Removed TQ (TMSCP), TS (TSV11) and VH (DHV11) devices from this
simulator since these devices were never supported in release MicroVAX I
configurations.
Lacking a scatter/gather map, DMA devices needed to be written to
perform DMA into contigous buffers in low memory and then copy data
to user space buffers. The MSCP protocol devices had specific support to
do scatter/gather transfers as part of the protocol. The RL01/RL02 device
driver was modified to perform the appropriate buffer moves most likely
to prove the customer option to adjust their drivers actually worked. In
any case, boot support for RL01/RL02 disks does not exist.
Under certain circumstances, the timer resolution in the Version 3
could become coarse enough that very short timer intervals would lead
to an infinite loop of bus errors when running timer firmware
diagnostics.
After adding the sim_clock_precalibrate_commands, the PC was not zero
at the sim> prompt after loading altairz80.
Set CPU_S to zero in cpu_reset to address this issue.
While working on the AltairZ80 documentation, I found some problems
with the SOL20 registers and fixed some formatting issues.
Added static and "vdm1_" prefix to "charset" variable in s100_vdm1.c
This PR adds support for the Processor Technology VDM-1 display adapter and Sol-20 computer system. The VDM-1 was integrated into the Sol-20 but has been separated out into its own device.
This PR adds the following devices to the AltairZ80 simulator:
VDM1 - Processor Technology VDM-1 display adapter
SOL20 - Processor Technology SOL20 with SOLOS ROMs
SOL20K - SOL20 Keyboard (callback from VDM1)
SOL20T - SOL20 Tape (reads/writes cassette file images)
SOL20S - SOL20 Serial Port (TMXR capable)
SOL20P - SOL20 Printer Port (TMXR capable)
This corrects an error that caused SIO reject when SIO occured before
a pending seek interrupt on a different device.
- Move the interrupt pending test from sigma_io.c into each device.
- Make the sigma_dp.c test a special case that looks for pending
seek interrupts.
Used to initialize SCP timers to prevent problems during simulator startup
when THROTTLE is being used.
/*
* This sequence of instructions is a mix that mimics
* a resonable instruction set that is a close estimate
* to the calibrated result.
*/
static const char *cpu_clock_precalibrate_commands[] = {
"-m 100 LXI H,200H",
"-m 103 MVI B,0",
"-m 105 DCR B",
"-m 106 MOV M,B",
"-m 107 INX H",
"-m 108 JNZ 0105H",
"-m 10B JMP 0100H",
"PC 100",
NULL};
