mirror of
https://github.com/rcornwell/sims.git
synced 2026-04-26 03:58:50 +00:00
SEL32: Fix ADFD, SUFD, MPFD, DVFD instructions display. SEL32: Change console output to handle 8 bit parity for UTX. SEL32: Correct RPSWT instruction for V9 processor. SEL32: Reverse scan order of channel complete and interrupts. SEL32: Move memory and map register r/w macros to sel32_defs.h.
1146 lines
56 KiB
C
1146 lines
56 KiB
C
/* sel32_scfi.c: SEL-32 SCFI SCSI Disk controller
|
|
|
|
Copyright (c) 2018-2019, James C. Bevier
|
|
Portions provided by Richard Cornwell and other SIMH contributers
|
|
|
|
Permission is hereby granted, free of charge, to any person obtaining a
|
|
copy of this software and associated documentation files (the "Software"),
|
|
to deal in the Software without restriction, including without limitation
|
|
the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
and/or sell copies of the Software, and to permit persons to whom the
|
|
Software is furnished to do so, subject to the following conditions:
|
|
|
|
The above copyright notice and this permission notice shall be included in
|
|
all copies or substantial portions of the Software.
|
|
|
|
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
JAMES C. BEVIER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
|
|
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include "sel32_defs.h"
|
|
|
|
extern t_stat set_dev_addr(UNIT *uptr, int32 val, CONST char *cptr, void *desc);
|
|
extern t_stat show_dev_addr(FILE * st, UNIT *uptr, int32 v, CONST void *desc);
|
|
extern void chan_end(uint16 chan, uint8 flags);
|
|
extern int chan_read_byte(uint16 chsa, uint8 *data);
|
|
extern int chan_write_byte(uint16 chsa, uint8 *data);
|
|
extern void set_devattn(uint16 addr, uint8 flags);
|
|
extern t_stat chan_boot(uint16 addr, DEVICE *dptr);
|
|
extern int test_write_byte_end(uint16 chsa);
|
|
|
|
extern uint32 M[]; /* our memory */
|
|
extern uint32 SPAD[]; /* cpu SPAD memory */
|
|
|
|
#ifdef NUM_DEVS_SCFI
|
|
#define UNIT_V_TYPE (UNIT_V_UF + 0)
|
|
#define UNIT_TYPE (0xf << UNIT_V_TYPE)
|
|
|
|
#define GET_TYPE(x) ((UNIT_TYPE & (x)) >> UNIT_V_TYPE)
|
|
#define SET_TYPE(x) (UNIT_TYPE & ((x) << UNIT_V_TYPE))
|
|
#define UNIT_SCFI UNIT_ATTABLE | UNIT_IDLE
|
|
|
|
/* INCH command information */
|
|
/*
|
|
WD 0 - Data address
|
|
WD 1 - Flags - 0 -36 byte count
|
|
|
|
Data - 224 word INCH buffer address
|
|
WD 1 Drive 0 Attribute register
|
|
WD 2 Drive 1 Attribute register
|
|
WD 3 Drive 2 Attribute register
|
|
WD 4 Drive 3 Attribute register
|
|
WD 5 Drive 4 Attribute register
|
|
WD 6 Drive 5 Attribute register
|
|
WD 7 Drive 6 Attribute register
|
|
WD 8 Drive 7 Attribute register
|
|
|
|
Memory attribute register layout
|
|
bits 0-7 - Flags
|
|
bits 0&1 - 00=Reserved, 01=MHD, 10=FHD, 11=MHD with FHD option
|
|
bit 2 - 1=Cartridge module drive
|
|
bit 3 - 0=Reserved
|
|
bit 4 - 1=Drive not present
|
|
bit 5 - 1=Dual Port
|
|
bit 6 - 0=Reserved
|
|
bit 7 - 0=Reserved
|
|
bits 8-15 - sector count (sectors per track)(F16=16, F20=20)
|
|
bits 16-23 - MHD Head count (number of heads on MHD)
|
|
bits 24-31 - FHD head count (number of heads on FHD or number head on FHD option of mini-module)
|
|
*/
|
|
|
|
|
|
/* 224 word INCH Buffer layout */
|
|
/* 128 word subchannel status storage (SST) */
|
|
/* 66 words of program status queue (PSQ) */
|
|
/* 26 words of scratchpad */
|
|
/* 4 words of label buffer registers */
|
|
|
|
#define CMD u3
|
|
/* u3 */
|
|
/* in u3 is device command code and status */
|
|
#define DSK_CMDMSK 0x00ff /* Command being run */
|
|
#define DSK_STAR 0x0100 /* STAR value in u4 */
|
|
#define DSK_NU2 0x0200 /* */
|
|
#define DSK_READDONE 0x0400 /* Read finished, end channel */
|
|
#define DSK_ENDDSK 0x0800 /* Sensed end of disk */
|
|
#define DSK_SEEKING 0x1000 /* Disk is currently seeking */
|
|
#define DSK_READING 0x2000 /* Disk is reading data */
|
|
#define DSK_WRITING 0x4000 /* Disk is writing data */
|
|
#define DSK_BUSY 0x8000 /* Flag to send a CUE */
|
|
/* commands */
|
|
#define DSK_INCH 0x00 /* Initialize channel */
|
|
#define DSK_INCH2 0xf0 /* Initialize channel for processing */
|
|
#define DSK_WD 0x01 /* Write data */
|
|
#define DSK_RD 0x02 /* Read data */
|
|
#define DSK_NOP 0x03 /* No operation */
|
|
#define DSK_SNS 0x04 /* Sense */
|
|
#define DSK_SCK 0x07 /* Seek cylinder, track, sector */
|
|
#define DSK_TIC 0x08 /* Transfer in channel */
|
|
#define DSK_FNSK 0x0B /* Format for no skip */
|
|
#define DSK_LPL 0x13 /* Lock protected label */
|
|
#define DSK_LMR 0x1F /* Load mode register */
|
|
#define DSK_RES 0x23 /* Reserve */
|
|
#define DSK_WSL 0x31 /* Write sector label */
|
|
#define DSK_RSL 0x32 /* Read sector label */
|
|
#define DSK_REL 0x33 /* Release */
|
|
#define DSK_XEZ 0x37 /* Rezero */
|
|
#define DSK_POR 0x43 /* Priority Override */
|
|
#define DSK_IHA 0x47 /* Increment head address */
|
|
#define DSK_SRM 0x4F /* Set reserve track mode */
|
|
#define DSK_WTL 0x51 /* Write track label */
|
|
#define DSK_RTL 0x52 /* Read track label */
|
|
#define DSK_XRM 0x5F /* Reset reserve track mode */
|
|
#define DSK_RAP 0xA2 /* Read angular positions */
|
|
#define DSK_TESS 0xAB /* Test STAR (subchannel target address register) */
|
|
#define DSK_ICH 0xFF /* Initialize Controller */
|
|
|
|
#define STAR u4
|
|
/* u4 - sector target address register (STAR) */
|
|
/* Holds the current cylinder, head(track), sector */
|
|
#define DISK_CYL 0xFFFF0000 /* cylinder mask */
|
|
#define DISK_TRACK 0x0000FF00 /* track mask */
|
|
#define DISK_SECTOR 0x000000ff /* sector mask */
|
|
|
|
#define SNS u5
|
|
/* u5 */
|
|
/* Sense byte 0 - mode register */
|
|
#define SNS_DROFF 0x80000000 /* Drive Carriage will be offset */
|
|
#define SNS_TRKOFF 0x40000000 /* Track offset: 0=positive, 1=negative */
|
|
#define SNS_RDTMOFF 0x20000000 /* Read timing offset = 1 */
|
|
#define SNS_RDSTRBT 0x10000000 /* Read strobe timing: 1=positive, 0=negative */
|
|
#define SNS_DIAGMOD 0x08000000 /* Diagnostic Mode ECC Code generation and checking */
|
|
#define SNS_RSVTRK 0x04000000 /* Reserve Track mode: 1=OK to write, 0=read only */
|
|
#define SNS_FHDOPT 0x02000000 /* FHD or FHD option = 1 */
|
|
#define SNS_RESERV 0x01000000 /* Reserved */
|
|
|
|
/* Sense byte 1 */
|
|
#define SNS_CMDREJ 0x800000 /* Command reject */
|
|
#define SNS_INTVENT 0x400000 /* Unit intervention required */
|
|
#define SNS_SPARE1 0x200000 /* Spare */
|
|
#define SNS_EQUCHK 0x100000 /* Equipment check */
|
|
#define SNS_DATCHK 0x080000 /* Data Check */
|
|
#define SNS_OVRRUN 0x040000 /* Data overrun/underrun */
|
|
#define SNS_DSKFERR 0x020000 /* Disk format error */
|
|
#define SNS_DEFTRK 0x010000 /* Defective track encountered */
|
|
|
|
/* Sense byte 2 */
|
|
#define SNS_LAST 0x8000 /* Last track flag encountered */
|
|
#define SNS_AATT 0x4000 /* At Alternate track */
|
|
#define SNS_WPER 0x2000 /* Write protection error */
|
|
#define SNS_WRL 0x1000 /* Write lock error */
|
|
#define SNS_MOCK 0x0800 /* Mode check */
|
|
#define SNS_INAD 0x0400 /* Invalid memory address */
|
|
#define SNS_RELF 0x0200 /* Release fault */
|
|
#define SNS_CHER 0x0100 /* Chaining error */
|
|
|
|
/* Sense byte 3 */
|
|
#define SNS_REVL 0x80 /* Revolution lost */
|
|
#define SNS_DADE 0x40 /* Disc addressing or seek error */
|
|
#define SNS_BUCK 0x20 /* Buffer check */
|
|
#define SNS_ECCS 0x10 /* ECC error in sector label */
|
|
#define SNS_ECCD 0x08 /* ECC error iin data */
|
|
#define SNS_ECCT 0x04 /* ECC error in track label */
|
|
#define SNS_RTAE 0x02 /* Reserve track access error */
|
|
#define SNS_UESS 0x01 /* Uncorrectable ECC error */
|
|
|
|
#define ATTR u6
|
|
/* u6 */
|
|
/* u6 holds drive attribute entry */
|
|
/* provided by inch command for controller */
|
|
/*
|
|
bits 0-7 - Flags
|
|
bits 0&1 - 00=Reserved, 01=MHD, 10=FHD, 11=MHD with FHD option
|
|
bit 2 - 1=Cartridge module drive
|
|
bit 3 - 0=Reserved
|
|
bit 4 - 1=Drive not present
|
|
bit 5 - 1=Dual Port
|
|
bit 6 - 0=Reserved
|
|
bit 7 - 0=Reserved
|
|
bits 8-15 - sector count (sectors per track)(F16=16, F20=20)
|
|
bits 16-23 - MHD Head count (number of heads on MHD)
|
|
bits 24-31 - FHD head count (number of heads on FHD or number head on FHD option of mini-module)
|
|
*/
|
|
|
|
#define DDATA up7
|
|
/* Pointer held in up7 */
|
|
/* sects/cylinder = sects/track * numhds */
|
|
/* allocated during attach command for each unit defined */
|
|
struct ddata_t
|
|
{
|
|
uint16 cyl; /* Cylinder head at */
|
|
uint16 tpos; /* Track position */
|
|
uint16 spos; /* Sector position */
|
|
};
|
|
|
|
/* disk definition structure */
|
|
struct scfi_t
|
|
{
|
|
const char *name; /* Device ID Name */
|
|
uint32 taus; /* total allocation units */
|
|
uint16 bms; /* bit map size */
|
|
uint16 nhds; /* Number of heads */
|
|
uint16 ssiz; /* sector size in words */
|
|
uint16 spt; /* # sectors per track(cylinder) */
|
|
uint8 spau; /* # sectors per allocation unit */
|
|
uint8 spb; /* # sectors per block (192 WDS)*/
|
|
uint32 cyl; /* Number of cylinders */
|
|
uint8 type; /* Device type code */
|
|
}
|
|
|
|
scfi_type[] =
|
|
{
|
|
/* Class F Disc Devices */
|
|
{"MH040", 20000, 625, 5, 192, 20, 2, 1, 400, 0x40}, /*0 411 40 M */
|
|
{"MH080", 40000, 1250, 5, 192, 20, 2, 1, 800, 0x40}, /*1 823 80 M */
|
|
{"MH160", 80000, 1250, 10, 192, 20, 4, 1, 1600, 0x40}, /*2 823 160 M */
|
|
{"MH300", 76000, 2375, 19, 192, 20, 4, 1, 800, 0x40}, /*3 823 300 M */
|
|
{"MH1GB", 87400, 2732, 1, 192, 20,16, 1,69920, 0x40}, /*4 69920 1000 M */
|
|
{"SG038", 54752, 1711, 1, 192, 20, 8, 1,21900, 0x40}, /*5 21900 38 M */
|
|
{"SG120", 174848, 5464, 1, 192, 20, 8, 1,69939, 0x40}, /*6 69939 120 M */
|
|
{"SG076", 116808, 3491, 1, 192, 20, 8, 1,46723, 0x40}, /*7 46723 76 M */
|
|
{"FH005", 5120, 184, 4, 192, 20, 1, 1, 64, 0x80}, /*8 64 5 M */
|
|
{"CD032", 8000, 250, 1, 192, 20, 2, 1, 800, 0x60}, /*9 823 32 M */
|
|
{"CD032", 8000, 250, 1, 192, 20, 2, 1, 800, 0x60}, /*10 823 32 M */
|
|
{"CD064", 8000, 250, 1, 192, 20, 2, 1, 800, 0x60}, /*11 823 64 M */
|
|
{"CD064", 24000, 750, 3, 192, 20, 2, 1, 800, 0x60}, /*12 823 64 M */
|
|
{"CD096", 8000, 250, 1, 192, 20, 2, 1, 800, 0x60}, /*13 823 96 M */
|
|
{"CD096", 40000, 1250, 5, 192, 20, 2, 1, 800, 0x60}, /*14 823 96 M */
|
|
{"MH600", 80000, 2500, 40, 192, 20, 8, 1, 800, 0x40}, /*15 843 600 M */
|
|
{"FM600", 80000, 2500, 40, 192, 20, 8, 1, 800, 0x40}, /*16 843 600 M */
|
|
{"FM600", 1600, 50, 40, 192, 20, 1, 1, 2, 0x80}, /*17 10 600 M */
|
|
{NULL, 0}
|
|
};
|
|
|
|
#if 0
|
|
*****************************************************************
|
|
* DEVICE ID TABLE
|
|
*****************************************************************
|
|
SPACE
|
|
BOUND 1W
|
|
DID.TBL EQU $
|
|
*
|
|
*DEVICE ID NAME..................................................
|
|
*TOTAL ALLOC. UNITS..................................... :
|
|
*BIT MAP SIZE .............................. : :
|
|
*NO. OF HEADS ........................ : : :
|
|
*SECTOR SIZE ................... : : : :
|
|
*SECTORS/TRACK .............. : : : : :
|
|
*SECTORS/ALOC. UNIT.......... : : : : : :
|
|
*SECTORS/BLOCK ....... : : : : : : :
|
|
*OLD DEVICE ID NAME.... : : : : : : : :
|
|
* : : : : : : : : :
|
|
* ......:..:..:...:....:....:.....:......:........:
|
|
DID FORM 32, 8, 8, 8, 8, 16, 16, 32, 64
|
|
SPACE
|
|
* CLASS 'F' EXTENDED I/O DISC DEVICES
|
|
DID C'DF01', 3, 3, 26, 64, 2, , 1334, C'FL001'
|
|
DID C'DF02', 1, 2, 20, 192, 5, 625, 20000, C'MH040'
|
|
DID C'DF03', 1, 2, 20, 192, 5, 1250, 40000, C'MH080'
|
|
DID C'DF04', 1, 4, 20, 192, 19, 2375, 76000, C'MH300'
|
|
DID C'DF0E', 1,16, 20, 192, 1, 2732, 87400, C'MH1GB'
|
|
DID C'DF05', 1, 1, 20, 192, 4, 184, 5120, C'FH005'
|
|
DID C'DF06', 1, 2, 20, 192, 1, 250, 8000, C'CD032'
|
|
DID C'DF07', 1, 2, 20, 192, 3, 750, 24000, C'CD064'
|
|
DID C'DF08', 1, 2, 20, 192, 1, 250, 8000, C'CD096'
|
|
DID C'DF08', 1, 2, 20, 192, 5, 1250, 40000, C'CD096'
|
|
DID C'DF09', 1, 8, 20, 192, 40, 2500, 80000, C'MH600'
|
|
DID C'DF0A', 1, 8, 20, 192, 40, 2500, 80000, C'FM600'
|
|
DID C'DF0B', 1, 8, 20, 192, 1, 1711, 5472, C'SG038'
|
|
DID C'DF0C', 1, 8, 20, 192, 1, 5464,174848, C'SG120'
|
|
DID C'DF0D', 1, 8, 20, 192, 1, 3491,116808, C'SG076'
|
|
DID C'DF0B', 1, 8, 20, 192, 1, 1711, 54752, C'SG038'
|
|
DID C'DF0C', 1, 8, 20, 192, 1, 5464,174848, C'SG120'
|
|
DID C'DF0D', 1, 8, 20, 192, 1, 3491,116808, C'SG076'
|
|
*
|
|
#endif
|
|
|
|
uint8 scfi_preio(UNIT *uptr, uint16 chan);
|
|
uint8 scfi_startcmd(UNIT *uptr, uint16 chan, uint8 cmd);
|
|
uint8 scfi_haltio(uint16 addr);
|
|
t_stat scfi_srv(UNIT *);
|
|
t_stat scfi_boot(int32, DEVICE *);
|
|
void scfi_ini(UNIT *, t_bool);
|
|
t_stat scfi_reset(DEVICE *);
|
|
t_stat scfi_attach(UNIT *, CONST char *);
|
|
t_stat scfi_detach(UNIT *);
|
|
t_stat scfi_set_type(UNIT *uptr, int32 val, CONST char *cptr, void *desc);
|
|
t_stat scfi_get_type(FILE * st, UNIT *uptr, int32 v, CONST void *desc);
|
|
t_stat scfi_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag, const char *cptr);
|
|
const char *scfi_description (DEVICE *dptr);
|
|
|
|
/* channel program information */
|
|
CHANP sda_chp[NUM_UNITS_SCFI] = {0};
|
|
|
|
MTAB scfi_mod[] = {
|
|
{MTAB_XTD | MTAB_VUN | MTAB_VALR, 0, "TYPE", "TYPE",
|
|
&scfi_set_type, &scfi_get_type, NULL, "Type of disk"},
|
|
{MTAB_XTD | MTAB_VUN | MTAB_VALR, 0, "DEV", "DEV", &set_dev_addr,
|
|
&show_dev_addr, NULL, "Device channel address"},
|
|
{0}
|
|
};
|
|
|
|
UNIT sda_unit[] = {
|
|
/* SET_TYPE(6) SG120 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(6), 0), 0, UNIT_ADDR(0x400)}, /* 0 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(6), 0), 0, UNIT_ADDR(0x410)}, /* 1 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(6), 0), 0, UNIT_ADDR(0x420)}, /* 2 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(6), 0), 0, UNIT_ADDR(0x430)}, /* 3 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(6), 0), 0, UNIT_ADDR(0x440)}, /* 4 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(6), 0), 0, UNIT_ADDR(0x450)}, /* 5 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(6), 0), 0, UNIT_ADDR(0x460)}, /* 6 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(6), 0), 0, UNIT_ADDR(0x470)}, /* 7 */
|
|
};
|
|
|
|
//DIB sda_dib = {scfi_preio, scfi_startcmd, NULL, NULL, NULL, scfi_ini, sda_unit, sda_chp, NUM_UNITS_SCFI, 0x0f, 0x0400, 0, 0, 0};
|
|
|
|
DIB sda_dib = {
|
|
scfi_preio, /* uint8 (*pre_io)(UNIT *uptr, uint16 chan)*/ /* Pre Start I/O */
|
|
scfi_startcmd, /* uint8 (*start_cmd)(UNIT *uptr, uint16 chan, uint8 cmd)*/ /* Start a command */
|
|
NULL, /* uint8 (*halt_io)(UNIT *uptr) */ /* Stop I/O */
|
|
NULL, /* uint8 (*test_io)(UNIT *uptr) */ /* Test I/O */
|
|
NULL, /* uint8 (*post_io)(UNIT *uptr) */ /* Post I/O */
|
|
scfi_ini, /* void (*dev_ini)(UNIT *, t_bool) */ /* init function */
|
|
sda_unit, /* UNIT* units */ /* Pointer to units structure */
|
|
sda_chp, /* CHANP* chan_prg */ /* Pointer to chan_prg structure */
|
|
NUM_UNITS_SCFI, /* uint8 numunits */ /* number of units defined */
|
|
0xF0, /* uint8 mask */ /* 16 devices - device mask */
|
|
0x0400, /* uint16 chan_addr */ /* parent channel address */
|
|
0, /* uint32 chan_fifo_in */ /* fifo input index */
|
|
0, /* uint32 chan_fifo_out */ /* fifo output index */
|
|
{0} /* uint32 chan_fifo[FIFO_SIZE] */ /* interrupt status fifo for channel */
|
|
};
|
|
|
|
DEVICE sda_dev = {
|
|
"SDA", sda_unit, NULL, scfi_mod,
|
|
NUM_UNITS_SCFI, 16, 24, 4, 16, 32,
|
|
NULL, NULL, &scfi_reset, &scfi_boot, &scfi_attach, &scfi_detach,
|
|
&sda_dib, DEV_DISABLE|DEV_DEBUG, 0, dev_debug,
|
|
NULL, NULL, &scfi_help, NULL, NULL, &scfi_description
|
|
};
|
|
|
|
#if NUM_DEVS_SCFI > 1
|
|
/* channel program information */
|
|
CHANP sdb_chp[NUM_UNITS_SCFI] = {0};
|
|
|
|
UNIT sdb_unit[] = {
|
|
/* SET_TYPE(4) DM1GB */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(4), 0), 0, UNIT_ADDR(0xC00)}, /* 0 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(4), 0), 0, UNIT_ADDR(0xC10)}, /* 1 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(4), 0), 0, UNIT_ADDR(0xC20)}, /* 2 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(4), 0), 0, UNIT_ADDR(0xC30)}, /* 3 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(4), 0), 0, UNIT_ADDR(0xC40)}, /* 4 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(4), 0), 0, UNIT_ADDR(0xC50)}, /* 5 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(4), 0), 0, UNIT_ADDR(0xC60)}, /* 6 */
|
|
{UDATA(&scfi_srv, UNIT_SCFI|SET_TYPE(4), 0), 0, UNIT_ADDR(0xC70)}, /* 7 */
|
|
};
|
|
|
|
//DIB sdb_dib = {scfi_preio, scfi_startcmd, NULL, NULL, NULL, scfi_ini, sdb_unit, sdb_chp, NUM_UNITS_SCFI, 0x0f, 0x0c00, 0, 0, 0};
|
|
|
|
DIB sdb_dib = {
|
|
scfi_preio, /* uint8 (*pre_io)(UNIT *uptr, uint16 chan)*/ /* Pre Start I/O */
|
|
scfi_startcmd, /* uint8 (*start_cmd)(UNIT *uptr, uint16 chan, uint8 cmd)*/ /* Start a command */
|
|
NULL, /* uint8 (*halt_io)(UNIT *uptr) */ /* Stop I/O */
|
|
NULL, /* uint8 (*test_io)(UNIT *uptr) */ /* Test I/O */
|
|
NULL, /* uint8 (*post_io)(UNIT *uptr) */ /* Post I/O */
|
|
scfi_ini, /* void (*dev_ini)(UNIT *, t_bool) */ /* init function */
|
|
sdb_unit, /* UNIT* units */ /* Pointer to units structure */
|
|
sdb_chp, /* CHANP* chan_prg */ /* Pointer to chan_prg structure */
|
|
NUM_UNITS_SCFI, /* uint8 numunits */ /* number of units defined */
|
|
0xF0, /* uint8 mask */ /* 16 devices - device mask */
|
|
0x0C00, /* uint16 chan_addr */ /* parent channel address */
|
|
0, /* uint32 chan_fifo_in */ /* fifo input index */
|
|
0, /* uint32 chan_fifo_out */ /* fifo output index */
|
|
0, /* uint32 chan_fifo[FIFO_SIZE] */ /* interrupt status fifo for channel */
|
|
};
|
|
|
|
DEVICE sdb_dev = {
|
|
"SDB", sdb_unit, NULL, scfi_mod,
|
|
NUM_UNITS_SCFI, 16, 24, 4, 16, 32,
|
|
NULL, NULL, &scfi_reset, &scfi_boot, &scfi_attach, &scfi_detach,
|
|
&sdb_dib, DEV_DISABLE|DEV_DEBUG, 0, dev_debug,
|
|
NULL, NULL, &scfi_help, NULL, NULL, &scfi_description
|
|
};
|
|
#endif
|
|
|
|
/* start a disk operation */
|
|
uint8 scfi_preio(UNIT *uptr, uint16 chan)
|
|
{
|
|
DEVICE *dptr = find_dev_from_unit(uptr);
|
|
int unit = (uptr - dptr->units);
|
|
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_preio CMD %08x unit=%02x\n", uptr->CMD, unit);
|
|
if ((uptr->CMD & 0xff00) != 0) { /* just return if busy */
|
|
return SNS_BSY;
|
|
}
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_preio unit=%02x\n", unit);
|
|
return 0; /* good to go */
|
|
}
|
|
|
|
uint8 scfi_startcmd(UNIT *uptr, uint16 chan, uint8 cmd) {
|
|
uint16 addr = GET_UADDR(uptr->CMD);
|
|
DEVICE *dptr = find_dev_from_unit(uptr);
|
|
int unit = (uptr - dptr->units);
|
|
uint8 ch;
|
|
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_startcmd unit %02x cmd %04x CMD %08x\n", unit, cmd, uptr->CMD);
|
|
if ((uptr->flags & UNIT_ATT) == 0) { /* unit attached status */
|
|
uptr->SNS |= SNS_INTVENT; /* unit intervention required */
|
|
if (cmd != DSK_SNS) /* we are completed with unit check status */
|
|
return SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK;
|
|
}
|
|
|
|
if ((uptr->CMD & DSK_CMDMSK) != 0) {
|
|
uptr->CMD |= DSK_BUSY; /* Flag we we are busy */
|
|
return SNS_BSY;
|
|
}
|
|
if ((uptr->CMD & 0xff00) != 0) { /* if any status info, we are busy */
|
|
return SNS_BSY;
|
|
}
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_startcmd CMD 2 unit=%02x cmd %02x\n", unit, cmd);
|
|
|
|
if ((uptr->flags & UNIT_ATT) == 0) { /* see if unit is attached */
|
|
if (cmd == DSK_SNS) { /* not attached, is cmd Sense 0x04 */
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_startcmd CMD sense\n");
|
|
/* bytes 0,1 - Cyl entry from STAR reg in CMD */
|
|
ch = (uptr->CMD >> 24) & 0xff;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_startcmd sense STAR b0 unit=%02x 1 %02x\n", unit, ch);
|
|
chan_write_byte(addr, &ch) ;
|
|
ch = (uptr->CMD >> 16) & 0xff;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_startcmd sense STAR b1 unit=%02x 1 %02x\n", unit, ch);
|
|
chan_write_byte(addr, &ch) ;
|
|
/* byte 2 - Track entry from STAR reg in CMD */
|
|
ch = (uptr->CMD >> 8) & 0xff;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_startcmd sense STAR b2 unit=%02x 1 %02x\n", unit, ch);
|
|
chan_write_byte(addr, &ch) ;
|
|
/* byte 3 - Sector entry from STAR reg in CMD */
|
|
ch = (uptr->CMD) & 0xff;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_startcmd sense STAR b3 unit=%02x 1 %02x\n", unit, ch);
|
|
chan_write_byte(addr, &ch) ;
|
|
/* bytes 4 - mode reg, byte 0 of SNS */
|
|
ch = (uptr->SNS >> 24) & 0xff; /* return the sense data for device */
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_startcmd sense unit=%02x 1 %02x\n", unit, ch);
|
|
chan_write_byte(addr, &ch) ;
|
|
/* bytes 5-7 - status bytes, bytes 1-3 of SNS */
|
|
ch = (uptr->SNS >> 16) & 0xff;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_startcmd sense unit=%02x 2 %02x\n", unit, ch);
|
|
chan_write_byte(addr, &ch) ;
|
|
ch = (uptr->SNS >> 8) & 0xff;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_startcmd sense unit=%02x 3 %02x\n", unit, ch);
|
|
chan_write_byte(addr, &ch) ;
|
|
ch = (uptr->SNS) & 0xff;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_startcmd sense unit=%02x 4 %02x\n", unit, ch);
|
|
chan_write_byte(addr, &ch) ;
|
|
/* bytes 8-11 - drive attribute register (DATR) entries from uptr->ATTR via INCH cmd */
|
|
ch = (uptr->ATTR >> 24) & 0xff;
|
|
chan_write_byte(addr, &ch) ;
|
|
ch = (uptr->ATTR >> 16) & 0xff;
|
|
chan_write_byte(addr, &ch) ;
|
|
ch = (uptr->ATTR >> 8 ) & 0xff;
|
|
chan_write_byte(addr, &ch) ;
|
|
ch = (uptr->ATTR >> 0) & 0xff;
|
|
chan_write_byte(addr, &ch) ;
|
|
/* bytes 12 & 13 contain drive related status */
|
|
ch = 0; /* zero for now */
|
|
chan_write_byte(addr, &ch) ;
|
|
chan_write_byte(addr, &ch) ;
|
|
|
|
uptr->SNS &= 0xff000000; /* clear status bytes, but leave mode data */
|
|
return SNS_CHNEND|SNS_DEVEND;
|
|
}
|
|
if (cmd == 0x00) /* INCH cmd gives unit check */
|
|
return SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK;
|
|
|
|
uptr->SNS |= (SNS_INTVENT|SNS_CMDREJ); /* set new error status */
|
|
return SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK; /* we done */
|
|
}
|
|
|
|
/* Unit is online, so process a command */
|
|
switch (cmd) {
|
|
|
|
case DSK_INCH: /* INCH 0x00 */
|
|
{
|
|
uint32 mema; /* memory address */
|
|
uint32 i;
|
|
UNIT *up = dptr->units; /* first unit for this device */
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"scfi_startcmd starting inch cmd addr %04x CMD %08x\n", addr, uptr->CMD);
|
|
/* CMD has IOCD word 1 contents. For the disk processor it contains */
|
|
/* a pointer to the INCH buffer followed by 8 drive attribute words that */
|
|
/* contains the flags, sector count, MHD head count, and FHD count */
|
|
/* us9 has the byte count from IOCD wd2 and should be 0x24 (36) */
|
|
/* the INCH buffer address must be returned in CMD and us9 left non-zero */
|
|
/* just return OK and channel software will use up8 as status buffer */
|
|
mema = (uint32)uptr->CMD; /* get memory address of buffer */
|
|
uptr->CMD = M[mema>>2]; /* get status buffer address for XIO return status */
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"scfi_startcmd starting inch cmd addr %04x CMD %08x mema %08x units %02x\n",
|
|
addr, uptr->CMD, mema, dptr->numunits);
|
|
/* the next 8 words have drive data for each unit */
|
|
/* WARNING 8 drives must be defined for this controller */
|
|
/* so we will not have a map fault */
|
|
for (i=0; i<dptr->numunits && i<8; i++) { /* process all drives */
|
|
up->ATTR = M[(mema>>2)+i+1]; /* save each unit's drive data */
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"scfi_startcmd ATTR data %08x unit %02x flags %02x sec %02x MHD %02x FHD %02x\n",
|
|
up->ATTR, i, (up->ATTR >> 24)&0xff, (up->ATTR >> 16)&0xff,
|
|
(up->ATTR >> 8)&0xff, (up->ATTR&0xff));
|
|
up++; /* next unit for this device */
|
|
}
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_startcmd done INCH cmd addr %04x\n", addr);
|
|
// return SNS_CHNEND|SNS_DEVEND;
|
|
// break;
|
|
uptr->CMD |= DSK_INCH2; /* use 0xf0 for inch, just need int */
|
|
sim_activate(uptr, 20); /* start things off */
|
|
return (0);
|
|
break;
|
|
}
|
|
|
|
case DSK_SCK: /* Seek command 0x07 */
|
|
case DSK_XEZ: /* Rezero & Read IPL record 0x1f */
|
|
uptr->CMD &= ~(DSK_STAR); /* show we do not have seek STAR in CMD */
|
|
case DSK_WD: /* Write command 0x01 */
|
|
case DSK_RD: /* Read command 0x02 */
|
|
case DSK_LMR: /* read mode register */
|
|
|
|
uptr->CMD |= cmd; /* save cmd */
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"scfi_startcmd done with disk seek r/w cmd %02x addr %04x\n", cmd, addr);
|
|
sim_activate(uptr, 20); /* start things off */
|
|
return 0;
|
|
break;
|
|
|
|
case DSK_NOP: /* NOP 0x03 */
|
|
// return SNS_CHNEND|SNS_DEVEND; /* return OK */
|
|
uptr->CMD |= cmd; /* save cmd */
|
|
sim_activate(uptr, 20); /* start things off */
|
|
return 0;
|
|
break;
|
|
|
|
case DSK_SNS: /* Sense 0x04 */
|
|
uptr->CMD |= cmd; /* save cmd */
|
|
sim_activate(uptr, 20); /* start things off */
|
|
return 0;
|
|
break;
|
|
}
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"scfi_startcmd done with scfi_startcmd %02x addr %04x SNS %08x\n",
|
|
cmd, addr, uptr->SNS);
|
|
if (uptr->SNS & 0xff)
|
|
return SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK;
|
|
sim_activate(uptr, 20); /* start things off */
|
|
return SNS_CHNEND|SNS_DEVEND;
|
|
}
|
|
|
|
/* Handle processing of disk requests. */
|
|
t_stat scfi_srv(UNIT *uptr)
|
|
{
|
|
uint16 chsa = GET_UADDR(uptr->CMD);
|
|
DEVICE *dptr = find_dev_from_unit(uptr);
|
|
DIB *dibp = (DIB *)dptr->ctxt; /* get pointer to Dev Info Blk for this device */
|
|
CHANP *chp = (CHANP *)dibp->chan_prg; /* get pointer to channel program */
|
|
struct ddata_t *data = (struct ddata_t *)(uptr->up7);
|
|
int cmd = uptr->CMD & DSK_CMDMSK;
|
|
int type = GET_TYPE(uptr->flags);
|
|
int32 trk, cyl;
|
|
int unit = (uptr - dptr->units);
|
|
int len;
|
|
int dlen = 0; /* total bytes processed */
|
|
int i;
|
|
uint8 ch;
|
|
// int tsize = scfi_type[type].spt * scfi_type[type].ssiz*4; /* get track size in bytes */
|
|
uint16 ssize = scfi_type[type].ssiz*4; /* Size of one sector in bytes */
|
|
int32 tstart = 0; /* Location of start of cyl/track/sect in data */
|
|
uint8 buf2[1024];
|
|
uint8 buf[1024];
|
|
|
|
sim_debug(DEBUG_DETAIL, &sda_dev, "scfi_srv entry unit %02x cmd %02x chsa %04x chan %04x count %04x\n",
|
|
unit, cmd, chsa, chsa>>8, chp->ccw_count);
|
|
|
|
// if ((uptr->flags & UNIT_ATT) == 0) { /* unit attached status */
|
|
// return SCPE_OK;
|
|
// }
|
|
if ((uptr->flags & UNIT_ATT) == 0) { /* unit attached status */
|
|
uptr->SNS |= SNS_INTVENT; /* unit intervention required */
|
|
if (cmd != DSK_SNS) /* we are completed with unit check status */
|
|
return SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK;
|
|
}
|
|
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_srv cmd=%02x chsa %04x count %04x\n", cmd, chsa, chp->ccw_count);
|
|
switch (cmd) {
|
|
case 0: /* No command, stop disk */
|
|
break;
|
|
|
|
case DSK_INCH2: /* use 0xff for inch, just need int */
|
|
uptr->CMD &= ~(0xffff); /* remove old cmd */
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"scfi_srv cmd INCH chsa %04x count %04x completed\n", chsa, chp->ccw_count);
|
|
chan_end(chsa, SNS_CHNEND); /* return just channel end */
|
|
break;
|
|
|
|
case DSK_NOP: /* NOP 0x03 */
|
|
uptr->CMD &= ~(0xffff); /* remove old cmd */
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"scfi_srv cmd NOP chsa %04x count %04x completed\n", chsa, chp->ccw_count);
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND); /* return OK */
|
|
break;
|
|
|
|
case DSK_SNS: /* 0x4 */
|
|
ch = uptr->SNS & 0xff;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv sense unit=%02x 1 %02x\n", unit, ch);
|
|
chan_write_byte(chsa, &ch) ;
|
|
ch = (uptr->SNS >> 8) & 0xff;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv sense unit=%02x 2 %02x\n", unit, ch);
|
|
chan_write_byte(chsa, &ch) ;
|
|
ch = 0;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv sense unit=%02x 3 %02x\n", unit, ch);
|
|
chan_write_byte(chsa, &ch) ;
|
|
ch = unit;
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv sense unit=%02x 4 %02x\n", unit, ch);
|
|
chan_write_byte(chsa, &ch) ;
|
|
ch = 4;
|
|
sim_debug(DEBUG_CMD, dptr, "DISK SENSE %02x chars complete %08x, unit %02x\n",
|
|
ch, uptr->SNS, unit);
|
|
uptr->CMD &= ~(0xff00);
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND);
|
|
break;
|
|
|
|
case DSK_SCK: /* Seek cylinder, track, sector 0x07 */
|
|
|
|
/* If we are waiting on seek to finish, check if there yet. */
|
|
if (uptr->CMD & DSK_SEEKING) {
|
|
/* see if on cylinder yet */
|
|
if ((uptr->CMD >> 16) == data->cyl) {
|
|
/* we are on cylinder, seek is done */
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_srv seek on cylinder unit=%02x %04x %04x\n",
|
|
unit, uptr->CMD >> 16, data->cyl);
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
set_devattn(chsa, SNS_DEVEND); /* start the operation */
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv seek end unit=%02x %04x %04x\n",
|
|
unit, uptr->CMD >> 16, data->cyl);
|
|
sim_activate(uptr, 20);
|
|
break;
|
|
} else {
|
|
/* Compute delay based of difference. */
|
|
/* Set next state = index */
|
|
i = (uptr->CMD >> 16) - data->cyl;
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_srv seek unit=%02x %04x %04x\n", unit, uptr->CMD >> 16, i);
|
|
if (i > 0 ) {
|
|
if (i > 50) {
|
|
data->cyl += 50; /* seek 50 cyl */
|
|
sim_activate(uptr, 800);
|
|
} else
|
|
if (i > 20) {
|
|
data->cyl += 20; /* seek 20 cyl */
|
|
sim_activate(uptr, 400);
|
|
} else {
|
|
data->cyl++; /* Seek 1 cyl */
|
|
sim_activate(uptr, 200);
|
|
}
|
|
if (data->cyl >= scfi_type[type].cyl) /* test for over max */
|
|
data->cyl = scfi_type[type].cyl-1; /* make max */
|
|
} else {
|
|
if (i < -50) {
|
|
data->cyl -= 50; /* seek 50 cyl */
|
|
sim_activate(uptr, 800);
|
|
} else
|
|
if (i < -20) {
|
|
data->cyl -= 20; /* seek 20 cyl */
|
|
sim_activate(uptr, 400);
|
|
} else {
|
|
data->cyl--; /* seek 1 cyl */
|
|
sim_activate(uptr, 200);
|
|
}
|
|
if ((int32)data->cyl < 0) /* test for less than zero */
|
|
data->cyl = 0; /* make zero */
|
|
}
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv seek next unit=%02x %04x %04x\n",
|
|
unit, uptr->CMD >> 16, data->cyl);
|
|
sim_activate(uptr, 2);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* not seeking, so start a new seek */
|
|
/* Read in 4 character seek code */
|
|
for (i = 0; i < 4; i++) {
|
|
if (chan_read_byte(chsa, &buf[i])) {
|
|
/* we have error, bail out */
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
uptr->SNS |= SNS_CMDREJ|SNS_EQUCHK;
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK);
|
|
break;
|
|
}
|
|
}
|
|
rezero:
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv seek unit=%02x star %02x %02x %02x %02x\n",
|
|
unit, buf[0], buf[1], buf[2], buf[3]);
|
|
/* save STAR (target sector) data in CMD */
|
|
uptr->CMD = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | (buf[3]);
|
|
cyl = uptr->CMD >> 16; /* get the cylinder */
|
|
trk = buf[2]; /* get the track */
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv SEEK %08x cyl %04x trk %02x sec %02x unit=%02x\n",
|
|
uptr->CMD, cyl&0xffff, trk, buf[3], unit);
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv Disk %s cyl %04x hds %02x sec/trk %02x unit=%02x\n",
|
|
scfi_type[type].name, scfi_type[type].cyl, scfi_type[type].nhds, scfi_type[type].spt, unit);
|
|
|
|
uptr->CMD |= DSK_STAR; /* show we have seek STAR in CMD */
|
|
/* calc the sector address of data */
|
|
/* calculate file position in bytes of requested sector */
|
|
/* file offset in bytes */
|
|
tstart = uptr->CMD * (scfi_type[type].spb * scfi_type[type].ssiz * 4);
|
|
data->tpos = trk; /* save the track/head number */
|
|
data->spos = buf[3]; /* save the sector number */
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv seek start %08x trk %04x sec %02x\n", tstart, trk, buf[3]);
|
|
if ((sim_fseek(uptr->fileref, tstart, SEEK_SET)) != 0) { /* seek home */
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv Error on seek to %08x\n", tstart);
|
|
}
|
|
|
|
/* Check if already on correct cylinder */
|
|
if (cyl != data->cyl) {
|
|
/* No, Do seek */
|
|
uptr->CMD |= DSK_SEEKING; /* show we are seeking */
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv seek unit=%02x cyl %04x trk %04x sec %04x\n",
|
|
unit, cyl, trk, buf[3]);
|
|
sim_activate(uptr, 20);
|
|
chan_end(chsa, SNS_CHNEND);
|
|
} else {
|
|
sim_debug(DEBUG_DETAIL, dptr, "scfi_srv calc sect addr seek start %08x cyl %04x trk %04x sec %02x\n",
|
|
tstart, cyl, trk, buf[3]);
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
sim_activate(uptr, 20);
|
|
chan_end(chsa, SNS_DEVEND|SNS_CHNEND);
|
|
}
|
|
return SCPE_OK;
|
|
|
|
case DSK_XEZ: /* Rezero & Read IPL record */
|
|
|
|
sim_debug(DEBUG_CMD, dptr, "RD REZERO IPL unit=%02x seek 0\n", unit);
|
|
/* Do a seek to 0 */
|
|
uptr->CMD = 0; /* set STAR to 0, 0, 0 */
|
|
uptr->CMD &= ~(0xffff); /* remove old cmd */
|
|
uptr->CMD |= DSK_SCK; /* show as seek command */
|
|
tstart = 0; /* byte offset is 0 */
|
|
dlen = 0; /* no data written yet */
|
|
/* Read in 1 dummy character for length to inhibit SLI posting */
|
|
if (chan_read_byte(chsa, &buf[0])) {
|
|
/* we have error, bail out */
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
uptr->SNS |= SNS_CMDREJ|SNS_EQUCHK;
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK);
|
|
break;
|
|
}
|
|
/* zero stuff */
|
|
buf[0] = buf[1] = buf[2] = buf[3] = 0;
|
|
goto rezero; /* murge with seek code */
|
|
break;
|
|
|
|
case DSK_LMR:
|
|
sim_debug(DEBUG_CMD, dptr, "Load Mode Reg unit=%02x\n", unit);
|
|
/* Read in 1 character of mode data */
|
|
if (chan_read_byte(chsa, &buf[0])) {
|
|
/* we have error, bail out */
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
uptr->SNS |= SNS_CMDREJ|SNS_EQUCHK;
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK);
|
|
break;
|
|
}
|
|
uptr->CMD &= ~(0xffff); /* remove old cmd */
|
|
uptr->SNS &= 0x00ffffff; /* clear old mode data */
|
|
uptr->SNS |= (buf[0] << 24); /* save mode value */
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND);
|
|
break;
|
|
|
|
case DSK_RD: /* Read Data */
|
|
/* tstart has start of sector address in bytes */
|
|
if ((uptr->CMD & DSK_READING) == 0) { /* see if we are reading data */
|
|
uptr->CMD |= DSK_READING; /* read from disk starting */
|
|
dlen = 0; /* no data read yet */
|
|
sim_debug(DEBUG_CMD, dptr, "DISK READ starting unit=%02x CMD %08x count %04x\n",
|
|
unit, uptr->CMD, chp->ccw_count);
|
|
}
|
|
|
|
if (uptr->CMD & DSK_READING) { /* see if we are reading data */
|
|
/* read in a sector of data from disk */
|
|
if ((len=sim_fread(buf, 1, ssize, uptr->fileref)) != ssize) {
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"Error %08x on read %04x of diskfile cyl %04x hds %02x sec %02x\n",
|
|
len, ssize, data->cyl, data->tpos, data->spos);
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK);
|
|
break;
|
|
}
|
|
|
|
sim_debug(DEBUG_CMD, dptr, "scfi_srv after READ chsa %04x count %04x\n", chsa, chp->ccw_count);
|
|
/* process the next sector of data */
|
|
for (i=0; i<len; i++) {
|
|
ch = buf[i]; /* get a char from buffer */
|
|
if (chan_write_byte(chsa, &ch)) { /* put a byte to memory */
|
|
sim_debug(DEBUG_DATA, dptr,
|
|
"DISK Read %04x bytes from diskfile cyl %04x hds %02x sec %02x tstart %08x\n",
|
|
dlen+i, data->cyl, data->tpos, data->spos, tstart);
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND);
|
|
goto rddone;
|
|
}
|
|
}
|
|
dlen += len; /* add byte read to total count */
|
|
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"DISK READ from sec end %04x bytes end %04x from diskfile cyl %04x hds %02x sec %02x tstart %08x\n",
|
|
dlen, ssize, data->cyl, data->tpos, data->spos, tstart);
|
|
data->spos++;
|
|
/* see if we are done reading data */
|
|
if (test_write_byte_end(chsa)) {
|
|
sim_debug(DEBUG_DATA, dptr,
|
|
"DISK Read complete Read %04x bytes from diskfile cyl %04x hds %02x sec %02x tstart %08x\n",
|
|
dlen, data->cyl, data->tpos, data->spos, tstart);
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND);
|
|
}
|
|
rddone:
|
|
sim_activate(uptr, 10); /* wait to read next sector */
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case DSK_WD: /* Write Data */
|
|
/* tstart has start of sector address in bytes */
|
|
if ((uptr->CMD & DSK_WRITING) == 0) { /* see if we are writing data */
|
|
uptr->CMD |= DSK_WRITING; /* write to disk starting */
|
|
dlen = 0; /* no data written yet */
|
|
sim_debug(DEBUG_CMD, dptr, "DISK WRITE starting unit=%02x CMD %08x bytes %04x\n",
|
|
unit, uptr->CMD, dlen);
|
|
}
|
|
if (uptr->CMD & DSK_WRITING) { /* see if we are writing data */
|
|
/* process the next sector of data */
|
|
len = 0; /* used here as a flag for short read */
|
|
for (i=0; i<ssize; i++) {
|
|
if (chan_read_byte(chsa, &ch)) { /* get a byte from memory */
|
|
/* if error on reading 1st byte, we are done writing */
|
|
if (i == 0) {
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
sim_debug(DEBUG_DATA, dptr,
|
|
"DISK Wrote %04x bytes to diskfile cyl %04x hds %02x sec %02x tstart %08x\n",
|
|
ssize, data->cyl, data->tpos, data->spos, tstart);
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND);
|
|
goto wrdone;
|
|
}
|
|
ch = 0; /* finish out the sector with zero */
|
|
len++; /* show we have no more data to write */
|
|
}
|
|
buf2[i] = ch; /* save the char */
|
|
}
|
|
dlen += ssize; /* add 1 sector of bytes */
|
|
/* write the sector to disk */
|
|
if ((i=sim_fwrite(buf2, 1, ssize, uptr->fileref)) != ssize) {
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"Error %08x on write %04x to diskfile cyl %04x hds %02x sec %02x\n",
|
|
i, ssize, data->cyl, data->tpos, data->spos);
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK);
|
|
break;
|
|
}
|
|
if (len != 0) { /* see if done with write command */
|
|
sim_debug(DEBUG_DATA, dptr,
|
|
"DISK WroteB %04x bytes to diskfile cyl %04x hds %02x sec %02x tstart %08x\n",
|
|
ssize, data->cyl, data->tpos, data->spos, tstart);
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND); /* we done */
|
|
break;
|
|
}
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"DISK WR to sec end %04x bytes end %04x to diskfile cyl %04x hds %02x sec %02x tstart %08x\n",
|
|
dlen, ssize, data->cyl, data->tpos, data->spos, tstart);
|
|
data->spos++;
|
|
wrdone:
|
|
sim_activate(uptr, 10);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
sim_debug(DEBUG_DETAIL, dptr, "invalid command %02x unit %02x\n", cmd, unit);
|
|
uptr->SNS |= SNS_CMDREJ;
|
|
uptr->CMD &= ~(0xffff); /* remove old status bits & cmd */
|
|
chan_end(chsa, SNS_CHNEND|SNS_DEVEND|SNS_UNITCHK);
|
|
break;
|
|
}
|
|
sim_debug(DEBUG_CMD, dptr,
|
|
"scfi_srv done cmd %02x chsa %04x count %04x\n", cmd, chsa, chp->ccw_count);
|
|
return SCPE_OK;
|
|
}
|
|
|
|
/* initialize the disk */
|
|
void scfi_ini(UNIT *uptr, t_bool f)
|
|
{
|
|
DEVICE *dptr = find_dev_from_unit(uptr);
|
|
int i = GET_TYPE(uptr->flags);
|
|
|
|
uptr->CMD &= ~0xffff; /* clear out the flags but leave ch/sa */
|
|
/* capacity is total allocation units times sectors per allocation unit */
|
|
/* total sectors on disk */
|
|
uptr->capac = scfi_type[i].taus * scfi_type[i].spau;
|
|
|
|
sim_debug(DEBUG_EXP, &sda_dev, "SDA init device %s on unit SDA%.1x cap %x\n",
|
|
dptr->name, GET_UADDR(uptr->CMD), uptr->CMD);
|
|
}
|
|
|
|
t_stat scfi_reset(DEVICE * dptr)
|
|
{
|
|
/* add reset code here */
|
|
return SCPE_OK;
|
|
}
|
|
|
|
/* create the disk file for the specified device */
|
|
int scfi_format(UNIT *uptr) {
|
|
// struct ddata_t *data = (struct ddata_t *)uptr->up7;
|
|
uint16 addr = GET_UADDR(uptr->CMD);
|
|
int type = GET_TYPE(uptr->flags);
|
|
DEVICE *dptr = find_dev_from_unit(uptr);
|
|
uint16 tsize = scfi_type[type].spt * scfi_type[type].ssiz*4; /* get track size in bytes */
|
|
int32 ssize = scfi_type[type].ssiz * 4; /* disk sector size in bytes */
|
|
uint32 cyl;
|
|
uint16 spc = scfi_type[type].nhds * scfi_type[type].spt; /* sectors/cyl */
|
|
uint32 cap = scfi_type[type].taus * scfi_type[type].spau; /* disk capacity in sectors */
|
|
uint32 cylv = cap / spc; /* calc number of cylinders */
|
|
uint8 *buff;
|
|
|
|
/* see if user wants to initialize the disk */
|
|
if (!get_yn("Initialize disk? [Y] ", TRUE)) {
|
|
return 1;
|
|
}
|
|
|
|
/* seek to sector 0 */
|
|
if ((sim_fseek(uptr->fileref, 0, SEEK_SET)) != 0) { /* seek home */
|
|
fprintf (stderr, "Error on seek to 0\r\n");
|
|
}
|
|
|
|
/* get buffer for track data */
|
|
if ((buff = (uint8 *)calloc(tsize, sizeof(uint8))) == 0) {
|
|
detach_unit(uptr);
|
|
return SCPE_ARG;
|
|
}
|
|
/* put dummy data in first word of disk */
|
|
buff[0] = 'Z';
|
|
buff[1] = 'E';
|
|
buff[2] = 'R';
|
|
buff[3] = 'O';
|
|
sim_debug(DEBUG_CMD, dptr, "Creating disk file of trk size %04x capacity %d\n", tsize, cap*ssize);
|
|
/* write zeros to each track of the disk */
|
|
for (cyl = 0; cyl < cylv; cyl++) {
|
|
if ((sim_fwrite(buff, 1, tsize, uptr->fileref)) != tsize) {
|
|
sim_debug(DEBUG_CMD, dptr, "Error on write to diskfile cyl %04x\n", cyl);
|
|
}
|
|
if (cyl == 0) {
|
|
buff[0] = 0;
|
|
buff[1] = 0;
|
|
buff[2] = 0;
|
|
buff[3] = 0;
|
|
}
|
|
}
|
|
if ((cyl % 400) == 0)
|
|
fputc('.', stderr);
|
|
fputc('\r', stderr);
|
|
fputc('\n', stderr);
|
|
/* seek home again */
|
|
sim_fseek(uptr->fileref, 0, SEEK_SET); /* seek home */
|
|
free(buff); /* free cylinder buffer */
|
|
set_devattn(addr, SNS_DEVEND); /* start us up */
|
|
return 0;
|
|
}
|
|
|
|
/* attach the selected file to the disk */
|
|
t_stat scfi_attach(UNIT *uptr, CONST char *file) {
|
|
uint16 addr = GET_UADDR(uptr->CMD);
|
|
int type = GET_TYPE(uptr->flags);
|
|
DEVICE *dptr = find_dev_from_unit(uptr);
|
|
t_stat r;
|
|
// uint16 tsize; /* track size in bytes */
|
|
uint16 ssize; /* sector size in bytes */
|
|
struct ddata_t *data;
|
|
uint8 buff[1024];
|
|
|
|
/* have simulator attach the file to the unit */
|
|
if ((r = attach_unit(uptr, file)) != SCPE_OK)
|
|
return r;
|
|
|
|
if (scfi_type[type].name == 0) { /* does the assigned disk have a name */
|
|
detach_unit(uptr); /* no, reject */
|
|
return SCPE_FMT; /* error */
|
|
}
|
|
|
|
/* get a buffer to hold scfi_t structure */
|
|
/* extended data structure per unit */
|
|
if ((data = (struct ddata_t *)calloc(1, sizeof(struct ddata_t))) == 0) {
|
|
detach_unit(uptr);
|
|
return SCPE_FMT;
|
|
}
|
|
|
|
uptr->up7 = (void *)data; /* save pointer to structure in up7 */
|
|
/* track size in bytes is sectors/track times words/sector time 4 bytse/word */
|
|
// tsize = scfi_type[type].spt * scfi_type[type].ssiz * 4; /* get track size in bytes */
|
|
uptr->capac = scfi_type[type].taus * scfi_type[type].spau; /* disk capacity in sectors */
|
|
ssize = scfi_type[type].ssiz * 4; /* disk sector size in bytes */
|
|
uptr->capac *= ssize; /* disk capacity in bytes */
|
|
|
|
sim_debug(DEBUG_CMD, dptr, "Disk taus %d spau %d ssiz %d cap %d\n",
|
|
scfi_type[type].taus, scfi_type[type].spau, scfi_type[type].ssiz * 4,
|
|
uptr->capac); /* disk capacity */
|
|
|
|
if ((sim_fseek(uptr->fileref, 0, SEEK_SET)) != 0) { /* seek home */
|
|
detach_unit(uptr); /* if no space, error */
|
|
return SCPE_FMT; /* error */
|
|
}
|
|
|
|
/* read in the 1st sector of the 'disk' */
|
|
if ((r = sim_fread(&buff[0], sizeof(uint8), ssize, uptr->fileref) != ssize)) {
|
|
sim_debug(DEBUG_CMD, &sda_dev, "Disk format fread ret = %04x\n", r);
|
|
goto fmt;
|
|
}
|
|
|
|
if ((buff[0] | buff[1] | buff[2] | buff[3]) == 0) {
|
|
sim_debug(DEBUG_CMD, &sda_dev,
|
|
"Disk format buf0 %02x buf1 %02x buf2 %02x buf3 %02x\n",
|
|
buff[0], buff[1], buff[2], buff[3]);
|
|
fmt:
|
|
/* format the drive */
|
|
if (scfi_format(uptr)) {
|
|
detach_unit(uptr); /* if no space, error */
|
|
return SCPE_FMT; /* error */
|
|
}
|
|
}
|
|
|
|
if ((sim_fseek(uptr->fileref, 0, SEEK_SET)) != 0) { /* seek home */
|
|
detach_unit(uptr); /* if no space, error */
|
|
return SCPE_FMT; /* error */
|
|
}
|
|
|
|
data->cyl = 0; /* current cylinder position */
|
|
data->tpos = 0; /* current track position */
|
|
data->spos = 0; /* current sector position */
|
|
|
|
sim_debug(DEBUG_CMD, &sda_dev, "Attach %8s hds %d spt %d spc %d cyl %d capacity %d\n",
|
|
scfi_type[type].name, scfi_type[type].nhds, scfi_type[type].spt,
|
|
scfi_type[type].nhds * scfi_type[type].spt,
|
|
scfi_type[type].cyl, uptr->capac);
|
|
sim_debug(DEBUG_CMD, &sda_dev, "File %s attached to %s\r\n", file, scfi_type[type].name);
|
|
|
|
set_devattn(addr, SNS_DEVEND);
|
|
return SCPE_OK;
|
|
}
|
|
|
|
/* detach a disk device */
|
|
t_stat scfi_detach(UNIT *uptr) {
|
|
struct ddata_t *data = (struct ddata_t *)uptr->up7;
|
|
|
|
if (data != 0) {
|
|
free(data); /* free disk data structure */
|
|
}
|
|
uptr->up7 = 0; /* no pointer to disk data */
|
|
uptr->CMD &= ~0xffff; /* no cmd and flags */
|
|
return detach_unit(uptr); /* tell simh we are done with disk */
|
|
}
|
|
|
|
/* boot from the specified disk unit */
|
|
t_stat scfi_boot(int32 unit_num, DEVICE *dptr) {
|
|
UNIT *uptr = &dptr->units[unit_num]; /* find disk unit number */
|
|
|
|
sim_debug(DEBUG_CMD, &sda_dev, "SCFI Disk Boot dev/unit %04x\n", GET_UADDR(uptr->CMD));
|
|
SPAD[0xf4] = GET_UADDR(uptr->CMD); /* put boot device chan/sa into spad */
|
|
SPAD[0xf8] = 0xF000; /* show as F class device */
|
|
if ((uptr->flags & UNIT_ATT) == 0)
|
|
return SCPE_UNATT; /* attached? */
|
|
return chan_boot(GET_UADDR(uptr->CMD), dptr); /* boot the ch/sa */
|
|
}
|
|
|
|
/* Disk option setting commands */
|
|
t_stat scfi_set_type(UNIT *uptr, int32 val, CONST char *cptr, void *desc)
|
|
{
|
|
int i;
|
|
|
|
if (cptr == NULL)
|
|
return SCPE_ARG;
|
|
if (uptr == NULL)
|
|
return SCPE_IERR;
|
|
if (uptr->flags & UNIT_ATT)
|
|
return SCPE_ALATT;
|
|
for (i = 0; scfi_type[i].name != 0; i++) {
|
|
if (strcmp(scfi_type[i].name, cptr) == 0) {
|
|
uptr->flags &= ~UNIT_TYPE;
|
|
uptr->flags |= SET_TYPE(i);
|
|
uptr->capac = scfi_type[i].taus * scfi_type[i].spau;
|
|
return SCPE_OK;
|
|
}
|
|
}
|
|
return SCPE_ARG;
|
|
}
|
|
|
|
t_stat scfi_get_type(FILE * st, UNIT *uptr, int32 v, CONST void *desc)
|
|
{
|
|
if (uptr == NULL)
|
|
return SCPE_IERR;
|
|
fputs("TYPE=", st);
|
|
fputs(scfi_type[GET_TYPE(uptr->flags)].name, st);
|
|
return SCPE_OK;
|
|
}
|
|
|
|
/* help information for disk */
|
|
t_stat scfi_help (FILE *st, DEVICE *dptr, UNIT *uptr, int32 flag,
|
|
const char *cptr)
|
|
{
|
|
int i;
|
|
fprintf (st, "SEL-32 SCFI Disk Processor\r\n");
|
|
fprintf (st, "Use:\r\n");
|
|
fprintf (st, " sim> SET %sn TYPE=type\r\n", dptr->name);
|
|
fprintf (st, "Type can be: ");
|
|
for (i = 0; scfi_type[i].name != 0; i++) {
|
|
fprintf(st, "%s", scfi_type[i].name);
|
|
if (scfi_type[i+1].name != 0)
|
|
fprintf(st, ", ");
|
|
}
|
|
fprintf (st, ".\nEach drive has the following storage capacity:\r\n");
|
|
for (i = 0; scfi_type[i].name != 0; i++) {
|
|
/* disk capacity in sectors */
|
|
int32 capac = scfi_type[i].taus * scfi_type[i].spau;
|
|
int32 ssize = scfi_type[i].ssiz * 4; /* disk sector size in bytes */
|
|
int32 size = capac * ssize; /* disk capacity in bytes */
|
|
size /= 1024; /* make KB */
|
|
size = (10 * size) / 1024; /* size in MB * 10 */
|
|
fprintf(st, " %-8s %4d.%1d MB\r\n", scfi_type[i].name, size/10, size%10);
|
|
}
|
|
fprint_set_help(st, dptr);
|
|
fprint_show_help(st, dptr);
|
|
return SCPE_OK;
|
|
}
|
|
|
|
const char *scfi_description (DEVICE *dptr)
|
|
{
|
|
return "SEL-32 SCFI Disk Processor";
|
|
}
|
|
|
|
#endif
|