# Note on USB VID and PID

**!! Read this disclaimer carefully. You'll be responsible for**  
**!! any misuse of the defaults provided with the project sources.**

USB drivers identify hardware by means of two 16 bit identifiers

    VID - Vendor ID
    PID - Product ID

In a 'softcoded' USB Controler like the Cypress FX2 each firmware with a
specific functionality should have a unique VID/PID so that drivers can
automatically detect and configure.

The assignment of USB VID/PID is done by usb.org. Unfortunately there is no 
VID range reserved for 'development' or 'internal use', the only official way
to obtain a VID is to buy one from usb.org, see
http://www.usb.org/developers/vendor/

The `usb_jtag` project bought many years ago a small PID range from a re-seller
and used 

    VID=16C0
    PID=06AD

for a project which implemented an Altera UsbBlaster compatible JTAG interface.

The firmware provided with this project provides
- a JTAG interface (via EP1 and EP2)
- data channels (via EP4, EP6 and optionally EP8)
The JTAG part is compatible with the `usb_jtag` implementation and by extension
compatible with the `usbblaster` cable driver provided by `UrJtag`, and can
therefore be operated with the `jtag` command.

However, because the firmware offers additional functionality it should have a
separate VID/PID. Unfortunately it is not longer possible to buy at very modest
cost a PID sub-range, as was done by the `usb_jtag` project bought many years 
ago. 

VOTI, a small dutch company, has bought a VID for it's own developments and
made a small range of PID publicly available as ***free for internal lab use***.
Usage is granted for ***internal lab use only*** by VOTI under the conditions:
- the gadgets in which you use those PIDs do not leave your desk
- you won't complain to VOTI if you get in trouble with duplicate PIDs
  (for instance because someone else did not follow the previous rule).
- See http://www.voti.nl/pids/pidfaq.html for further details.

The retro11 project uses one of these ***free for internal lab use*** PIDs

    VID=16C0
    PID=03EF

from VOTI as default VID/PID.

So keep in mind
- **This is is perfectly fine for plain hobbyist usage**
- **But respect the ownership of VOTI of this VID/PID and do not
  use this VID/PID for other purposes!**