From e5f1f2f499bb3bd26c3aa4eeff88e87b31257191 Mon Sep 17 00:00:00 2001 From: ken rector Date: Wed, 7 Sep 2022 08:44:55 -0700 Subject: [PATCH] Update README.md --- README.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 6434889..ad72ec1 100644 --- a/README.md +++ b/README.md @@ -13,7 +13,7 @@ After the PO tape installation finishes CP-V reports information about MEM SIZE, This CP-V installation is configured with hardwired communication lines that recquire a BREAK signal to start the LOGON process. To send a BREAK signal enter the telnet command mode by typing CTL-] and then the command 'send break'. To avoid this and set the communication lines to non-hardwired, enter simh and enter DEP 114a 0 to store 00000000 in the hardwired line flags as described in cpcpdoc.txt. This will set the first 32 lines to automatic mode and a logon prompt will be issued when they connect with telnet. -The system includes a :USERS file with account names and logon passwords. Follow Keiths instruction to run the PCL processor as a ghost job and backup and delete the :USRS file. The system will allow a logon from :SYS,LBE without a password if there is no :USERS file. +The system includes a :USERS file with account names and logon passwords. Follow Keiths instruction to run the PCL processor as a ghost job and backup and delete the :USRS file. The system will then allow a logon from :SYS,LBE without a password. Shut down CPV with the ZAP keyin at the opeeator console. Don't quit out of simh while CP-V is up if you can help it. @@ -28,3 +28,5 @@ HI, TCP-V HERE - ANDREWS C0F LOGON PLEASE: Telnet to one of the dedicated lines, 0-5, 10 will get you connected as a non-VT100 terminal. + +Check the Issues section of this repository for possible problems and work arounds.