In https:://github.com/open-simh/simh PR number 154 nickd4 that 2 argument
floating point instructions were displayed with the wrong argument order.
This change fixes BOTH the instruction display and the input activities for
these floating point instructions.
* VIDEO: Fix bug: vid_ready can be used uninitialized.
* VIDEO: Not all events come with a valid windowID.
* PDP11: Fix NG SET TYPE.
The sense of MATCH_CMD is reversed.
* display: Fix bug in NG display controller.
There should be a separate state for each of the eight displays.
* display: Symbolic constant for number of displays.
Simulators built with DONT_USE_INTERNAL_ROM defined will not have hte
binary of the needed ROM or boot components build into the simulator
binaries. However, they will automatically and transparently fetch the
neeeded ROM or boot code from the web when these binary files aren't
available locally.
- Plan is to avoid "#ifdef DONT_USE_INTERNAL_ROM" in simulator code
and handle builtin or external files in SCP facilities
- Export ROM checksum value and source file path to allow for transparent
dynamic ROM location at run time.
There are a lot of niggling fixes, mostly for incompatibility issues
found by Walter Mueller. Working out the 11/70 behavior is still not
fully done, but it's a lot better than it was, and it passes more of the
11/70 MMU diagnostic.
- Floating point. Now model sensitive in treating MMR1, for 2.11 BSD.
- MMR1 now tracks PC changes on 11/44, 11/45, 11/70, and J11 -(PC) and @-(PC).
- MMR1 is cleared at start of trap sequence on 11/45, 11/70.
- Red stack abort occurs before memory writes on 11/45, 11/70 (no other model has them).
There are 3 variations of RH11:
- 11/70 Massbus adapter AKA RH70.
- All other PDP11 systems had a Massbus adapter known as the RH11.
- Qbus PDP11 systems had a Massbus adapter known as a RH70 emulator.
This commit extends the existing DUP11/DPV11 support to add support for HDLC framing. There
is no requirement to support bit/byte stuffing, so the aim is simply to encapsulate/decapsulate
the datalink frame provided by the host driver.
DDCMP has been regression tested on VMS, RSX and TOPS20, and the HDLC mode was developed
and tested with VAX/VMS DECnet Phase V, only using the HDLC datalink implementation.
In theory this support is sufficient to allow Phase IV/V P.S.I and even VMS/SNA to be used,
but these remain to be demonstrated.
Correct RBUF_GETLINE & RBUF_PUTLINE: these are both sensitive to
modeling DHU vs. DHV; the correct bit mask was not generated for DHU.
Make certain the device presents 16 lines when modeling a DHU.
If the number of lines on a Qbus system has previously been changed
to an odd multiple of and then the bus type changed to Unibus, we
to change the number of lines to a multiple of 16 for the DHU.
If autoconfigure is disabled, either explicitly or implicitly by manual
setting of an ADDRESS or VECTOR, detect devices which don't have
addresses before boot.
