Added ESP32-S3 build

.github/workflows/release.yml

@@ -147,6 +147,29 @@ jobs:
         asset_name: ams2mqtt-esp32s2-${{ steps.release_tag.outputs.tag }}.zip
         asset_content_type: application/zip
 
+    - name: Build esp32s3 firmware
+      run: pio run -e esp32s3
+    - name: Create esp32s3 zip file
+      run: /bin/sh scripts/esp32s3/mkzip.sh
+    - name: Upload esp32s3 binary to release
+      uses: actions/upload-release-asset@v1
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      with:
+        upload_url: ${{ steps.create_release.outputs.upload_url }}
+        asset_path: .pio/build/esp32s3/firmware.bin
+        asset_name: ams2mqtt-esp32s3-${{ steps.release_tag.outputs.tag }}.bin
+        asset_content_type: application/octet-stream
+    - name: Upload esp32s3 zip to release
+      uses: actions/upload-release-asset@v1
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      with:
+        upload_url: ${{ steps.create_release.outputs.upload_url }}
+        asset_path: esp32s3.zip
+        asset_name: ams2mqtt-esp32s3-${{ steps.release_tag.outputs.tag }}.zip
+        asset_content_type: application/zip
+
     - name: Build esp32solo firmware
       run: pio run -e esp32solo
     - name: Create esp32solo zip file

platformio.ini

@@ -86,4 +86,16 @@ lib_ldf_mode = off
 lib_compat_mode = off
 lib_deps = ${esp32.lib_deps}
 lib_ignore = ${common.lib_ignore}
+extra_scripts = ${common.extra_scripts}
+
+[env:esp32s3]
+platform = https://github.com/tasmota/platform-espressif32/releases/download/2023.07.00/platform-espressif32.zip
+framework = arduino
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags = ${common.build_flags}
+lib_ldf_mode = off
+lib_compat_mode = off
+lib_deps = ${esp32.lib_deps}
+lib_ignore = ${common.lib_ignore}
 extra_scripts = ${common.extra_scripts}

scripts/esp32s3/flash.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+if [ -z "$1" ];then
+    echo "Usage: "
+    echo "  Flashing first time            :   $0 flash /dev/ttyUSB0"
+    echo "  When upgrading to new version  :   $0 upgrade /dev/ttyUSB0"
+    echo "    NOTE: Replace /dev/ttyUSB0 with correct port"
+    exit 1
+fi
+
+if [ -z "$2" ];then
+    echo "Please specify port"
+    exit 1
+fi
+
+esptool=`which esptool`
+if [ -z "$esptool" ];then
+    esptool=`which esptool.py`
+fi
+if [ -z "$esptool" ];then
+    if [ -f esptool.py ];then
+        esptool="esptool.py"
+    fi
+fi
+if [ -z "$esptool" ];then
+    echo "esptool.py not available to run following command: "
+    esptool="echo esptool.py"
+fi
+
+if [ "$1" = "flash" ];then
+    $esptool --chip esp32s3 --port $2 --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect \
+    0x0000 bootloader.bin \
+    0x8000 partitions.bin \
+    0xe000 boot_app0.bin \
+    0x10000 firmware.bin
+    exit $?
+elif [ "$1" = "upgrade" ];then
+    $esptool --chip esp32s3 --port $2 --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x10000 firmware.bin
+    exit $?
+fi

scripts/esp32s3/mkzip.sh

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+env="esp32s3"
+build_dir=".pio/build/$env/"
+
+if [ ! -d $build_dir ];then
+    echo "No build directory"
+    exit 1
+fi
+
+cp ~/.platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin $build_dir
+chmod +x scripts/$env/flash.sh
+zip -j $env.zip $build_dir/*.bin scripts/$env/flash.sh