Mark Pizzolato 5bce9da97c QVSS: Fix to get the VSYNC interrupts to be more reasonable. Addresses Issue #88. From Mike Burke ...

The vertical sync interrupt generated in vc_svc() was too slow for Ultrix. The driver enables interrupts and then calls DELAY(20000), which I guess is 20ms. This translates to about 10000 simulated instructions, but tmxr_poll works out at ~75000 instructions.  I've added a new unit to simulate just the vsync interrupts activating every 8000 instructions.

This approach will completely disable the ability to idle while the QVSS device is enabled.

2013-11-06 17:00:36 -08:00

..

ka610.bin

Addition of MicroVAX I (VAX610) processor simulator from Matt Burke

2012-10-25 11:58:10 -07:00

ka620_patch.com

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

ka620.bin

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

ka630_patch.com

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

ka630.bin

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

ka655_patch.com

Notes For V3.8

2011-04-15 08:35:43 -07:00

ka655x.bin

Notes For V3.8

2011-04-15 08:35:43 -07:00

ka655x.bin_old

Notes For V3.8

2011-04-15 08:35:43 -07:00

vax7x0_mba.c

Adding more device help

2013-02-05 04:41:48 -08:00

vax610_defs.h

SHOW IOSPACE, again

2013-07-11 15:39:15 -04:00

vax610_io.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax610_mem.c

Added SHOW CPU MEMORY support for all VAX simulators to display the memory controller and board configuration

2013-04-08 12:18:09 -07:00

vax610_stddev.c

PDP8/PDP11/VAX: Support high speed character input on console and other multiplexer ports instead of limiting input data rate to 1 character per clock tick.

2013-10-23 07:50:39 -07:00

vax610_sysdev.c

Added reporting of the QVSS window focus release key when Video Windows is created

2013-06-13 07:00:32 -07:00

vax610_syslist.c

Add sim_video and VAX QVSS (VCB01) Monochrome Video Board from Matt Burke

2013-06-12 17:10:23 -07:00

vax630_defs.h

VAX630: NVR corrected to be 64 bytes instead of 128. Added NVR read/write debug tracing.

2013-08-21 13:59:22 -07:00

vax630_io.c

VAX630: Added register bitfields for the IPC (Doorbell) register and read/write tracing.

2013-08-21 13:55:35 -07:00

vax630_stddev.c

PDP8/PDP11/VAX: Support high speed character input on console and other multiplexer ports instead of limiting input data rate to 1 character per clock tick.

2013-10-23 07:50:39 -07:00

vax630_sysdev.c

VAX630: Fix watch chip behavior the first time a file is attached to the NVR device.

2013-08-21 14:31:31 -07:00

vax630_syslist.c

VAX630: NVR corrected to be 64 bytes instead of 128. Added NVR read/write debug tracing.

2013-08-21 13:59:22 -07:00

vax730_defs.h

SHOW IOSPACE, again

2013-07-11 15:39:15 -04:00

vax730_mem.c

Added SHOW CPU MEMORY support for all VAX simulators to display the memory controller and board configuration

2013-04-08 12:18:09 -07:00

vax730_rb.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax730_stddev.c

PDP8/PDP11/VAX: Support high speed character input on console and other multiplexer ports instead of limiting input data rate to 1 character per clock tick.

2013-10-23 07:50:39 -07:00

vax730_sys.c

Provide more useful help for VAX simulator boot commands and clearer error reports for boot command errors

2013-01-26 21:12:12 -08:00

vax730_syslist.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax730_uba.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax750_cmi.c

Provide more useful help for VAX simulator boot commands and clearer error reports for boot command errors

2013-01-26 21:12:12 -08:00

vax750_defs.h

SHOW IOSPACE, again

2013-07-11 15:39:15 -04:00

vax750_mem.c

Added SHOW CPU MEMORY support for all VAX simulators to display the memory controller and board configuration

2013-04-08 12:18:09 -07:00

vax750_stddev.c

PDP8/PDP11/VAX: Support high speed character input on console and other multiplexer ports instead of limiting input data rate to 1 character per clock tick.

2013-10-23 07:50:39 -07:00

vax750_syslist.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax750_uba.c

Revised all VAX simulator devices to have proper help information defined to make "HELP dev SHOW" and "HELP dev SET" most useful.

2013-02-02 16:29:38 -08:00

vax780_bug_history.txt

Merge changes from v3.9-0 rc1

2012-03-19 16:05:24 -07:00

vax780_defs.h

SHOW IOSPACE, again

2013-07-11 15:39:15 -04:00

vax780_fload.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax780_mem.c

Added SHOW CPU MEMORY support for all VAX simulators to display the memory controller and board configuration

2013-04-08 12:18:09 -07:00

vax780_sbi.c

Added boot from console floppy support to the VAX780 simulator (Changed console floppy device name from RXC to CS)

2013-04-11 08:45:07 -07:00

vax780_stddev.c

PDP8/PDP11/VAX: Support high speed character input on console and other multiplexer ports instead of limiting input data rate to 1 character per clock tick.

2013-10-23 07:50:39 -07:00

vax780_syslist.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax780_uba.c

Adding more device help

2013-02-05 04:41:48 -08:00

vax860_abus.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax860_defs.h

SHOW IOSPACE, again

2013-07-11 15:39:15 -04:00

vax860_sbia.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax860_stddev.c

PDP8/PDP11/VAX: Support high speed character input on console and other multiplexer ports instead of limiting input data rate to 1 character per clock tick.

2013-10-23 07:50:39 -07:00

vax860_syslist.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax_2681.c

Revised QVSS mouse support from Matt Burke to address #60

2013-08-17 10:11:47 -07:00

vax_2681.h

Add sim_video and VAX QVSS (VCB01) Monochrome Video Board from Matt Burke

2013-06-12 17:10:23 -07:00

vax_cis.c

Migrating scp and library global variables to be declared as extern in the appropriate library include file and remove repetitive declarations in referencing modules.

2013-01-10 13:29:15 -08:00

vax_cmode.c

Migrating scp and library global variables to be declared as extern in the appropriate library include file and remove repetitive declarations in referencing modules.

2013-01-10 13:29:15 -08:00

vax_cpu1.c

Migrating scp and library global variables to be declared as extern in the appropriate library include file and remove repetitive declarations in referencing modules.

2013-01-10 13:29:15 -08:00

vax_cpu.c

VAX: Compiler warning cleanup

2013-09-05 23:30:22 -07:00

vax_defs.h

Changed use of compile #defines which start with a _ character to not do this since defined symbols starting with _ are reserved to local compiler/runtime implementations in the C language. This addresses issue #32

2013-03-12 11:07:58 -07:00

vax_fpa.c

Merge of Bob's simh-v3.9-0-rc3

2012-04-23 11:50:43 -07:00

vax_io.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax_ka610_bin.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_ka620_bin.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_ka630_bin.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_ka655x_bin.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_lk.c

Add sim_video and VAX QVSS (VCB01) Monochrome Video Board from Matt Burke

2013-06-12 17:10:23 -07:00

vax_mmu.c

Cleanup compiler warnings on Solaris and newer OSX clang compilers.

2013-03-13 20:29:03 -07:00

vax_octa.c

Cleanup for warning messages produced by the clang C compiler. Mostly adding parentheses in conditional assignments and clarification parentheses in complex boolean expressions.

2012-04-29 11:59:44 -07:00

vax_stddev.c

PDP8/PDP11/VAX: Support high speed character input on console and other multiplexer ports instead of limiting input data rate to 1 character per clock tick.

2013-10-23 07:50:39 -07:00

vax_sys.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax_syscm.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax_sysdev.c

Fixes for stable operation with SIM_ASYNCH_CLOCKS defined

2013-05-07 11:22:29 -07:00

vax_syslist.c

Returned the pdp11_cr device to the VAX Qbus systems and changed the pdp11_cr device to properly describe itself as a Qbus capable device when CR11 device is being simulated since it is a programmed I/O device and doesn't have bus addressing issues that DMA devices have.

2013-02-04 06:53:10 -08:00

vax_vc.c

QVSS: Fix to get the VSYNC interrupts to be more reasonable. Addresses Issue #88. From Mike Burke

2013-11-06 17:00:36 -08:00

vax_vmb_exe.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_vs.c

Revised QVSS mouse support from Matt Burke to address #60

2013-08-17 10:11:47 -07:00

vax_watch.c

VAX: Compiler warning cleanup

2013-09-05 23:30:22 -07:00

vaxmod_defs.h

SHOW IOSPACE, again

2013-07-11 15:39:15 -04:00

vmb.exe

Make sure that VAX/vmb.exe is included in the git repository

2011-06-01 09:10:13 -07:00