Added zip files to release resources, combined with flash script

.github/workflows/release.yml

@@ -45,6 +45,8 @@ jobs:
       run: pio lib install
     - name: PlatformIO run
       run: pio run
+    - name: Create zip files
+      run: /bin/sh scripts/mkzip.sh
     - name: Create Release
       id: create_release
       uses: actions/create-release@v1.0.0
@@ -55,6 +57,35 @@ jobs:
         release_name: Release ${{ github.ref }}
         draft: false
         prerelease: false
+
+    - name: Upload esp8266 zip to release
+      uses: actions/upload-release-asset@v1
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      with:
+        upload_url: ${{ steps.create_release.outputs.upload_url }}
+        asset_path: esp8266.zip
+        asset_name: ams2mqtt-esp8266-${{ steps.release_tag.outputs.tag }}.zip
+        asset_content_type: application/zip
+    - name: Upload esp32 zip to release
+      uses: actions/upload-release-asset@v1
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      with:
+        upload_url: ${{ steps.create_release.outputs.upload_url }}
+        asset_path: esp32.zip
+        asset_name: ams2mqtt-esp32-${{ steps.release_tag.outputs.tag }}.zip
+        asset_content_type: application/zip
+    - name: Upload esp32s2 zip to release
+      uses: actions/upload-release-asset@v1
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      with:
+        upload_url: ${{ steps.create_release.outputs.upload_url }}
+        asset_path: esp32s2.zip
+        asset_name: ams2mqtt-esp32s2-${{ steps.release_tag.outputs.tag }}.zip
+        asset_content_type: application/zip
+
     - name: Upload esp8266 binary to release
       uses: actions/upload-release-asset@v1
       env:
@@ -73,12 +104,12 @@ jobs:
         asset_path: .pio/build/esp32/firmware.bin
         asset_name: ams2mqtt-esp32-${{ steps.release_tag.outputs.tag }}.bin
         asset_content_type: application/octet-stream
-    - name: Upload esp32 partitions to release
+    - name: Upload esp32s2 binary to release
       uses: actions/upload-release-asset@v1
       env:
         GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
       with:
         upload_url: ${{ steps.create_release.outputs.upload_url }}
-        asset_path: .pio/build/esp32/partitions.bin
-        asset_name: ams2mqtt-esp32-partitions-${{ steps.release_tag.outputs.tag }}.bin
+        asset_path: .pio/build/esp32s2/firmware.bin
+        asset_name: ams2mqtt-esp32s2-${{ steps.release_tag.outputs.tag }}.bin
         asset_content_type: application/octet-stream

.gitignore

@@ -14,3 +14,4 @@ platformio-user.ini
 /web/test.html
 /sdkconfig
 /.tmp
+/*.zip

platformio.ini

@@ -7,45 +7,43 @@ lib_ignore = OneWire
 
 [env:esp8266]
 platform = espressif8266@3.2.0
+framework = arduino
 board = esp12e
 board_build.ldscript = eagle.flash.4m2m.ld
-framework = arduino
+build_flags = -D WEBSOCKET_DISABLED=1
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 extra_scripts =
     pre:scripts/addversion.py
     scripts/makeweb.py
-build_flags =
-    -D WEBSOCKET_DISABLED=1
 
 
 [env:esp32]
-platform = https://github.com/platformio/platform-espressif32.git#feature/arduino-upstream
-board = esp32dev
+platform = https://github.com/tasmota/platform-espressif32.git#v2.0.3
+platform_packages = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#2.0.2
 framework = arduino
+board = esp32dev
+board_build.f_cpu = 160000000L
+build_flags = -D WEBSOCKET_DISABLED=1
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 extra_scripts =
     pre:scripts/addversion.py
     scripts/makeweb.py
-build_flags =
-    -D WEBSOCKET_DISABLED=1
-board_build.f_cpu = 160000000L
 
 [env:esp32s2]
-platform = https://github.com/tasmota/platform-espressif32/releases/download/v3.4.1/Tasmota-platform-espressif32.zip
+platform = https://github.com/tasmota/platform-espressif32.git#v2.0.3
 platform_packages = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#2.0.2
+framework = arduino
 board = esp32dev
 board_build.mcu = esp32s2
 board_build.variant = esp32s2
 board_build.flash_mode = qio
 board_build.f_cpu = 160000000L
 board_build.f_flash = 40000000L
-framework = arduino
+build_flags = -D WEBSOCKET_DISABLED=1
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 extra_scripts =
     pre:scripts/addversion.py
     scripts/makeweb.py
-build_flags =
-    -D WEBSOCKET_DISABLED=1

scripts/esp32/flash.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+if [ -z "$1" ];then
+    echo "Usage: "
+    echo "  Flashing first time            :   $0 flash /dev/ttyUSB0"
+    echo "  When upgrading to new version  :   $0 upgrade /dev/ttyUSB0"
+    echo "    NOTE: Replace /dev/ttyUSB0 with correct port"
+    exit 1
+fi
+
+if [ -z "$2" ];then
+    echo "Please specify port"
+    exit 1
+fi
+
+esptool=`which esptool`
+if [ -z "$esptool" ];then
+    esptool=`which esptool.py`
+fi
+if [ -z "$esptool" ];then
+    if [ -f esptool.py ];then
+        esptool="esptool.py"
+    fi
+fi
+if [ -z "$esptool" ];then
+    echo "esptool.py not available to run following command: "
+    esptool="echo esptool.py"
+fi
+
+if [ "$1" = "flash" ];then
+    $esptool --chip esp32 --port $2 --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect \
+    0x1000 bootloader_dio_40m.bin \
+    0x8000 partitions.bin \
+    0xe000 boot_app0.bin \
+    0x10000 firmware.bin
+    exit $?
+elif [ "$1" = "upgrade" ];then
+    $esptool --chip esp32 --port $2 --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x10000 firmware.bin
+    exit $?
+fi

scripts/esp32/mkzip.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+env="esp32"
+build_dir=".pio/build/$env/"
+
+if [ ! -d $build_dir ];then
+    echo "No build directory"
+    exit 1
+fi
+
+cp ~/.platformio/packages/framework-arduinoespressif32/tools/sdk/$env/bin/bootloader_dio_40m.bin $build_dir
+cp ~/.platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin $build_dir
+chmod +x scripts/$env/flash.sh
+zip -j $env.zip $build_dir/*.bin scripts/$env/flash.sh

scripts/esp32s2/flash.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+if [ -z "$1" ];then
+    echo "Usage: "
+    echo "  Flashing first time            :   $0 flash /dev/ttyUSB0"
+    echo "  When upgrading to new version  :   $0 upgrade /dev/ttyUSB0"
+    echo "    NOTE: Replace /dev/ttyUSB0 with correct port"
+    exit 1
+fi
+
+if [ -z "$2" ];then
+    echo "Please specify port"
+    exit 1
+fi
+
+esptool=`which esptool`
+if [ -z "$esptool" ];then
+    esptool=`which esptool.py`
+fi
+if [ -z "$esptool" ];then
+    if [ -f esptool.py ];then
+        esptool="esptool.py"
+    fi
+fi
+if [ -z "$esptool" ];then
+    echo "esptool.py not available to run following command: "
+    esptool="echo esptool.py"
+fi
+
+if [ "$1" = "flash" ];then
+    $esptool --chip esp32s2 --port $2 --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect \
+    0x1000 bootloader_qio_40m.bin \
+    0x8000 partitions.bin \
+    0xe000 boot_app0.bin \
+    0x10000 firmware.bin
+    exit $?
+elif [ "$1" = "upgrade" ];then
+    $esptool --chip esp32s2 --port $2 --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x10000 firmware.bin
+    exit $?
+fi

scripts/esp32s2/mkzip.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+env="esp32s2"
+build_dir=".pio/build/$env/"
+
+if [ ! -d $build_dir ];then
+    echo "No build directory"
+    exit 1
+fi
+
+cp ~/.platformio/packages/framework-arduinoespressif32/tools/sdk/$env/bin/bootloader_qio_40m.bin $build_dir
+cp ~/.platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin $build_dir
+chmod +x scripts/$env/flash.sh
+zip -j $env.zip $build_dir/*.bin scripts/$env/flash.sh

scripts/esp8266/flash.sh

@@ -0,0 +1,31 @@
+#!/bin/sh
+
+if [ -z "$1" ];then
+    echo "Usage: "
+    echo "  Flashing first time            :   $0 flash /dev/ttyUSB0"
+    echo "  When upgrading to new version  :   $0 upgrade /dev/ttyUSB0"
+    echo "    NOTE: Replace /dev/ttyUSB0 with correct port"
+    exit 1
+fi
+
+if [ -z "$2" ];then
+    echo "Please specify port"
+    exit 1
+fi
+
+esptool=`which esptool`
+if [ -z "$esptool" ];then
+    esptool=`which esptool.py`
+fi
+if [ -z "$esptool" ];then
+    if [ -f esptool.py ];then
+        esptool="esptool.py"
+    fi
+fi
+if [ -z "$esptool" ];then
+    echo "esptool.py not available to run following command: "
+    esptool="echo esptool.py"
+fi
+
+$esptool --before default_reset --after hard_reset --chip esp8266 --port $2 --baud 115200 write_flash 0x0 firmware.bin
+exit $?

scripts/esp8266/mkzip.sh

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+env="esp8266"
+build_dir=".pio/build/$env/"
+
+if [ ! -d $build_dir ];then
+    echo "No build directory"
+    exit 1
+fi
+
+chmod +x scripts/$env/flash.sh
+zip -j $env.zip $build_dir/*.bin scripts/$env/flash.sh

scripts/mkzip.sh

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+find -name firmware.bin | while read firmware;do
+    dir=`dirname $firmware`
+    env=`basename $dir`
+    if [ -f scripts/$env/mkzip.sh ];then
+        echo "Building zip for env '$env'"
+        chmod +x scripts/$env/mkzip.sh 
+        scripts/$env/mkzip.sh
+    fi
+done