debian/changelog: UNRELEASED -> unstable

manpage -> man page

.gitignore

@@ -1,11 +1,31 @@
-.hg
-.hgtags
-ChangeLog
+# Note! Please run 'prove t/gitignore.t' after changing
+# this file, to check its coherency
+
+# all dotfiles
+.*
+# but we _wan't_ those dot-files
+!.gitignore
+!.hgignore
+!.mailmap
+
+# ChangeLog is generated during make
+/ChangeLog
+
+# those are generated during debian package build
+/build-stamp
+/configure-stamp
+/man
+/debian/files
+/debian/xen-tools
+/debian/xen-tools.debhelper.log
+/debian/xen-tools.substvars
+
+# git-generated patches
+/*.patch
+
+# some backups
 *~
-build-stamp
-configure-stamp
-man
-debian/files
-debian/xen-tools
-debian/xen-tools.debhelper.log
-debian/xen-tools.substvars
+*.orig
+
+# backups created by "make update-version"
+*.bak

.hgtags

@@ -1,2 +0,0 @@
-d75c787add2a7ceb19b30b018d4d16b7317c772d release-4.
-6a10240d7c66e2f7df56457708efb9287640bcf4 release-4.1

.mailmap

@@ -0,0 +1,6 @@
+Axel Beckert <abe@deuxchevaux.org>
+Dmitry Nedospasov <dmitry@nedos.net>
+Nathan O'Sullivan <nathan@mammoth.com.au>
+Radu Spineanu <radu@debian.org> radu <none@none>
+Steve Kemp <steve@steve.org.uk> steve <none@none>
+Stéphane Jourdois <sjourdois@gmail.com> <stephane@jourdois.fr>

.release

@@ -1,34 +0,0 @@
-#
-#  Configuration file for 'release', a utility to make release more
-# easily:
-#
-#   http://release.repository.steve.org.uk/
-#
-# Steve
-# -- 
-#
-
-
-#
-#  Command to run
-#
-preupload="make release"
-
-
-#
-#
-#  Pattern for our release tarball.
-#
-pattern=xen-tools-[0-9].[0-9].tar.gz*
-
-
-#
-#  Pattern for our GPG-signature.
-#
-signature=xen-tools-[0-9].[0-9].tar.gz.asc
-
-
-#
-#  Upload location.
-#
-upload=steve@www.xen-tools.org:/home/www/www.xen-tools.org/htdocs/software/xen-tools/

AUTHORS

@@ -1,10 +1,9 @@
-
-        
 Primary Authors
 ---------------
 
   Axel Beckert <abe@deuxchevaux.org>
   Dmitry Nedospasov <dmitry@nedos.net>
+  Stéphane Jourdois <sjourdois [at] com.gmail>
   Steve Kemp <steve [at] uk.org.steve>
 
 
@@ -50,6 +49,9 @@ Contributions
    - Improved binary detection and good suggestions.
    - Better portability for non-bash shells.
 
+  Jorge Armando Medina <jmedina [at] com.e-compugraf>
+   - Fix for backward compatibility with xvc0 serial consoles
+
   Gordon Messmer <gmessmer [at] edu.washington.u>
    - Supplied .spec file for building .rpm packages.
 
@@ -74,7 +76,7 @@ Contributions
 
   Radu Spineanu <radu [at] org.debian>
    - Supplied many small tweaks, bugfixes, and suggestions.
-   - Radu is also the Debian package maintainer and has CVS commit access.
+   - Radu is also one of the former Debian package maintainers.
 
   Henning Sprang <henning_sprang [at] de.gmx>
    - Many suggestions and useful Debian bug reports.

KNOWN_BUGS

@@ -0,0 +1,13 @@
+KNOWN BUGS in xen-tools
+
+Bugs to fix before a 4.2 release
+--------------------------------
+
+* xen-delete-image doesn't remove all logical volumes if --partitions is used.
+
+   See the link below for details how to reproduce. Reproducable at
+   least with --lvm. Thanks to Antoine Benkemoun for reporting.
+
+   http://xen-tools.org/pipermail/xen-tools-discuss/2010-May/000757.html
+
+* xen-delete-image ignores extension setting

Makefile

@@ -14,10 +14,10 @@
 #
 TMP        ?= /tmp
 DIST_PREFIX = ${TMP}
-VERSION     = 4.2rc1
+VERSION     = 4.2
 DEBVERSION  = $(shell echo $(VERSION)|sed 's/\(rc\|pre\|beta\|alpha\)/~\1/')
 BASE        = xen-tools
-VCS         = $(shell if git st > /dev/null; then echo git; \
+VCS         = $(shell if git ls-files > /dev/null; then echo git; \
                     elif hg st  > /dev/null; then echo hg; \
                     else                          echo cannot-determine-used-vcs; fi)
 
@@ -53,14 +53,17 @@ changelog:
 #  Delete all temporary files, recursively.
 #
 clean:
-	@find . -name '.*~' -exec rm \{\} \;
-	@find . -name '.#*' -exec rm \{\} \;
-	@find . -name '*~' -exec rm \{\} \;
-	@find . -name '*.bak' -exec rm \{\} \;
-	@find . -name '*.tmp' -exec rm \{\} \;
-	@find . -name 'tags' -exec rm \{\} \;
-	@find . -name '*.8.gz' -exec rm \{\} \;
-	@find . -name '*.tdy' -exec rm \{\} \;
+	@find . \
+		-path ./.git -prune -o \
+		\( \
+			-name '*~' -o \
+			-name '.#*' -o \
+			-name '*.bak' -o \
+			-name '*.tmp' -o \
+			-name 'tags' -o \
+			-name '*.8.gz' -o \
+			-name '*.tdy' \
+		\) -exec rm "{}" +
 	@if [ -d man ]; then rm -rf man ; fi
 	@if [ -e build-stamp ]; then rm -f build-stamp ; fi
 	@if [ -e configure-stamp ]; then rm -f configure-stamp ; fi
@@ -142,6 +145,7 @@ install-bin:
 #
 install-hooks:
 	for i in roles/* ; do if [ -f $$i ]; then cp $$i ${prefix}/etc/xen-tools/role.d; fi ; done
+	for i in ${prefix}/usr/lib/xen-tools/*.d; do if [ -L "$$i" ]; then rm -vf "$$i"; fi; done
 	mkdir -p ${prefix}/usr/lib/xen-tools/centos-4.d/
 	mkdir -p ${prefix}/usr/lib/xen-tools/centos-5.d/
 	mkdir -p ${prefix}/usr/lib/xen-tools/fedora-core-6.d/
@@ -163,6 +167,7 @@ install-hooks:
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d etch.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d lenny.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d squeeze.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d wheezy.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d sid.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d testing.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d stable.d
@@ -182,6 +187,7 @@ install-hooks:
 	cp -R hooks/karmic/*-* ${prefix}/usr/lib/xen-tools/karmic.d/
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d lucid.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d maverick.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d natty.d
 	cp hooks/common.sh ${prefix}/usr/lib/xen-tools
 
 
@@ -243,7 +249,7 @@ orig-tar-gz: release
 #
 #  Run the test suite.
 #
-test:
+test: update-modules
 	prove --shuffle t/
 
 
@@ -305,7 +311,7 @@ update:
 # cases to ensure that all required modules are available.
 #
 update-modules:
-	cd t && make modules
+	@cd t && make modules
 
 
 #
@@ -313,4 +319,4 @@ update-modules:
 # at the top of this file.  Steve-Specific?
 #
 update-version:
-	perl -pi.bak -e "s/RELEASE = '[0-9]\.[0-9][^']*';/RELEASE = '${VERSION}';/g" bin/*-*[^~]
+	perl -pi.bak -e "s/RELEASE = '[0-9]\.[0-9][^']*';/RELEASE = '${VERSION}';/g" bin/*-*[!~]

README

@@ -1,3 +1,5 @@
+xen-tools
+---------
 
 Homepage:
     http://www.xen-tools.org/software/xen-tools
@@ -6,32 +8,28 @@ Git Repository:
     http://gitorious.org/xen-tools
 
 Mailing Lists:
-    http://xen-tools.org/software/xen-tools/lists.html
+    http://www.xen-tools.org/software/xen-tools/lists.html
 
-
-
-xen-tools
----------
-
-  The xen-tools package contains a collection of Perl scripts for
- working with Xen guest images under Debian GNU/Linux.
+About:
+  Xen-tools contains a collection of Perl scripts for working with Xen
+ guest images under Linux.
 
   Using this software, you can easily create new Xen guests configured
- to be accessible over your local network and complete with an installed
- copy of OpenSSH.
+ to be accessible over the network via OpenSSH.
 
   xen-tools currently has scripts to install most releases of Debian
  (starting with 3.1 "Sarge") and Ubuntu (starting with 6.06 LTS
  "Dapper") and some RPM-based distributions.
 
-  However currently only Debian and Ubuntu releases are tested and
-  known to work, i.e.:
+  However, currently only Debian and Ubuntu releases are tested and
+ known to work, i.e.:
 
 	Debian:
 	  * Sarge 3.1 (i386 only)
 	  * Etch 4.0
 	  * Lenny 5.0
 	  * Squeeze 6.0
+	  * Wheezy 7.0 (preliminary support as it's not yet available)
 	  * Sid (works at least at the moment of writing :-)
 
 	Ubuntu:
@@ -43,22 +41,18 @@ xen-tools
 	  * Interpid Ibex 8.10
 	  * Jaunty Jackaplope 9.04
 	  * Karmic Koala 9.10
-	  * Lucid Lynx 10.04 (see [2])
+	  * Lucid Lynx 10.04
 	  * Maverick Meerkat 10.10 (works at least at the moment of writing :-)
+	  * Natty Narwhal 11.04 (preliminary support as it's not yet available)
 
   [1] There is an issue with debootstrap on hardy not installing ksyslogd
       This can be fixed by chrooting into the newly installed system
       and removing the startup scripts. See:
       http://www.linux-vserver.org/Installing_Ubuntu_8.04_Hardy_as_guest
 
-  [2] As of writing this 24.04.10, there is an issue with tar on
-      Lucid with kernels < 2.6.22 this should however be patched right
-      after release. See:
-      https://bugs.launchpad.net/ubuntu/+source/tar/+bug/539814
-
-  Older versions of ubuntu may work, however you will have to have to find
- a mirror that still hosts them. Currently the oldest Ubuntu Distribution
- on Canonical's archive.ubuntu.com is Hardy Heron.
+  Xen-Tools are available prepackaged in Debian and as source tar-ball
+ for local installation. Installing from source should work flawlessly
+ on most Linux systems that meet the installation requirements.
 
 Requirements
 ------------
@@ -74,24 +68,31 @@ Requirements
         * Make, if you are not installing through a package manager
 
   You can try to install RPM-based distributions such as CentOS, or
- Fedora Core you will need a correctly installed and configured
+ Fedora Core, but you will need a correctly installed and configured
  "rinse" package. This is currently not supported.
 
   If you wish to create new Xen instances which may be controlled by
- users via a login shell you should also install the xen-shell package
- which is available from:
+ users via a login shell you can have a look at the (currently
+ unmaintained) xen-shell package which is available from:
 
           http://xen-tools.org/software/xen-shell/
 
 
+Installation
+------------
+
+As root or with sudo, execute "make install".
+
+See debian/README.source how to build the Debian package from a
+checked out copy of the git repository (i.e. without a source tar
+ball).
+
 
 The Scripts
 -----------
 
-  There now follows a brief description of each included script,
- for more thorough documentation please consult the appropriate
- manpage.
-
+  Here is a brief description of each included script, for more
+ thorough documentation please consult the appropriate man page.
 
 
 xen-create-image
@@ -100,10 +101,6 @@ xen-create-image
   This script is designed to create new images which may be used
  with the Xen hypervisor.
 
-  The virtual images will have their networking settings created and,
- you may optionally cause the new instance to boot once it has
- been created.
-
   This script performs the initial setup, then delegates the real
  work to a collection of helper scripts:
 
@@ -118,6 +115,11 @@ xen-create-image
       Create a configuration file in /etc/xen such that Xen can
       boot the newly created machine.
 
+    * xt-guess-suite-and-mirror
+      In case of a Debian or Ubuntu Dom0, this script tries to guess
+      the most suitable suite and mirror for DomUs based on the Dom0's
+      /etc/apt/sources.list.
+
 
 xen-create-nfs
 --------------
@@ -159,6 +161,5 @@ xen-update-image
     a Debian-derived distribution.
 
 
-Steve
---
-
+-- 
+The Xen-Tools Developer Team

TODO

@@ -1,67 +1,32 @@
 TODO
 ====
 
-Bugs to fix and Features to add before a 4.2 release
-----------------------------------------------------
+See KNOWN_BUGS for real bugs.
+
+Bugs to fix and features to add for 5.0
+---------------------------------------
 
 * xen-create-image man page overhaul:
 
 - ambiguous option list with regards to parameters
-
-* Interactive Password Handling (maybe also the passwd role)
-
-   Shouldn't give up after only one password missmatch. This is just
-   a mater of wrapping the passwd call in a loop.
-
-* Fix 70-install-ssh
-
-   Currently 70-install-ssh fails to finish installing the ssh-server
-   because it does not have a random seed to generate the host keys.
-   Mounting /proc and /dev in chroot prior to calling the install
-   function should fix this. If ssh-server is successfully installed
-   in the domU, it's key fingerprint should be echo'd in a way that
-   can easily be grep'ed into other scripts.
-
+- Set Fail in more situations where the script has clearly failed
+  i.e.: lvm exists
 
 * Test and support more file system types.
 
    Actually this should be pretty simple now that the parameters are
-   stored in the configuration hash.  The only issue is that trailing
-   whitespace is missing from the "make_fs_foo" option.
-
-* xen-delete-image doesn't remove all logical volumes if --partitions is used.
-
-   See the link below for details how to reproduce. Reproducable at
-   least with --lvm. Thanks to Antoine Benkemoun for reporting.
-
-   http://xen-tools.org/pipermail/xen-tools-discuss/2010-May/000757.html
-
-* xen-delete-image ignores extension setting
-
-* xen-create-image should check all integer options on non-digits.
-
-* Test suite should pass
-
-   Currently failing:
-
-   t/getopt.t
-   t/xen-delete-image.t
-   t/xen-tools.t
-   t/xt-create-xen-config.t
-
-* Clean up setup-hostname - copying /etc/hosts isn't reliable
-
-   One could argue that that this gives "extra" information to the domU, since
-   the /etc/hosts file may contain more than just hosts on the same subnet.
-   This should atleast be disabled via a flag.
+   stored in the configuration hash.
 
 * Setup locales in the hooks?
 
-   Currently no locales are set and this causes several domU errors which appear
-   in the domU's logs.
+   Currently no locales are set and this causes several domU errors
+   which appear in the domU's logs.
 
-Maybe for a 4.3 or 5.0 release
-------------------------------
+* Documentation overhaul
+
+   Better explain what roles /should be/ used for, and that roles
+   are examples, and shouldn't cover every single scenario. They
+   are also easy to write.
 
 * xen-create-image --dist=... / sources.list generation should be more fine-grained
 
@@ -95,24 +60,22 @@ Maybe for a 4.3 or 5.0 release
 
 * Clean up mounts on Ctrl-C, causes error while installing otherwise:
 
-   Removing /dev/vg0/acromantula-domu1-disk - since we're forcing the install
-   Can't remove open logical volume "acromantula-domu1-disk" this should be a
-   matter of unmounting the mounted volume from /tmp.
-
-* Non-Interactive Password Handling
-
-   Option to generate passwords (check pwgen, apg, makepasswd, and
-   gpw which of them are best suited for generating complete
-   /etc/passwd and /etc/shadow lines). The password should be echo'ed
-   after installation in a way that can be easily grep'ed into other
-   scripts.
+   Removing /dev/vg0/acromantula-domu1-disk - since we're forcing the
+   install Can't remove open logical volume "acromantula-domu1-disk"
+   this should be a matter of unmounting the mounted volume from /tmp.
 
 * Generic grub support
 
-   This will generate a much nicer menu.lst as a side effect, as its currently
-   generated once at install, and is never updated. Installing a full grub into
-   the domU should update the menu.lst every time a new kernel is installed and
-   will also use the domU distro's menu.lst conform.
+   This will generate a much nicer menu.lst as a side effect, as its
+   currently generated once at install, and is never updated. Installing
+   a full grub into the domU should update the menu.lst every time a
+   new kernel is installed and will also use the domU distro's menu.lst
+   conform.
+
+* pv-grub support
+
+   This is a ways away and will probably start with a xen-pv-grub
+   package.
 
 * Move the hooks directory to /etc/xen-tools/ to officially allow
    added and modified hooks.
@@ -140,7 +103,7 @@ Maybe for a 4.3 or 5.0 release
    To specify a directory of public keys, parsing the hostnames
    parsing the usernames from the ssh comment line
 
-* More generic hooks
+* More generic roles
 
    Deploy a web server or setup ssmtp directly via flag when setting up
    the machine. Open to suggestions, should just be some general use-cases
@@ -153,6 +116,33 @@ Maybe for a 4.3 or 5.0 release
    "type" of configuration you want, and a set of options specific to
    that flag could be parsed from xen-tools.conf
 
+* Refactor the code for less code duplication
+
+   Like e.g. readConfigurationFile in xen-create-image and
+   xen-resize-image which are not completely identical.
+
+* Refactor the code for less variants of calling cp, rm, mv, etc.
+
+   E.g. always use either cp() from File::Copy or /bin/cp, but not
+   both. To allow verbose copying, I (Axel) would prefer /bin/cp over
+   cp();
+
+* Parse numerical parameters transparently for the user
+
+   The user shouldn't have to know weather he should specify size
+   as <size>G or <size>Gb or <size>. This should be parsed without
+   user interaction and rely on a common format.
+
+* xen-update-image should mount /dev/pts before running apt-get
+
+* xen-update-image should have options for using ...
+
+   ... aptitude instead of apt-get
+
+   ... dist-upgrade instead of upgrade
+
+* Use Perl::Critic
+
 Stuff from Steve's TODO list / Generic TODOs
 --------------------------------------------
 

bin/xen-create-nfs

@@ -19,8 +19,9 @@ xen-create-nfs - Create a Xen configuration file for an NFS-root guest.
    --dhcp       Configure the guest to use DHCP for IP allocation.
    --gateway    The gateway address to use when configured with a static IP.
    --hostname   The hostname to configure for the guest.
-   --netmask    The netmask to use when configured with a static IP.
    --ip         The IP address to use when configured with a static IP.
+   --netmask    The netmask to use when configured with a static IP.
+   --nameserver The nameserver to use when configured with a static IP.
 
   General options:
    --admins     Specify which users should be setup as xen-shell admins.
@@ -83,18 +84,18 @@ Show the version number and exit.
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Stéphane Jourdois
 
 =cut
 
 
 =head1 LICENSE
 
-Copyright (c) 2005-2009 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -130,7 +131,7 @@ $CONFIG{ 'template' } = '/etc/xen-tools/xm-nfs.tmpl';
 #
 # Release number.
 #
-my $RELEASE = '4.2rc1';
+my $RELEASE = '4.2';
 
 
 # store version number away.
@@ -288,14 +289,15 @@ sub parseCommandLineArguments
     GetOptions(
 
         # Networking options
-        "dhcp",        \$CONFIG{ 'dhcp' },
-        "gateway=s",   \$CONFIG{ 'gateway' },
-        "broadcast=s", \$CONFIG{ 'broadcast' },
-        "ip=s",        \$CONFIG{ 'ip' },
-        "netmask=s",   \$CONFIG{ 'netmask' },
-        "hostname=s",  \$CONFIG{ 'hostname' },
-        "memory=s",    \$CONFIG{ 'memory' },
-        "mac=s",       \$CONFIG{ 'mac' },
+        "dhcp",         \$CONFIG{ 'dhcp' },
+        "gateway=s",    \$CONFIG{ 'gateway' },
+        "broadcast=s",  \$CONFIG{ 'broadcast' },
+        "ip=s",         \$CONFIG{ 'ip' },
+        "netmask=s",    \$CONFIG{ 'netmask' },
+        "nameserver=s", \$CONFIG{ 'nameserver' },
+        "hostname=s",   \$CONFIG{ 'hostname' },
+        "memory=s",     \$CONFIG{ 'memory' },
+        "mac=s",        \$CONFIG{ 'mac' },
 
         # NFS options.
         "nfs_server=s", \$CONFIG{ 'nfs_server' },

bin/xen-delete-image

@@ -16,8 +16,8 @@ xen-delete-image - Delete previously created Xen instances.
 
   General options:
    --dir      Specify the output directory where images were previously saved.
-   --lvm      Specify the LVM volume to use.
    --evms     Specify the EVMS container to use.
+   --lvm      Specify the LVM volume to use.
 
   Specifying hosts:
    --hostname Specify the image name to delete.
@@ -51,7 +51,7 @@ Specify the LVM volume group where images were previously saved.
 Read the manual for this script.
 
 =item B<--test>
-Don not complain, or exit, if the script is not executed by the root user.
+Do not complain, or exit, if the script is not executed by the root user.
 
 =item B<--version>
 Show the version number and exit.
@@ -130,18 +130,19 @@ Show the version number and exit.
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
 
 =cut
 
 
 =head1 LICENSE
 
-Copyright (c) 2005-2009 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -156,6 +157,7 @@ use strict;
 use English;
 use Getopt::Long;
 use Pod::Usage;
+use File::Path;
 
 
 #
@@ -169,7 +171,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.2rc1';
+my $RELEASE = '4.2';
 
 
 
@@ -412,7 +414,7 @@ sub checkArguments
     #
     if ( $count != 1 )
     {
-        print "Please select one and only one of the installation methods:\n";
+        print "Please select one and only one of the installation methods to delete the DomU:\n";
         print " --dir\n";
         print " --evms\n";
         print " --lvm\n";
@@ -517,7 +519,7 @@ sub deleteXenImage
                 print "Would delete: $prefix$hostname\n";
             } else {
                 print "Removing: " . $prefix . $hostname . "\n";
-                rmdir( $prefix . $hostname );
+                rmtree( $prefix . $hostname );
             }
         }
     }

bin/xen-list-images

@@ -58,18 +58,17 @@ Show the version number and exit.
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Stéphane Jourdois
 
 =cut
 
-
 =head1 LICENSE
 
-Copyright (c) 2005-2009 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -102,7 +101,7 @@ $CONFIG{ 'prefix' } = "/etc/xen";
 #
 # Release number.
 #
-my $RELEASE = '4.2rc1';
+my $RELEASE = '4.2';
 
 
 
@@ -239,7 +238,9 @@ sub parseCommandLineArguments
     #  Parse options.
     #
     GetOptions( "test=s", \$CONFIG{ 'prefix' },
-                "help", \$HELP, "manual", \$MANUAL, "version", \$VERSION );
+                "help", \$HELP,
+                "manual", \$MANUAL,
+                "version", \$VERSION );
 
     pod2usage(1) if $HELP;
     pod2usage( -verbose => 2 ) if $MANUAL;

bin/xen-resize-guest

@@ -76,18 +76,18 @@ Show the version number and exit.
 
 =cut
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
 
 =cut
 
 
 =head1 LICENSE
 
-Copyright (c) 2005-2009 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -116,7 +116,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.2rc1';
+my $RELEASE = '4.2';
 
 
 
@@ -301,6 +301,9 @@ sub readConfigurationFile
 {
     my ($file) = (@_);
 
+    # Don't read the file if it doesn't exist.
+    return if ( !-e $file );
+
     open( FILE, "<", $file ) or die "Cannot read file '$file' - $!";
 
     my $line = "";

bin/xen-update-image

@@ -80,19 +80,18 @@ Show the version number and exit.
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
-
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
 
 =cut
 
-
 =head1 LICENSE
 
-Copyright (c) 2005-2009 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -105,6 +104,7 @@ The LICENSE file contains the full text of the license.
 use strict;
 use English;
 use File::Temp qw/ tempdir /;
+use File::Copy qw/ mv cp /;
 use Getopt::Long;
 use Pod::Usage;
 
@@ -120,7 +120,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.2rc1';
+my $RELEASE = '4.2';
 
 
 #
@@ -287,6 +287,11 @@ sub updateXenImage
     if ( ( -e $tmp . "/usr/bin/apt-get" ) &&
          ( -x $tmp . "/usr/bin/apt-get" ) )
     {
+        #
+        #  Copy dom0's resolv.conf to domU
+        #
+        mv("$tmp/etc/resolv.conf", "$tmp/etc/resolv.conf.old") if -f "$tmp/etc/resolv.conf";
+        cp("/etc/resolv.conf", "$tmp/etc/resolv.conf");
 
         #
         #  Now run the update command.
@@ -300,6 +305,15 @@ sub updateXenImage
         system(
             "DEBIAN_FRONTEND=noninteractive  chroot $tmp /usr/bin/apt-get upgrade --yes --force-yes"
         );
+
+        #
+        #  Restore domU's resolv.conf if needed
+        #
+        if (-f "$tmp/etc/resolv.conf") {
+            mv("$tmp/etc/resolv.conf.old", "$tmp/etc/resolv.conf");
+        } else {
+            unlink "$tmp/etc/resolv.conf";
+        }
     }
     else
     {
@@ -437,10 +451,12 @@ sub parseCommandLineArguments
 
     #  Parse options.
     #
-    GetOptions( "dir=s",  \$CONFIG{ 'dir' },  "lvm=s",   \$CONFIG{ 'lvm' },
-                "evms=s", \$CONFIG{ 'evms' }, "help",    \$HELP,
-                "manual", \$MANUAL,           "version", \$VERSION
-              );
+    GetOptions( "dir=s",  \$CONFIG{ 'dir' },
+                "lvm=s",   \$CONFIG{ 'lvm' },
+                "evms=s", \$CONFIG{ 'evms' },
+                "help",    \$HELP,
+                "manual", \$MANUAL,
+                "version", \$VERSION );
 
     pod2usage(1) if $HELP;
     pod2usage( -verbose => 2 ) if $MANUAL;

bin/xt-create-xen-config

@@ -104,19 +104,18 @@ xt-create-config - Create a Xen configuration file for a new guest
 
 =cut
 
+=head1 AUTHORS
 
-=head1 AUTHOR
-
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
 
 =cut
 
-
 =head1 LICENSE
 
-Copyright (c) 2005-2009 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -151,12 +150,13 @@ my @PARTITIONS = undef;
 #  Default options
 #
 $CONFIG{ 'template' } = '/etc/xen-tools/xm.tmpl';
+$CONFIG{ 'extension' } = '.cfg';
 
 
 #
 # Release number.
 #
-my $RELEASE = '4.2rc1';
+my $RELEASE = '4.2';
 
 
 
@@ -305,6 +305,7 @@ sub importPartitionsFromEnvironment
 {
     @PARTITIONS = ();
 
+    return unless exists $ENV{ 'NUMPARTITIONS' };
     for ( my $i = 1 ; $i <= $ENV{ 'NUMPARTITIONS' } ; $i++ )
     {
         my @parts = split( /:/, $ENV{ 'PARTITION' . $i }, 7 );
@@ -333,12 +334,11 @@ sub importPartitionsFromEnvironment
 
 sub createXenConfig
 {
-
     #
     #  The output file we're going to process.
     #
     my $file =
-      $CONFIG{ 'output' } . '/' . $ENV{ 'hostname' } . $ENV{ 'extension' };
+      $CONFIG{ 'output' } . '/' . $ENV{ 'hostname' } . $CONFIG{ 'extension' };
 
     #
     #  The template we're going to read from.

bin/xt-customize-image

@@ -60,18 +60,19 @@ xt-customize-image - Customize a freshly installed copy of GNU/Linux
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
 
 =cut
 
 
 =head1 LICENSE
 
-Copyright (c) 2005-2009 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -97,7 +98,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.2rc1';
+my $RELEASE = '4.2';
 
 
 
@@ -226,12 +227,12 @@ sub checkArguments
     {
         print <<E_OR;
 
-  We're trying to configure an installation of $CONFIG{'dist'} in
+  We\'re trying to configure an installation of $CONFIG{'dist'} in
  $CONFIG{'location'} - but there is no hook directory for us to use.
 
-  This means we don't know how to configure this installation.
+  This means we don\'t know how to configure this installation.
 
-  We'd expect the hook directory to be : $dir
+  We\'d expect the hook directory to be : $dir
 
   Aborting.
 E_OR
@@ -322,9 +323,9 @@ sub runDistributionHooks
                 print "--\n";
                 my $rc = system($cmd);
                 if ($rc != 0) {
-		    print "hook $name failed: $?\n";
-		    exit 1;
-		}
+                print "hook $name failed: $?\n";
+                exit 1;
+            }
                 print "--\n";
                 print "Done\n\n";
             }
@@ -333,9 +334,9 @@ sub runDistributionHooks
                 print "Running hook $name\n";
                 my $rc = system($cmd);
                 if ($rc != 0) {
-		    print "hook $name failed: $?\n";
-		    exit 1;
-		}
+                    print "hook $name failed: $?\n";
+                    exit 1;
+                }
                 print "hook $name: done.\n";
             }
         }

bin/xt-guess-suite-and-mirror

@@ -2,39 +2,45 @@
 
 =head1 NAME
 
-xen-guess-debian-mirror - Tries to guess the most suitable mirror and
-suite for DomUs on Debian and Ubuntu Dom0s.
+xt-guess-suite-and-mirror - Tries to guess the most suitable suite and
+mirror for DomUs on Debian and Ubuntu Dom0s.
 
 =cut
 
 =head1 SYNOPSIS
 
-  xen-guess-debian-mirror [-s] [-m]
-
-  -s  show suite
-  -m  show mirror
+  --suite       Show suite
+  --mirror      Show mirror
 
   Shows both if no parameter is given.
 
+  Help Options:
+
+   --help       Show the help information for this script.
+   --manual     Show the manual for this script.
+   --version    Show the version number and exit.
+
 =cut
 
 =head1 DESCRIPTION
 
-xen-guess-debian-mirror tries to find the mirror and suite the Xen
+xt-guess-suite-and-mirror tries to find the mirror and suite the Xen
 Dom0 is currently using and returns them in a way suitable for
 xen-create-image(1) or the backticks feature in xen-tools.conf.
 
 =cut
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Axel Beckert <abe@deuxchevaux.org>, http://noone.org/abe/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
 
 =cut
 
 =head1 LICENSE
 
-Copyright (C) 2010 by Steve Kemp.  All rights reserved.
+Copyright (C) 2010 by The Xen-Tools Development Team. All rights
+reserved.
 
 This module is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself. The LICENSE file contains the
@@ -49,8 +55,9 @@ full text of the license.
 # Fallback to Debian or Ubuntu in case we can't find anything
 my $fallback = 'Debian';
 
-# Which mirrors to use if everything else fails
-my %fallback_mirror = ( Debian => 'http://ftp.debian.org/debian/',
+# Which mirrors to use if everything else fails (cdn.debian.net uses
+# GeoIP, see http://wiki.debian.org/DebianGeoMirror)
+my %fallback_mirror = ( Debian => 'http://cdn.debian.net/debian/',
                         Ubuntu => 'http://archive.ubuntu.com/ubuntu/' );
 
 # Which suite to use if everything else fails. For Debian "stable"
@@ -73,7 +80,7 @@ use strict;
 #
 # Release number.
 #
-my $RELEASE = '4.2rc1';
+my $RELEASE = '4.2';
 
 # Init
 my $mirror = '';
@@ -85,21 +92,20 @@ my $want_mirror  = 0;
 my $want_suite   = 0;
 my $want_version = 0;
 my $want_help    = 0;
-my $want_usage    = 0;
+my $want_manual  = 0;
 
-my $result = GetOptions ('mirror'  => \$want_mirror,
-                         'suite'   => \$want_suite,
-                         'version' => \$want_version,
-                         'usage'    => \$want_usage,
-                         'help'    => \$want_help);
+my $result = GetOptions( 'mirror|m' => \$want_mirror,
+                         'suite|s'  => \$want_suite,
+                         'version'  => \$want_version,
+                         'manual'   => \$want_manual,
+                         'help'     => \$want_help );
 
 if ($want_help) {
-    print "Usage: $0 [-m] [-s]\n";
-    exit 0;
+    pod2usage(0);
 }
 
-if ($want_usage) {
-    pod2usage(0);
+if ($want_manual) {
+    pod2usage( -verbose => 2 );
 }
 
 if (-r $sources_list_file) {

bin/xt-install-image

@@ -80,18 +80,19 @@ Untar a .tar file into the new installation location.  This tarfile is assumed t
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Dmitry Nedospasov, http://nedos.net/
+ Stéphane Jourdois
 
 =cut
 
-
 =head1 LICENSE
 
-Copyright (c) 2005-2009 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -116,7 +117,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.2rc1';
+my $RELEASE = '4.2';
 
 
 #
@@ -245,17 +246,6 @@ if ( defined( $CONFIG{ 'install-method' } ) &&
             exit 1;
         }
 
-        # Do we need an URL specified as the installation source?
-        if ( ( $installer->{ 'needURL' } ) &&
-             ( !$CONFIG{ 'install-source' } ||
-                ( $CONFIG{ 'install-source' } !~ /^http/i ) ) )
-        {
-            print "Please specify the image server URL with --install-source\n";
-            exit 1;
-        }
-
-
-
         #
         #  Now we can call the appropriate handler.
         #
@@ -266,16 +256,9 @@ if ( defined( $CONFIG{ 'install-method' } ) &&
         #
         #  Test that we have some "standard" files present.
         #
-        foreach my $file (qw( /bin/ls /bin/cp ))
-        {
-            if ( !-x $CONFIG{ 'location' } . $file )
-            {
-                print "The installation of the new system has failed.\n";
-                print "\n";
-                print "The system is missing the common file: $file\n";
-                exit 1;
-            }
-        }
+
+        checkForCommonFilesInChroot($CONFIG{ 'location' },
+                                    "installed system");
 
         #
         #  All done.
@@ -409,6 +392,7 @@ sub parseCommandLineArguments
         # Misc
         "arch=s",   \$CONFIG{ 'arch' },
         "cache=s",  \$CONFIG{ 'cache' },
+        "cachedir=s", \$CONFIG{ 'cachedir' },
         "config=s", \$CONFIG{ 'config' },
         "mirror=s", \$CONFIG{ 'mirror' },
 
@@ -543,6 +527,30 @@ EOF
 
 
 
+=begin doc
+
+  Check if there are some common files in some chroot
+
+=end doc
+
+=cut
+
+sub checkForCommonFilesInChroot {
+    my ($chroot, $what) = @_;
+    foreach my $file (qw( /bin/ls /bin/cp ))
+    {
+        if ( !-x $chroot.$file )
+        {
+            print STDERR <<EOT;
+WARNING ($0): The $what at $chroot doesn\'t seem to be a full system.
+WARNING ($0): The $what is missing the common file: $file.
+EOT
+        }
+    }
+}
+
+
+
 =begin doc
 
   A utility method to run a system command.  We will capture the return
@@ -650,6 +658,12 @@ sub copyDebFiles
 sub do_copy
 {
 
+    #
+    #  Check if the copy source has at least some "standard" files present.
+    #
+    checkForCommonFilesInChroot($CONFIG{ 'install-source' },
+                                "installation source");
+
     #
     #  Find the copy command to run from the configuration file.
     #
@@ -690,17 +704,18 @@ sub do_debootstrap
     # to use cdebootstrap.
     #
     my $cmd = $CONFIG{ 'debootstrap-cmd' };
+    my $cachedir = $CONFIG{ 'cachedir' };
     if ( !$cmd )
     {
-	if (-x '/usr/sbin/debootstrap') {
-	    $cmd = '/usr/sbin/debootstrap';
-	} elsif (-x '/usr/sbin/cdebootstrap') {
-	    $cmd = '/usr/sbin/cdebootstrap';
-	} else {
-	    print STDERR "Found neither debootstrap nor cdebootstrap and no --debootstrap-cmd given\n";
-	    exit 1;
-	}
-	print "Using $cmd as debootstrap command\n";
+        if (-x '/usr/sbin/debootstrap') {
+            $cmd = '/usr/sbin/debootstrap';
+        } elsif (-x '/usr/sbin/cdebootstrap') {
+            $cmd = '/usr/sbin/cdebootstrap';
+        } else {
+            print STDERR "Found neither debootstrap nor cdebootstrap and no --debootstrap-cmd given\n";
+            exit 1;
+        }
+        print "Using $cmd as debootstrap command\n";
     }
 
 
@@ -711,8 +726,16 @@ sub do_debootstrap
     if ( $CONFIG{ 'cache' } eq "yes" )
     {
         print "\nCopying files from host to image.\n";
+        unless( -d $cachedir ) {
+            my $xtcache = '/var/cache/xen-tools/archives/';
+            print("$cachedir not found, defaulting to $xtcache\n");
+            unless ( -d $xtcache ) {
+                system "mkdir -p $xtcache";
+            }
+            $cachedir = $xtcache;
+        }
         runCommand("mkdir -p $CONFIG{'location'}/var/cache/apt/archives");
-        copyDebFiles( "/var/cache/apt/archives",
+        copyDebFiles( "$cachedir",
                       "$CONFIG{'location'}/var/cache/apt/archives" );
         print("Done\n");
     }
@@ -755,7 +778,7 @@ sub do_debootstrap
     {
         print "\nCopying files from new installation to host.\n";
         copyDebFiles( "$CONFIG{'location'}/var/cache/apt/archives",
-                      "/var/cache/apt/archives" );
+                      "$cachedir" );
         print("Done\n");
     }
 

debian/NEWS

@@ -1,5 +1,14 @@
 xen-tools (4.2~rc1-1) unstable; urgency=low
 
+  By default, xen-create-image now generates a random root password and
+  displays it as plain text at the end of the DomU generation process.
+  Use --genpass=0 and --passwd=1 to interactively set a root password
+  without the password being displayed.
+
+ -- Axel Beckert <abe@debian.org>  Tue, 03 Aug 2010 16:14:42 +0200
+
+xen-tools (4.2~beta1-1) unstable; urgency=low
+
   If the DomU hangs with "Waiting for root file system" despite
   /dev/xvd* is used as disk device, adding "xen-blkfront" to
   /etc/initramfs-tools/modules and runing "update-initramfs -u"
@@ -14,5 +23,5 @@ xen-tools (4.2~rc1-1) unstable; urgency=low
   /etc/apt/sources.list (if it exists) and taking the first entry with
   path ending in /debian/ there.
 
- -- Axel Beckert <abe@debian.org>  Sat, 15 May 2010 18:04:14 +0200
+ -- Axel Beckert <abe@debian.org>  Sun, 30 May 2010 22:36:16 +0200
 

debian/README.source

@@ -9,6 +9,7 @@ $ cd xen-tools
 
 If you just want to build the binary package, run
 
+$ make changelog
 $ dpkg-buildpackage -uc -us -b
 
 If you want to build source and binary packages, e.g. for an upload to
@@ -18,4 +19,4 @@ $ make orig-tar-gz
 $ dpkg-buildpackage
 
 
- -- Axel Beckert <abe@debian.org>, Mon, 17 May 2010 13:31:31 +0200
+ -- Axel Beckert <abe@debian.org>, Mon, 13 Sep 2010 14:30:05 +0200

debian/changelog

@@ -1,8 +1,56 @@
-xen-tools (4.2~rc1-1) UNRELEASED; urgency=low
+xen-tools (4.2-1) unstable; urgency=low
+
+  * New upstream release
+    - Fixes several cases of broken or incomplete config files with
+      unexpected or seldom parameter combinations. (Closes: #484652)
+    - Updates examples in /etc/xen-tools.conf to better reflect current
+      state
+    - Allows usage of xvc* as serial console as used as default by older
+      Xen versions.
+    - Preliminary support for Ubuntu 11.04 (Natty) and Debian 7.0 (Wheezy)
+      (Closes: #597521)
+    - Switches default mirror for EoL'ed Ubuntu 8.10 (Intrepid) and Debian
+      4.0 (Etch) to the distributions' archives for old releases.
+  * Does no more try extract the upstream changelog during debian package
+    build. The commit which introduced this problem has been reverted.
+    Document more clearly in debian/README.source how to build the package
+    from a checked out copy of the git repository, especially that the
+    upstream changelog has to be generated first out of the VCS log.
+    (Closes: #595883)
+  * Update debian/copyright: Add Stéphane Jourdois to list of authors.
+
+ -- Axel Beckert <abe@debian.org>  Tue, 05 Oct 2010 19:01:49 +0200
+
+xen-tools (4.2~rc1-1) unstable; urgency=low
+
+  [Axel Beckert]
+  * New upstream release candidate
+    - Uses GeoIP for Debian mirrors: Default Debian mirror is now
+      cdn.debian.net, see http://wiki.debian.org/DebianGeoMirror for
+      details.
+    - Uses the same 15-disable-hwclock hook for Debian as for Ubuntu DomUs
+      (Closes: #588880)
+    - Mounts not only /proc but also /dev/pts automatically before running
+      any customisation hooks (Closes: #588783)
+    - Uses apt-config to parse Dom0's apt.conf. (Closes: #560011)
+    - Fixes wrong loop module parameter syntax in warning. Thanks to
+      Daniel Baumann for spotting this. (Closes: #516902)
+    - With --verbose, the output of commands called by xen-tools
+      (e.g. debootstrap) is not only logged, but also printed to
+      STDOUT. (Closes: #513126)
+    - Adds btrfs support.
+  * Bump Standards-Version to 3.9.1 (no changes)
+
+  [Stéphane Jourdois]
+  * [debian/control] Suggest btrfs-tools
+
+ -- Axel Beckert <abe@debian.org>  Sun, 15 Aug 2010 19:34:38 +0200
+
+xen-tools (4.2~beta1-1) unstable; urgency=low
 
   * New maintainer and upstream authors
   * Reintroduction into Debian Unstable (Closes: #566714)
-  * New upstream release candidate
+  * New upstream beta version
     - Needs dependency on libfile-slurp-perl
     - Supports for more recent versions of Fedora, Ubuntu and Debian
       (Closes: #499477)
@@ -41,6 +89,7 @@ xen-tools (4.2~rc1-1) UNRELEASED; urgency=low
     - Checks for debootstrap and cdebootstrap, uses debootstrap if both
       are installed (Changed "Depends: debootstrap" to "Depends:
       debootstrap | cdebootstrap" in debian/control)
+    - Added new files TODO and KNOWN_BUGS to debian/docs.
   * Removal of /etc/bash_completion.d/xm from the package since
     bash-completion ships a more elaborate version of that file. (Closes:
     #566683, #550590, LP: #538917, #484098)
@@ -65,7 +114,7 @@ xen-tools (4.2~rc1-1) UNRELEASED; urgency=low
     the Git repository.
   * Overhauled package description
 
- -- Axel Beckert <abe@debian.org>  Mon, 17 May 2010 13:32:04 +0200
+ -- Axel Beckert <abe@debian.org>  Sun, 30 May 2010 22:32:30 +0200
 
 xen-tools (4.1-1) unstable; urgency=low
 

debian/control

@@ -3,7 +3,7 @@ Section: utils
 Priority: extra
 Maintainer: Axel Beckert <abe@debian.org>
 Build-Depends: debhelper (>= 7.0.0), libtest-pod-perl, libtext-template-perl
-Standards-Version: 3.8.4
+Standards-Version: 3.9.1
 Homepage: http://xen-tools.org/software/xen-tools
 Vcs-Browser: http://gitorious.org/xen-tools/xen-tools
 Vcs-Git: git://gitorious.org/xen-tools/xen-tools.git
@@ -12,7 +12,7 @@ Package: xen-tools
 Architecture: all
 Depends: debootstrap | cdebootstrap, perl-modules, libtext-template-perl, libconfig-inifiles-perl, libfile-slurp-perl, ${misc:Depends}
 Recommends: xen-hypervisor-amd64 | xen-hypervisor-i386 | xen-hypervisor-i386-pae, rinse, xen-shell, libexpect-perl
-Suggests: reiserfsprogs, xfsprogs, xen-utils, cfengine2, evms-cli
+Suggests: reiserfsprogs, xfsprogs, xen-utils, cfengine2, evms-cli, btrfs-tools
 Description: Tools to manage Xen virtual servers
  This package contains tools to manage Debian based Xen virtual servers.
  .

debian/copyright

@@ -4,7 +4,10 @@ Tue, 20 Dec 2005 02:21:05 +0200.
 It was downloaded from http://xen-tools.org/software/xen-tools/
 
 Copyright 2005-2009: Steve Kemp <steve@steve.org.uk>
-Copyright 2010: Axel Beckert <abe@deuxchevaux.org>
+Copyright 2010: The Xen-Tools Development Team, currently consisting of:
+		Axel Beckert <abe@deuxchevaux.org>,
+		Dmitry Nedospasov <dmitry@nedos.net>, and
+		Stéphane Jourdois <sjourdois@gmail.com>
 
 License:
 

debian/docs

@@ -2,4 +2,5 @@ AUTHORS
 README
 SUPPORT
 BUGS
-TODO
+TODO
+KNOWN_BUGS

etc/xen-tools.conf

@@ -107,13 +107,13 @@ install-method = debootstrap
 # (This allows you to install from a .tar.bz file, rather than a plain
 # tar file, use cdebootstrap, etc.)
 #
-# install-method=copy:
+# install-method = copy:
 # copy-cmd = /bin/cp -a $src/* $dest
 #
-# install-method=debootstrap:
-# debootstrap-cmd=/usr/sbin/debootstrap
+# install-method = debootstrap:
+# debootstrap-cmd = /usr/sbin/debootstrap
 #
-# install-method=tar:
+# install-method = tar:
 # tar-cmd  = /bin/tar --numeric-owner -xvf $src
 #
 #
@@ -130,24 +130,13 @@ memory = 128Mb    # Memory size
 swap   = 128Mb    # Swap size
 # noswap = 1      # Don't use swap at all for the new system.
 fs     = ext3     # use the EXT3 filesystem for the disk image.
-dist   = `xt-guess-suite-and-mirror -s` # Default distribution to install.
+dist   = `xt-guess-suite-and-mirror --suite` # Default distribution to install.
 image  = sparse   # Specify sparse vs. full disk images.
 
 #
-#  Currently supported and tested distributions include:
-#
-# via Debootstrap:
-#
-#  Debian:
-#   sid, sarge, etch, lenny.
-#
-#  Ubuntu:
-#   edgy, feisty, dapper.
-#
-# via Rinse:
-#   centos-4, centos-5.
-#   fedora-core-4, fedora-core-5, fedora-core-6, fedora-core-7
-#
+#  See the README for currently supported and tested distributions. You can
+# either find it in the root directory of the unpacked source or, on Debian
+# and Ubuntu based systems, in /usr/share/doc/xen-tools/README.gz
 #
 
 
@@ -160,14 +149,30 @@ image  = sparse   # Specify sparse vs. full disk images.
 # Uncomment and adjust these network settings if you wish to give your
 # new instances static IP addresses.
 #
-# gateway   = 192.168.1.1
-# netmask   = 255.255.255.0
-# broadcast = 192.168.1.255
+# gateway    = 192.168.1.1
+# netmask    = 255.255.255.0
+# broadcast  = 192.168.1.255
 #
 # Uncomment this if you wish the images to use DHCP
 #
 # dhcp = 1
 
+#
+# Uncomment and adjust this setting if you wish to give your new
+# instances a specific nameserver.
+#
+# By default, nameserver is not set, and Dom0's /etc/resolv.conf will
+# be copied to guest.
+#
+# nameserver = 192.168.1.1
+#
+
+#
+# Setup bridge name for host vif. Usefull if you use bridged networking
+# for guests.
+#
+# bridge = xendmz
+#
 
 ##
 # Misc options
@@ -181,10 +186,41 @@ image  = sparse   # Specify sparse vs. full disk images.
 #
 
 #
-# Uncomment the following line if you wish to interactively setup
-# a new root password for images.
+# The default cachedir is, /var/cache/apt/archives/, however if it
+# does not exist it will default to /var/cache/xen-tools/archives/
+# Uncomment the line below to set it to something else.
+#
+# cachedir = /var/cache/xen-tools/archives/
+#
+
+#
+# Uncomment the following line if you wish not to generate a new root
+# password for the new guest.
+#
+# genpass = 0
+#
+
+#
+# You can also change the password length by uncommenting and
+# changing the line below
+#
+# genpass_len = 8
+#
+
+#
+# You can yet change the hashing method to encrypt the generated
+# password by changing the line below.
+# Valid values : md5, sha256 and sha512.
+#
+# hash_method = sha256
+#
+
+#
+# Uncomment the following line if you wish to interactively setup a
+# new root password for images.
 #
 # passwd = 1
+#
 
 #
 # If you'd like all accounts on your host system which are not present
@@ -196,8 +232,8 @@ image  = sparse   # Specify sparse vs. full disk images.
 #
 # Default kernel and ramdisk to use for the virtual servers
 #
-kernel      = /boot/vmlinuz-`uname -r`
-initrd      = /boot/initrd.img-`uname -r`
+kernel = /boot/vmlinuz-`uname -r`
+initrd = /boot/initrd.img-`uname -r`
 
 #
 #  The architecture to use when using debootstrap, rinse, or rpmstrap.
@@ -205,13 +241,13 @@ initrd      = /boot/initrd.img-`uname -r`
 #  This is most useful on 64 bit host machines, for other systems it
 # doesn't need to be used.
 #
-# arch=[i386|amd64]
+# arch = [i386|amd64]
 #
 
 #
 # The default mirror for debootstrap to install Debian-derived distributions
 #
-mirror = `xt-guess-suite-and-mirror -m`
+mirror = `xt-guess-suite-and-mirror --mirror`
 
 #
 # A mirror suitable for use when installing the Dapper release of Ubuntu.
@@ -221,24 +257,36 @@ mirror = `xt-guess-suite-and-mirror -m`
 #
 #  If you like you could use per-distribution mirrors, which will
 # be more useful if you're working in an environment where you want
-# to regularly use multiple distributions:
+# to regularly use multiple distributions. The following are the
+# default values used (for Debian the GeoIP feature is used, see
+# http://wiki.debian.org/DebianGeoMirror):
 #
-# mirror_sid=http://ftp.us.debian.org/debian
-# mirror_sarge=http://ftp.us.debian.org/debian
-# mirror_etch=http://ftp.us.debian.org/debian
-# mirror_dapper=http://archive.ubuntu.com/ubuntu
-# mirror_edgy=http://archive.ubuntu.com/ubuntu
-# mirror_feisty=http://archive.ubuntu.com/ubuntu
-# mirror_gutsy=http://archive.ubuntu.com/ubuntu
+# mirror_sarge = http://archive.debian.org/debian
+# mirror_etch = http://archive.debian.org/debian
+# mirror_lenny = http://cdn.debian.net/debian
+# mirror_squeeze = http://cdn.debian.net/debian
+# mirror_wheezy = http://cdn.debian.net/debian
+# mirror_sid = http://cdn.debian.net/debian
+# mirror_dapper = http://archive.ubuntu.com/ubuntu
+# mirror_edgy = http://old-releases.ubuntu.com/ubuntu
+# mirror_feisty = http://old-releases.ubuntu.com/ubuntu
+# mirror_gutsy = http://old-releases.ubuntu.com/ubuntu
+# mirror_hardy = http://archive.ubuntu.com/ubuntu
+# mirror_intrepid = http://old-releases.ubuntu.com/ubuntu
+# mirror_karmic = http://archive.ubuntu.com/ubuntu
+# mirror_lucid = http://archive.ubuntu.com/ubuntu
+# mirror_maverick = http://archive.ubuntu.com/ubuntu
+# mirror_natty = http://archive.ubuntu.com/ubuntu
 
 
 #
 #  Filesystem options for the different filesystems we support.
 #
-ext3_options   = noatime,nodiratime,errors=remount-ro
-ext2_options   = noatime,nodiratime,errors=remount-ro
-xfs_options    = defaults
-reiser_options = defaults
+ext3_options     = noatime,nodiratime,errors=remount-ro
+ext2_options     = noatime,nodiratime,errors=remount-ro
+xfs_options      = defaults
+reiserfs_options = defaults
+btrfs_options    = defaults
 
 #
 #  Uncomment if you wish newly created images to boot once they've been
@@ -274,3 +322,20 @@ reiser_options = defaults
 # output    = /etc/xen
 # extension = .cfg
 #
+
+#
+#  Here you can control weather your dom0's /etc/hosts file should be
+# appended with the new guest, and also if your dom0's /etc/hosts file
+# should be copied to the new guest.
+#
+#  Change the following options to 1 to set them
+# nohosts - don't touch the dom0's /etc/hosts file
+# copyhosts - copy the dom0's /etc/hosts to the guest
+#
+#  by default new guests ARE added to the dom0's /etc/hosts file
+# nohosts = 0 # default
+#
+#  by default the dom0's /etc/hosts IS NOT copied
+# copyhosts = 0 # default
+#
+

etc/xm.tmpl

@@ -63,32 +63,20 @@ memory      = '{$memory}'
 #  Physical volumes
 #
 {
-    if ( ( $swap_vbd ) && ( $image_vbd ) )
-    {
-    $OUT .= "root  = '/dev/$device" . "2 ro'\n";
-
-    $OUT .= "disk  = [ ";
-
     if ( $image_vbd )
     {
-         $OUT .= "'$image_vbd," . $device . "2,w'";
+        $OUT .= "root        = '/dev/$device" . "2 ro'\n";
+        $OUT .= "disk        = [\n";
+        $OUT .= "                  '$image_vbd," . $device . "2,w',\n";
 
-    }
-
-    if ( $swap_vbd )
-    {
-         if ( $image_vbd )
-         {
-            $OUT .= ",";
-         }
-
-         $OUT .= "'$swap_vbd," . $device . "1,w'";
-    }
-    $OUT .= " ]\n";
+        if ( $swap_vbd )
+        {
+            $OUT .= "                  '$swap_vbd," . $device . "1,w',\n";
+        }
+        $OUT .= "              ]\n";
     }
 }
 
-
 #
 #  Hostname
 #

hooks/centos-4/20-setup-yum

@@ -26,11 +26,6 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  DNS is probably required to run "yum update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
 #
 # Update yum
 #

hooks/centos-4/40-setup-networking

@@ -73,6 +73,19 @@ E_O_STATIC
          interface=`expr $interface + 1`
      done
 
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 else
     cat <<E_O_DHCP >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
 DEVICE=eth0

hooks/centos-4/60-copy-host-files

@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-#  Copy files from a 'skel' directory, if present, into the
-# new images
-#
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Copy "required" files from our host.
-#
-# NONE DONE
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installCentOS4Package ${prefix} sudo
-
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished

hooks/centos-4/90-make-fstab

@@ -63,6 +63,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -88,6 +89,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
 
     if [ "${partdata2}" = "swap" ]; then
@@ -108,6 +112,9 @@ done
 #if [ $has_reiserfs -eq 1 ]; then
 #    installDebianPackage ${prefix} reiserfsprogs
 #fi
+#if [ $has_btrfs -eq 1 ]; then
+#    installDebianPackage ${prefix} btrfs-tools
+#fi
 
 
 #

hooks/centos-5/20-setup-yum

@@ -26,12 +26,6 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  DNS is probably required to run "yum update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Update yum
 #

hooks/centos-5/40-setup-networking

@@ -73,6 +73,19 @@ E_O_STATIC
          interface=`expr $interface + 1`
      done
 
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 else
     cat <<E_O_DHCP >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
 DEVICE=eth0

hooks/centos-5/60-copy-host-files

@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-#  Copy files from a 'skel' directory, if present, into the
-# new images
-#
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Copy "required" files from our host.
-#
-# NONE DONE
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installCentOS4Package ${prefix} sudo
-
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished

hooks/centos-5/90-make-fstab

@@ -64,6 +64,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -89,6 +90,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
     
     if [ "${partdata2}" = "swap" ]; then
@@ -109,6 +113,9 @@ done
 #if [ $has_reiserfs -eq 1 ]; then
 #    installDebianPackage ${prefix} reiserfsprogs
 #fi
+#if [ $has_btrfs -eq 1 ]; then
+#    installDebianPackage ${prefix} btrfs-tools
+#fi
 
 
 #

hooks/common.sh

@@ -85,7 +85,7 @@ installDebianPackage ()
     #
     #  Use policy-rc to stop any daemons from starting.
     #
-    printf '#!/bin/bash\nexit 101\n' > ${prefix}/usr/sbin/policy-rc.d
+    printf '#!/bin/sh\nexit 101\n' > ${prefix}/usr/sbin/policy-rc.d
     chmod +x ${prefix}/usr/sbin/policy-rc.d
 
     #
@@ -98,9 +98,7 @@ installDebianPackage ()
     #
     # Install the packages
     #
-    mount -t devpts devpts ${prefix}/dev/pts
     DEBIAN_FRONTEND=noninteractive chroot ${prefix} /usr/bin/apt-get --yes --force-yes install "$@"
-    umount ${prefix}/dev/pts
 
     #
     #  Remove the policy-rc.d script.
@@ -226,18 +224,18 @@ installCentOS4Package ()
 #
 installPackage ()
 {
-	prefix=$1
-	package=$2
+        prefix=$1
+        package=$2
 
-	if [ -x ${prefix}/usr/bin/apt-get ] ; then
-		installDebianPackage "$@"
+        if [ -x ${prefix}/usr/bin/apt-get ] ; then
+                installDebianPackage "$@"
 
-	elif [ -x ${prefix}/usr/bin/yum ] ; then
-		installCentOS4Package "$@"
+        elif [ -x ${prefix}/usr/bin/yum ] ; then
+                installCentOS4Package "$@"
 
-	else
-		logMessage "Unable to install package ${package}; no package manager found"
-	fi
+        else
+                logMessage "Unable to install package ${package}; no package manager found"
+        fi
 }
 
 

hooks/dapper/20-setup-apt

@@ -28,36 +28,19 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  You will probably need DNS to run "apt-get update"
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Attempt to auto-magically detect the use of a Proxy for apt-get, and
-# replicate that setup in our new guest.
+# replicate that setup in our new guest via apt-config dump and save
+# the setting to the proxy guess file.
 #
+logMessage The use of a proxy detected.
+apt-config dump | grep -i Acquire::HTTP::Proxy \
+    > ${prefix}/etc/apt/apt.conf.d/proxy-guess
+
+
 #
-#  Process any of the present apt-conf setup lines.
+# Setup the sources.list file for new installations of Ubuntu GNU/Linux.
 #
-for i in /etc/apt/apt.conf /etc/apt/apt.conf.d/* ; do 
-
-    #
-    # If the file exists.  (Need this in case the literal glob fails.)
-    #
-    if [ -e $i ] ; then
-
-        #
-        # Save the matching line(s) to the proxy guess file.
-        #
-        logMessage The use of a proxy detected.
-        grep -i HTTP::Proxy $i >> ${prefix}/etc/apt/apt.conf.d/proxy-guess
-    fi
-done
-
-
-
 cat <<E_O_APT > ${prefix}/etc/apt/sources.list
 #
 #  /etc/apt/sources.list

hooks/dapper/40-setup-networking

@@ -112,6 +112,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/dapper/50-setup-hostname

@@ -27,37 +27,47 @@ fi
 #
 logMessage Script $0 starting
 
+#
+#  Determine the FQDN and Hostname
+#
+GUEST_FQDN=${hostname}
+GUEST_HOSTNAME=`echo $GUEST_FQDN | awk -F'.' '{print $1}'`
 
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} | sed 's/^\([^\.]*\)\..*/\1/' > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
+echo $GUEST_HOSTNAME > ${prefix}/etc/hostname
+echo $GUEST_FQDN > ${prefix}/etc/mailname
 
 
 #
 #  Fixup the /etc/hosts file upon the new image for
 # machines with static IPs
 #
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-    echo "${ip1}    ${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
+if [ -z "${copyhosts}" ]; then
     #
-    #  Stub /etc/hosts for DHCP clients.
+    #  Copy localhost
     #
+    cat > ${prefix}/etc/hosts <<EOF
+127.0.0.1    localhost
+EOF
+    #
+    #  Make sure our hostname and FQDN is resolvable
+    #
+    if [ -z "${dhcp}" ]; then
+        #
+        #  If dhcp is diabled, FQDN should resolve to our IP
+        #
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    else
+        cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    fi
+
     cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1       localhost
 
 # The following lines are desirable for IPv6 capable hosts
 ::1     ip6-localhost ip6-loopback
@@ -69,7 +79,25 @@ ff02::3 ip6-allhosts
 
 EOF
 
+else
+    # Non-IPv6 stuff.
+    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
 
+    # New entry.
+    if [ -z "${dhcp}" ]; then
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    else
+    cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    fi
+
+    # IPv6 stuff.
+    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
 fi
 
 
@@ -78,22 +106,15 @@ fi
 #
 if [ -z "${dhcp}" ]; then
 
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
+    if ( grep $GUEST_FQDN /etc/hosts > /dev/null ) ; then
 
-        logMessage Host already has IP address for the host ${hostname}.
+        logMessage Host already has IP address for the host $GUEST_FQDN.
 
     else
-
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
-
         if [ -z "${nohosts}" ]; then
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-
+            logMessage Adding $GUEST_FQDN and $GUEST_HOSTNAME to /etc/hosts on the host
+            echo "${ip1}    $GUEST_FQDN $GUEST_HOSTNAME" >> /etc/hosts
 
             #
             #  If we've updated the /etc/hosts file on the host machine
@@ -101,12 +122,12 @@ if [ -z "${dhcp}" ]; then
             # reload it.
             #
             #  This will let the local LAN clients lookup the new address.
-             #
+            #
             if [ -x /usr/sbin/dnsmasq ] ; then
                 if [ -e /var/run/dnsmasq.pid ]; then
 
-                logMessage Allowing DNSMasq to restart.
-                kill -s HUP `cat /var/run/dnsmasq.pid`
+                    logMessage Allowing DNSMasq to restart.
+                    kill -s HUP `cat /var/run/dnsmasq.pid`
                 fi
             fi
         fi

hooks/dapper/60-copy-host-files

@@ -30,28 +30,6 @@ logMessage Script $0 starting
 cp /etc/timezone    ${prefix}/etc
 cp /etc/localtime   ${prefix}/etc
 
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
-
 
 #
 #  Log our finish

hooks/dapper/70-install-ssh

@@ -1,18 +1,17 @@
 #!/bin/sh
 #
-#  This script installs OpenSSH upon the new system.
+#  This script installs OpenSSH Server on the newly created guest.
 #
-#  It must make sure that the server is not running before it exits 
-# otherwise the temporary mounted directory will not be unmountable.
+#  It does this by generating the keys within the host, since guests
+# do not have the necessary /dev/random and /dev/urandom to generate
+# their own keys before boot.
 #
-# Steve
+# Dmitry Nedospasov
 # --
-# http://www.steve.org.uk/
-
+# http://nedos.net/
 
 prefix=$1
 
-
 #
 #  Source our common functions
 #
@@ -22,21 +21,43 @@ else
     . ./hooks/common.sh
 fi
 
-
 #
 # Log our start
 #
 logMessage Script $0 starting
 
+#
+#  Since our guests doesn't have an RNG, generate the keys from the host
+#
+#  First, create an ssh directory
+#
+mkdir -p ${prefix}/etc/ssh
+
+#
+#  Second, Generate the Host RSA Key
+#
+if ssh-keygen -t rsa -N "" -f ${prefix}/etc/ssh/ssh_host_rsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host RSA"
+else
+    logMessage "failed to generate Host RSA Key"
+fi
+
+#
+#  Third, Generate the Host DSA Key
+#
+if ssh-keygen -t dsa -N "" -f ${prefix}/etc/ssh/ssh_host_dsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host DSA"
+else
+    logMessage "failed to generate Host DSA Key"
+fi
 
 #
 #  Install ssh
 #
-installDebianPackage ${prefix} ssh
-
-
+installDebianPackage ${prefix} openssh-server
 
 #
-#  Log our finish
+# Log our finish
 #
 logMessage Script $0 finished
+

hooks/dapper/90-make-fstab

@@ -60,6 +60,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -85,6 +86,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
 
     if [ "${partdata2}" = "swap" ]; then
@@ -105,6 +109,9 @@ fi
 if [ $has_reiserfs -eq 1 ]; then
     installDebianPackage ${prefix} reiserfsprogs
 fi
+if [ $has_btrfs -eq 1 ]; then
+    installDebianPackage ${prefix} btrfs-tools
+fi
 
 
 #

hooks/debian/15-disable-hwclock

@@ -29,23 +29,10 @@ logMessage Script $0 starting
 #
 #  Disable the startup scripts from all runlevels.
 #
-if [ -x ${prefix}/etc/init.d/hwclock.sh ]; then
-
-    chmod -x ${prefix}/etc/init.d/hwclock.sh
-else
-
-    logMessage "/etc/init.d/hwclock.sh not found.  skipping."
-fi
-if [ -x ${prefix}/etc/init.d/hwclockfirst.sh ]; then
-
-    chmod -x ${prefix}/etc/init.d/hwclockfirst.sh
-else
-
-    logMessage "/etc/init.d/hwclockfirst.sh not found.  skipping."
-fi
-
+chroot ${prefix} /usr/sbin/update-rc.d -f hwclock.sh remove
 
 #
 # Log our finish
 #
-logMessage Script $0 finished.
+logMessage Script $0 finished.
+

hooks/debian/20-setup-apt

@@ -27,34 +27,14 @@ fi
 logMessage Script $0 starting
 
 
-#
-# You'll probably need DNS to run "apt-get update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Attempt to auto-magically detect the use of a Proxy for apt-get, and
-# replicate that setup in our new guest.
+# replicate that setup in our new guest via apt-config dump and save
+# the setting to the proxy guess file.
 #
-#
-#  Process any of the present apt-conf setup lines.
-#
-for i in /etc/apt/apt.conf /etc/apt/apt.conf.d/* ; do 
-
-    #
-    # If the file exists.  (Need this in case the literal glob fails.)
-    #
-    if [ -e $i ] ; then
-
-        #
-        # Save the matching line(s) to the proxy guess file.
-        #
-        logMessage The use of a proxy detected.
-        grep -i HTTP::Proxy $i >> ${prefix}/etc/apt/apt.conf.d/proxy-guess
-    fi
-done
-
+logMessage The use of a proxy detected.
+apt-config dump | grep -i Acquire::HTTP::Proxy \
+    > ${prefix}/etc/apt/apt.conf.d/proxy-guess
 
 
 #
@@ -79,7 +59,7 @@ E_O_APT
 #  If the host system has security support then enable that here, too,
 #  except if we're installing Debian Unstable.
 #
-if ( test "${dist}" '!=' 'sid' && test "${dist}" '!=' 'unstable' && \
+if ( test "${dist}" "!=" "sid" && test "${dist}" "!=" "unstable" && \
      test -e /etc/apt/sources.list && \
      grep ^deb.*security -r /etc/apt/sources.list /etc/apt/sources.list.d >/dev/null 2>/dev/null ) ; then
 

hooks/debian/40-setup-networking

@@ -132,6 +132,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/debian/50-setup-hostname

@@ -27,42 +27,47 @@ fi
 #
 logMessage Script $0 starting
 
+#
+#  Determine the FQDN and Hostname
+#
+GUEST_FQDN=${hostname}
+GUEST_HOSTNAME=`echo $GUEST_FQDN | awk -F'.' '{print $1}'`
 
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} | sed 's/^\([^\.]*\)\..*/\1/' > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
+echo $GUEST_HOSTNAME > ${prefix}/etc/hostname
+echo $GUEST_FQDN > ${prefix}/etc/mailname
 
 
 #
 #  Fixup the /etc/hosts file upon the new image for
 # machines with static IPs
 #
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-	# TODO: Think of a better way of doing this, this may have a lot of trash
-	# depending on the dom0 (i.e. 127.0.0.1 dom0.example.com)
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-	# echo "127.0.0.1	localhost" >> ${prefix}/etc/hosts
-    echo "127.0.1.1	$(echo ${hostname} | awk -F '.' '{ print $1 }')" >> ${prefix}/etc/hosts
-    echo "${ip1}	${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
+if [ -z "${copyhosts}" ]; then
     #
-    #  Stub /etc/hosts for DHCP clients.
+    #  Copy localhost
     #
+    cat > ${prefix}/etc/hosts <<EOF
+127.0.0.1    localhost
+EOF
+    #
+    #  Make sure our hostname and FQDN is resolvable
+    #
+    if [ -z "${dhcp}" ]; then
+        #
+        #  If dhcp is diabled, FQDN should resolve to our IP
+        #
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    else
+        cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    fi
+
     cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1	localhost
-127.0.1.1	$(echo ${hostname} | awk -F '.' '{ print $1 }') ${hostname}
 
 # The following lines are desirable for IPv6 capable hosts
 ::1     ip6-localhost ip6-loopback
@@ -74,7 +79,25 @@ ff02::3 ip6-allhosts
 
 EOF
 
+else
+    # Non-IPv6 stuff.
+    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
 
+    # New entry.
+    if [ -z "${dhcp}" ]; then
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    else
+    cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    fi
+
+    # IPv6 stuff.
+    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
 fi
 
 
@@ -83,21 +106,15 @@ fi
 #
 if [ -z "${dhcp}" ]; then
 
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
+    if ( grep $GUEST_FQDN /etc/hosts > /dev/null ) ; then
 
-        logMessage Host already has IP address for the host ${hostname}.
+        logMessage Host already has IP address for the host $GUEST_FQDN.
 
     else
-
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
-
         if [ -z "${nohosts}" ]; then
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
+            logMessage Adding $GUEST_FQDN and $GUEST_HOSTNAME to /etc/hosts on the host
+            echo "${ip1}    $GUEST_FQDN $GUEST_HOSTNAME" >> /etc/hosts
 
             #
             #  If we've updated the /etc/hosts file on the host machine

hooks/debian/55-create-dev

@@ -33,8 +33,8 @@ MAKEDEV=''
 MAKEDEV_PATHS="/sbin/MAKEDEV /dev/MAKEDEV"
 for MAKEDEV_PATH in ${MAKEDEV_PATHS}; do
     if [ -x "${prefix}${MAKEDEV_PATH}" ]; then
-	MAKEDEV="${prefix}${MAKEDEV_PATH}"
-	break
+    MAKEDEV="${prefix}${MAKEDEV_PATH}"
+    break
     fi
 done
 

hooks/debian/60-copy-host-files

@@ -31,29 +31,6 @@ cp /etc/timezone    ${prefix}/etc
 cp /etc/localtime   ${prefix}/etc
 
 
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
-
-
 #
 #  Log our finish
 #

hooks/debian/70-install-ssh

@@ -1,18 +1,17 @@
 #!/bin/sh
 #
-#  This script installs OpenSSH upon the new system.
+#  This script installs OpenSSH Server on the newly created guest.
 #
-#  It must make sure that the server is not running before it exits 
-# otherwise the temporary mounted directory will not be unmountable.
+#  It does this by generating the keys within the host, since guests
+# do not have the necessary /dev/random and /dev/urandom to generate
+# their own keys before boot.
 #
-# Steve
+# Dmitry Nedospasov
 # --
-# http://www.steve.org.uk/
-
+# http://nedos.net/
 
 prefix=$1
 
-
 #
 #  Source our common functions
 #
@@ -22,20 +21,43 @@ else
     . ./hooks/common.sh
 fi
 
-
 #
 # Log our start
 #
 logMessage Script $0 starting
 
+#
+#  Since our guests doesn't have an RNG, generate the keys from the host
+#
+#  First, create an ssh directory
+#
+mkdir -p ${prefix}/etc/ssh
+
+#
+#  Second, Generate the Host RSA Key
+#
+if ssh-keygen -t rsa -N "" -f ${prefix}/etc/ssh/ssh_host_rsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host RSA"
+else
+    logMessage "failed to generate Host RSA Key"
+fi
+
+#
+#  Third, Generate the Host DSA Key
+#
+if ssh-keygen -t dsa -N "" -f ${prefix}/etc/ssh/ssh_host_dsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host DSA"
+else
+    logMessage "failed to generate Host DSA Key"
+fi
 
 #
 #  Install ssh
 #
 installDebianPackage ${prefix} openssh-server
 
-
 #
-#  Log our finish
+# Log our finish
 #
 logMessage Script $0 finished
+

hooks/debian/80-install-kernel

@@ -33,25 +33,25 @@ logMessage Script $0 starting
 #
 
 if [ "${arch}" = "i386" ]; then
-	XEN_ARCH="686"
+    XEN_ARCH="686"
 elif [ "${arch}" = "amd64" ]; then
-	XEN_ARCH="amd64"
+    XEN_ARCH="amd64"
 elif [ -z "${arch}" ]; then
-	UNAME_ARCH=`uname -m`
-	if [ "${UNAME_ARCH}" = "i686" ]; then
-		XEN_ARCH="686"
-	elif [ "${UNAME_ARCH}" = "x86_64" ]; then
-		XEN_ARCH="amd64"
-	else
-		logMessage Unknown kernel architecture ${UNAME_ARCH}.
-		logMessage Please report this as bug to xen-tools-dev@xen-tools.org.
-		logMessage Script $0 failed
-		exit 1
-	fi
+    UNAME_ARCH=`uname -m`
+    if [ "${UNAME_ARCH}" = "i686" ]; then
+        XEN_ARCH="686"
+    elif [ "${UNAME_ARCH}" = "x86_64" ]; then
+        XEN_ARCH="amd64"
+    else
+        logMessage Unknown kernel architecture ${UNAME_ARCH}.
+        logMessage Please report this as bug to xen-tools-dev@xen-tools.org.
+        logMessage Script $0 failed
+        exit 1
+    fi
 else
-	logMessage Unknown kernel architecture ${arch}
-	logMessage Script $0 failed
-	exit 1
+    logMessage Unknown kernel architecture ${arch}
+    logMessage Script $0 failed
+    exit 1
 fi
 
 #
@@ -68,19 +68,19 @@ if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_XEN_PKG > /dev/null 2>&1; th
     installDebianPackage ${prefix} $KERNEL_XEN_PKG
 
 else
-	logMessage Package $KERNEL_XEN_PKG is not available
-	logMessage Attempting to install the $KERNEL_PKG kernel image
-	logMessage WARNING: This kernel may not have pvops
-	if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_PKG > /dev/null 2>&1; then
-		logMessage Package $KERNEL_PKG is available - installing
-	    installDebianPackage ${prefix} initramfs-tools
-	    installDebianPackage ${prefix} $KERNEL_PKG
-	else
-		logMessage Package $KERNEL_PKG is not available
-		logMessage pygrub set, but kernel could not be installed
-		logMessage Script $0 failed
-		exit 1
-	fi
+    logMessage Package $KERNEL_XEN_PKG is not available
+    logMessage Attempting to install the $KERNEL_PKG kernel image
+    logMessage WARNING: This kernel may not have pvops
+    if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_PKG > /dev/null 2>&1; then
+        logMessage Package $KERNEL_PKG is available - installing
+        installDebianPackage ${prefix} initramfs-tools
+        installDebianPackage ${prefix} $KERNEL_PKG
+    else
+        logMessage Package $KERNEL_PKG is not available
+        logMessage pygrub set, but kernel could not be installed
+        logMessage Script $0 failed
+        exit 1
+    fi
 fi
 
 DOMU_KERNEL=$(basename $(ls -1 ${prefix}/boot/vmlinuz* | tail -n 1))
@@ -93,10 +93,10 @@ DOMU_ISSUE=$(sed -re "s/ *\\\.*//g" -e1q < ${prefix}/etc/issue)
 #
 
 if [ -f ${prefix}/boot/$DOMU_RAMDISK ]; then
-	logMessage initrd exists, skipping generation
+    logMessage initrd exists, skipping generation
 else
-	logMessage initrd missing, generating
-	chroot ${prefix} update-initramfs -c -k $KERNEL_REV
+    logMessage initrd missing, generating
+    chroot ${prefix} update-initramfs -c -k $KERNEL_REV
 fi
 
 #

hooks/debian/90-make-fstab

@@ -59,6 +59,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -84,6 +85,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
 
     if [ "${partdata2}" = "swap" ]; then
@@ -104,6 +108,9 @@ fi
 if [ $has_reiserfs -eq 1 ]; then
     installDebianPackage ${prefix} reiserfsprogs
 fi
+if [ $has_btrfs -eq 1 ]; then
+    installDebianPackage ${prefix} btrfs-tools
+fi
 
 
 #

hooks/debian/95-configure-locales

@@ -37,10 +37,10 @@ fi
 #
 installDebianPackage ${prefix} locales
 installDebianPackage ${prefix} util-linux-locales
-
+chroot ${prefix} /usr/sbin/update-locale LANG=C
 
 
 #
 # Log our finish
 #
-logMessage Script $0 finished.
+logMessage Script $0 finished.

hooks/edgy/20-setup-apt

@@ -28,38 +28,19 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  You will probably need DNS to run "apt-get update"
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Attempt to auto-magically detect the use of a Proxy for apt-get, and
-# replicate that setup in our new guest.
+# replicate that setup in our new guest via apt-config dump and save
+# the setting to the proxy guess file.
 #
+logMessage The use of a proxy detected.
+apt-config dump | grep -i Acquire::HTTP::Proxy \
+    > ${prefix}/etc/apt/apt.conf.d/proxy-guess
+
+
 #
-#  Process any of the present apt-conf setup lines.
+# Setup the sources.list file for new installations of Ubuntu GNU/Linux.
 #
-for i in /etc/apt/apt.conf $(run-parts --list /etc/apt/apt.conf.d) ; do
-
-
-    #
-    # If the file exists.  (Need this in case the literal glob fails.)
-    #
-    if [ -e $i ] ; then
-
-        #
-        # Save the matching line(s) to the proxy guess file.
-        #
-        logMessage The use of a proxy detected.
-
-        grep -v '^//' $i | grep -i HTTP::Proxy >>${prefix}/etc/apt/apt.conf.d/proxy-guess
-    fi
-done
-
-
-
 cat <<E_O_APT > ${prefix}/etc/apt/sources.list
 #
 #  /etc/apt/sources.list

hooks/edgy/40-setup-networking

@@ -121,6 +121,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/edgy/50-setup-hostname

@@ -27,37 +27,47 @@ fi
 #
 logMessage Script $0 starting
 
+#
+#  Determine the FQDN and Hostname
+#
+GUEST_FQDN=${hostname}
+GUEST_HOSTNAME=`echo $GUEST_FQDN | awk -F'.' '{print $1}'`
 
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} | sed 's/^\([^\.]*\)\..*/\1/' > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
+echo $GUEST_HOSTNAME > ${prefix}/etc/hostname
+echo $GUEST_FQDN > ${prefix}/etc/mailname
 
 
 #
 #  Fixup the /etc/hosts file upon the new image for
 # machines with static IPs
 #
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-    echo "${ip1}    ${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
+if [ -z "${copyhosts}" ]; then
     #
-    #  Stub /etc/hosts for DHCP clients.
+    #  Copy localhost
     #
+    cat > ${prefix}/etc/hosts <<EOF
+127.0.0.1    localhost
+EOF
+    #
+    #  Make sure our hostname and FQDN is resolvable
+    #
+    if [ -z "${dhcp}" ]; then
+        #
+        #  If dhcp is diabled, FQDN should resolve to our IP
+        #
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    else
+        cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    fi
+
     cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1       localhost
 
 # The following lines are desirable for IPv6 capable hosts
 ::1     ip6-localhost ip6-loopback
@@ -69,7 +79,25 @@ ff02::3 ip6-allhosts
 
 EOF
 
+else
+    # Non-IPv6 stuff.
+    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
 
+    # New entry.
+    if [ -z "${dhcp}" ]; then
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    else
+    cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    fi
+
+    # IPv6 stuff.
+    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
 fi
 
 
@@ -78,20 +106,15 @@ fi
 #
 if [ -z "${dhcp}" ]; then
 
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
+    if ( grep $GUEST_FQDN /etc/hosts > /dev/null ) ; then
 
-        logMessage Host already has IP address for the host ${hostname}.
+        logMessage Host already has IP address for the host $GUEST_FQDN.
 
     else
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
-
         if [ -z "${nohosts}" ]; then
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
+            logMessage Adding $GUEST_FQDN and $GUEST_HOSTNAME to /etc/hosts on the host
+            echo "${ip1}    $GUEST_FQDN $GUEST_HOSTNAME" >> /etc/hosts
 
             #
             #  If we've updated the /etc/hosts file on the host machine

hooks/edgy/60-copy-host-files

@@ -30,28 +30,6 @@ logMessage Script $0 starting
 cp /etc/timezone    ${prefix}/etc
 cp /etc/localtime   ${prefix}/etc
 
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
-
 
 #
 #  Log our finish

hooks/edgy/70-install-ssh

@@ -1,18 +1,17 @@
 #!/bin/sh
 #
-#  This script installs OpenSSH upon the new system.
+#  This script installs OpenSSH Server on the newly created guest.
 #
-#  It must make sure that the server is not running before it exits 
-# otherwise the temporary mounted directory will not be unmountable.
+#  It does this by generating the keys within the host, since guests
+# do not have the necessary /dev/random and /dev/urandom to generate
+# their own keys before boot.
 #
-# Steve
+# Dmitry Nedospasov
 # --
-# http://www.steve.org.uk/
-
+# http://nedos.net/
 
 prefix=$1
 
-
 #
 #  Source our common functions
 #
@@ -22,21 +21,43 @@ else
     . ./hooks/common.sh
 fi
 
-
 #
 # Log our start
 #
 logMessage Script $0 starting
 
+#
+#  Since our guests doesn't have an RNG, generate the keys from the host
+#
+#  First, create an ssh directory
+#
+mkdir -p ${prefix}/etc/ssh
+
+#
+#  Second, Generate the Host RSA Key
+#
+if ssh-keygen -t rsa -N "" -f ${prefix}/etc/ssh/ssh_host_rsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host RSA"
+else
+    logMessage "failed to generate Host RSA Key"
+fi
+
+#
+#  Third, Generate the Host DSA Key
+#
+if ssh-keygen -t dsa -N "" -f ${prefix}/etc/ssh/ssh_host_dsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host DSA"
+else
+    logMessage "failed to generate Host DSA Key"
+fi
 
 #
 #  Install ssh
 #
-installDebianPackage ${prefix} ssh
-
-
+installDebianPackage ${prefix} openssh-server
 
 #
-#  Log our finish
+# Log our finish
 #
 logMessage Script $0 finished
+

hooks/edgy/80-install-kernel

@@ -43,19 +43,19 @@ if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_XEN_PKG > /dev/null 2>&1; th
     installDebianPackage ${prefix} $KERNEL_XEN_PKG
 
 else
-	logMessage Package $KERNEL_XEN_PKG is not available
-	logMessage Attempting to install the $KERNEL_PKG kernel image
-	logMessage WARNING: This kernel may not have pvops
-	if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_PKG > /dev/null 2>&1; then
-		logMessage Package $KERNEL_PKG is available - installing
-	    installDebianPackage ${prefix} initramfs-tools
-	    installDebianPackage ${prefix} $KERNEL_PKG
-	else
-		logMessage Package $KERNEL_PKG is not available
-		logMessage pygrub set, but kernel could not be installed
-		logMessage Script $0 failed
-		exit 1
-	fi
+    logMessage Package $KERNEL_XEN_PKG is not available
+    logMessage Attempting to install the $KERNEL_PKG kernel image
+    logMessage WARNING: This kernel may not have pvops
+    if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_PKG > /dev/null 2>&1; then
+        logMessage Package $KERNEL_PKG is available - installing
+        installDebianPackage ${prefix} initramfs-tools
+        installDebianPackage ${prefix} $KERNEL_PKG
+    else
+        logMessage Package $KERNEL_PKG is not available
+        logMessage pygrub set, but kernel could not be installed
+        logMessage Script $0 failed
+        exit 1
+    fi
 fi
 
 DOMU_KERNEL=$(basename $(ls -1 ${prefix}/boot/vmlinuz* | tail -n 1))
@@ -68,10 +68,10 @@ DOMU_ISSUE=$(sed -re "s/ *\\\.*//g" -e1q < ${prefix}/etc/issue)
 #
 
 if [ -f ${prefix}/boot/$DOMU_RAMDISK ]; then
-	logMessage initrd exists, skipping generation
+    logMessage initrd exists, skipping generation
 else
-	logMessage initrd missing, generating
-	chroot ${prefix} update-initramfs -c -k $KERNEL_REV
+    logMessage initrd missing, generating
+    chroot ${prefix} update-initramfs -c -k $KERNEL_REV
 fi
 
 #

hooks/edgy/90-make-fstab

@@ -60,6 +60,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -85,6 +86,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
 
     if [ "${partdata2}" = "swap" ]; then
@@ -105,6 +109,9 @@ fi
 if [ $has_reiserfs -eq 1 ]; then
     installDebianPackage ${prefix} reiserfsprogs
 fi
+if [ $has_btrfs -eq 1 ]; then
+    installDebianPackage ${prefix} btrfs-tools
+fi
 
 
 #

hooks/fedora-core-6/20-setup-yum

@@ -26,13 +26,6 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  DNS is probably required to run "yum update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
-    
 #
 # Update yum
 #

hooks/fedora-core-6/40-setup-networking

@@ -73,6 +73,19 @@ E_O_STATIC
          interface=`expr $interface + 1`
      done
 
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 else
     cat <<E_O_DHCP >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
 DEVICE=eth0

hooks/fedora-core-6/60-copy-host-files

@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-#  Copy files from a 'skel' directory, if present, into the
-# new images
-#
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Copy "required" files from our host.
-#
-# NONE DONE
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installCentOS4Package ${prefix} sudo
-
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished

hooks/fedora-core-6/90-make-fstab

@@ -63,6 +63,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -88,6 +89,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
 
     if [ "${partdata2}" = "swap" ]; then
@@ -108,6 +112,9 @@ done
 #if [ $has_reiserfs -eq 1 ]; then
 #    installDebianPackage ${prefix} reiserfsprogs
 #fi
+#if [ $has_btrfs -eq 1 ]; then
+#    installDebianPackage ${prefix} btrfs-tools
+#fi
 
 
 #

hooks/gentoo/40-setup-networking

@@ -96,6 +96,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/gentoo/60-copy-host-files

@@ -1,59 +0,0 @@
-#!/bin/sh
-#
-#  Copy files from a 'skel' directory, if present, into the
-# new images
-#
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Copy "required" files from our host.
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/resolv.conf ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished

hooks/gentoo/90-make-fstab

@@ -60,6 +60,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -85,6 +86,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
 
     if [ "${partdata2}" = "swap" ]; then
@@ -105,6 +109,9 @@ done
 #if [ $has_reiserfs -eq 1 ]; then
 #    installDebianPackage ${prefix} reiserfsprogs
 #fi
+#if [ $has_btrfs -eq 1 ]; then
+#    installDebianPackage ${prefix} btrfs-tools
+#fi
 
 
 #

hooks/intrepid/20-setup-apt

@@ -28,38 +28,19 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  You will probably need DNS to run "apt-get update"
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Attempt to auto-magically detect the use of a Proxy for apt-get, and
-# replicate that setup in our new guest.
+# replicate that setup in our new guest via apt-config dump and save
+# the setting to the proxy guess file.
 #
+logMessage The use of a proxy detected.
+apt-config dump | grep -i Acquire::HTTP::Proxy \
+    > ${prefix}/etc/apt/apt.conf.d/proxy-guess
+
+
 #
-#  Process any of the present apt-conf setup lines.
+# Setup the sources.list file for new installations of Ubuntu GNU/Linux.
 #
-for i in /etc/apt/apt.conf $(run-parts --list /etc/apt/apt.conf.d) ; do
-
-
-    #
-    # If the file exists.  (Need this in case the literal glob fails.)
-    #
-    if [ -e $i ] ; then
-
-        #
-        # Save the matching line(s) to the proxy guess file.
-        #
-        logMessage The use of a proxy detected.
-
-        grep -v '^//' $i | grep -i HTTP::Proxy >>${prefix}/etc/apt/apt.conf.d/proxy-guess
-    fi
-done
-
-
-
 cat <<E_O_APT > ${prefix}/etc/apt/sources.list
 #
 #  /etc/apt/sources.list

hooks/intrepid/30-disable-gettys

@@ -27,10 +27,12 @@ logMessage Script $0 starting
 #
 #  Remove the links for upstart
 #
-rm ${prefix}/etc/event.d/tty[!1]
-sed -i -e s/tty1/hvc0/ ${prefix}/etc/event.d/tty1
-mv ${prefix}/etc/event.d/tty1 ${prefix}/etc/event.d/hvc0
-[ -f ${prefix}/etc/inittab ] && sed -i -e s/tty1/hvc0/ ${prefix}/etc/inittab
+rm -f ${prefix}/etc/event.d/tty[!1]
+[ -f ${prefix}/etc/event.d/tty1 ] && {
+    sed -i -e s/tty1/hvc0/ ${prefix}/etc/event.d/tty1
+    mv ${prefix}/etc/event.d/tty1 ${prefix}/etc/event.d/hvc0
+}
+[ -f ${prefix}/etc/inittab ] && sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' -e 's/tty1$/hvc0/' ${prefix}/etc/inittab
 
 #
 #  Are we using an alternative serial device?

hooks/intrepid/40-setup-networking

@@ -121,6 +121,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/intrepid/50-setup-hostname

@@ -27,37 +27,47 @@ fi
 #
 logMessage Script $0 starting
 
+#
+#  Determine the FQDN and Hostname
+#
+GUEST_FQDN=${hostname}
+GUEST_HOSTNAME=`echo $GUEST_FQDN | awk -F'.' '{print $1}'`
 
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} | sed 's/^\([^\.]*\)\..*/\1/' > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
+echo $GUEST_HOSTNAME > ${prefix}/etc/hostname
+echo $GUEST_FQDN > ${prefix}/etc/mailname
 
 
 #
 #  Fixup the /etc/hosts file upon the new image for
 # machines with static IPs
 #
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-    echo "${ip1}    ${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
+if [ -z "${copyhosts}" ]; then
     #
-    #  Stub /etc/hosts for DHCP clients.
+    #  Copy localhost
     #
+    cat > ${prefix}/etc/hosts <<EOF
+127.0.0.1    localhost
+EOF
+    #
+    #  Make sure our hostname and FQDN is resolvable
+    #
+    if [ -z "${dhcp}" ]; then
+        #
+        #  If dhcp is diabled, FQDN should resolve to our IP
+        #
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    else
+        cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    fi
+
     cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1       localhost
 
 # The following lines are desirable for IPv6 capable hosts
 ::1     ip6-localhost ip6-loopback
@@ -69,7 +79,25 @@ ff02::3 ip6-allhosts
 
 EOF
 
+else
+    # Non-IPv6 stuff.
+    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
 
+    # New entry.
+    if [ -z "${dhcp}" ]; then
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    else
+    cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    fi
+
+    # IPv6 stuff.
+    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
 fi
 
 
@@ -78,20 +106,15 @@ fi
 #
 if [ -z "${dhcp}" ]; then
 
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
+    if ( grep $GUEST_FQDN /etc/hosts > /dev/null ) ; then
 
-        logMessage Host already has IP address for the host ${hostname}.
+        logMessage Host already has IP address for the host $GUEST_FQDN.
 
     else
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
-
         if [ -z "${nohosts}" ]; then
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
+            logMessage Adding $GUEST_FQDN and $GUEST_HOSTNAME to /etc/hosts on the host
+            echo "${ip1}    $GUEST_FQDN $GUEST_HOSTNAME" >> /etc/hosts
 
             #
             #  If we've updated the /etc/hosts file on the host machine

hooks/intrepid/60-copy-host-files

@@ -30,28 +30,6 @@ logMessage Script $0 starting
 cp /etc/timezone    ${prefix}/etc
 cp /etc/localtime   ${prefix}/etc
 
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
-
 
 #
 #  Log our finish

hooks/intrepid/70-install-ssh

@@ -1,18 +1,17 @@
 #!/bin/sh
 #
-#  This script installs OpenSSH upon the new system.
+#  This script installs OpenSSH Server on the newly created guest.
 #
-#  It must make sure that the server is not running before it exits 
-# otherwise the temporary mounted directory will not be unmountable.
+#  It does this by generating the keys within the host, since guests
+# do not have the necessary /dev/random and /dev/urandom to generate
+# their own keys before boot.
 #
-# Steve
+# Dmitry Nedospasov
 # --
-# http://www.steve.org.uk/
-
+# http://nedos.net/
 
 prefix=$1
 
-
 #
 #  Source our common functions
 #
@@ -22,21 +21,43 @@ else
     . ./hooks/common.sh
 fi
 
-
 #
 # Log our start
 #
 logMessage Script $0 starting
 
+#
+#  Since our guests doesn't have an RNG, generate the keys from the host
+#
+#  First, create an ssh directory
+#
+mkdir -p ${prefix}/etc/ssh
+
+#
+#  Second, Generate the Host RSA Key
+#
+if ssh-keygen -t rsa -N "" -f ${prefix}/etc/ssh/ssh_host_rsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host RSA"
+else
+    logMessage "failed to generate Host RSA Key"
+fi
+
+#
+#  Third, Generate the Host DSA Key
+#
+if ssh-keygen -t dsa -N "" -f ${prefix}/etc/ssh/ssh_host_dsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host DSA"
+else
+    logMessage "failed to generate Host DSA Key"
+fi
 
 #
 #  Install ssh
 #
-installDebianPackage ${prefix} ssh
-
-
+installDebianPackage ${prefix} openssh-server
 
 #
-#  Log our finish
+# Log our finish
 #
 logMessage Script $0 finished
+

hooks/intrepid/80-install-kernel

@@ -38,14 +38,14 @@ KERNEL_PKG="linux-image-server"
 logMessage Attempting to install the $KERNEL_PKG kernel image
 logMessage WARNING: This kernel may not have pvops
 if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_PKG > /dev/null 2>&1; then
-	logMessage Package $KERNEL_PKG is available - installing
+    logMessage Package $KERNEL_PKG is available - installing
     installDebianPackage ${prefix} initramfs-tools
     installDebianPackage ${prefix} $KERNEL_PKG
 else
-	logMessage Package $KERNEL_PKG is not available
-	logMessage pygrub set, but kernel could not be installed
-	logMessage Script $0 failed
-	exit 1
+    logMessage Package $KERNEL_PKG is not available
+    logMessage pygrub set, but kernel could not be installed
+    logMessage Script $0 failed
+    exit 1
 fi
 
 DOMU_KERNEL=$(basename $(ls -1 ${prefix}/boot/vmlinuz* | tail -n 1))
@@ -58,10 +58,10 @@ DOMU_ISSUE=$(sed -re "s/ *\\\.*//g" -e1q < ${prefix}/etc/issue)
 #
 
 if [ -f ${prefix}/boot/$DOMU_RAMDISK ]; then
-	logMessage initrd exists, skipping generation
+    logMessage initrd exists, skipping generation
 else
-	logMessage initrd missing, generating
-	chroot ${prefix} update-initramfs -c -k $KERNEL_REV
+    logMessage initrd missing, generating
+    chroot ${prefix} update-initramfs -c -k $KERNEL_REV
 fi
 
 #

hooks/intrepid/90-make-fstab

@@ -60,6 +60,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -85,6 +86,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
 
     if [ "${partdata2}" = "swap" ]; then
@@ -105,6 +109,9 @@ fi
 if [ $has_reiserfs -eq 1 ]; then
     installDebianPackage ${prefix} reiserfsprogs
 fi
+if [ $has_btrfs -eq 1 ]; then
+    installDebianPackage ${prefix} btrfs-tools
+fi
 
 
 #

hooks/karmic/20-setup-apt

@@ -28,38 +28,19 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  You will probably need DNS to run "apt-get update"
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Attempt to auto-magically detect the use of a Proxy for apt-get, and
-# replicate that setup in our new guest.
+# replicate that setup in our new guest via apt-config dump and save
+# the setting to the proxy guess file.
 #
+logMessage The use of a proxy detected.
+apt-config dump | grep -i Acquire::HTTP::Proxy \
+    > ${prefix}/etc/apt/apt.conf.d/proxy-guess
+
+
 #
-#  Process any of the present apt-conf setup lines.
+# Setup the sources.list file for new installations of Ubuntu GNU/Linux.
 #
-for i in /etc/apt/apt.conf $(run-parts --list /etc/apt/apt.conf.d) ; do
-
-
-    #
-    # If the file exists.  (Need this in case the literal glob fails.)
-    #
-    if [ -e $i ] ; then
-
-        #
-        # Save the matching line(s) to the proxy guess file.
-        #
-        logMessage The use of a proxy detected.
-
-        grep -v '^//' $i | grep -i HTTP::Proxy >>${prefix}/etc/apt/apt.conf.d/proxy-guess
-    fi
-done
-
-
-
 cat <<E_O_APT > ${prefix}/etc/apt/sources.list
 #
 #  /etc/apt/sources.list

hooks/karmic/30-disable-gettys

@@ -27,10 +27,12 @@ logMessage Script $0 starting
 #
 #  Remove the links for upstart
 #
-rm ${prefix}/etc/init/tty[!1].conf
-sed -i -e s/tty1/hvc0/ ${prefix}/etc/init/tty1.conf
-mv ${prefix}/etc/init/tty1.conf  ${prefix}/etc/init/hvc0.conf
-
+rm -f ${prefix}/etc/init/tty[!1].conf
+[ -f ${prefix}/etc/init/tty1.conf ] && {
+    sed -i -e s/tty1/hvc0/ ${prefix}/etc/init/tty1.conf
+    mv ${prefix}/etc/init/tty1.conf  ${prefix}/etc/init/hvc0.conf
+}
+[ -f ${prefix}/etc/inittab ] && sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' -e 's/tty1$/hvc0/' ${prefix}/etc/inittab
 
 #
 #  Are we using an alternative serial device?

hooks/karmic/40-setup-networking

@@ -121,6 +121,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/karmic/50-setup-hostname

@@ -27,37 +27,47 @@ fi
 #
 logMessage Script $0 starting
 
+#
+#  Determine the FQDN and Hostname
+#
+GUEST_FQDN=${hostname}
+GUEST_HOSTNAME=`echo $GUEST_FQDN | awk -F'.' '{print $1}'`
 
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} | sed 's/^\([^\.]*\)\..*/\1/' > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
+echo $GUEST_HOSTNAME > ${prefix}/etc/hostname
+echo $GUEST_FQDN > ${prefix}/etc/mailname
 
 
 #
 #  Fixup the /etc/hosts file upon the new image for
 # machines with static IPs
 #
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-    echo "${ip1}    ${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
+if [ -z "${copyhosts}" ]; then
     #
-    #  Stub /etc/hosts for DHCP clients.
+    #  Copy localhost
     #
+    cat > ${prefix}/etc/hosts <<EOF
+127.0.0.1    localhost
+EOF
+    #
+    #  Make sure our hostname and FQDN is resolvable
+    #
+    if [ -z "${dhcp}" ]; then
+        #
+        #  If dhcp is diabled, FQDN should resolve to our IP
+        #
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    else
+        cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    fi
+
     cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1       localhost
 
 # The following lines are desirable for IPv6 capable hosts
 ::1     ip6-localhost ip6-loopback
@@ -69,7 +79,25 @@ ff02::3 ip6-allhosts
 
 EOF
 
+else
+    # Non-IPv6 stuff.
+    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
 
+    # New entry.
+    if [ -z "${dhcp}" ]; then
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    else
+    cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    fi
+
+    # IPv6 stuff.
+    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
 fi
 
 
@@ -78,20 +106,15 @@ fi
 #
 if [ -z "${dhcp}" ]; then
 
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
+    if ( grep $GUEST_FQDN /etc/hosts > /dev/null ) ; then
 
-        logMessage Host already has IP address for the host ${hostname}.
+        logMessage Host already has IP address for the host $GUEST_FQDN.
 
     else
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
-
         if [ -z "${nohosts}" ]; then
 
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
+            logMessage Adding $GUEST_FQDN and $GUEST_HOSTNAME to /etc/hosts on the host
+            echo "${ip1}    $GUEST_FQDN $GUEST_HOSTNAME" >> /etc/hosts
 
             #
             #  If we've updated the /etc/hosts file on the host machine

hooks/karmic/60-copy-host-files

@@ -30,28 +30,6 @@ logMessage Script $0 starting
 cp /etc/timezone    ${prefix}/etc
 cp /etc/localtime   ${prefix}/etc
 
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
-
 
 #
 #  Log our finish

hooks/karmic/70-install-ssh

@@ -1,18 +1,17 @@
 #!/bin/sh
 #
-#  This script installs OpenSSH upon the new system.
+#  This script installs OpenSSH Server on the newly created guest.
 #
-#  It must make sure that the server is not running before it exits 
-# otherwise the temporary mounted directory will not be unmountable.
+#  It does this by generating the keys within the host, since guests
+# do not have the necessary /dev/random and /dev/urandom to generate
+# their own keys before boot.
 #
-# Steve
+# Dmitry Nedospasov
 # --
-# http://www.steve.org.uk/
-
+# http://nedos.net/
 
 prefix=$1
 
-
 #
 #  Source our common functions
 #
@@ -22,21 +21,43 @@ else
     . ./hooks/common.sh
 fi
 
-
 #
 # Log our start
 #
 logMessage Script $0 starting
 
+#
+#  Since our guests doesn't have an RNG, generate the keys from the host
+#
+#  First, create an ssh directory
+#
+mkdir -p ${prefix}/etc/ssh
+
+#
+#  Second, Generate the Host RSA Key
+#
+if ssh-keygen -t rsa -N "" -f ${prefix}/etc/ssh/ssh_host_rsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host RSA"
+else
+    logMessage "failed to generate Host RSA Key"
+fi
+
+#
+#  Third, Generate the Host DSA Key
+#
+if ssh-keygen -t dsa -N "" -f ${prefix}/etc/ssh/ssh_host_dsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host DSA"
+else
+    logMessage "failed to generate Host DSA Key"
+fi
 
 #
 #  Install ssh
 #
-installDebianPackage ${prefix} ssh
-
-
+installDebianPackage ${prefix} openssh-server
 
 #
-#  Log our finish
+# Log our finish
 #
 logMessage Script $0 finished
+

hooks/karmic/90-make-fstab

@@ -60,6 +60,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -85,6 +86,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
 
     if [ "${partdata2}" = "swap" ]; then
@@ -105,6 +109,9 @@ fi
 if [ $has_reiserfs -eq 1 ]; then
     installDebianPackage ${prefix} reiserfsprogs
 fi
+if [ $has_btrfs -eq 1 ]; then
+    installDebianPackage ${prefix} btrfs-tools
+fi
 
 
 #

lib/Xen/Tools.pm

@@ -319,10 +319,6 @@ L<http://search.cpan.org/dist/Xen-Tools>
 
 =back
 
-
-=head1 ACKNOWLEDGEMENTS
-
-
 =head1 COPYRIGHT & LICENSE
 
 Copyright 2007 C.J. Adams-Collier, all rights reserved.

lib/Xen/Tools/Log.pm

@@ -149,7 +149,7 @@ sub _init_fh {
   my $logFile =
     File::Spec->catfile( $self->logpath(), $self->hostname() . '.log' );
 
-  system( 'mkdir -p', $self->logpath() ) unless -d $self->logpath();
+  system( qw(mkdir -p), $self->logpath() ) unless -d $self->logpath();
 
   carp "Couldn't create log directory: $!" unless $? == 0;
   
@@ -199,10 +199,6 @@ L<http://search.cpan.org/dist/Xen-Tools>
 
 =back
 
-
-=head1 ACKNOWLEDGEMENTS
-
-
 =head1 COPYRIGHT & LICENSE
 
 Copyright 2007 C.J. Adams-Collier, all rights reserved.

misc/xen-tools

@@ -2,7 +2,7 @@
 #
 #  /etc/bash_completion.d/xen-tools
 #
-# Completion functions for Bash.  
+# Completion functions for Bash.
 #
 # This file offers basic support for all the command line options, along with
 # some specialist support to complete filesystem types, distribution targets,
@@ -55,8 +55,8 @@ _xen_create_image()
 
     # Determine arguments dynamically.  Avoids out-of-dateness.
     opts=$(xen-create-image --help|grep -- --|awk '{print $1}' |grep -- -- | sort -u)
-    
-    
+
+
     #
     # Complete the initial part of the IP in the configuration file.
     ip=`grep ^gateway /etc/xen-tools/xen-tools.conf 2>/dev/null | awk -F'= '  '{print $2}'`
@@ -78,71 +78,127 @@ _xen_create_image()
 
     #
     # EVMS container completion
-    #    
+    #
     evmscontainers=`evms_query containers 2>/dev/null`
 
     case "$prev" in
-	--cache)
-	    COMPREPLY=( $( compgen -W 'yes no'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--config)
-	    _filedir 
-	    return 0
-	    ;;
-	--dir)
-	    _filedir -d
-	    return 0
-	    ;;
-	--dist)
-	    COMPREPLY=( $( compgen -W '${dists}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--evms)
-	    COMPREPLY=( $( compgen -W '${evmscontainers}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--fs)
-	    COMPREPLY=( $( compgen -W 'xfs ext3 reiserfs'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--hooks)
-	    COMPREPLY=( $( compgen -W '0 1'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--install)
-	    COMPREPLY=( $( compgen -W '0 1'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--image)
-	    COMPREPLY=( $( compgen -W 'sparse full'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--install-method)
-	    COMPREPLY=( $( compgen -W 'copy debootstrap rinse rpmstrap tar'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--ip)
-	    ip=`echo ${ip} | sed -e 's/[.][^.]*$/./'`
-	    COMPREPLY=( $(compgen -W "${ip}" -- ${cur}) )
-	    return 0
-	    ;;
-	--lvm)
-	    COMPREPLY=( $( compgen -W '${vgs}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--role)
+        --cache)
+            COMPREPLY=( $( compgen -W 'yes no'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --cachedir)
+            _filedir -d
+            return 0
+            ;;
+        --config)
+            _filedir .conf
+            return 0
+            ;;
+        --debootstrap-cmd)
+            _filedir
+            return 0
+            ;;
+        --dir)
+            _filedir -d
+            return 0
+            ;;
+        --dist)
+            COMPREPLY=( $( compgen -W '${dists}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --evms)
+            COMPREPLY=( $( compgen -W '${evmscontainers}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --fs)
+            COMPREPLY=( $( compgen -W 'ext2 ext3 ext4 xfs reiserfs btrfs'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --genpass)
+            COMPREPLY=( $( compgen -W '0 1'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --hash_method)
+            COMPREPLY=( $( compgen -W 'md5 sha256 sha512'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --hooks)
+            COMPREPLY=( $( compgen -W '0 1'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --install)
+            COMPREPLY=( $( compgen -W '0 1'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --image)
+            COMPREPLY=( $( compgen -W 'sparse full'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --image-dev)
+            _filedir
+            return 0
+            ;;
+        --initrd)
+            _filedir
+            return 0
+            ;;
+        --initrd)
+            COMPREPLY=( $( compgen -W '0 1'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --install-method)
+            COMPREPLY=( $( compgen -W 'copy debootstrap rinse rpmstrap tar'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --install-source)
+            _filedir
+            return 0
+            ;;
+        --ip)
+            ip=`echo ${ip} | sed -e 's/[.][^.]*$/./'`
+            COMPREPLY=( $(compgen -W "${ip}" -- ${cur}) )
+            return 0
+            ;;
+        --kernel)
+            _filedir
+            return 0
+            ;;
+        --lvm)
+            COMPREPLY=( $( compgen -W '${vgs}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --modules)
+            _filedir -d
+            return 0
+            ;;
+        --output)
+            _filedir -d
+            return 0
+            ;;
+        --partitions)
+            partitions=$(for x in `/bin/ls -1 /etc/xen-tools/partitions.d/ 2>/dev/null | grep -v \/ 2>/dev/null`; do echo ${x} ; done )
+            COMPREPLY=( $( compgen -W '${partitions}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --role)
             roles=$(ls -1 /etc/xen-tools/role.d/ | xargs echo )
-	    COMPREPLY=( $( compgen -W '${roles}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--partitions)
-	    partitions=$(for x in `/bin/ls -1 /etc/xen-tools/partitions.d/ 2>/dev/null | grep -v \/ 2>/dev/null`; do echo ${x} ; done )
-	    COMPREPLY=( $( compgen -W '${partitions}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
+            COMPREPLY=( $( compgen -W '${roles}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --roledir)
+            _filedir -d
+            return 0
+            ;;
+        --swap-dev)
+            _filedir
+            return 0
+            ;;
+        --template)
+            _filedir
+            return 0
+            ;;
     esac
-    
+
     if [[ ${cur} == -* ]] || [[ ${prev} == xen-create-image ]]; then
         COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
         return 0
@@ -167,14 +223,14 @@ _xen_create_nfs()
     # Determine arguments dynamically.  Avoids out-of-dateness.
     opts=$(xen-create-nfs --help|grep -- --|awk '{print $1}' |grep -- -- | sort -u)
 
-    
+
     case "$prev" in
-	--template)
-	    _filedir 
-	    return 0
-	    ;;
+        --template)
+            _filedir
+            return 0
+            ;;
     esac
-    
+
     if [[ ${cur} == -* ]]; then
         COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
         return 0
@@ -187,7 +243,7 @@ complete -F _xen_create_nfs xen-create-nfs
 #
 #  Completion for xen-delete-image
 #
-_xen_delete_image() 
+_xen_delete_image()
 {
     local cur prev opts vgs names
     COMPREPLY=()
@@ -201,7 +257,7 @@ _xen_delete_image()
 
     #
     # EVMS container completion
-    #    
+    #
     evmscontainers=`evms_query containers 2>/dev/null`
 
     #
@@ -213,22 +269,22 @@ _xen_delete_image()
 
     case "${prev}" in
         --dir)
-	    _filedir -d
-	    return 0
+            _filedir -d
+            return 0
+            ;;
+        --evms)
+            COMPREPLY=( $( compgen -W '${evmscontainers}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
             ;;
-	--evms)
-	    COMPREPLY=( $( compgen -W '${evmscontainers}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
         --hostname)
             names=`_find_xen_images`
             COMPREPLY=( $(compgen -W "${names}" -- ${cur}) )
-	    return 0
+            return 0
+            ;;
+        --lvm)
+            COMPREPLY=( $( compgen -W '${vgs}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
             ;;
-	--lvm)
-	    COMPREPLY=( $( compgen -W '${vgs}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
     esac
 
     if [[ ${cur} == -* ]]; then
@@ -249,7 +305,7 @@ complete -F _xen_delete_image xen-delete-image
 #
 #  Completion for xen-update-image
 #
-_xen_update_image() 
+_xen_update_image()
 {
     local cur prev opts base names vgs
     COMPREPLY=()
@@ -271,17 +327,17 @@ _xen_update_image()
 
     case "${prev}" in
         --dir)
-	    _filedir -d
-	    return 0
+            _filedir -d
+            return 0
+            ;;
+        --evms)
+            COMPREPLY=( $( compgen -W '${evmscontainers}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --lvm)
+            COMPREPLY=( $( compgen -W '${vgs}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
             ;;
-	--evms)
-	    COMPREPLY=( $( compgen -W '${evmscontainers}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--lvm)
-	    COMPREPLY=( $( compgen -W '${vgs}'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
     esac
 
     if [[ ${cur} == -* ]]; then
@@ -301,7 +357,7 @@ complete -F _xen_update_image xen-update-image
 #
 #  Completion for xen-list-images
 #
-_xen_list_images() 
+_xen_list_images()
 {
     local cur prev opts vgs
     COMPREPLY=()
@@ -333,19 +389,19 @@ _xt-create-xen-config()
 
     # Determine arguments dynamically.  Avoids out-of-dateness.
     opts=$(xt-create-xen-config  --help|grep -- --|awk '{print $1}'|grep -- -- | sort -u)
-    
-    
+
+
     case "$prev" in
-	--output)
-	    _filedir -d
-	    return 0
-	    ;;
-	--template)
-	    COMPREPLY=( $( compgen -f -- ${cur#*:} ) )
-	    return 0
-	    ;;
+        --output)
+            _filedir -d
+            return 0
+            ;;
+        --template)
+            COMPREPLY=( $( compgen -f -- ${cur#*:} ) )
+            return 0
+            ;;
     esac
-    
+
     if [[ ${cur} == -* ]]; then
         COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
         return 0
@@ -368,25 +424,25 @@ _xt-customize-image()
 
     # Determine arguments dynamically.  Avoids out-of-dateness.
     opts=$(xt-customize-image  --help|grep -- --|awk '{print $1}'|grep -- -- | sort -u)
-    
+
     #
     # Available distributions, from rpmstrap
     #
     if [ -d /usr/lib/rpmstrap/scripts ]; then
        dists=`/bin/ls -1 /usr/lib/rpmstrap/scripts`
     fi
-    
+
     case "$prev" in
-	--dist)
-	    COMPREPLY=( $( compgen -W '${dists} sid sarge etch lenny'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--location)
-	    _filedir -d
-	    return 0
-	    ;;
+        --dist)
+            COMPREPLY=( $( compgen -W '${dists} sid sarge etch lenny'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --location)
+            _filedir -d
+            return 0
+            ;;
     esac
-    
+
     if [[ ${cur} == -* ]]; then
         COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
         return 0
@@ -410,7 +466,7 @@ _xt-install-image()
     # Determine arguments dynamically.  Avoids out-of-dateness.
     opts=$(xt-install-image  --help|grep -- --|awk '{print $1}'|grep -- -- | sort -u)
 
-   
+
     #
     # Available distributions, from rpmstrap
     #
@@ -420,28 +476,28 @@ _xt-install-image()
 
 
     case "$prev" in
-	--cache)
-	    COMPREPLY=( $( compgen -W 'yes no'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--config)
-	    _filedir 
-	    return 0
-	    ;;
-	--dist)
-	    COMPREPLY=( $( compgen -W '${dists} sid sarge etch lenny'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--install-method)
-	    COMPREPLY=( $( compgen -W 'copy debootstrap rinse rpmstrap tar'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
-	    return 0
-	    ;;
-	--location)
-	    _filedir -d
-	    return 0
-	    ;;
+        --cache)
+            COMPREPLY=( $( compgen -W 'yes no'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --config)
+            _filedir
+            return 0
+            ;;
+        --dist)
+            COMPREPLY=( $( compgen -W '${dists} sid sarge etch lenny'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --install-method)
+            COMPREPLY=( $( compgen -W 'copy debootstrap rinse rpmstrap tar'  -- "${COMP_WORDS[COMP_CWORD]}" ) )
+            return 0
+            ;;
+        --location)
+            _filedir -d
+            return 0
+            ;;
     esac
-    
+
     if [[ ${cur} == -* ]]; then
         COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
         return 0

roles/passwd

@@ -1,186 +0,0 @@
-#!/usr/bin/perl -w
-
-=head1 NAME
-
-passwd - xen-tools role-script to setup root password for new guests.
-
-=head1 AUTHOR
-
- Steve
- --
- http://www.steve.org.uk/
-
-=cut
-
-
-
-use strict;
-use warnings;
-use Digest::MD5;
-use Expect;
-
-
-
-#
-#  Get the arguments our role script was passed.
-#
-my( $prefix, $passwd ) = ( @ARGV );
-
-#
-#  Make sure they are valid.
-#
-if ( ! -d $prefix )
-{
-    print "Prefix not found: $prefix\n";
-    exit;
-}
-
-if ( ! length( $passwd ) )
-{
-    print "Password missing.\n";
-    exit;
-}
-
-
-#
-#  Now make sure we have the module we require.
-#
-eval "use Expect;";
-if ( $@ )
-{
-    print "Expect.pm not found.  Aborting.\n";
-    print "(For Debian systems run:\n\tapt-get install libexpect-perl\n";
-    exit;
-}
-
-
-#
-#  OK now we're good to go:  Continue until it succeeds.
-#
-my $count = 0;
-while( $count < 10 )
-{
-    changePassword( $prefix, $passwd );
-    $count += 1;
-}
-
-print "Failed to setup root password\n";
-print "-----------------------------\n";
-
-
-
-#
-#  Don't look at this code.
-#
-#  OK.  Expect sometimes fails.  It sucks.
-#
-#  So how do we know if a password change operation fails?  We take
-# an MD5(/etc/passwd + /etc/shadow) and if they don't change we've
-# failed.
-#
-#  Upon success we will simply exit();
-#
-#
-sub changePassword
-{
-    my ( $prefix, $passwd ) = ( @_ );
-
-    #
-    # Find current checksum.
-    #
-    my $orig = checksum( $prefix );
-
-    #
-    #  Create the expect object.
-    #
-    my $exp = Expect->spawn( "/usr/sbin/chroot",
-                             $prefix,
-                             "/usr/bin/passwd",
-                             "root" )
-      or die "Cannot spawn the password under chroot: $!\n";
-
-    # prompt
-    unless ($exp->expect(5,"Enter new"))
-    {
-        print "Failed 1st prompt\n";
-        $exp->hard_close();
-        return;
-    }
-
-    # send + wait.
-    $exp->send( $passwd . "\n" );
-    sleep( 1 );
-
-    # confirm
-    unless ($exp->expect(5,"Retype new"))
-    {
-        print "Failed 2nd prompt\n";
-        $exp->hard_close();
-        return;
-    }
-
-    # send.
-    $exp->send( $passwd . "\n" );
-
-
-    #  Closeup.
-    $exp->soft_close();
-
-    #
-    #  Did it work?
-    #
-    my $updated = checksum( $prefix );
-
-    if ( $updated ne $orig )
-    {
-        print "Password setup correctly.\n";
-        exit;
-    }
-    else
-    {
-        print "Setting password failed.\n";
-    }
-}
-
-
-
-#
-#  Checksum /etc/passwd + /etc/shadow if they exist in the
-# given chroot()
-#
-sub checksum
-{
-    my( $prefix ) = ( @_ );
-
-    my $sum = '';
-
-    foreach my $file ( qw! /etc/passwd /etc/shadow ! )
-    {
-        if ( -e $prefix . "/" . $file )
-        {
-            #
-            #  Open the file.
-            #
-            open(FILE, $prefix . "/" . $file) 
-              or die "Can¡Çt open ¡Ç$prefix/$file¡Ç: $!";
-            binmode(FILE);
-
-            #
-            #  Add the data
-            #
-            my $md5 = Digest::MD5->new;
-            while (<FILE>)
-            {
-                $md5->add($_);
-            }
-            close(FILE);
-
-            #
-            #  Update the sum
-            #
-            $sum .= $md5->b64digest;
-        }
-    }
-
-    return $sum;
-}

roles/resolv

@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+#  This role helps to customize guest's /etc/resolv.conf
+#
+
+prefix=$1
+
+#
+#  Source our common functions - this will let us install a Debian package.
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    echo "Installation problem"
+fi
+
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+# WARNING :
+#
+# resolv.conf is backed up as resolv.conf.old during roles execution to
+# permit the chrooted guest to be able to resolve during installation.
+# Use resolv.conf.old name during hooks, it will be correctly renamed
+# after hooks execution
+#
+
+#
+# Create Guest's resolv.conf as resolv.conf.old (see WARNING before) :
+#
+cat <<RESOLV_CONF_EOF >${prefix}/etc/resolv.conf.old
+nameserver 192.168.1.1
+#search domain.tld
+RESOLV_CONF_EOF
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished

roles/sudoers

@@ -0,0 +1,46 @@
+#!/bin/sh
+#
+#  This role installs sudo with host sudoers file.
+#
+
+prefix=$1
+
+#
+#  Source our common functions - this will let us install a Debian package.
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    echo "Installation problem"
+fi
+
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+# Install sudo package
+#
+installDebianPackage ${prefix} sudo
+
+#
+# WARNING :
+#
+# Copying this file means that root users in guest will KNOW who is
+# root on host.
+#
+
+#
+# Copy dom0's file to domU.
+#
+cp /etc/sudoers ${prefix}/etc/
+chown root:root ${prefix}/etc/sudoers
+chmod 440 ${prefix}/etc/sudoers
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished

t/.gitignore

@@ -0,0 +1,2 @@
+# Automatically generated by modules.sh
+/modules.t

t/Makefile

@@ -6,11 +6,8 @@ verbose:
 	@cd ..; prove --shuffle --verbose t/
 
 
-modules: .PHONY
+modules: modules.sh
 	./modules.sh > modules.t
 
-.PHONY:
-	true
-
 clean:
 	-rm *~

t/argument-check.t

@@ -45,9 +45,8 @@ foreach my $key ( sort keys %OPTIONS )
         }
     }
 
-    next if ( $key =~ /mirror_/i );
-    next if ( $key =~ /_options/i );
-    next if ( $key =~ /(serial_device|disk_device)/i );
+    next if ( $key =~ /^mirror_/ );
+    next if ( $key =~ /_options$/ );
 
     is( $found, 1 , " Found documentation for '$key'" );
 }

t/getopt.t

@@ -59,7 +59,7 @@ sub testFile
     #
     #  Test we discovered some documented options.
     #
-    ok( $#documented > 1, "We found some options documented." );
+    ok( $#documented > 1, "We found some options documented in $file." );
 
 
 
@@ -105,11 +105,11 @@ sub testFile
 #print " - strip comments : $o ";
 
             #
-            #  Remove "" from around it.
+            #  Remove "" or '' around it.
             #
-            if ( $o =~ /"([^"]+)"/ )
+            if ( $o =~ /(["'])([^"']+)\1/ )
             {
-                $o = $1;
+                $o = $2;
             }
 #print " - remove quotes : $o ";
             #
@@ -125,13 +125,18 @@ sub testFile
             #
             next if ( $o =~ /^[ \t]*$/ );
 
+            #
+            #  Now split at pipe
+            #
+            foreach my $osplit (split(/\|/, $o)) {
 
-            #
-            #  Phew.  Now we're done.
-            #
-            #  This option '$o' is something we call GetOptions with.
-            #
-            $accepted{$o} = 1;
+                #
+                #  Phew.  Now we're done.
+                #
+                #  This option '$osplit' is something we call GetOptions with.
+                #
+                $accepted{$osplit} = 1;
+            }
         }
     }
 

t/gitignore.t

@@ -0,0 +1,45 @@
+#!/usr/bin/perl -w
+#
+#  Test that .gitignore is coherent
+#
+# Stéphane (kwisatz) Jourdois
+# --
+#
+
+use strict;
+use Test::More tests => 3;
+
+BEGIN { use_ok( 'Git' ); }
+
+
+# First, check that no tracked files are ignored
+my $cmd = Git::command_output_pipe('ls-files', '--ignored', '--exclude-standard');
+my $output;
+while (<$cmd>) { $output .= "--> $_" }
+close $cmd;
+
+ok(!defined $output, 'No tracked file is ignored')
+    or diag(<<EOF
+
+Check that the following tracked files _have_to_ be ignored, and then either :
+    - 'git rm' them
+    - modify .gitignore to not ignore them
+EOF
+    . $output . "\n");
+
+
+# Now, check that no untracked files are present
+$cmd = Git::command_output_pipe('ls-files', '--others', '--exclude-standard');
+undef $output;
+while (<$cmd>) { $output .= "--> $_" }
+close $cmd;
+
+ok(!defined $output, 'No untracked file is present')
+    or diag(<<EOF
+
+Check whether the following untracked files have to be ignored or
+tracked, and either :
+    - 'git add' them
+    - modify .gitignore to ignore them
+EOF
+    . $output . "\n");

t/hook-inittab.t

@@ -94,7 +94,7 @@ sub testHook
             #  1:2345:respawn:/sbin/getty 38400 console
             #
             ok( $1 eq "1", "We found the first getty line." );
-            ok( $3 eq "tty1", "Which does uses the correct driver: $3" );
+            ok( $3 eq "hvc0", "Which does uses the correct driver: $3" );
         }
 
         if ( $line =~ /^(.).*getty/ )

t/modules.sh

@@ -25,10 +25,11 @@ use Test::More qw( no_plan );
 EOF
 
 
-for i in `rgrep '^use ' .. | grep -v Expect | grep -v POSIX | grep -v Xen:: | grep -v Moose | awk '{print $2}' | tr -d 
+for i in `grep '^use ' -r .. | grep -v Expect | grep -v POSIX | grep -v Xen:: | grep -v Moose | awk '{print $2}' | tr -d 
 \;\(\) | sort | uniq`; \
     do \
      echo "BEGIN{ use_ok( '$i' ); }"; \
      echo "require_ok( '$i' );" ; \
      printf '\n' ; \
 done
+

t/modules.t

@@ -1,80 +0,0 @@
-#!/usr/bin/perl -w -I..
-#
-#  Test that all the Perl modules we require are available.
-#
-#  This list is automatically generated by modules.sh
-#
-# Steve
-# --
-#
-
-use Test::More qw( no_plan );
-
-BEGIN{ use_ok( 'Carp' ); }
-require_ok( 'Carp' );
-
-
-BEGIN{ use_ok( 'Config' ); }
-require_ok( 'Config' );
-
-
-BEGIN{ use_ok( 'Digest::MD5' ); }
-require_ok( 'Digest::MD5' );
-
-
-BEGIN{ use_ok( 'English' ); }
-require_ok( 'English' );
-
-
-BEGIN{ use_ok( 'Env' ); }
-require_ok( 'Env' );
-
-
-BEGIN{ use_ok( 'File::Copy' ); }
-require_ok( 'File::Copy' );
-
-
-BEGIN{ use_ok( 'File::Find' ); }
-require_ok( 'File::Find' );
-
-
-BEGIN{ use_ok( 'File::Path' ); }
-require_ok( 'File::Path' );
-
-
-BEGIN{ use_ok( 'File::Slurp' ); }
-require_ok( 'File::Slurp' );
-
-
-BEGIN{ use_ok( 'File::Spec' ); }
-require_ok( 'File::Spec' );
-
-
-BEGIN{ use_ok( 'File::Temp' ); }
-require_ok( 'File::Temp' );
-
-
-BEGIN{ use_ok( 'Getopt::Long' ); }
-require_ok( 'Getopt::Long' );
-
-
-BEGIN{ use_ok( 'Pod::Usage' ); }
-require_ok( 'Pod::Usage' );
-
-
-BEGIN{ use_ok( 'strict' ); }
-require_ok( 'strict' );
-
-
-BEGIN{ use_ok( 'Test::More' ); }
-require_ok( 'Test::More' );
-
-
-BEGIN{ use_ok( 'Text::Template' ); }
-require_ok( 'Text::Template' );
-
-
-BEGIN{ use_ok( 'warnings' ); }
-require_ok( 'warnings' );
-
-

t/no-tabs.t

@@ -38,9 +38,15 @@ sub checkFile
     # Nor about Makefiles
     return if ( $file =~ /\/Makefile$/ );
 
+    # Nor about dot files
+    return if ( $file =~ m{/\.[^/]+$} );
+
     # Nor about files which start with ./debian/
     return if ( $file =~ /^\.\/debian\// );
 
+    # Nor about Changlog
+    return if ( $file =~ /^\.\/ChangeLog$/ );
+
     # Finally mercurial and git files are fine.
     return if ( $file =~ /\.(hg|git)\// );
     # See if it is a shell/perl file.

t/perl-syntax.t

@@ -11,7 +11,7 @@
 
 use strict;
 use File::Find;
-use Test::More;
+use Test::More qw/ no_plan /;
 
 eval "use Moose";
 plan skip_all => "Moose required for testing Perl syntax"
@@ -24,8 +24,6 @@ plan skip_all => "Moose required for testing Perl syntax"
 #
 find( { wanted => \&checkFile, no_chdir => 1 }, '.' );
 
-done_testing();
-
 #
 #  Check a file.
 #
@@ -43,6 +41,12 @@ sub checkFile
     # Nor about Makefiles
     return if ( $file =~ /\/Makefile$/ );
 
+    # Nor about git files
+    return if ( $file =~ /^\.\/\.git\// );
+
+    # Nor about dot files
+    return if ( $file =~ m{/\.[^/]+$} );
+
     # `modules.sh` is a false positive.
     return if ( $file =~ /modules.sh$/ );
 

t/pod-check.t

@@ -1,7 +1,7 @@
 #!/usr/bin/perl -w
 #
 #  Test that the POD we include in our scripts is valid, via the external
-# podcheck command.
+# podchecker command.
 #
 # Steve
 # --

t/pod-coverage.t

@@ -2,6 +2,8 @@ use strict;
 use warnings;
 use Test::More;
 
+push @INC, 'lib';
+
 # Ensure a recent version of Test::Pod::Coverage
 my $min_tpc = 1.08;
 eval "use Test::Pod::Coverage $min_tpc";

t/portable-shell.t

@@ -42,6 +42,7 @@ sub checkFile
 
     # We're only testing things beneath hooks
     return if ( $file !~ /hooks/ );
+    return if ( $file =~ /\.git/ );
 
     # See if it is a shell script.
     my $isShell = 0;
@@ -87,9 +88,9 @@ sub checkFile
     is( $result, 0, "Shell script passes our portability check: $file" );
 
     if (-x "/usr/bin/checkbashisms") {
-	# Check for bashisms
-	$result = `/usr/bin/checkbashisms '$file'`;
-	is( $result, '', "Shell script passes check for bashisms: $file" );
+    # Check for bashisms
+    $result = `/usr/bin/checkbashisms '$file'`;
+    is( $result, '', "Shell script passes check for bashisms: $file" );
     }
 
 }