diff --git a/data/arty_s7_50t.xdc b/data/arty_s7_50t.xdc
new file mode 100644
index 0000000..30e799b
--- /dev/null
+++ b/data/arty_s7_50t.xdc
@@ -0,0 +1,10 @@
+set_property -dict { PACKAGE_PIN R2  IOSTANDARD SSTL135  } [get_ports i_clk];   #IO_L12P_T1_MRCC_34 Sch=ddr3_clk[200]
+set_property -dict { PACKAGE_PIN C18 IOSTANDARD LVCMOS33 } [get_ports i_rst_n]; #IO_L11N_T1_SRCC_15
+
+set_property -dict { PACKAGE_PIN R12 IOSTANDARD LVCMOS33 } [get_ports q];       #IO_25_14 Sch=uart_rxd_out
+#set_property -dict { PACKAGE_PIN E18 IOSTANDARD LVCMOS33 } [get_ports q];       #IO_L16N_T2_A27_15 Sch=led[2]
+
+set_property CFGBVS VCCO [current_design]
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+
+create_clock -add -name sys_clk_pin -period 10.00 -waveform {0 5} [get_ports i_clk];
diff --git a/doc/servant.rst b/doc/servant.rst
index 503c111..ee85c9a 100644
--- a/doc/servant.rst
+++ b/doc/servant.rst
@@ -45,6 +45,14 @@ blinky.hex change D10 to H5 (led[4]) in data/arty_a7_35t.xdc).
 
     fusesoc run --target=arty_a7_35t servant
 
+Arty S7 50T
+^^^^^^^^^^^
+
+Pin R12 (uart_rxd_out) is used for UART output with 57600 baud rate (to use
+blinky.hex change R12 to E18 (led[4]) in data/arty_s7_50t.xdc).
+
+    fusesoc run --target=arty_s7_50t servant
+
 Chameleon96 (Arrow 96 CV SoC Board)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
diff --git a/servant.core b/servant.core
index 1689773..f00650c 100644
--- a/servant.core
+++ b/servant.core
@@ -60,6 +60,12 @@ filesets:
       - servant/servix.v : {file_type : verilogSource}
       - data/arty_a7_35t.xdc : {file_type : xdc}
 
+  arty_s7_50t:
+    files:
+      - servant/servix_clock_gen.v : {file_type : verilogSource}
+      - servant/servix.v : {file_type : verilogSource}
+      - data/arty_s7_50t.xdc : {file_type : xdc}
+
   ax309:
     files:
       - servant/servant_ax309_clock_gen.v : {file_type : verilogSource}
@@ -217,6 +223,14 @@ targets:
       vivado: {part : xc7a35ticsg324-1L}
     toplevel : servix
 
+  arty_s7_50t:
+    default_tool: vivado
+    filesets : [mem_files, soc, arty_s7_50t]
+    parameters : [memfile, memsize, frequency=16, "mdu? (MDU=1)", WITH_RESET]
+    tools:
+      vivado: {part : xc7s50csga324-1}
+    toplevel : servix
+
   ax309:
     default_tool : ise
     description : XILINX Spartan-6 XC6SLX9 FPGA Development Board