', write_data => (others => '0'), others => (others => '0'));
type WritebackToCrFileType is record
write_cr_enable : std_ulogic;
write_cr_mask : std_ulogic_vector(7 downto 0);
write_cr_data : std_ulogic_vector(31 downto 0);
write_xerc_enable : std_ulogic;
write_xerc_data : xer_common_t;
end record;
constant WritebackToCrFileInit : WritebackToCrFileType := (write_cr_enable => '0', write_xerc_enable => '0',
write_xerc_data => xerc_init,
write_cr_mask => (others => '0'),
write_cr_data => (others => '0'));
type WritebackToExecute1Type is record
intr : std_ulogic;
srr1 : std_ulogic_vector(15 downto 0);
end record;
type WritebackEventType is record
instr_complete : std_ulogic;
fp_complete : std_ulogic;
end record;
end common;
package body common is
function decode_spr_num(insn: std_ulogic_vector(31 downto 0)) return spr_num_t is
begin
return to_integer(unsigned(insn(15 downto 11) & insn(20 downto 16)));
end;
function gspr_to_gpr(i: gspr_index_t) return gpr_index_t is
begin
return i(4 downto 0);
end;
function gpr_to_gspr(i: gpr_index_t) return gspr_index_t is
begin
return "0" & i;
end;
function fpr_to_gspr(f: fpr_index_t) return gspr_index_t is
begin
return "1" & f;
end;
function tag_match(tag1 : instr_tag_t; tag2 : instr_tag_t) return boolean is
begin
return tag1.valid = '1' and tag2.valid = '1' and tag1.tag = tag2.tag;
end;
function addr_to_real(addr: std_ulogic_vector(63 downto 0)) return real_addr_t is
begin
return addr(real_addr_t'range);
end;
end common;
View Git Blame Copy Permalink