Use loop enumeration of PIPs instead of direct name construction for the
upper and lower ends of the segment wire.
Also do not allow clock wires for segments.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* SER_CLK support
* Update constids
* wip
* CLK_FEEDBACK
* Handle SER_CLK and SER_CLK_N
* clangformat
* Cleanup
* Use _ as separator for PLL CFGs
* Remove unused clocking cells
* Do not use same name for IO models
* Fix IDDR merge
* Cleanup
* Properly handle user global signals
* Move signal inversion in bitstream creation
* Start adding multi die support
* Display die location for pins used
* Do not use constant s as locations
* Cleanup SB_DRIVE handling
* Use DDR locations from chip database
* Place only in prefered die for now
* Set D2D
* Fixed typos
A segment router replaces the source-to-sink connection by
general-purpose PIPs with bus-branch segment network connections.
The problem arises when the source is connected to the sinks directly
without switching as in the case of LUT->DFF, such wires should be left
as is, which is what this PR does.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* gatemate: clock router
Co-authored-by: Miodrag Milanovic <mmicko@gmail.com>
* Re-add clock router pip binding
* Refactoring
* Require globals to use a BUFG
* Fix misunderstanding of GPIO/RAM clocking
* Add plane info to chipdb
* Force clock routing along a specific plane
* Remove overly-limiting condition
* Move clock router into its own file
* Clock router based on delay
* Refine clock router conditions
* More detailed clock routing output
* Clean up debug messages
* clangformat
---------
Co-authored-by: Miodrag Milanovic <mmicko@gmail.com>
Fill in the delays for PIP classes related to HCLK and IODELAY. Also:
- if clock routing fails, we try to use the next fastest mechanism - segment networks;
- fixing harmless typos.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
Each PLL output in ECP5 can be bypassed, which turns it into a wire
that passes through ICLK unmodified. When an outputs mux is set to
REFCLK, disregard other PLL configuration and copy the input constraint
over unchanged.
* Initial code for GateMate
* Initial work on forming bitstream
* Add CCF parsing
* Use CCF to set IO location
* Propagate errors
* Restructure code
* Add support for reading from config
* Start adding infrastructure for reading bitstream
* Fix script
* GPIO initial work
* Add IN1->RAM_O2 propagation
* Fixed typo
* Cleanup
* More parameter checks
* Add LVDS support
* Cleanup
* Keep just used connections for now
* Naive lut tree CPE pack
* Naive pack CC_DFF
* pack DFF fixes
* Handle MUX flags
* Fix DFF pack
* Prevent pass trough issues
* Cleanup
* Use device wrapper class
* Update due to API changes
* Use pin connection aliases
* Start work on BUFG support
* Fix CC_L2T5 pack
* Add CPE input inverters
* Constrain routes to have correct inversion state
* Add clock inversion pip
* Added MX2 and MX4 support
* Fix script
* BUFG support
* debug print if route found with wrong polarity
* Some CC_DFF improvements
* Create reproducible chip database
* Simplify inversion of special signals
* Few more DFF features
* Add forgotten virtual port renames
* Handle muxes with constant inputs
* Allow inversion for muxes
* cleanup
* DFF input can be constant
* init DFF only when needed
* cleanup
* Add basic PLL support
* Add some timings
* Add USR_RSTN support
* Display few more primitives
* Use pass trough signals to validate architecture data
* Use extra tile information from chip database
* Updates needed for a build system changes
* Implement SB_DRIVE support
* Properly named configuration bits
* autogenerated constids.inc
* small fix
* Initial code for CPE halfs
* Some cleanup
* make sure FFs are compatible
* reverted due to db change
* Merge DFF where applicable
* memory allocation issue
* fix
* better MX2
* ram_i handling
* Cleanup MX4
* Support latches
* compare L_D flag as well
* Move virtual pips
* Naive addf pack
* carry chains grouping
* Keep chip database reproducible
* split addf vectors
* Block CPEs when GPIO is used
* Prepare placement code
* RAM_I/RAM_O rewrite
* fix ram_i/o index
* Display RAM and add new primitives
* PLL wip code
* CC_PLL_ADV packing
* PLL handling cleanup
* Add PLL comments
* Keep only high fan-out BUFG
* Add skeleton for tests
* Utilize move_ram_o
* GPIO wip
* GPIO wip
* PLL fixes
* cleanup
* FF_OBF support
* Handle FF_IBF
* Make SLEW FAST if not defined as in latest p_r
* Make sure FF_OBF only driving GPIO
* Moved pll calc into separate file
* IDDR handling and started ODDR
* Route DDR input for CC_ODDR
* Notify error in case ODDR or IDDR are used but not with I/O pin
* cleanup for CC_USR_RSTN
* Extract proper RAM location for bitstream
* Code cleanup
* Allow auto place of pads
* Use clock source flag
* Configure GPIO clock signals
* Handle conflicting clk
* Use BUGF in proper order
* Connected CLK, works without but good for debugging
* CC_CFG_CTRL placement
* Group RAM data 40 bytes per row
* Write BRAM content
* RAM wip
* Use relative constraints from chipdb
* fix broken build
* Memory wip
* Handle custom clock for memories
* Support FIFO
* optimize move_ram_io
* Fix SR signal handling acorrding to findings
* set placer beta
* Pre place what we can
* Revert "debug print if route found with wrong polarity"
This reverts commit cf9ded2f18.
* Revert "Constrain routes to have correct inversion state"
This reverts commit 795c284d48.
* Remove virtual pips
* Implement post processing inversion
* ADDF add ability to route additional CO
* Merge two ADDFs in one CPE
* Added TODO
* clangformat
* Cleanup
* Add serdes handling in config file
* Cleanup
* Cleanup
* Cleanup
* Fix in PLL handling
* Fixed ADDF edge case
* No need for this
* Fix latch
* Sanity checks
* Support CC_BRAM_20K merge
* Start creating testing environment
* LVDS fixes
* Add connection helper
* Cleanup
* Fix tabs
* Formatting fix
* Remove optimization tests for now
* remove read_bitstream
* removed .c_str()
* Removed config parsing
* using snake_case
* Use bool_or_default where applicable
* refactored bitstream write code
* Add allow-unconstrained option
* Update DFF related messages
* Add clock constraint propagation
---------
Co-authored-by: Lofty <dan.ravensloft@gmail.com>
* Gowin. BUGFIX Use a separate net for segment gates
We use a temporary separate small network (typically 2 - 3 sinks) for
routing from the segment network source to the segment gate. This fixes
the rare but unpleasant case of self-intersection when a route to a gate
is routed using PIPs after the gate, this is no longer allowed when
using a separate small network.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* Gowin. Fix style.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
---------
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
DLLDLY is the clock delay primitive that adjust the input clock
according to the DLLSTEP signal and outputs the delayed clock.
These primitives are associated with clock pins and are "tapped" between
the output of this IBUF and the clock networks, leaving the possibility
to connect to the original unshifted signal as well, although the latter
is not very practical because it is no longer possible to use fast
wires.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
