Paul Mackerras 5d85ede97d dcache: Implement load-reserve and store-conditional instructions ...

This involves plumbing the (existing) 'reserve' and 'rc' bits in
the decode tables down to dcache, and 'rc' and 'store_done' bits
from dcache to writeback.

It turns out that we had 'RC' set in the 'rc' column for several
ordinary stores and for the attn instruction.  This corrects them
to 'NONE', and sets the 'rc' column to 'ONE' for the conditional
stores.

In writeback we now have logic to set CR0 when the input from dcache
has rc = 1.

In dcache we have the reservation itself, which has a valid bit
and the address down to cache line granularity.  We don't currently
store the reservation length.  For a store conditional which fails,
we set a 'cancel_store' signal which inhibits the write to the
cache and prevents the state machine from starting a bus cycle or
going to the STORE_WAIT_ACK state.  Instead we set r1.stcx_fail
which causes the instruction to complete in the next cycle with
rc=1 and store_done=0.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

2020-02-28 08:09:08 +11:00

12 KiB

Raw Blame History

View Raw