github.com/wfjm.w11
1
0
Fork 0
mirror of https://github.com/wfjm/w11.git synced 2026-01-13 15:37:43 +00:00
Code Issues Releases Wiki Activity
wfjm.w11/rtl/sys_gen/w11a/nexys2/sys_w11a_n2.vhd
wfjm d3cce101a7 SPDX: rtl/*/*.vhd
2019-07-12 19:01:49 +02:00

580 lines
22 KiB
VHDL
Raw Blame History

-- $Id: sys_w11a_n2.vhd 1181 2019-07-08 17:00:50Z mueller $
-- SPDX-License-Identifier: GPL-3.0-or-later
-- Copyright 2010-2019 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
--
------------------------------------------------------------------------------
-- Module Name: sys_w11a_n2 - syn
-- Description: w11a test design for nexys2
--
-- Dependencies: vlib/xlib/dcm_sfs
-- vlib/genlib/clkdivce
-- bplib/bpgen/bp_rs232_2l4l_iob
-- bplib/fx2rlink/rlink_sp1c_fx2
-- w11a/pdp11_sys70
-- ibus/ibdr_maxisys
-- bplib/nxcramlib/nx_cram_memctl_as
-- bplib/fx2rlink/ioleds_sp1c_fx2
-- w11a/pdp11_hio70
-- bplib/bpgen/sn_humanio_rbus
-- vlib/rbus/rb_sres_or_2
--
-- Test bench: tb/tb_sys_w11a_n2
--
-- Target Devices: generic
-- Tool versions: xst 8.2-14.7; ghdl 0.26-0.35
--
-- Synthesized (xst):
-- Date Rev ise Target flop lutl lutm slic t peri
-- 2019-05-19 1150 14.7 131013 xc3s1200e-4 3219 8981 638 5796 ok: +dz11 66%
-- 2019-04-27 1140 14.7 131013 xc3s1200e-4 3087 ???? 588 5515 ok: +*buf 63%
-- 2019-03-02 1116 14.7 131013 xc3s1200e-4 3024 8246 526 5322 ok: +ibtst 61%
-- 2019-01-27 1108 14.7 131013 xc3s1200e-4 2976 8101 510 5201 ok: -iist
-- 2018-10-13 1055 14.7 131013 xc3s1200e-4 3097 8484 510 5471 ok: +dmpcnt
-- 2018-09-15 1045 14.7 131013 xc3s1200e-4 2860 7983 446 5098 ok: +KW11P
-- 2017-04-30 888 14.7 131013 xc3s1200e-4 2806 7865 446 5043 ok: +fx2dbg
-- 2017-03-04 858 14.7 131013 xc3s1200e-4 2740 7713 446 4912 ok: +DEUNA
-- 2017-01-29 846 14.7 131013 xc3s1200e-4 2696 7620 446 4857 ok: +int24
-- 2015-06-21 692 14.7 131013 xc3s1200e-4 2312 6716 414 4192 ok: rhrp fixes
-- 2015-06-04 686 14.7 131013 xc3s1200e-4 2311 6725 414 4198 ok: +TM11
-- 2015-05-14 680 14.7 131013 xc3s1200e-4 2232 6547 414 4083 ok: +RHRP
-- 2015-02-21 649 14.7 131013 xc3s1200e-4 1903 5512 382 3483 ok: +RL11
-- 2014-12-22 619 14.7 131013 xc3s1200e-4 1828 5131 366 3263 ok: +rbmon
-- 2014-12-20 614 14.7 131013 xc3s1200e-4 1714 4896 366 3125 ok: -RL11,rlv4
-- 2014-06-08 561 14.7 131013 xc3s1200e-4 1626 4821 360 3052 ok: +RL11
-- 2014-06-01 558 14.7 131013 xc3s1200e-4 1561 4597 334 2901 ok:
-- 2013-04-20 509 13.3 O76d xc3s1200e-4 1541 4598 334 2889 ok: now + FX2 !
-- 2011-12-18 440 13.1 O40d xc3s1200e-4 1450 4439 270 2740 ok: LP+PC+DL+II
-- 2011-11-18 427 13.1 O40d xc3s1200e-4 1433 4374 242 2680 ok: LP+PC+DL+II
-- 2010-12-30 351 12.1 M53d xc3s1200e-4 1389 4368 242 2674 ok: LP+PC+DL+II
-- 2010-11-06 336 12.1 M53d xc3s1200e-4 1357 4304* 242 2618 ok: LP+PC+DL+II
-- 2010-10-24 335 12.1 M53d xc3s1200e-4 1357 4546 242 2618 ok: LP+PC+DL+II
-- 2010-10-17 333 12.1 M53d xc3s1200e-4 1350 4541 242 2617 ok: LP+PC+DL+II
-- 2010-10-16 332 12.1 M53d xc3s1200e-4 1338 4545 242 2629 ok: LP+PC+DL+II
-- 2010-06-27 310 12.1 M53d xc3s1200e-4 1337 4307 242 2630 ok: LP+PC+DL+II
-- 2010-06-26 309 11.4 L68 xc3s1200e-4 1318 4293 242 2612 ok: LP+PC+DL+II
-- 2010-06-18 306 12.1 M53d xc3s1200e-4 1319 4300 242 2624 ok: LP+PC+DL+II
-- " 306 11.4 L68 xc3s1200e-4 1319 4286 242 2618 ok: LP+PC+DL+II
-- " 306 10.1.02 K39 xc3s1200e-4 1309 4311 242 2665 ok: LP+PC+DL+II
-- " 306 9.2.02 J40 xc3s1200e-4 1316 4259 242 2656 ok: LP+PC+DL+II
-- " 306 9.1 J30 xc3s1200e-4 1311 4260 242 2643 ok: LP+PC+DL+II
-- " 306 8.2.03 I34 xc3s1200e-4 1371 4394 242 2765 ok: LP+PC+DL+II
-- 2010-06-13 305 11.4 L68 xc3s1200e-4 1318 4360 242 2629 ok: LP+PC+DL+II
-- 2010-06-12 304 11.4 L68 xc3s1200e-4 1323 4201 242 2574 ok: LP+PC+DL+II
-- 2010-06-03 300 11.4 L68 xc3s1200e-4 1318 4181 242 2572 ok: LP+PC+DL+II
-- 2010-06-03 299 11.4 L68 xc3s1200e-4 1250 4071 224 2489 ok: LP+PC+DL+II
-- 2010-05-26 296 11.4 L68 xc3s1200e-4 1284 4079 224 2492 ok: LP+PC+DL+II
-- Note: till 2010-10-24 lutm included 'route-thru', after only logic
--
-- Revision History:
-- Date Rev Version Comment
-- 2018-10-13 1055 2.3 use DM_STAT_EXP; IDEC to maxisys; setup PERFEXT
-- 2017-04-30 888 2.2 use SWI(7:6) to allow fx2 debug via LEDs
-- 2016-03-19 748 2.1.1 define rlink SYSID
-- 2015-05-09 677 2.1 start/stop/suspend overhaul; reset overhaul
-- 2015-05-01 672 2.0 use pdp11_sys70 and pdp11_hio70
-- 2015-04-11 666 1.7.2 rearrange XON handling
-- 2015-02-21 649 1.7.1 use ioleds_sp1c,pdp11_(statleds,ledmux,dspmux)
-- 2015-02-15 647 1.7 drop bram and minisys options
-- 2014-12-24 620 1.6.2 relocate ibus window and hio rbus address
-- 2014-12-22 619 1.6.1 add rbus monitor rbd_rbmon
-- 2014-08-28 588 1.6 use new rlink v4 iface generics and 4 bit STAT
-- 2014-08-15 583 1.5 rb_mreq addr now 16 bit
-- 2013-04-20 509 1.4 added fx2 (cuff) support; ATOWIDTH=7
-- 2011-12-23 444 1.3 remove clksys output hack
-- 2011-12-18 440 1.2.7 use rlink_sp1c
-- 2011-11-26 433 1.2.6 use nx_cram_(dummy|memctl_as) now
-- 2011-11-23 432 1.2.5 update O_FLA_CE_N usage
-- 2011-11-19 427 1.2.4 now numeric_std clean
-- 2011-11-17 426 1.2.3 use dcm_sfs now
-- 2011-07-09 391 1.2.2 use now bp_rs232_2l4l_iob
-- 2011-07-08 390 1.2.1 use now sn_humanio
-- 2010-12-30 351 1.2 ported to rbv3
-- 2010-11-27 341 1.1.8 add DCM; new sys_conf consts for mem and clkdiv
-- 2010-11-13 338 1.1.7 add O_CLKSYS (for DCM derived system clock)
-- 2010-11-06 336 1.1.6 rename input pin CLK -> I_CLK50
-- 2010-10-23 335 1.1.5 rename RRI_LAM->RB_LAM;
-- 2010-06-26 309 1.1.4 use constants for rbus addresses (rbaddr_...)
-- BUGFIX: resolve rbus address clash hio<->ibr
-- 2010-06-18 306 1.1.3 change proc_led sensitivity list to avoid xst warn;
-- rename RB_ADDR->RB_ADDR_CORE, add RB_ADDR_IBUS;
-- remove pdp11_ibdr_rri
-- 2010-06-13 305 1.1.2 add CP_ADDR, wire up pdp11_core_rri->pdp11_core
-- 2010-06-12 304 1.1.1 re-do LED driver logic (show cpu modes or cpurust)
-- 2010-06-11 303 1.1 use IB_MREQ.racc instead of RRI_REQ
-- 2010-06-03 300 1.0.2 use default FAWIDTH for rri_core_serport
-- use s3_humanio_rri
-- 2010-05-30 297 1.0.1 put MEM_ACT_(R|W) on LED 6,7
-- 2010-05-28 295 1.0 Initial version (derived from sys_w11a_s3)
------------------------------------------------------------------------------
--
-- w11a test design for nexys2
-- w11a + rlink + serport + cuff
--
-- Usage of Nexys 2 Switches, Buttons, LEDs:
--
-- SWI(7:6): select LED display mode
-- 0x w11 sys70 LED display (further controlled by SWI(3))
-- 10 FX2 debug: fx2 fifo states
-- 11 FX2 debug: fx2 fsm states
-- (5:4): select DSP
-- 00 abclkdiv & abclkdiv_f
-- 01 PC
-- 10 DISPREG
-- 11 DR emulation
-- (3): select LED display
-- 0 overall status
-- 1 DR emulation
-- (2) 0 -> int/ext RS242 port for rlink
-- 1 -> use USB interface for rlink
-- (1): 1 enable XON
-- (0): 0 -> main board RS232 port
-- 1 -> Pmod B/top RS232 port
--
-- LEDs if SWI(7) = 0 and SWI(3) = 1
-- (7:0) DR emulation; shows R0(lower 8 bits) during wait like 11/45+70
--
-- LEDs if SWI(7) = 0 and SWI(3) = 0
-- (7) MEM_ACT_W
-- (6) MEM_ACT_R
-- (5) cmdbusy (all rlink access, mostly rdma)
-- (4:0) if cpugo=1 show cpu mode activity
-- (4) kernel mode, pri>0
-- (3) kernel mode, pri=0
-- (2) kernel mode, wait
-- (1) supervisor mode
-- (0) user mode
-- if cpugo=0 shows cpurust
-- (4) '1'
-- (3:0) cpurust code
--
-- LEDs if SWI(7) = 1
-- (7) fifo_ep4
-- (6) fifo_ep6
-- (5) fsm_rx
-- (4) fsm_tx
-- LEDs if SWI(7) = 1 and SWI(6) = 0
-- (3) flag_ep4_empty
-- (2) flag_ep4_almost
-- (1) flag_ep6_full
-- (0) flag_ep6_almost
-- LEDs if SWI(7) = 1 and SWI(6) = 1
-- (3) fsm_idle
-- (2) fsm_prep
-- (1) fsm_disp
-- (0) fsm_pipe
--
-- DP(3:0) shows IO activity
-- if SWI(2)=0 (serport)
-- (3): not SER_MONI.txok (shows tx back pressure)
-- (2): SER_MONI.txact (shows tx activity)
-- (1): not SER_MONI.rxok (shows rx back pressure)
-- (0): SER_MONI.rxact (shows rx activity)
-- if SWI(2)=1 (fx2-usb)
-- (3): RB_SRES.busy (shows rbus back pressure)
-- (2): RLB_TXBUSY (shows tx back pressure)
-- (1): RLB_TXENA (shows tx activity)
-- (0): RLB_RXVAL (shows rx activity)
--
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use work.slvtypes.all;
use work.xlib.all;
use work.genlib.all;
use work.serportlib.all;
use work.rblib.all;
use work.rlinklib.all;
use work.fx2lib.all;
use work.fx2rlinklib.all;
use work.bpgenlib.all;
use work.bpgenrbuslib.all;
use work.nxcramlib.all;
use work.iblib.all;
use work.ibdlib.all;
use work.pdp11.all;
use work.sys_conf.all;
-- ----------------------------------------------------------------------------
entity sys_w11a_n2 is -- top level
-- implements nexys2_fusp_cuff_aif
port (
I_CLK50 : in slbit; -- 50 MHz clock
I_RXD : in slbit; -- receive data (board view)
O_TXD : out slbit; -- transmit data (board view)
I_SWI : in slv8; -- n2 switches
I_BTN : in slv4; -- n2 buttons
O_LED : out slv8; -- n2 leds
O_ANO_N : out slv4; -- 7 segment disp: anodes (act.low)
O_SEG_N : out slv8; -- 7 segment disp: segments (act.low)
O_MEM_CE_N : out slbit; -- cram: chip enable (act.low)
O_MEM_BE_N : out slv2; -- cram: byte enables (act.low)
O_MEM_WE_N : out slbit; -- cram: write enable (act.low)
O_MEM_OE_N : out slbit; -- cram: output enable (act.low)
O_MEM_ADV_N : out slbit; -- cram: address valid (act.low)
O_MEM_CLK : out slbit; -- cram: clock
O_MEM_CRE : out slbit; -- cram: command register enable
I_MEM_WAIT : in slbit; -- cram: mem wait
O_MEM_ADDR : out slv23; -- cram: address lines
IO_MEM_DATA : inout slv16; -- cram: data lines
O_FLA_CE_N : out slbit; -- flash ce.. (act.low)
O_FUSP_RTS_N : out slbit; -- fusp: rs232 rts_n
I_FUSP_CTS_N : in slbit; -- fusp: rs232 cts_n
I_FUSP_RXD : in slbit; -- fusp: rs232 rx
O_FUSP_TXD : out slbit; -- fusp: rs232 tx
I_FX2_IFCLK : in slbit; -- fx2: interface clock
O_FX2_FIFO : out slv2; -- fx2: fifo address
I_FX2_FLAG : in slv4; -- fx2: fifo flags
O_FX2_SLRD_N : out slbit; -- fx2: read enable (act.low)
O_FX2_SLWR_N : out slbit; -- fx2: write enable (act.low)
O_FX2_SLOE_N : out slbit; -- fx2: output enable (act.low)
O_FX2_PKTEND_N : out slbit; -- fx2: packet end (act.low)
IO_FX2_DATA : inout slv8 -- fx2: data lines
);
end sys_w11a_n2;
architecture syn of sys_w11a_n2 is
signal CLK : slbit := '0';
signal RESET : slbit := '0';
signal CE_USEC : slbit := '0';
signal CE_MSEC : slbit := '0';
signal RXD : slbit := '1';
signal TXD : slbit := '0';
signal RTS_N : slbit := '0';
signal CTS_N : slbit := '0';
signal RB_MREQ : rb_mreq_type := rb_mreq_init;
signal RB_SRES : rb_sres_type := rb_sres_init;
signal RB_SRES_CPU : rb_sres_type := rb_sres_init;
signal RB_SRES_HIO : rb_sres_type := rb_sres_init;
signal RB_LAM : slv16 := (others=>'0');
signal RB_STAT : slv4 := (others=>'0');
signal RLB_MONI : rlb_moni_type := rlb_moni_init;
signal SER_MONI : serport_moni_type := serport_moni_init;
signal FX2_MONI : fx2ctl_moni_type := fx2ctl_moni_init;
signal LED70 : slv8 := (others=>'0');
signal SWI : slv8 := (others=>'0');
signal BTN : slv4 := (others=>'0');
signal LED : slv8 := (others=>'0');
signal DSP_DAT : slv16 := (others=>'0');
signal DSP_DP : slv4 := (others=>'0');
signal GRESET : slbit := '0'; -- general reset (from rbus)
signal CRESET : slbit := '0'; -- cpu reset (from cp)
signal BRESET : slbit := '0'; -- bus reset (from cp or cpu)
signal PERFEXT : slv8 := (others=>'0');
signal EI_PRI : slv3 := (others=>'0');
signal EI_VECT : slv9_2 := (others=>'0');
signal EI_ACKM : slbit := '0';
signal CP_STAT : cp_stat_type := cp_stat_init;
signal DM_STAT_EXP : dm_stat_exp_type := dm_stat_exp_init;
signal MEM_REQ : slbit := '0';
signal MEM_WE : slbit := '0';
signal MEM_BUSY : slbit := '0';
signal MEM_ACK_R : slbit := '0';
signal MEM_ACT_R : slbit := '0';
signal MEM_ACT_W : slbit := '0';
signal MEM_ADDR : slv20 := (others=>'0');
signal MEM_BE : slv4 := (others=>'0');
signal MEM_DI : slv32 := (others=>'0');
signal MEM_DO : slv32 := (others=>'0');
signal MEM_ADDR_EXT : slv22 := (others=>'0');
signal IB_MREQ : ib_mreq_type := ib_mreq_init;
signal IB_SRES_IBDR : ib_sres_type := ib_sres_init;
signal DISPREG : slv16 := (others=>'0');
signal ABCLKDIV : slv16 := (others=>'0');
constant rbaddr_rbmon : slv16 := x"ffe8"; -- ffe8/0008: 1111 1111 1110 1xxx
constant rbaddr_hio : slv16 := x"fef0"; -- fef0/0008: 1111 1110 1111 0xxx
constant sysid_proj : slv16 := x"0201"; -- w11a
constant sysid_board : slv8 := x"02"; -- nexys2
constant sysid_vers : slv8 := x"00";
begin
assert (sys_conf_clksys mod 1000000) = 0
report "assert sys_conf_clksys on MHz grid"
severity failure;
DCM : dcm_sfs -- clock generator -------------------
generic map (
CLKFX_DIVIDE => sys_conf_clkfx_divide,
CLKFX_MULTIPLY => sys_conf_clkfx_multiply,
CLKIN_PERIOD => 20.0)
port map (
CLKIN => I_CLK50,
CLKFX => CLK,
LOCKED => open
);
CLKDIV : clkdivce -- usec/msec clock divider -----------
generic map (
CDUWIDTH => 6,
USECDIV => sys_conf_clksys_mhz,
MSECDIV => 1000)
port map (
CLK => CLK,
CE_USEC => CE_USEC,
CE_MSEC => CE_MSEC
);
IOB_RS232 : bp_rs232_2l4l_iob -- serport iob/switch ----------------
port map (
CLK => CLK,
RESET => '0',
SEL => SWI(0),
RXD => RXD,
TXD => TXD,
CTS_N => CTS_N,
RTS_N => RTS_N,
I_RXD0 => I_RXD,
O_TXD0 => O_TXD,
I_RXD1 => I_FUSP_RXD,
O_TXD1 => O_FUSP_TXD,
I_CTS1_N => I_FUSP_CTS_N,
O_RTS1_N => O_FUSP_RTS_N
);
RLINK : rlink_sp1c_fx2 -- rlink for serport + fx2 -----------
generic map (
BTOWIDTH => 7, -- 128 cycles access timeout
RTAWIDTH => 12,
SYSID => sysid_proj & sysid_board & sysid_vers,
IFAWIDTH => 5, -- 32 word input fifo
OFAWIDTH => 5, -- 32 word output fifo
PETOWIDTH => sys_conf_fx2_petowidth,
CCWIDTH => sys_conf_fx2_ccwidth,
ENAPIN_RLMON => sbcntl_sbf_rlmon,
ENAPIN_RBMON => sbcntl_sbf_rbmon,
CDWIDTH => 13,
CDINIT => sys_conf_ser2rri_cdinit,
RBMON_AWIDTH => sys_conf_rbmon_awidth,
RBMON_RBADDR => rbaddr_rbmon)
port map (
CLK => CLK,
CE_USEC => CE_USEC,
CE_MSEC => CE_MSEC,
CE_INT => CE_MSEC,
RESET => RESET,
ENAXON => SWI(1),
ENAFX2 => SWI(2),
RXSD => RXD,
TXSD => TXD,
CTS_N => CTS_N,
RTS_N => RTS_N,
RB_MREQ => RB_MREQ,
RB_SRES => RB_SRES,
RB_LAM => RB_LAM,
RB_STAT => RB_STAT,
RL_MONI => open,
RLB_MONI => RLB_MONI,
SER_MONI => SER_MONI,
FX2_MONI => FX2_MONI,
I_FX2_IFCLK => I_FX2_IFCLK,
O_FX2_FIFO => O_FX2_FIFO,
I_FX2_FLAG => I_FX2_FLAG,
O_FX2_SLRD_N => O_FX2_SLRD_N,
O_FX2_SLWR_N => O_FX2_SLWR_N,
O_FX2_SLOE_N => O_FX2_SLOE_N,
O_FX2_PKTEND_N => O_FX2_PKTEND_N,
IO_FX2_DATA => IO_FX2_DATA
);
PERFEXT(0) <= '0'; -- unused (ext_rdrhit)
PERFEXT(1) <= '0'; -- unused (ext_wrrhit)
PERFEXT(2) <= '0'; -- unused (ext_wrflush)
PERFEXT(3) <= RLB_MONI.rxval and not RLB_MONI.rxhold; -- ext_rlrxact
PERFEXT(4) <= RLB_MONI.rxhold; -- ext_rlrxback
PERFEXT(5) <= RLB_MONI.txena and not RLB_MONI.txbusy; -- ext_rltxact
PERFEXT(6) <= RLB_MONI.txbusy; -- ext_rltxback
PERFEXT(7) <= CE_USEC; -- ext_usec
SYS70 : pdp11_sys70 -- 1 cpu system ----------------------
port map (
CLK => CLK,
RESET => RESET,
RB_MREQ => RB_MREQ,
RB_SRES => RB_SRES_CPU,
RB_STAT => RB_STAT,
RB_LAM_CPU => RB_LAM(0),
GRESET => GRESET,
CRESET => CRESET,
BRESET => BRESET,
CP_STAT => CP_STAT,
EI_PRI => EI_PRI,
EI_VECT => EI_VECT,
EI_ACKM => EI_ACKM,
PERFEXT => PERFEXT,
IB_MREQ => IB_MREQ,
IB_SRES => IB_SRES_IBDR,
MEM_REQ => MEM_REQ,
MEM_WE => MEM_WE,
MEM_BUSY => MEM_BUSY,
MEM_ACK_R => MEM_ACK_R,
MEM_ADDR => MEM_ADDR,
MEM_BE => MEM_BE,
MEM_DI => MEM_DI,
MEM_DO => MEM_DO,
DM_STAT_EXP => DM_STAT_EXP
);
IBDR_SYS : ibdr_maxisys -- IO system -------------------------
port map (
CLK => CLK,
CE_USEC => CE_USEC,
CE_MSEC => CE_MSEC,
RESET => GRESET,
BRESET => BRESET,
ITIMER => DM_STAT_EXP.se_itimer,
IDEC => DM_STAT_EXP.se_idec,
CPUSUSP => CP_STAT.cpususp,
RB_LAM => RB_LAM(15 downto 1),
IB_MREQ => IB_MREQ,
IB_SRES => IB_SRES_IBDR,
EI_ACKM => EI_ACKM,
EI_PRI => EI_PRI,
EI_VECT => EI_VECT,
DISPREG => DISPREG
);
MEM_ADDR_EXT <= "00" & MEM_ADDR; -- just use lower 4 MB (of 16 MB)
CRAMCTL: nx_cram_memctl_as -- memory controller -----------------
generic map (
READ0DELAY => sys_conf_memctl_read0delay,
READ1DELAY => sys_conf_memctl_read1delay,
WRITEDELAY => sys_conf_memctl_writedelay)
port map (
CLK => CLK,
RESET => GRESET,
REQ => MEM_REQ,
WE => MEM_WE,
BUSY => MEM_BUSY,
ACK_R => MEM_ACK_R,
ACK_W => open,
ACT_R => MEM_ACT_R,
ACT_W => MEM_ACT_W,
ADDR => MEM_ADDR_EXT,
BE => MEM_BE,
DI => MEM_DI,
DO => MEM_DO,
O_MEM_CE_N => O_MEM_CE_N,
O_MEM_BE_N => O_MEM_BE_N,
O_MEM_WE_N => O_MEM_WE_N,
O_MEM_OE_N => O_MEM_OE_N,
O_MEM_ADV_N => O_MEM_ADV_N,
O_MEM_CLK => O_MEM_CLK,
O_MEM_CRE => O_MEM_CRE,
I_MEM_WAIT => I_MEM_WAIT,
O_MEM_ADDR => O_MEM_ADDR,
IO_MEM_DATA => IO_MEM_DATA
);
O_FLA_CE_N <= '1'; -- keep Flash memory disabled
LED_IO : ioleds_sp1c_fx2 -- hio leds from serport or fx2 ------
port map (
CLK => CLK,
CE_USEC => CE_USEC,
RESET => GRESET,
ENAFX2 => SWI(2),
RB_SRES => RB_SRES,
RLB_MONI => RLB_MONI,
SER_MONI => SER_MONI,
IOLEDS => DSP_DP
);
ABCLKDIV <= SER_MONI.abclkdiv(11 downto 0) & '0' & SER_MONI.abclkdiv_f;
HIO70 : pdp11_hio70 -- hio from sys70 --------------------
generic map (
LWIDTH => LED'length,
DCWIDTH => 2)
port map (
SEL_LED => SWI(3),
SEL_DSP => SWI(5 downto 4),
MEM_ACT_R => MEM_ACT_R,
MEM_ACT_W => MEM_ACT_W,
CP_STAT => CP_STAT,
DM_STAT_EXP => DM_STAT_EXP,
ABCLKDIV => ABCLKDIV,
DISPREG => DISPREG,
LED => LED70,
DSP_DAT => DSP_DAT
);
proc_fx2leds: process (SWI, LED70, FX2_MONI) -- hio LED handler ------------
variable iled : slv8 := (others=>'0');
begin
iled := (others=>'0');
if SWI(7) = '0' then
iled := LED70;
else
iled(7) := FX2_MONI.fifo_ep4;
iled(6) := FX2_MONI.fifo_ep6;
iled(5) := FX2_MONI.fsm_rx;
iled(4) := FX2_MONI.fsm_tx;
if SWI(6) = '0' then
iled(3) := FX2_MONI.flag_ep4_empty;
iled(2) := FX2_MONI.flag_ep4_almost;
iled(1) := FX2_MONI.flag_ep6_full;
iled(0) := FX2_MONI.flag_ep6_almost;
else
iled(3) := FX2_MONI.fsm_idle;
iled(2) := FX2_MONI.fsm_prep;
iled(1) := FX2_MONI.fsm_disp;
iled(0) := FX2_MONI.fsm_pipe;
end if;
end if;
LED <= iled;
end process proc_fx2leds;
HIO : sn_humanio_rbus -- hio manager -----------------------
generic map (
DEBOUNCE => sys_conf_hio_debounce,
RB_ADDR => rbaddr_hio)
port map (
CLK => CLK,
RESET => RESET,
CE_MSEC => CE_MSEC,
RB_MREQ => RB_MREQ,
RB_SRES => RB_SRES_HIO,
SWI => SWI,
BTN => BTN,
LED => LED,
DSP_DAT => DSP_DAT,
DSP_DP => DSP_DP,
I_SWI => I_SWI,
I_BTN => I_BTN,
O_LED => O_LED,
O_ANO_N => O_ANO_N,
O_SEG_N => O_SEG_N
);
RB_SRES_OR : rb_sres_or_2 -- rbus or ---------------------------
port map (
RB_SRES_1 => RB_SRES_CPU,
RB_SRES_2 => RB_SRES_HIO,
RB_SRES_OR => RB_SRES
);
end syn;
Reference in New Issue View Git Blame Copy Permalink