Switch to the CC BY-NC-SA 4.0 License

Please note that COMMERCIAL USE OF THIS WORK IS PROHIBITED starting from this commit, except as stated in the README.

CHANGES.md

@@ -1,6 +1,6 @@
 ## CHANGES
 
-Any modifications to the Raemixx500 design and documentation made by any Licensee MUST be noted in this file, as per *section 3.4.b* of the [license](LICENSE.pdf).
+Any modifications to the Raemixx500 design and documentation made by any Licensee MUST be noted in this file.
 
 ### (Date) - (Author)
 (Description)

PRODUCT.md

@@ -1,14 +0,0 @@
-## Manufacture and distribution of Products
-
-Raemixx500 is Open Hardware licensed under the CERN OHL v. 1.2.
-
-Following is an excerpt from Section 4 of the [license](LICENSE.pdf) - **Manufacture and distribution of Products** - where *product* means *either an entire, or any part of a, device built using the Documentation or the modified Documentation*:
-
-> 4.1. The Licensee may manufacture or distribute *Products* always provided that, where such manufacture or distribution requires a licence under this Licence the Licensee provides to each recipient of such Products an easy means of accessing a copy of the Documentation or modified Documentation, as applicable, as set out in section 3.
-
-> 4.2. The Licensee is invited to inform any Licensor who has indicated his wish to receive this information about the type, quantity and dates of production of Products the Licensee has (had) manufactured
-
-This file contains a list of the contact point wishing to receive information about manufactured Products.
-
-### (Name) (E-Mail or other contact details)
-- SukkoPera <software@sukkology.net>

README.md

@@ -74,24 +74,18 @@ Every release is accompanied by its Bill Of Materials (BOM) file and any relevan
 ## License
 *(I am not sure I can claim any copyright on this, as the actual schematics this is based on belong to Commodore (or whoever has that right now, definitely not me). So the claim below is going to be more of a declaration of intent, in the sense that I would like that everything that uses my work stays open and free.)*
 
-The Rämixx500 documentation, including the design itself, is copyright © SukkoPera 2019-2020.
+The Rämixx500 documentation, including the design itself, is copyright © SukkoPera 2019-2021 and is licensed under the [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License](https://creativecommons.org/licenses/by-nc-sa/4.0/).
 
-Rämixx500 is Open Hardware licensed under the [CERN OHL v. 1.2](http://ohwr.org/cernohl).
+This documentation is distributed *as is* and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES whatsoever with respect to its functionality, operability or use, including, without limitation, any implied warranties OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE or infringement. We expressly disclaim any liability whatsoever for any direct, indirect, consequential, incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from business interruption or loss of data, regardless of the form of action or legal theory under which the liability may be asserted, even if advised of the possibility or likelihood of such damages.
 
-You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. This documentation is distributed *as is* and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES whatsoever with respect to its functionality, operability or use, including, without limitation, any implied warranties OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE or infringement. We expressly disclaim any liability whatsoever for any direct, indirect, consequential, incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from business interruption or loss of data, regardless of the form of action or legal theory under which the liability may be asserted, even if advised of the possibility or likelihood of such damages.
-
-A copy of the full license is included in file [LICENSE.pdf](LICENSE.pdf), please refer to it for applicable conditions. In order to properly deal with its terms, please see file [LICENSE_HOWTO.pdf](LICENSE_HOWTO.pdf).
-
-The contact points for information about manufactured Products (see section 4.2) are listed in file [PRODUCT.md](PRODUCT.md).
-
-Any modifications made by Licensees (see section 3.4.b) shall be recorded in file [CHANGES.md](CHANGES.md).
+Any modifications made by Licensees shall be recorded in file [CHANGES.md](CHANGES.md).
 
 The Documentation Location of the original project is https://github.com/SukkoPera/Raemixx500/.
 
 ## Selling the board
-**The license allows you to sell these boards**. I have nothing against that **as long as you do so at an "ethical" price**. I understand you want to make some money, but please note that you are getting this all for free. You had no development costs and you invested no time in this project. I did, and my desire is to allow everybody to have a board at a REASONABLE price, so please keep your margin low. I estimate that **having a few of these boards produced costs about 20€ per board** (with ENIG, gold plating and beveling the edge connector, don't cheat on that!), so let me add the following restriction: **if this board is sold at more than 30€ (or equivalent in your currency), 25% of your earning MUST be donated to a LEGITIMATE charity** of some kind, like curing cancer for example. This amount has been set in April 2020 and will be updated, should the value of the Euro vary significantly.
+Even though the license says that only *noncommercial* use of this work is permitted, I am allowing anybody to sell these boards **as long as you do so at an "ethical" price**. I understand you want to make some money, but please note that you are getting this all for free. You had no development costs and you invested no time in this project. I did, and my desire is to allow everybody to have a board at a REASONABLE price, so please keep your margin low. I estimate that **having a few of these boards produced costs about 25€ per board** (with ENIG, gold plating and beveling the edge connector, don't cheat on that!), so I'm putting **a price cap of 35€ (or equivalent in your currency)**. This amount has been set in May 2021 and will be updated, should the value of the Euro vary significantly. If you sell a significant number of these boards, I **strongly recommend to donate part of your earnings to a LEGITIMATE charity** of your choice. I am keen on research against cancer but feel free to pick whatever suits you best.
 
-Also, please **do not remove the credits, URL and license statement**. There is **no reason do so**, you have the right to sell this board, there is no need to pretend you got it somewhere else. Ironically, If you removed those, you'd lose that right as you'd be violating the license terms.
+Also, please **do not remove the credits, URL and license statement**. There is **no reason do so**, you are allowed to sell this board, there is no need to pretend you got it somewhere else.
 
 ## Support the Project
 If you want to support the project, you can order the boards from PCBWay through this link:

Raemixx500.kicad_pcb

@@ -1,4 +1,4 @@
-(kicad_pcb (version 20171130) (host pcbnew 5.1.6)
+(kicad_pcb (version 20171130) (host pcbnew 5.1.10)
 
   (general
     (thickness 1.6)
@@ -15,7 +15,7 @@
     (date 2020-05-02)
     (rev 1Bgit)
     (company SukkoPera)
-    (comment 4 "Licensed under CERN OHL v.1.2")
+    (comment 4 "Licensed under CC BY-NC-SA 4.0")
   )
 
   (layers
@@ -22814,7 +22814,7 @@
   (gr_text "B52/ROCK LOBSTER" (at 371.856 156.337) (layer F.SilkS) (tstamp 5EAFBEFD)
     (effects (font (size 2.6 2.7) (thickness 0.5)))
   )
-  (gr_text "A Tribute to the Greatest Computer\nof All Time\n\nLicensed under CERN OHL v.1.2\n\ngithub.com/SukkoPera/Raemixx500" (at 371.983 115.853443) (layer F.SilkS)
+  (gr_text "A Tribute to the Greatest Computer\nof All Time\n\nLicensed under CC BY-NC-SA 4.0\n\ngithub.com/SukkoPera/Raemixx500" (at 371.983 115.853443) (layer F.SilkS)
     (effects (font (size 1.3 1.3) (thickness 0.3)))
   )
   (gr_line (start 350.52 97.663) (end 350.52 136.906) (layer F.SilkS) (width 0.2) (tstamp 5EAFA0E2))

Raemixx500.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 ""
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Sheet
 S 1345 1405 1305 715 

audio.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 "PAULA PREFERS THE TRADITIONAL MODES"
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L PAULA:PAULA U3

cias.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 "RS232 AND PARALLEL PORT"
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L VIA_8520:VIA_8520 U7

clockdist.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 ""
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L 74ls258:74LS258 U33

cpu.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 "PROCESSOR AND OTHER USEFUL COMPONENTS"
 Comment2 "Derived from Commodore Schematic #312813, Rev. 1 - Sheet 2 of 10"
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L Device:R R114

expansion.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 ""
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L BUSEXP:BUSEXP P1

floppy.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 "FLOPPY STUFF"
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L GARY:GARY_5719 U5

power.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 "POWER AND DECOUPLING"
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L 74xx:74LS32 U37

ram.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 "MEMORY AND...WELL, I USED TO REMEMBER"
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 Wire Wire Line
 	8800 1250 8530 1250

rom.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 ""
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 Entry Wire Line
 	5300 4395 5200 4295

rtc.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 ""
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L MSM6242B:MSM6242B U9

terminators.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 ""
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 Entry Wire Line
 	2365 3795 2265 3695

trapdoor.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 ""
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L TRAPDOOR:TRAPDOOR P9

video.sch

@@ -11,7 +11,7 @@ Comp "SukkoPera"
 Comment1 "DENISE IS PRETTY MUCH INTO VIDEO..."
 Comment2 ""
 Comment3 ""
-Comment4 "Licensed under CERN OHL v.1.2"
+Comment4 "Licensed under CC BY-NC-SA 4.0"
 $EndDescr
 $Comp
 L DENISE:DENISE U4