mirror of
https://github.com/rcornwell/sims.git
synced 2026-02-19 22:06:05 +00:00
13c60a6164
SEL32: Update sel32_chan.c to correct handling of IOCL queue prcessing. SEL32: Add sel32_lpr description and help functions. SEL32: Remove lpr output assignment in diags.ini. SEL32: Terminate WAITQ entries when CPU goes to wait state.
110 lines
5.8 KiB
Markdown
110 lines
5.8 KiB
Markdown
|
|
# SEL32 Concept/32 Simulator
|
|
|
|
This is a working simulator for the SEL Concept/32 computer. The
|
|
current version is for the SEL 32/27, 32/67, 32/77, 32/87, 32/97, V6,
|
|
and V9 computers. All of the processors except for the 32/77 can run
|
|
the Gould diags. Operational support for the 32/77 computers may be
|
|
added in the future.
|
|
|
|
# SEL Concept/32
|
|
|
|
This simulator is capable of running UTX2.1A, UTX2.1B, MPX 1.5F, and a
|
|
test version of MPX 3.4. It is capable of creating a disk image for the
|
|
O/S from a UTX or MPX SDT tape. The disk image can be booted, initialized,
|
|
and can run many of the UTX and MPX utilities and programs. Ethernet is
|
|
supported on UTX and may be added to MPX in the future. Eight terminals
|
|
can be used to access MPX or UTX via Telnet port 4747. The sumulator has
|
|
support for excess 64 floating point arithmetic and passes the 32/27 and
|
|
32/67 FP diags.
|
|
|
|
The sim32disk.gz file is a prebuilt MPX 1.5F system disk. It can be
|
|
uncompressed and booted with the sel32.27.sim32.disk.ini initialization
|
|
file. The sim32sdt.tap.gz file can also be uncompressed and started with
|
|
the sel32.27.sim32.tape.ini initialization file to do a sdt install to
|
|
disk from tape. There are three test versions of UTX. Utxtest1a.ini,
|
|
utxtest1b.ini, utxtest1c.ini are three initialization files to build a
|
|
UTX 2.1A system. Utxtest1a.ini builds and loads the root filesystem on
|
|
/dev/dk0a. Utxtest1b.ini boots the new root file system from disk and
|
|
builds the usr file system on /dev/dk0d. Utxtest1c.ini boots the UTX
|
|
system from disk and enters multi-user mode. Utxtest2[a-c].ini files
|
|
do the same thing for UTX 2.1B. Utxscsi[a-c].ini builds a MFP SCSI disk
|
|
UTX 2.1B system. These files are only available from my sims project at
|
|
https://github.com/AZBevier/sims. A MPX 3.X test version will be added
|
|
in the future when testing is complete.
|
|
|
|
Available tap tools in taptools directory:
|
|
./taptools - set of tools to work with .tap formatted tapes. Also tools
|
|
to convert between MPX and UNIX file formats. See README
|
|
file and source for descriptions.
|
|
|
|
Available disk images:
|
|
sim32disk.gz - bootable 300mb disk with MPX1.5F installed. Unzip before
|
|
any attempt to use it. Use sel32.27.sim32.disk.ini command
|
|
file to start MPX 1.5. Type "./sel32 sel32.27.sim32.disk.ini"
|
|
|
|
Available configuration SDT tapes:
|
|
sim32sdt.tap - MPX 1.5f user SDT install tape. Uses 300mb disk, IOP 8-line
|
|
serial terminals via telnet port 4747. Line printer, 4 mag
|
|
tapes and console terminal. Terminal wakeup chan is ^G and
|
|
console wakeup chars are @@A. Install using TSM from console
|
|
after exiting opcom. Use filemgr to restore files from tape.
|
|
|
|
TSM> A3 IN=M91000,TAP
|
|
TSM> A4 SLO=UT
|
|
TSM> FILEMGR
|
|
FIL> RESTORE
|
|
FIL> X
|
|
|
|
Available Level One Diagnostic boot tape in tests directory:
|
|
diag.ini - command file to start diags. Type "./sel32 tests/diag.ini"
|
|
diag.tap - bootable level one diagnostic tape w/auto testing.
|
|
Set cpu type to 32/27, 32/67, 32/87, 32/97, V6 or V9. All
|
|
cpu models now run all diagnostics provided on the
|
|
diagnostic tape. Running DEXP stand alone causes input
|
|
to stop after a few characters are entered. More testing
|
|
is still required.
|
|
|
|
CV.CSL - Firmware control diag. Disabled in auto testing.
|
|
CV.CP1 - CPU diag part 1 runs OK.
|
|
CV.CP2 - CPU diag part 2 runs OK.
|
|
CV.CP3 - CPU diag part 3 runs OK.
|
|
CV.EAD - Effective address diag runs OK.
|
|
CV.BRD - Base register instruction diag runs OK, except 32/27.
|
|
CV.INT - Interrupt diag runs OK.
|
|
CV.TRP - Traps diag runs OK.
|
|
CV.CMD - Cache/Shadow diag. Disabled in auto testing.
|
|
CN.MMM - Non virtual memory diag runs OK.
|
|
VM.MMM - Virtual memory diag for V6 & V9 runs OK.
|
|
CV.IPT - IPU trap diag. Disabled in auto testing.
|
|
CV.CSD - WCS read/write trap diag. Disabled in auto testing.
|
|
CV.CON - Operators Console runs all tests for all CPUs.
|
|
CV.DXP - Diagnostic executive for level 2 diags. OK in batch.
|
|
67.FPT - Level two floating point diag runs under DXP OK.
|
|
CV.ITD - Level two interval timer diag runs under DXP OK.
|
|
|
|
Set GPR[0] = 0xffffffff before booting from tape to disable the
|
|
auto test and go to the Diagnostic Overlay Loader (DOL>) prompt.
|
|
Testing is extremely difficult without any source for the
|
|
diagnostics. Updates to follow as tests are corrected.
|
|
|
|
Available UTX-21a install tape for testing:
|
|
utxtest1a.ini command file to start UTX install tape. "./sel32 utxtest1a.ini"
|
|
utx21a1.tap bootable UTX install tape for testing basemode. The current
|
|
V6 & V9 will boot UTX into single/multi user mode. You can run
|
|
the full set of the commands that are on the installation tapes.
|
|
Prep, the disk preparation UTX program, can format a disk
|
|
drive. Other file systems can be created and saves restored.
|
|
All basemode instructions have been tested with the CV.BRD diag.
|
|
The virtual memory has been fully tested with the VM.MMM diag.
|
|
|
|
Other MPX verions support:
|
|
I am still looking for an MPX 3.X user or master SDT tape. I have
|
|
much of the source, but no loadable code to create a bootable system.
|
|
Please keep looking for anyone who can provide these tapes or a
|
|
disk image of a bootable MPX3.X system.
|
|
|
|
James C. Bevier
|
|
04/14/2021
|
|
|