Updated readme photo to show V1.2 PCB, and added note on video output "improvements"

+ Fixed outdated RF Modulator footprint
+ Edited schematic to further improve readability
+ Added silkscreen denoting PAL and NTSC X1 frequencies
+ Added mask layer to edge connector to remove soldermask from the mating surfaces

Board Files/Motherboard.pro

@@ -1,4 +1,4 @@
-update=12/2/2019 9:31:35 PM
+update=2/15/2021 12:34:27 PM
 version=1
 last_client=kicad
 [general]
@@ -12,16 +12,6 @@ NetIExt=net
 version=1
 LibDir=
 [eeschema/libraries]
-[schematic_editor]
-version=1
-PageLayoutDescrFile=
-PlotDirectoryName=F:/NES-RE/Board Files
-SubpartIdSeparator=0
-SubpartFirstId=65
-NetFmtName=
-SpiceAjustPassiveValues=0
-LabSize=50
-ERC_TestSimilarLabels=1
 [pcbnew]
 version=1
 PageLayoutDescrFile=
@@ -250,3 +240,13 @@ uViaDrill=0.1
 dPairWidth=0.2
 dPairGap=0.25
 dPairViaGap=0.25
+[schematic_editor]
+version=1
+PageLayoutDescrFile=
+PlotDirectoryName=
+SubpartIdSeparator=0
+SubpartFirstId=65
+NetFmtName=
+SpiceAjustPassiveValues=0
+LabSize=50
+ERC_TestSimilarLabels=1

Component Footprints/NESRE.pretty/Mod_RF.kicad_mod

@@ -1,17 +1,17 @@
-(module Mod_RF (layer F.Cu) (tedit 5DF56B32)
-  (fp_text reference REF** (at 0 0.5) (layer F.SilkS)
+(module Mod_RF (layer F.Cu) (tedit 5FF8DCCF)
+  (fp_text reference P3 (at 0.314 5.086) (layer F.SilkS)
     (effects (font (size 1 1) (thickness 0.15)))
   )
-  (fp_text value Mod_RF (at 0 -0.5) (layer F.Fab)
+  (fp_text value "MOD RF" (at 6.224 -1.314) (layer F.Fab)
     (effects (font (size 1 1) (thickness 0.15)))
   )
-  (pad 1 thru_hole circle (at 0 3) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
-  (pad 2 thru_hole circle (at 4 3) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
-  (pad 3 thru_hole circle (at 8 3) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
-  (pad 4 thru_hole circle (at 12 3) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
-  (pad 5 thru_hole circle (at 16 3) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
-  (pad 6 thru_hole oval (at -5.2 6) (size 4.25 9.25) (drill oval 1.16 4.18) (layers *.Cu *.Mask))
-  (pad 7 thru_hole oval (at -5.25 16.75) (size 4.25 9.25) (drill oval 1.16 4.18) (layers *.Cu *.Mask))
-  (pad 8 thru_hole oval (at 24.134 16.575 90) (size 4.25 9.25) (drill oval 1.16 4.18) (layers *.Cu *.Mask))
-  (pad 9 thru_hole oval (at 24.134 -2.275 90) (size 4.25 9.25) (drill oval 1.16 4.18) (layers *.Cu *.Mask))
+  (pad 6 thru_hole oval (at 22.344 -2.275 90) (size 4.25 9.25) (drill oval 1.16 5.62) (layers *.Cu *.Mask))
+  (pad 6 thru_hole oval (at 22.344 16.575 90) (size 4.25 9.25) (drill oval 1.16 5.62) (layers *.Cu *.Mask))
+  (pad 6 thru_hole oval (at -6.23 15.9) (size 4.25 9.25) (drill oval 1.16 5.12) (layers *.Cu *.Mask))
+  (pad 6 thru_hole oval (at -6.23 5.1) (size 4.25 9.25) (drill oval 1.16 5.12) (layers *.Cu *.Mask))
+  (pad 5 thru_hole circle (at 16 2.156) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
+  (pad 4 thru_hole circle (at 12 2.156) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
+  (pad 3 thru_hole circle (at 8 2.156) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
+  (pad 2 thru_hole circle (at 4 2.156) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
+  (pad 1 thru_hole circle (at 0 2.156) (size 3 3) (drill 1.5) (layers *.Cu *.Mask))
 )

README.md

@@ -1,6 +1,13 @@
 # Open 'Tendo
 An Open-Source HardWare (OSHW) recreation of the original 1985 Front-Loading NES motherboard.
 
+
+## Note on RGB and HDMI:
+
+Neither RGB nor HDMI video output were or are a goal of the OpenTendo project, the goal was/is documentation and preservation, and the project was an exercise in reverse engineering. As such "improved" video outputs will not be added to OpenTendo.
+
+NESRGB and Hi-Def NES can be installed as normal, but will not be incorporated into the OpenTendo PCB
+
 ## Repository Structure:
 
 * Board Files: Contains all files necessary to open the project in KiCad, as well as the schematic and schematic symbols
@@ -18,11 +25,11 @@ The files required to order PCBs can be found under releases.
 
 * 1.6mm thickness
 
-* HASL surface finish
+* HASL or ENiG surface finish
 
 * And any color you want!
 
-![Board Front](https://i.imgur.com/nQP6BoM.jpg)
+![Board Front](https://i.imgur.com/yBy1h27.jpeg)
 
 The design is as true to the original board as possible, with subtle changes where needed to compensate for outdated/unsourcable parts,
 as well as some improvements. (Expansion audio enabled, and other minor changes)
@@ -31,7 +38,7 @@ Since this project is open-source you may do as you like with it, whether that i
 
 I am not in any way affiliated with Nintendo, I'm just doing this in my free time as a stepping stone into further Reverse Engineering work.
 
-*Note:* At this point in time, any and all motherboards will require the use of an original CPU[1],  and PPU[1] to function.
+*Note:* At this point in time, any and all motherboards will require the use of an original CPU[1],  and PPU[2] to function.
   
 These are the only two parts that are custom and have no available replacement, the rest can be replaced with modern, and or easily available parts.