github.com/antonblanchard.microwatt
1
0
Fork 0
mirror of https://github.com/antonblanchard/microwatt.git synced 2026-01-27 12:22:13 +00:00
Code Releases Activity
Files
dbb137437c902b27f16136dbda9b024182c2aa33
antonblanchard.microwatt/fpga
History
Benjamin Herrenschmidt dbb137437c acorn: Add support for the Acorn CLE 215+ 
This is a NiteFury based PCIe M2 form-factor board originally
used for mining. It contains a speed grade 2 Artix 7 200T,
1GB of DDR3 and 32MB of flash.

The serial port is routed to pin 2 (RX) and 3 (TX) of the P2
connector (pin 1 is GND).

Note: Only 16MB of flash is currently usable until code is added
to configure the flash controller to use 4-bytes address commands
on that part.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-08-07 15:42:07 +10:00
..
acorn-cle-215.xdc
acorn: Add support for the Acorn CLE 215+
2020-08-07 15:42:07 +10:00
arty_a7.xdc
uart: Import and hook up opencore 16550 compatible UART
2020-06-24 09:53:46 +10:00
clk_gen_bypass.vhd
Fix clk_gen_bypass
2019-10-13 14:41:53 +11:00
clk_gen_ecp5.vhd
Add PLL for ECP5 device
2020-07-07 22:28:58 +10:00
clk_gen_mcmm.vhd
Improve PLL/MMCM clocks configuration
2019-09-30 13:57:36 +10:00
clk_gen_plle2.vhd
acorn: Add support for the Acorn CLE 215+
2020-08-07 15:42:07 +10:00
cmod_a7-35.xdc
Add SPI configuration to Xilinx constraint files
2019-12-09 16:12:37 +11:00
firmware.hex
Add a few more FPGA related files
2019-08-23 16:23:53 +10:00
hello_world.hex
hello_world: Use new headers and frequency from syscon
2020-05-08 21:06:16 +10:00
LICENSE
Initial import of microwatt
2019-08-22 16:46:13 +10:00
main_bram.vhdl
Fix some ghdlsynth issues with fpga_bram
2020-01-11 14:34:25 +11:00
nexys_a7.xdc
Add SPI configuration to Xilinx constraint files
2019-12-09 16:12:37 +11:00
nexys-video.xdc
spi: Add SPI Flash controller
2020-06-13 00:01:48 +10:00
pp_fifo.vhd
pp_fifo: Fix full fifo losing all data on simultaneous push & pop
2020-05-15 20:49:09 +10:00
pp_soc_uart.vhd
uart: Remove combinational loops on ack and stall signal
2020-06-13 11:38:34 +10:00
pp_utilities.vhd
Initial import of microwatt
2019-08-22 16:46:13 +10:00
soc_reset_tb.vhdl
Exit cleanly from testbench on success
2020-05-20 16:07:13 +10:00
soc_reset.vhdl
soc_reset: Use counters, add synchronizers
2020-05-16 12:42:58 +10:00
top-acorn-cle-215.vhdl
acorn: Add support for the Acorn CLE 215+
2020-08-07 15:42:07 +10:00
top-arty.vhdl
litedram: l2: Add support for more geometries
2020-07-08 16:47:30 +10:00
top-generic.vhdl
uart: Make 16550 the default
2020-06-26 08:17:18 +10:00
top-nexys-video.vhdl
litedram: l2: Add support for more geometries
2020-07-08 16:47:30 +10:00