mirror of
https://github.com/Gehstock/Mist_FPGA.git
synced 2026-02-05 07:44:46 +00:00
SuperCobra: change to common T80
This commit is contained in:
@@ -40,7 +40,7 @@
|
||||
# Project-Wide Assignments
|
||||
# ========================
|
||||
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 16.1.2
|
||||
set_global_assignment -name LAST_QUARTUS_VERSION 13.1
|
||||
set_global_assignment -name LAST_QUARTUS_VERSION "13.1 SP4.26"
|
||||
set_global_assignment -name PROJECT_CREATION_TIME_DATE "01:53:30 APRIL 20, 2017"
|
||||
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
|
||||
set_global_assignment -name NUM_PARALLEL_PROCESSORS ALL
|
||||
@@ -160,11 +160,6 @@ set_global_assignment -name VERILOG_FILE rtl/pll.v
|
||||
set_global_assignment -name VHDL_FILE rtl/MULT18X18.vhd
|
||||
set_global_assignment -name VHDL_FILE rtl/i82c55.vhd
|
||||
set_global_assignment -name VHDL_FILE rtl/dpram.vhd
|
||||
set_global_assignment -name VHDL_FILE rtl/T80/T80sed.vhd
|
||||
set_global_assignment -name VHDL_FILE rtl/T80/T80_Reg.vhd
|
||||
set_global_assignment -name VHDL_FILE rtl/T80/T80_Pack.vhd
|
||||
set_global_assignment -name VHDL_FILE rtl/T80/T80_MCode.vhd
|
||||
set_global_assignment -name VHDL_FILE rtl/T80/T80_ALU.vhd
|
||||
set_global_assignment -name VHDL_FILE rtl/T80/T80.vhd
|
||||
set_global_assignment -name QIP_FILE ../../../common/CPU/T80/T80.qip
|
||||
set_global_assignment -name QIP_FILE ../../../common/mist/mist.qip
|
||||
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top
|
||||
@@ -1,51 +0,0 @@
|
||||
{ "" "" "" "Variable or input pin \"data_b\" is defined but never used." { } { } 0 287013 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Found combinational loop of 47 nodes" { } { } 0 332125 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "LOCKED port on the PLL is not properly connected on instance \"pll_hdmi:pll_hdmi\|pll_hdmi_0002:pll_hdmi_inst\|altera_pll:altera_pll_i\|general\[0\].gpll\". The LOCKED port on the PLL should be connected when the FBOUTCLK port is connected. Although it is unnecessary to connect the LOCKED signal, any logic driven off of an output clock of the PLL will not know when the PLL is locked and ready." { } { } 0 21300 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Net \"soc_system:soc_system\|soc_system_Video_Output:video_output\|alt_vip_cvo_core:cvo_core\|genlock_enable_sync1\[1\]\" is missing source, defaulting to GND" { } { } 0 12110 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Inferred RAM node \"zxspectrum:emu\|mist_io:mist_io\|ps2_kbd_fifo_rtl_0\" from synchronous design logic. Pass-through logic has been added to match the read-during-write behavior of the original design." { } { } 0 276020 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Inferred RAM node \"zxspectrum:emu\|mist_io:mist_io\|ps2_mouse_fifo_rtl_0\" from synchronous design logic. Pass-through logic has been added to match the read-during-write behavior of the original design." { } { } 0 276020 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "No destination clock period was found satisfying the set_net_delay assignment from \"\[get_keepers \{soc_system\|video_output\|cvo_core\|mode_banks\|h_sync_polarity_reg\}\]\" to \"\[get_keepers \{soc_system\|video_output\|cvo_core\|mode_banks\|vid_h_sync_polarity\}\]\". This assignment will be ignored." { } { } 0 17897 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "No destination clock period was found satisfying the set_net_delay assignment from \"\[get_keepers \{soc_system\|video_output\|cvo_core\|mode_banks\|v_sync_polarity_reg\}\]\" to \"\[get_keepers \{soc_system\|video_output\|cvo_core\|mode_banks\|vid_v_sync_polarity\}\]\". This assignment will be ignored." { } { } 0 17897 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "No destination clock period was found satisfying the set_net_delay assignment from \"\[get_keepers \{soc_system\|video_output\|cvo_core\|mode_banks\|interlaced_field_reg\[*\]\}\]\" to \"\[get_keepers \{soc_system\|video_output\|cvo_core\|mode_banks\|vid_interlaced_field\[*\]\}\]\". This assignment will be ignored." { } { } 0 17897 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "55 hierarchies have connectivity warnings - see the Connectivity Checks report folder" { } { } 0 12241 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Inferred RAM node \"emu:emu\|mister_io:mister_io\|ps2_kbd_fifo_rtl_0\" from synchronous design logic. Pass-through logic has been added to match the read-during-write behavior of the original design." { } { } 0 276020 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Inferred RAM node \"emu:emu\|mister_io:mister_io\|ps2_mouse_fifo_rtl_0\" from synchronous design logic. Pass-through logic has been added to match the read-during-write behavior of the original design." { } { } 0 276020 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Verilog HDL or VHDL warning at de10_top.v(97): object \"io_win\" assigned a value but never read" { } { } 0 10036 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Verilog HDL or VHDL warning at de10_top.v(102): object \"io_sdd\" assigned a value but never read" { } { } 0 10036 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Overwriting existing clock: vip\|hps\|fpga_interfaces\|clocks_resets\|h2f_user0_clk" { } { } 0 332043 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "Variable or input pin \"data_a\" is defined but never used." { } { } 0 287013 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "*" { } { } 0 169085 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "*" { } { } 0 174073 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "*" { } { } 0 332174 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "*" { } { } 0 13009 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "*" { } { } 0 21300 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "alt_vip_cvo_mode_banks" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "hps_sdram_pll.sv" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "alt_vip_common_frame_counter.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "hps_sdram_p0_acv_hard_memphy.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "hps_sdram_p0_acv_ldc.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "hps_sdram_p0_acv_hard_io_pads.v" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "altera_mem_if_hard_memory_controller_top_cyclonev.sv" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "genlock_enable_sync" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "u_calculate_mode" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "genlock_enable" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "reset_value" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "soc_system:soc_system\|soc_system_pll_video:pll_video\|altera_pll:altera_pll_i\|general\[0\].gpll" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "alt_vip_cvo_core.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "alt_vip_packet_transfer.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "hps_sdram_p0.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "alt_vip_common_dc_mixed_widths_fifo.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "altera_mem_if_hhp_qseq_synth_top" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "soc_system:soc_system\|soc_system_vip_vout:vip_vout\|alt_vip_cvo_core:cvo_core\|genlock_enable_sync1" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "soc_system:soc_system\|soc_system_vip_fb:vip_fb\|alt_vip_packet_transfer:pkt_trans_rd\|alt_vip_packet_transfer_read_proc:READ_BLOCK.read_proc_instance\|alt_vip_common_fifo2:output_msg_queue\|scfifo:scfifo_component\|scfifo_scd1:auto_generated\|a_dpfifo_e471:dpfifo\|altsyncram_ums1:FIFOram\|q_b" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "soc_system:soc_system\|soc_system_Video_Input:video_input\|alt_vip_cvi_core:cvi_core\|alt_vip_cvi_write_fifo_buffer:write_fifo_buffer" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "soc_system:soc_system\|soc_system_Frame_Buffer:frame_buffer\|alt_vip_packet_transfer:pkt_trans_rd" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "soc_system_hps_fpga_interfaces.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "soc_system_HPS_fpga_interfaces.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "RST" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "alt_vip_scaler_alg_core" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "cvo_core" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "vip_HPS_fpga_interfaces.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "alt_vip_dil_vof_scheduler.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
{ "" "" "" "alt_vip_dil_scheduler.sdc" { } { } 0 9999 "" 0 0 "Design Software" 0 -1 0 ""}
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,371 +0,0 @@
|
||||
-- ****
|
||||
-- T80(b) core. In an effort to merge and maintain bug fixes ....
|
||||
--
|
||||
--
|
||||
-- Ver 301 parity flag is just parity for 8080, also overflow for Z80, by Sean Riddle
|
||||
-- Ver 300 started tidyup
|
||||
-- MikeJ March 2005
|
||||
-- Latest version from www.fpgaarcade.com (original www.opencores.org)
|
||||
--
|
||||
-- ****
|
||||
--
|
||||
-- Z80 compatible microprocessor core
|
||||
--
|
||||
-- Version : 0247
|
||||
--
|
||||
-- Copyright (c) 2001-2002 Daniel Wallner (jesus@opencores.org)
|
||||
--
|
||||
-- All rights reserved
|
||||
--
|
||||
-- Redistribution and use in source and synthezised forms, with or without
|
||||
-- modification, are permitted provided that the following conditions are met:
|
||||
--
|
||||
-- Redistributions of source code must retain the above copyright notice,
|
||||
-- this list of conditions and the following disclaimer.
|
||||
--
|
||||
-- Redistributions in synthesized form must reproduce the above copyright
|
||||
-- notice, this list of conditions and the following disclaimer in the
|
||||
-- documentation and/or other materials provided with the distribution.
|
||||
--
|
||||
-- Neither the name of the author nor the names of other contributors may
|
||||
-- be used to endorse or promote products derived from this software without
|
||||
-- specific prior written permission.
|
||||
--
|
||||
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
||||
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
||||
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
-- POSSIBILITY OF SUCH DAMAGE.
|
||||
--
|
||||
-- Please report bugs to the author, but before you do so, please
|
||||
-- make sure that this is not a derivative work and that
|
||||
-- you have the latest version of this file.
|
||||
--
|
||||
-- The latest version of this file can be found at:
|
||||
-- http://www.opencores.org/cvsweb.shtml/t80/
|
||||
--
|
||||
-- Limitations :
|
||||
--
|
||||
-- File history :
|
||||
--
|
||||
-- 0214 : Fixed mostly flags, only the block instructions now fail the zex regression test
|
||||
--
|
||||
-- 0238 : Fixed zero flag for 16 bit SBC and ADC
|
||||
--
|
||||
-- 0240 : Added GB operations
|
||||
--
|
||||
-- 0242 : Cleanup
|
||||
--
|
||||
-- 0247 : Cleanup
|
||||
--
|
||||
|
||||
library IEEE;
|
||||
use IEEE.std_logic_1164.all;
|
||||
use IEEE.numeric_std.all;
|
||||
|
||||
entity T80_ALU is
|
||||
generic(
|
||||
Mode : integer := 0;
|
||||
Flag_C : integer := 0;
|
||||
Flag_N : integer := 1;
|
||||
Flag_P : integer := 2;
|
||||
Flag_X : integer := 3;
|
||||
Flag_H : integer := 4;
|
||||
Flag_Y : integer := 5;
|
||||
Flag_Z : integer := 6;
|
||||
Flag_S : integer := 7
|
||||
);
|
||||
port(
|
||||
Arith16 : in std_logic;
|
||||
Z16 : in std_logic;
|
||||
ALU_Op : in std_logic_vector(3 downto 0);
|
||||
IR : in std_logic_vector(5 downto 0);
|
||||
ISet : in std_logic_vector(1 downto 0);
|
||||
BusA : in std_logic_vector(7 downto 0);
|
||||
BusB : in std_logic_vector(7 downto 0);
|
||||
F_In : in std_logic_vector(7 downto 0);
|
||||
Q : out std_logic_vector(7 downto 0);
|
||||
F_Out : out std_logic_vector(7 downto 0)
|
||||
);
|
||||
end T80_ALU;
|
||||
|
||||
architecture rtl of T80_ALU is
|
||||
|
||||
procedure AddSub(A : std_logic_vector;
|
||||
B : std_logic_vector;
|
||||
Sub : std_logic;
|
||||
Carry_In : std_logic;
|
||||
signal Res : out std_logic_vector;
|
||||
signal Carry : out std_logic) is
|
||||
|
||||
variable B_i : unsigned(A'length - 1 downto 0);
|
||||
variable Res_i : unsigned(A'length + 1 downto 0);
|
||||
begin
|
||||
if Sub = '1' then
|
||||
B_i := not unsigned(B);
|
||||
else
|
||||
B_i := unsigned(B);
|
||||
end if;
|
||||
|
||||
Res_i := unsigned("0" & A & Carry_In) + unsigned("0" & B_i & "1");
|
||||
Carry <= Res_i(A'length + 1);
|
||||
Res <= std_logic_vector(Res_i(A'length downto 1));
|
||||
end;
|
||||
|
||||
-- AddSub variables (temporary signals)
|
||||
signal UseCarry : std_logic;
|
||||
signal Carry7_v : std_logic;
|
||||
signal Overflow_v : std_logic;
|
||||
signal HalfCarry_v : std_logic;
|
||||
signal Carry_v : std_logic;
|
||||
signal Q_v : std_logic_vector(7 downto 0);
|
||||
|
||||
signal BitMask : std_logic_vector(7 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
with IR(5 downto 3) select BitMask <= "00000001" when "000",
|
||||
"00000010" when "001",
|
||||
"00000100" when "010",
|
||||
"00001000" when "011",
|
||||
"00010000" when "100",
|
||||
"00100000" when "101",
|
||||
"01000000" when "110",
|
||||
"10000000" when others;
|
||||
|
||||
UseCarry <= not ALU_Op(2) and ALU_Op(0);
|
||||
AddSub(BusA(3 downto 0), BusB(3 downto 0), ALU_Op(1), ALU_Op(1) xor (UseCarry and F_In(Flag_C)), Q_v(3 downto 0), HalfCarry_v);
|
||||
AddSub(BusA(6 downto 4), BusB(6 downto 4), ALU_Op(1), HalfCarry_v, Q_v(6 downto 4), Carry7_v);
|
||||
AddSub(BusA(7 downto 7), BusB(7 downto 7), ALU_Op(1), Carry7_v, Q_v(7 downto 7), Carry_v);
|
||||
|
||||
-- bug fix - parity flag is just parity for 8080, also overflow for Z80
|
||||
process (Carry_v, Carry7_v, Q_v)
|
||||
begin
|
||||
if(Mode=2) then
|
||||
OverFlow_v <= not (Q_v(0) xor Q_v(1) xor Q_v(2) xor Q_v(3) xor
|
||||
Q_v(4) xor Q_v(5) xor Q_v(6) xor Q_v(7)); else
|
||||
OverFlow_v <= Carry_v xor Carry7_v;
|
||||
end if;
|
||||
end process;
|
||||
|
||||
process (Arith16, ALU_OP, F_In, BusA, BusB, IR, Q_v, Carry_v, HalfCarry_v, OverFlow_v, BitMask, ISet, Z16)
|
||||
variable Q_t : std_logic_vector(7 downto 0);
|
||||
variable DAA_Q : unsigned(8 downto 0);
|
||||
begin
|
||||
Q_t := "--------";
|
||||
F_Out <= F_In;
|
||||
DAA_Q := "---------";
|
||||
case ALU_Op is
|
||||
when "0000" | "0001" | "0010" | "0011" | "0100" | "0101" | "0110" | "0111" =>
|
||||
F_Out(Flag_N) <= '0';
|
||||
F_Out(Flag_C) <= '0';
|
||||
case ALU_OP(2 downto 0) is
|
||||
when "000" | "001" => -- ADD, ADC
|
||||
Q_t := Q_v;
|
||||
F_Out(Flag_C) <= Carry_v;
|
||||
F_Out(Flag_H) <= HalfCarry_v;
|
||||
F_Out(Flag_P) <= OverFlow_v;
|
||||
when "010" | "011" | "111" => -- SUB, SBC, CP
|
||||
Q_t := Q_v;
|
||||
F_Out(Flag_N) <= '1';
|
||||
F_Out(Flag_C) <= not Carry_v;
|
||||
F_Out(Flag_H) <= not HalfCarry_v;
|
||||
F_Out(Flag_P) <= OverFlow_v;
|
||||
when "100" => -- AND
|
||||
Q_t(7 downto 0) := BusA and BusB;
|
||||
F_Out(Flag_H) <= '1';
|
||||
when "101" => -- XOR
|
||||
Q_t(7 downto 0) := BusA xor BusB;
|
||||
F_Out(Flag_H) <= '0';
|
||||
when others => -- OR "110"
|
||||
Q_t(7 downto 0) := BusA or BusB;
|
||||
F_Out(Flag_H) <= '0';
|
||||
end case;
|
||||
if ALU_Op(2 downto 0) = "111" then -- CP
|
||||
F_Out(Flag_X) <= BusB(3);
|
||||
F_Out(Flag_Y) <= BusB(5);
|
||||
else
|
||||
F_Out(Flag_X) <= Q_t(3);
|
||||
F_Out(Flag_Y) <= Q_t(5);
|
||||
end if;
|
||||
if Q_t(7 downto 0) = "00000000" then
|
||||
F_Out(Flag_Z) <= '1';
|
||||
if Z16 = '1' then
|
||||
F_Out(Flag_Z) <= F_In(Flag_Z); -- 16 bit ADC,SBC
|
||||
end if;
|
||||
else
|
||||
F_Out(Flag_Z) <= '0';
|
||||
end if;
|
||||
F_Out(Flag_S) <= Q_t(7);
|
||||
case ALU_Op(2 downto 0) is
|
||||
when "000" | "001" | "010" | "011" | "111" => -- ADD, ADC, SUB, SBC, CP
|
||||
when others =>
|
||||
F_Out(Flag_P) <= not (Q_t(0) xor Q_t(1) xor Q_t(2) xor Q_t(3) xor
|
||||
Q_t(4) xor Q_t(5) xor Q_t(6) xor Q_t(7));
|
||||
end case;
|
||||
if Arith16 = '1' then
|
||||
F_Out(Flag_S) <= F_In(Flag_S);
|
||||
F_Out(Flag_Z) <= F_In(Flag_Z);
|
||||
F_Out(Flag_P) <= F_In(Flag_P);
|
||||
end if;
|
||||
when "1100" =>
|
||||
-- DAA
|
||||
F_Out(Flag_H) <= F_In(Flag_H);
|
||||
F_Out(Flag_C) <= F_In(Flag_C);
|
||||
DAA_Q(7 downto 0) := unsigned(BusA);
|
||||
DAA_Q(8) := '0';
|
||||
if F_In(Flag_N) = '0' then
|
||||
-- After addition
|
||||
-- Alow > 9 or H = 1
|
||||
if DAA_Q(3 downto 0) > 9 or F_In(Flag_H) = '1' then
|
||||
if (DAA_Q(3 downto 0) > 9) then
|
||||
F_Out(Flag_H) <= '1';
|
||||
else
|
||||
F_Out(Flag_H) <= '0';
|
||||
end if;
|
||||
DAA_Q := DAA_Q + 6;
|
||||
end if;
|
||||
-- new Ahigh > 9 or C = 1
|
||||
if DAA_Q(8 downto 4) > 9 or F_In(Flag_C) = '1' then
|
||||
DAA_Q := DAA_Q + 96; -- 0x60
|
||||
end if;
|
||||
else
|
||||
-- After subtraction
|
||||
if DAA_Q(3 downto 0) > 9 or F_In(Flag_H) = '1' then
|
||||
if DAA_Q(3 downto 0) > 5 then
|
||||
F_Out(Flag_H) <= '0';
|
||||
end if;
|
||||
DAA_Q(7 downto 0) := DAA_Q(7 downto 0) - 6;
|
||||
end if;
|
||||
if unsigned(BusA) > 153 or F_In(Flag_C) = '1' then
|
||||
DAA_Q := DAA_Q - 352; -- 0x160
|
||||
end if;
|
||||
end if;
|
||||
F_Out(Flag_X) <= DAA_Q(3);
|
||||
F_Out(Flag_Y) <= DAA_Q(5);
|
||||
F_Out(Flag_C) <= F_In(Flag_C) or DAA_Q(8);
|
||||
Q_t := std_logic_vector(DAA_Q(7 downto 0));
|
||||
if DAA_Q(7 downto 0) = "00000000" then
|
||||
F_Out(Flag_Z) <= '1';
|
||||
else
|
||||
F_Out(Flag_Z) <= '0';
|
||||
end if;
|
||||
F_Out(Flag_S) <= DAA_Q(7);
|
||||
F_Out(Flag_P) <= not (DAA_Q(0) xor DAA_Q(1) xor DAA_Q(2) xor DAA_Q(3) xor
|
||||
DAA_Q(4) xor DAA_Q(5) xor DAA_Q(6) xor DAA_Q(7));
|
||||
when "1101" | "1110" =>
|
||||
-- RLD, RRD
|
||||
Q_t(7 downto 4) := BusA(7 downto 4);
|
||||
if ALU_Op(0) = '1' then
|
||||
Q_t(3 downto 0) := BusB(7 downto 4);
|
||||
else
|
||||
Q_t(3 downto 0) := BusB(3 downto 0);
|
||||
end if;
|
||||
F_Out(Flag_H) <= '0';
|
||||
F_Out(Flag_N) <= '0';
|
||||
F_Out(Flag_X) <= Q_t(3);
|
||||
F_Out(Flag_Y) <= Q_t(5);
|
||||
if Q_t(7 downto 0) = "00000000" then
|
||||
F_Out(Flag_Z) <= '1';
|
||||
else
|
||||
F_Out(Flag_Z) <= '0';
|
||||
end if;
|
||||
F_Out(Flag_S) <= Q_t(7);
|
||||
F_Out(Flag_P) <= not (Q_t(0) xor Q_t(1) xor Q_t(2) xor Q_t(3) xor
|
||||
Q_t(4) xor Q_t(5) xor Q_t(6) xor Q_t(7));
|
||||
when "1001" =>
|
||||
-- BIT
|
||||
Q_t(7 downto 0) := BusB and BitMask;
|
||||
F_Out(Flag_S) <= Q_t(7);
|
||||
if Q_t(7 downto 0) = "00000000" then
|
||||
F_Out(Flag_Z) <= '1';
|
||||
F_Out(Flag_P) <= '1';
|
||||
else
|
||||
F_Out(Flag_Z) <= '0';
|
||||
F_Out(Flag_P) <= '0';
|
||||
end if;
|
||||
F_Out(Flag_H) <= '1';
|
||||
F_Out(Flag_N) <= '0';
|
||||
F_Out(Flag_X) <= '0';
|
||||
F_Out(Flag_Y) <= '0';
|
||||
if IR(2 downto 0) /= "110" then
|
||||
F_Out(Flag_X) <= BusB(3);
|
||||
F_Out(Flag_Y) <= BusB(5);
|
||||
end if;
|
||||
when "1010" =>
|
||||
-- SET
|
||||
Q_t(7 downto 0) := BusB or BitMask;
|
||||
when "1011" =>
|
||||
-- RES
|
||||
Q_t(7 downto 0) := BusB and not BitMask;
|
||||
when "1000" =>
|
||||
-- ROT
|
||||
case IR(5 downto 3) is
|
||||
when "000" => -- RLC
|
||||
Q_t(7 downto 1) := BusA(6 downto 0);
|
||||
Q_t(0) := BusA(7);
|
||||
F_Out(Flag_C) <= BusA(7);
|
||||
when "010" => -- RL
|
||||
Q_t(7 downto 1) := BusA(6 downto 0);
|
||||
Q_t(0) := F_In(Flag_C);
|
||||
F_Out(Flag_C) <= BusA(7);
|
||||
when "001" => -- RRC
|
||||
Q_t(6 downto 0) := BusA(7 downto 1);
|
||||
Q_t(7) := BusA(0);
|
||||
F_Out(Flag_C) <= BusA(0);
|
||||
when "011" => -- RR
|
||||
Q_t(6 downto 0) := BusA(7 downto 1);
|
||||
Q_t(7) := F_In(Flag_C);
|
||||
F_Out(Flag_C) <= BusA(0);
|
||||
when "100" => -- SLA
|
||||
Q_t(7 downto 1) := BusA(6 downto 0);
|
||||
Q_t(0) := '0';
|
||||
F_Out(Flag_C) <= BusA(7);
|
||||
when "110" => -- SLL (Undocumented) / SWAP
|
||||
if Mode = 3 then
|
||||
Q_t(7 downto 4) := BusA(3 downto 0);
|
||||
Q_t(3 downto 0) := BusA(7 downto 4);
|
||||
F_Out(Flag_C) <= '0';
|
||||
else
|
||||
Q_t(7 downto 1) := BusA(6 downto 0);
|
||||
Q_t(0) := '1';
|
||||
F_Out(Flag_C) <= BusA(7);
|
||||
end if;
|
||||
when "101" => -- SRA
|
||||
Q_t(6 downto 0) := BusA(7 downto 1);
|
||||
Q_t(7) := BusA(7);
|
||||
F_Out(Flag_C) <= BusA(0);
|
||||
when others => -- SRL
|
||||
Q_t(6 downto 0) := BusA(7 downto 1);
|
||||
Q_t(7) := '0';
|
||||
F_Out(Flag_C) <= BusA(0);
|
||||
end case;
|
||||
F_Out(Flag_H) <= '0';
|
||||
F_Out(Flag_N) <= '0';
|
||||
F_Out(Flag_X) <= Q_t(3);
|
||||
F_Out(Flag_Y) <= Q_t(5);
|
||||
F_Out(Flag_S) <= Q_t(7);
|
||||
if Q_t(7 downto 0) = "00000000" then
|
||||
F_Out(Flag_Z) <= '1';
|
||||
else
|
||||
F_Out(Flag_Z) <= '0';
|
||||
end if;
|
||||
F_Out(Flag_P) <= not (Q_t(0) xor Q_t(1) xor Q_t(2) xor Q_t(3) xor
|
||||
Q_t(4) xor Q_t(5) xor Q_t(6) xor Q_t(7));
|
||||
if ISet = "00" then
|
||||
F_Out(Flag_P) <= F_In(Flag_P);
|
||||
F_Out(Flag_S) <= F_In(Flag_S);
|
||||
F_Out(Flag_Z) <= F_In(Flag_Z);
|
||||
end if;
|
||||
when others =>
|
||||
null;
|
||||
end case;
|
||||
Q <= Q_t;
|
||||
end process;
|
||||
end;
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,217 +0,0 @@
|
||||
-- ****
|
||||
-- T80(b) core. In an effort to merge and maintain bug fixes ....
|
||||
--
|
||||
--
|
||||
-- Ver 300 started tidyup
|
||||
-- MikeJ March 2005
|
||||
-- Latest version from www.fpgaarcade.com (original www.opencores.org)
|
||||
--
|
||||
-- ****
|
||||
--
|
||||
-- Z80 compatible microprocessor core
|
||||
--
|
||||
-- Version : 0242
|
||||
--
|
||||
-- Copyright (c) 2001-2002 Daniel Wallner (jesus@opencores.org)
|
||||
--
|
||||
-- All rights reserved
|
||||
--
|
||||
-- Redistribution and use in source and synthezised forms, with or without
|
||||
-- modification, are permitted provided that the following conditions are met:
|
||||
--
|
||||
-- Redistributions of source code must retain the above copyright notice,
|
||||
-- this list of conditions and the following disclaimer.
|
||||
--
|
||||
-- Redistributions in synthesized form must reproduce the above copyright
|
||||
-- notice, this list of conditions and the following disclaimer in the
|
||||
-- documentation and/or other materials provided with the distribution.
|
||||
--
|
||||
-- Neither the name of the author nor the names of other contributors may
|
||||
-- be used to endorse or promote products derived from this software without
|
||||
-- specific prior written permission.
|
||||
--
|
||||
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
||||
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
||||
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
-- POSSIBILITY OF SUCH DAMAGE.
|
||||
--
|
||||
-- Please report bugs to the author, but before you do so, please
|
||||
-- make sure that this is not a derivative work and that
|
||||
-- you have the latest version of this file.
|
||||
--
|
||||
-- The latest version of this file can be found at:
|
||||
-- http://www.opencores.org/cvsweb.shtml/t80/
|
||||
--
|
||||
-- Limitations :
|
||||
--
|
||||
-- File history :
|
||||
--
|
||||
|
||||
library IEEE;
|
||||
use IEEE.std_logic_1164.all;
|
||||
|
||||
package T80_Pack is
|
||||
|
||||
component T80
|
||||
generic(
|
||||
Mode : integer := 0; -- 0 => Z80, 1 => Fast Z80, 2 => 8080, 3 => GB
|
||||
IOWait : integer := 0; -- 1 => Single cycle I/O, 1 => Std I/O cycle
|
||||
Flag_C : integer := 0;
|
||||
Flag_N : integer := 1;
|
||||
Flag_P : integer := 2;
|
||||
Flag_X : integer := 3;
|
||||
Flag_H : integer := 4;
|
||||
Flag_Y : integer := 5;
|
||||
Flag_Z : integer := 6;
|
||||
Flag_S : integer := 7
|
||||
);
|
||||
port(
|
||||
RESET_n : in std_logic;
|
||||
CLK_n : in std_logic;
|
||||
CEN : in std_logic;
|
||||
WAIT_n : in std_logic;
|
||||
INT_n : in std_logic;
|
||||
NMI_n : in std_logic;
|
||||
BUSRQ_n : in std_logic;
|
||||
M1_n : out std_logic;
|
||||
IORQ : out std_logic;
|
||||
NoRead : out std_logic;
|
||||
Write : out std_logic;
|
||||
RFSH_n : out std_logic;
|
||||
HALT_n : out std_logic;
|
||||
BUSAK_n : out std_logic;
|
||||
A : out std_logic_vector(15 downto 0);
|
||||
DInst : in std_logic_vector(7 downto 0);
|
||||
DI : in std_logic_vector(7 downto 0);
|
||||
DO : out std_logic_vector(7 downto 0);
|
||||
MC : out std_logic_vector(2 downto 0);
|
||||
TS : out std_logic_vector(2 downto 0);
|
||||
IntCycle_n : out std_logic;
|
||||
IntE : out std_logic;
|
||||
Stop : out std_logic
|
||||
);
|
||||
end component;
|
||||
|
||||
component T80_Reg
|
||||
port(
|
||||
Clk : in std_logic;
|
||||
CEN : in std_logic;
|
||||
WEH : in std_logic;
|
||||
WEL : in std_logic;
|
||||
AddrA : in std_logic_vector(2 downto 0);
|
||||
AddrB : in std_logic_vector(2 downto 0);
|
||||
AddrC : in std_logic_vector(2 downto 0);
|
||||
DIH : in std_logic_vector(7 downto 0);
|
||||
DIL : in std_logic_vector(7 downto 0);
|
||||
DOAH : out std_logic_vector(7 downto 0);
|
||||
DOAL : out std_logic_vector(7 downto 0);
|
||||
DOBH : out std_logic_vector(7 downto 0);
|
||||
DOBL : out std_logic_vector(7 downto 0);
|
||||
DOCH : out std_logic_vector(7 downto 0);
|
||||
DOCL : out std_logic_vector(7 downto 0)
|
||||
);
|
||||
end component;
|
||||
|
||||
component T80_MCode
|
||||
generic(
|
||||
Mode : integer := 0;
|
||||
Flag_C : integer := 0;
|
||||
Flag_N : integer := 1;
|
||||
Flag_P : integer := 2;
|
||||
Flag_X : integer := 3;
|
||||
Flag_H : integer := 4;
|
||||
Flag_Y : integer := 5;
|
||||
Flag_Z : integer := 6;
|
||||
Flag_S : integer := 7
|
||||
);
|
||||
port(
|
||||
IR : in std_logic_vector(7 downto 0);
|
||||
ISet : in std_logic_vector(1 downto 0);
|
||||
MCycle : in std_logic_vector(2 downto 0);
|
||||
F : in std_logic_vector(7 downto 0);
|
||||
NMICycle : in std_logic;
|
||||
IntCycle : in std_logic;
|
||||
MCycles : out std_logic_vector(2 downto 0);
|
||||
TStates : out std_logic_vector(2 downto 0);
|
||||
Prefix : out std_logic_vector(1 downto 0); -- None,BC,ED,DD/FD
|
||||
Inc_PC : out std_logic;
|
||||
Inc_WZ : out std_logic;
|
||||
IncDec_16 : out std_logic_vector(3 downto 0); -- BC,DE,HL,SP 0 is inc
|
||||
Read_To_Reg : out std_logic;
|
||||
Read_To_Acc : out std_logic;
|
||||
Set_BusA_To : out std_logic_vector(3 downto 0); -- B,C,D,E,H,L,DI/DB,A,SP(L),SP(M),0,F
|
||||
Set_BusB_To : out std_logic_vector(3 downto 0); -- B,C,D,E,H,L,DI,A,SP(L),SP(M),1,F,PC(L),PC(M),0
|
||||
ALU_Op : out std_logic_vector(3 downto 0);
|
||||
-- ADD, ADC, SUB, SBC, AND, XOR, OR, CP, ROT, BIT, SET, RES, DAA, RLD, RRD, None
|
||||
Save_ALU : out std_logic;
|
||||
PreserveC : out std_logic;
|
||||
Arith16 : out std_logic;
|
||||
Set_Addr_To : out std_logic_vector(2 downto 0); -- aNone,aXY,aIOA,aSP,aBC,aDE,aZI
|
||||
IORQ : out std_logic;
|
||||
Jump : out std_logic;
|
||||
JumpE : out std_logic;
|
||||
JumpXY : out std_logic;
|
||||
Call : out std_logic;
|
||||
RstP : out std_logic;
|
||||
LDZ : out std_logic;
|
||||
LDW : out std_logic;
|
||||
LDSPHL : out std_logic;
|
||||
Special_LD : out std_logic_vector(2 downto 0); -- A,I;A,R;I,A;R,A;None
|
||||
ExchangeDH : out std_logic;
|
||||
ExchangeRp : out std_logic;
|
||||
ExchangeAF : out std_logic;
|
||||
ExchangeRS : out std_logic;
|
||||
I_DJNZ : out std_logic;
|
||||
I_CPL : out std_logic;
|
||||
I_CCF : out std_logic;
|
||||
I_SCF : out std_logic;
|
||||
I_RETN : out std_logic;
|
||||
I_BT : out std_logic;
|
||||
I_BC : out std_logic;
|
||||
I_BTR : out std_logic;
|
||||
I_RLD : out std_logic;
|
||||
I_RRD : out std_logic;
|
||||
I_INRC : out std_logic;
|
||||
SetDI : out std_logic;
|
||||
SetEI : out std_logic;
|
||||
IMode : out std_logic_vector(1 downto 0);
|
||||
Halt : out std_logic;
|
||||
NoRead : out std_logic;
|
||||
Write : out std_logic
|
||||
);
|
||||
end component;
|
||||
|
||||
component T80_ALU
|
||||
generic(
|
||||
Mode : integer := 0;
|
||||
Flag_C : integer := 0;
|
||||
Flag_N : integer := 1;
|
||||
Flag_P : integer := 2;
|
||||
Flag_X : integer := 3;
|
||||
Flag_H : integer := 4;
|
||||
Flag_Y : integer := 5;
|
||||
Flag_Z : integer := 6;
|
||||
Flag_S : integer := 7
|
||||
);
|
||||
port(
|
||||
Arith16 : in std_logic;
|
||||
Z16 : in std_logic;
|
||||
ALU_Op : in std_logic_vector(3 downto 0);
|
||||
IR : in std_logic_vector(5 downto 0);
|
||||
ISet : in std_logic_vector(1 downto 0);
|
||||
BusA : in std_logic_vector(7 downto 0);
|
||||
BusB : in std_logic_vector(7 downto 0);
|
||||
F_In : in std_logic_vector(7 downto 0);
|
||||
Q : out std_logic_vector(7 downto 0);
|
||||
F_Out : out std_logic_vector(7 downto 0)
|
||||
);
|
||||
end component;
|
||||
|
||||
end;
|
||||
@@ -1,105 +0,0 @@
|
||||
--
|
||||
-- T80 Registers, technology independent
|
||||
--
|
||||
-- Version : 0244
|
||||
--
|
||||
-- Copyright (c) 2002 Daniel Wallner (jesus@opencores.org)
|
||||
--
|
||||
-- All rights reserved
|
||||
--
|
||||
-- Redistribution and use in source and synthezised forms, with or without
|
||||
-- modification, are permitted provided that the following conditions are met:
|
||||
--
|
||||
-- Redistributions of source code must retain the above copyright notice,
|
||||
-- this list of conditions and the following disclaimer.
|
||||
--
|
||||
-- Redistributions in synthesized form must reproduce the above copyright
|
||||
-- notice, this list of conditions and the following disclaimer in the
|
||||
-- documentation and/or other materials provided with the distribution.
|
||||
--
|
||||
-- Neither the name of the author nor the names of other contributors may
|
||||
-- be used to endorse or promote products derived from this software without
|
||||
-- specific prior written permission.
|
||||
--
|
||||
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
||||
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
||||
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
-- POSSIBILITY OF SUCH DAMAGE.
|
||||
--
|
||||
-- Please report bugs to the author, but before you do so, please
|
||||
-- make sure that this is not a derivative work and that
|
||||
-- you have the latest version of this file.
|
||||
--
|
||||
-- The latest version of this file can be found at:
|
||||
-- http://www.opencores.org/cvsweb.shtml/t51/
|
||||
--
|
||||
-- Limitations :
|
||||
--
|
||||
-- File history :
|
||||
--
|
||||
-- 0242 : Initial release
|
||||
--
|
||||
-- 0244 : Changed to single register file
|
||||
--
|
||||
|
||||
library IEEE;
|
||||
use IEEE.std_logic_1164.all;
|
||||
use IEEE.numeric_std.all;
|
||||
|
||||
entity T80_Reg is
|
||||
port(
|
||||
Clk : in std_logic;
|
||||
CEN : in std_logic;
|
||||
WEH : in std_logic;
|
||||
WEL : in std_logic;
|
||||
AddrA : in std_logic_vector(2 downto 0);
|
||||
AddrB : in std_logic_vector(2 downto 0);
|
||||
AddrC : in std_logic_vector(2 downto 0);
|
||||
DIH : in std_logic_vector(7 downto 0);
|
||||
DIL : in std_logic_vector(7 downto 0);
|
||||
DOAH : out std_logic_vector(7 downto 0);
|
||||
DOAL : out std_logic_vector(7 downto 0);
|
||||
DOBH : out std_logic_vector(7 downto 0);
|
||||
DOBL : out std_logic_vector(7 downto 0);
|
||||
DOCH : out std_logic_vector(7 downto 0);
|
||||
DOCL : out std_logic_vector(7 downto 0)
|
||||
);
|
||||
end T80_Reg;
|
||||
|
||||
architecture rtl of T80_Reg is
|
||||
|
||||
type Register_Image is array (natural range <>) of std_logic_vector(7 downto 0);
|
||||
signal RegsH : Register_Image(0 to 7);
|
||||
signal RegsL : Register_Image(0 to 7);
|
||||
|
||||
begin
|
||||
|
||||
process (Clk)
|
||||
begin
|
||||
if Clk'event and Clk = '1' then
|
||||
if CEN = '1' then
|
||||
if WEH = '1' then
|
||||
RegsH(to_integer(unsigned(AddrA))) <= DIH;
|
||||
end if;
|
||||
if WEL = '1' then
|
||||
RegsL(to_integer(unsigned(AddrA))) <= DIL;
|
||||
end if;
|
||||
end if;
|
||||
end if;
|
||||
end process;
|
||||
|
||||
DOAH <= RegsH(to_integer(unsigned(AddrA)));
|
||||
DOAL <= RegsL(to_integer(unsigned(AddrA)));
|
||||
DOBH <= RegsH(to_integer(unsigned(AddrB)));
|
||||
DOBL <= RegsL(to_integer(unsigned(AddrB)));
|
||||
DOCH <= RegsH(to_integer(unsigned(AddrC)));
|
||||
DOCL <= RegsL(to_integer(unsigned(AddrC)));
|
||||
|
||||
end;
|
||||
@@ -1,179 +0,0 @@
|
||||
-- ****
|
||||
-- T80(b) core. In an effort to merge and maintain bug fixes ....
|
||||
--
|
||||
--
|
||||
-- Ver 300 started tidyup
|
||||
-- MikeJ March 2005
|
||||
-- Latest version from www.fpgaarcade.com (original www.opencores.org)
|
||||
--
|
||||
-- ****
|
||||
-- ** CUSTOM 2 CLOCK MEMORY ACCESS FOR PACMAN, MIKEJ **
|
||||
--
|
||||
-- Z80 compatible microprocessor core, synchronous top level with clock enable
|
||||
-- Different timing than the original z80
|
||||
-- Inputs needs to be synchronous and outputs may glitch
|
||||
--
|
||||
-- Version : 0238
|
||||
--
|
||||
-- Copyright (c) 2001-2002 Daniel Wallner (jesus@opencores.org)
|
||||
--
|
||||
-- All rights reserved
|
||||
--
|
||||
-- Redistribution and use in source and synthezised forms, with or without
|
||||
-- modification, are permitted provided that the following conditions are met:
|
||||
--
|
||||
-- Redistributions of source code must retain the above copyright notice,
|
||||
-- this list of conditions and the following disclaimer.
|
||||
--
|
||||
-- Redistributions in synthesized form must reproduce the above copyright
|
||||
-- notice, this list of conditions and the following disclaimer in the
|
||||
-- documentation and/or other materials provided with the distribution.
|
||||
--
|
||||
-- Neither the name of the author nor the names of other contributors may
|
||||
-- be used to endorse or promote products derived from this software without
|
||||
-- specific prior written permission.
|
||||
--
|
||||
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
||||
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
||||
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
-- POSSIBILITY OF SUCH DAMAGE.
|
||||
--
|
||||
-- Please report bugs to the author, but before you do so, please
|
||||
-- make sure that this is not a derivative work and that
|
||||
-- you have the latest version of this file.
|
||||
--
|
||||
-- The latest version of this file can be found at:
|
||||
-- http://www.opencores.org/cvsweb.shtml/t80/
|
||||
--
|
||||
-- Limitations :
|
||||
--
|
||||
-- File history :
|
||||
--
|
||||
-- 0235 : First release
|
||||
--
|
||||
-- 0236 : Added T2Write generic
|
||||
--
|
||||
-- 0237 : Fixed T2Write with wait state
|
||||
--
|
||||
-- 0238 : Updated for T80 interface change
|
||||
--
|
||||
-- 0242 : Updated for T80 interface change
|
||||
--
|
||||
|
||||
library IEEE;
|
||||
use IEEE.std_logic_1164.all;
|
||||
use IEEE.numeric_std.all;
|
||||
use work.T80_Pack.all;
|
||||
|
||||
entity T80sed is
|
||||
port(
|
||||
RESET_n : in std_logic;
|
||||
CLK_n : in std_logic;
|
||||
CLKEN : in std_logic;
|
||||
WAIT_n : in std_logic;
|
||||
INT_n : in std_logic;
|
||||
NMI_n : in std_logic;
|
||||
BUSRQ_n : in std_logic;
|
||||
M1_n : out std_logic;
|
||||
MREQ_n : out std_logic;
|
||||
IORQ_n : out std_logic;
|
||||
RD_n : out std_logic;
|
||||
WR_n : out std_logic;
|
||||
RFSH_n : out std_logic;
|
||||
HALT_n : out std_logic;
|
||||
BUSAK_n : out std_logic;
|
||||
A : out std_logic_vector(15 downto 0);
|
||||
DI : in std_logic_vector(7 downto 0);
|
||||
DO : out std_logic_vector(7 downto 0)
|
||||
);
|
||||
end T80sed;
|
||||
|
||||
architecture rtl of T80sed is
|
||||
|
||||
signal IntCycle_n : std_logic;
|
||||
signal NoRead : std_logic;
|
||||
signal Write : std_logic;
|
||||
signal IORQ : std_logic;
|
||||
signal DI_Reg : std_logic_vector(7 downto 0);
|
||||
signal MCycle : std_logic_vector(2 downto 0);
|
||||
signal TState : std_logic_vector(2 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
u0 : T80
|
||||
generic map(
|
||||
Mode => 0,
|
||||
IOWait => 1)
|
||||
port map(
|
||||
CEN => CLKEN,
|
||||
M1_n => M1_n,
|
||||
IORQ => IORQ,
|
||||
NoRead => NoRead,
|
||||
Write => Write,
|
||||
RFSH_n => RFSH_n,
|
||||
HALT_n => HALT_n,
|
||||
WAIT_n => Wait_n,
|
||||
INT_n => INT_n,
|
||||
NMI_n => NMI_n,
|
||||
RESET_n => RESET_n,
|
||||
BUSRQ_n => BUSRQ_n,
|
||||
BUSAK_n => BUSAK_n,
|
||||
CLK_n => CLK_n,
|
||||
A => A,
|
||||
DInst => DI,
|
||||
DI => DI_Reg,
|
||||
DO => DO,
|
||||
MC => MCycle,
|
||||
TS => TState,
|
||||
IntCycle_n => IntCycle_n);
|
||||
|
||||
process (RESET_n, CLK_n)
|
||||
begin
|
||||
if RESET_n = '0' then
|
||||
RD_n <= '1';
|
||||
WR_n <= '1';
|
||||
IORQ_n <= '1';
|
||||
MREQ_n <= '1';
|
||||
DI_Reg <= "00000000";
|
||||
elsif CLK_n'event and CLK_n = '1' then
|
||||
if CLKEN = '1' then
|
||||
RD_n <= '1';
|
||||
WR_n <= '1';
|
||||
IORQ_n <= '1';
|
||||
MREQ_n <= '1';
|
||||
if MCycle = "001" then
|
||||
if TState = "001" or (TState = "010" and Wait_n = '0') then
|
||||
RD_n <= not IntCycle_n;
|
||||
MREQ_n <= not IntCycle_n;
|
||||
IORQ_n <= IntCycle_n;
|
||||
end if;
|
||||
if TState = "011" then
|
||||
MREQ_n <= '0';
|
||||
end if;
|
||||
else
|
||||
if (TState = "001" or TState = "010") and NoRead = '0' and Write = '0' then
|
||||
RD_n <= '0';
|
||||
IORQ_n <= not IORQ;
|
||||
MREQ_n <= IORQ;
|
||||
end if;
|
||||
if ((TState = "001") or (TState = "010")) and Write = '1' then
|
||||
WR_n <= '0';
|
||||
IORQ_n <= not IORQ;
|
||||
MREQ_n <= IORQ;
|
||||
end if;
|
||||
end if;
|
||||
if TState = "010" and Wait_n = '1' then
|
||||
DI_Reg <= DI;
|
||||
end if;
|
||||
end if;
|
||||
end if;
|
||||
end process;
|
||||
|
||||
end;
|
||||
Reference in New Issue
Block a user