Document state of Debian package 3.9-6

.hgignore

@@ -1,4 +0,0 @@
-(^|/)CVS($|/)
-(^|/)\.hg($|/)
-(^|/)\.hgtags($|/)
-ChangeLog

Makefile

@@ -12,9 +12,8 @@
 #
 #  Only used to build distribution tarballs.
 #
-TMP        ?= /tmp
 DIST_PREFIX = ${TMP}
-VERSION     = 4.1
+VERSION     = 3.9
 BASE        = xen-tools
 
 
@@ -57,7 +56,7 @@ clean:
 	@find . -name '*.tmp' -exec rm \{\} \;
 	@find . -name 'tags' -exec rm \{\} \;
 	@find . -name '*.8.gz' -exec rm \{\} \;
-	@if [ -d man ]; then rm -rf man ; fi
+	@find man -name '*.html' -exec rm \{\} \;
 	@if [ -e build-stamp ]; then rm -f build-stamp ; fi
 	@if [ -e configure-stamp ]; then rm -f configure-stamp ; fi
 	@if [ -d debian/xen-tools ]; then rm -rf ./debian/xen-tools; fi
@@ -159,8 +158,6 @@ install-hooks:
 	cp -R hooks/edgy/*-* ${prefix}/usr/lib/xen-tools/edgy.d/
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d feisty.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d gutsy.d
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d hardy.d
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d intrepid.d
 	mkdir -p ${prefix}/usr/lib/xen-tools/dapper.d/
 	cp -R hooks/dapper/*-* ${prefix}/usr/lib/xen-tools/dapper.d/
 	mkdir -p ${prefix}/usr/lib/xen-tools/edgy.d/
@@ -196,7 +193,6 @@ install: fixup-perms install-bin install-etc install-hooks install-libraries ins
 #  Build our manpages via the `pod2man` command.
 #
 manpages:
-	mkdir man
 	cd bin; for i in *-*; do pod2man --release=${VERSION} --official --section=8 $$i ../man/$$i.8; done
 	for i in man/*.8; do gzip --force -9 $$i; done
 
@@ -239,7 +235,7 @@ tidy:
 	if [ -x /usr/bin/perltidy ]; then \
 	for i in bin/*-*; do \
 		echo "tidying $$i"; \
-		perltidy  $$i \
+		perltidy -b -nt -bt=2 -sbt=1 -bl  -mbl=3 -sbl -bbs -bbb -anl  -lp $$i \
 	; done \
 	; fi
 

bin/xen-create-image

@@ -73,8 +73,6 @@ xen-create-image - Easily create new Xen instances with networking and OpenSSH.
 
    --hooks       Specify whether to run hooks after the image is created.
 
-   --no-hosts    Don't touch /etc/hosts on the dom0.
-
    --partitions  Use a specific partition layout configuration file.
                 Not supported with the image-dev and swap-dev options.
                 Parameters fs, size, swap and noswap are ignored when
@@ -663,7 +661,7 @@ my $FAIL = 0;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '3.9';
 
 
 
@@ -1338,7 +1336,7 @@ sub parseCommandLineArguments
     #
     #  Parse options.
     #
-    if ( !GetOptions(
+    GetOptions(
 
         # Mandatory
         "dist=s", \$CONFIG{'dist'},
@@ -1361,18 +1359,14 @@ sub parseCommandLineArguments
         "image-dev=s", \$install{'image-dev'},
         "swap-dev=s",  \$install{'swap-dev'},
 
-        # Host options
-        "no-hosts",    \$CONFIG{'nohosts'},
-
         # Networking options
-        "dhcp",        \$CONFIG{'dhcp'},
+        "dhcp!",       \$CONFIG{'dhcp'},
         "gateway=s",   \$CONFIG{'gateway'},
         "hostname=s",  \$CONFIG{'hostname'},
         "ip=s@",       \$CONFIG{'ip'},
         "mac=s",       \$CONFIG{'mac'},
         "netmask=s",   \$CONFIG{'netmask'},
         "broadcast=s", \$CONFIG{'broadcast'},
-        "vifname=s",   \$CONFIG{'vifname'},
         "p2p=s",       \$CONFIG{'p2p'},
 
         # Exclusive
@@ -1383,38 +1377,34 @@ sub parseCommandLineArguments
         "install-source=s", \$CONFIG{'install-source'},
 
         # Misc. options
-        "accounts",     \$CONFIG{'accounts'},
+        "accounts!",    \$CONFIG{'accounts'},
         "admins=s",     \$CONFIG{'admins'},
         "arch=s",       \$CONFIG{'arch'},
         "fs=s",         \$CONFIG{'fs'},
-        "boot",         \$CONFIG{'boot'},
+        "boot!",        \$CONFIG{'boot'},
         "cache=s",      \$CONFIG{'cache'},
         "config=s",     \$CONFIG{'config'},
-        "ide",          \$CONFIG{'ide'},
+        "ide!",         \$CONFIG{'ide'},
         "install=i",    \$CONFIG{'install'},
         "hooks=i",      \$CONFIG{'hooks'},
-        "pygrub",       \$CONFIG{'pygrub'},
+        "passwd!",      \$CONFIG{'passwd'},
-        "passwd",       \$CONFIG{'passwd'},
         "partitions=s", \$CONFIG{'partitions'},
         "role=s",       \$CONFIG{'role'},
         "role-args=s",  \$CONFIG{'role-args'},
         "roledir=s",    \$CONFIG{'roledir'},
-        "force",        \$CONFIG{'force'},
+        "force!",       \$CONFIG{'force'},
-        "keep",         \$CONFIG{'keep'},
+        "keep!",        \$CONFIG{'keep'},
         "template=s",   \$CONFIG{'template'},
         "output=s",     \$CONFIG{'output'},
         "extension=s",  \$CONFIG{'extension'},
 
         # Help options
-        "debug",   \$CONFIG{'debug'},
+        "debug!",  \$CONFIG{'debug'},
         "help",    \$HELP,
         "manual",  \$MANUAL,
         "verbose", \$CONFIG{'verbose'},
         "version", \$VERSION
-    ) )
+    );
-    {
-        exit;
-    }
 
     pod2usage(1) if $HELP;
     pod2usage( -verbose => 2 ) if $MANUAL;
@@ -1819,17 +1809,9 @@ EOF
       $CONFIG{'output'} . "/" . $CONFIG{'hostname'} . $CONFIG{'extension'};
     if ( -e $cfg )
     {
-        if ( $CONFIG{'force'} )
+        print "Configuration file already exists; $cfg\n";
-        {
+        print "Aborting\n";
-            $CONFIG{'verbose'} && print "Removing existing file: $cfg\n";
+        exit 127;
-            unlink( $cfg );
-        }
-        else
-        {
-            print "Configuration file already exists; $cfg\n";
-            print "Aborting\n";
-            exit 127;
-        }
     }
 
 }
@@ -2273,7 +2255,6 @@ sub showSummary
     logprint("Partitions     :  ");
     foreach my $partition (@PARTITIONS)
     {
-        next if ( !$partition );
         $info = sprintf( '%-15s %-5s (%s)',
                          ( $partition->{'type'} ne 'swap' )
                          ? $partition->{'mountpoint'}

bin/xen-create-nfs

@@ -130,7 +130,7 @@ $CONFIG{'template'} = '/etc/xen-tools/xm-nfs.tmpl';
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '3.9';
 
 
 # store version number away.

bin/xen-delete-image

@@ -169,7 +169,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '3.9';
 
 
 

bin/xen-list-images

@@ -102,7 +102,7 @@ $CONFIG{'prefix'} = "/etc/xen";
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '3.9';
 
 
 

bin/xen-resize-guest

@@ -116,7 +116,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '3.9';
 
 
 

bin/xen-update-image

@@ -120,7 +120,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '3.9';
 
 
 #

bin/xt-create-xen-config

@@ -156,7 +156,7 @@ $CONFIG{'template'} = '/etc/xen-tools/xm.tmpl';
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '3.9';
 
 
 

bin/xt-customize-image

@@ -97,7 +97,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '3.9';
 
 
 

bin/xt-install-image

@@ -113,7 +113,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '3.9';
 
 
 #

debian/changelog

@@ -1,14 +1,3 @@
-xen-tools (4.1-1) unstable; urgency=low
-
-  - New command line argument '--no-hosts' to avoid touching /etc/hosts
-    on dom0
-  - New command line argument '--pygrub' to setup a guest for pygrub use.
-  - Generated configuration file should work for --image-dev + --swap-dev
-    again.
-  - Always use /dev/pts for new images.
-
- -- Steve Kemp <skx@debian.org>  Sun, 23 Nov 2008 13:06:01 +0000
-
 xen-tools (3.9-6) unstable; urgency=low
 
   - Allow command line flags to be unset.

etc/xm.tmpl

@@ -6,76 +6,37 @@
 #
 #  Kernel + memory size
 #
-{ if ( ( $kernel ) && ( !defined($pygrub)) )
+{ if ( $kernel )
   {
     $OUT.= "kernel      = '$kernel'";
   }
 }
-{ if ( ( $initrd ) && ( !defined($pygrub)) )
+{ if ( $initrd )
   {
     $OUT.= "ramdisk     = '$initrd'";
   }
 }
-{
-  if ( $pygrub )
-  {
-    $OUT .= "bootloader = '/usr/bin/pygrub'\n";
-  }
-}
 memory      = '{$memory}'
 
 #
 #  Disk device(s).
 #
-{
+{ 
-  if ( !defined($image_vbd ) )
+  for ( my $i = 0; $i <= $#PARTITIONS; $i++ )
   {
-    for ( my $i = $#PARTITIONS; $i >= 0 ; $i-- )
-    {
       if ( $PARTITIONS[$i]{'mountpoint'} eq '/' )
       {
           $OUT .= "root        = '/dev/$device" . ($i + 1) . " ro'\n";
       }
-    }
-    $OUT .= "disk        = [\n";
-    for ( my $i = $#PARTITIONS; $i >= 0 ; $i-- )
-    {
-      $OUT .= "                  '$PARTITIONS[$i]{'imagetype'}$PARTITIONS[$i]{'image'},$device" . ( $i + 1 ) .",w',\n";
-    }
-    $OUT .= "              ]\n";
   }
+  $OUT .= "disk        = [\n";
+  for ( my $i = 0; $i <= $#PARTITIONS; $i++ )
+  {
+      $OUT .= "                  '$PARTITIONS[$i]{'imagetype'}$PARTITIONS[$i]{'image'},$device" . ( $i + 1 ) .",w',\n";
+  }
+  $OUT .= "              ]\n";
 }
 
-#
-#  Physical volumes
-#
-{
-    if ( ( $swap_vbd ) && ( $image_vbd ) )
-    {
-    $OUT .= "root  = '/dev/$device" . "2 ro'\n";
-
-    $OUT .= "disk  = [ ";
-
-    if ( $image_vbd )
-    {
-         $OUT .= "'$image_vbd," . $device . "2,w'";
-
-    }
-
-    if ( $swap_vbd )
-    {
-         if ( $image_vbd )
-         {
-            $OUT .= ",";
-         }
-
-         $OUT .= "'$swap_vbd," . $device . "1,w'";
-    }
-    $OUT .= " ]\n";
-    }
-}
-
-
 #
 #  Hostname
 #
@@ -91,12 +52,12 @@ name        = '{$hostname}'
     # Setup the mac address, if present.
     my $m = '';
     if ( $mac )
-    {
+    { 
       $m = "mac=$mac"
     }
 
     $OUT .= "vif         = [ '$m' ]";
-  }
+  }    
   else
   {
     #
@@ -104,20 +65,12 @@ name        = '{$hostname}'
     #
     my $m = '';
     if ( $mac )
-    {
+    { 
       $m = ",mac=$mac"
     }
 
-    my $vn = '';
+    $OUT .= "vif         = [ 'ip=$ip1"; 
-    if ( $vifname )
+    $OUT .= "$m' ]";
-    {
-      $vn = ",vifname=$vifname";
-    }
-
-    $OUT .= "vif         = [ 'ip=$ip1";
-    $OUT .= "$m";
-    $OUT .= "$vn";
-    $OUT .= "' ]";
   }
 }
 

hooks/centos-4/50-setup-hostname

@@ -89,27 +89,23 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        if [ -z "${nohosts}" ]; then
+        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
 
+        #
+        #  If we've updated the /etc/hosts file on the host machine
+        # and there is an installation of dnsmasq installed then
+        # reload it.
+        #
+        #  This will let the local LAN clients lookup the new address.
+        #
+        if [ -x /usr/sbin/dnsmasq ] ; then
+            if [ -e /var/run/dnsmasq.pid ]; then
 
-            #
+                logMessage Allowing DNSMasq to restart.
-            #  If we've updated the /etc/hosts file on the host machine
+                kill -HUP `cat /var/run/dnsmasq.pid`
-            # and there is an installation of dnsmasq installed then
-            # reload it.
-            #
-            #  This will let the local LAN clients lookup the new address.
-            #
-            if [ -x /usr/sbin/dnsmasq ] ; then
-                if [ -e /var/run/dnsmasq.pid ]; then
-
-                    logMessage Allowing DNSMasq to restart.
-                    kill -HUP `cat /var/run/dnsmasq.pid`
-                fi
             fi
         fi
     fi

hooks/centos-4/90-make-fstab

@@ -64,7 +64,6 @@ cat <<E_O_FSTAB > ${prefix}/etc/fstab
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
-devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -76,7 +75,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-
+    
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -85,7 +84,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
             has_reiserfs=1
             ;;
     esac
-
+    
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else

hooks/centos-5/50-setup-hostname

@@ -89,24 +89,22 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        if [ -z "${nohosts}" ]; then
+        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
-           #
+        #
-           #  If we've updated the /etc/hosts file on the host machine
+        #  If we've updated the /etc/hosts file on the host machine
-           # and there is an installation of dnsmasq installed then
+        # and there is an installation of dnsmasq installed then
-           # reload it.
+        # reload it.
-           #
+        #
-           #  This will let the local LAN clients lookup the new address.
+        #  This will let the local LAN clients lookup the new address.
-           #
+        #
-            if [ -x /usr/sbin/dnsmasq ] ; then
+        if [ -x /usr/sbin/dnsmasq ] ; then
-                if [ -e /var/run/dnsmasq.pid ]; then
+            if [ -e /var/run/dnsmasq.pid ]; then
 
-                    logMessage Allowing DNSMasq to restart.
+                logMessage Allowing DNSMasq to restart.
-                    kill -HUP `cat /var/run/dnsmasq.pid`
+                kill -HUP `cat /var/run/dnsmasq.pid`
-                fi
             fi
         fi
     fi

hooks/dapper/50-setup-hostname

@@ -89,25 +89,24 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        if [ -z "${nohosts}" ]; then
+        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
 
-            #
+        #
-            #  If we've updated the /etc/hosts file on the host machine
+        #  If we've updated the /etc/hosts file on the host machine
-            # and there is an installation of dnsmasq installed then
+        # and there is an installation of dnsmasq installed then
-            # reload it.
+        # reload it.
-            #
+        #
-            #  This will let the local LAN clients lookup the new address.
+        #  This will let the local LAN clients lookup the new address.
-             #
+        #
-            if [ -x /usr/sbin/dnsmasq ] ; then
+        if [ -x /usr/sbin/dnsmasq ] ; then
-                if [ -e /var/run/dnsmasq.pid ]; then
+            if [ -e /var/run/dnsmasq.pid ]; then
 
                 logMessage Allowing DNSMasq to restart.
+
                 kill -HUP `cat /var/run/dnsmasq.pid`
-                fi
             fi
         fi
     fi

hooks/dapper/90-make-fstab

@@ -61,7 +61,6 @@ cat <<E_O_FSTAB > ${prefix}/etc/fstab
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
-devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -73,7 +72,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-
+    
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -82,7 +81,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
             has_reiserfs=1
             ;;
     esac
-
+    
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else

hooks/debian/50-setup-hostname

@@ -89,24 +89,23 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        if [ -z "${nohosts}" ]; then
+        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
-            #
+        #
-            #  If we've updated the /etc/hosts file on the host machine
+        #  If we've updated the /etc/hosts file on the host machine
-            # and there is an installation of dnsmasq installed then
+        # and there is an installation of dnsmasq installed then
-            # reload it.
+        # reload it.
-            #
+        #
-            #  This will let the local LAN clients lookup the new address.
+        #  This will let the local LAN clients lookup the new address.
-            #
+        #
-            if [ -x /usr/sbin/dnsmasq ] ; then
+        if [ -x /usr/sbin/dnsmasq ] ; then
-                if [ -e /var/run/dnsmasq.pid ]; then
+            if [ -e /var/run/dnsmasq.pid ]; then
 
-                    logMessage Allowing DNSMasq to restart.
+                logMessage Allowing DNSMasq to restart.
-                    kill -HUP `cat /var/run/dnsmasq.pid`
+
-                fi
+                kill -HUP `cat /var/run/dnsmasq.pid`
             fi
         fi
     fi

hooks/debian/90-make-fstab

@@ -60,7 +60,6 @@ cat <<E_O_FSTAB > ${prefix}/etc/fstab
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
-devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -72,7 +71,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-
+    
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -81,7 +80,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
             has_reiserfs=1
             ;;
     esac
-
+    
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else

hooks/edgy/20-setup-apt

@@ -41,8 +41,7 @@ cp /etc/resolv.conf ${prefix}/etc
 #
 #  Process any of the present apt-conf setup lines.
 #
-for i in /etc/apt/apt.conf $(run-parts --list /etc/apt/apt.conf.d) ; do
+for i in /etc/apt/apt.conf /etc/apt/apt.conf.d/* ; do 
-
 
     #
     # If the file exists.  (Need this in case the literal glob fails.)
@@ -53,8 +52,7 @@ for i in /etc/apt/apt.conf $(run-parts --list /etc/apt/apt.conf.d) ; do
         # Save the matching line(s) to the proxy guess file.
         #
         logMessage The use of a proxy detected.
-
+        grep -i HTTP::Proxy $i >> ${prefix}/etc/apt/apt.conf.d/proxy-guess
-        grep -v '^//' $i | grep -i HTTP::Proxy >>${prefix}/etc/apt/apt.conf.d/proxy-guess
     fi
 done
 

hooks/edgy/30-disable-gettys

@@ -42,10 +42,7 @@ if [ ! -z "${serial_device}" ]; then
 
     # replace existing device.
     mv ${prefix}/etc/event.d/tty1  ${prefix}/etc/event.d/${serial_device}
-    sed -i -e s/tty1/${serial_device}/ ${prefix}/etc/event.d/${serial_device}
+    sed -i -e s/tty1/${serial_device}/ ${prefix}/etc/inittab
-    [ -f ${prefix}/etc/inittab ] && sed -i -e s/tty1/${serial_device}/ ${prefix}/etc/inittab
-
-
 
     # make sure that it is allowed to login.
     echo $serial_device >> ${prefix}/etc/securetty

hooks/edgy/50-setup-hostname

@@ -88,24 +88,23 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        if [ -z "${nohosts}" ]; then
+        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
-            #
+        #
-            #  If we've updated the /etc/hosts file on the host machine
+        #  If we've updated the /etc/hosts file on the host machine
-            # and there is an installation of dnsmasq installed then
+        # and there is an installation of dnsmasq installed then
-            # reload it.
+        # reload it.
-            #
+        #
-            #  This will let the local LAN clients lookup the new address.
+        #  This will let the local LAN clients lookup the new address.
-            #
+        #
-            if [ -x /usr/sbin/dnsmasq ] ; then
+        if [ -x /usr/sbin/dnsmasq ] ; then
-                if [ -e /var/run/dnsmasq.pid ]; then
+            if [ -e /var/run/dnsmasq.pid ]; then
 
-                    logMessage Allowing DNSMasq to restart.
+                logMessage Allowing DNSMasq to restart.
-                    kill -HUP `cat /var/run/dnsmasq.pid`
+
-                fi
+                kill -HUP `cat /var/run/dnsmasq.pid`
             fi
         fi
     fi

hooks/edgy/90-make-fstab

@@ -61,7 +61,6 @@ cat <<E_O_FSTAB > ${prefix}/etc/fstab
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
-devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -73,7 +72,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-
+    
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -82,7 +81,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
             has_reiserfs=1
             ;;
     esac
-
+    
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else

hooks/fedora-core-6/50-setup-hostname

@@ -89,25 +89,23 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        if [ -z "${nohosts}" ]; then
+        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
 
-            #
+        #
-            #  If we've updated the /etc/hosts file on the host machine
+        #  If we've updated the /etc/hosts file on the host machine
-            # and there is an installation of dnsmasq installed then
+        # and there is an installation of dnsmasq installed then
-            # reload it.
+        # reload it.
-            #
+        #
-            #  This will let the local LAN clients lookup the new address.
+        #  This will let the local LAN clients lookup the new address.
-            #
+        #
-            if [ -x /usr/sbin/dnsmasq ] ; then
+        if [ -x /usr/sbin/dnsmasq ] ; then
-                if [ -e /var/run/dnsmasq.pid ]; then
+            if [ -e /var/run/dnsmasq.pid ]; then
 
-                    logMessage Allowing DNSMasq to restart.
+                logMessage Allowing DNSMasq to restart.
-                    kill -HUP `cat /var/run/dnsmasq.pid`
+                kill -HUP `cat /var/run/dnsmasq.pid`
-                fi
             fi
         fi
     fi

hooks/gentoo/50-setup-hostname

@@ -96,24 +96,23 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        if [ -z "${nohosts}" ]; then
+        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
-            #
+        #
-            #  If we've updated the /etc/hosts file on the host machine
+        #  If we've updated the /etc/hosts file on the host machine
-            # and there is an installation of dnsmasq installed then
+        # and there is an installation of dnsmasq installed then
-            # reload it.
+        # reload it.
-            #
+        #
-            #  This will let the local LAN clients lookup the new address.
+        #  This will let the local LAN clients lookup the new address.
-            #
+        #
-            if [ -x /usr/sbin/dnsmasq ] ; then
+        if [ -x /usr/sbin/dnsmasq ] ; then
-                if [ -e /var/run/dnsmasq.pid ]; then
+            if [ -e /var/run/dnsmasq.pid ]; then
 
-                    logMessage Allowing DNSMasq to restart.
+                logMessage Allowing DNSMasq to restart.
-                    kill -HUP `cat /var/run/dnsmasq.pid`
+
-                fi
+                kill -HUP `cat /var/run/dnsmasq.pid`
             fi
         fi
     fi

hooks/gentoo/90-make-fstab

@@ -61,7 +61,6 @@ cat <<E_O_FSTAB > ${prefix}/etc/fstab
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
-devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -73,7 +72,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-
+    
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -82,7 +81,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
             has_reiserfs=1
             ;;
     esac
-
+    
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else

roles/puppet

@@ -1,41 +0,0 @@
-#!/bin/sh
-#
-#  This role installs Puppet upon the new guest system.
-#
-#  It must make sure that the server is not running before it exits
-# otherwise the temporary mounted directory will not be unmountable.
-#
-
-prefix=$1
-
-#
-#  Source our common functions - this will let us install a Debian package.
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    echo "Installation problem"
-fi
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Install ssh
-#
-installDebianPackage ${prefix} puppet
-
-
-#
-#  Make sure sshd isn't running, this will cause our unmounting of the
-# disk image to fail..
-#
-chroot ${prefix} /etc/init.d/puppet stop
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished