VAX Unibus Systems: Optionally run diagnostics with uncalibrated clock

- uncalibrated clock mode executes at a precisely specified instruction
  rate relative to pseudo wall clock time independent of the host
  computer's speed or other loads on the host system.
- Provide additional failure state if/when diagnostics fail.

VAX/tests/vax-diag_test.ini

@@ -6,6 +6,11 @@
 :: if the script is invoked with -v as a parameter, verbose 
 :: diagnostic output will be produced.
 ::
+:: Default execution will run at a simulated pseudo speed reflecting
+:: the speed of the original system being simulated.  If the script
+:: is invoked with a -c as a parameter, diagnostics will be run
+:: at full speed with a calibrated clock.
+::
 :: The related diagnostic files must be located in the same directory 
 :: as this procedure.
 ::
@@ -23,9 +28,13 @@ set on
 on error ignore
 on runtime echof "\r\n*** Test Runtime Limit %SIM_RUNLIMIT% %SIM_RUNLIMIT_UNITS% Exceeded after running %SIM_RUNTIME% %SIM_RUNTIME_UNITS% ***\n"; exit 1
 
+:NEXT_ARG
 set env DIAG_QUIET_MODE=0
-if ("%1" == "-v") set console notelnet
-else set -qu console telnet=localhost:65432,telnet=buffered; set env -a DIAG_QUIET_MODE=1
+if ("%1" == "-v") set console notelnet;shift
+else set -qu console telnet=localhost:65432,telnet=buffered=1048576; set env -a DIAG_QUIET_MODE=1
+set env DIAG_UNCALIBRATED_CLOCK=1
+if ("%1" == "-c") set env DIAG_UNCALIBRATED_CLOCK=0;shift
+if ("%1" != "") goto NEXT_ARG
 goto DIAG_%SIM_BIN_NAME%
 
 :DIAG_MICROVAX2
@@ -85,63 +94,68 @@ goto %SIM_BIN_NAME%
 
 :VAX730
 # VAX 11/730 Diagnostic Supervisor Setup for EVKAB/C/D/E
+set env CPU_SPEED_FACTOR=300
 expect "DS> " send "ATTACH KA730 HUB KA0 no 0 0 2048 no no\r"; go -q
 expect "DS> " send "ATTACH DW730 HUB DW0\r"; go -q
 call Common
-call do_test EVKAB "VAX Basic Instructions Exerciser"
-call do_test EVKAC "VAX Floating Point Instructions Exerciser" /PASSES=2
-call do_test EVKAD "VAX Compatibility Mode Instructions Exerciser"
-#call do_test EVKAE "VAX Privileged Architecture Exerciser"
+call do_test EVKAB "VAX Basic Instructions Exerciser" "" TRACE
+call do_test EVKAC "VAX Floating Point Instructions Exerciser" /PASSES=2 TRACE
+call do_test EVKAD "VAX Compatibility Mode Instructions Exerciser" "" TRACE
+#call do_test EVKAE "VAX Privileged Architecture Exerciser" /PASSES=1 TRACE
 echof "\n*** All Diagnostic Supervisor tests PASSED after running for %SIM_RUNTIME% %SIM_RUNTIME_UNITS% ***\n"
 exit 0
 
 :VAX750
 # VAX 11/750 Diagnostic Supervisor Setup for EVKAB/C/D/E
+set env CPU_SPEED_FACTOR=600
 expect "DS> " send "ATTACH KA750 CMI KA0 yes yes yes 0 0\r"; go -q
 expect "DS> " send "ATTACH DW750 CMI DW0 8\r"; go -q
 call Common
-call do_test EVKAB "VAX Basic Instructions Exerciser"
-call do_test EVKAC "VAX Floating Point Instructions Exerciser" /PASSES=2
-call do_test EVKAD "VAX Compatibility Mode Instructions Exerciser"
-#call do_test EVKAE "VAX Privileged Architecture Exerciser"
+call do_test EVKAB "VAX Basic Instructions Exerciser" "" 
+call do_test EVKAC "VAX Floating Point Instructions Exerciser" /PASSES=2 
+call do_test EVKAD "VAX Compatibility Mode Instructions Exerciser" "" TRACE
+#call do_test EVKAE "VAX Privileged Architecture Exerciser" /PASSES=1 TRACE
 echof "\n*** All Diagnostic Supervisor tests PASSED after running for %SIM_RUNTIME% %SIM_RUNTIME_UNITS% ***\n"
 exit 0
 
 :VAX780
 # VAX 11/780 Diagnostic Supervisor Setup for EVKAB/C/D/E
+set env CPU_SPEED_FACTOR=1000
 expect "DS> " send "ATTACH KA780 SBI KA0 yes yes 0 0\r"; go -q
 expect "DS> " send "ATTACH DW780 SBI DW0 3 5\r"; go -q
 call Common
-call do_test EVKAB "VAX Basic Instructions Exerciser"
-call do_test EVKAC "VAX Floating Point Instructions Exerciser" /PASSES=2
-call do_test EVKAD "VAX Compatibility Mode Instructions Exerciser"
-#call do_test EVKAE "VAX Privileged Architecture Exerciser"
+call do_test EVKAB "VAX Basic Instructions Exerciser" "" TRACE
+call do_test EVKAC "VAX Floating Point Instructions Exerciser" /PASSES=2 TRACE
+call do_test EVKAD "VAX Compatibility Mode Instructions Exerciser" "" TRACE
+#call do_test EVKAE "VAX Privileged Architecture Exerciser" /PASSES=1 TRACE
 echof "\n*** All Diagnostic Supervisor tests PASSED after running for %SIM_RUNTIME% %SIM_RUNTIME_UNITS% ***\n"
 exit 0
 
 :VAX8200
 # VAX 8200 Diagnostic Supervisor Setup for EVKAB/C/D/E
+set env CPU_SPEED_FACTOR=900
 expect "DS> " send "ATTACH KA820 HUB KA0 4096 0\r"; go -q
 expect "DS> " send "ATTACH DWBUA HUB DW0 4 5\r"; go -q
 # VAX 8200 simulates the floating point accelerator which then 
 # inspires tests to use it.  This takes more time.
 set runlimit 2000M instructions
 call Common 
-call do_test EVKAB "VAX Basic Instructions Exerciser"
-call do_test EVKAC "VAX Floating Point Instructions Exerciser" /PASSES=2
-#call do_test EVKAE "VAX Privileged Architecture Exerciser"
+call do_test EVKAB "VAX Basic Instructions Exerciser" "" TRACE
+call do_test EVKAC "VAX Floating Point Instructions Exerciser" /PASSES=2 TRACE
+#call do_test EVKAE "VAX Privileged Architecture Exerciser" /PASSES=1 TRACE
 echof "\n*** All Diagnostic Supervisor tests PASSED after running for %SIM_RUNTIME% %SIM_RUNTIME_UNITS% ***\n"
 exit 0
 
 :VAX8600
 # VAX 8600 Diagnostic Supervisor Setup for EVKAB/C/D/E
+set env CPU_SPEED_FACTOR=4000
 expect "DS> " send "ATTACH KA780 ABUS KA0 yes yes 0 0\r"; go -q
 expect "DS> " send "ATTACH DW780 ABUS DW0 3 5\r"; go -q
 call Common
-call do_test EVKAB "VAX Basic Instructions Exerciser"
-call do_test EVKAC "VAX Floating Point Instructions Exerciser"
-call do_test EVKAD "VAX Compatibility Mode Instructions Exerciser"
-#call do_test EVKAE "VAX Privileged Architecture Exerciser"
+call do_test EVKAB "VAX Basic Instructions Exerciser" "" TRACE
+call do_test EVKAC "VAX Floating Point Instructions Exerciser" "" TRACE
+call do_test EVKAD "VAX Compatibility Mode Instructions Exerciser" "" TRACE
+#call do_test EVKAE "VAX Privileged Architecture Exerciser" /PASSES=1 TRACE
 echof "\n*** All Diagnostic Supervisor tests PASSED after running for %SIM_RUNTIME% %SIM_RUNTIME_UNITS% ***\n"
 exit 0
 
@@ -151,6 +165,7 @@ expect "DS> " send "ATTACH RA81 DUA DUA0\r"; go -q
 expect "DS> " send "SET LOAD DUA0:[SYSMAINT]\r"; go -q
 expect "DS> " send "SELECT KA0\r"; go -q
 expect "DS> "
+if (("%DIAG_UNCALIBRATED_CLOCK%") && ("%CPU_SPEED_FACTOR%" != "")) set CLOCK NOCALIBRATE=%CPU_SPEED_FACTOR%K
 boot -q RQ0 /R5:10
 #set todr debug
 #set tmr debug
@@ -165,18 +180,22 @@ set env DIAG_DESC=%2
 set env -a DIAG_ERRORS=1
 noexpect
 if (SIM_REGEX_TYPE == "") echof "Missing Regular Expression support - skipping %DIAG_TEST% test\n"; exit 0
+if (DIAG_QUIET_MODE) echof "\nRunning - %DIAG_DESC% %DIAG_TEST% starting after %SIM_RUNTIME% %SIM_RUNTIME_UNITS%\n"
 expect -r "Hard error" go -q
-expect -r "Pass 1, test ([0-9][0-9]*), subtest ([0-9][0-9]*), error ([0-9][0-9]*)," set env -a DIAG_ERRORS=_EXPECT_MATCH_GROUP_3; return
+expect -r "Pass (d+), test ([0-9][0-9]*), subtest ([0-9][0-9]*), error ([0-9][0-9]*)," set env -a DIAG_ERRORS=_EXPECT_MATCH_GROUP_4; return
 expect -r "System fatal error while testing" go -q
 expect -r "\.\. End of run, ([0-9][0-9]*) (error|errors) detected, pass count is [0-9][0-9]*," set env -a DIAG_ERRORS=_EXPECT_MATCH_GROUP_1; go -q
 expect "DS> "
-if (DIAG_QUIET_MODE) echof "\nRunning - %DIAG_DESC% %DIAG_TEST% starting after %SIM_RUNTIME% %SIM_RUNTIME_UNITS%\n"
+if ("%4" != "") expect "DS> "; send "SET FLAGS TRACE\r"; go -q
 send "RUN %DIAG_TEST%%3\r"
 go -q
 if (DIAG_ERRORS > 0) goto show_log
 if (DIAG_QUIET_MODE) echof "\n*** PASSED - %DIAG_DESC% %DIAG_TEST% after running for %SIM_RUNTIME% %SIM_RUNTIME_UNITS%\n"
 return
 :show_log
+expect "DS> " send "SHOW SECTIONS\r"; expect "DS> "; go -q
+send "SHOW STATUS\r"
+go -q
 if (DIAG_QUIET_MODE) set -q console telnet=log=diag_fail.log; set -q console telnet=nolog; type diag_fail.log;delete diag_fail.log
 echof "\n*** FAILED - %DIAG_DESC% %DIAG_TEST% after running for %SIM_RUNTIME% %SIM_RUNTIME_UNITS%\n"
 exit 1