; $Id: setup_w11a_max.ecmd 1381 2023-03-12 12:16:45Z mueller $
; SPDX-License-Identifier: GPL-3.0-or-later
; Copyright 2023- by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
;
; Setup file for 'maximal' w11a configuration under e11 v7.4 and above
;
; This setup reflects the full w11a system on Nexys or Arty type boards
;   --> 4 MByte, 2 DL11, DZ+LP+PC, RK05+RL02+RP06+TM11, {DEUNA}
;   Note: no DEUNA and Ethernet support yet
;
; Address and vector assignments are done by e11 autoconfig (unless marked *)
; These assignments match the real w11a implementation
;
; 11/70 CPU no FPP, 4 MByte memory
; 1 KW11-L                      177546/100/BR6
; 1 KW11-P                      172540/104/BR6
; 2 DL11                        177560/060/BR4   (cons)
;                               176500/300/BR4 * (2nd)
; 1 DZ11                        160100/310/BR5 *
; 1 LP11                        177514/200/BR4
; 1 PC11                        177550/070/BR4
; 1 RK11 + 8 RK05    drives     177400/220/BR5
; 1 RL11 + 4 RL01/02 drives     174400/160/BR5
; 1 RH70 + 4 RP06    drives     176700/254/BR5
; 1 TM11 + 4 drives             172520/224/BR5
; 0 DEUNA                       174510/120/BR5 *
;
; setup w11 like processor configuration
;   set nouwin to disable UNIBUS window (17000000-17757777) to UNIBUS map
;   set memory to 3840
;   this way e11 behaves like w11 and SimH, which simplifies tcodes
;
set cpu 70
set cpu nouwin
set memory 1024
set cpu nofpp
set idle delay=1
; set ^E as break character (like in SimH)
set break 005
; enable PC value logging (inspect with show pclog)
set pclog on
; set sysid, leading '1' indicates simulator, next '2' e11
set cpu SYSID=0120345
;
; clock options
;
set hz 50
assign kp0:
;
; setup pdp11 console via telnet
;
set tt0: DL11A
log tt0: e11_dl0.log
;
; 2nd DL11 interface
;
set tt1: DL11A  CSR=0176500 VEC=0300 PRIO=4
assign tt1: TELSINGLE: /PORT=5671
log tt1: e11_dl1.log
;
set yza: DZ11 CSR=0160100 VEC=0310 PRIO=5
set TELNETa: PORT=5672
assign yza0-7: TELNETa:
log yza0:  e11_dz0.log
log yza1:  e11_dz1.log
log yza2:  e11_dz2.log
log yza3:  e11_dz3.log
;
; line printer
;
assign lp0: /dev/null
log lp0: e11_lpt.dat
;
; paper tape read/punch
;
mount pr0: NULL:
mount pp0: e11_ptp.dat
;
; disk drives (ensure RK11, dummy mount rk7:)
;
mount dk7: NULL:
;
mount dl3: NULL: /RL02
;
mount db3: NULL: /RP06
;
; tape drives
;
mount mt7: NULL:
;
; ethernet interfaces (none)
;
; sho dev
;