diff --git a/PM‐41-(2)-diagram.md b/PM‐41-(2)-diagram.md
new file mode 100644
index 0000000..3c3f545
--- /dev/null
+++ b/PM‐41-(2)-diagram.md
@@ -0,0 +1,13 @@
+## PM-41 (2) PsNee modchip installation diagram
+Towards the end of the SCPH-10x PSone production Sony revised the board slightly and releasedthe PM-41 (2) board. This page covers the installation diagram for installing a PsNee chip into thePM-41 (2).
+
+![PU-41 (2)](https://github.com/kalymos/PsNee/blob/master/images/motherboard/PM-41%202.png)
+
+Installation tips
+Here are some tips I have for you when you are soldering your chip into the PM-41 (2).
+* Cut your wires to be as short and direct as possible.
+* You don’t need to connect pins one and two of the ATtinyX5 chip. Just desolder the wire.
+* Use a multimeter to probe around for alternative VCC and GND points closer to where you position your chip for a cleaner installation.
+* There may also be easier to solder to points for SQCT and SUBQ.
+* Be super careful when soldering SQCT and SUBQ. It’s easy to bridge pins if you aren’t careful.
+* Be careful with the DATA connection, it’s easy to accidentally knock the capacitor off the board.
\ No newline at end of file