mirror of
https://github.com/kalymos/PsNee.git
synced 2026-04-20 01:23:28 +00:00
Cleaning the selection area
Redesign of the selection area, and addition of the SCPH_hyma mode equivalent to the legacy mode with the difference of a hysteresis of 25
This commit is contained in:
kalymos
@@ -1,94 +1,108 @@
|
||||
// PSNee-8.7.0
|
||||
|
||||
//------------------------------------------------------------------------------------------------
|
||||
// Select your console
|
||||
// Console selection
|
||||
//------------------------------------------------------------------------------------------------
|
||||
|
||||
//Legacy mode works the same as V7.
|
||||
//No BIOS patching.
|
||||
|
||||
//All NTSC-U/C SCPH_xxx1, all PAL FAT models SCPH_xxx2, SCPH_103. It's 0.5 seconds longer than choosing a specific region.
|
||||
//On models with problematic CD players the HYSTERESIS_MAX setting may be a little short.
|
||||
// SCPH model number | common noun | HYSTERESIS_MAX
|
||||
//-------------------------------------------------------------------------------------------------
|
||||
//#define SCPH_xxx1 | NTSC-U/C FAT | 25
|
||||
//#define SCPH_xxx2 | PAL FAT | 25
|
||||
//#define SCPH_xxx3 | NTSC-Asia FAT | 25
|
||||
//#define SCPH_101 | NTSC-U/C | 15
|
||||
//#define SCPH_103 | NTSC-Asia | 15
|
||||
|
||||
//#define SCPH_xxxx
|
||||
//Models that require a BIOS patch.
|
||||
|
||||
//-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
|
||||
|
||||
//Here the regions are specified. No BIOS patching needed.
|
||||
|
||||
//Here the setting of HYSTERESIS_MAX goes up to 20.
|
||||
|
||||
//#define SCPH_xxx1 // NTSC-U/C FAT.
|
||||
//#define SCPH_xxx2 // PAL FAT.
|
||||
//#define SCPH_xxx3 // NTSC-Asia FAT.
|
||||
|
||||
//Here the HYSTERESIS_MAX setting is 15.
|
||||
|
||||
//#define SCPH_101 // NTSC-U/C.
|
||||
//#define SCPH_103 // NTSC-Asia.
|
||||
|
||||
//_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
|
||||
|
||||
//And all models that require a BIOS patch.
|
||||
// Adres pin
|
||||
// SCPH model number | Data pin | 32-pin BIOS | 40-pin BIOS | BIOS ver
|
||||
//-------------------------------------------------------------------------------------------------
|
||||
//#define SCPH_102 | DX - D0 | AX - A7 | | 4.4e, 4.5e
|
||||
//#define SCPH_102A | ! works in progress DX - D2, AX - A18. | 4.4e, 4.5e
|
||||
//#define SCPH_100 | DX - D0 | AX - A7 | | 4.3j
|
||||
//#define SCPH_7000 - 9000 | DX - D0 | AX - A7 | | 4.0j - CRC EC541CD0
|
||||
//#define SCPH_5500 | DX - D0 | AX - A5 | | 3.0j - CRC FF3EEB8C
|
||||
//#define SCPH_3500 - 5000 | DX - D0 | AX - A5 | AX - A4 | 2.2j - CRC 24FC7E17, 2.1j - CRC BC190209
|
||||
//#define SCPH_3000 | DX - D5 | AX - A7, AY - A8 | AX - A6, AY - A7 | 1.1j - CRC 3539DEF6
|
||||
//#define SCPH_1000 | DX - D5 | AX - A7, AY - A8 | AX - A6, AY - A7 | 1.0j - CRC 3B601FC8
|
||||
|
||||
//XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
|
||||
// Attention!
|
||||
// If a BIOS checksum is specified, it is more important than the SCPH model number!
|
||||
//XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
#define SCPH_102 // DX - D0, AX - A7. BIOS ver. 4.4e, CRC 0BAD7EA9 | 4.5e, CRC 76B880E5
|
||||
//#define SCPH_102A // ! works in progress DX - D2, AX - A18. BIOS ver. 4.4e, CRC 0BAD7EA9 | 4.5e, CRC 76B880E5
|
||||
//#define SCPH_100 // DX - D0, AX - A7. BIOS ver. 4.3j, CRC F2AF798B
|
||||
//#define SCPH_7000_9000 // DX - D0, AX - A7. BIOS ver. 4.0j, CRC EC541CD0
|
||||
//#define SCPH_5500 // DX - D0, AX - A5. BIOS ver. 3.0j, CRC FF3EEB8C
|
||||
//#define SCPH_3500_5000 // DX - D0, for 40-pin BIOS: AX - A4, for 32-pin BIOS: AX - A5. BIOS ver. 2.2j, CRC 24FC7E17 | 2.1j, CRC BC190209
|
||||
//#define SCPH_3000 // DX - D5, for 40-pin BIOS: AX - A6, AY - A7, for 32-pin BIOS: AX - A7, AY - A8. BIOS ver. 1.1j, CRC 3539DEF6
|
||||
//#define SCPH_1000 // DX - D5, for 40-pin BIOS: AX - A6, AY - A7, for 32-pin BIOS: AX - A7, AY - A8. BIOS ver. 1.0j, CRC 3B601FC8
|
||||
//-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
|
||||
|
||||
//Legacy mode works the same as V7. NTSC-U/C SCPH_xxx1, PAL FAT models SCPH_xxx2, NTSC-Asia SCPH_xxx3.
|
||||
|
||||
// | HYSTERESIS_MAX |
|
||||
//--------------------------------------------------------------
|
||||
//#define SCPH_xxxx | 15 | Legacy
|
||||
//#define SCPH_hyma | 25 | For models with problematic CD players
|
||||
|
||||
//------------------------------------------------------------------------------------------------
|
||||
// Select your chip
|
||||
// MCU selection
|
||||
//------------------------------------------------------------------------------------------------
|
||||
|
||||
|
||||
#define ATmega328_168
|
||||
//#define ATmega32U4_16U4
|
||||
//#define ATtiny85_45_25
|
||||
|
||||
/*
|
||||
Fuses:
|
||||
ATmega - H: DF, L: EE, E: FD.
|
||||
ATtiny - H: DF, L: E2; E: FD.
|
||||
|
||||
Pinout Arduino:
|
||||
VCC-3.5v, PinGND-GND,
|
||||
D2-BIOS AX (Only for Bios patch)
|
||||
D3-BIOS AY (Only for BIOS ver. 1.0j-1.1j)
|
||||
D4-BIOS DX (Only for Bios patch)
|
||||
D5-Switch* (Optional for Bios patch)
|
||||
D6-SQCK
|
||||
D7-SUBQ
|
||||
D8-DATA
|
||||
D9-GATE_WFCK
|
||||
RST-RESET* (Only for JAP_FAT)
|
||||
|
||||
Pinout ATtiny:
|
||||
Pin1-RESET
|
||||
Pin2-LED
|
||||
Pin3-WFCK
|
||||
Pin4-GND
|
||||
Pin5-SQCK (MOSI)
|
||||
Pin6-SUBQ (MISO)
|
||||
Pin7_DATA (SCK)
|
||||
Pin8-VCC
|
||||
*/
|
||||
|
||||
// MCU | Arduino
|
||||
//--------------------------------------------------------------
|
||||
//#define ATmega328_168 | Nano, Pro Mini, Uno
|
||||
//#define ATmega32U4_16U4 | Micro, Pro Micro
|
||||
//#define ATtiny85_45_25 | ATtiny
|
||||
|
||||
//------------------------------------------------------------------------------------------------
|
||||
// Options
|
||||
//------------------------------------------------------------------------------------------------
|
||||
|
||||
//#define LED_RUN // Turns on the LED when injections occur. D13 for Arduino, ATtiny add a led between PB3 (pin 2) and gnd with a 1k resistor in series, ATmega32U4 (Pro Micro) add a led between PB6 (pin 10) and gnd with a 1k resistor in series
|
||||
//#define PATCH_SWITCH // Enables hardware support for disabling BIOS patching. Useful in rare cases where the BIOS patch prevents the playback of original games
|
||||
#define LED_RUN // Turns on the LED when injections occur.
|
||||
// D13 for Arduino, ATtiny add a led between PB3 (pin 2) and gnd with a 1k resistor in series, ATmega32U4 (Pro Micro) add a led between PB6 (pin 10) and gnd with a 1k resistor in series.
|
||||
|
||||
//#define PATCH_SWITCH // Enables hardware support for disabling BIOS patching.
|
||||
// With SCPH_7000 - 9000 models, Bios 4.0j, the bios patch prevents reading memory cards in the console interface, and in some cases can cause a crash.
|
||||
// In rare cases where the BIOS patch prevents the playback of original games.
|
||||
|
||||
//------------------------------------------------------------------------------------------------
|
||||
// Fuses, Pinout
|
||||
//------------------------------------------------------------------------------------------------
|
||||
|
||||
/*
|
||||
|
||||
Fuses
|
||||
MCU | High | Low | Extended
|
||||
--------------------------------------------------
|
||||
ATmega | DF | EE | FD
|
||||
ATtiny | DF | E2 | FD
|
||||
|
||||
Pinout
|
||||
Arduino | PSNee |
|
||||
---------------------------------------------------
|
||||
VCC | VCC |
|
||||
GND | GND |
|
||||
RST | RESET | Only for JAP_FAT
|
||||
D2 | BIOS AX | Only for Bios patch
|
||||
D3 | BIOS AY | Only for BIOS patch ver, 1.0j, 1.1j
|
||||
D4 | BIOS DX | Only for Bios patch
|
||||
D5 | SWITCH | Optional for disabling Bios patch
|
||||
D6 | SQCK |
|
||||
D7 | SUBQ |
|
||||
D8 | DATA |
|
||||
D9 | GATE_WFCK |
|
||||
D13 - D10 | LED | D10 for ATmega32U4_16U4
|
||||
|
||||
ATtiny | PSNee | ISP
|
||||
---------------------------------------------------
|
||||
Pin1 | | RESET
|
||||
Pin2 | LED |
|
||||
Pin3 | WFCK |
|
||||
Pin4 | GND | GND
|
||||
Pin5 | SQCK | MOSI
|
||||
Pin6 | SUBQ | MISO
|
||||
Pin7 | DATA | SCK
|
||||
Pin8 | VCC | VCC
|
||||
|
||||
*/
|
||||
|
||||
//------------------------------------------------------------------------------------------------
|
||||
// pointer and variable section
|
||||
|
||||
@@ -117,7 +117,7 @@ const char region[3] = {'e', 'e', 'e'};
|
||||
const char region[3] = {'i', 'i', 'i'};
|
||||
#endif
|
||||
|
||||
#ifdef SCPH_xxxx
|
||||
#if defined(SCPH_xxxx) || defined(SCPH_hyma)
|
||||
const char region[3] = {'a', 'e', 'i'};
|
||||
#endif
|
||||
|
||||
@@ -126,18 +126,18 @@ const char region[3] = {'a', 'e', 'i'};
|
||||
#define HYSTERESIS_MAX 15
|
||||
#endif
|
||||
|
||||
#if defined(SCPH_xxx1) || defined(SCPH_xxx2) || defined(SCPH_xxx3) || defined(SCPH_7000_9000) || defined(SCPH_5500) || defined(SCPH_3500_5000) || defined(SCPH_3000) || defined(SCPH_1000)
|
||||
#if defined(SCPH_xxx1) || defined(SCPH_xxx2) || defined(SCPH_xxx3) || defined(SCPH_7000_9000) || defined(SCPH_5500) || defined(SCPH_3500_5000) || defined(SCPH_3000) || defined(SCPH_1000) || defined(SCPH_hyma)
|
||||
#define HYSTERESIS_MAX 25
|
||||
#endif
|
||||
|
||||
#if !defined(SCPH_xxx1) && !defined(SCPH_xxx2) && !defined(SCPH_xxx3) && !defined(SCPH_103) && \
|
||||
!defined(SCPH_102) && !defined(SCPH_101) && !defined(SCPH_100) && !defined(SCPH_7000_9000) && \
|
||||
!defined(SCPH_5500) && !defined(SCPH_3500_5000) && !defined(SCPH_3000) && \
|
||||
!defined(SCPH_1000) && !defined(SCPH_xxxx) && !defined(SCPH_102A)
|
||||
!defined(SCPH_1000) && !defined(SCPH_xxxx) && !defined(SCPH_102A) && !defined(SCPH_hyma)
|
||||
#error "Console not selected! Please uncoment #define with SCPH model number."
|
||||
#elif !(defined(SCPH_xxx1) ^ defined(SCPH_xxx2) ^ defined(SCPH_xxx3) ^ defined(SCPH_103) ^ \
|
||||
defined(SCPH_102) ^ defined(SCPH_101) ^ defined(SCPH_100) ^ defined(SCPH_7000_9000) ^ \
|
||||
defined(SCPH_5500) ^ defined(SCPH_3500_5000) ^ defined(SCPH_3000) ^ \
|
||||
defined(SCPH_1000) ^ defined(SCPH_xxxx) ^ defined(SCPH_102A))
|
||||
defined(SCPH_1000) ^ defined(SCPH_xxxx) ^ defined(SCPH_102A) ^ defined(SCPH_hyma))
|
||||
#error "May be selected only one console! Please check #define with SCPH model number."
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user