github.com/prirun.p50em
1
0
Fork 0
mirror of https://github.com/prirun/p50em.git synced 2026-01-11 23:42:56 +00:00
Code Issues Releases Wiki Activity
prirun.p50em/emdev.h

3537 lines
112 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* emdev.h, Jim Wilcoxson (prirun@gmail.com), April 17, 2005
Device handlers for pio instructions. Use devnull as a template for
new handlers.
NOTES:
OCP instructions never skip
SKS instructions skip on specified conditions
INA/OTA instructions skip if they succeed (data was read/written)
Device numbers:
'00 = polling (?)
'01 = paper tape reader
'02 = paper tape punch
'03 = #1 MPC/URC (line printer/card reader/card punch)
'04 = SOC/Option A/VCP board (system console/user terminal)
'05 = #2 MPC/URC (line printer/card reader/card punch)
'06 = card punch? (RTOS User Guide, A-1) / IPC (Engr Handbook p.101)
'06 = Interproc. Channel (IPC) (R20 Hacker's Guide)
'07 = #1 PNC
'10 = ICS2 #1 or ICS1
'11 = ICS2 #2 or ICS1
'12 = floppy disk/diskette (magtape controller #3 at rev 22.1?)
'13 = #2 magtape controller
'14 = #1 magtape controller
'15 = #5 AMLC or ICS1
'16 = #6 AMLC or ICS1
'17 = #7 AMLC or ICS1
'20 = control panel / real-time clock
'21 = 1st 4002 (Option B') disk controller
'22 = disk #3
'23 = disk #4
'24 = disk (was Writable Control Store)
'25 = disk (was 4000 disk controller)
'26 = #1 disk controller
'27 = #2 disk controller
'30-32 = BPIOC #1-3 (RTOS User Guide, A-1)
'32 = AMLC #8 or ICS1
'33 = #1 Versatec
'34 = #2 Versatec
'35 = #4 AMLC or ICS1
'36-37 = ELFBUS #1 & 2 (ICS1 #1, ICS1 #2)
'40 = A/D converter type 6000
'41 = digital input type 6020
'42 = digital input #2
'43 = digital output type 6040
'44 = digital output #2
'45 = disk (was D/A converter type 6060 (analog output) - obsolete)
'46 = disk
'47 = #2 PNC
'50 = #1 HSSMLC/MDLC (synchronous comm)
'51 = #2 HSSMLC/MDLC
'52 = #3 AMLC or ICS1
'53 = #2 AMLC
'54 = #1 AMLC
'55 = MACI autocall unit
'56 = old SMLC (RTOS User Guide, A-1 & Hacker's Guide)
'60-67 = reserved for user devices (GPIB)
'70-'73 = Megatek graphics terminals
'75-'76 = T$GPPI
Devices emulated by Primos in ks/ptrap.ftn for I/O instructions in Ring 3:
'01 = paper tape reader
'02 = paper tape punch
'04 = console
'20 = control panel lights & sense switches
*/
#include <errno.h>
#include <fcntl.h>
#include <sys/time.h>
#include <sys/select.h>
#include <unistd.h>
#include <termios.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <time.h>
#include <sys/file.h>
#include <glob.h>
/* this macro is used when I/O is successful. In VI modes, it sets
the EQ condition code bit. In SR modes, it does a skip */
#define IOSKIP \
if (crs[KEYS] & 010000) \
crs[KEYS] |= 0100; \
else \
RPL++
/* this macro is used to decide whether blocking should be enabled for
an I/O operation. The rules are:
- if process exchange is disabled then it's safe to block
- if the instruction (assumed to be I/O) is followed by JMP *-1 (SR
modes) or BCNE *-2 (VI modes), then it's okay to block
*/
#if 1
#define BLOCKIO \
(!(crs[MODALS] & 010) && (iget16(RP) == 03776 || (iget16(RP) == 0141603 && iget16(RP+1) == RPL-2)))
#else
#define BLOCKIO 0
#endif
/* this is a template for new device handlers */
int devnew (int class, int func, int device) {
switch (class) {
case -1:
return 0;
case 0:
TRACE(T_INST, " OCP '%02o%02o\n", func, device);
if (func == 99) {
;
} else {
printf("Unimplemented OCP device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 1:
TRACE(T_INST, " SKS '%02o%02o\n", func, device);
if (func == 99)
IOSKIP; /* assume it's always ready */
else {
printf("Unimplemented SKS device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 2:
TRACE(T_INST, " INA '%02o%02o\n", func, device);
if (func == 99) {
;
} else {
printf("Unimplemented INA device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 3:
TRACE(T_INST, " OTA '%02o%02o\n", func, device);
if (func == 99) {
IOSKIP;
} else {
printf("Unimplemented OTA device '%02o function '%02o, A='%o\n", device, func, crs[A]);
fatal(NULL);
}
break;
}
}
/* this is a template for null (not present) devices */
int devnone (int class, int func, int device) {
static int seen[64] = {64*0};
switch (class) {
case -1:
return 0;
case 0:
TRACE(T_INST, " OCP '%02o%02o\n", func, device);
break;
case 1:
TRACE(T_INST, " SKS '%02o%02o\n", func, device);
break;
case 2:
TRACE(T_INST, " INA '%02o%02o\n", func, device);
break;
case 3:
TRACE(T_INST, " OTA '%02o%02o\n", func, device);
break;
}
if (!seen[device])
fprintf(stderr, " pio to unimplemented device '%o, class '%o, func '%o\n", device, class, func);
seen[device] = 1;
}
/* Device '4: system console
NOTES:
- this driver only implements the basic needs of the system console
- needs to reset tty attributes when emulator shuts down
- Primos only handles ASRATE 110 (10cps), 1010 (30cps), 3410 (960 cps)
- input ID is wrong, causes OCP '0477 on clock interrupt
- issues with setting blocking flags & terminal attributes: doesn't block
OCP '0004 = initialize for input only, echoplex, 110 baud, 8-bit, no parity
OCP '0104 = same, but for output only
OCP '0204 = set receive interrupt mask
OCP '0304 = enable receive DMA/C
OCP '0404 = reset receive interrupt mask and DMA/C enable
OCP '0504 = set transmit interrupt mask
OCP '0604 = enable transmit DMA/C
OCP '0704 = reset transmit interrupt mask and DMA/C enable
OCP '1004 = Full duplex; software must echo
OCP '1104 = output a sync pulse (diagnostics)
OCP '1204 = Prime normal, independent xmit and recv w/echoplex
OCP '1304 = Self test mode (internally connects transmitter to receiver)
OCP '1504 = Set both xmit & rcv interrupt masks
OCP '1604 = Reset both xmit & rcv interrupt masks
OCP '1704 = same as '0004, but clears interrupt masks and dma/c enables
(this is the state after Master Clear)
SKS '0004 = skip if either receive or xmit ready, whichever are enabled
SKS '0104 = skip if not busy
SKS '0204 = skip if receiver not interrupting
SKS '0304 = skip if control registers valid
SKS '0404 = skip if neither xmit nor recv are interrupting
SKS '0504 = skip if xmit not interrupting
SKS '0604 = skip is xmit ready (can accept a character)
SKS '0704 = skip if recv ready (character present)
SKS '1104-'1404 = skip if input bit 1/2/3/4 marking
SKS '1504 = skip if parity error
SKS '1604 = skip if character overrun
SKS '1704 = skip if framing error
INA '0004 = "or" character into right byte of A, not modifying left byte
INA '0404 = input receive control register 1 (always works)
INA '0504 = input receive control register 2 (always works)
INA '0604 = input xmit control register 1 (always works)
INA '0704 = input xmit control register 2 (always works)
INA '1004 = like '0004, but clear A first
INA '1104 = input device ID
INA '1404 = input recv DMA/C channel address (these last 4 always work)
INA '1504 = input xmit DMA/C channel address
INA '1604 = input recv interrupt vector
INA '1704 = input xmit interrupt vector
OTA '0004 = xmit character from A; fails if inited for recv only
OTA '0404 = output rcv CR 1
OTA '0504 = output rcv CR 2
OTA '0604 = output xmit CR 1
OTA '0704 = output xmit CR 2
OTA '1404 = output recv DMA/C channel address (these last 4 always work)
OTA '1504 = output xmit DMA/C channel address
OTA '1604 = output recv interrupt vector
OTA '1704 = output xmit interrupt vector
*/
int devasr (int class, int func, int device) {
static initialized = 0;
static FILE *conslog;
static int ttydev;
static int ttyflags;
static int needflush; /* true if data has been written but not flushed */
static struct termios origterminfo, terminfo;
static fd_set fds;
static short vcptime[8] = {7*0, 1};
static short vcptimeix;
struct timeval timeout;
unsigned char ch;
int newflags;
int n;
int doblock;
time_t unixtime;
struct tm *tms;
doblock = BLOCKIO;
switch (class) {
case -2: /* cleanup */
if (!initialized) return;
if (tcsetattr(ttydev, TCSANOW, &origterminfo) == -1)
perror(" unable to reset tty attributes");
fclose(conslog);
break;
case -1: /* initialize */
setsid();
ttydev = open("/dev/tty", O_RDWR, 0);
if (ttydev < 0) {
perror(" error opening /dev/tty");
fatal(NULL);
}
if (fcntl(ttydev, F_GETFL, ttyflags) == -1) {
perror(" unable to get tty flags");
fatal(NULL);
}
FD_ZERO(&fds);
if (tcgetattr(ttydev, &terminfo) == -1) {
perror(" unable to get tty attributes");
fatal(NULL);
}
/* save initial terminal setup to restore when exiting */
origterminfo = terminfo;
/* NOTE: some of these are not restored by the host OS after the
emulator is suspended (VSUSP) then restarted, eg, the VSUSP and
VINTR characters */
terminfo.c_iflag &= ~(INLCR | ICRNL);
terminfo.c_lflag &= ~(ECHOCTL | ICANON);
terminfo.c_oflag &= ~(TOSTOP);
terminfo.c_cc[VINTR] = _POSIX_VDISABLE; /* use ^\ instead */
terminfo.c_cc[VSUSP] = '';
terminfo.c_cc[VMIN] = 0;
terminfo.c_cc[VTIME] = 0;
if (tcsetattr(ttydev, TCSANOW, &terminfo) == -1) {
perror(" unable to set tty attributes");
fatal(NULL);
}
/* ignore SIGTTIN in case the emulator is put in the background */
#ifdef OSX
signal(SIGTTIN, SIG_IGN);
#endif
/* open console log file and set to line buffering */
if ((conslog = fopen("console.log", "w")) == NULL) {
perror(" unable to open console log file");
fatal(NULL);
}
setvbuf(conslog, NULL, _IOLBF, 0);
initialized = 1;
return 0;
case 0:
TRACE(T_INST, " OCP '%02o%02o\n", func, device);
if (func == 010) /* enable full duplex */
terminfo.c_lflag &= ~ECHO;
else if (func == 012) /* enable "echoplex" */
terminfo.c_lflag |= ECHO;
if (func == 010 | func == 012) {
if (tcsetattr(ttydev, TCSANOW, &terminfo) == -1) {
perror(" unable to set tty attributes");
fatal(NULL);
}
} else
TRACEA("devasr: unrecognized OCP '%02o%02o\n", func, device);
break;
case 1:
TRACE(T_INST, " SKS '%02o%02o\n", func, device);
if (func == 6) { /* skip if room for a character */
if (crs[MODALS] & 010) /* PX enabled? */
timeout.tv_sec = 0; /* yes, can't delay */
else
timeout.tv_sec = 1; /* single user: okay to delay */
timeout.tv_usec = 0;
FD_SET(ttydev, &fds);
n = select(ttydev+1, NULL, &fds, NULL, &timeout);
if (n == -1) {
perror(" unable to do write select on tty");
fatal(NULL);
}
if (n) {
IOSKIP;
}
} else if (func == 7) { /* skip if received a char */
if (crs[MODALS] & 010) /* PX enabled? */
timeout.tv_sec = 0; /* yes, can't delay */
else {
timeout.tv_sec = 1; /* single user: okay to delay */
#if 0
fflush(gvp->tracefile); /* hack to flush for testing */
#endif
}
timeout.tv_usec = 0;
FD_SET(ttydev, &fds);
n = select(ttydev+1, &fds, NULL, NULL, &timeout);
if (n == -1) {
perror(" unable to do read select on tty");
fatal(NULL);
}
if (n) {
IOSKIP;
}
} else if (func <= 014)
IOSKIP; /* assume it's always ready */
break;
/* signal SIGTTIN is ignore during initialization, so if the
emulator is put in the background, read() will return EIO */
case 2:
TRACE(T_INST, " INA '%02o%02o\n", func, device);
//TRACE(T_INST, "INA, RPH=%o, RPL=%o, [RP]=%o, [RP+1]=%o, BLOCKIO=%d\n", RPH, RPL, iget16(RP), iget16(RP+1),BLOCKIO);
if (func == 0 || func == 010) { /* read a character */
if (doblock)
newflags = ttyflags & ~O_NONBLOCK;
else
newflags = ttyflags | O_NONBLOCK;
if (newflags != ttyflags && fcntl(ttydev, F_SETFL, newflags) == -1) {
perror(" unable to set tty flags");
fatal(NULL);
}
ttyflags = newflags;
#if 1
if (doblock)
fflush(gvp->tracefile); /* hack to flush for 32i testing */
#endif
if (doblock && needflush) {
if (fflush(stdout) == 0) {
needflush = 0;
devpoll[device] = 0;
}
fflush(conslog);
}
readasr:
n = read(ttydev, &ch, 1);
if (n == 0) {
if (doblock) {
usleep(500000);
goto readasr;
}
} else if (n < 0) {
if (errno != EAGAIN && errno != EIO) {
perror(" error reading from tty");
fatal(NULL);
}
} else if (n == 1) {
if (ch == '') {
printf("Trace owner = %o/%o\n", crs[OWNER], crs[OWNERL]);
if (gvp->savetraceflags == 0) {
TRACEA("\nTRACE ENABLED:\n\n");
gvp->savetraceflags = ~TB_MAP;
gvp->savetraceflags = ~0;
} else {
TRACEA("\nTRACE DISABLED:\n\n");
gvp->savetraceflags = 0;
}
fflush(gvp->tracefile);
goto readasr;
}
if (func >= 010)
crs[A] = 0;
crs[A] = crs[A] | ch;
TRACE(T_INST, " character read=%o: %c\n", crs[A], crs[A] & 0x7f);
if (!(terminfo.c_lflag & ECHO) && ch != 015) /* log all except CR */
fputc(ch, conslog);
fflush(conslog); /* immediately flush when typing */
fflush(gvp->tracefile);
IOSKIP;
} else {
printf("Unexpected error reading from tty, n=%d\n", n);
fatal(NULL);
}
} else if (04 <= func && func <= 07) { /* read control register 1/2 */
crs[A] = 0;
IOSKIP;
} else if (func == 011) { /* read device id? */
crs[A] = 4;
IOSKIP;
} else if (func == 012) { /* read control word */
crs[A] = 04110;
IOSKIP;
} else if (func == 017) { /* read xmit interrupt vector -OR- clock */
crs[A] = vcptime[vcptimeix++];
if (vcptimeix > 7)
vcptimeix = 0;
IOSKIP;
} else {
printf("Unimplemented INA '04 function '%02o\n", func);
fatal(NULL);
}
break;
case 3:
TRACE(T_INST, " OTA '%02o%02o\n", func, device);
if (func == 0) {
ch = crs[A] & 0x7f;
TRACE(T_INST, " char to write=%o: %c\n", crs[A], ch);
if (ch == 0 || ch == 0x7f) {
IOSKIP;
return;
}
#if 0
/* could do this here too, but Primos does it with SKS before
doing the OTA for the console, so it isn't really necessary.
Also, if done here, it might confused a program if SKS said
the character could be output, then OTA said it couldn't.
The program might stay in a tight OTA loop and hang the
machine until sys console output clears */
timeout.tv_sec = 0;
timeout.tv_usec = 0;
FD_SET(2, &fds);
n = select(2+1, NULL, &fds, NULL, &timeout);
if (n == -1) {
perror(" unable to do write select on stdout");
fatal(NULL);
}
if (!n)
return;
#endif
putchar(ch);
if (ch != 015)
putc(ch, conslog);
needflush = 1;
if (devpoll[device] == 0)
devpoll[device] = gvp->instpermsec*100;
IOSKIP;
} else if (func == 1) { /* write control word */
TRACEA("OTA 4, func %d, A='%o/%d\n", func, crs[A], *(short *)(crs+A));
IOSKIP;
} else if (04 <= func && func <= 07) { /* write control register 1/2 */
TRACEA("OTA 4, func %d, A='%o/%d\n", func, crs[A], *(short *)(crs+A));
IOSKIP;
} else if (func == 012) {
TRACEA("OTA 4, func %d, A='%o/%d\n", func, crs[A], *(short *)(crs+A));
/* NOTE: does this in rev 23 when system is shutdown with '4110 in A */
IOSKIP;
} else if (func == 013) {
TRACEA("OTA 4, func %d, A='%o/%d\n", func, crs[A], *(short *)(crs+A));
/* NOTE: does this in rev 20 on settime command (set clock on VCP?) */
IOSKIP;
} else if (func == 017) {
if (crs[A] == 0) {
/* setup to read VCP battery backup clock (only on certain models);
all words are 2 BCD digits */
#define BCD2(i) ((((i)/10)<<4) | ((i)%10))
unixtime = time(NULL);
tms = localtime(&unixtime);
vcptime[0] = BCD2(tms->tm_year);
vcptime[1] = BCD2(tms->tm_mon+1);
vcptime[2] = BCD2(tms->tm_mday);
vcptime[3] = BCD2(tms->tm_wday);
vcptime[4] = BCD2(tms->tm_hour);
vcptime[5] = BCD2(tms->tm_min);
vcptime[6] = BCD2(tms->tm_sec);
vcptime[7] = 0;
vcptimeix = 0;
} else {
TRACEA("OTA 4, func '%o, A='%o/%d\n", func, crs[A], *(short *)(crs+A));
}
IOSKIP;
} else {
printf("Unimplemented OTA device '%02o function '%02o, A='%o\n", device, func, crs[A]);
fatal(NULL);
}
break;
case 4:
/* tty output is blocking, even under Primos, which means that
writes and fflush can hang the entire system, eg, if XOFF
happens while writing to the console). Console output should
be changed to non-blocking one of these days... */
if (needflush) {
if (fflush(stdout) == 0)
needflush = 0;
else
devpoll[device] = gvp->instpermsec*100;
fflush(conslog);
}
}
}
/* Device '14 - magtape controller #1
NOTES:
This code only supports 1 tape controller (4 units), but could be
extended to support 2 controllers (eg, see disk controller code)
All tape files are assumed to be in SimH .TAP format:
- 4-bytes (little endian integer) indicating data record length (in bytes)
- n bytes of data
- repeat of the 4-byte data record length
- odd length records have a pad byte inserted
- if MSB of record length is set, there is an error in the record
- record length of zero indicates a file mark (doesn't repeat)
- record length of all 1's indicates end-of-tape mark (doesn't repeat)
Tape files are named according to the device and unit, like disk drives:
- dev14u0, dev14u1, dev14u2, dev14u3
These names are usually just links to the actual tape file.
Tape status word bits (MSB to LSB):
1 = Vertical Parity Error
2 = Runaway
3 = CRC Error
4 = LRCC Error
5 = False Gap or Insufficient DMX Range
6 = Uncorrectable Read Error
7 = Raw Erorr
8 = Illegal Command
9 = Selected Tape Ready (online and not rewinding)
10 = Selected Tape Online
11 = Selected Tape is at End Of Tape (EOT)
12 = Selected Tape is Rewinding
13 = Selected Tape is at Beginning Of Tape (BOT)
14 = Selected Tape is Write Protected
15 = DMX Overrun
16 = Rewind Interrupt
OTA '01 Motion control A-register bits:
1 = Select Tape Only
2 = 0 for File operation, 1 for Record operation
3 = 1 for Space operation
4 = 1 for Read & Correct
5 = 1 for 7-track
6 = 1 for 9-track
7 = unused
8 = 1 for 2 chars/word, 0 for 1 char/word (not supported here)
9-11 = motion: 100 = Forward, 010 = Reverse, 001 = Rewind
12 = 1 for Write
13 = 1 for Unit 0
14 = 1 for Unit 1
15 = 1 for Unit 2
16 = 1 for Unit 3
If the tape device file is empty, then BOT and EOT occur together.
But, this doesn't happen with real magtapes, and some Prime software
doesn't like it (Rev 23 Magsav+). So instead of returning EOT when
positioned to BOT, we return a read error, like a real tape would.
*/
int mtread (int fd, unsigned short *iobuf, int nw, int cmd, int *mtstat) {
unsigned char buf[4];
int n,reclen,reclen2,bytestoread;
TRACE(T_TIO, " mtread, nw=%d, initial tape status is 0x%04x\n", nw, *mtstat);
if (cmd & 0x80) { /* forward motion */
if (*mtstat & 0x20) /* already at EOT, can't read */
return 0;
n = read(fd, buf, 4);
TRACE(T_TIO, " mtread read foward, %d bytes for reclen\n", n);
if (n == 0) { /* now we're at EOT */
if (*mtstat & 0x8) /* were we at BOT? */
*mtstat |= 0x200; /* yes, return error instead of EOT */
else
*mtstat |= 0x20; /* no, EOT is okay now */
return 0;
}
*mtstat &= ~8; /* not at BOT now */
readerr:
if (n == -1) {
perror("Error reading from tape file");
*mtstat |= 0x200; /* raw error */
return 0;
}
if (n < 4) {
fprintf(stderr," only read %d bytes for reclen\n", n);
fmterr:
warn("Tape file isn't in .TAP format");
*mtstat |= 0x200; /* raw error */
return 0;
}
reclen = buf[0] | (buf[1]<<8) | (buf[2]<<16) | (buf[3]<<24);
TRACE(T_TIO, " mtread reclen = %d bytes\n", reclen);
if (reclen == 0) { /* hit a file mark */
*mtstat |= 0x100;
return 0;
}
if (reclen == 0xFFFF) { /* hit EOT mark */
/* NOTE: simh .tap doc says to backup here, probably to wipe out
EOT if more data is written. IMO, EOT should never be written
to simulated tape files. */
if ((n=lseek(fd, -4, SEEK_CUR)) == -1) {
perror("em: unable to backspace over EOT");
goto readerr;
}
*mtstat |= 0x20;
return 0;
}
if (reclen & 0x8000) { /* record marked in error */
/* NOTE: .tap may have non-zero record length here... */
*mtstat |= 0xB600; /* set all error bits */;
return 0;
}
if (reclen & 1)
warn("odd-length record in tape file!");
if (reclen < 0) {
fprintf(stderr," negative record length %d\n", reclen);
goto fmterr;
}
/* now either position or read forward */
if (cmd & 0x2000) { /* spacing only */
if ((n=lseek(fd, reclen, SEEK_CUR)) == -1) {
perror("em: unable to forward space record");
goto fmterr;
} else {
TRACE(T_TIO, " spaced forward %d bytes to position %d\n", reclen, n);
}
} else {
if ((reclen+1)/2 > nw) {
fprintf(stderr,"em: reclen = %d bytes in tape file - too big!\n", reclen);
*mtstat |= 2; /* set DMX overrun status */
bytestoread = nw*2;
} else {
bytestoread = reclen;
}
n = read(fd, iobuf, bytestoread);
TRACE(T_TIO, " mtread read %d/%d bytes of data \n", n, reclen);
if (n == -1) goto readerr;
if (n != bytestoread) goto fmterr;
if (bytestoread != reclen) { /* skip the rest of the record */
if ((n=lseek(fd, reclen-bytestoread, SEEK_CUR)) == -1) {
fprintf(stderr,"em: unable to handle large record\n");
goto readerr;
}
}
}
/* now get the trailing record length */
n = read(fd, buf, 4);
TRACE(T_TIO, " mtread read %d bytes for trailer reclen\n", n);
if (n == -1) goto readerr;
if (n != 4) goto fmterr;
reclen2 = buf[0] | (buf[1]<<8) | (buf[2]<<16) | (buf[3]<<24);
if (reclen2 != reclen) goto fmterr;
/* XXX: maybe should pad odd-length record with a zero... */
return (bytestoread+1)/2;
} else {
/* spacing backward, see if we're at BOT */
if (lseek(fd, 0, SEEK_CUR) == 0) {
*mtstat = (*mtstat | 8) & ~0x20; /* at BOT, clear EOT */
return 0;
}
/* backup 4 bytes, read reclen */
if (lseek(fd, -4, SEEK_CUR) == -1)
goto fmterr;
n = read(fd, buf, 4);
if (n == -1) goto readerr;
if (n != 4) goto fmterr;
reclen = buf[0] | (buf[1]<<8) | (buf[2]<<16) | (buf[3]<<24);
/* backup reclen+8 bytes unless this is a file mark, error,
or EOT */
if (reclen == 0) {
*mtstat |= 0x100; /* set filemark status */
goto repo;
}
if (reclen & 0x8000) /* error record (don't report) */
goto repo;
if (reclen == 0xFFFF) {
warn("em: devmt: read EOT backwards??");
reclen = 0;
goto repo;
}
if (lseek(fd, -(reclen+8), SEEK_CUR) == -1)
goto fmterr;
/* read leading reclen again to make sure we're positioned correctly */
n = read(fd, buf, 4);
if (n == -1) goto readerr;
if (n != 4) goto fmterr;
reclen2 = buf[0] | (buf[1]<<8) | (buf[2]<<16) | (buf[3]<<24);
if (reclen2 != reclen) goto fmterr;
/* finally, backup over the reclen to be positioned for read */
repo:
if ((n = lseek(fd, -4, SEEK_CUR)) == -1)
goto readerr;
if (n == 0)
*mtstat = (*mtstat | 8) & ~0x20; /* at BOT, clear EOT */
return 0;
}
}
int mtwrite (int fd, unsigned short *iobuf, int nw, int *mtstat) {
int n;
n = write(fd, iobuf, nw*2);
if (nw*2 != n) {
perror("Error writing to tape file");
fatal(NULL);
}
*mtstat &= ~8; /* not at BOT now */
}
int devmt (int class, int func, int device) {
static unsigned short mtvec = 0114; /* interrupt vector */
static unsigned short dmxchan = 0; /* dmx channel number */
static unsigned short datareg = 0; /* INA 00 data register */
static unsigned short ready = 0; /* true if INA 00 ready */
static unsigned short busy = 0; /* true if MPC busy */
static unsigned short enabled = 0; /* interrupts enabled */
static unsigned short interrupting = 0; /* 1 if pending, 2 if active */
static unsigned short usel = 0; /* last unit selected */
static struct {
int fd; /* tape file descriptor */
int mtstat; /* last tape status */
int firstwrite; /* true if next write is the first */
} unit[4];
int u;
char devfile[8];
/* the largest rec size Primos ever supported is 8K halfwords, plus
4 words for the 4-byte .TAP format record length at the beginning &
end of each record */
#define MAXTAPEWORDS 8*1024
unsigned short iobuf[MAXTAPEWORDS+4]; /* 16-bit WORDS! */
unsigned short *iobufp;
unsigned short dmxreg; /* DMA/C register address */
short dmxnch; /* number of DMX channels - 1 */
unsigned int dmxaddr;
unsigned long dmcpair;
short dmxnw, dmxtotnw;
int i,n;
char reclen[4];
unsigned short ioword;
switch (class) {
case -1: /* initialize emulator device */
for (u=0; u<4; u++) {
unit[u].fd = -1;
unit[u].mtstat = 0;
unit[u].firstwrite = 1;
}
return 0;
case 0:
TRACE(T_INST|T_TIO, " OCP '%02o%02o\n", func, device);
if (func == 012 || func == 013) { /* set normal/diag mode - ignored */
;
} else if (func == 014) { /* ack interrupt */
interrupting = 0;
} else if (func == 015) { /* set interrupt mask */
enabled = 1;
if (interrupting == 1) /* if interrupt is pending */
devpoll[device] = 10; /* try to interrupt soon */
} else if (func == 016) { /* reset interrupt mask */
enabled = 0;
} else if (func == 017) { /* initialize */
mtvec = 0114;
dmxchan = 0;
datareg = 0;
interrupting = 0;
enabled = 0;
ready = 0;
busy = 1;
usel = 0;
} else {
printf("Unimplemented OCP device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 1:
TRACE(T_INST|T_TIO, " SKS '%02o%02o\n", func, device);
if (func == 00) { /* skip if ready */
if (ready)
IOSKIP;
} else if (func == 01) { /* skip if not busy */
if (busy) /* return busy once after init */
busy = 0;
else
IOSKIP;
} else if (func == 04) { /* skip if not interrupting */
if (interrupting != 2)
IOSKIP;
} else {
printf("Unimplemented SKS device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 2:
/* according to version 0 controller docs, INA '014 should only
respond ready one time after an OTA '0214, and should respond
not ready otherwise (ie, the INA doesn't skip). But, this
causes Primos to lock up, spinning in an INA '014 loop, so the
emulator returns 0 on subsequent INA's */
TRACE(T_INST|T_TIO, " INA '%02o%02o\n", func, device);
if (func == 0) {
if (!ready) {
TRACE(T_INST|T_TIO, "INA 0 on tape device w/o matching OTA!\n");
crs[A] = 0;
} else {
TRACE(T_INST|T_TIO, " INA 0 returns '%06o 0x%04x\n", datareg, datareg);
crs[A] = datareg;
}
ready = 0;
IOSKIP;
} else {
printf("Unimplemented INA device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 3:
TRACE(T_INST|T_TIO, " OTA '%02o%02o, A='%06o %04x\n", func, device, crs[A], crs[A]);
if (func != 0)
busy = 0;
if (func == 00) {
datareg = crs[A];
IOSKIP;
} else if (func == 01) {
/* here's the hard part where everything happens... decode unit first */
u = crs[A] & 0xF;
if (u == 1) u = 3;
else if (u == 2) u = 2;
else if (u == 4) u = 1;
else if (u == 8) u = 0;
else
fatal("em: no unit selected on tape OTA '01");
usel = u;
/* XXX: if the tape device file changes (inode changes?), close
and re-open the file (new tape reel). Does offline need to
be reported at least once in this case? Or should it somehow
be related to rewinds? (only do the check at BOT?) */
#if 0
if (unit[u].mtstat & 8 && /* tape device file changed */) {
/* close tape fd if open & set to -1 */
}
#endif
/* if the tape file has never been opened, do it now. */
if (unit[u].fd == -1) {
unit[u].mtstat = 0;
unit[u].firstwrite = 1;
snprintf(devfile,sizeof(devfile),"dev%ou%d", device, u);
TRACE(T_TIO, " filename for tape dev '%o unit %d is %s\n", device, u, devfile);
/* XXX: add code for read-protected tapes */
if ((unit[u].fd = open(devfile, O_RDWR, 0770)) == -1) {
fprintf(stderr,"em: unable to open tape device file %s for device '%o unit %d for read/write\n", devfile, device, u);
IOSKIP;
break;
}
unit[u].mtstat = 0x00C8; /* Ready, Online, BOT */
}
/* "select only" is ignored. On a real tape controller, this
blocks (I think) if the previous tape operation is in progress */
if ((crs[A] & 0xFFF00) == 0x8000) {
TRACE(T_TIO, " select only\n");
IOSKIP;
break;
}
/* clear "last operation" error bits in mtstat, but preserve status
things like "at BOT", "at EOT", "write protected" */
unit[u].mtstat &= 0x00EC;
/* for rewind, read, write, & space, setup a completion interrupt */
interrupting = 1;
devpoll[device] = 10;
if ((crs[A] & 0x00E0) == 0x0020) { /* rewind */
//gvp->traceflags = ~TB_MAP;
TRACE(T_TIO, " rewind\n");
if (lseek(unit[u].fd, 0, SEEK_SET) == -1) {
perror("Unable to rewind tape drive file");
fatal(NULL);
}
unit[u].mtstat = 0x00D0; /* Ready, Online, Rewinding */
IOSKIP;
break;
}
/* Now we're reading, writing, or spacing either a record or file:
- space file/record, forward or backward = okay
- read record = okay, read file doesn't make sense
- write record = okay, write file = write file mark */
/* write file mark
NOTE: the tape file should probably be truncated on the first
write, not on each file mark, although this does let us
create garbage tape images for testing by doing a Magsav,
rewind, starting another Magsav, and aborting it. */
if ((crs[A] & 0x4010) == 0x0010) {
TRACE(T_TIO, " write file mark\n");
*(int *)iobuf = 0;
mtwrite(unit[u].fd, iobuf, 2, &unit[u].mtstat);
ftruncate(unit[u].fd, lseek(unit[u].fd, 0, SEEK_CUR));
IOSKIP;
break;
}
/* space forward or backward a record or file at a time */
if (crs[A] & 0x2000) { /* space operation */
if ((crs[A] & 0xC0) == 0)
warn("Motion = 0 for tape spacing operation");
else if (crs[A] & 0x4000) { /* record operation */
TRACE(T_TIO, " space record, dir=%x\n", crs[A] & 0x80);
mtread(unit[u].fd, iobuf, 0, crs[A], &unit[u].mtstat);
} else { /* file spacing operation */
TRACE(T_TIO, " space file, dir=%x\n", crs[A] & 0x80);
do {
mtread(unit[u].fd, iobuf, 0, crs[A], &unit[u].mtstat);
} while (!(unit[u].mtstat & 0x128)); /* FM, EOT, BOT */
}
IOSKIP;
break;
}
/* read/write backward aren't supported */
if (((crs[A] & 0x00E0) == 0x0040) && ((crs[A] & 0x2000) == 0)) {
warn("em: read/write reverse not supported for tapes");
unit[u].mtstat = 0;
IOSKIP;
break;
}
/* for read command, fill the io buffer first. Note that mtread
doesn't store record lengths in iobuf and the return value is
the actual data record length in words. It also ensures that
the return value is never > the # of words requested (MAXTAPEWORDS)
for write commands, the 4-byte .TAP record length IS stored in
iobuf and the length returned by mtwrite reflects that */
if (crs[A] & 0x10) { /* write record */
TRACE(T_TIO, " write record\n");
dmxtotnw = 0;
iobufp = iobuf+2;
} else {
TRACE(T_TIO, " read record\n");
dmxtotnw = mtread(unit[u].fd, iobuf, MAXTAPEWORDS, crs[A], &unit[u].mtstat);
iobufp = iobuf;
}
/* data transfer from iobuf (read) or to iobuf (write) */
while (1) {
dmxreg = dmxchan & 0x7FF;
if (dmxchan & 0x0800) { /* DMC */
dmcpair = get32io(dmxreg); /* fetch begin/end pair */
dmxaddr = dmcpair>>16;
dmxnw = (dmcpair & 0xffff) - dmxaddr + 1;
TRACE(T_INST|T_TIO, " DMC channels: ['%o]='%o, ['%o]='%o, nwords=%d", dmxreg, dmxaddr, dmxreg+1, (dmcpair & 0xffff), dmxnw);
} else { /* DMA */
dmxreg = dmxreg << 1;
dmxnw = regs.sym.regdmx[dmxreg];
dmxnw = -((dmxnw>>4) | 0xF000);
dmxaddr = ((regs.sym.regdmx[dmxreg] & 3)<<16) | regs.sym.regdmx[dmxreg+1];
TRACE(T_INST|T_TIO, " DMA channels: ['%o]='%o, ['%o]='%o/%o, nwords=%d", dmxreg, regs.sym.regdmx[dmxreg], dmxreg+1, dmxaddr>>16, dmxaddr&0xffff, dmxnw);
}
if (dmxnw < 0) { /* but is legal for >32K DMC transfer... */
printf("devmt: requested negative DMX of size %d\n", dmxnw);
fatal(NULL);
}
if (crs[A] & 0x10) { /* write record */
if (dmxtotnw+dmxnw > MAXTAPEWORDS)
fatal("Tape write is too big");
for (i=0; i < dmxnw; i++) {
ioword = get16io(dmxaddr+i);
#if 0
if (i%10 == 0)
TRACE(T_TIO, "\n %04d: ", i);
TRACE(T_TIO, " %03o %03o", (unsigned)ioword>>8, ioword&0xff);
#endif
*iobufp++ = ioword;
}
TRACE(T_TIO, "\n");
dmxtotnw = dmxtotnw + dmxnw;
} else {
if (dmxnw > dmxtotnw)
dmxnw = dmxtotnw;
for (i=0; i < dmxnw; i++) {
ioword = *iobufp++;
#if 0
if (i%10 == 0)
TRACE(T_TIO, "\n %04d: ", i);
TRACE(T_TIO, " %03o %03o", (unsigned)ioword>>8, ioword&0xff);
#endif
put16io(ioword, dmxaddr+i);
}
TRACE(T_TIO, "\n");
dmxtotnw = dmxtotnw - dmxnw;
}
TRACE(T_TIO, " transferred %d words\n", dmxnw);
if (dmxchan & 0x0800) { /* if DMC... */
put16io(dmxaddr+dmxnw, dmxreg); /* update starting address */
} else { /* if DMA...
regs.sym.regdmx[dmxreg] += (dmxnw<<4); /* increment # words */
regs.sym.regdmx[dmxreg+1] += dmxnw; /* increment address */
}
/* if chaining, bump channel number and decrement # channels */
if (dmxchan & 0xF000)
dmxchan = dmxchan + 2 - (1<<12);
else
break;
}
/* for write record, do the write */
if (crs[A] & 0x10) { /* write record */
n = dmxtotnw*2;
reclen[0] = n & 0xFF;
reclen[1] = n>>8 & 0xFF;
reclen[2] = n>>16 & 0xFF;
reclen[3] = n>>24 & 0xFF;
*(int *)iobuf = *(int *)reclen;
*(int *)(iobuf+2+dmxtotnw) = *(int *)reclen;
mtwrite(unit[u].fd, iobuf, dmxtotnw+4, &unit[u].mtstat);
} else { /* read record */
if (dmxtotnw > 0) {
TRACE(T_TIO, " DMA Overrun, lost %d words\n", dmxtotnw);
unit[u].mtstat |= 0x800;
}
}
IOSKIP;
break;
} else if (func == 02) {
ready = 1;
if (crs[A] & 0x8000) { /* status word 1 */
datareg = unit[usel].mtstat;
/* if the tape was rewinding, return rewinding status once, then
change it to BOT */
if (datareg & 0x10)
unit[usel].mtstat = unit[usel].mtstat & ~0x10 | 0x8;
} else if (crs[A] & 0x4000)
datareg = 0214; /* device ID */
else if (crs[A] & 0x2000)
datareg = dmxchan;
else if (crs[A] & 0x1000)
datareg = mtvec;
else if (crs[A] & 0x800)
datareg = 0; /* status word 2 */
else {
TRACE(T_TIO, " Bad OTA '02 to tape drive, A='%06o, 0x$04x\n", crs[A], crs[A]);
datareg = 0;
interrupting = 1;
devpoll[device] = 10;
}
TRACE(T_TIO, " setup INA 0, datareg='%06o, 0x%04x\n", datareg, datareg);
IOSKIP;
} else if (func == 03) { /* power on */
TRACE(T_TIO, " power on\n");
IOSKIP;
} else if (func == 05) { /* illegal - DIAG */
TRACE(T_TIO, " illegal DIAG OTA '05\n");
interrupting = 1;
devpoll[device] = 10;
IOSKIP;
} else if (func == 014) { /* set DMX channel */
dmxchan = crs[A];
TRACE(T_TIO, " dmx channel '%o, 0x%04x\n", dmxchan, dmxchan);
IOSKIP;
} else if (func == 015) { /* start u-code test */
TRACE(T_TIO, " u-code test\n");
IOSKIP;
} else if (func == 016) { /* set interrupt vector */
mtvec = crs[A];
TRACE(T_TIO, " set int vec '%o\n", mtvec);
IOSKIP;
} else {
printf("Unimplemented OTA device '%02o function '%02o, A='%o\n", device, func, crs[A]);
}
break;
case 4:
TRACE(T_TIO, " POLL device '%02o, enabled=%d, interrupting=%d\n", device, enabled, interrupting);
if (enabled && (interrupting == 1)) {
devpoll[device] = 100; /* assume interrupt will be deferred */
if (gvp->intvec == -1 && (crs[MODALS] & 0100000) && gvp->inhcount == 0) {
TRACE(T_TIO, " CPU interrupt to vector '%o\n", mtvec);
gvp->intvec = mtvec;
devpoll[device] = 0;
interrupting = 2;
}
}
}
}
/* Device '20: control panel switches and lights, and realtime clock
OCP '0020 = start Line Frequency Clock, enable mem increment, ack previous overflow (something else on VCP?)
OCP '0120 = ack PIC interrupt
OCP '0220 = stop LFC, disable mem increment, ack previous overflow
OCP '0420 = select LFC for memory increment (something else on VCP?)
OCP '0520 = select external clock for memory increment
OCP '0620 = starts a new 50-ms watchdog timeout interval
OCP '0720 = stops the watchdog timer
OCP '1520 = set interrupt mask
OCP '1620 = reset interrupt mask
OCP '1720 = initialize as in Master Clear
SKS '0020 = skip if clock IS interrupting
SKS '0220 = skip if clock IS NOT interrupting
SKS '0520 = skip if WDT timed out
SKS '0720 = skip if WDT caused external interrupt (loc '60)
OTA '0220 = set PIC Interval register (negative, interrupts on incr to zero)
OTA '0720 = set control register
OTA '1220 = set Memory Increment Cell address
OTA '1320 = set interrupt vector address
OTA '1720 = write to lights (sets CP fetch address)
INA '0220 = read PIC Interval register
INA '1120 = read device ID, don't clear A first
INA '1220 = read Memory Increment Cell address
INA '1320 = read interrupt vector address
INA '1420 = read location from CP ROM (not implemented, used to boot)
INA '1620 = read control panel up switches
INA '1720 = read control panel down switches
IMPORTANT NOTE 1: this device ('20) never skips!
IMPORTANT NOTE 2: when the emulator wakes up after the host system
suspends, devcp will either reset the clock (if it knows where
Primos' DATNOW variable is), or will make the clock tick faster
until it catches up to where it should be. Fake clock interrupts
are injected every 100 Prime instructions to catch up. These fast
interrupts can't occur too quickly (like every 10 Prime
instructions), because CLKDIM can't execute completely in 10
instructions and the repeated interrupts will eventually cause the
clock semaphore to overflow.
*/
/* initclock sets Primos' real-time clock variable */
initclock(ea_t datnowea) {
int datnow, i;
time_t unixtime;
struct tm *tms;
unixtime = time(NULL);
tms = localtime(&unixtime);
datnow = tms->tm_year<<25 | (tms->tm_mon+1)<<21 | tms->tm_mday<<16 | ((tms->tm_hour*3600 + tms->tm_min*60 + tms->tm_sec)/4);
put32r0(datnow, datnowea);
}
int devcp (int class, int func, int device) {
static short enabled = 0;
static unsigned short clkvec = 0;
static short clkpic = -947;
static float clkrate = 3.2;
static unsigned long ticks = -1;
static unsigned long absticks = -1;
static struct timeval start_tv;
static ea_t datnowea = 0;
static struct timeval prev_tv;
static unsigned long previnstcount=0; /* value of instcount corresponding to above */
struct timeval tv;
unsigned long elapsedms,targetticks;
int i;
#define SETCLKPOLL devpoll[device] = gvp->instpermsec*(-clkpic*clkrate)/1000;
switch (class) {
case -1:
/* if -map is used, lookup DATNOW symbol and set the 32-bit
Primos time value (DATNOW+TIMNOW) */
datnowea = 0;
for (i=0; i<numsyms; i++) {
if (strcmp(mapsym[i].symname, "DATNOW") == 0)
datnowea = mapsym[i].address;
}
return 0;
case 0:
TRACE(T_INST, " OCP '%02o%02o\n", func, device);
if (func == 00) { /* does something on VCP after OCP '0420 */
;
} else if (func == 01) { /* ack PIC interrupt */
;
} else if (func == 02) { /* stop LFC (IO.PNC DIAG) */
;
} else if (func == 04) { /* does something on VCP during boot */
;
} else if (func == 015) { /* set interrupt mask */
/* this enables tracing when the clock process initializes */
//gvp->traceflags = ~TB_MAP;
//TRACEA("Clock interrupt enabled!\n");
enabled = 1;
SETCLKPOLL;
ticks = -1;
} else if (func == 016 || func == 017) {
enabled = 0;
devpoll[device] = 0;
} else {
printf("Unimplemented OCP device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 1:
TRACE(T_INST, " SKS '%02o%02o\n", func, device);
printf("Unimplemented SKS device '%02o function '%02o\n", device, func);
fatal(NULL);
break;
case 2:
TRACE(T_INST, " INA '%02o%02o\n", func, device);
if (func == 011) { /* input ID */
crs[A] = 020; /* this is the Option-A board */
crs[A] = 0120; /* this is the SOC board */
//gvp->traceflags = ~TB_MAP;
} else if (func == 016) {
crs[A] = sswitch;
} else if (func == 017) { /* read switches pushed down */
crs[A] = 0;
} else {
printf("Unimplemented INA device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 3:
TRACE(T_INST, " OTA '%02o%02o\n", func, device);
/* standard Primos always sets a PIC interval of 947 and uses the
hardware clock rate of 3.2 usec. This causes a software interrupt
every 947*3.2 usec, or 3030.4 milliseconds, and this works out
to 330 software interrupts per second. BUT newer machines tick
at whatever rate they want and ignore the PIC interval set here.
To keep emulator overhead low, some versions of Primos have been
modified to set the PIC interval to 15625 and send 20 ticks per
second to Primos.
To handle both cases, this code looks at the cpuid to determine
the actual # of ticks per second expected by Primos whenever
the PIC interval is set to 947. If PIC is set to something
other than 947, that value is used.
*/
if (func == 02) { /* set PIC interval */
clkpic = *(short *)(crs+A);
if (clkpic == -947)
if (cpuid == 11 || cpuid == 20)
clkpic = -625; /* P2250: 500 ticks/second */
else if (cpuid >= 15) /* newer machines: 250 ticks/second */
clkpic = -1250;
TRACE(T_INST, "Clock PIC %d requested, set to %d\n", *(short *)(crs+A), clkpic);
SETCLKPOLL;
} else if (func == 07) {
TRACE(T_INST, "Clock control register set to '%o\n", crs[A]);
if (crs[A] & 020)
clkrate = 102.4;
else
clkrate = 3.2;
SETCLKPOLL;
} else if (func == 013) { /* set interrupt vector */
clkvec = crs[A];
TRACE(T_INST, "Clock interrupt vector address = '%o\n", clkvec);
} else if (func == 017) { /* write lights */
} else {
printf("Unimplemented OTA device '%02o function '%02o, A='%o\n", device, func, crs[A]);
fatal(NULL);
}
break;
/* Clock poll important considerations are:
1. ticks = -1 initially; this triggers initialization here
2. start_tv corresponds to the time where ticks = 0
3. if the clock gets out of sync, it ticks faster or slower until
it is right
4. if the clock is WAY out of sync, try to jump to the correct time
5. once the clock is in sync, reset start_tv if ticks gets too big
(uh, after 5 months!) to prevent overflows in time calculations
*/
case 4:
/* interrupt if enabled and no interrupt active */
if (enabled) {
if (gvp->intvec == -1) {
gvp->intvec = clkvec;
SETCLKPOLL;
ticks++;
if (gettimeofday(&tv, NULL) != 0)
fatal("em: gettimeofday 3 failed");
if (ticks == 0) {
start_tv = tv;
prev_tv = tv;
previnstcount = gvp->instcount;
if (datnowea != 0)
initclock(datnowea);
}
elapsedms = (tv.tv_sec-start_tv.tv_sec-1)*1000 + (tv.tv_usec+1000000-start_tv.tv_usec)/1000;
targetticks = elapsedms/(-clkpic*clkrate/1000);
#if 0
absticks++;
if (absticks%1000 == 0 || abs(ticks-targetticks) > 5)
printf("\nClock check: target=%d, ticks=%d\n", targetticks, ticks);
#endif
/* if the clock gets way out of whack (eg, because of a host
suspend), reset it IFF datnowea is set. This causes an
immediate jump to the correct time. If datnowea is not
available (no Primos maps), then we have to tick our way to
the correct time. In addition to lowering overhead, slower
clock tick rates make catching up much faster. */
if (abs(ticks-targetticks) > 5000 && datnowea != 0)
ticks = -1;
else if (ticks < targetticks)
devpoll[device] = 100; /* behind, so catch-up */
else if (ticks > targetticks)
devpoll[device] = devpoll[device]*2; /* ahead, so slow down */
else { /* just right! */
if (ticks > 1000000000) { /* after a long time, */
start_tv = tv; /* reset tick vars */
ticks = 0;
}
}
/* update instpermsec every 5 seconds
NB: this should probably be done whether the clock is running
or not */
if (gvp->instcount-previnstcount > gvp->instpermsec*1000*5) {
gvp->instpermsec = (gvp->instcount-previnstcount) /
((tv.tv_sec-prev_tv.tv_sec-1)*1000 + (tv.tv_usec+1000000-prev_tv.tv_usec)/1000);
//printf("instcount = %d, previnstcount = %d, diff=%d, instpermsec=%d\n", gvp->instcount, previnstcount, gvp->instcount-previnstcount, gvp->instpermsec);
printf("\ninstpermsec=%d\n", gvp->instpermsec);
previnstcount = gvp->instcount;
prev_tv = tv;
}
} else {
devpoll[device] = 100; /* couldn't interrupt, try again soon */
}
}
break;
}
}
/* helper function to return a disk's file name given a controller and unit */
int globdisk (char *devfile, int size, int device, int unit) {
glob_t g;
int globerr;
snprintf(devfile, size, "dev%ou%d.*", device, unit);
if ((globerr=glob(devfile, GLOB_ERR|GLOB_NOSORT, NULL, &g)) != 0) {
fprintf(stderr,"globdisk: glob returned %d opening %s\n", globerr, devfile);
return -1;
}
if (g.gl_pathc != 1) {
fprintf(stderr,"globdisk: %d matches for %s\n", g.gl_pathc, devfile);
return -1;
}
strncpy(devfile, g.gl_pathv[0], size);
devfile[size-1] = 0;
TRACE(T_INST|T_DIO, " filename for dev '%o unit %d is %s\n", device, unit, devfile);
return 0;
}
/* disk controller at '26 and '27
NOTES:
- in the DSEL disk channel program command, unit number is a 4-bit field,
with these binary values:
0001 = unit 0 (pdev 460/461)
0010 = unit 1 (pdev 462/463)
0100 = unit 2 (pdev 464/465)
1000 = unit 3 (pdev 466/467)
OCP '1626 = reset interrupt
OCP '1726 = reset controller
INA '0626 = ??
INA '1126 = input ID, don't clear A first, fails if no controller
- bits 1,2,8-16 are significant, bits 8-9 are type, 10-16 are ID
- 4004 controller responds '26 (type=0)
- 4005 controller responds '126 (type=1)
- 2382 controller responds '040100 (type=1)
- LCDTC controller responds '226 (type=2)
- 10019 controller responds '040100 (type=1)
- 6590 controller responds '040100 (type=1)
INA '1726 = read oar, fails if controller is not halted
OTA '1726 = load OAR (Order Address Register), ie, run channel
program, address is in A
*/
int devdisk (int class, int func, int device) {
/* static structure for disk file suffixes and config data */
#define NUMGEOM 24
static struct {
short model;
char suffix[5];
short heads;
short spt;
short maxtrack;
} geom[NUMGEOM] = {
1, "80M", 5, 9, 823,
1, "300M", 19, 9, 823,
0, "CMD", 20, 9, 823,
4, "68M", 3, 9, 1119,
5, "158M", 7, 9, 1119,
6, "160M", 10, 9, 821,
7, "675M", 40, 9, 841,
7, "600M", 40, 9, 841,
9, "315M", 19, 9, 823, /* MODEL_4475 */
10, "84M", 5, 8, 1015, /* MODEL_4714 */
11, "60M", 4, 7, 1020, /* MODEL_4711 */
12, "120M", 8, 7, 1020, /* MODEL_4715 */
13, "496M", 24, 14, 711, /* MODEL_4735 */
14, "258M", 17, 6, 1220, /* MODEL_4719 */
15, "770M", 23, 19, 848, /* MODEL_4845 */
17, "328A", 12, 8, 1641, /* MODEL_4721 */
17, "328B", 31, 254, 20, /* MODEL_4721 (7210 SCSI controller) */
18, "817M", 15, 19, 1379, /* MODEL_4860 */
19, "673M", 31, 254, 42, /* MODEL_4729 */
20, "213M", 31, 254, 14, /* MODEL_4730 */
22, "421M", 31, 254, 26, /* MODEL_4731 */
23, "1.3G", 31, 254, 82, /* MODEL_4732 */
24, "1G", 31, 254, 65, /* MODEL_4734 */
25, "2G", 31, 254, 122, /* MODEL_4736 */
};
#define S_HALT 0
#define S_RUN 1
#define S_INT 2
#define MAXDRIVES 8
#define HASHMAX 4451
#if 0
#define CID4005 0100
#else
#define CID4005 0
#endif
static struct {
unsigned short oar;
unsigned short state; /* channel program state: S_XXXX */
unsigned short status; /* controller status */
short usel; /* unit selected (0-3, -1=none) */
short dmachan; /* dma channel selected */
short dmanch; /* number of dma channels-1 */
struct {
int rtfd; /* read trace file descriptor */
short heads; /* total heads */
short spt; /* sectors per track */
short maxtrack; /* cylinder limit */
short curtrack; /* current head position */
short wp; /* true if write protected */
int devfd; /* Unix device file descriptor */
int readnum; /* increments on each read */
unsigned char** modrecs; /* hash table of modified records */
} unit[MAXDRIVES];
} dc[64];
short i,u;
/* temps for running channel programs */
unsigned short order;
unsigned short m,m1,m2;
short head, track, rec, recsize, nwords;
unsigned short dmareg;
unsigned int dmaaddr;
unsigned char *hashp;
int lockkey;
unsigned short iobuf[1040]; /* local I/O buf (for mapped I/O) */
unsigned short *iobufp;
unsigned short access;
short dmanw, dmanw1, dmanw2;
unsigned int utempl;
char ordertext[8];
int phyra;
int nb; /* number of bytes returned from read/write */
char devfile[16];
char rtfile[16]; /* read trace file name */
int rtnw; /* total number of words read (all channels) */
//gvp->traceflags |= TB_DIO;
switch (class) {
case -1:
#ifdef DISKSAFE
printf("em: Running in DISKSAFE mode; no changes will be permanent\n");
#endif
for (i=0; i<64; i++) {
dc[i].state = S_HALT;
dc[i].status = 0100000;
dc[i].usel = -1;
for (u=0; u<MAXDRIVES; u++) {
dc[i].unit[u].rtfd = -1;
dc[i].unit[u].heads = -1;
dc[i].unit[u].spt = -1;
dc[i].unit[u].maxtrack = -1;
dc[i].unit[u].curtrack = -1;
dc[i].unit[u].wp = -1;
dc[i].unit[u].devfd = -1;
dc[i].unit[u].readnum = -1;
dc[i].unit[u].modrecs = NULL;
}
}
return 0;
case 0:
TRACE(T_INST|T_DIO, " OCP '%2o%2o\n", func, device);
if (func == 016) { /* reset interrupt */
if (dc[device].state == S_INT) {
dc[device].state = S_RUN;
devpoll[device] = 1;
}
} else if (func == 017) { /* reset controller */
dc[device].state = S_HALT;
dc[device].status = 0100000;
dc[device].usel = -1;
} else {
printf(" Unrecognized OCP '%2o%2o\n", func, device);
fatal(NULL);
}
break;
case 1:
TRACE(T_INST|T_DIO, " SKS '%2o%2o\n", func, device);
if (func == 04) { /* skip if not interrupting */
if (dc[device].state != S_INT)
IOSKIP;
} else {
printf(" Unrecognized SKS '%2o%2o\n", func, device);
fatal(NULL);
}
break;
case 2:
TRACE(T_INST|T_DIO, " INA '%2o%2o\n", func, device);
/* this turns tracing on when the Primos disk processes initialize */
//gvp->traceflags = ~TB_MAP;
/* INA's are only accepted when the controller is not busy */
if (dc[device].state != S_HALT)
return;
if (func == 01) /* read device id, clear A first */
crs[A] = CID4005 + device;
else if (func == 011) /* read device id, don't clear A */
crs[A] |= (CID4005 + device);
else if (func == 017) { /* read OAR */
crs[A] = dc[device].oar;
} else {
printf("Unimplemented INA device '%02o function '%02o\n", device, func);
fatal(NULL);
}
IOSKIP;
break;
case 3:
TRACE(T_INST|T_DIO, " OTA '%02o%02o\n", func, device);
if (func == 017) { /* set OAR (order address register) */
dc[device].state = S_RUN;
dc[device].oar = crs[A];
devpoll[device] = 1;
} else {
printf("Unimplemented OTA device '%02o function '%02o, A='%o\n", device, func, crs[A]);
fatal(NULL);
}
IOSKIP;
break;
case 4: /* poll (run channel program) */
while (dc[device].state == S_RUN) {
m = get16io(dc[device].oar);
m1 = get16io(dc[device].oar+1);
TRACE(T_INST|T_DIO, "\nDIOC %o: %o %o %o\n", dc[device].oar, m, m1, get16io(dc[device].oar+2));
dc[device].oar += 2;
order = m>>12;
/* this is for conditional execution, and needs some work... */
if (m & 04000) { /* "execute if ..." */
if (order == 2 || order == 5 || order == 6)
dc[device].oar++;
continue;
}
switch (order) {
case 0: /* DHLT = Halt */
dc[device].state = S_HALT;
devpoll[device] = 0;
TRACE(T_INST|T_DIO, " channel halted at '%o\n", dc[device].oar);
break;
case 2: /* SFORM = Format */
case 5: /* SREAD = Read */
case 6: /* SWRITE = Write */
dc[device].status &= ~076000; /* clear bits 2-6 */
m2 = get16io(dc[device].oar++);
recsize = m & 017;
track = m1 & 03777;
rec = m2 >> 8; /* # records for format, rec # for R/W */
head = m2 & 077;
u = dc[device].usel;
if (order == 2)
strcpy(ordertext,"Format");
else if (order == 5)
strcpy(ordertext,"Read");
else if (order == 6)
strcpy(ordertext,"Write");
TRACE(T_INST|T_DIO, "%s, head=%d, track=%d, rec=%d, recsize=%d\n", ordertext, head, track, rec, recsize);
if (u == -1) {
fprintf(stderr," Device '%o, order %d with no unit selected\n", device, order);
dc[device].status |= 2; /* select error (right?)... */
break;
}
if (recsize != 0) {
fprintf(stderr," Device '%o, order %d, recsize=%d\n", device, order, recsize);
dc[device].status |= 02000; /* header check (right error?) */
break;
}
#if 0
/* this has been disabled because preseeks in the disk driver sometimes
goof up, depending on timings in the emulator */
if (track != dc[device].unit[u].curtrack) {
fprintf(stderr," Device '%o, order %d at track %d, but positioned to track %d\n", device, order, track, dc[device].unit[u].curtrack);
dc[device].status |= 4; /* illegal seek */
break;
}
#endif
if (track > dc[device].unit[u].maxtrack) {
fprintf(stderr," Device '%o, unit %d, seek to track %d > cylinder limit of %d\n", device, u, track, dc[device].unit[u].maxtrack);
fatal("Invalid seek");
}
/* XXX: could check for head > max head on drive here... */
if (dc[device].unit[u].devfd == -1) {
TRACE(T_INST|T_DIO, " Device '%o unit %d not ready\n", device, u);
dc[device].status = 0100001;
} else if (order == 2) {
TRACE(T_INST|T_DIO, " Format order\n");
//fatal("DFORMAT channel order not implemented");
} else { /* order = 5 (read) or 6 (write) */
/* translate head/track/sector to drive record address */
phyra = (track*dc[device].unit[u].heads*dc[device].unit[u].spt) + head*dc[device].unit[u].spt + rec;
TRACE(T_INST|T_DIO, " Unix ra=%d, byte offset=%d\n", phyra, phyra*2080);
/* XXX: check for phyra > 1032444, which is > 2GB max file size */
/* does this record exist in the disk unit hash table? If it does,
we'll do I/O to the hash entry. If it doesn't, then for read,
go to the disk file; for write, make a new hash entry */
hashp = NULL;
#ifdef DISKSAFE
//fprintf(stderr," R/W, modrecs=%p\n", dc[device].unit[u].modrecs);
for (hashp = dc[device].unit[u].modrecs[phyra%HASHMAX]; hashp != NULL; hashp = *((unsigned char **)hashp)) {
//fprintf(stderr," lookup, hashp=%p\n", hashp);
if (phyra == *((int *)(hashp+sizeof(void *))))
break;
}
//fprintf(stderr,"After search, hashp=%p\n", hashp);
if (hashp == NULL)
if (order == 5) { /* read */
#endif
if (lseek(dc[device].unit[u].devfd, phyra*2080, SEEK_SET) == -1) {
fprintf(stderr,"devdisk: seek error, phyra=%d\n", phyra);
perror("Unable to seek drive file");
fatal(NULL);
}
#ifdef DISKSAFE
} else { /* write */
hashp = malloc(1040*2 + sizeof(void*) + sizeof(int));
*(unsigned char **)hashp = dc[device].unit[u].modrecs[phyra%HASHMAX];
*((int *)(hashp+sizeof(void *))) = phyra;
//fprintf(stderr," Write, new hashp = %p, old bucket head = %p\n", hashp, *(unsigned char **)hashp);
dc[device].unit[u].modrecs[phyra%HASHMAX] = hashp;
hashp = hashp + sizeof(void*) + sizeof(int);
}
else
hashp = hashp + sizeof(void*) + sizeof(int);
//fprintf(stderr," Before disk op %d, hashp=%p\n", order, hashp);
#endif
while (dc[device].dmanch >= 0) {
dmareg = dc[device].dmachan << 1;
dmanw = regs.sym.regdmx[dmareg];
dmanw = -(dmanw>>4);
if (dmanw > 1040) {
warn("disk I/O limited to 1040 words");
dmanw = 1040;
}
if (dmanw < 0) {
warn("disk I/O size < 0; set to 0");
dmanw = 0;
}
dmaaddr = ((regs.sym.regdmx[dmareg] & 3)<<16) | regs.sym.regdmx[dmareg+1];
TRACE(T_INST|T_DIO, " DMA channels: nch-1=%d, ['%o]='%o, ['%o]='%o, nwords=%d\n", dc[device].dmanch, dc[device].dmachan, regs.sym.regdmx[dmareg], dc[device].dmachan+1, dmaaddr, dmanw);
if (order == 5) {
if (crs[MODALS] & 020)
if ((dmaaddr & 01777) || dmanw > 1024)
iobufp = iobuf;
else
iobufp = mem+mapio(dmaaddr);
else
iobufp = mem+dmaaddr;
if (hashp != NULL) {
memcpy((char *)iobufp, hashp, dmanw*2);
hashp += dmanw*2;
} else if ((nb=read(dc[device].unit[u].devfd, (char *)iobufp, dmanw*2)) != dmanw*2) {
fprintf(stderr, "Disk read error: device='%o, u=%d, fd=%d, nb=%d\n", device, u, dc[device].unit[u].devfd, nb);
if (nb == -1) perror("Unable to read drive file");
memset((char *)iobufp, 0, dmanw*2);
}
if (iobufp == iobuf)
for (i=0; i<dmanw; i++)
put16io(iobuf[i], dmaaddr+i);
} else {
if (crs[MODALS] & 020) {
iobufp = iobuf;
for (i=0; i<dmanw; i++)
iobuf[i] = get16io(dmaaddr+i);
} else
iobufp = mem+dmaaddr;
if (hashp != NULL) {
memcpy(hashp, (char *)iobufp, dmanw*2);
hashp += dmanw*2;
} else if (write(dc[device].unit[u].devfd, (char *)iobufp, dmanw*2) != dmanw*2) {
perror("Unable to write drive file");
fatal(NULL);
}
}
regs.sym.regdmx[dmareg] = 0;
regs.sym.regdmx[dmareg+1] += dmanw;
dc[device].dmachan += 2;
dc[device].dmanch--;
}
}
break;
case 3: /* SSEEK = Seek */
u = dc[device].usel;
if (u == -1) {
fprintf(stderr," Device '%o, order %d with no unit selected\n", device, order);
dc[device].status |= 2; /* select error (right?)... */
break;
}
dc[device].status &= ~4; /* clear bit 14: seek error */
if (m1 & 0100000) {
track = 0;
} else {
track = m1 & 03777;
}
TRACE(T_INST|T_DIO, " seek track %d, restore=%d, clear=%d\n", track, (m1 & 0100000) != 0, (m1 & 040000) != 0);
#if 0
/* this has been disabled because SCSI drives sometimes seek to
track 512 (special meaning in controller?) */
if (track > dc[device].unit[u].maxtrack) {
fprintf(stderr," Device '%o, unit %d, seek to track %d > cylinder limit of %d\n", device, u, track, dc[device].unit[u].maxtrack);
dc[device].status |= 4; /* set bit 14: seek error */
track = -1;
}
#endif
dc[device].unit[u].curtrack = track;
break;
case 4: /* DSEL = Select unit */
u = (m1 & 0377); /* get unit bits */
dc[device].usel = -1; /* de-select */
if (u == 0) {
TRACE(T_INST|T_DIO, " de-select\n");
break;
}
dc[device].status &= ~3; /* clear 15-16: select err + unavailable */
if (u == 1) u = 0;
else if (u == 2) u = 1;
else if (u == 4) u = 2;
else if (u == 8) u = 3;
else if (u == 16) u = 4;
else if (u == 32) u = 5;
else if (u == 64) u = 6;
else if (u == 128) u = 7;
else {
fprintf(stderr," Device '%o, bad select '%o\n", device, u);
dc[device].status |= 0100002; /* set bit 15: select error */
break;
}
TRACE(T_INST|T_DIO, " select unit %d\n", u);
dc[device].usel = u;
if (dc[device].unit[u].devfd == -1) {
if (globdisk(devfile, sizeof(devfile), device, u) != 0) {
dc[device].status |= 0100001; /* set bit 16: not ready */
break;
}
if ((dc[device].unit[u].devfd = open(devfile, O_RDWR)) == -1) {
if ((dc[device].unit[u].devfd = open(devfile, O_RDONLY)) == -1) {
fprintf(stderr, "em: unable to open disk device file %s for device '%o unit %d; flagging \n", devfile, device, u);
dc[device].status = 0100001; /* not ready */
break;
} else {
lockkey = LOCK_SH;
dc[device].unit[u].wp = 1;
}
} else {
lockkey = LOCK_EX;
dc[device].unit[u].wp = 0;
}
/* determine geometry from disk file suffix */
for (i=0; i < NUMGEOM; i++)
if (strcasestr(devfile, geom[i].suffix)) {
dc[device].unit[u].heads = geom[i].heads;
dc[device].unit[u].spt = geom[i].spt;
dc[device].unit[u].maxtrack = geom[i].maxtrack;
break;
}
if (i == NUMGEOM) {
fprintf(stderr, "em: unknown geometry for %s\n", devfile);
close(dc[device].unit[u].devfd);
dc[device].unit[u].devfd = -1;
dc[device].status = 0100001; /* not ready */
break;
}
#ifdef DISKSAFE
if (flock(dc[device].unit[u].devfd, LOCK_SH+LOCK_NB) == -1)
fatal("Disk drive file is in use");
dc[device].unit[u].modrecs = calloc(HASHMAX, sizeof(void *));
//fprintf(stderr," Device '%o, unit %d, modrecs=%p\n", device, u, dc[device].unit[u].modrecs);
#else
if (flock(dc[device].unit[u].devfd, lockkey+LOCK_NB) == -1)
fatal("Disk drive file is in use");
#endif
}
break;
case 7: /* DSTALL = Stall */
TRACE(T_INST|T_DIO, " stall\n");
/* NOTE: technically, the stall command is supposed to wait
210 usecs, so that the disk controller doesn't hog the I/O
bus by looping in a channel program waiting for I/O to
complete. With the emulator, this delay isn't necessary,
although it will cause DIAG tests to fail if the delay is
omitted. Hence the PX test. Ignoring stall gives a 25%
increase in I/O's per second on a 2GHz Mac (8MB emulator). */
if (crs[MODALS] & 010) /* PX enabled? */
break; /* yes, no stall */
devpoll[device] = gvp->instpermsec/5; /* 200 microseconds, sb 210 */
return;
case 9: /* DSTAT = Store status to memory */
TRACE(T_INST|T_DIO, " store status='%o to '%o\n", dc[device].status, m1);
put16io(dc[device].status,m1);
break;
case 11: /* DOAR = Store OAR to memory (2 words) */
TRACE(T_INST|T_DIO, " store OAR='%o to '%o\n", dc[device].oar, m1);
put16io(dc[device].oar,m1);
break;
case 13: /* SDMA = select DMA channel(s) to use */
dc[device].dmanch = m & 017;
dc[device].dmachan = m1;
TRACE(T_INST|T_DIO, " set DMA channels, nch-1=%d, channel='%o\n", dc[device].dmanch, dc[device].dmachan);
break;
case 14: /* DINT = generate interrupt through vector address */
TRACE(T_INST|T_DIO, " interrupt through '%o\n", m1);
if (gvp->intvec >= 0 || !(crs[MODALS] & 0100000) || gvp->inhcount > 0)
dc[device].oar -= 2; /* can't take interrupt right now */
else {
gvp->intvec = m1;
dc[device].state = S_INT;
}
//gvp->traceflags = ~TB_MAP;
devpoll[device] = 10;
return;
case 15: /* DTRAN = channel program jump */
dc[device].oar = m1;
TRACE(T_INST|T_DIO, " jump to '%o\n", m1);
break;
default:
/* NOTE: orders 1 & 8 are supposed to halt the channel program
but leave the controller busy (model 4004).
Orders 10 & 12 (Store/Load) are not implemented */
printf("Unrecognized channel order = %d\n", order);
fatal(NULL);
}
}
}
}
/*
AMLC I/O operations:
OCP '0054 - stop clock
OCP '0154 - single step clock
OCP '1234 - set normal/DMT mode
OCP '1354 - set diagnostic/DMQ mode
OCP '1554 - enable interrupts
OCP '1654 - disable interrupts
OCP '1754 - initialize AMLC
SKS '0454 - skip if NOT interrupting
INA '0054 - input data set sense bit for all lines (read clear to send)
INA '0754 - input AMLC status and clear (always skips)
INA '1154 - input AMLC controller ID
INA '1454 - input DMA/C channel number
INA '1554 - input DMT/DMQ base address
INA '1654 - input interrupt vector address
OTA '0054 - output line number for INA '0054 (older models only)
OTA '0154 - output line configuration for 1 line
OTA '0254 - output line control for 1 line
OTA '1454 - output DMA/C channel number
OTA '1554 - output DMT/DMQ base address
OTA '1654 - output interrupt vector address
OTA '1754 - output programmable clock constant
Primos AMLC usage:
OCP '17xx
- initialize controller
- clear all registers and flip-flops
- start line clock
- clear all line control bits during the 1st line scan
- responds not ready until 1 line scan is complete
INA '11xx
- read AMLC ID
- emulator always returns '20054 (DMQ, 16 lines)
OTA '17xx
- set AMLC programmable clock constant
- ignored by the emulator
OTA '14xx
- set DMC channel address for double input buffers
- emulator stores in a structure
OCP '13xx
- set dmq mode (used to be "set diagnostic mode")
- ignored by the emulator
OTA '15xx
- set DMT Base Address
- also used for DMQ address?
- emulator stores in a structure
OTA '16xx
- set interrupt vector address
- emulator stores in a structure
OTA '01xx
- set line configuration
- emulator ignores: all lines are 8-bit raw
OTA '02xx
- set line control
- emulator ignores: all lines are enabled
OCP '15xx/'16xx
- enable/disable interrupts
- emulator stores in a structure
*/
int devamlc (int class, int func, int device) {
#define MAXLINES 128
#define MAXFD MAXLINES+20
#define MAXBOARDS 8
/* AMLC poll rate in milliseconds */
#define AMLCPOLL 75
#if 1
#define QAMLC 020000 /* this is to enable QAMLC/DMQ functionality */
#else
#define QAMLC 0
#endif
/* terminal states needed to process telnet connections */
#define TS_DATA 0 /* data state, looking for IAC */
#define TS_IAC 1 /* have seen initial IAC */
#define TS_SUBOPT 2 /* inside a suboption */
#define TS_OPTION 3 /* inside an option */
static short inited = 0;
static short devices[MAXBOARDS]; /* list of AMLC devices initialized */
static int tsfd; /* socket fd for terminal server */
static struct { /* maps socket fd to device & line */
int device;
int line;
} socktoline[MAXLINES];
static struct {
char dmqmode; /* 0=DMT, 1=DMQ */
char bufnum; /* 0=1st input buffer, 1=2nd */
char eor; /* 1=End of Range on input */
unsigned short dmcchan; /* DMC channel (for input) */
unsigned short baseaddr; /* DMT/Q base address (for output) */
unsigned short intvector; /* interrupt vector */
unsigned short intenable; /* interrupts enabled? */
unsigned short interrupting; /* am I interrupting? */
unsigned short xmitenabled; /* 1 bit per line */
unsigned short recvenabled; /* 1 bit per line */
unsigned short ctinterrupt; /* 1 bit per line */
unsigned short dss; /* 1 bit per line */
unsigned short sockfd[16]; /* Unix socket fd, 1 per line */
unsigned short tstate[16]; /* terminal state (telnet) */
unsigned short room[16]; /* room (chars) left in input buffer */
unsigned short recvlx; /* next line to check for recv data */
} dc[64];
int lx, lcount;
unsigned short utempa;
unsigned int utempl;
ea_t qcbea, dmcea, dmcbufbegea, dmcbufendea;
unsigned short dmcnw;
int dmcpair;
int optval;
int tsflags;
struct sockaddr_in addr;
int fd;
unsigned int addrlen;
unsigned char buf[1024]; /* max size of DMQ buffer */
int i, n, n2, nw, newdevice;
fd_set fds;
struct timeval timeout;
unsigned char ch;
int state;
switch (class) {
case -1:
/* this part of initialization only occurs once, no matter how many
AMLC boards are configured */
if (!inited) {
for (i=0; i<MAXBOARDS; i++)
devices[i] = 0;
if (tport != 0) {
tsfd = socket(AF_INET, SOCK_STREAM, 0);
if (tsfd == -1) {
perror("socket failed for AMLC");
fatal(NULL);
}
optval = 1;
if (setsockopt(tsfd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval))) {
perror("setsockopt failed for AMLC");
fatal(NULL);
}
addr.sin_family = AF_INET;
addr.sin_port = htons(tport);
addr.sin_addr.s_addr = INADDR_ANY;
if(bind(tsfd, (struct sockaddr *)&addr, sizeof(addr))) {
perror("bind: unable to bind for AMLC");
fatal(NULL);
}
if(listen(tsfd, 10)) {
perror("listen failed for AMLC");
fatal(NULL);
}
if ((tsflags = fcntl(tsfd, F_GETFL)) == -1) {
perror("unable to get ts flags for AMLC");
fatal(NULL);
}
tsflags |= O_NONBLOCK;
if (fcntl(tsfd, F_SETFL, tsflags) == -1) {
perror("unable to set ts flags for AMLC");
fatal(NULL);
}
} else
fprintf(stderr, "-tport is zero, can't start AMLC devices\n");
inited = 1;
}
/* this part of initialization occurs for every AMLC board */
if (!inited || tport == 0)
return -1;
/* add this device to the devices array, in the proper slot
so we can tell what order the boards should be in */
switch (device) {
case 054: devices[0] = device; break;
case 053: devices[1] = device; break;
case 052: devices[2] = device; break;
case 035: devices[3] = device; break;
case 015: devices[4] = device; break;
case 016: devices[5] = device; break;
case 017: devices[6] = device; break;
case 032: devices[7] = device; break;
}
return 0;
case 0:
TRACE(T_INST, " OCP '%02o%02o\n", func, device);
//printf(" OCP '%02o%02o\n", func, device);
if (func == 012) { /* set normal (DMT) mode */
dc[device].dmqmode = 0;
} else if (func == 013 && QAMLC) { /* set diagnostic (DMQ) mode */
dc[device].dmqmode = 1;
} else if (func == 015) { /* enable interrupts */
dc[device].intenable = 1;
} else if (func == 016) { /* disable interrupts */
dc[device].intenable = 0;
} else if (func == 017) { /* initialize AMLC */
dc[device].dmqmode = 0;
dc[device].bufnum = 0;
dc[device].dmcchan = 0;
dc[device].baseaddr = 0;
dc[device].intvector = 0;
dc[device].intenable = 0;
dc[device].interrupting = 0;
dc[device].xmitenabled = 0;
dc[device].recvenabled = 0;
dc[device].ctinterrupt = 0;
dc[device].dss = 0; /* NOTE: this is stored inverted: 1=connected */
dc[device].eor = 0;
dc[device].recvlx = 0;
} else {
printf("Unimplemented OCP device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 1:
TRACE(T_INST, " SKS '%02o%02o\n", func, device);
if (func == 04) { /* skip if not interrupting */
if (!dc[device].interrupting)
IOSKIP;
} else {
printf("Unimplemented SKS device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 2:
TRACE(T_INST, " INA '%02o%02o\n", func, device);
if (func == 00) { /* input Data Set Sense (carrier) */
crs[A] = ~dc[device].dss; /* to the outside world, 1 = no carrier*/
IOSKIP;
} else if (func == 07) { /* input AMLC status */
crs[A] = 040000 | (dc[device].bufnum<<8) | (dc[device].intenable<<5) | (dc[device].dmqmode<<4);
if (dc[device].eor) {
crs[A] |= 0100000;
dc[device].eor = 0;
}
if (dc[device].ctinterrupt)
if (dc[device].ctinterrupt & 0xfffe)
crs[A] |= 0xcf; /* multiple char time interrupt */
else
crs[A] |= 0x8f; /* last line cti */
dc[device].interrupting = 0;
//printf("INA '07%02o returns 0x%x\n", device, crs[A]);
IOSKIP;
} else if (func == 011) { /* input ID */
crs[A] = QAMLC | 054;
IOSKIP;
} else {
printf("Unimplemented INA device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 3:
TRACE(T_INST, " OTA '%02o%02o\n", func, device);
if (func == 01) { /* set line configuration */
lx = crs[A] >> 12;
//printf("OTA '01%02o: AMLC line %d config = %x\n", device, lx, crs[A]);
/* if DTR drops on a connected line, disconnect */
if (!(crs[A] & 0x400) && (dc[device].dss & BITMASK16(lx+1))) {
/* see similar code below */
write(dc[device].sockfd[lx], "\r\nDisconnecting logged out session\r\n", 36);
close(dc[device].sockfd[lx]);
dc[device].dss &= ~BITMASK16(lx+1);
//printf("em: closing AMLC line %d on device '%o\n", lx, device);
}
IOSKIP;
} else if (func == 02) { /* set line control */
//printf("OTA '02%02o: AMLC line control = %x\n", device, crs[A]);
lx = (crs[A]>>12);
if (crs[A] & 040) /* character time interrupt enable/disable */
dc[device].ctinterrupt |= BITMASK16(lx+1);
else
dc[device].ctinterrupt &= ~BITMASK16(lx+1);
if (crs[A] & 010) /* transmit enable/disable */
dc[device].xmitenabled |= BITMASK16(lx+1);
else
dc[device].xmitenabled &= ~BITMASK16(lx+1);
if (crs[A] & 01) /* receive enable/disable */
dc[device].recvenabled |= BITMASK16(lx+1);
else
dc[device].recvenabled &= ~BITMASK16(lx+1);
if ((dc[device].ctinterrupt || dc[device].xmitenabled || dc[device].recvenabled) && devpoll[device] == 0)
devpoll[device] = AMLCPOLL*gvp->instpermsec; /* setup another poll */
IOSKIP;
} else if (func == 03) { /* set room in input buffer */
lx = (crs[A]>>12);
dc[device].room[lx] = crs[A] & 0xFFF;
//printf("OTA '03%02o: AMLC line %d, room=%d, A=0x%04x\n", device, lx, dc[device].room[lx], crs[A]);
IOSKIP;
} else if (func == 014) { /* set DMA/C channel (for input) */
dc[device].dmcchan = crs[A] & 0x7ff;
//printf("OTA '14%02o: AMLC chan = %o\n", device, dc[device].dmcchan);
if (!(crs[A] & 0x800))
fatal("Can't run AMLC in DMA mode!");
#if 0
dmcea = dc[device].dmcchan;
dmcpair = get32io(dmcea);
dmcbufbegea = dmcpair>>16;
dmcbufendea = dmcpair & 0xffff;
dmcnw = dmcbufendea - dmcbufbegea + 1;
printf("AMLC: dmcnw=%d\n", dmcnw);
#endif
IOSKIP;
} else if (func == 015) { /* set DMT/DMQ base address (for output) */
dc[device].baseaddr = crs[A];
IOSKIP;
} else if (func == 016) { /* set interrupt vector */
dc[device].intvector = crs[A];
IOSKIP;
} else if (func == 017) { /* set programmable clock constant */
IOSKIP;
} else {
printf("Unimplemented OTA device '%02o function '%02o, A='%o\n", device, func, crs[A]);
fatal(NULL);
}
break;
case 4:
//printf("poll device '%o, cti=%x, xmit=%x, recv=%x, dss=%x\n", device, dc[device].ctinterrupt, dc[device].xmitenabled, dc[device].recvenabled, dc[device].dss);
/* check for 1 new terminal connection on each AMLC poll */
addrlen = sizeof(addr);
while ((fd = accept(tsfd, (struct sockaddr *)&addr, &addrlen)) == -1 && errno == EINTR)
;
if (fd == -1) {
if (errno != EWOULDBLOCK) {
perror("accept error for AMLC");
}
} else {
if (fd >= MAXFD)
fatal("New connection fd is too big");
newdevice = 0;
for (i=0; devices[i] && !newdevice && i<MAXBOARDS; i++)
for (lx=0; lx<16; lx++) {
/* NOTE: don't allow connections on clock line */
if (lx == 15 && (i+1 == MAXBOARDS || !devices[i+1]))
break;
if (!(dc[devices[i]].dss & BITMASK16(lx+1))) {
newdevice = devices[i];
socktoline[fd].device = newdevice;
socktoline[fd].line = lx;
dc[newdevice].dss |= BITMASK16(lx+1);
dc[newdevice].sockfd[lx] = fd;
dc[newdevice].tstate[lx] = TS_DATA;
dc[newdevice].room[lx] = 64;
//printf("em: AMLC connection, fd=%d, device='%o, line=%d\n", fd, newdevice, lx);
break;
}
}
if (!newdevice) {
warn("No free AMLC connection");
write(fd, "\rAll AMLC lines are in use!\r\n", 29);
close(fd);
} else {
if ((tsflags = fcntl(fd, F_GETFL)) == -1) {
perror("unable to get ts flags for AMLC line");
fatal(NULL);
}
tsflags |= O_NONBLOCK;
if (fcntl(fd, F_SETFL, tsflags) == -1) {
perror("unable to set ts flags for AMLC line");
fatal(NULL);
}
/* these Telnet commands put the connecting telnet client
into character-at-a-time mode and binary mode. Since
these probably display garbage for other connection
methods, this stuff might be better off in a very thin
connection server */
buf[0] = 255; /* IAC */
buf[1] = 251; /* will */
buf[2] = 1; /* echo */
buf[3] = 255; /* IAC */
buf[4] = 251; /* will */
buf[5] = 3; /* supress go ahead */
buf[6] = 255; /* IAC */
buf[7] = 253; /* do */
buf[8] = 0; /* binary mode */
write(fd, buf, 9);
strcpy((void *)buf,"\
\r\n\
Welcome to the Prime Computer 50-series emulator, running Primos rev 19.2!\r\n\
\n\
After logging in, use the Prime HELP command for assistance.\r\n\
You are welcome to create a directory under GUEST for your files.\r\n\
To report bugs or contact the author, send email to prirun@gmail.com\r\n\
\n\
Enjoy your time travels! -Jim Wilcoxson aka JIMMY\r\n\
\r\n\
Login please.\r\n\
OK, ");
write(fd, buf, strlen((void *)buf));
}
}
/* do a transmit scan loop for every line. This loop is fairly
efficient because Primos turns off xmitenable on DMQ lines
after a short time w/o any output.
NOTE: it's important to do xmit processing even if a line is
not currently connected, to drain the tty output buffer.
Otherwise, the DMQ buffer fills, this stalls the tty output
buffer, and when the next connection occurs on this line, the
output buffer from the previous terminal session will then be
displayed to the new user. */
if (dc[device].dss || dc[device].xmitenabled) {
for (lx = 0; lx < 16; lx++) {
/* Lots of opportunity to optimize transmits: rather than
using the rtq instruction, do a mapva call to access the
qcb directly, pack the queue data to a buffer, attempt to
write the buffer to the socket, and then update the qcb to
reflect how many bytes were actually written. This would
avoid lots of get16/mapva calls and the write select could
be removed. */
if (dc[device].xmitenabled & BITMASK16(lx+1)) {
n = 0;
if (dc[device].dmqmode) {
qcbea = dc[device].baseaddr + lx*4;
if (dc[device].dss & BITMASK16(lx+1)) {
/* ensure there's some room in the socket buffer */
timeout.tv_sec = 0;
timeout.tv_usec = 0;
FD_ZERO(&fds);
FD_SET(dc[device].sockfd[lx], &fds);
if (select(dc[device].sockfd[lx]+1, NULL, &fds, NULL, &timeout) <= 0)
continue; /* no room at the inn */
/* pack DMQ characters into a buffer & fix parity */
n = 0;
while (n < sizeof(buf) && rtq(qcbea, &utempa, 0)) {
if (utempa & 0x8000) { /* valid character */
//printf("Device %o, line %d, entry=%o (%c)\n", device, lx, utempa, utempa & 0x7f);
buf[n++] = utempa & 0x7F;
}
}
} else { /* no line connected, just drain queue */
//printf("Draining output queue on line %d\n", lx);
put16io(get16io(qcbea), qcbea+1);
}
} else { /* DMT */
utempa = get16io(dc[device].baseaddr + lx);
if (utempa != 0) {
if ((utempa & 0x8000) && (dc[device].dss & BITMASK16(lx+1))) {
//printf("Device %o, line %d, entry=%o (%c)\n", device, lx, utempa, utempa & 0x7f);
buf[n++] = utempa & 0x7F;
}
put16io(0, dc[device].baseaddr + lx);
}
/* would need to setup DMT xmit poll here, and/or look for
char time interrupt. In practice, DMT isn't used when
the AMLC device is configured as a QAMLC */
}
/* NOTE: on a partial write, data sent to the terminal is
lost. The best option would be to find out how much room
is left in the socket buffer and only remove that many
characters from the queue in the loop above.
Mac OSX write selects on sockets will only return true if
there are SO_SNDLOWAT (defaults to 1024) bytes available in
the write buffer. Since the max DMQ buffer size is also
1024, the write below should never fail because of the
write select above. On other OS's, it may be necessary to
limit the number of characters dequeued in the loop above.
*/
if (n > 0)
if ((nw = write(dc[device].sockfd[lx], buf, n)) != n) {
perror("Writing to AMLC");
fprintf(stderr," %d bytes written, but %d bytes sent\n", n, nw);
}
}
}
}
/* process input, but only as much as will fit into the DMC
buffer.
Because the size of the AMLC tumble tables is limited, this
could pose a denial of service issue. Input is processed in a
round to be more fair with this limited resource. Better yet,
the tumble table space could be apportioned for each line with
data waiting to be read.
The AMLC tumble tables should never overflow, because we only
read as many characters from the socket buffers as will fit in
the tumble tables. However, the tty line buffers may overflow,
causing data from the terminal to be dropped. To help avoid
this, a new OTA "set room left" has been implemented. If there
is no room left in the tty input buffer, don't read any more
characters from the socket for that line. In case Primos has
not been modified to use the room left feature, it is
initialized to 64 for each line, so that at most 64 characters
are read from a line during a poll. This also makes overflow
less likely if the line input buffer is set to '200 or so with
AMLBUF. */
if (!dc[device].eor) {
if (dc[device].bufnum)
dmcea = dc[device].dmcchan ^ 2;
else
dmcea = dc[device].dmcchan;
dmcpair = get32io(dmcea);
dmcbufbegea = dmcpair>>16;
dmcbufendea = dmcpair & 0xffff;
dmcnw = dmcbufendea - dmcbufbegea + 1;
lx = dc[device].recvlx;
for (lcount = 0; lcount < 16 && dmcnw > 0; lcount++) {
if ((dc[device].dss & dc[device].recvenabled & BITMASK16(lx+1))
&& dc[device].room[lx] >= 8) {
/* dmcnw is the # of characters left in the dmc buffer, but
there may be further size/space restrictions for this line */
n2 = dmcnw;
if (n2 > sizeof(buf))
n2 = sizeof(buf);
if (n2 > dc[device].room[lx])
n2 = dc[device].room[lx];
if (n2 > 64) /* don't let 1 line hog the resource */
n2 = 64;
while ((n = read(dc[device].sockfd[lx], buf, n2)) == -1 && errno == EINTR)
;
//printf("processing recv on device %o, line %d, b#=%d, n2=%d, n=%d\n", device, lx, dc[device].bufnum, n2, n);
/* zero length read means the socket has been closed */
if (n == 0) {
n = -1;
errno = EPIPE;
}
if (n == -1) {
n = 0;
if (errno == EAGAIN || errno == EWOULDBLOCK)
;
else if (errno == EPIPE || errno == ECONNRESET) {
/* see similar code above */
close(dc[device].sockfd[lx]);
dc[device].dss &= ~BITMASK16(lx+1);
//printf("em: closing AMLC line %d on device '%o\n", lx, device);
} else {
perror("Reading AMLC");
}
}
/* very primitive support here for telnet - only enough to
ignore commands sent by the telnet client. Telnet
commands could be split across reads and AMLC interrupts,
so a small state machine is used for each line */
if (n > 0) {
state = dc[device].tstate[lx];
for (i=0; i<n; i++) {
ch = buf[i];
switch (state) {
case TS_DATA:
if (ch == 255)
state = TS_IAC;
else {
storech:
utempa = lx<<12 | 0x0200 | ch;
put16io(utempa, dmcbufbegea);
//printf("******* stored character %o (%c) at %o\n", utempa, utempa&0x7f, dmcbufbegea);
dmcbufbegea = INCVA(dmcbufbegea, 1);
dmcnw--;
}
break;
case TS_IAC:
switch (ch) {
case 255:
state = TS_DATA;
goto storech;
case 251: /* will */
case 252: /* won't */
case 253: /* do */
case 254: /* don't */
state = TS_OPTION;
break;
case 250: /* begin suboption */
state = TS_SUBOPT;
break;
default: /* ignore other chars after IAC */
state = TS_DATA;
}
break;
case TS_SUBOPT:
if (ch == 255)
state = TS_IAC;
break;
case TS_OPTION:
default:
state = TS_DATA;
}
}
dc[device].tstate[lx] = state;
}
}
lx = (lx+1) & 0xF;
}
dc[device].recvlx = lx;
if (dmcbufbegea-1 > dmcbufendea)
fatal("AMLC tumble table overflowed?");
put16io(dmcbufbegea, dmcea);
if (dmcbufbegea > dmcbufendea) { /* end of range has occurred */
dc[device].bufnum = 1-dc[device].bufnum;
dc[device].eor = 1;
}
}
/* time to interrupt? */
if (dc[device].intenable && (dc[device].ctinterrupt || dc[device].eor)) {
if (gvp->intvec == -1) {
gvp->intvec = dc[device].intvector;
dc[device].interrupting = 1;
} else
devpoll[device] = 100; /* come back soon! */
}
/* conditions to setup another poll:
- any board with ctinterrupt set on any line is polled
- any board with xmitenabled on any line is polled (to drain output)
- any board with recvenabled on a connected line is polled
- the device must not already be set for a poll
NOTE: there is always at least one board with ctinterrupt set
(the last board), so it will always be polling and checking
for new incoming connections */
if ((dc[device].ctinterrupt || dc[device].xmitenabled || (dc[device].recvenabled & dc[device].dss)) && devpoll[device] == 0)
devpoll[device] = AMLCPOLL*gvp->instpermsec; /* setup another poll */
break;
}
}
/* PNC (ring net) device handler
On a real Prime ring network, each node has a unique node id from 1
to 254. The node id is configured with software and stored into the
PNC during network initialization. In practice, CONFIG_NET limits
the node id to 247. When a node starts, it sends a message to
itself. If any system acknowledges this packet, it means the node
id is already in use. If this occcurs, the new node will disconnect
from the ring. Since all systems in a ring have to be physically
cabled together, there was usually a common network administration
to ensure that no two nodes had the same node id.
Node id 255 is the broadcast id - all nodes receive these messages.
Beginning with 19.3, An "I'm alive" broadcast message is sent every
10 seconds to let all nodes know that a machine is still up.
For use with the emulator, the unique node id concept doesn't make a
lot of sense. If a couple of guys running the emulator wanted to
have a 2-node network with nodes 1 and 2 (network A), and another
couple of guys had a 2-node network with nodes 1 and 2 (network B),
then it wouldn't be possible for a node in one network to add a node
in the other network without other people redoing their node ids to
ensure uniqueness. To get around this, the emulator has a config
file RING.CFG that lets you say "Here are the guys in *my* ring
(with all unique node ids), here is each one's IP address and port,
my node id on their ring is *blah*, their node id on their ring is
*blah2*"". This allows the node id to be a per-host number that
only needs to be coordinated with two people that want to talk to
each other, and effectively allows one emulator to be in multiple
rings simulataneously. Cool, eh?
PNC ring buffers are 256 words, with later versions of Primos also
supporting 512, and 1024 word packets. "nbkini" (rev 18) allocates
12 ring buffers + 1 for every 2 nodes in the ring. Both the 1-to-2
queue for received packets, and 2-to-1 queue for xmit packets have
63 entries. PNC ring buffers are wired and never cross page
boundaries.
The actual xmit/recv buffers for PNC are 256-1024 words, and each
buffer has an associated "block header", stored in a different
location in system memory, that is 8 words.
The BH fields are (16-bit words):
0: type field (1)
1: free pool id (3 for ring buffers)
2-3: pointer to data block
4-7 are available for use by the drivers. For PNC:
4: number of words received (calculated by pncdim based on DMA regs)
5: receive status word
6: data 1
7: data 2
The PNC data buffer has a 2-word header, followed by the data:
0: To (left) and From (right) bytes containing node-ids
1: "Type" word.
Bit 1 set = odd number of bytes (if set, last word is only 1 byte)
Bit 7 set = normal data messages (otherwise, a timer message)
Bit 16 set = broadcast timer message
PNC data buffers never cross page boundaries.
Primos PNC usage:
OCP '0007
- disconnect from ring
OCP '0207
- inject a token into the ring
OCP '0507
- set PNC into "delay" mode (token recovery BS)
OCP '1007
- stop any xmit in progress
INA '1707
- read PNC status word
- does this in a loop until "connected" bit is clear after disconnect above
- PNC status word:
bit 1 set if receive interrupt (rcv complete)
bit 2 set if xmit interrupt (xmit complete)
bit 3 set if "PNC booster" (repeater?)
bit 4-5 not used
bit 6 set if connected to ring
bit 7 set if multiple tokens detected (only after xmit EOR)
bit 8 set if token detected (only after xmit EOR)
bits 9-16 controller node ID
INA '1207
- read receive status word (byte?)
bit 1 set for previous ACK
bit 2 set for multiple previous ACK
bit 3 set for previous WACK
bit 4 set for previous NACK
bits 5-6 unused
bit 7 ACK byte parity error
bit 8 ACK byte check error (parity on bits 1-6)
bit 9 recv buffer parity error
bit 10 recv busy
bit 11 end of range before end of message (received msg was too big
for the receive buffer)
bits 12-16 unused
INA '1307
- read xmit status word
bit 1 set for ACK
bit 2 set for multiple ACK (more than 1 node accepted packet)
bit 3 set for WACK
bit 4 set for NACK (bad CRC)
bit 5 unused
bit 6 parity bit of ACK (PNC only)
bit 7 ACK byte parity error
bit 8 ACK byte check error (parity on bits 1-6)
bit 9 xmit buffer parity error
bit 10 xmit busy
bit 11 packet did not return
bit 12 packet returned with bits 6-8 nonzero
bits 13-16 retry count (booster only, zero on PNC)
OCP '1707
- initialize
OTA '1707
- set my node ID (in A register)
- if this fails, no PNC present
OTA '1607
- set interrupt vector (in A reg)
OTA '1407
- initiate receive, dma channel in A
OTA '1507
- initiate xmit, dma channel in A
OCP '0107
- connect to the ring
- (Primos follows this with INA '1707 until "connected" bit is set)
OCP '1407
- ack receive (clears recv interrupt request)
OCP '0407
- ack xmit (clears xmit interrupt request)
OCP '1507
- set interrupt mask (enable interrupts)
OCP '1107
- rev 20 does this, not sure what it does
*/
int devpnc (int class, int func, int device) {
#if 0
#define PNCPOLL 100
/* PNC controller status bits */
#define PNCRCVINT 0x8000 /* bit 1 rcv interrupt (rcv complete) */
#define PNCXMITINT 0x4000 /* bit 2 xmit interrupt (xmit complete) */
#define PNCBOOSTER 0x2000 /* bit 3 PNC booster = 1 */
#define PNCCONNECTED 0x400 /* bit 6 */
#define PNCTWOTOKENS 0x200 /* bit 7, only set after xmit EOR */
#define PNCTOKDETECT 0x100 /* bit 8, only set after xmit EOR */
/* xmit/recv states */
#define XR_IDLE 0 /* initial state: no xmit or recv */
#define XR_READY 1 /* ready to recv or xmit */
#define XR_XFER 3 /* transferring data over socket */
#define MINCONNTIME 30 /* wait 30 seconds between connect attempts */
#define MAXPKTBYTES 2048 /* max of 2048 byte packets */
static short configured = 0; /* true if PNC configured */
static unsigned short pncstat; /* controller status word */
static unsigned short recvstat; /* receive status word */
static unsigned short xmitstat; /* xmit status word */
static unsigned short pncvec; /* PNC interrupt vector */
static unsigned short myid; /* my PNC node id */
static unsigned short enabled; /* interrupts enabled flag */
static int pncfd; /* socket fd for all PNC network connections */
/* the ni structure contains the important information for each node
in the network and is indexed by the local node id */
static struct { /* node info for each node in my network */
short cfg; /* true if seen in ring.cfg */
short fd; /* socket fd for this node, -1 if unconnected */
char ip[16]; /* IP address of the remote node */
short port; /* emulator network port on the remote node */
short myremid; /* my node ID on the remote node's ring network */
short yourremid; /* remote node's id on its own network */
time_t conntime; /* time of last connect request */
} ni[256];
/* array to map socket fd's to local node id's for accessing the ni
structure. Not great programming, because the host OS could
choose to use large fd's, which will cause a runtime error */
#define FDMAPSIZE 1024
static short fdnimap[FDMAPSIZE];
typedef struct {
short state, offset;
unsigned short dmachan, dmareg, dmaaddr;
short dmanw, dmabytesleft, toid, fromid, remtoid, remfromid;
unsigned char iobuf[MAXPKTBYTES+2];
} t_dma;
static t_dma recv, xmit;
short i;
unsigned short access, dmaword;
unsigned short *iobufp;
time_t timenow;
struct hostent* server;
struct sockaddr_in addr;
int fd, optval, fdflags;
unsigned int addrlen;
FILE *ringfile;
char *tok, buf[128], *p;
int n, linenum;
int tempid, tempmyremid, tempyourremid, tempport, cfgerrs;
char tempip[22]; /* xxx.xxx.xxx.xxx:ppppp */
#define DELIM " \t\n"
#define PDELIM ":"
//gvp->traceflags = ~TB_MAP;
if (nport <= 0) {
if (class == -1)
fprintf(stderr, "-nport is zero, PNC not started\n");
else
TRACE(T_INST|T_RIO, "nport <= 0, PIO to PNC ignored, class=%d, func='%02o, device=%02o\n", class, func, device);
return -1;
}
switch (class) {
case -1:
for (i=0; i<FDMAPSIZE; i++)
fdnimap[i] = -1;
for (i=0; i<256; i++) {
ni[i].cfg = 0;
ni[i].fd = -1;
strcpy(ni[i].ip, " ");
ni[i].port = 0;
ni[i].myremid = 0;
ni[i].yourremid = 0;
}
xmit.state = XR_IDLE;
recv.state = XR_IDLE;
myid = 0; /* set an invalid node id */
/* read the ring.cfg config file. Each line contains:
localid ip:port [myremoteid yourremoteid]
where:
localid = the remote node's id (1-247) on my ring
ip = the remote emulator's TCP/IP address (or later, name)
port = the remote emulator's TCP/IP PNC port
myremoteid = my node's id (1-247) on the remote ring
yourremoteid = the remote node's id on its own ring
The two remote id fields are optional, and allow the emulator
to be in multiple rings with different administration. If
these are not specified, myremoteid = my local id, and
yourremoteid = localid (the remote host's local id).
There cannot be duplicates among the localid field, but there
can be duplicates in the remoteid fields */
linenum = 0;
if ((ringfile=fopen("ring.cfg", "r")) != NULL) {
while (fgets(buf, sizeof(buf), ringfile) != NULL) {
linenum++;
if (strcmp(buf,"") == 0 || buf[0] == ';')
continue;
if ((p=strtok(buf, DELIM)) == NULL) {
fprintf(stderr,"Line %d of ring.cfg: node id missing\n", linenum);
continue;
}
tempid = atoi(p);
if (tempid < 1 || tempid > 247) {
fprintf(stderr,"Line %d of ring.cfg: node id is out of range 1-247\n", linenum);
continue;
}
if (ni[tempid].cfg) {
fprintf(stderr,"Line %d of ring.cfg: node id occurs twice\n", linenum);
continue;
}
if ((p=strtok(NULL, DELIM)) == NULL) {
fprintf(stderr,"Line %d of ring.cfg: IP address missing\n", linenum);
continue;
}
if (strlen(p) > 21) {
fprintf(stderr,"Line %d of ring.cfg: IP address is too long\n", linenum);
continue;
}
strcpy(tempip, p);
if ((p=strtok(NULL, DELIM)) != NULL) {
tempmyremid = atoi(p);
if (tempmyremid < 1 || tempmyremid > 247) {
fprintf(stderr,"Line %d of ring.cfg: my remote node id out of range 1-247\n", linenum);
continue;
}
} else
tempmyremid = -1;
if ((p=strtok(NULL, DELIM)) != NULL) {
tempyourremid = atoi(p);
if (tempyourremid < 1 || tempyourremid > 247) {
fprintf(stderr,"Line %d of ring.cfg: your remote node id out of range 1-247\n", linenum);
continue;
}
} else
tempyourremid = tempid;
if (tempyourremid == tempmyremid) {
fprintf(stderr,"Line %d of ring.cfg: my remote node id and your remote node id can't be equal\n", linenum);
continue;
}
/* parse the port number from the IP address */
tempport = -1;
if ((p=strtok(tempip, PDELIM)) != NULL) {
strcpy(ni[tempid].ip, p);
if ((p=strtok(NULL, PDELIM)) != NULL) {
tempport = atoi(p);
if (tempport < 1 || tempport > 32000)
fprintf(stderr,"Line %d of ring.cfg: port number is out of range 1-32000\n", linenum);
}
}
if (tempport == -1) {
fprintf(stderr, "Line %d of ring.cfg: IP should be xxx.xxx.xxx.xxx:pppp\n", linenum);
continue;
}
ni[tempid].cfg = 1;
ni[tempid].myremid = tempmyremid;
ni[tempid].yourremid = tempyourremid;
ni[tempid].port = tempport;
TRACE(T_RIO, "Line %d: id=%d, ip=\"%s\", port=%d, myremid=%d, yourremid=%d\n", linenum, tempid, tempip, tempport, tempmyremid, tempyourremid);
configured = 1;
}
if (!feof(ringfile)) {
perror(" error reading ring.cfg");
fatal(NULL);
}
fclose(ringfile);
}
if (!configured) {
fprintf(stderr, "PNC not configured because ring.cfg missing or errors occurred.\n");
return -1;
}
return 0;
case 0:
/* OCP '0700 - disconnect */
if (func == 00) {
TRACE(T_INST|T_RIO, " OCP '%02o%02o - disconnect\n", func, device);
if (pncfd >= 0) {
close(pncfd);
pncfd = -1;
}
for (i=0; i<256; i++) {
if (ni[i].fd >= 0) {
fdnimap[ni[i].fd] = -1;
close(ni[i].fd);
ni[i].fd = -1;
}
}
xmit.state = XR_IDLE;
recv.state = XR_IDLE;
pncstat &= ~PNCCONNECTED;
/* OCP '0701 - connect
If any errors occur while trying to setup the listening socket,
it seems reasonable to leave the PNC unconnected and continue,
but this will cause Primos (rev 19) to hang in a spin loop. So
for now, bomb. Later, we could put the PNC in a disabled state,
where INA/OTA don't skip, since Primos handles this better.
*/
} else if (func == 01) { /* connect to the ring */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - connect\n", func, device);
/* start listening on the network port */
pncfd = socket(AF_INET, SOCK_STREAM, 0);
if (pncfd == -1) {
perror("socket failed for PNC");
fatal(NULL);
}
if (fcntl(pncfd, F_GETFL, fdflags) == -1) {
perror("unable to get ts flags for PNC");
fatal(NULL);
}
fdflags |= O_NONBLOCK;
if (fcntl(pncfd, F_SETFL, fdflags) == -1) {
perror("unable to set ts flags for PNC");
fatal(NULL);
}
optval = 1;
if (setsockopt(pncfd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval))) {
perror("setsockopt failed for PNC");
fatal(NULL);
}
addr.sin_family = AF_INET;
addr.sin_port = htons(nport);
addr.sin_addr.s_addr = INADDR_ANY;
if(bind(pncfd, (struct sockaddr *)&addr, sizeof(addr))) {
perror("bind: unable to bind for PNC");
fatal(NULL);
}
if(listen(pncfd, 10)) {
perror("listen failed for PNC");
fatal(NULL);
}
pncstat |= PNCCONNECTED;
} else if (func == 02) { /* inject a token */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - inject token\n", func, device);
} else if (func == 04) { /* ack xmit (clear xmit int) */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - ack xmit int\n", func, device);
pncstat &= ~PNCXMITINT; /* clear "xmit interrupting" */
pncstat &= ~PNCTOKDETECT; /* clear "token detected" */
xmitstat = 0;
xmit.state = XR_IDLE;
} else if (func == 05) { /* set PNC into "delay" mode */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - set delay mode\n", func, device);
} else if (func == 010) { /* stop xmit in progress */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - stop xmit\n", func, device);
xmitstat = 0;
xmit.state = XR_IDLE;
} else if (func == 011) { /* dunno what this is - rev 20 startup */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - unknown\n", func, device);
;
} else if (func == 012) { /* set normal mode */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - set normal mode\n", func, device);
;
} else if (func == 013) { /* set diagnostic mode */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - set diag mode\n", func, device);
;
} else if (func == 014) { /* ack receive (clear rcv int) */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - ack recv int\n", func, device);
pncstat &= ~PNCRCVINT;
recvstat = 0;
recv.active = 0;
} else if (func == 015) { /* set interrupt mask (enable int) */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - enable interrupts\n", func, device);
enabled = 1;
} else if (func == 016) { /* clear interrupt mask (disable int) */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - disable interrupts\n", func, device);
enabled = 0;
} else if (func == 017) { /* initialize */
TRACE(T_INST|T_RIO, " OCP '%02o%02o - initialize\n", func, device);
pncstat = 0;
recvstat = 0;
xmitstat = 0;
pncvec = 0;
enabled = 0;
xmit.state = XR_IDLE;
recv.state = XR_IDLE;
} else {
printf("Unimplemented OCP device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 1:
TRACE(T_INST|T_RIO, " SKS '%02o%02o\n", func, device);
if (func == 99)
IOSKIP; /* assume it's always ready */
else {
printf("Unimplemented SKS device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 2:
if (func == 011) { /* input ID */
TRACE(T_INST|T_RIO, " INA '%02o%02o - input ID\n", func, device);
crs[A] = 07;
IOSKIP;
} else if (func == 012) { /* read receive status word */
TRACE(T_INST|T_RIO, " INA '%02o%02o - get recv status '%o\n", func, device, recvstat);
crs[A] = recvstat;
IOSKIP;
} else if (func == 013) { /* DIAG - read static register; not impl. */
crs[A] = 0;
IOSKIP;
} else if (func == 014) { /* read xmit status word */
TRACE(T_INST|T_RIO, " INA '%02o%02o - get xmit status '%o\n", func, device, xmitstat);
crs[A] = xmitstat;
IOSKIP;
} else if (func == 017) { /* read controller status word */
TRACE(T_INST|T_RIO, " INA '%02o%02o - get ctrl status '%o\n", func, device, pncstat);
crs[A] = pncstat;
IOSKIP;
} else {
printf("Unimplemented INA device '%02o function '%02o\n", device, func);
fatal(NULL);
}
break;
case 3:
TRACE(T_INST|T_RIO, " OTA '%02o%02o\n", func, device);
if (func == 011) { /* DIAG - single step; not impl.*/
IOSKIP;
} else if (func == 014) { /* initiate recv, dma chan in A */
recvstat = 0x0040; /* set receive busy */
recv.dmachan = crs[A];
recv.dmareg = recv.dmachan << 1;
recv.dmanw = regs.sym.regdmx[recv.dmareg];
if (recv.dmanw <= 0)
recv.dmanw = -(recv.dmanw>>4);
else
recv.dmanw = -((recv.dmanw>>4) ^ 0xF000);
recv.dmaaddr = regs.sym.regdmx[recv.dmareg+1];
recv.iobufp = mem + mapio(recv.dmaaddr);
recv.state = XR_READY;
recv.offset = -1; /* initialize for new packet */
TRACE(T_INST|T_RIO, " recv: dmachan=%o, dmareg=%o, dmaaddr=%o, dmanw=%d\n", recv.dmachan, recv.dmareg, recv.dmaaddr, recv.dmanw);
devpoll[device] = 10;
IOSKIP;
} else if (func == 015) { /* initiate xmit, dma chan in A */
if (xmitstat & 0x0040) { /* already busy? */
warn("pnc: xmit when already busy!");
return; /* yes, return and don't skip */
}
xmitstat = 0x0040; /* set xmit busy */
xmit.dmachan = crs[A];
xmit.dmareg = xmit.dmachan<<1;
xmit.dmanw = regs.sym.regdmx[xmit.dmareg];
if (xmit.dmanw <= 0)
xmit.dmanw = -(xmit.dmanw>>4);
else
xmit.dmanw = -((xmit.dmanw>>4) ^ 0xF000);
xmit.dmaaddr = regs.sym.regdmx[xmit.dmareg+1];
TRACE(T_INST|T_RIO, " xmit: dmachan=%o, dmareg=%o, dmaaddr=%o, dmanw=%d\n", xmit.dmachan, xmit.dmareg, xmit.dmaaddr, xmit.dmanw);
/* read the first word, the to and from node id's, and map them
to the remote hosts' expected to and from node id's */
xmit.iobufp = mem + mapva(xmit.dmaaddr, 0, RACC, &access);
dmaword = *xmit.iobufp++;
xmit.toid = dmaword >> 8;
xmit.fromid = dmaword & 0xFF;
TRACE(T_INST|T_RIO, " xmit: toid=%d, fromid=%d\n", xmit.toid, xmit.fromid);
/* broadcast packets are "I am up" msgs and are simply discarded
here, with a succesful transmit status. Node up/down is
handled in the devpnc poll code.
XXX: should check that this really is the "I am up" msg */
if (xmit.toid == 255) {
goto xmitdone1;
}
/* if this xmit is to me and there is a new receive pending and
there is room left in the receive buffer, put the packet
directly in my receive buffer. If we can't receive it now,
set NACK xmit and receive status. If the packet is not to
me, copy it to the xmit.iobuf and add the header */
if (xmit.toid == myid) {
if (recv.state == XR_READY && recv.dmanw >= xmit.dmanw) {
memcpy(recv.iobufp, xmit.iobufp, xmit.dmanw*2);
regs.sym.regdmx[recv.dmareg] += xmit.dmanw; /* bump recv count */
regs.sym.regdmx[recv.dmareg+1] += xmit.dmanw; /* and address */
pncstat |= 0x8000; /* set recv interrupt too */
recv.state = XR_IDLE; /* no longer ready to recv */
xmitdone1:
regs.sym.regdmx[xmit.dmareg] += xmit.dmanw; /* and xmit count */
regs.sym.regdmx[xmit.dmareg+1] += xmit.dmanw; /* and address */
pncstat |= 0x4100; /* set xmit interrupt + token */
xmitstat |= 0x8000; /* set ACK xmit status */
goto xmitdone;
} else {
xmitstat |= 0x1000; /* set xmit NACK status */
recvstat |= 0x20; /* set recv premature EOR */
}
}
/* check for unreasonable situations */
if (xmit.toid == 0)
fatal("PNC: xmit.toid is zero");
if (xmit.fromid == 0)
fatal("PNC: xmit.fromid is zero");
if (xmit.fromid != myid) {
printf("PNC: xmit fromid=0x%02x != myid=0x%02x\n", xmit.fromid, myid);
fatal(NULL);
}
/* map local to and from node id to remote to and from node id */
if (ni[xmit.fromid].myremid > 0)
xmit.remfromid = ni[xmit.fromid].myremid;
else
xmit.remfromid = myid;
xmit.remtoid = ni[xmit.toid].yourremid;
xmit.state = XR_READY; /* xmit pending */
xmit.offset = -1; /* initialize for new xmit */
devpoll[device] = 10;
xmitdone:
if (enabled && (pncstat & 0xC000))
if (gvp->intvec == -1)
gvp->intvec = pncvec;
else
devpoll[device] = 100;
IOSKIP;
} else if (func == 016) { /* set interrupt vector */
pncvec = crs[A];
TRACE(T_INST|T_RIO, " interrupt vector = '%o\n", pncvec);
IOSKIP;
} else if (func == 017) { /* set my node ID */
myid = crs[A] & 0xFF;
pncstat = (pncstat & 0xFF00) | myid;
TRACE(T_INST|T_RIO, " my node id is %d\n", myid);
if (ni[myid].cfg)
fprintf(stderr, "Warning: my node id of %d is in ring.cfg\n", myid);
strcpy(ni[myid].ip, "127.0.0.1");
ni[myid].port = nport;
ni[myid].myremid = myid;
ni[myid].yourremid = myid;
IOSKIP;
} else {
printf("Unimplemented OTA device '%02o function '%02o, A='%o\n", device, func, crs[A]);
fatal(NULL);
}
break;
case 4:
TRACE(T_INST|T_RIO, " POLL '%02o%02o\n", func, device);
/* if a transmit is pending, start/continue it until completes */
if (xmit.state > XR_IDLE) {
if (ni[xmit.toid].fd == -1) { /* not connected yet */
if (time(&timenow) - ni[xmit.toid].conntime < MINCONNTIME) {
printf("em: waiting for connection timeout to node %d\n", xmit.toid);
goto xmiterr;
}
if ((ni[xmit.toid].fd = socket(AF_INET, SOCK_STREAM, 0)) == -1) {
perror ("Unable to create socket");
exit(1);
}
server = gethostbyname(ni[xmit.toid].ip);
if (server == NULL) {
fprintf(stderr,"pnc: cannot resolve %s\n", ni[xmit.toid].ip);
close(ni[xmit.toid].fd);
ni[xmit.toid].fd = -1;
goto xmiterr;
}
ni[xmit.toid].conntime = timenow;
bzero((char *) &addr, sizeof(addr));
addr.sin_family = AF_INET;
bcopy((char *)server->h_addr, (char *)&addr.sin_addr.s_addr, server->h_length);
addr.sin_port = htons(ni[xmit.toid].port);
if (connect(ni[xmit.toid].fd, (void *) &addr,(socklen_t) sizeof(addr)) < 0) {
perror("pnc: error connecting to server\n");
close(ni[xmit.toid].fd);
ni[xmit.toid].fd = -1;
goto xmiterr;
}
xmit.state = XR_XFER;
}
/* start/continue the transfer */
if (xmit.state == XR_XFER) {
if ((n=write(ni[xmit.toid].fd, xmit.iobuf[offset], xmit.dmabytes-xmit.offset)) < 0) {
perror("pnc: write error");
} else {
xmit.offset += n;
xmit.dmabytesleft -= n;
if (xmit.dmabytesleft == 0)
xmit.state = XR_IDLE;
}
}
#if 0
while ((fd = accept(pncfd, (struct sockaddr *)&addr, &addrlen)) == -1 && errno == EINTR)
;
if (fd == -1) {
if (errno != EWOULDBLOCK) {
perror("accept error for PNC");
}
} else {
if (fd >= MAXFD)
fatal("New connection fd is too big");
printf("New PNC connection:\n");
/*
- new connect request came in
- scan host table to find matching IP
- how to figure out when one IP has multiple emulators? port?
- if already connected, display warning error and ignore
newdevice = 0;
for (i=0; devices[i] && !newdevice && i<MAXBOARDS; i++)
for (lx=0; lx<16; lx++)
if (!(dc[devices[i]].dss & BITMASK16(lx+1))) {
newdevice = devices[i];
socktoline[fd].device = newdevice;
socktoline[fd].line = lx;
dc[newdevice].dss |= BITMASK16(lx+1);
dc[newdevice].sockfd[lx] = fd;
//printf("em: AMLC connection, fd=%d, device='%o, line=%d\n", fd, newdevice, lx);
break;
}
if (!newdevice) {
warn("No free AMLC connection");
write(fd, "\rAll AMLC lines are in use!\r\n", 29);
close(fd);
}
xmitdone:
if (xmitstat == 0x0040) { /* complete w/o errors? */
pncstat |= 0x4100; /* set xmit interrupt + token */
xmitstat |= 0x8000; /* yes, set ACK xmit status */
}
#endif
devpoll[device] = PNCPOLL*gvp->instpermsec;
break;
default:
fatal("Bad func in devpcn");
#else
return -1;
#endif
}
Reference in New Issue View Git Blame Copy Permalink