github.com/antonblanchard.microwatt
1
0
Fork 0
mirror of https://github.com/antonblanchard/microwatt.git synced 2026-01-11 23:43:15 +00:00
Code Releases Activity
antonblanchard.microwatt/soc.vhdl
Benjamin Herrenschmidt e5aa0e9dc9 uart: Remove combinational loops on ack and stall signal 
They hurt timing forcing signals to come from the master and back
again in one cycle. Stall isn't sampled by the master unless there
is an active cycle so masking it with cyc is pointless. Masking acks
is somewhat pointless too as we don't handle early dropping of cyc
in any of our slaves properly anyways.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-06-13 11:38:34 +10:00

694 lines
22 KiB
VHDL
Raw Blame History

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.math_real.all;
use std.textio.all;
use std.env.stop;
library work;
use work.common.all;
use work.wishbone_types.all;
-- Memory map. *** Keep include/microwatt_soc.h updated on changes ***
--
-- Main bus:
-- 0x00000000: Block RAM (MEMORY_SIZE) or DRAM depending on syscon
-- 0x40000000: DRAM (when present)
-- 0x80000000: Block RAM (aliased & repeated)
-- IO Bus:
-- 0xc0000000: SYSCON
-- 0xc0002000: UART0
-- 0xc0004000: XICS ICP
-- 0xc0006000: SPI Flash controller
-- 0xc0100000: LiteDRAM control (CSRs)
-- 0xf0000000: Flash "ROM" mapping
-- 0xff000000: DRAM init code (if any) or flash ROM
entity soc is
generic (
MEMORY_SIZE : natural;
RAM_INIT_FILE : string;
RESET_LOW : boolean;
CLK_FREQ : positive;
SIM : boolean;
DISABLE_FLATTEN_CORE : boolean := false;
HAS_DRAM : boolean := false;
DRAM_SIZE : integer := 0;
DRAM_INIT_SIZE : integer := 0;
HAS_SPI_FLASH : boolean := false;
SPI_FLASH_DLINES : positive := 1;
SPI_FLASH_OFFSET : integer := 0;
SPI_FLASH_DEF_CKDV : natural := 2;
SPI_FLASH_DEF_QUAD : boolean := false
);
port(
rst : in std_ulogic;
system_clk : in std_ulogic;
-- DRAM controller signals
wb_dram_in : out wishbone_master_out;
wb_dram_out : in wishbone_slave_out;
wb_dram_ctrl_in : out wb_io_master_out;
wb_dram_ctrl_out : in wb_io_slave_out;
wb_dram_is_csr : out std_ulogic;
wb_dram_is_init : out std_ulogic;
-- UART0 signals:
uart0_txd : out std_ulogic;
uart0_rxd : in std_ulogic;
-- SPI Flash signals
spi_flash_sck : out std_ulogic;
spi_flash_cs_n : out std_ulogic;
spi_flash_sdat_o : out std_ulogic_vector(SPI_FLASH_DLINES-1 downto 0);
spi_flash_sdat_oe : out std_ulogic_vector(SPI_FLASH_DLINES-1 downto 0);
spi_flash_sdat_i : in std_ulogic_vector(SPI_FLASH_DLINES-1 downto 0);
-- DRAM controller signals
alt_reset : in std_ulogic
);
end entity soc;
architecture behaviour of soc is
-- Wishbone master signals:
signal wishbone_dcore_in : wishbone_slave_out;
signal wishbone_dcore_out : wishbone_master_out;
signal wishbone_icore_in : wishbone_slave_out;
signal wishbone_icore_out : wishbone_master_out;
signal wishbone_debug_in : wishbone_slave_out;
signal wishbone_debug_out : wishbone_master_out;
-- Arbiter array (ghdl doesnt' support assigning the array
-- elements in the entity instantiation)
constant NUM_WB_MASTERS : positive := 3;
signal wb_masters_out : wishbone_master_out_vector(0 to NUM_WB_MASTERS-1);
signal wb_masters_in : wishbone_slave_out_vector(0 to NUM_WB_MASTERS-1);
-- Wishbone master (output of arbiter):
signal wb_master_in : wishbone_slave_out;
signal wb_master_out : wishbone_master_out;
-- Main "IO" bus, from main slave decoder to the latch
signal wb_io_in : wishbone_master_out;
signal wb_io_out : wishbone_slave_out;
-- Secondary (smaller) IO bus after the IO bus latch
signal wb_sio_out : wb_io_master_out;
signal wb_sio_in : wb_io_slave_out;
-- Syscon signals
signal dram_at_0 : std_ulogic;
signal do_core_reset : std_ulogic;
signal wb_syscon_in : wb_io_master_out;
signal wb_syscon_out : wb_io_slave_out;
-- UART0 signals:
signal wb_uart0_in : wb_io_master_out;
signal wb_uart0_out : wb_io_slave_out;
signal uart_dat8 : std_ulogic_vector(7 downto 0);
-- SPI Flash controller signals:
signal wb_spiflash_in : wb_io_master_out;
signal wb_spiflash_out : wb_io_slave_out;
signal wb_spiflash_is_reg : std_ulogic;
signal wb_spiflash_is_map : std_ulogic;
-- XICS0 signals:
signal wb_xics0_in : wb_io_master_out;
signal wb_xics0_out : wb_io_slave_out;
signal int_level_in : std_ulogic_vector(15 downto 0);
signal core_ext_irq : std_ulogic;
-- Main memory signals:
signal wb_bram_in : wishbone_master_out;
signal wb_bram_out : wishbone_slave_out;
-- DMI debug bus signals
signal dmi_addr : std_ulogic_vector(7 downto 0);
signal dmi_din : std_ulogic_vector(63 downto 0);
signal dmi_dout : std_ulogic_vector(63 downto 0);
signal dmi_req : std_ulogic;
signal dmi_wr : std_ulogic;
signal dmi_ack : std_ulogic;
-- Per slave DMI signals
signal dmi_wb_dout : std_ulogic_vector(63 downto 0);
signal dmi_wb_req : std_ulogic;
signal dmi_wb_ack : std_ulogic;
signal dmi_core_dout : std_ulogic_vector(63 downto 0);
signal dmi_core_req : std_ulogic;
signal dmi_core_ack : std_ulogic;
-- Delayed/latched resets and alt_reset
signal rst_core : std_ulogic := '1';
signal rst_uart : std_ulogic := '1';
signal rst_xics : std_ulogic := '1';
signal rst_spi : std_ulogic := '1';
signal rst_bram : std_ulogic := '1';
signal rst_dtm : std_ulogic := '1';
signal rst_wbar : std_ulogic := '1';
signal rst_wbdb : std_ulogic := '1';
signal alt_reset_d : std_ulogic;
-- IO branch split:
type slave_io_type is (SLAVE_IO_SYSCON,
SLAVE_IO_UART,
SLAVE_IO_DRAM_INIT,
SLAVE_IO_DRAM_CSR,
SLAVE_IO_ICP_0,
SLAVE_IO_SPI_FLASH_REG,
SLAVE_IO_SPI_FLASH_MAP,
SLAVE_IO_NONE);
signal slave_io_dbg : slave_io_type;
begin
resets: process(system_clk)
begin
if rising_edge(system_clk) then
rst_core <= rst or do_core_reset;
rst_uart <= rst;
rst_spi <= rst;
rst_xics <= rst;
rst_bram <= rst;
rst_dtm <= rst;
rst_wbar <= rst;
rst_wbdb <= rst;
alt_reset_d <= alt_reset;
end if;
end process;
-- Processor core
processor: entity work.core
generic map(
SIM => SIM,
DISABLE_FLATTEN => DISABLE_FLATTEN_CORE,
ALT_RESET_ADDRESS => (23 downto 0 => '0', others => '1')
)
port map(
clk => system_clk,
rst => rst_core,
alt_reset => alt_reset_d,
wishbone_insn_in => wishbone_icore_in,
wishbone_insn_out => wishbone_icore_out,
wishbone_data_in => wishbone_dcore_in,
wishbone_data_out => wishbone_dcore_out,
dmi_addr => dmi_addr(3 downto 0),
dmi_dout => dmi_core_dout,
dmi_din => dmi_dout,
dmi_wr => dmi_wr,
dmi_ack => dmi_core_ack,
dmi_req => dmi_core_req,
ext_irq => core_ext_irq
);
-- Wishbone bus master arbiter & mux
wb_masters_out <= (0 => wishbone_dcore_out,
1 => wishbone_icore_out,
2 => wishbone_debug_out);
wishbone_dcore_in <= wb_masters_in(0);
wishbone_icore_in <= wb_masters_in(1);
wishbone_debug_in <= wb_masters_in(2);
wishbone_arbiter_0: entity work.wishbone_arbiter
generic map(
NUM_MASTERS => NUM_WB_MASTERS
)
port map(
clk => system_clk,
rst => rst_wbar,
wb_masters_in => wb_masters_out,
wb_masters_out => wb_masters_in,
wb_slave_out => wb_master_out,
wb_slave_in => wb_master_in
);
-- Top level Wishbone slaves address decoder & mux
--
-- From CPU to BRAM, DRAM, IO, selected on top 3 bits and dram_at_0
-- 0000 - BRAM
-- 0001 - DRAM
-- 01xx - DRAM
-- 10xx - BRAM
-- 11xx - IO
--
slave_top_intercon: process(wb_master_out, wb_bram_out, wb_dram_out, wb_io_out, dram_at_0)
type slave_top_type is (SLAVE_TOP_BRAM,
SLAVE_TOP_DRAM,
SLAVE_TOP_IO);
variable slave_top : slave_top_type;
variable top_decode : std_ulogic_vector(3 downto 0);
begin
-- Top-level address decoder
top_decode := wb_master_out.adr(31 downto 29) & dram_at_0;
slave_top := SLAVE_TOP_BRAM;
if std_match(top_decode, "0000") then
slave_top := SLAVE_TOP_BRAM;
elsif std_match(top_decode, "0001") then
slave_top := SLAVE_TOP_DRAM;
elsif std_match(top_decode, "01--") then
slave_top := SLAVE_TOP_DRAM;
elsif std_match(top_decode, "10--") then
slave_top := SLAVE_TOP_BRAM;
elsif std_match(top_decode, "11--") then
slave_top := SLAVE_TOP_IO;
end if;
-- Top level wishbone muxing.
wb_bram_in <= wb_master_out;
wb_bram_in.cyc <= '0';
wb_dram_in <= wb_master_out;
wb_dram_in.cyc <= '0';
wb_io_in <= wb_master_out;
wb_io_in.cyc <= '0';
case slave_top is
when SLAVE_TOP_BRAM =>
wb_bram_in.cyc <= wb_master_out.cyc;
wb_master_in <= wb_bram_out;
when SLAVE_TOP_DRAM =>
wb_dram_in.cyc <= wb_master_out.cyc;
wb_master_in <= wb_dram_out;
when SLAVE_TOP_IO =>
wb_io_in.cyc <= wb_master_out.cyc;
wb_master_in <= wb_io_out;
end case;
end process slave_top_intercon;
-- IO wishbone slave 64->32 bits converter
--
-- For timing reasons, this adds a one cycle latch on the way both
-- in and out. This relaxes timing and routing pressure on the "main"
-- memory bus by moving all simple IOs to a slower 32-bit bus.
--
-- This implementation is rather dumb at the moment, no stash buffer,
-- so we stall whenever that latch is busy. This can be improved.
--
slave_io_latch: process(system_clk)
-- State
type state_t is (IDLE, WAIT_ACK_BOT, WAIT_ACK_TOP);
variable state : state_t;
-- Misc
variable has_top : boolean;
variable has_bot : boolean;
begin
if rising_edge(system_clk) then
if (rst) then
state := IDLE;
wb_io_out.ack <= '0';
wb_io_out.stall <= '0';
wb_sio_out.cyc <= '0';
wb_sio_out.stb <= '0';
has_top := false;
has_bot := false;
else
case state is
when IDLE =>
-- Clear ACK in case it was set
wb_io_out.ack <= '0';
-- Do we have a cycle ?
if wb_io_in.cyc = '1' and wb_io_in.stb = '1' then
-- Stall master until we are done, we are't (yet) pipelining
-- this, it's all slow IOs.
wb_io_out.stall <= '1';
-- Start cycle downstream
wb_sio_out.cyc <= '1';
wb_sio_out.stb <= '1';
-- Copy write enable to IO out, copy address as well
wb_sio_out.we <= wb_io_in.we;
wb_sio_out.adr <= wb_io_in.adr(wb_sio_out.adr'left downto 3) & "000";
-- Do we have a top word and/or a bottom word ?
has_top := wb_io_in.sel(7 downto 4) /= "0000";
has_bot := wb_io_in.sel(3 downto 0) /= "0000";
-- If we have a bottom word, handle it first, otherwise
-- send the top word down. XXX Split the actual mux out
-- and only generate a control signal.
if has_bot then
if wb_io_in.we = '1' then
wb_sio_out.dat <= wb_io_in.dat(31 downto 0);
end if;
wb_sio_out.sel <= wb_io_in.sel(3 downto 0);
-- Wait for ack
state := WAIT_ACK_BOT;
else
if wb_io_in.we = '1' then
wb_sio_out.dat <= wb_io_in.dat(63 downto 32);
end if;
wb_sio_out.sel <= wb_io_in.sel(7 downto 4);
-- Bump address
wb_sio_out.adr(2) <= '1';
-- Wait for ack
state := WAIT_ACK_TOP;
end if;
end if;
when WAIT_ACK_BOT =>
-- If we aren't stalled by the device, clear stb
if wb_sio_in.stall = '0' then
wb_sio_out.stb <= '0';
end if;
-- Handle ack
if wb_sio_in.ack = '1' then
-- If it's a read, latch the data
if wb_sio_out.we = '0' then
wb_io_out.dat(31 downto 0) <= wb_sio_in.dat;
end if;
-- Do we have a "top" part as well ?
if has_top then
-- Latch data & sel
if wb_io_in.we = '1' then
wb_sio_out.dat <= wb_io_in.dat(63 downto 32);
end if;
wb_sio_out.sel <= wb_io_in.sel(7 downto 4);
-- Bump address and set STB
wb_sio_out.adr(2) <= '1';
wb_sio_out.stb <= '1';
-- Wait for new ack
state := WAIT_ACK_TOP;
else
-- We are done, ack up, clear cyc downstram
wb_sio_out.cyc <= '0';
-- And ack & unstall upstream
wb_io_out.ack <= '1';
wb_io_out.stall <= '0';
-- Wait for next one
state := IDLE;
end if;
end if;
when WAIT_ACK_TOP =>
-- If we aren't stalled by the device, clear stb
if wb_sio_in.stall = '0' then
wb_sio_out.stb <= '0';
end if;
-- Handle ack
if wb_sio_in.ack = '1' then
-- If it's a read, latch the data
if wb_sio_out.we = '0' then
wb_io_out.dat(63 downto 32) <= wb_sio_in.dat;
end if;
-- We are done, ack up, clear cyc downstram
wb_sio_out.cyc <= '0';
-- And ack & unstall upstream
wb_io_out.ack <= '1';
wb_io_out.stall <= '0';
-- Wait for next one
state := IDLE;
end if;
end case;
end if;
end if;
end process;
-- IO wishbone slave intercon.
--
slave_io_intercon: process(wb_sio_out, wb_syscon_out, wb_uart0_out,
wb_dram_ctrl_out, wb_xics0_out, wb_spiflash_out)
variable slave_io : slave_io_type;
variable match : std_ulogic_vector(31 downto 12);
begin
-- Simple address decoder.
slave_io := SLAVE_IO_NONE;
match := "11" & wb_sio_out.adr(29 downto 12);
if std_match(match, x"FF---") and HAS_DRAM then
slave_io := SLAVE_IO_DRAM_INIT;
elsif std_match(match, x"F----") then
slave_io := SLAVE_IO_SPI_FLASH_MAP;
elsif std_match(match, x"C0000") then
slave_io := SLAVE_IO_SYSCON;
elsif std_match(match, x"C0002") then
slave_io := SLAVE_IO_UART;
elsif std_match(match, x"C01--") then
slave_io := SLAVE_IO_DRAM_CSR;
elsif std_match(match, x"C0004") then
slave_io := SLAVE_IO_ICP_0;
elsif std_match(match, x"C0006") then
slave_io := SLAVE_IO_SPI_FLASH_REG;
end if;
slave_io_dbg <= slave_io;
wb_uart0_in <= wb_sio_out;
wb_uart0_in.cyc <= '0';
wb_spiflash_in <= wb_sio_out;
wb_spiflash_in.cyc <= '0';
wb_spiflash_is_reg <= '0';
wb_spiflash_is_map <= '0';
-- Only give xics 8 bits of wb addr
wb_xics0_in <= wb_sio_out;
wb_xics0_in.adr <= (others => '0');
wb_xics0_in.adr(7 downto 0) <= wb_sio_out.adr(7 downto 0);
wb_xics0_in.cyc <= '0';
wb_dram_ctrl_in <= wb_sio_out;
wb_dram_ctrl_in.cyc <= '0';
wb_dram_is_csr <= '0';
wb_dram_is_init <= '0';
wb_syscon_in <= wb_sio_out;
wb_syscon_in.cyc <= '0';
case slave_io is
when SLAVE_IO_DRAM_INIT =>
wb_dram_ctrl_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_dram_ctrl_out;
wb_dram_is_init <= '1';
when SLAVE_IO_DRAM_CSR =>
wb_dram_ctrl_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_dram_ctrl_out;
wb_dram_is_csr <= '1';
when SLAVE_IO_SYSCON =>
wb_syscon_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_syscon_out;
when SLAVE_IO_UART =>
wb_uart0_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_uart0_out;
when SLAVE_IO_ICP_0 =>
wb_xics0_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_xics0_out;
when SLAVE_IO_SPI_FLASH_MAP =>
-- Clear top bits so they don't make their way to the
-- fash chip.
wb_spiflash_in.adr(29 downto 28) <= "00";
wb_spiflash_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_spiflash_out;
wb_spiflash_is_map <= '1';
when SLAVE_IO_SPI_FLASH_REG =>
wb_spiflash_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_spiflash_out;
wb_spiflash_is_reg <= '1';
when others =>
wb_sio_in.dat <= (others => '1');
wb_sio_in.ack <= wb_sio_out.stb and wb_sio_out.cyc;
wb_sio_in.stall <= '0';
end case;
end process;
-- Syscon slave
syscon0: entity work.syscon
generic map(
HAS_UART => true,
HAS_DRAM => HAS_DRAM,
BRAM_SIZE => MEMORY_SIZE,
DRAM_SIZE => DRAM_SIZE,
DRAM_INIT_SIZE => DRAM_INIT_SIZE,
CLK_FREQ => CLK_FREQ,
HAS_SPI_FLASH => HAS_SPI_FLASH,
SPI_FLASH_OFFSET => SPI_FLASH_OFFSET
)
port map(
clk => system_clk,
rst => rst,
wishbone_in => wb_syscon_in,
wishbone_out => wb_syscon_out,
dram_at_0 => dram_at_0,
core_reset => do_core_reset,
soc_reset => open -- XXX TODO
);
-- Simulated memory and UART
-- UART0 wishbone slave
uart0: entity work.pp_soc_uart
generic map(
FIFO_DEPTH => 32
)
port map(
clk => system_clk,
reset => rst_uart,
txd => uart0_txd,
rxd => uart0_rxd,
irq => int_level_in(0),
wb_adr_in => wb_uart0_in.adr(11 downto 0),
wb_dat_in => wb_uart0_in.dat(7 downto 0),
wb_dat_out => uart_dat8,
wb_cyc_in => wb_uart0_in.cyc,
wb_stb_in => wb_uart0_in.stb,
wb_we_in => wb_uart0_in.we,
wb_ack_out => wb_uart0_out.ack
);
wb_uart0_out.dat <= x"000000" & uart_dat8;
wb_uart0_out.stall <= not wb_uart0_out.ack;
spiflash_gen: if HAS_SPI_FLASH generate
spiflash: entity work.spi_flash_ctrl
generic map (
DATA_LINES => SPI_FLASH_DLINES,
DEF_CLK_DIV => SPI_FLASH_DEF_CKDV,
DEF_QUAD_READ => SPI_FLASH_DEF_QUAD
)
port map(
rst => rst_spi,
clk => system_clk,
wb_in => wb_spiflash_in,
wb_out => wb_spiflash_out,
wb_sel_reg => wb_spiflash_is_reg,
wb_sel_map => wb_spiflash_is_map,
sck => spi_flash_sck,
cs_n => spi_flash_cs_n,
sdat_o => spi_flash_sdat_o,
sdat_oe => spi_flash_sdat_oe,
sdat_i => spi_flash_sdat_i
);
end generate;
no_spi0_gen: if not HAS_SPI_FLASH generate
wb_spiflash_out.dat <= (others => '1');
wb_spiflash_out.ack <= wb_spiflash_in.cyc and wb_spiflash_in.stb;
wb_spiflash_out.stall <= wb_spiflash_in.cyc and not wb_spiflash_out.ack;
end generate;
xics0: entity work.xics
generic map(
LEVEL_NUM => 16
)
port map(
clk => system_clk,
rst => rst_xics,
wb_in => wb_xics0_in,
wb_out => wb_xics0_out,
int_level_in => int_level_in,
core_irq_out => core_ext_irq
);
-- BRAM Memory slave
bram: if MEMORY_SIZE /= 0 generate
bram0: entity work.wishbone_bram_wrapper
generic map(
MEMORY_SIZE => MEMORY_SIZE,
RAM_INIT_FILE => RAM_INIT_FILE
)
port map(
clk => system_clk,
rst => rst_bram,
wishbone_in => wb_bram_in,
wishbone_out => wb_bram_out
);
end generate;
no_bram: if MEMORY_SIZE = 0 generate
wb_bram_out.ack <= wb_bram_in.cyc and wb_bram_in.stb;
wb_bram_out.dat <= x"FFFFFFFFFFFFFFFF";
wb_bram_out.stall <= wb_bram_in.cyc and not wb_bram_out.ack;
end generate;
-- DMI(debug bus) <-> JTAG bridge
dtm: entity work.dmi_dtm
generic map(
ABITS => 8,
DBITS => 64
)
port map(
sys_clk => system_clk,
sys_reset => rst_dtm,
dmi_addr => dmi_addr,
dmi_din => dmi_din,
dmi_dout => dmi_dout,
dmi_req => dmi_req,
dmi_wr => dmi_wr,
dmi_ack => dmi_ack
);
-- DMI interconnect
dmi_intercon: process(dmi_addr, dmi_req,
dmi_wb_ack, dmi_wb_dout,
dmi_core_ack, dmi_core_dout)
-- DMI address map (each address is a full 64-bit register)
--
-- Offset: Size: Slave:
-- 0 4 Wishbone
-- 10 16 Core
type slave_type is (SLAVE_WB,
SLAVE_CORE,
SLAVE_NONE);
variable slave : slave_type;
begin
-- Simple address decoder
slave := SLAVE_NONE;
if std_match(dmi_addr, "000000--") then
slave := SLAVE_WB;
elsif std_match(dmi_addr, "0001----") then
slave := SLAVE_CORE;
end if;
-- DMI muxing
dmi_wb_req <= '0';
dmi_core_req <= '0';
case slave is
when SLAVE_WB =>
dmi_wb_req <= dmi_req;
dmi_ack <= dmi_wb_ack;
dmi_din <= dmi_wb_dout;
when SLAVE_CORE =>
dmi_core_req <= dmi_req;
dmi_ack <= dmi_core_ack;
dmi_din <= dmi_core_dout;
when others =>
dmi_ack <= dmi_req;
dmi_din <= (others => '1');
end case;
-- SIM magic exit
if SIM and dmi_req = '1' and dmi_addr = "11111111" and dmi_wr = '1' then
stop;
end if;
end process;
-- Wishbone debug master (TODO: Add a DMI address decoder)
wishbone_debug: entity work.wishbone_debug_master
port map(clk => system_clk,
rst => rst_wbdb,
dmi_addr => dmi_addr(1 downto 0),
dmi_dout => dmi_wb_dout,
dmi_din => dmi_dout,
dmi_wr => dmi_wr,
dmi_ack => dmi_wb_ack,
dmi_req => dmi_wb_req,
wb_in => wishbone_debug_in,
wb_out => wishbone_debug_out);
end architecture behaviour;
View Git Blame Copy Permalink