Mark Pizzolato 4d817f1deb VAX: Added support for the DEQNA device on Ultrix 1.x. Henry Bent observed that the deqna driver in this OS counted on older DEQNA firmware which automatically enabled interrupts after a software reset. ...

CPU Idle detection for this OS is now supported and the combination of SET CPU IDLE=ULTRIX-1.X and explicitly using a DEQNA device (SET XQ TYPE=DEQNA) will enable the automatic enabling of device interrupt generation.

2014-07-14 12:29:53 -07:00

..

ka610.bin

Addition of MicroVAX I (VAX610) processor simulator from Matt Burke

2012-10-25 11:58:10 -07:00

ka620_patch.com

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

ka620.bin

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

ka630_patch.com

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

ka630.bin

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

ka655_patch.com

Notes For V3.8

2011-04-15 08:35:43 -07:00

ka655x.bin

Notes For V3.8

2011-04-15 08:35:43 -07:00

ka655x.bin_old

Notes For V3.8

2011-04-15 08:35:43 -07:00

vax7x0_mba.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax610_defs.h

VAX: Fix for unaligned memory reference to IO and Register Space (from Bob Supnik)

2013-12-22 04:10:01 -08:00

vax610_io.c

VAX: Fix for unaligned memory reference to IO and Register Space (from Bob Supnik)

2013-12-22 04:10:01 -08:00

vax610_mem.c

Added SHOW CPU MEMORY support for all VAX simulators to display the memory controller and board configuration

2013-04-08 12:18:09 -07:00

vax610_stddev.c

VAX: Avoid potential VAX simulator hangs when code may poll for console input without being interrupted

2013-11-07 08:02:00 -08:00

vax610_sysdev.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax610_syslist.c

Add sim_video and VAX QVSS (VCB01) Monochrome Video Board from Matt Burke

2013-06-12 17:10:23 -07:00

vax630_defs.h

VAX: Fix for unaligned memory reference to IO and Register Space (from Bob Supnik)

2013-12-22 04:10:01 -08:00

vax630_io.c

Compiler suggested cleanups.

2014-02-14 17:07:45 -08:00

vax630_stddev.c

VAX: Avoid potential VAX simulator hangs when code may poll for console input without being interrupted

2013-11-07 08:02:00 -08:00

vax630_sysdev.c

SCP: Initial merge of old style single line help with hierarchical help

2014-02-01 07:04:44 -08:00

vax630_syslist.c

VAX630: NVR corrected to be 64 bytes instead of 128. Added NVR read/write debug tracing.

2013-08-21 13:59:22 -07:00

vax730_defs.h

VAX730: Fix 3MB memory setting. Found by Brad Parker.

2014-05-22 07:11:45 -07:00

vax730_mem.c

Added SHOW CPU MEMORY support for all VAX simulators to display the memory controller and board configuration

2013-04-08 12:18:09 -07:00

vax730_rb.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax730_stddev.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax730_sys.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax730_syslist.c

PDP10,PDP11,VAX: Addition of inter operable DUP11, DMC11 and KDP11 devices

2013-11-25 07:00:17 -08:00

vax730_uba.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax750_cmi.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax750_defs.h

VAX: Fix for unaligned memory reference to IO and Register Space (from Bob Supnik)

2013-12-22 04:10:01 -08:00

vax750_mem.c

Added SHOW CPU MEMORY support for all VAX simulators to display the memory controller and board configuration

2013-04-08 12:18:09 -07:00

vax750_stddev.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax750_syslist.c

PDP10,PDP11,VAX: Addition of inter operable DUP11, DMC11 and KDP11 devices

2013-11-25 07:00:17 -08:00

vax750_uba.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax780_bug_history.txt

Documentation update from Bob Supnik

2014-06-11 16:39:40 -07:00

vax780_defs.h

VAX: Fix for unaligned memory reference to IO and Register Space (from Bob Supnik)

2013-12-22 04:10:01 -08:00

vax780_fload.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax780_mem.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax780_sbi.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax780_stddev.c

VAX: Avoid potential VAX simulator hangs when code may poll for console input without being interrupted

2013-11-07 08:02:00 -08:00

vax780_syslist.c

PDP10,PDP11,VAX: Addition of inter operable DUP11, DMC11 and KDP11 devices

2013-11-25 07:00:17 -08:00

vax780_uba.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax860_abus.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax860_defs.h

VAX: Fix for unaligned memory reference to IO and Register Space (from Bob Supnik)

2013-12-22 04:10:01 -08:00

vax860_sbia.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax860_stddev.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax860_syslist.c

PDP10,PDP11,VAX: Addition of inter operable DUP11, DMC11 and KDP11 devices

2013-11-25 07:00:17 -08:00

vax_2681.c

Compiler suggested cleanups.

2014-02-14 17:07:45 -08:00

vax_2681.h

Add sim_video and VAX QVSS (VCB01) Monochrome Video Board from Matt Burke

2013-06-12 17:10:23 -07:00

vax_cis.c

Migrating scp and library global variables to be declared as extern in the appropriate library include file and remove repetitive declarations in referencing modules.

2013-01-10 13:29:15 -08:00

vax_cmode.c

Migrating scp and library global variables to be declared as extern in the appropriate library include file and remove repetitive declarations in referencing modules.

2013-01-10 13:29:15 -08:00

vax_cpu1.c

Migrating scp and library global variables to be declared as extern in the appropriate library include file and remove repetitive declarations in referencing modules.

2013-01-10 13:29:15 -08:00

vax_cpu.c

VAX: Added support for the DEQNA device on Ultrix 1.x. Henry Bent observed that the deqna driver in this OS counted on older DEQNA firmware which automatically enabled interrupts after a software reset.

2014-07-14 12:29:53 -07:00

vax_defs.h

VAX: Added support for the DEQNA device on Ultrix 1.x. Henry Bent observed that the deqna driver in this OS counted on older DEQNA firmware which automatically enabled interrupts after a software reset.

2014-07-14 12:29:53 -07:00

vax_fpa.c

Merge of Bob's simh-v3.9-0-rc3

2012-04-23 11:50:43 -07:00

vax_io.c

Compiler suggested cleanups.

2014-02-14 17:07:45 -08:00

vax_ka610_bin.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_ka620_bin.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_ka630_bin.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_ka655x_bin.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_lk.c

SCP: Added generic output routine sim_printf to output to stdout and sim_log (and sim_deb when enabled)

2014-03-28 08:20:05 -07:00

vax_mmu.c

VAX: Fix for unaligned memory reference to IO and Register Space (from Bob Supnik)

2013-12-22 04:10:01 -08:00

vax_octa.c

Cleanup for warning messages produced by the clang C compiler. Mostly adding parentheses in conditional assignments and clarification parentheses in complex boolean expressions.

2012-04-29 11:59:44 -07:00

vax_stddev.c

VAX: Avoid potential VAX simulator hangs when code may poll for console input without being interrupted

2013-11-07 08:02:00 -08:00

vax_sys.c

Remove stray tab characters which crept in over time

2013-06-03 06:29:01 -07:00

vax_syscm.c

Compiler suggested cleanups.

2014-02-14 17:07:45 -08:00

vax_sysdev.c

SCP: Initial merge of old style single line help with hierarchical help

2014-02-01 07:04:44 -08:00

vax_syslist.c

Returned the pdp11_cr device to the VAX Qbus systems and changed the pdp11_cr device to properly describe itself as a Qbus capable device when CR11 device is being simulated since it is a programmed I/O device and doesn't have bus addressing issues that DMA devices have.

2013-02-04 06:53:10 -08:00

vax_vc.c

Compiler suggested cleanups.

2014-02-14 17:07:45 -08:00

vax_vmb_exe.h

Addition of MicroVAX II (VAX630) and rtVAX 1000 (or Industrial VAX 620) processor simulators from Matt Burke

2012-11-09 12:18:15 -08:00

vax_vs.c

Revised QVSS mouse support from Matt Burke to address #60

2013-08-17 10:11:47 -07:00

vax_watch.c

VAX: Compiler warning cleanup

2013-09-05 23:30:22 -07:00

vaxmod_defs.h

VAX: Fix for unaligned memory reference to IO and Register Space (from Bob Supnik)

2013-12-22 04:10:01 -08:00

vmb.exe

Make sure that VAX/vmb.exe is included in the git repository

2011-06-01 09:10:13 -07:00