mirror of
https://github.com/antonblanchard/microwatt.git
synced 2026-01-13 15:18:09 +00:00
The main quirk here is that scv sets LR and CTR instead of SRR0 and SRR1, and likewise rfscv uses LR and CTR. Also, scv uses a set of 128 interrupt vectors starting at 0x17000. Fortunately, the layout of the SPR RAM was already such that LR and CTR were in the even and odd halves respectively at the same index, so reading or writing LR and CTR instead of SRR0 and SRR1 is quite easy. Use of scv is subject to an FSCR bit but not an HFSCR bit. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
199 lines
6.7 KiB
VHDL
199 lines
6.7 KiB
VHDL
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
|
|
library work;
|
|
use work.common.all;
|
|
use work.crhelpers.all;
|
|
|
|
entity writeback is
|
|
port (
|
|
clk : in std_ulogic;
|
|
rst : in std_ulogic;
|
|
|
|
e_in : in Execute1ToWritebackType;
|
|
l_in : in Loadstore1ToWritebackType;
|
|
fp_in : in FPUToWritebackType;
|
|
|
|
w_out : out WritebackToRegisterFileType;
|
|
c_out : out WritebackToCrFileType;
|
|
f_out : out WritebackToFetch1Type;
|
|
|
|
wb_bypass : out bypass_data_t;
|
|
|
|
-- PMU event bus
|
|
events : out WritebackEventType;
|
|
|
|
flush_out : out std_ulogic;
|
|
interrupt_out: out WritebackToExecute1Type;
|
|
complete_out : out instr_tag_t
|
|
);
|
|
end entity writeback;
|
|
|
|
architecture behaviour of writeback is
|
|
|
|
begin
|
|
writeback_0: process(clk)
|
|
variable x : std_ulogic_vector(0 downto 0);
|
|
variable y : std_ulogic_vector(0 downto 0);
|
|
variable w : std_ulogic_vector(0 downto 0);
|
|
begin
|
|
if rising_edge(clk) then
|
|
-- Do consistency checks only on the clock edge
|
|
x(0) := e_in.valid;
|
|
y(0) := l_in.valid;
|
|
w(0) := fp_in.valid;
|
|
assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) +
|
|
to_integer(unsigned(w))) <= 1 severity failure;
|
|
|
|
x(0) := e_in.write_enable;
|
|
y(0) := l_in.write_enable;
|
|
w(0) := fp_in.write_enable;
|
|
assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) +
|
|
to_integer(unsigned(w))) <= 1 severity failure;
|
|
|
|
w(0) := e_in.write_cr_enable;
|
|
x(0) := l_in.rc;
|
|
y(0) := fp_in.write_cr_enable;
|
|
assert (to_integer(unsigned(w)) + to_integer(unsigned(x)) +
|
|
to_integer(unsigned(y))) <= 1 severity failure;
|
|
|
|
assert (e_in.write_xerc_enable and fp_in.write_xerc) /= '1' severity failure;
|
|
|
|
assert not (e_in.valid = '1' and e_in.instr_tag.valid = '0') severity failure;
|
|
assert not (l_in.valid = '1' and l_in.instr_tag.valid = '0') severity failure;
|
|
assert not (fp_in.valid = '1' and fp_in.instr_tag.valid = '0') severity failure;
|
|
end if;
|
|
end process;
|
|
|
|
writeback_1: process(all)
|
|
variable f : WritebackToFetch1Type;
|
|
variable scf : std_ulogic_vector(3 downto 0);
|
|
variable vec : integer range 0 to 16#fff#;
|
|
variable srr1 : std_ulogic_vector(15 downto 0);
|
|
variable intr : std_ulogic;
|
|
variable hvi : std_ulogic;
|
|
variable scv : std_ulogic;
|
|
variable intr_page : std_ulogic_vector(4 downto 0);
|
|
begin
|
|
w_out <= WritebackToRegisterFileInit;
|
|
c_out <= WritebackToCrFileInit;
|
|
f := WritebackToFetch1Init;
|
|
vec := 0;
|
|
hvi := '0';
|
|
|
|
complete_out <= instr_tag_init;
|
|
if e_in.valid = '1' then
|
|
complete_out <= e_in.instr_tag;
|
|
elsif l_in.valid = '1' then
|
|
complete_out <= l_in.instr_tag;
|
|
elsif fp_in.valid = '1' then
|
|
complete_out <= fp_in.instr_tag;
|
|
end if;
|
|
events.instr_complete <= complete_out.valid;
|
|
events.fp_complete <= fp_in.valid;
|
|
|
|
intr := e_in.interrupt or l_in.interrupt or fp_in.interrupt;
|
|
interrupt_out.intr <= intr;
|
|
|
|
srr1 := (others => '0');
|
|
intr_page := 5x"0";
|
|
scv := '0';
|
|
if e_in.interrupt = '1' then
|
|
vec := e_in.intr_vec;
|
|
srr1 := e_in.srr1;
|
|
hvi := e_in.hv_intr;
|
|
scv := e_in.is_scv;
|
|
if e_in.is_scv = '1' then
|
|
intr_page := 5x"17";
|
|
end if;
|
|
elsif l_in.interrupt = '1' then
|
|
vec := l_in.intr_vec;
|
|
srr1 := l_in.srr1;
|
|
elsif fp_in.interrupt = '1' then
|
|
vec := fp_in.intr_vec;
|
|
srr1 := fp_in.srr1;
|
|
end if;
|
|
interrupt_out.hv_intr <= hvi;
|
|
interrupt_out.srr1 <= srr1;
|
|
interrupt_out.scv_int <= scv;
|
|
|
|
if intr = '0' then
|
|
if e_in.write_enable = '1' then
|
|
w_out.write_reg <= e_in.write_reg;
|
|
w_out.write_data <= e_in.write_data;
|
|
w_out.write_enable <= '1';
|
|
end if;
|
|
|
|
if e_in.write_cr_enable = '1' then
|
|
c_out.write_cr_enable <= '1';
|
|
c_out.write_cr_mask <= e_in.write_cr_mask;
|
|
c_out.write_cr_data <= e_in.write_cr_data;
|
|
end if;
|
|
|
|
if e_in.write_xerc_enable = '1' then
|
|
c_out.write_xerc_enable <= '1';
|
|
c_out.write_xerc_data <= e_in.xerc;
|
|
end if;
|
|
|
|
if fp_in.write_enable = '1' then
|
|
w_out.write_reg <= fp_in.write_reg;
|
|
w_out.write_data <= fp_in.write_data;
|
|
w_out.write_enable <= '1';
|
|
end if;
|
|
|
|
if fp_in.write_cr_enable = '1' then
|
|
c_out.write_cr_enable <= '1';
|
|
c_out.write_cr_mask <= fp_in.write_cr_mask;
|
|
c_out.write_cr_data <= fp_in.write_cr_data;
|
|
end if;
|
|
|
|
if fp_in.write_xerc = '1' then
|
|
c_out.write_xerc_enable <= '1';
|
|
c_out.write_xerc_data <= fp_in.xerc;
|
|
end if;
|
|
|
|
if l_in.write_enable = '1' then
|
|
w_out.write_reg <= l_in.write_reg;
|
|
w_out.write_data <= l_in.write_data;
|
|
w_out.write_enable <= '1';
|
|
end if;
|
|
|
|
if l_in.rc = '1' then
|
|
-- st*cx. instructions
|
|
scf(3) := '0';
|
|
scf(2) := '0';
|
|
scf(1) := l_in.store_done;
|
|
scf(0) := l_in.xerc.so;
|
|
c_out.write_cr_enable <= '1';
|
|
c_out.write_cr_mask <= num_to_fxm(0);
|
|
c_out.write_cr_data(31 downto 28) <= scf;
|
|
end if;
|
|
|
|
end if;
|
|
|
|
-- Outputs to fetch1
|
|
f.interrupt := intr;
|
|
f.intr_vec := intr_page & std_ulogic_vector(to_unsigned(vec, 12));
|
|
f.redirect := e_in.redirect;
|
|
f.redirect_nia := e_in.write_data;
|
|
f.br_nia := e_in.last_nia;
|
|
f.br_last := e_in.br_last and not intr;
|
|
f.br_taken := e_in.br_taken;
|
|
-- send MSR[IR], ~MSR[PR], ~MSR[LE] and ~MSR[SF] up to fetch1
|
|
f.virt_mode := e_in.redir_mode(3);
|
|
f.priv_mode := e_in.redir_mode(2);
|
|
f.big_endian := e_in.redir_mode(1);
|
|
f.mode_32bit := e_in.redir_mode(0);
|
|
|
|
f_out <= f;
|
|
flush_out <= f_out.redirect or intr;
|
|
|
|
-- Register write data bypass to decode2
|
|
wb_bypass.tag.tag <= complete_out.tag;
|
|
wb_bypass.tag.valid <= complete_out.valid and w_out.write_enable;
|
|
wb_bypass.data <= w_out.write_data;
|
|
|
|
end process;
|
|
end;
|