Merge DIYglenn

Debugging/Code/Arduino/SelfService/README.md

@@ -0,0 +1,33 @@
+# Setup
+
+1. Copy AmsToMqttBridge\Code\Arduino\HanReader\src to Arduino\libraries
+2. Download the following libraries and put them in Arduino\libraries
+   - ESP8266WiFi
+   - PubSubClient
+   - ArduinoJson
+   
+The device will boot as an AP (Access Point) the first time it starts.
+Connect to the AP (ESP-AMS-MQTT) and browse to the Web page http://192.168.4.1/
+
+Fill inn the form on the Web page and hit 'Submit'
+The ESP will reboot and connect to your network, publishing it's Firmware version to the 'esp/ams/fw/version' topic.
+
+The ESP can be reset trough the topic 'esp/ams/reset' or by pulling GPIO 13 LOW.
+
+# Firmware Over The Air upgrade
+
+The ESP now supports FOTA upgrades. Compile your Arduino sketch to binary (Sketch > Export compiled binary)
+Upload the .bin file to a Web Server and create a version file.
+
+Example: 
+If your .bin file is named 'ams.bin', create a 'ams.version' in the same folder and write a version number different from the
+version published on the 'esp/ams/fw/version' topic.
+
+Then send the URL of the file, exluding the file ending, to the 'esp/ams/fw/update' topic like this:
+`mosquitto_pub -t 'esp/ams/fw/update' -m 'http://your.local.webserver/ams'` if the bin and version file is in the root folder.
+
+The ESP will publish upgrade information to the 'esp/ams/fw/info' topic.
+
+# Output
+
+All output is published on `esp/ams/#`