debian/changelog: UNRELEASED -> unstable

manpage -> man page

.gitignore

@@ -0,0 +1,31 @@
+# Note! Please run 'prove t/gitignore.t' after changing
+# this file, to check its coherency
+
+# all dotfiles
+.*
+# but we _wan't_ those dot-files
+!.gitignore
+!.hgignore
+!.mailmap
+
+# ChangeLog is generated during make
+/ChangeLog
+
+# those are generated during debian package build
+/build-stamp
+/configure-stamp
+/man
+/debian/files
+/debian/xen-tools
+/debian/xen-tools.debhelper.log
+/debian/xen-tools.substvars
+
+# git-generated patches
+/*.patch
+
+# some backups
+*~
+*.orig
+
+# backups created by "make update-version"
+*.bak

.hgignore

@@ -2,3 +2,4 @@
 (^|/)\.hg($|/)
 (^|/)\.hgtags($|/)
 ChangeLog
+~$

.mailmap

@@ -0,0 +1,6 @@
+Axel Beckert <abe@deuxchevaux.org>
+Dmitry Nedospasov <dmitry@nedos.net>
+Nathan O'Sullivan <nathan@mammoth.com.au>
+Radu Spineanu <radu@debian.org> radu <none@none>
+Steve Kemp <steve@steve.org.uk> steve <none@none>
+Stéphane Jourdois <sjourdois@gmail.com> <stephane@jourdois.fr>

.release

@@ -1,34 +0,0 @@
-#
-#  Configuration file for 'release', a utility to make release more
-# easily:
-#
-#   http://release.repository.steve.org.uk/
-#
-# Steve
-# -- 
-#
-
-
-#
-#  Command to run
-#
-preupload="make release"
-
-
-#
-#
-#  Pattern for our release tarball.
-#
-pattern=xen-tools-[0-9].[0-9].tar.gz*
-
-
-#
-#  Pattern for our GPG-signature.
-#
-signature=xen-tools-[0-9].[0-9].tar.gz.asc
-
-
-#
-#  Upload location.
-#
-upload=steve@www.xen-tools.org:/home/www/www.xen-tools.org/htdocs/software/xen-tools/

AUTHORS

@@ -1,8 +1,9 @@
+Primary Authors
+---------------
 
-        
-Primary Author
---------------
-
+  Axel Beckert <abe@deuxchevaux.org>
+  Dmitry Nedospasov <dmitry@nedos.net>
+  Stéphane Jourdois <sjourdois [at] com.gmail>
   Steve Kemp <steve [at] uk.org.steve>
 
 
@@ -11,7 +12,7 @@ Contributions
 
   Listed alphabetically by surname.
 
-  C.J. Adams-Collier <cjcollier [at] com.gmail.com
+  C.J. Adams-Collier <cjcollier [at] com.gmail>
    - Added new modular structure to the code.
 
   Nick Anderson  <nick [at] net.anders0n>
@@ -48,21 +49,34 @@ Contributions
    - Improved binary detection and good suggestions.
    - Better portability for non-bash shells.
 
+  Jorge Armando Medina <jmedina [at] com.e-compugraf>
+   - Fix for backward compatibility with xvc0 serial consoles
+
   Gordon Messmer <gmessmer [at] edu.washington.u>
    - Supplied .spec file for building .rpm packages.
 
+  Wilson Neil <neil [at] uk.co.aldur>
+   - Several suggestions and code for disabling start-stop-daemon
+   - Compatibility fixups for Ubuntu.
+
+  Nathan O'Sullivan <nathan [at] au.com.mammoth>
+   - New features wrt. options and helper functions
+
   Walter Reiner <walter [at] at.wreiner>
    - Provided --image-dev + --swap-dev patch.
 
   Jameson Rollins <jrollins [at] edu.columbia.phys>
    - Provided --output + --extension code.
 
+  Michal Safranek (Wejn) <wejn [at] box.cz>
+   - Inspiration for pygrub in the install-kernel scripts
+
   Felipe Scarel <fbscarel [at] com.gmail>
    - Bugfix for --no-swap + LVM
 
   Radu Spineanu <radu [at] org.debian>
    - Supplied many small tweaks, bugfixes, and suggestions.
-   - Radu is also the Debian package maintainer and has CVS commit access.
+   - Radu is also one of the former Debian package maintainers.
 
   Henning Sprang <henning_sprang [at] de.gmx>
    - Many suggestions and useful Debian bug reports.
@@ -76,6 +90,3 @@ Contributions
   Ward Vandewege <ward [at] be.pong>
    - Made several updates for Ubuntu support.
 
-  Wilson Neil <neil [at] uk.co.aldur>
-   - Several suggestions and code for disabling start-stop-daemon
-   - Compatibility fixups for Ubuntu.

KNOWN_BUGS

@@ -0,0 +1,13 @@
+KNOWN BUGS in xen-tools
+
+Bugs to fix before a 4.2 release
+--------------------------------
+
+* xen-delete-image doesn't remove all logical volumes if --partitions is used.
+
+   See the link below for details how to reproduce. Reproducable at
+   least with --lvm. Thanks to Antoine Benkemoun for reporting.
+
+   http://xen-tools.org/pipermail/xen-tools-discuss/2010-May/000757.html
+
+* xen-delete-image ignores extension setting

Makefile

@@ -12,10 +12,14 @@
 #
 #  Only used to build distribution tarballs.
 #
+TMP        ?= /tmp
 DIST_PREFIX = ${TMP}
-VERSION     = 3.9
+VERSION     = 4.2
+DEBVERSION  = $(shell echo $(VERSION)|sed 's/\(rc\|pre\|beta\|alpha\)/~\1/')
 BASE        = xen-tools
-
+VCS         = $(shell if git ls-files > /dev/null; then echo git; \
+                    elif hg st  > /dev/null; then echo hg; \
+                    else                          echo cannot-determine-used-vcs; fi)
 
 #
 #  Installation prefix, useful for the Debian package.
@@ -42,21 +46,25 @@ nop:
 # with those details.
 #
 changelog:
-	hg log -v > ChangeLog
+	$(VCS) log -v > ChangeLog
 
 
 #
 #  Delete all temporary files, recursively.
 #
 clean:
-	@find . -name '.*~' -exec rm \{\} \;
-	@find . -name '.#*' -exec rm \{\} \;
-	@find . -name '*~' -exec rm \{\} \;
-	@find . -name '*.bak' -exec rm \{\} \;
-	@find . -name '*.tmp' -exec rm \{\} \;
-	@find . -name 'tags' -exec rm \{\} \;
-	@find . -name '*.8.gz' -exec rm \{\} \;
-	@find man -name '*.html' -exec rm \{\} \;
+	@find . \
+		-path ./.git -prune -o \
+		\( \
+			-name '*~' -o \
+			-name '.#*' -o \
+			-name '*.bak' -o \
+			-name '*.tmp' -o \
+			-name 'tags' -o \
+			-name '*.8.gz' -o \
+			-name '*.tdy' \
+		\) -exec rm "{}" +
+	@if [ -d man ]; then rm -rf man ; fi
 	@if [ -e build-stamp ]; then rm -f build-stamp ; fi
 	@if [ -e configure-stamp ]; then rm -f configure-stamp ; fi
 	@if [ -d debian/xen-tools ]; then rm -rf ./debian/xen-tools; fi
@@ -68,14 +76,14 @@ clean:
 #  If the testsuite runs correctly then commit any pending changes.
 #
 commit: test
-	hg commit
+	$(VCS) commit
 
 
 #
 #  Show what has been changed in the local copy vs. the remote repository.
 #
 diff:
-	hg diff 2>/dev/null
+	$(VCS) diff 2>/dev/null
 
 
 #
@@ -87,7 +95,7 @@ fixup-perms:
 	chmod 644 etc/xen-tools.conf
 	chmod 644 etc/xm.tmpl
 	chmod 644 etc/xm-nfs.tmpl
-	chmod 644 misc/xm misc/xen-tools misc/README
+	chmod 644 misc/xen-tools misc/README
 
 #
 #  Install files to /etc/
@@ -104,7 +112,6 @@ install-etc:
 	cp partitions/*-*     ${prefix}/etc/xen-tools/partitions.d/
 	-mkdir -p             ${prefix}/etc/bash_completion.d
 	cp misc/xen-tools     ${prefix}/etc/bash_completion.d/
-	cp misc/xm            ${prefix}/etc/bash_completion.d/
 
 
 #
@@ -120,6 +127,7 @@ install-bin:
 	cp bin/xen-delete-image     ${prefix}/usr/bin
 	cp bin/xen-list-images      ${prefix}/usr/bin
 	cp bin/xen-update-image     ${prefix}/usr/bin
+	cp bin/xt-guess-suite-and-mirror ${prefix}/usr/bin
 	chmod 755 ${prefix}/usr/bin/xen-create-image
 	chmod 755 ${prefix}/usr/bin/xen-create-nfs
 	chmod 755 ${prefix}/usr/bin/xt-customize-image
@@ -128,6 +136,7 @@ install-bin:
 	chmod 755 ${prefix}/usr/bin/xen-delete-image
 	chmod 755 ${prefix}/usr/bin/xen-list-images
 	chmod 755 ${prefix}/usr/bin/xen-update-image
+	chmod 755 ${prefix}/usr/bin/xt-guess-suite-and-mirror
 
 
 
@@ -136,6 +145,7 @@ install-bin:
 #
 install-hooks:
 	for i in roles/* ; do if [ -f $$i ]; then cp $$i ${prefix}/etc/xen-tools/role.d; fi ; done
+	for i in ${prefix}/usr/lib/xen-tools/*.d; do if [ -L "$$i" ]; then rm -vf "$$i"; fi; done
 	mkdir -p ${prefix}/usr/lib/xen-tools/centos-4.d/
 	mkdir -p ${prefix}/usr/lib/xen-tools/centos-5.d/
 	mkdir -p ${prefix}/usr/lib/xen-tools/fedora-core-6.d/
@@ -146,24 +156,38 @@ install-hooks:
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-5.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-7.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-8.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-9.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-10.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-11.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-12.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-13.d
 	mkdir -p ${prefix}/usr/lib/xen-tools/debian.d/
 	cp -R hooks/debian/*-* ${prefix}/usr/lib/xen-tools/debian.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d sarge.d
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d lenny.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d etch.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d lenny.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d squeeze.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d wheezy.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d sid.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d testing.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d stable.d
 	mkdir -p ${prefix}/usr/lib/xen-tools/gentoo.d/
 	cp -R hooks/gentoo/*-* ${prefix}/usr/lib/xen-tools/gentoo.d
-	 mkdir -p ${prefix}/usr/lib/xen-tools/edgy.d/
-	cp -R hooks/edgy/*-* ${prefix}/usr/lib/xen-tools/edgy.d/
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d feisty.d
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d gutsy.d
 	mkdir -p ${prefix}/usr/lib/xen-tools/dapper.d/
 	cp -R hooks/dapper/*-* ${prefix}/usr/lib/xen-tools/dapper.d/
 	mkdir -p ${prefix}/usr/lib/xen-tools/edgy.d/
 	cp -R hooks/edgy/*-* ${prefix}/usr/lib/xen-tools/edgy.d/
-	mkdir -p ${prefix}/usr/lib/xen-tools/dapper.d/
-	cp -R hooks/dapper/*-* ${prefix}/usr/lib/xen-tools/dapper.d/
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d feisty.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d gutsy.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d hardy.d
+	mkdir -p ${prefix}/usr/lib/xen-tools/intrepid.d/
+	cp -R hooks/intrepid/*-* ${prefix}/usr/lib/xen-tools/intrepid.d/
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s intrepid.d jaunty.d
+	mkdir -p ${prefix}/usr/lib/xen-tools/karmic.d/
+	cp -R hooks/karmic/*-* ${prefix}/usr/lib/xen-tools/karmic.d/
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d lucid.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d maverick.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d natty.d
 	cp hooks/common.sh ${prefix}/usr/lib/xen-tools
 
 
@@ -193,30 +217,39 @@ install: fixup-perms install-bin install-etc install-hooks install-libraries ins
 #  Build our manpages via the `pod2man` command.
 #
 manpages:
-	cd bin; for i in *-*; do pod2man --release=${VERSION} --official --section=8 $$i ../man/$$i.8; done
+	-mkdir -p man
+	cd bin; for i in *-*[!y]; do pod2man --release=${VERSION} --official --section=8 $$i ../man/$$i.8; done
 	for i in man/*.8; do gzip --force -9 $$i; done
 
 
 #
 #  Make a new release tarball, and make a GPG signature.
 #
-release: fixup-perms update-version update-modules clean changelog
+release: tidy fixup-perms update-version update-modules clean changelog
 	rm -rf $(DIST_PREFIX)/$(BASE)-$(VERSION)
 	rm -f $(DIST_PREFIX)/$(BASE)-$(VERSION).tar.gz
 	cp -R . $(DIST_PREFIX)/$(BASE)-$(VERSION)
 	rm -rf $(DIST_PREFIX)/$(BASE)-$(VERSION)/debian
 	rm -rf $(DIST_PREFIX)/$(BASE)-$(VERSION)/.hg*
+	rm -rf $(DIST_PREFIX)/$(BASE)-$(VERSION)/.git*
 	cd $(DIST_PREFIX) && tar -cvf $(DIST_PREFIX)/$(BASE)-$(VERSION).tar $(BASE)-$(VERSION)/
 	gzip $(DIST_PREFIX)/$(BASE)-$(VERSION).tar
 	mv $(DIST_PREFIX)/$(BASE)-$(VERSION).tar.gz .
 	rm -rf $(DIST_PREFIX)/$(BASE)-$(VERSION)
 	gpg --armour --detach-sign $(BASE)-$(VERSION).tar.gz
 
+#
+#  Make a new orig.tar.gz for the Debian package
+#
+orig-tar-gz: release
+	mv $(BASE)-$(VERSION).tar.gz ../$(BASE)_$(DEBVERSION).orig.tar.gz
+	mv $(BASE)-$(VERSION).tar.gz.asc ../$(BASE)_$(DEBVERSION).orig.tar.gz.asc
+
 
 #
 #  Run the test suite.
 #
-test:
+test: update-modules
 	prove --shuffle t/
 
 
@@ -228,6 +261,17 @@ test-verbose:
 
 
 
+#
+#  Run our main script(s) through perltidy
+#
+tidy:
+	if [ -x /usr/bin/perltidy ]; then \
+	for i in bin/*-*[^~]; do \
+		echo "tidying $$i"; \
+		perltidy  $$i \
+	; done \
+	; fi
+
 #
 #  Uninstall the software, completely.
 #
@@ -240,12 +284,12 @@ uninstall:
 	rm -f ${prefix}/usr/bin/xt-install-image
 	rm -f ${prefix}/usr/bin/xt-create-xen-config
 	rm -f ${prefix}/usr/bin/xen-create-nfs
+	rm -f ${prefix}/usr/bin/xt-guess-suite-and-mirror
 	rm -f ${prefix}/etc/xen-tools/xen-tools.conf
 	rm -f ${prefix}/etc/xen-tools/xm.tmpl
 	-rm -rf ${prefix}/etc/xen-tools/skel
 	-rmdir ${prefix}/etc/xen-tools/
 	-rm -f ${prefix}/etc/bash_completion.d/xen-tools
-	-rm -f ${prefix}/etc/bash_completion.d/xm
 	rm -rf ${prefix}/usr/lib/xen-tools
 	rm -f ${prefix}/usr/share/man/man8/xen-create-image.8.gz
 	rm -f ${prefix}/usr/share/man/man8/xen-delete-image.8.gz
@@ -258,8 +302,8 @@ uninstall:
 #
 #  NOTE: Removes empty local directories.
 #
-update: 
-	hg pull --update 2>/dev/null
+update:
+	$(VCS) pull --update 2>/dev/null
 
 
 #
@@ -267,7 +311,7 @@ update:
 # cases to ensure that all required modules are available.
 #
 update-modules:
-	cd t && make modules
+	@cd t && make modules
 
 
 #
@@ -275,4 +319,4 @@ update-modules:
 # at the top of this file.  Steve-Specific?
 #
 update-version:
-	perl -pi.bak -e "s/RELEASE = '[0-9]\.[0-9]';/RELEASE = '${VERSION}';/g" bin/*-*
+	perl -pi.bak -e "s/RELEASE = '[0-9]\.[0-9][^']*';/RELEASE = '${VERSION}';/g" bin/*-*[!~]

README

@@ -1,30 +1,58 @@
+xen-tools
+---------
 
 Homepage:
     http://www.xen-tools.org/software/xen-tools
 
-Mercurial Repository:
-    http://xen-tools.repository.steve.org.uk/
+Git Repository:
+    http://gitorious.org/xen-tools
 
 Mailing Lists:
-    http://xen-tools.org/software/xen-tools/lists.html
+    http://www.xen-tools.org/software/xen-tools/lists.html
 
-
-
-xen-tools
----------
-
-  The xen-tools package contains a collection of Perl scripts for
- working with Xen guest images under Debian GNU/Linux.
+About:
+  Xen-tools contains a collection of Perl scripts for working with Xen
+ guest images under Linux.
 
   Using this software, you can easily create new Xen guests configured
- to be accessible over your local network and complete with an installed
- copy of OpenSSH.
+ to be accessible over the network via OpenSSH.
 
-  This software is primarily aimed at users who wish to create virtual 
- instances of Debian Sarge, Etch, or Sid.  Although other distributions
- such as Ubuntu Dapper, Edgy, and Feisty are supported if you have the
- appropriate packages installed.
+  xen-tools currently has scripts to install most releases of Debian
+ (starting with 3.1 "Sarge") and Ubuntu (starting with 6.06 LTS
+ "Dapper") and some RPM-based distributions.
 
+  However, currently only Debian and Ubuntu releases are tested and
+ known to work, i.e.:
+
+	Debian:
+	  * Sarge 3.1 (i386 only)
+	  * Etch 4.0
+	  * Lenny 5.0
+	  * Squeeze 6.0
+	  * Wheezy 7.0 (preliminary support as it's not yet available)
+	  * Sid (works at least at the moment of writing :-)
+
+	Ubuntu:
+	  * Dapper Drake 6.06
+	  * Edgy Eft 6.10
+	  * Feisty Fawn 7.04
+	  * Gutsy Gibbon 7.10
+	  * Hardy Heron 8.04 (see [1])
+	  * Interpid Ibex 8.10
+	  * Jaunty Jackaplope 9.04
+	  * Karmic Koala 9.10
+	  * Lucid Lynx 10.04
+	  * Maverick Meerkat 10.10 (works at least at the moment of writing :-)
+	  * Natty Narwhal 11.04 (preliminary support as it's not yet available)
+
+  [1] There is an issue with debootstrap on hardy not installing ksyslogd
+      This can be fixed by chrooting into the newly installed system
+      and removing the startup scripts. See:
+      http://www.linux-vserver.org/Installing_Ubuntu_8.04_Hardy_as_guest
+
+  Xen-Tools are available prepackaged in Debian and as source tar-ball
+ for local installation. Installing from source should work flawlessly
+ on most Linux systems that meet the installation requirements.
 
 Requirements
 ------------
@@ -37,34 +65,34 @@ Requirements
         * The Perl module "Config::IniFiles"
           - Both of these modules are available as Debian packages,
             or direct from http://www.cpan.org/ for non-Debian distributions.
+        * Make, if you are not installing through a package manager
 
-
-  In order to install RPM-based distributions such as CentOS, or
- Fedora Core you will need a correctly installed and configured
- "rinse" package.
-
-  To install Ubuntu distributions upon a Debian host system you will
- need either:
-
-        * The Ubuntu version of debootstrap installed.
-        * A patched debootstrap package from:
-                http://steve.org.uk/Software/tmp/debootstrap/
+  You can try to install RPM-based distributions such as CentOS, or
+ Fedora Core, but you will need a correctly installed and configured
+ "rinse" package. This is currently not supported.
 
   If you wish to create new Xen instances which may be controlled by
- users via a login shell you should also install the xen-shell package
- which is available from:
+ users via a login shell you can have a look at the (currently
+ unmaintained) xen-shell package which is available from:
 
           http://xen-tools.org/software/xen-shell/
 
 
+Installation
+------------
+
+As root or with sudo, execute "make install".
+
+See debian/README.source how to build the Debian package from a
+checked out copy of the git repository (i.e. without a source tar
+ball).
+
 
 The Scripts
 -----------
 
-  There now follows a brief description of each included script,
- for more thorough documentation please consult the appropriate
- manpage.
-
+  Here is a brief description of each included script, for more
+ thorough documentation please consult the appropriate man page.
 
 
 xen-create-image
@@ -73,10 +101,6 @@ xen-create-image
   This script is designed to create new images which may be used
  with the Xen hypervisor.
 
-  The virtual images will have their networking settings created and,
- you may optionally cause the new instance to boot once it has
- been created.
-
   This script performs the initial setup, then delegates the real
  work to a collection of helper scripts:
 
@@ -91,6 +115,11 @@ xen-create-image
       Create a configuration file in /etc/xen such that Xen can
       boot the newly created machine.
 
+    * xt-guess-suite-and-mirror
+      In case of a Debian or Ubuntu Dom0, this script tries to guess
+      the most suitable suite and mirror for DomUs based on the Dom0's
+      /etc/apt/sources.list.
+
 
 xen-create-nfs
 --------------
@@ -132,6 +161,5 @@ xen-update-image
     a Debian-derived distribution.
 
 
-Steve
---
-
+-- 
+The Xen-Tools Developer Team

TODO

@@ -1,16 +1,151 @@
 TODO
-----
+====
 
-  1. Test and support more file system types.  Actually this should be
-    pretty simple now that the parameters are stored in the configuration
-    hash.  The only issue is that trailing whitespace is missing from the
-    "make_fs_foo" option.
+See KNOWN_BUGS for real bugs.
 
-  2. Write more test cases.
+Bugs to fix and features to add for 5.0
+---------------------------------------
 
-  3. LVM snapshot support as an install source.
+* xen-create-image man page overhaul:
 
-  4. xen-delete-image should unallocate any used IP addresses.
+- ambiguous option list with regards to parameters
+- Set Fail in more situations where the script has clearly failed
+  i.e.: lvm exists
 
-Steve
---
+* Test and support more file system types.
+
+   Actually this should be pretty simple now that the parameters are
+   stored in the configuration hash.
+
+* Setup locales in the hooks?
+
+   Currently no locales are set and this causes several domU errors
+   which appear in the domU's logs.
+
+* Documentation overhaul
+
+   Better explain what roles /should be/ used for, and that roles
+   are examples, and shouldn't cover every single scenario. They
+   are also easy to write.
+
+* xen-create-image --dist=... / sources.list generation should be more fine-grained
+
+   xen-tools should offer the possibility to enable/disable
+   security/volatile/backports as well as
+   contrib/non-free/universe/restricted/multiverse for each of them
+   not only based on defaults plus the Dom0's sources.list
+
+   One idea is to allow parameters like
+
+   --dist="lenny:main,contrib,non-free;security;volatile:main"
+
+   and maybe (if the default will be to include security) to also
+   allow
+
+   --dist="lenny;no-security"
+
+   The second idea (by Mathieu Parent) is to have an
+   /etc/xen-tools/sources.list.d/ which then contains files like
+   lenny.list, lenny-server.list, karmic.list, etc. which defaults to
+   $dist.list, but can be also select with --sources-list=lenny-server
+   (which looks for ./lenny-server.list, ./lenny-server,
+   /etc/xen-tools/sources.list.d/lenny-server.list and
+   /etc/xen-tools/sources.list.d/lenny-server in that order).
+
+   Third variant is to use /etc/xen-tools/sources.lists/ instead of
+   /etc/xen-tools/sources.list.d/ because that directory is no
+   runparts-like directory.
+
+* LVM snapshot support as an install source.
+
+* Clean up mounts on Ctrl-C, causes error while installing otherwise:
+
+   Removing /dev/vg0/acromantula-domu1-disk - since we're forcing the
+   install Can't remove open logical volume "acromantula-domu1-disk"
+   this should be a matter of unmounting the mounted volume from /tmp.
+
+* Generic grub support
+
+   This will generate a much nicer menu.lst as a side effect, as its
+   currently generated once at install, and is never updated. Installing
+   a full grub into the domU should update the menu.lst every time a
+   new kernel is installed and will also use the domU distro's menu.lst
+   conform.
+
+* pv-grub support
+
+   This is a ways away and will probably start with a xen-pv-grub
+   package.
+
+* Move the hooks directory to /etc/xen-tools/ to officially allow
+   added and modified hooks.
+
+* Clean up the hooks directory
+
+   Currently we have one directory for Ubuntu and Fedora named after
+   the first supported release which is then duplicated for each
+   subsequent release.
+
+   I'm sure this won't scale forever. So to minimise code duplication
+   I'd like to have one common directory per distribution (e.g. called
+   ubuntu-common, fedora-common, debian-common, maybe even deb-common,
+   rpm-common or yum-common for dpkg/apt-, rpm/yum-based
+   distributions, etc.) with generic hooks valid for all or most of
+   the releases of one distribution and then one hook directory per
+   release (e.g. called ubuntu-10.04 or ubuntu-lucid or so) which has
+   symbolic links to everything which can be used unchanged from the
+   common directory and new files for everything which has to be
+   different or only there.
+
+* Create users, add ssh pubkeys to .ssh/authorized_keys
+
+   Still have to think of a good way of doing this. It would be nice
+   To specify a directory of public keys, parsing the hostnames
+   parsing the usernames from the ssh comment line
+
+* More generic roles
+
+   Deploy a web server or setup ssmtp directly via flag when setting up
+   the machine. Open to suggestions, should just be some general use-cases
+   that are fairly common.
+
+* Sections for the xen-tools.conf file
+
+   Currently it's really annoying when you are trying to create VMs
+   on multiple subnets. It would be nice to specify with a flag what
+   "type" of configuration you want, and a set of options specific to
+   that flag could be parsed from xen-tools.conf
+
+* Refactor the code for less code duplication
+
+   Like e.g. readConfigurationFile in xen-create-image and
+   xen-resize-image which are not completely identical.
+
+* Refactor the code for less variants of calling cp, rm, mv, etc.
+
+   E.g. always use either cp() from File::Copy or /bin/cp, but not
+   both. To allow verbose copying, I (Axel) would prefer /bin/cp over
+   cp();
+
+* Parse numerical parameters transparently for the user
+
+   The user shouldn't have to know weather he should specify size
+   as <size>G or <size>Gb or <size>. This should be parsed without
+   user interaction and rely on a common format.
+
+* xen-update-image should mount /dev/pts before running apt-get
+
+* xen-update-image should have options for using ...
+
+   ... aptitude instead of apt-get
+
+   ... dist-upgrade instead of upgrade
+
+* Use Perl::Critic
+
+Stuff from Steve's TODO list / Generic TODOs
+--------------------------------------------
+
+* Write more test cases.
+
+* xen-delete-image should unallocate any used IP addresses.

bin/xen-create-nfs

@@ -19,8 +19,9 @@ xen-create-nfs - Create a Xen configuration file for an NFS-root guest.
    --dhcp       Configure the guest to use DHCP for IP allocation.
    --gateway    The gateway address to use when configured with a static IP.
    --hostname   The hostname to configure for the guest.
-   --netmask    The netmask to use when configured with a static IP.
    --ip         The IP address to use when configured with a static IP.
+   --netmask    The netmask to use when configured with a static IP.
+   --nameserver The nameserver to use when configured with a static IP.
 
   General options:
    --admins     Specify which users should be setup as xen-shell admins.
@@ -83,18 +84,18 @@ Show the version number and exit.
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Stéphane Jourdois
 
 =cut
 
 
 =head1 LICENSE
 
-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -124,23 +125,23 @@ my %CONFIG;
 #
 #  Default options
 #
-$CONFIG{'template'} = '/etc/xen-tools/xm-nfs.tmpl';
+$CONFIG{ 'template' } = '/etc/xen-tools/xm-nfs.tmpl';
 
 
 #
 # Release number.
 #
-my $RELEASE = '3.9';
+my $RELEASE = '4.2';
 
 
 # store version number away.
-$CONFIG{'xen_tools_version'} = $RELEASE;
+$CONFIG{ 'xen_tools_version' } = $RELEASE;
 
 
 #
 #  Read the global configuration file.
 #
-readConfigurationFile( "/etc/xen-tools/xen-tools.conf" );
+readConfigurationFile("/etc/xen-tools/xen-tools.conf");
 
 
 #
@@ -161,13 +162,13 @@ testArguments();
 if ( -e "/etc/xen/$CONFIG{'hostname'}.cfg" )
 {
     die "Configuration file for $CONFIG{'hostname'} already exists"
-      unless( $CONFIG{'force'} );
+      unless ( $CONFIG{ 'force' } );
 }
 
 #
 #  If we've been given any administrators then set them up.
 #
-if ( $CONFIG{'admins'} )
+if ( $CONFIG{ 'admins' } )
 {
     setupAdminUsers();
 }
@@ -197,20 +198,20 @@ exit;
 
 sub readConfigurationFile
 {
-    my ($file) = ( @_ );
+    my ($file) = (@_);
 
     # Don't read the file if it doesn't exist.
-    return if ( ! -e $file );
+    return if ( !-e $file );
 
 
     my $line = "";
 
     open( FILE, "<", $file ) or die "Cannot read file '$file' - $!";
 
-    while (defined($line = <FILE>) )
+    while ( defined( $line = <FILE> ) )
     {
         chomp $line;
-        if ($line =~ s/\\$//)
+        if ( $line =~ s/\\$// )
         {
             $line .= <FILE>;
             redo unless eof(FILE);
@@ -220,7 +221,7 @@ sub readConfigurationFile
         next if ( $line =~ /^([ \t]*)\#/ );
 
         # Skip blank lines
-        next if ( length( $line ) < 1 );
+        next if ( length($line) < 1 );
 
         # Strip trailing comments.
         if ( $line =~ /(.*)\#(.*)/ )
@@ -243,6 +244,7 @@ sub readConfigurationFile
             # command expansion?
             if ( $val =~ /(.*)`([^`]+)`(.*)/ )
             {
+
                 # store
                 my $pre  = $1;
                 my $cmd  = $2;
@@ -250,7 +252,7 @@ sub readConfigurationFile
 
                 # get output
                 my $output = `$cmd`;
-                chomp( $output );
+                chomp($output);
 
                 # build up replacement.
                 $val = $pre . $output . $post;
@@ -261,7 +263,7 @@ sub readConfigurationFile
         }
     }
 
-    close( FILE );
+    close(FILE);
 }
 
 
@@ -286,48 +288,49 @@ sub parseCommandLineArguments
     #
     GetOptions(
 
-               # Networking options
-               "dhcp",         \$CONFIG{'dhcp'},
-               "gateway=s",    \$CONFIG{'gateway'},
-               "broadcast=s",  \$CONFIG{'broadcast'},
-               "ip=s",         \$CONFIG{'ip'},
-               "netmask=s",    \$CONFIG{'netmask'},
-               "hostname=s",   \$CONFIG{'hostname'},
-               "memory=s",     \$CONFIG{'memory'},
-               "mac=s",        \$CONFIG{'mac'},
+        # Networking options
+        "dhcp",         \$CONFIG{ 'dhcp' },
+        "gateway=s",    \$CONFIG{ 'gateway' },
+        "broadcast=s",  \$CONFIG{ 'broadcast' },
+        "ip=s",         \$CONFIG{ 'ip' },
+        "netmask=s",    \$CONFIG{ 'netmask' },
+        "nameserver=s", \$CONFIG{ 'nameserver' },
+        "hostname=s",   \$CONFIG{ 'hostname' },
+        "memory=s",     \$CONFIG{ 'memory' },
+        "mac=s",        \$CONFIG{ 'mac' },
 
-               # NFS options.
-               "nfs_server=s", \$CONFIG{'nfs_server'},
-               "nfs_root=s",   \$CONFIG{'nfs_root'},
+        # NFS options.
+        "nfs_server=s", \$CONFIG{ 'nfs_server' },
+        "nfs_root=s",   \$CONFIG{ 'nfs_root' },
 
-               # Misc. options
-               "admins=s",     \$CONFIG{'admins'},
-               "kernel=s",     \$CONFIG{'kernel'},
-               "initrd=s",     \$CONFIG{'initrd'},
-               "force",        \$CONFIG{'force'},
-               "template=s",   \$CONFIG{'template'},
+        # Misc. options
+        "admins=s",   \$CONFIG{ 'admins' },
+        "kernel=s",   \$CONFIG{ 'kernel' },
+        "initrd=s",   \$CONFIG{ 'initrd' },
+        "force",      \$CONFIG{ 'force' },
+        "template=s", \$CONFIG{ 'template' },
 
-               # Help options
-               "help",         \$HELP,
-               "manual",       \$MANUAL,
-               "verbose",      \$CONFIG{'verbose'},
-               "version",      \$VERSION
+        # Help options
+        "help",    \$HELP,
+        "manual",  \$MANUAL,
+        "verbose", \$CONFIG{ 'verbose' },
+        "version", \$VERSION
 
-              );
+    );
 
     pod2usage(1) if $HELP;
-    pod2usage(-verbose => 2 ) if $MANUAL;
+    pod2usage( -verbose => 2 ) if $MANUAL;
 
 
-    if ( $VERSION )
+    if ($VERSION)
     {
-        my $REVISION      = '$Revision: 1.13 $';
+        my $REVISION = '$Revision: 1.13 $';
         if ( $REVISION =~ /1.([0-9.]+) / )
         {
             $REVISION = $1;
         }
 
-        logprint( "xen-create-nfs release $RELEASE - CVS: $REVISION\n" );
+        logprint("xen-create-nfs release $RELEASE - CVS: $REVISION\n");
         exit;
     }
 }
@@ -344,36 +347,37 @@ sub parseCommandLineArguments
 
 sub testArguments
 {
+
     #
     #  Hostname is mandatory
     #
-    die "No hostname" unless( $CONFIG{'hostname'} );
+    die "No hostname" unless ( $CONFIG{ 'hostname' } );
 
     my @network = qw/ ip gateway netmask /;
 
     #
     #  If DHCP then all the other options aren't needed
     #
-    if ( $CONFIG{'dhcp'} )
+    if ( $CONFIG{ 'dhcp' } )
     {
-        foreach my $f ( @network )
+        foreach my $f (@network)
         {
             delete( $CONFIG{ $f } );
         }
     }
     else
     {
-        foreach my $f ( @network )
+        foreach my $f (@network)
         {
-            die "Missing --$f" unless( $CONFIG{$f} );
+            die "Missing --$f" unless ( $CONFIG{ $f } );
         }
     }
 
     #
     #  We need an NFS server + root
     #
-    die "Missing NFS server." unless( $CONFIG{'nfs_server'} );
-    die "Missing NFS root."   unless( $CONFIG{'nfs_root'} );
+    die "Missing NFS server." unless ( $CONFIG{ 'nfs_server' } );
+    die "Missing NFS root."   unless ( $CONFIG{ 'nfs_root' } );
 
 
     # All OK.
@@ -381,7 +385,6 @@ sub testArguments
 
 
 
-
 =begin doc
 
   This routine is designed to ensure that any users specified with
@@ -393,6 +396,7 @@ sub testArguments
 
 sub setupAdminUsers
 {
+
     #
     #  If we're not root we can't modify users.
     #
@@ -401,24 +405,26 @@ sub setupAdminUsers
     #
     #  If we don't have a sudoers file then we'll also ignore this.
     #
-    return if ( ! -e "/etc/sudoers" );
+    return if ( !-e "/etc/sudoers" );
 
     #
     #  Find the path to the xen-login-shell
     #
     my $shell = undef;
     $shell = "/usr/bin/xen-login-shell" if ( -x "/usr/bin/xen-login-shell" );
-    $shell = "/usr/local/bin/xen-login-shell" if ( -x "/usr/bin/local/xen-login-shell" );
+    $shell = "/usr/local/bin/xen-login-shell"
+      if ( -x "/usr/bin/local/xen-login-shell" );
 
-    return if ( !defined( $shell ) );
+    return if ( !defined($shell) );
 
 
     #
     #  For each user make sure they exist, and setup the
     # login shell for them.
     #
-    foreach my $user ( split( /,/, $ENV{'admins'} ) )
+    foreach my $user ( split( /,/, $ENV{ 'admins' } ) )
     {
+
         # Strip leading and trailing whitespace.
         $user =~ s/^\s+//;
         $user =~ s/\s+$//;
@@ -429,23 +435,27 @@ sub setupAdminUsers
         # Does the user exist?
         if ( getpwnam($user) )
         {
+
             # Change shell.
-            $CONFIG{'verbose'} && print "Changing shell for $user: $shell\n";
+            $CONFIG{ 'verbose' } && print "Changing shell for $user: $shell\n";
             system( "chsh", "-s", $shell, $user );
         }
         else
         {
+
             # Add a new user.
-            $CONFIG{'verbose'} && print "Adding new user: $user\n";
+            $CONFIG{ 'verbose' } && print "Adding new user: $user\n";
             system( "useradd", "-s", $shell, $user );
         }
 
         #
         #  Add the entry to /etc/sudoers.
         #
-        open( SUDOERS, ">>", "/etc/sudoers" ) or warn "Failed to add user to sudoers file : $user - $!";
-        print SUDOERS "$user ALL = NOPASSWD: /usr/sbin/xm, /usr/bin/xen-create-image\n";
-        close( SUDOERS );
+        open( SUDOERS, ">>", "/etc/sudoers" ) or
+          warn "Failed to add user to sudoers file : $user - $!";
+        print SUDOERS
+          "$user ALL = NOPASSWD: /usr/sbin/xm, /usr/bin/xen-create-image\n";
+        close(SUDOERS);
 
     }
 }
@@ -461,15 +471,16 @@ sub setupAdminUsers
 
 sub createNewConfigurationFile
 {
-    die "Template file missing: $CONFIG{'template'}" unless( -e $CONFIG{'template'} );
+    die "Template file missing: $CONFIG{'template'}"
+      unless ( -e $CONFIG{ 'template' } );
 
     #
     #  Load the template.
     #
     my $template = new Text::Template( TYPE   => 'FILE',
-                                       SOURCE => $CONFIG{'template'} );
+                                       SOURCE => $CONFIG{ 'template' } );
 
-    my $result   = $template->fill_in( HASH => \%CONFIG );
+    my $result = $template->fill_in( HASH => \%CONFIG );
 
     #
     #  The file we'll write to.
@@ -481,5 +492,5 @@ sub createNewConfigurationFile
     #
     open( FILE, ">", $file ) or die "Failed to write to $file - $!";
     print FILE $result;
-    close( FILE );
+    close(FILE);
 }

bin/xen-delete-image

@@ -16,8 +16,8 @@ xen-delete-image - Delete previously created Xen instances.
 
   General options:
    --dir      Specify the output directory where images were previously saved.
-   --lvm      Specify the LVM volume to use.
    --evms     Specify the EVMS container to use.
+   --lvm      Specify the LVM volume to use.
 
   Specifying hosts:
    --hostname Specify the image name to delete.
@@ -51,7 +51,7 @@ Specify the LVM volume group where images were previously saved.
 Read the manual for this script.
 
 =item B<--test>
-Don not complain, or exit, if the script is not executed by the root user.
+Do not complain, or exit, if the script is not executed by the root user.
 
 =item B<--version>
 Show the version number and exit.
@@ -130,18 +130,19 @@ Show the version number and exit.
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
 
 =cut
 
 
 =head1 LICENSE
 
-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -156,6 +157,7 @@ use strict;
 use English;
 use Getopt::Long;
 use Pod::Usage;
+use File::Path;
 
 
 #
@@ -169,8 +171,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '3.9';
-
+my $RELEASE = '4.2';
 
 
 
@@ -179,7 +180,7 @@ my $RELEASE = '3.9';
 #
 if ( -e "/etc/xen-tools/xen-tools.conf" )
 {
-    readConfigurationFile( "/etc/xen-tools/xen-tools.conf" );
+    readConfigurationFile("/etc/xen-tools/xen-tools.conf");
 }
 
 
@@ -199,7 +200,7 @@ checkArguments();
 #
 #  Abort if non-root user.
 #
-if ( (!$CONFIG{'test'}) && ( $EFFECTIVE_USER_ID != 0 ) )
+if ( ( !$CONFIG{ 'test' } ) && ( $EFFECTIVE_USER_ID != 0 ) )
 {
     print <<E_O_ROOT;
 
@@ -217,11 +218,11 @@ E_O_ROOT
 #  Loop over the supplied arguments, and attempt to delete each
 # image.
 #
-while( my $name = shift )
+while ( my $name = shift )
 {
-    if ( !xenRunning( $name ) )
+    if ( !xenRunning($name) )
     {
-        deleteXenImage( $name );
+        deleteXenImage($name);
     }
     else
     {
@@ -232,12 +233,12 @@ while( my $name = shift )
 #
 #  Also delete any which were specified using the --hostname flag
 #
-my $hosts = $CONFIG{'hostname'};
-foreach my $name ( @$hosts )
+my $hosts = $CONFIG{ 'hostname' };
+foreach my $name (@$hosts)
 {
-    if ( !xenRunning( $name ) )
+    if ( !xenRunning($name) )
     {
-        deleteXenImage( $name );
+        deleteXenImage($name);
     }
     else
     {
@@ -252,7 +253,6 @@ exit 0;
 
 
 
-
 =begin doc
 
   Read the configuration file specified.
@@ -263,16 +263,16 @@ exit 0;
 
 sub readConfigurationFile
 {
-    my ($file) = ( @_ );
+    my ($file) = (@_);
 
     open( FILE, "<", $file ) or die "Cannot read file '$file' - $!";
 
-    my $line       = "";
+    my $line = "";
 
-    while (defined($line = <FILE>) )
+    while ( defined( $line = <FILE> ) )
     {
         chomp $line;
-        if ($line =~ s/\\$//)
+        if ( $line =~ s/\\$// )
         {
             $line .= <FILE>;
             redo unless eof(FILE);
@@ -282,7 +282,7 @@ sub readConfigurationFile
         next if ( $line =~ /^([ \t]*)\#/ );
 
         # Skip blank lines
-        next if ( length( $line ) < 1 );
+        next if ( length($line) < 1 );
 
         # Strip trailing comments.
         if ( $line =~ /(.*)\#(.*)/ )
@@ -305,6 +305,7 @@ sub readConfigurationFile
             # command expansion?
             if ( $val =~ /(.*)`([^`]+)`(.*)/ )
             {
+
                 # store
                 my $pre  = $1;
                 my $cmd  = $2;
@@ -312,7 +313,7 @@ sub readConfigurationFile
 
                 # get output
                 my $output = `$cmd`;
-                chomp( $output );
+                chomp($output);
 
                 # build up replacement.
                 $val = $pre . $output . $post;
@@ -323,12 +324,11 @@ sub readConfigurationFile
         }
     }
 
-    close( FILE );
+    close(FILE);
 }
 
 
 
-
 =begin doc
 
   Parse the arguments specified upon the command line.
@@ -342,36 +342,37 @@ sub parseCommandLineArguments
     my $HELP    = 0;
     my $MANUAL  = 0;
     my $VERSION = 0;
+    $CONFIG{ 'dry-run' } = 0;
 
     #  Parse options.
     #
-    GetOptions(
-              "dir=s",       \$CONFIG{'dir'},
-              "lvm=s",       \$CONFIG{'lvm'},
-              "evms=s",      \$CONFIG{'evms'},
-              "hostname=s@", \$CONFIG{'hostname'},
-              "test",        \$CONFIG{'test'},
-              "verbose",     \$CONFIG{'verbose'},
-              "help",        \$HELP,
-              "manual",      \$MANUAL,
-              "version",     \$VERSION
-             );
+    GetOptions( "dir=s",       \$CONFIG{ 'dir' },
+                "dry-run",     \$CONFIG{ 'dry-run' },
+                "lvm=s",       \$CONFIG{ 'lvm' },
+                "evms=s",      \$CONFIG{ 'evms' },
+                "hostname=s@", \$CONFIG{ 'hostname' },
+                "test",        \$CONFIG{ 'test' },
+                "verbose",     \$CONFIG{ 'verbose' },
+                "help",        \$HELP,
+                "manual",      \$MANUAL,
+                "version",     \$VERSION
+              );
 
     pod2usage(1) if $HELP;
-    pod2usage(-verbose => 2 ) if $MANUAL;
+    pod2usage( -verbose => 2 ) if $MANUAL;
 
 
-    if ( $VERSION )
+    if ($VERSION)
     {
-       my $REVISION      = '$Revision: 1.41 $';
+        my $REVISION = '$Revision: 1.41 $';
 
-       if ( $REVISION =~ /1.([0-9.]+) / )
-       {
-           $REVISION = $1;
-       }
+        if ( $REVISION =~ /1.([0-9.]+) / )
+        {
+            $REVISION = $1;
+        }
 
-       print "xen-delete-image release $RELEASE - CVS: $REVISION\n";
-       exit;
+        print "xen-delete-image release $RELEASE - CVS: $REVISION\n";
+        exit;
 
     }
 }
@@ -388,22 +389,23 @@ sub parseCommandLineArguments
 
 sub checkArguments
 {
+
     #
     #  When testing we only care about loopback images, not disk images.
     #
-    if ( $CONFIG{'test'} )
+    if ( $CONFIG{ 'test' } )
     {
-        $CONFIG{'lvm'}  = undef;
-        $CONFIG{'evms'} = undef;
+        $CONFIG{ 'lvm' }  = undef;
+        $CONFIG{ 'evms' } = undef;
     }
 
     #
     #  Make sure we got one and only one installation method.
     #
     my $count = 0;
-    foreach my $type ( qw/dir lvm evms/ )
+    foreach my $type (qw/dir lvm evms/)
     {
-        $count += 1 if defined( $CONFIG{$type} );
+        $count += 1 if defined( $CONFIG{ $type } );
     }
 
     #
@@ -412,17 +414,16 @@ sub checkArguments
     #
     if ( $count != 1 )
     {
-       print "Please select one and only one of the installation methods:\n";
-       print " --dir\n";
-       print " --evms\n";
-       print " --lvm\n";
-       exit;
+        print "Please select one and only one of the installation methods to delete the DomU:\n";
+        print " --dir\n";
+        print " --evms\n";
+        print " --lvm\n";
+        exit;
     }
 }
 
 
 
-
 =begin doc
 
   Test to see if the given instance is running.
@@ -433,20 +434,20 @@ sub checkArguments
 
 sub xenRunning
 {
-    my( $hostname ) =  (@_ );
+    my ($hostname) = (@_);
 
     my $running = 0;
 
-    open( CMD, "xm list $hostname 2>/dev/null |")
-      or die "Failed to run 'xm list $hostname'";
-    while( <CMD> )
+    open( CMD, "xm list $hostname 2>/dev/null |" ) or
+      die "Failed to run 'xm list $hostname'";
+    while (<CMD>)
     {
         my $line = $_;
-        $running = 1 if ( $line =~ /\Q$hostname\E/ )
+        $running = 1 if ( $line =~ /\Q$hostname\E/ );
     }
-    close( CMD );
+    close(CMD);
 
-    return( $running );
+    return ($running);
 }
 
 
@@ -461,7 +462,7 @@ sub xenRunning
 
 sub deleteXenImage
 {
-    my ($hostname) = ( @_ );
+    my ($hostname) = (@_);
 
     #
     #  Collect the names of files to delete.
@@ -487,12 +488,16 @@ sub deleteXenImage
     #
     #  If we're working on disk images remove them.
     #
-    foreach my $file ( @delete )
+    foreach my $file (@delete)
     {
         if ( -e $file )
         {
-            print "Deleting: $file\n";
-            unlink( $file );
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would delete: $file\n";
+            } else {
+                print "Deleting: $file\n";
+                unlink($file);
+            }
         }
         else
         {
@@ -501,71 +506,95 @@ sub deleteXenImage
     }
 
 
-    if ( defined( $CONFIG{'dir'} ) )
+    if ( defined( $CONFIG{ 'dir' } ) )
     {
-       my $prefix = $CONFIG{'dir'} . "/domains/";
+        my $prefix = $CONFIG{ 'dir' } . "/domains/";
 
-       #
-       #  Now remove the directory.
-       #
-       if ( -d $prefix . $hostname )
-       {
-           print "Removing: " . $prefix . $hostname . "\n";
-           rmdir ( $prefix . $hostname );
-       }
+        #
+        #  Now remove the directory.
+        #
+        if ( -d $prefix . $hostname )
+        {
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would delete: $prefix$hostname\n";
+            } else {
+                print "Removing: " . $prefix . $hostname . "\n";
+                rmtree( $prefix . $hostname );
+            }
+        }
     }
-    elsif ( defined( $CONFIG{'lvm'} ) )
+    elsif ( defined( $CONFIG{ 'lvm' } ) )
     {
-       #
-       #  LVM volumes
-       #
-       #
-       #  TODO: Check we're not mounted.
-       #
 
-       if ( -e "/dev/$CONFIG{'lvm'}/$hostname-swap" )
-       {
-           print "Removing swap volume\n";
-           runCommand( "lvremove /dev/$CONFIG{'lvm'}/$hostname-swap --force" );
-       }
+        #
+        #  LVM volumes
+        #
+        #
+        #  TODO: Check we're not mounted.
+        #
 
-       if ( -e "/dev/$CONFIG{'lvm'}/$hostname-disk" )
-       {
-           print "Removing LVM disk volume\n";
-           runCommand( "lvremove /dev/$CONFIG{'lvm'}/$hostname-disk --force" );
-       }
+        if ( -e "/dev/$CONFIG{'lvm'}/$hostname-swap" )
+        {
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would remove LVM swap volume /dev/$CONFIG{'lvm'}/$hostname-swap\n";
+            } else {
+                print "Removing swap volume\n";
+                runCommand("lvremove /dev/$CONFIG{'lvm'}/$hostname-swap --force");
+            }
+        }
+
+        if ( -e "/dev/$CONFIG{'lvm'}/$hostname-disk" )
+        {
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would remove LVM disk volume /dev/$CONFIG{'lvm'}/$hostname-disk\n";
+            } else {
+                print "Removing LVM disk volume\n";
+                runCommand("lvremove /dev/$CONFIG{'lvm'}/$hostname-disk --force");
+            }
+        }
 
     }
-    elsif ( defined( $CONFIG{'evms'} ) )
+    elsif ( defined( $CONFIG{ 'evms' } ) )
     {
-       #
-       #  EVMS volumes
-       #
-       #
-       #  TODO: Check we're not mounted.
-       #
 
-       if ( -e "/dev/evms/$hostname-swap" )
-       {
-           print "Removing EVMS swap volume\n";
-           runCommand( "echo Delete : /dev/evms/$hostname-swap | evms" );
-           runCommand( "echo Delete : $CONFIG{'evms'}/$hostname-swap | evms" );
-       }
+        #
+        #  EVMS volumes
+        #
+        #
+        #  TODO: Check we're not mounted.
+        #
 
-       if ( -e "/dev/evms/$hostname-disk" )
-       {
-           print "Removing EVMS disk volume\n";
-           runCommand( "echo Delete : /dev/evms/$hostname-disk | evms" );
-           runCommand( "echo Delete : $CONFIG{'evms'}/$hostname-disk | evms" );
-       }
+        if ( -e "/dev/evms/$hostname-swap" )
+        {
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would remove EVMS swap volume: /dev/evms/$hostname-swap\n";
+                print "Would remove EVMS swap volume: $CONFIG{'evms'}/$hostname-swap\n";
+            } else {
+                print "Removing EVMS swap volume\n";
+                runCommand("echo Delete : /dev/evms/$hostname-swap | evms");
+                runCommand("echo Delete : $CONFIG{'evms'}/$hostname-swap | evms");
+            }
+        }
+
+        if ( -e "/dev/evms/$hostname-disk" )
+        {
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would remove EVMS disk volume: /dev/evms/$hostname-swap\n";
+                print "Would remove EVMS disk volume: $CONFIG{'evms'}/$hostname-swap\n";
+            } else {
+                print "Removing EVMS disk volume\n";
+                runCommand("echo Delete : /dev/evms/$hostname-disk | evms");
+                runCommand("echo Delete : $CONFIG{'evms'}/$hostname-disk | evms");
+            }
+        }
 
     }
     else
     {
-       print "Error:  No installation type specified\n";
-       print "Can't happen!\n";
-       print "Hostname : $hostname\n";
-       exit 127;
+        print "Error:  No installation type specified\n";
+        print "Can't happen!\n";
+        print "Hostname : $hostname\n";
+        exit 127;
     }
 }
 
@@ -584,26 +613,27 @@ sub deleteXenImage
 
 sub runCommand
 {
-    my ( $cmd ) = (@_ );
+    my ($cmd) = (@_);
 
     #
     #  Header.
     #
-    $CONFIG{'verbose'} && print "Executing : $cmd\n";
+    $CONFIG{ 'verbose' } && print "Executing : $cmd\n";
 
     #
     #  Hide output unless running with --debug.
     #
-    if ( $CONFIG{'verbose'} )
+    if ( $CONFIG{ 'verbose' } )
     {
-       #
-       #  Copy stderr to stdout, so we can see it.
-       #
-       $cmd .= " 2>&1";
+
+        #
+        #  Copy stderr to stdout, so we can see it.
+        #
+        $cmd .= " 2>&1";
     }
     else
     {
-       $cmd .= " >/dev/null 2>/dev/null" ;
+        $cmd .= " >/dev/null 2>/dev/null";
     }
 
 
@@ -614,19 +644,19 @@ sub runCommand
 
     if ( $? != 0 )
     {
-       print "Running command '$cmd' failed.\n";
-       print "Aborting\n";
-       exit;
+        print "Running command '$cmd' failed.\n";
+        print "Aborting\n";
+        exit;
     }
 
 
     #
     # All done.
     #
-    $CONFIG{'verbose'} && print "Output\n";
-    $CONFIG{'verbose'} && print "======\n";
-    $CONFIG{'verbose'} && print $output . "\n";
-    $CONFIG{'verbose'} && print "Finished : $cmd\n";
+    $CONFIG{ 'verbose' } && print "Output\n";
+    $CONFIG{ 'verbose' } && print "======\n";
+    $CONFIG{ 'verbose' } && print $output . "\n";
+    $CONFIG{ 'verbose' } && print "Finished : $cmd\n";
 
-    return( $output );
+    return ($output);
 }

bin/xen-list-images

@@ -58,18 +58,17 @@ Show the version number and exit.
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Stéphane Jourdois
 
 =cut
 
-
 =head1 LICENSE
 
-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -97,19 +96,19 @@ my %CONFIG;
 #
 #  Default prefix
 #
-$CONFIG{'prefix'} = "/etc/xen";
+$CONFIG{ 'prefix' } = "/etc/xen";
 
 #
 # Release number.
 #
-my $RELEASE = '3.9';
+my $RELEASE = '4.2';
 
 
 
 #
 #  Read the global configuration file if it exists.
 #
-readConfigurationFile( "/etc/xen-tools/xen-tools.conf" );
+readConfigurationFile("/etc/xen-tools/xen-tools.conf");
 
 
 #
@@ -129,11 +128,11 @@ my @instances = findXenInstances();
 #  Now process each instance.
 #
 my $count = 0;
-foreach my $instance ( @instances )
+foreach my $instance (@instances)
 {
-    if ( $count ) { print "\n"; }
+    if ($count) {print "\n";}
 
-    displayInstance( $instance );
+    displayInstance($instance);
     $count += 1;
 }
 
@@ -155,18 +154,18 @@ exit;
 
 sub readConfigurationFile
 {
-    my ($file) = ( @_ );
+    my ($file) = (@_);
 
     # Don't read the file if it doesn't exist.
-    return if ( ! -e $file );
+    return if ( !-e $file );
 
     open( FILE, "<", $file ) or die "Cannot read file '$file' - $!";
 
 
-    while (defined(my $line = <FILE>) )
+    while ( defined( my $line = <FILE> ) )
     {
         chomp $line;
-        if ($line =~ s/\\$//)
+        if ( $line =~ s/\\$// )
         {
             $line .= <FILE>;
             redo unless eof(FILE);
@@ -176,7 +175,7 @@ sub readConfigurationFile
         next if ( $line =~ /^([ \t]*)\#/ );
 
         # Skip blank lines
-        next if ( length( $line ) < 1 );
+        next if ( length($line) < 1 );
 
         # Strip trailing comments.
         if ( $line =~ /(.*)\#(.*)/ )
@@ -199,6 +198,7 @@ sub readConfigurationFile
             # command expansion?
             if ( $val =~ /(.*)`([^`]+)`(.*)/ )
             {
+
                 # store
                 my $pre  = $1;
                 my $cmd  = $2;
@@ -206,7 +206,7 @@ sub readConfigurationFile
 
                 # get output
                 my $output = `$cmd`;
-                chomp( $output );
+                chomp($output);
 
                 # build up replacement.
                 $val = $pre . $output . $post;
@@ -216,12 +216,11 @@ sub readConfigurationFile
             $CONFIG{ $key } = $val;
         }
     }
-    close( FILE );
+    close(FILE);
 }
 
 
 
-
 =begin doc
 
   Parse the arguments specified upon the command line.
@@ -234,24 +233,22 @@ sub parseCommandLineArguments
 {
     my $HELP    = 0;
     my $MANUAL  = 0;
-    my $VERSION        = 0;
+    my $VERSION = 0;
 
     #  Parse options.
     #
-    GetOptions(
-               "test=s",     \$CONFIG{'prefix'},
-               "help",       \$HELP,
-               "manual",     \$MANUAL,
-               "version",    \$VERSION
-             );
+    GetOptions( "test=s", \$CONFIG{ 'prefix' },
+                "help", \$HELP,
+                "manual", \$MANUAL,
+                "version", \$VERSION );
 
     pod2usage(1) if $HELP;
-    pod2usage(-verbose => 2 ) if $MANUAL;
+    pod2usage( -verbose => 2 ) if $MANUAL;
 
 
-    if ( $VERSION )
+    if ($VERSION)
     {
-        my $REVISION      = '$Revision: 1.30 $';
+        my $REVISION = '$Revision: 1.30 $';
         if ( $REVISION =~ /1.([0-9.]+) / )
         {
             $REVISION = $1;
@@ -277,12 +274,12 @@ sub findXenInstances
 {
     my @found;
 
-    foreach my $file ( sort( glob( $CONFIG{'prefix'} . "/*.cfg" ) ) )
+    foreach my $file ( sort( glob( $CONFIG{ 'prefix' } . "/*.cfg" ) ) )
     {
         push @found, $file if ( -e $file );
     }
 
-    return( @found );
+    return (@found);
 }
 
 
@@ -298,14 +295,14 @@ sub findXenInstances
 
 sub displayInstance
 {
-    my ( $file ) = ( @_ );
+    my ($file) = (@_);
 
     #
     #  Read each line.
     #
     open( FILY, "<", $file );
     my @LINES = <FILY>;
-    close( FILY );
+    close(FILY);
 
     #
     #  Is it dynamic?
@@ -316,7 +313,7 @@ sub displayInstance
     my $name = '';
     my $mem  = 0;
 
-    foreach my $line ( @LINES )
+    foreach my $line (@LINES)
     {
         if ( $line =~ /^\s*dhcp\s*=\s*"dhcp\"/i )
         {
@@ -342,7 +339,7 @@ sub displayInstance
 
     print "Name: $name\n";
     print "Memory: $mem\n";
-    print "IP: "  . $ip . $mac . "\n" if length( $ip );
+    print "IP: " . $ip . $mac . "\n" if length($ip);
     print "DHCP" . $mac . "\n" if $dhcp;
 }
 

bin/xen-resize-guest

@@ -76,18 +76,18 @@ Show the version number and exit.
 
 =cut
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
 
 =cut
 
 
 =head1 LICENSE
 
-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -107,8 +107,6 @@ use Text::Template;
 
 
 
-
-
 #
 #  Configuration values read from the command line, or configuration file.
 #
@@ -118,14 +116,14 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '3.9';
+my $RELEASE = '4.2';
 
 
 
 #
 #  Read the global configuration file.
 #
-readConfigurationFile( "/etc/xen-tools/xen-tools.conf" );
+readConfigurationFile("/etc/xen-tools/xen-tools.conf");
 
 
 #
@@ -145,13 +143,15 @@ testArguments();
 #
 my $path = undef;
 
-if ( $CONFIG{'dir'} )
+if ( $CONFIG{ 'dir' } )
 {
+
     #
     #  Make sure we can find the disk
     #
-    $path = $CONFIG{'dir'} . "/domains/" . $CONFIG{'hostname'} . "/disk.img";
-    if ( ! -e $path )
+    $path =
+      $CONFIG{ 'dir' } . "/domains/" . $CONFIG{ 'hostname' } . "/disk.img";
+    if ( !-e $path )
     {
         print <<EOF;
 
@@ -188,7 +188,7 @@ EOF
     #
     #  Allow panic
     #
-    if ( !$CONFIG{'force'} )
+    if ( !$CONFIG{ 'force' } )
     {
         foreach my $i ( 1 .. 10 )
         {
@@ -201,15 +201,16 @@ EOF
     print "DO NOT INTERRUPT\n";
 
     my $cmd = "dd if=/dev/zero bs=1M count=$CONFIG{'add'}k >> $path";
-    system( $cmd );
+    system($cmd );
 }
-elsif ( $CONFIG{'lvm'} )
+elsif ( $CONFIG{ 'lvm' } )
 {
+
     #
     #  Make sure we can find the disk
     #
-    $path = "/dev/" . $CONFIG{'lvm'} . "/" . $CONFIG{'hostname'} . "-disk";
-    if ( ! -e $path )
+    $path = "/dev/" . $CONFIG{ 'lvm' } . "/" . $CONFIG{ 'hostname' } . "-disk";
+    if ( !-e $path )
     {
         print <<EOF;
 
@@ -246,7 +247,7 @@ EOF
     #
     #  Allow panic
     #
-    if ( !$CONFIG{'force'} )
+    if ( !$CONFIG{ 'force' } )
     {
         foreach my $i ( 1 .. 10 )
         {
@@ -258,7 +259,7 @@ EOF
 
     print "DO NOT INTERRUPT\n";
     my $cmd = "lvextend -L+$CONFIG{'add'}M $path";
-    system( $cmd );
+    system($cmd );
 }
 else
 {
@@ -271,13 +272,13 @@ else
 #  Check filesystem.
 #
 print "Checking filesystem\n";
-system( "fsck.ext3 -f $path" );
+system("fsck.ext3 -f $path");
 
 #
 #  Run ext3resize.
 #
 print "Resizing in place\n";
-system( "resize2fs $path" );
+system("resize2fs $path");
 
 
 #
@@ -298,16 +299,19 @@ exit 0;
 
 sub readConfigurationFile
 {
-    my ($file) = ( @_ );
+    my ($file) = (@_);
+
+    # Don't read the file if it doesn't exist.
+    return if ( !-e $file );
 
     open( FILE, "<", $file ) or die "Cannot read file '$file' - $!";
 
-    my $line       = "";
+    my $line = "";
 
-    while (defined($line = <FILE>) )
+    while ( defined( $line = <FILE> ) )
     {
         chomp $line;
-        if ($line =~ s/\\$//)
+        if ( $line =~ s/\\$// )
         {
             $line .= <FILE>;
             redo unless eof(FILE);
@@ -317,7 +321,7 @@ sub readConfigurationFile
         next if ( $line =~ /^([ \t]*)\#/ );
 
         # Skip blank lines
-        next if ( length( $line ) < 1 );
+        next if ( length($line) < 1 );
 
         # Strip trailing comments.
         if ( $line =~ /(.*)\#(.*)/ )
@@ -340,6 +344,7 @@ sub readConfigurationFile
             # command expansion?
             if ( $val =~ /(.*)`([^`]+)`(.*)/ )
             {
+
                 # store
                 my $pre  = $1;
                 my $cmd  = $2;
@@ -347,7 +352,7 @@ sub readConfigurationFile
 
                 # get output
                 my $output = `$cmd`;
-                chomp( $output );
+                chomp($output);
 
                 # build up replacement.
                 $val = $pre . $output . $post;
@@ -358,7 +363,7 @@ sub readConfigurationFile
         }
     }
 
-    close( FILE );
+    close(FILE);
 }
 
 
@@ -387,27 +392,27 @@ sub parseCommandLineArguments
     #
     GetOptions(
 
-               # Misc. options
-               "add=s",        \$CONFIG{'add'},
-               "dir=s",        \$install{'dir'},
-               "lvm=s",        \$install{'lvm'},
-               "hostname=s",   \$CONFIG{'hostname'},
-               "force",        \$CONFIG{'force'},
+        # Misc. options
+        "add=s",      \$CONFIG{ 'add' },
+        "dir=s",      \$install{ 'dir' },
+        "lvm=s",      \$install{ 'lvm' },
+        "hostname=s", \$CONFIG{ 'hostname' },
+        "force",      \$CONFIG{ 'force' },
 
-               # Help options
-               "help",         \$HELP,
-               "manual",       \$MANUAL,
-               "verbose",      \$CONFIG{'verbose'},
-               "version",      \$VERSION
-              );
+        # Help options
+        "help",    \$HELP,
+        "manual",  \$MANUAL,
+        "verbose", \$CONFIG{ 'verbose' },
+        "version", \$VERSION
+    );
 
     pod2usage(1) if $HELP;
-    pod2usage(-verbose => 2 ) if $MANUAL;
+    pod2usage( -verbose => 2 ) if $MANUAL;
 
 
-    if ( $VERSION )
+    if ($VERSION)
     {
-        print( "xen-resize-guest release $RELEASE\n" );
+        print("xen-resize-guest release $RELEASE\n");
         exit 1;
     }
 
@@ -416,17 +421,17 @@ sub parseCommandLineArguments
     # they will allow the configuration values to be overriden by
     # the command line.
     #
-    if ( $install{'lvm'} )
+    if ( $install{ 'lvm' } )
     {
-        $CONFIG{'lvm'} = $install{'lvm'};
-        $CONFIG{'dir'} = undef;
-        delete $CONFIG{'dir'};
+        $CONFIG{ 'lvm' } = $install{ 'lvm' };
+        $CONFIG{ 'dir' } = undef;
+        delete $CONFIG{ 'dir' };
     }
-    if ( $install{'dir'} )
+    if ( $install{ 'dir' } )
     {
-        $CONFIG{'dir'} = $install{'dir'};
-        $CONFIG{'lvm'} = undef;
-        delete $CONFIG{'lvm'};
+        $CONFIG{ 'dir' } = $install{ 'dir' };
+        $CONFIG{ 'lvm' } = undef;
+        delete $CONFIG{ 'lvm' };
     }
 }
 
@@ -442,10 +447,11 @@ sub parseCommandLineArguments
 
 sub testArguments
 {
+
     #
     #  Make sure we received a hostname.
     #
-    if ( !$CONFIG{'hostname'} )
+    if ( !$CONFIG{ 'hostname' } )
     {
         print <<EOF;
 
@@ -460,7 +466,7 @@ EOF
     #
     #  Make sure we received a size.
     #
-    if ( !$CONFIG{'add'} )
+    if ( !$CONFIG{ 'add' } )
     {
         print <<EOF;
 
@@ -476,7 +482,7 @@ EOF
     #
     #  Make sure the guest isn't running
     #
-    if ( xenRunning( $CONFIG{'hostname'} ) )
+    if ( xenRunning( $CONFIG{ 'hostname' } ) )
     {
         print "The guest $CONFIG{'hostname'} appears to be running!\n";
         exit 1;
@@ -486,8 +492,10 @@ EOF
     #  We should either have LVM *or* directory - not neither or both.
     #
     my $options = 0;
-    $options += 1if ( defined($CONFIG{'lvm'}) && length( $CONFIG{'lvm'} ) );
-    $options += 1if ( defined($CONFIG{'dir'}) && length( $CONFIG{'dir'} ) );
+    $options += 1
+      if ( defined( $CONFIG{ 'lvm' } ) && length( $CONFIG{ 'lvm' } ) );
+    $options += 1
+      if ( defined( $CONFIG{ 'dir' } ) && length( $CONFIG{ 'dir' } ) );
 
     #
     #  Report
@@ -506,13 +514,13 @@ EOF
     #
     #  Convert from Gb -> Mb;
     #
-    if ( $CONFIG{'add'} =~ /^([0-9.]+)Gb*$/i )
+    if ( $CONFIG{ 'add' } =~ /^([0-9.]+)Gb*$/i )
     {
-        $CONFIG{'add'} = $1 * 1024;
+        $CONFIG{ 'add' } = $1 * 1024;
     }
-    if ( $CONFIG{'add'} =~ /^([0-9.]+)Mb*$/i )
+    if ( $CONFIG{ 'add' } =~ /^([0-9.]+)Mb*$/i )
     {
-        $CONFIG{'add'} = $1;
+        $CONFIG{ 'add' } = $1;
     }
 }
 
@@ -528,18 +536,18 @@ EOF
 
 sub xenRunning
 {
-    my( $hostname ) =  (@_ );
+    my ($hostname) = (@_);
 
     my $running = 0;
 
-    open( CMD, "xm list $hostname 2>/dev/null |")
-      or die "Failed to run 'xm list $hostname'";
-    while( <CMD> )
+    open( CMD, "xm list $hostname 2>/dev/null |" ) or
+      die "Failed to run 'xm list $hostname'";
+    while (<CMD>)
     {
         my $line = $_;
-        $running = 1 if ( $line =~ /\Q$hostname\E/ )
+        $running = 1 if ( $line =~ /\Q$hostname\E/ );
     }
-    close( CMD );
+    close(CMD);
 
-    return( $running );
+    return ($running);
 }

bin/xen-update-image

@@ -80,19 +80,18 @@ Show the version number and exit.
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
-
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
 
 =cut
 
-
 =head1 LICENSE
 
-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -105,6 +104,7 @@ The LICENSE file contains the full text of the license.
 use strict;
 use English;
 use File::Temp qw/ tempdir /;
+use File::Copy qw/ mv cp /;
 use Getopt::Long;
 use Pod::Usage;
 
@@ -120,7 +120,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '3.9';
+my $RELEASE = '4.2';
 
 
 #
@@ -128,7 +128,7 @@ my $RELEASE = '3.9';
 #
 if ( -e "/etc/xen-tools/xen-tools.conf" )
 {
-    readConfigurationFile( "/etc/xen-tools/xen-tools.conf" );
+    readConfigurationFile("/etc/xen-tools/xen-tools.conf");
 }
 
 
@@ -166,11 +166,11 @@ E_O_ROOT
 #
 #  Loop over the supplied arguments, and attempt to update each image.
 #
-while( my $name = shift )
+while ( my $name = shift )
 {
-    if ( !xenRunning( $name ) )
+    if ( !xenRunning($name) )
     {
-        updateXenImage( $name );
+        updateXenImage($name);
     }
     else
     {
@@ -196,7 +196,7 @@ exit;
 
 sub updateXenImage
 {
-    my ( $name ) = ( @_ );
+    my ($name) = (@_);
 
     #
     #  Create a temporary directory, and prepare to mount the
@@ -210,12 +210,13 @@ sub updateXenImage
     #  If we're dealing with loopback images find the main one,
     # and mount it.
     #
-    if ( $CONFIG{'dir'} )
+    if ( $CONFIG{ 'dir' } )
     {
-        # The loopback image.
-        $img =  $CONFIG{'dir'} . "/domains/" . $name . "/disk.img";
 
-        if ( ! -e $img )
+        # The loopback image.
+        $img = $CONFIG{ 'dir' } . "/domains/" . $name . "/disk.img";
+
+        if ( !-e $img )
         {
             print "Disk image '$img' for host '$name' not found\n";
             return;
@@ -223,13 +224,14 @@ sub updateXenImage
 
         $mount_cmd = "mount -t auto -o loop $img $tmp";
     }
-    elsif ( $CONFIG{'lvm'} )
+    elsif ( $CONFIG{ 'lvm' } )
     {
+
         # The LVM volume
-        $img = "/dev/" . $CONFIG{'lvm'} . "/$name-disk";
+        $img = "/dev/" . $CONFIG{ 'lvm' } . "/$name-disk";
 
         # make sure it exists.
-        if ( ! -e $img )
+        if ( !-e $img )
         {
             print "Logical volume '$img' for host '$name' not found\n";
             return;
@@ -237,25 +239,31 @@ sub updateXenImage
 
         $mount_cmd = "mount -t auto $img $tmp";
     }
-    elsif ( $CONFIG{'evms'} )
+    elsif ( $CONFIG{ 'evms' } )
     {
-        # The EVMS volume  -- note, unlike LVM, you don't need the $CONFIG{'evms'}
-        # to see it and mount the volume. $CONFIG{'evms'} is only used for manipulating
-        # the underlying object.  Still, I don't want to mess with the parse code and
-        # make it confusing - otherwise --evms takes an argument everywhere but here,
-        # which will confuse users.  The better solution is to make it so that --evms can
-        # take a following container, but doesn't require it.  For the moment, it is
-        # better to leave it as it is, take a container, and then ignore it.
 
-        # The best way to do it is to just read it out of the configuration file,
-        # tell the user what you got and where you got it from, and not bother the user
-        # with picking --dir or --lvm or --evms at all, but infer it from the config
-        # file's disk = parameter.  xen-delete-image might work the same way, but
-        # it could be *slightly* more dangerous in the context of deleting.
+        # The EVMS volume -- note, unlike LVM, you don't need the
+        # $CONFIG{'evms'} to see it and mount the
+        # volume. $CONFIG{'evms'} is only used for manipulating the
+        # underlying object.  Still, I don't want to mess with the
+        # parse code and make it confusing - otherwise --evms takes an
+        # argument everywhere but here, which will confuse users.  The
+        # better solution is to make it so that --evms can take a
+        # following container, but doesn't require it.  For the
+        # moment, it is better to leave it as it is, take a container,
+        # and then ignore it.
+
+        # The best way to do it is to just read it out of the
+        # configuration file, tell the user what you got and where you
+        # got it from, and not bother the user with picking --dir or
+        # --lvm or --evms at all, but infer it from the config file's
+        # disk = parameter.  xen-delete-image might work the same way,
+        # but it could be *slightly* more dangerous in the context of
+        # deleting.
         $img = "/dev/evms/$name-disk";
 
         # make sure it exists.
-        if ( ! -e $img )
+        if ( !-e $img )
         {
             print "EVMS volume '$img' for host '$name' not found\n";
             return;
@@ -279,20 +287,37 @@ sub updateXenImage
     if ( ( -e $tmp . "/usr/bin/apt-get" ) &&
          ( -x $tmp . "/usr/bin/apt-get" ) )
     {
-       #
-       #  Now run the update command.
-       #
-       system( "chroot $tmp /usr/bin/apt-get update" );
+        #
+        #  Copy dom0's resolv.conf to domU
+        #
+        mv("$tmp/etc/resolv.conf", "$tmp/etc/resolv.conf.old") if -f "$tmp/etc/resolv.conf";
+        cp("/etc/resolv.conf", "$tmp/etc/resolv.conf");
+
+        #
+        #  Now run the update command.
+        #
+        system("chroot $tmp /usr/bin/apt-get update");
 
 
-       #
-       #  Now upgrade
-       #
-       system( "DEBIAN_FRONTEND=noninteractive  chroot $tmp /usr/bin/apt-get upgrade --yes --force-yes" );
+        #
+        #  Now upgrade
+        #
+        system(
+            "DEBIAN_FRONTEND=noninteractive  chroot $tmp /usr/bin/apt-get upgrade --yes --force-yes"
+        );
+
+        #
+        #  Restore domU's resolv.conf if needed
+        #
+        if (-f "$tmp/etc/resolv.conf") {
+            mv("$tmp/etc/resolv.conf.old", "$tmp/etc/resolv.conf");
+        } else {
+            unlink "$tmp/etc/resolv.conf";
+        }
     }
     else
     {
-       print "Xen image $name is not a Debian GNU/Linux image.  Skipping\n";
+        print "Xen image $name is not a Debian GNU/Linux image.  Skipping\n";
     }
 
 
@@ -306,8 +331,6 @@ sub updateXenImage
 
 
 
-
-
 =begin doc
 
   Test to see if the given instance is running.
@@ -318,25 +341,24 @@ sub updateXenImage
 
 sub xenRunning
 {
-    my( $hostname ) =  (@_ );
+    my ($hostname) = (@_);
 
     my $running = 0;
 
-    open( CMD, "xm list 2>/dev/null |")
-      or die "Failed to run 'xm list $hostname'";
-    while( <CMD> )
+    open( CMD, "xm list 2>/dev/null |" ) or
+      die "Failed to run 'xm list $hostname'";
+    while (<CMD>)
     {
         my $line = $_;
-        $running = 1 if ( $line =~ /\Q$hostname\E/ )
+        $running = 1 if ( $line =~ /\Q$hostname\E/ );
     }
-    close( CMD );
+    close(CMD);
 
-    return( $running );
+    return ($running);
 }
 
 
 
-
 =begin doc
 
   Read the configuration file specified.
@@ -347,16 +369,16 @@ sub xenRunning
 
 sub readConfigurationFile
 {
-    my ($file) = ( @_ );
+    my ($file) = (@_);
 
     open( FILE, "<", $file ) or die "Cannot read file '$file' - $!";
 
-    my $line       = "";
+    my $line = "";
 
-    while (defined($line = <FILE>) )
+    while ( defined( $line = <FILE> ) )
     {
         chomp $line;
-        if ($line =~ s/\\$//)
+        if ( $line =~ s/\\$// )
         {
             $line .= <FILE>;
             redo unless eof(FILE);
@@ -366,7 +388,7 @@ sub readConfigurationFile
         next if ( $line =~ /^([ \t]*)\#/ );
 
         # Skip blank lines
-        next if ( length( $line ) < 1 );
+        next if ( length($line) < 1 );
 
         # Strip trailing comments.
         if ( $line =~ /(.*)\#(.*)/ )
@@ -389,6 +411,7 @@ sub readConfigurationFile
             # command expansion?
             if ( $val =~ /(.*)`([^`]+)`(.*)/ )
             {
+
                 # store
                 my $pre  = $1;
                 my $cmd  = $2;
@@ -396,7 +419,7 @@ sub readConfigurationFile
 
                 # get output
                 my $output = `$cmd`;
-                chomp( $output );
+                chomp($output);
 
                 # build up replacement.
                 $val = $pre . $output . $post;
@@ -407,12 +430,11 @@ sub readConfigurationFile
         }
     }
 
-    close( FILE );
+    close(FILE);
 }
 
 
 
-
 =begin doc
 
   Parse the arguments specified upon the command line.
@@ -429,21 +451,19 @@ sub parseCommandLineArguments
 
     #  Parse options.
     #
-    GetOptions(
-              "dir=s",      \$CONFIG{'dir'},
-              "lvm=s",      \$CONFIG{'lvm'},
-              "evms=s",     \$CONFIG{'evms'},
-              "help",       \$HELP,
-              "manual",     \$MANUAL,
-              "version",    \$VERSION
-             );
+    GetOptions( "dir=s",  \$CONFIG{ 'dir' },
+                "lvm=s",   \$CONFIG{ 'lvm' },
+                "evms=s", \$CONFIG{ 'evms' },
+                "help",    \$HELP,
+                "manual", \$MANUAL,
+                "version", \$VERSION );
 
     pod2usage(1) if $HELP;
-    pod2usage(-verbose => 2 ) if $MANUAL;
+    pod2usage( -verbose => 2 ) if $MANUAL;
 
-    if ( $VERSION )
+    if ($VERSION)
     {
-        my $REVISION      = '$Revision: 1.29 $';
+        my $REVISION = '$Revision: 1.29 $';
 
         if ( $REVISION =~ /1.([0-9.]+) / )
         {
@@ -468,13 +488,14 @@ sub parseCommandLineArguments
 
 sub checkArguments
 {
+
     #
     #  Make sure we got one and only one installation method.
     #
     my $count = 0;
-    foreach my $type ( qw/dir lvm evms/ )
+    foreach my $type (qw/dir lvm evms/)
     {
-        $count += 1 if defined( $CONFIG{$type} );
+        $count += 1 if defined( $CONFIG{ $type } );
     }
 
     #
@@ -483,10 +504,10 @@ sub checkArguments
     #
     if ( $count != 1 )
     {
-       print "Please select one and only one of the installation methods:\n";
-       print " --dir\n";
-       print " --evms\n";
-       print " --lvm\n";
-       exit;
+        print "Please select one and only one of the installation methods:\n";
+        print " --dir\n";
+        print " --evms\n";
+        print " --lvm\n";
+        exit;
     }
 }

bin/xt-create-xen-config

@@ -104,19 +104,18 @@ xt-create-config - Create a Xen configuration file for a new guest
 
 =cut
 
+=head1 AUTHORS
 
-=head1 AUTHOR
-
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
 
 =cut
 
-
 =head1 LICENSE
 
-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -150,14 +149,14 @@ my @PARTITIONS = undef;
 #
 #  Default options
 #
-$CONFIG{'template'} = '/etc/xen-tools/xm.tmpl';
+$CONFIG{ 'template' } = '/etc/xen-tools/xm.tmpl';
+$CONFIG{ 'extension' } = '.cfg';
 
 
 #
 # Release number.
 #
-my $RELEASE = '3.9';
-
+my $RELEASE = '4.2';
 
 
 
@@ -176,7 +175,7 @@ checkArguments();
 #
 #  If we've been given any administrators then set them up.
 #
-if ( $ENV{'admins'} )
+if ( $ENV{ 'admins' } )
 {
     setupAdminUsers();
 }
@@ -189,9 +188,6 @@ createXenConfig();
 
 
 
-
-
-
 #
 #  Exit cleanly - any errors which have already occurred will result
 # in "exit 1".
@@ -200,9 +196,6 @@ exit 0;
 
 
 
-
-
-
 =begin doc
 
   Parse the command line arguments this script was given.
@@ -220,24 +213,23 @@ sub parseCommandLineArguments
     #
     #  Parse options.
     #
-    GetOptions(
-               "admins=s",   \$ENV{'admins'},
-               "output=s",   \$CONFIG{'output'},
-               "extension=s",\$CONFIG{'extension'},
-               "template=s", \$CONFIG{'template'},
-               "verbose",    \$CONFIG{'verbose'},
-               "help",       \$HELP,
-               "manual",     \$MANUAL,
-               "version",    \$VERSION
+    GetOptions( "admins=s",    \$ENV{ 'admins' },
+                "output=s",    \$CONFIG{ 'output' },
+                "extension=s", \$CONFIG{ 'extension' },
+                "template=s",  \$CONFIG{ 'template' },
+                "verbose",     \$CONFIG{ 'verbose' },
+                "help",        \$HELP,
+                "manual",      \$MANUAL,
+                "version",     \$VERSION
               );
 
     pod2usage(1) if $HELP;
-    pod2usage(-verbose => 2 ) if $MANUAL;
+    pod2usage( -verbose => 2 ) if $MANUAL;
 
 
-    if ( $VERSION )
+    if ($VERSION)
     {
-        my $REVISION      = '$Revision: 1.47 $';
+        my $REVISION = '$Revision: 1.47 $';
         if ( $REVISION =~ /1.([0-9.]+) / )
         {
             $REVISION = $1;
@@ -260,10 +252,11 @@ sub parseCommandLineArguments
 
 sub checkArguments
 {
+
     #
     #  We require an output location.
     #
-    if ( ! defined( $CONFIG{'output'} ) )
+    if ( !defined( $CONFIG{ 'output' } ) )
     {
         print "The '--output' argument is mandatory\n";
         exit 1;
@@ -272,9 +265,10 @@ sub checkArguments
     #
     #  The output location should be a directory which exists.
     #
-    if ( ! -d $CONFIG{'output'} )
+    if ( !-d $CONFIG{ 'output' } )
     {
-        print "The output directory we've been given, $CONFIG{'output'}, doesnt exist\n";
+        print
+          "The output directory we've been given, $CONFIG{'output'}, doesnt exist\n";
         print "Aborting\n";
         exit 1;
     }
@@ -282,11 +276,12 @@ sub checkArguments
     #
     #  Make sure that any specified template file exists.
     #
-    if ( defined( $CONFIG{'template'} ) )
+    if ( defined( $CONFIG{ 'template' } ) )
     {
-        if ( ! -e $CONFIG{'template'} )
+        if ( !-e $CONFIG{ 'template' } )
         {
-            print "The specified template file, $CONFIG{'template'} does not exist.\n";
+            print
+              "The specified template file, $CONFIG{'template'} does not exist.\n";
             exit 1;
         }
     }
@@ -310,20 +305,18 @@ sub importPartitionsFromEnvironment
 {
     @PARTITIONS = ();
 
-    for (my $i=1; $i <= $ENV{'NUMPARTITIONS'}; $i++)
+    return unless exists $ENV{ 'NUMPARTITIONS' };
+    for ( my $i = 1 ; $i <= $ENV{ 'NUMPARTITIONS' } ; $i++ )
     {
-        my @parts = split(/:/, $ENV{'PARTITION' . $i}, 7);
+        my @parts = split( /:/, $ENV{ 'PARTITION' . $i }, 7 );
         push( @PARTITIONS,
-            {
-                'name'       => $parts[0],
-                'size'       => $parts[1],
-                'type'       => $parts[2],
-                'mountpoint' => $parts[3],
-                'options'    => $parts[4],
-                'imagetype'  => $parts[5],
-                'image'      => $parts[6]
-            }
-        );
+              {  'name'       => $parts[0],
+                 'size'       => $parts[1],
+                 'type'       => $parts[2],
+                 'mountpoint' => $parts[3],
+                 'options'    => $parts[4],
+                 'imagetype'  => $parts[5],
+                 'image'      => $parts[6] } );
     }
 }
 
@@ -344,26 +337,31 @@ sub createXenConfig
     #
     #  The output file we're going to process.
     #
-    my $file = $CONFIG{'output'} . '/' . $ENV{'hostname'} . $ENV{'extension'};
+    my $file =
+      $CONFIG{ 'output' } . '/' . $ENV{ 'hostname' } . $CONFIG{ 'extension' };
 
     #
     #  The template we're going to read from.
     #
     my $template = new Text::Template( TYPE   => 'FILE',
-                                       SOURCE => $CONFIG{'template'} );
+                                       SOURCE => $CONFIG{ 'template' } );
 
 
     #
     #  The device we're using.
     #
-    my $device = 'sda';
-    if ( defined( $ENV{'ide'} ) )
+    my $device = 'xvda';
+    if ( defined( $ENV{ 'ide' } ) )
     {
         $device = 'hda';
     }
-    elsif ( defined( $ENV{'disk_device'} ) )
+    elsif ( defined( $ENV{ 'scsi' } ) )
     {
-        $device = $ENV{'disk_device'};
+        $device = 'sda';
+    }
+    elsif ( defined( $ENV{ 'disk_device' } ) )
+    {
+        $device = $ENV{ 'disk_device' };
 
         # strip /dev/, if present.
         if ( $device =~ /^(.*)\/(.*)$/ )
@@ -371,65 +369,65 @@ sub createXenConfig
             $device = $2;
         }
     }
-    $ENV{'device'} = $device;
+    $ENV{ 'device' } = $device;
 
 
     #
     #  The memory size:  Convert Gb -> Mb.
     #
-    if ( $ENV{'memory'} =~ /^(\d+)Gb*$/i )
+    if ( $ENV{ 'memory' } =~ /^(\d+)Gb*$/i )
     {
-        $ENV{'memory'} = $1 * 1024;
+        $ENV{ 'memory' } = $1 * 1024;
     }
 
     #
     #  Remove any trailing Mb.
     #
-    if ( $ENV{'memory'} =~ /^(\d+)Mb*$/i )
+    if ( $ENV{ 'memory' } =~ /^(\d+)Mb*$/i )
     {
-        $ENV{'memory'} = $1;
+        $ENV{ 'memory' } = $1;
     }
 
 
     #
     # Images as presented to Xen - either loopback images, or LVM partitions.
     #
-    if ( $ENV{'lvm'} )
+    if ( $ENV{ 'lvm' } )
     {
-        $ENV{'image_prefix'} = "phy:$ENV{'lvm'}/$ENV{'hostname'}-";
-        $ENV{'image_suffix'} = '';
+        $ENV{ 'image_prefix' } = "phy:$ENV{'lvm'}/$ENV{'hostname'}-";
+        $ENV{ 'image_suffix' } = '';
         importPartitionsFromEnvironment();
     }
-    elsif ( $ENV{'evms'} )
+    elsif ( $ENV{ 'evms' } )
     {
-        $ENV{'image_prefix'} = "phy:/dev/evms/$ENV{'hostname'}-";
-        $ENV{'image_suffix'} = '';
+        $ENV{ 'image_prefix' } = "phy:/dev/evms/$ENV{'hostname'}-";
+        $ENV{ 'image_suffix' } = '';
         importPartitionsFromEnvironment();
     }
-    elsif ( $ENV{'image-dev'} )
+    elsif ( $ENV{ 'image-dev' } )
     {
-        $ENV{'image_vbd'} = "phy:$ENV{'image-dev'}";
+        $ENV{ 'image_vbd' } = "phy:$ENV{'image-dev'}";
 
-        if ( $ENV{'swap-dev'} )
+        if ( $ENV{ 'swap-dev' } )
         {
-            $ENV{'swap_vbd'} = "phy:$ENV{'swap-dev'}";
+            $ENV{ 'swap_vbd' } = "phy:$ENV{'swap-dev'}";
         }
         else
         {
-            $ENV{'swap_vbd'}  = undef;
+            $ENV{ 'swap_vbd' } = undef;
         }
     }
     else
     {
-        $ENV{'image_prefix'} = "file:$ENV{'dir'}/domains/$ENV{'hostname'}/";
-        $ENV{'image_suffix'} = '.img';
+        $ENV{ 'image_prefix' } = "file:$ENV{'dir'}/domains/$ENV{'hostname'}/";
+        $ENV{ 'image_suffix' } = '.img';
         importPartitionsFromEnvironment();
     }
 
     #
     # The xen-tools version.
     #
-    $ENV{'xen_tools_version'} = $RELEASE;
+    $ENV{ 'xen_tools_version' } = $RELEASE;
 
 
     #
@@ -438,11 +436,11 @@ sub createXenConfig
     # made available to our template file.
     #
     my %vars;
-    foreach my $key (sort keys %ENV )
+    foreach my $key ( sort keys %ENV )
     {
-        $vars{$key} = $ENV{$key};
+        $vars{ $key } = $ENV{ $key };
     }
-    $vars{'PARTITIONS'} = \@PARTITIONS;
+    $vars{ 'PARTITIONS' } = \@PARTITIONS;
 
     #
     #  Now output the data.
@@ -457,9 +455,9 @@ sub createXenConfig
     #
     #  Write the output of processing the template file, if it succeeds.
     #
-    if (defined $result)
+    if ( defined $result )
     {
-        print FILE $result ;
+        print FILE $result;
     }
     else
     {
@@ -469,13 +467,12 @@ sub createXenConfig
     #
     #  Close the output file.
     #
-    close( FILE );
+    close(FILE);
 
 }
 
 
 
-
 =begin doc
 
   This routine is designed to ensure that any users specified with
@@ -487,6 +484,7 @@ sub createXenConfig
 
 sub setupAdminUsers
 {
+
     #
     #  If we're not root we can't modify users.
     #
@@ -495,24 +493,26 @@ sub setupAdminUsers
     #
     #  If we don't have a sudoers file then we'll also ignore this.
     #
-    return if ( ! -e "/etc/sudoers" );
+    return if ( !-e "/etc/sudoers" );
 
     #
     #  Find the path to the xen-login-shell
     #
     my $shell = undef;
     $shell = "/usr/bin/xen-login-shell" if ( -x "/usr/bin/xen-login-shell" );
-    $shell = "/usr/local/bin/xen-login-shell" if ( -x "/usr/bin/local/xen-login-shell" );
+    $shell = "/usr/local/bin/xen-login-shell"
+      if ( -x "/usr/bin/local/xen-login-shell" );
 
-    return if ( !defined( $shell ) );
+    return if ( !defined($shell) );
 
 
     #
     #  For each user make sure they exist, and setup the
     # login shell for them.
     #
-    foreach my $user ( split( /,/, $ENV{'admins'} ) )
+    foreach my $user ( split( /,/, $ENV{ 'admins' } ) )
     {
+
         # Strip leading and trailing whitespace.
         $user =~ s/^\s+//;
         $user =~ s/\s+$//;
@@ -523,23 +523,27 @@ sub setupAdminUsers
         # Does the user exist?
         if ( getpwnam($user) )
         {
+
             # Change shell.
-            $CONFIG{'verbose'} && print "Changing shell for $user: $shell\n";
+            $CONFIG{ 'verbose' } && print "Changing shell for $user: $shell\n";
             system( "chsh", "-s", $shell, $user );
         }
         else
         {
+
             # Add a new user.
-            $CONFIG{'verbose'} && print "Adding new user: $user\n";
+            $CONFIG{ 'verbose' } && print "Adding new user: $user\n";
             system( "useradd", "-s", $shell, $user );
         }
 
         #
         #  Add the entry to /etc/sudoers.
         #
-        open( SUDOERS, ">>", "/etc/sudoers" ) or warn "Failed to add user to sudoers file : $user - $!";
-        print SUDOERS "$user ALL = NOPASSWD: /usr/sbin/xm, /usr/bin/xen-create-image\n";
-        close( SUDOERS );
+        open( SUDOERS, ">>", "/etc/sudoers" ) or
+          warn "Failed to add user to sudoers file : $user - $!";
+        print SUDOERS
+          "$user ALL = NOPASSWD: /usr/sbin/xm, /usr/bin/xen-create-image\n";
+        close(SUDOERS);
 
     }
 }

bin/xt-customize-image

@@ -60,18 +60,19 @@ xt-customize-image - Customize a freshly installed copy of GNU/Linux
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
 
 =cut
 
 
 =head1 LICENSE
 
-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -97,8 +98,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '3.9';
-
+my $RELEASE = '4.2';
 
 
 
@@ -128,9 +128,6 @@ exit 0;
 
 
 
-
-
-
 =begin doc
 
   Parse the command line arguments this script was given.
@@ -148,29 +145,28 @@ sub parseCommandLineArguments
     #
     #  Parse options.
     #
-    GetOptions(
-               "location=s", \$CONFIG{'location'},
-               "dist=s",     \$CONFIG{'dist'},
-               "verbose",    \$CONFIG{'verbose'},
-               "help",       \$HELP,
-               "manual",     \$MANUAL,
-               "version",    \$VERSION
-             );
+    GetOptions( "location=s", \$CONFIG{ 'location' },
+                "dist=s",     \$CONFIG{ 'dist' },
+                "verbose",    \$CONFIG{ 'verbose' },
+                "help",       \$HELP,
+                "manual",     \$MANUAL,
+                "version",    \$VERSION
+              );
 
     pod2usage(1) if $HELP;
-    pod2usage(-verbose => 2 ) if $MANUAL;
+    pod2usage( -verbose => 2 ) if $MANUAL;
 
 
-    if ( $VERSION )
+    if ($VERSION)
     {
-       my $REVISION      = '$Revision: 1.33 $';
-       if ( $REVISION =~ /1.([0-9.]+) / )
-       {
-           $REVISION = $1;
-       }
+        my $REVISION = '$Revision: 1.33 $';
+        if ( $REVISION =~ /1.([0-9.]+) / )
+        {
+            $REVISION = $1;
+        }
 
-       print "xt-customize-image release $RELEASE - CVS: $REVISION\n";
-       exit;
+        print "xt-customize-image release $RELEASE - CVS: $REVISION\n";
+        exit;
     }
 }
 
@@ -186,10 +182,11 @@ sub parseCommandLineArguments
 
 sub checkArguments
 {
+
     #
     #  We require a location.
     #
-    if ( ! defined( $CONFIG{'location'} ) )
+    if ( !defined( $CONFIG{ 'location' } ) )
     {
         print "The '--location' argument is mandatory\n";
         exit 1;
@@ -199,7 +196,7 @@ sub checkArguments
     #
     #  Test that the location we've been given exists
     #
-    if ( ! -d $CONFIG{'location'} )
+    if ( !-d $CONFIG{ 'location' } )
     {
         print "The installation directory we've been given doesn't exist\n";
         print "We tried to use : $CONFIG{'location'}\n";
@@ -210,7 +207,7 @@ sub checkArguments
     #
     #  We require a distribution name.
     #
-    if ( ! defined( $CONFIG{'dist'} ) )
+    if ( !defined( $CONFIG{ 'dist' } ) )
     {
         print "The '--dist' argument is mandatory\n";
         exit 1;
@@ -224,18 +221,18 @@ sub checkArguments
     #  If there are no scripts then we clearly cannot
     # customise it!
     #
-    my $dir = "/usr/lib/xen-tools/"  . $CONFIG{'dist'} .  ".d";
+    my $dir = "/usr/lib/xen-tools/" . $CONFIG{ 'dist' } . ".d";
 
-    if ( ! -d $dir )
+    if ( !-d $dir )
     {
         print <<E_OR;
 
-  We're trying to configure an installation of $CONFIG{'dist'} in
+  We\'re trying to configure an installation of $CONFIG{'dist'} in
  $CONFIG{'location'} - but there is no hook directory for us to use.
 
-  This means we don't know how to configure this installation.
+  This means we don\'t know how to configure this installation.
 
-  We'd expect the hook directory to be : $dir
+  We\'d expect the hook directory to be : $dir
 
   Aborting.
 E_OR
@@ -262,15 +259,16 @@ E_OR
 
 sub runDistributionHooks
 {
+
     #
     #  Hook directory.
     #
-    my $hooks = "/usr/lib/xen-tools/"  . $CONFIG{'dist'} .  ".d/";
+    my $hooks = "/usr/lib/xen-tools/" . $CONFIG{ 'dist' } . ".d/";
 
     #
     #  Installation prefix
     #
-    my $prefix = $CONFIG{'location'};
+    my $prefix = $CONFIG{ 'location' };
 
     #
     #  If we're running verbosely then setup the client environment
@@ -279,9 +277,9 @@ sub runDistributionHooks
     #  This is useful in case this script is called outwith the usual
     # xen-create-image framework.
     #
-    if ( $CONFIG{'verbose'} )
+    if ( $CONFIG{ 'verbose' } )
     {
-        $ENV{'verbose'} = 1;
+        $ENV{ 'verbose' } = 1;
     }
 
     #
@@ -290,6 +288,7 @@ sub runDistributionHooks
     #
     foreach my $file ( sort( glob( $hooks . "*" ) ) )
     {
+
         # skip files that end with .dpkg-new, .dpkg-old or '~'
         next if ( $file =~ /\.dpkg-(new|old)/ );
         next if ( $file =~ /~$/ );
@@ -299,6 +298,7 @@ sub runDistributionHooks
         #
         if ( ( -x $file ) && ( -f $file ) )
         {
+
             #
             # Just display the name - no need to see the full path.
             #
@@ -317,18 +317,26 @@ sub runDistributionHooks
             #  Run the command.  This has different prolog and epilog
             # depending on whether we're running verbosely or not.
             #
-            if ( $CONFIG{'verbose'} )
+            if ( $CONFIG{ 'verbose' } )
             {
                 print "Running hook $name ['$cmd']\n";
                 print "--\n";
-                system( $cmd );
+                my $rc = system($cmd);
+                if ($rc != 0) {
+                print "hook $name failed: $?\n";
+                exit 1;
+            }
                 print "--\n";
                 print "Done\n\n";
             }
             else
             {
                 print "Running hook $name\n";
-                system( $cmd );
+                my $rc = system($cmd);
+                if ($rc != 0) {
+                    print "hook $name failed: $?\n";
+                    exit 1;
+                }
                 print "hook $name: done.\n";
             }
         }

bin/xt-guess-suite-and-mirror

@@ -0,0 +1,189 @@
+#!/usr/bin/perl -w
+
+=head1 NAME
+
+xt-guess-suite-and-mirror - Tries to guess the most suitable suite and
+mirror for DomUs on Debian and Ubuntu Dom0s.
+
+=cut
+
+=head1 SYNOPSIS
+
+  --suite       Show suite
+  --mirror      Show mirror
+
+  Shows both if no parameter is given.
+
+  Help Options:
+
+   --help       Show the help information for this script.
+   --manual     Show the manual for this script.
+   --version    Show the version number and exit.
+
+=cut
+
+=head1 DESCRIPTION
+
+xt-guess-suite-and-mirror tries to find the mirror and suite the Xen
+Dom0 is currently using and returns them in a way suitable for
+xen-create-image(1) or the backticks feature in xen-tools.conf.
+
+=cut
+
+=head1 AUTHORS
+
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
+
+=cut
+
+=head1 LICENSE
+
+Copyright (C) 2010 by The Xen-Tools Development Team. All rights
+reserved.
+
+This module is free software; you can redistribute it and/or modify it
+under the same terms as Perl itself. The LICENSE file contains the
+full text of the license.
+
+=cut
+
+###
+### Configuration
+###
+
+# Fallback to Debian or Ubuntu in case we can't find anything
+my $fallback = 'Debian';
+
+# Which mirrors to use if everything else fails (cdn.debian.net uses
+# GeoIP, see http://wiki.debian.org/DebianGeoMirror)
+my %fallback_mirror = ( Debian => 'http://cdn.debian.net/debian/',
+                        Ubuntu => 'http://archive.ubuntu.com/ubuntu/' );
+
+# Which suite to use if everything else fails. For Debian "stable"
+# should be the best choice independent of the time. Ubuntu does not
+# have aliases like stable or testing, so we take the nearest LTS
+# release which is 10.04 at the time of writing.
+my %fallback_suite = ( Debian => 'stable',
+                       Ubuntu => 'lucid' );
+
+# Where to look for the sources.list to parse
+my $sources_list_file = '/etc/apt/sources.list';
+
+use File::Slurp;
+use Getopt::Long;
+use Pod::Usage;
+
+use strict;
+
+
+#
+# Release number.
+#
+my $RELEASE = '4.2';
+
+# Init
+my $mirror = '';
+my $suite = '';
+my $found = 0;
+
+# Parsing command line options
+my $want_mirror  = 0;
+my $want_suite   = 0;
+my $want_version = 0;
+my $want_help    = 0;
+my $want_manual  = 0;
+
+my $result = GetOptions( 'mirror|m' => \$want_mirror,
+                         'suite|s'  => \$want_suite,
+                         'version'  => \$want_version,
+                         'manual'   => \$want_manual,
+                         'help'     => \$want_help );
+
+if ($want_help) {
+    pod2usage(0);
+}
+
+if ($want_manual) {
+    pod2usage( -verbose => 2 );
+}
+
+if (-r $sources_list_file) {
+    # sources.list exists, so it's something debianoid.
+
+    # read sources.list and split it into lines
+    my @sources_list = read_file($sources_list_file);
+
+    # Find the first line which is a Debian or Ubuntu mirror but not
+    # an updates, backports, volatile or security mirror.
+    foreach my $sources_list_entry (@sources_list) {
+        # Normalize line
+        chomp($sources_list_entry);
+        $sources_list_entry =~ s/^\s*(.*?)\s*$/$1/;
+
+        # Skip definite non-entries
+        next if $sources_list_entry =~ /^\s*($|#)/;
+
+        # Split up into fields
+        my @source_components = split(/\s+/, $sources_list_entry);
+
+        # Minimum number of components is 4
+        next if $#source_components < 3;
+
+        # Don't use deb-src entries.
+        next if $source_components[0] eq 'deb-src';
+
+        # Skip updates, backports, volatile or security mirror.
+        next if $source_components[2] !~ /^[a-z]+$/;
+
+        if ($source_components[1] =~ m(/debian/?$|/ubuntu/?$)) {
+            # Seems a typical mirror. Let's use that one
+
+            $mirror = $source_components[1];
+            $suite = $source_components[2];
+
+            $found = 1;
+            last;
+        }
+    }
+
+    warn "Couldn't parse $sources_list_file of the Dom0.\n" unless $found;
+}
+
+my $lsb_release = `which lsb_release`;
+chomp($lsb_release);
+
+if (!$found and $lsb_release and -x $lsb_release) {
+    my $vendor = `$lsb_release -s -i`;
+
+    if ($vendor eq 'Debian' or $vendor eq 'Ubuntu') {
+        $suite = `$lsb_release -s -c`;
+        chomp($suite);
+
+        unless ($suite) {
+            $suite = $fallback_suite{$vendor};
+            warn "Dom0 seems to be $vendor, but couldn't determine suite. Falling back to $suite.\n";
+        }
+
+        $mirror = $fallback_mirror{$vendor};
+
+        $found = 1;
+    }
+}
+
+if ($found) {
+    unless ($want_help || $want_version || $want_suite || $want_mirror) {
+        print "$mirror $suite\n";
+    } else {
+        if ($want_mirror) {
+            print "$mirror";
+        }
+        if ($want_suite) {
+            print "$suite";
+        }
+        print "\n";
+    }
+} else {
+    $suite  = $fallback_suite{$fallback};
+    $mirror = $fallback_mirror{$fallback};
+}

bin/xt-install-image

@@ -29,8 +29,11 @@ xt-install-image - Install a fresh copy of GNU/Linux into a directory
    --mirror         The mirror to use when installing with 'debootstrap'.
 
   Installation Options:
-   --install-method Specify the installation method to use.
-   --install-source Specify the installation source to use.
+   --install-method  Specify the installation method to use.
+   --install-source  Specify the installation source to use.
+   --debootstrap-cmd Specify which debootstrap command to
+                     use. Defaults to debootstrap if both, debootstrap
+                     and cdebootstrap are installed.
 
   All other options from xen-create-image will be passed as environmental
  variables.
@@ -77,18 +80,19 @@ Untar a .tar file into the new installation location.  This tarfile is assumed t
 =cut
 
 
-=head1 AUTHOR
+=head1 AUTHORS
 
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Dmitry Nedospasov, http://nedos.net/
+ Stéphane Jourdois
 
 =cut
 
-
 =head1 LICENSE
 
-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.
 
 This module is free software;
 you can redistribute it and/or modify it under
@@ -113,7 +117,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '3.9';
+my $RELEASE = '4.2';
 
 
 #
@@ -127,50 +131,31 @@ my $RELEASE = '3.9';
 #  needDirectory Defined if we need an install-source directory specified.
 #
 #
-my %dispatch =
-  (
-   "copy" =>
-     {
-               sub    => \&do_copy,
-        needBinary    => "/bin/cp",
-        needDirectory => 1,
-     },
-   "debootstrap" =>
-     {
-               sub => \&do_debootstrap,
-        needBinary => "/usr/sbin/debootstrap",
-     },
-   "image-server" =>
-     {
-               sub => \&do_image_server,
-           needURL => 1,
-     },
-   "rinse" =>
-     {
-               sub => \&do_rinse,
-        needBinary => "/usr/bin/rinse",
-     },
-   "rpmstrap" =>
-     {
-               sub => \&do_rpmstrap,
-        needBinary => "/usr/bin/rpmstrap",
-     },
-   "tar" =>
-     {
-               sub => \&do_tar,
-        needBinary => "/bin/tar",
-          needFile => 1,
-     }
-);
-
-
+my %dispatch = (
+                 "copy" => { sub           => \&do_copy,
+                             needBinary    => "/bin/cp",
+                             needDirectory => 1,
+                           },
+                 "debootstrap" => { sub        => \&do_debootstrap,
+                                    needBinary => "/usr/sbin/debootstrap",
+                                  },
+                 "rinse" => { sub        => \&do_rinse,
+                              needBinary => "/usr/sbin/rinse",
+                            },
+                 "rpmstrap" => { sub        => \&do_rpmstrap,
+                                 needBinary => "/usr/bin/rpmstrap",
+                               },
+                 "tar" => { sub        => \&do_tar,
+                            needBinary => "/bin/tar",
+                            needFile   => 1,
+                          } );
 
 
 
 #
 #  Read the global configuration file.
 #
-readConfigurationFile( "/etc/xen-tools/xen-tools.conf" );
+readConfigurationFile("/etc/xen-tools/xen-tools.conf");
 
 
 #
@@ -182,9 +167,9 @@ parseCommandLineArguments();
 #
 #  If we received a configuration file then read it.
 #
-if ( $CONFIG{'config'} )
+if ( $CONFIG{ 'config' } )
 {
-    my $path = $CONFIG{'config'};
+    my $path = $CONFIG{ 'config' };
 
     # If not fully-qualified then read from /etc/xen-tools.
     if ( $path !~ /^[\/]/ )
@@ -193,7 +178,7 @@ if ( $CONFIG{'config'} )
     }
 
     # Read the file, if it exists.
-    readConfigurationFile( $path ) if ( -e $path );
+    readConfigurationFile($path) if ( -e $path );
 }
 
 
@@ -206,86 +191,74 @@ checkArguments();
 #
 #  Now lookup our installation type and dispatch control to it.
 #
-if ( defined( $CONFIG{'install-method'} ) &&
-      length( $CONFIG{'install-method'} ) )
+if ( defined( $CONFIG{ 'install-method' } ) &&
+     length( $CONFIG{ 'install-method' } ) )
 {
 
     #
     #  Get the entry from the dispatch table.
     #
-    my $installer = $dispatch{ lc($CONFIG{'install-method'}) };
+    my $installer = $dispatch{ lc( $CONFIG{ 'install-method' } ) };
 
-    if ( defined( $installer ) )
+    if ( defined($installer) )
     {
+
         #
         #  If we found it.
         #
 
         # Do we need to test for a binary.
-        if  ( ( $installer->{'needBinary'} ) &&
-              ( ! -x $installer->{'needBinary'} ) )
+        if ( ( $installer->{ 'needBinary' } ) &&
+             ( !-x $installer->{ 'needBinary' } ) )
         {
-            print "The following required binary for the installation was not found\n";
-            print "\t" . $installer->{'needBinary'} . "\n";
+            print
+              "The following required binary for the installation was not found\n";
+            print "\t" . $installer->{ 'needBinary' } . "\n";
             exit 1;
         }
 
         # Do we need a directory specified as the installation source?
-        if ( ( $installer->{'needDirectory'} ) &&
-             ( ! $CONFIG{'install-source'} || ! -d $CONFIG{'install-source'} ) )
+        if ( ( $installer->{ 'needDirectory' } ) &&
+             ( !$CONFIG{ 'install-source' } || !-d $CONFIG{ 'install-source' } )
+           )
         {
             print "Please specify the source directory with --install-source\n";
-            if ( $CONFIG{'install-source'} )
+            if ( $CONFIG{ 'install-source' } )
             {
-                print "The specified directory $CONFIG{'install-source'} does not exist.\n";
+                print
+                  "The specified directory $CONFIG{'install-source'} does not exist.\n";
             }
             exit 1;
         }
 
         # Do we need a file specified as the installation source?
-        if ( ( $installer->{'needFile'} ) &&
-             ( ! $CONFIG{'install-source'} || ! -e $CONFIG{'install-source'} ) )
+        if ( ( $installer->{ 'needFile' } ) &&
+             ( !$CONFIG{ 'install-source' } || !-e $CONFIG{ 'install-source' } )
+           )
         {
             print "Please specify the source file with --install-source\n";
 
-            if ( $CONFIG{'install-source'} )
+            if ( $CONFIG{ 'install-source' } )
             {
-                print "The specified file $CONFIG{'install-source'} does not exist.\n";
+                print
+                  "The specified file $CONFIG{'install-source'} does not exist.\n";
             }
             exit 1;
         }
 
-        # Do we need an URL specified as the installation source?
-        if ( ( $installer->{'needURL'} ) &&
-             ( ! $CONFIG{'install-source'} ||
-               ( $CONFIG{'install-source'} !~ /^http/i ) ) )
-        {
-            print "Please specify the image server URL with --install-source\n";
-            exit 1;
-        }
-
-
-
         #
         #  Now we can call the appropriate handler.
         #
-        $installer->{'sub'}->();
+        $installer->{ 'sub' }->();
 
         #
         #  Did the operation succeed?
         #
         #  Test that we have some "standard" files present.
         #
-        foreach my $file ( qw( /bin/ls /bin/cp ) )
-        {
-            if ( ! -x $CONFIG{'location'} . $file )
-            {
-                print "The installation of the new system has failed.\n";
-                print "\n";
-                print "The system is missing the common file: $file\n";
-                exit 1;
-            }
-        }
+
+        checkForCommonFilesInChroot($CONFIG{ 'location' },
+                                    "installed system");
 
         #
         #  All done.
@@ -306,10 +279,6 @@ else
 
 
 
-
-
-
-
 =begin doc
 
   Read the specified configuration file, and update our global configuration
@@ -321,20 +290,20 @@ else
 
 sub readConfigurationFile
 {
-    my ($file) = ( @_ );
+    my ($file) = (@_);
 
     # Don't read the file if it doesn't exist.
-    return if ( ! -e $file );
+    return if ( !-e $file );
 
 
     my $line = "";
 
     open( FILE, "<", $file ) or die "Cannot read file '$file' - $!";
 
-    while (defined($line = <FILE>) )
+    while ( defined( $line = <FILE> ) )
     {
         chomp $line;
-        if ($line =~ s/\\$//)
+        if ( $line =~ s/\\$// )
         {
             $line .= <FILE>;
             redo unless eof(FILE);
@@ -344,7 +313,7 @@ sub readConfigurationFile
         next if ( $line =~ /^([ \t]*)\#/ );
 
         # Skip blank lines
-        next if ( length( $line ) < 1 );
+        next if ( length($line) < 1 );
 
         # Strip trailing comments.
         if ( $line =~ /(.*)\#(.*)/ )
@@ -367,6 +336,7 @@ sub readConfigurationFile
             # command expansion?
             if ( $val =~ /(.*)`([^`]+)`(.*)/ )
             {
+
                 # store
                 my $pre  = $1;
                 my $cmd  = $2;
@@ -374,7 +344,7 @@ sub readConfigurationFile
 
                 # get output
                 my $output = `$cmd`;
-                chomp( $output );
+                chomp($output);
 
                 # build up replacement.
                 $val = $pre . $output . $post;
@@ -385,7 +355,7 @@ sub readConfigurationFile
         }
     }
 
-    close( FILE );
+    close(FILE);
 }
 
 
@@ -408,35 +378,38 @@ sub parseCommandLineArguments
     #  Parse options.
     #
     GetOptions(
-               # Mandatory
-               "location=s",     \$CONFIG{'location'},
-               "dist=s",         \$CONFIG{'dist'},
-               "hostname=s",     \$CONFIG{'hostname'},
 
-               # Installation method
-               "install-method=s",  \$CONFIG{'install-method'},
-               "install-source=s",  \$CONFIG{'install-source'},
+        # Mandatory
+        "location=s", \$CONFIG{ 'location' },
+        "dist=s",     \$CONFIG{ 'dist' },
+        "hostname=s", \$CONFIG{ 'hostname' },
 
-               # Misc
-               "arch=s",         \$CONFIG{'arch'},
-               "cache=s",        \$CONFIG{'cache'},
-               "config=s",       \$CONFIG{'config'},
-               "mirror=s",       \$CONFIG{'mirror'},
+        # Installation method
+        "install-method=s", \$CONFIG{ 'install-method' },
+        "install-source=s", \$CONFIG{ 'install-source' },
+        "debootstrap-cmd=s", \$CONFIG{ 'debootstrap-cmd' },
 
-               # Help.
-               "verbose",        \$CONFIG{'verbose'},
-               "help",           \$HELP,
-               "manual",         \$MANUAL,
-               "version",        \$VERSION
-             );
+        # Misc
+        "arch=s",   \$CONFIG{ 'arch' },
+        "cache=s",  \$CONFIG{ 'cache' },
+        "cachedir=s", \$CONFIG{ 'cachedir' },
+        "config=s", \$CONFIG{ 'config' },
+        "mirror=s", \$CONFIG{ 'mirror' },
+
+        # Help.
+        "verbose", \$CONFIG{ 'verbose' },
+        "help",    \$HELP,
+        "manual",  \$MANUAL,
+        "version", \$VERSION
+    );
 
     pod2usage(1) if $HELP;
-    pod2usage(-verbose => 2 ) if $MANUAL;
+    pod2usage( -verbose => 2 ) if $MANUAL;
 
 
-    if ( $VERSION )
+    if ($VERSION)
     {
-        my $REVISION      = '$Revision: 1.65 $';
+        my $REVISION = '$Revision: 1.65 $';
         if ( $REVISION =~ /1.([0-9.]+) / )
         {
             $REVISION = $1;
@@ -459,10 +432,11 @@ sub parseCommandLineArguments
 
 sub checkArguments
 {
+
     #
     #  We require a location.
     #
-    if ( ! defined( $CONFIG{'location'} ) )
+    if ( !defined( $CONFIG{ 'location' } ) )
     {
         print "The '--location' argument is mandatory\n";
         exit 1;
@@ -472,7 +446,7 @@ sub checkArguments
     #
     #  Test that the location we've been given exists
     #
-    if ( ! -d $CONFIG{'location'} )
+    if ( !-d $CONFIG{ 'location' } )
     {
         print "The installation directory we've been given doesn't exist\n";
         print "We tried to use : $CONFIG{'location'}\n";
@@ -483,7 +457,7 @@ sub checkArguments
     #
     #  We require a distribution name.
     #
-    if ( ! defined( $CONFIG{'dist'} ) )
+    if ( !defined( $CONFIG{ 'dist' } ) )
     {
         print "The '--dist' argument is mandatory\n";
         exit 1;
@@ -497,18 +471,18 @@ sub checkArguments
     #  If there are no scripts then we clearly cannot
     # customise it!
     #
-    my $dir = "/usr/lib/xen-tools/"  . $CONFIG{'dist'} .  ".d";
+    my $dir = "/usr/lib/xen-tools/" . $CONFIG{ 'dist' } . ".d";
 
-    if ( ! -d $dir )
+    if ( !-d $dir )
     {
         print <<E_OR;
 
-  We're trying to configure an installation of $CONFIG{'dist'} in
+  We are trying to configure an installation of $CONFIG{'dist'} in
  $CONFIG{'location'} - but there is no hook directory for us to use.
 
-  This means we won't know how to configure this installation.
+  This means we would not know how to configure this installation.
 
-  We'd expect the hook directory to be : $dir
+  We would expect the hook directory to be $dir.
 
   Aborting.
 E_OR
@@ -520,11 +494,12 @@ E_OR
     #  Test that we received a valid installation type.
     #
     my $valid = 0;
-    if ( defined( $CONFIG{'install-method'} ) )
+    if ( defined( $CONFIG{ 'install-method' } ) )
     {
         foreach my $recognised ( keys %dispatch )
         {
-            $valid = 1 if ( lc($CONFIG{'install-method'}) eq lc($recognised) );
+            $valid = 1
+              if ( lc( $CONFIG{ 'install-method' } ) eq lc($recognised) );
         }
     }
     else
@@ -552,6 +527,29 @@ EOF
 
 
 
+=begin doc
+
+  Check if there are some common files in some chroot
+
+=end doc
+
+=cut
+
+sub checkForCommonFilesInChroot {
+    my ($chroot, $what) = @_;
+    foreach my $file (qw( /bin/ls /bin/cp ))
+    {
+        if ( !-x $chroot.$file )
+        {
+            print STDERR <<EOT;
+WARNING ($0): The $what at $chroot doesn\'t seem to be a full system.
+WARNING ($0): The $what is missing the common file: $file.
+EOT
+        }
+    }
+}
+
+
 
 =begin doc
 
@@ -566,12 +564,12 @@ EOF
 
 sub runCommand
 {
-    my ( $cmd ) = (@_ );
+    my ($cmd) = (@_);
 
     #
     #  Command start.
     #
-    $CONFIG{'verbose'} && print "Executing : $cmd\n";
+    $CONFIG{ 'verbose' } && print "Executing : $cmd\n";
 
     #
     #  Copy stderr to stdout, so we can see it, and make sure we log it.
@@ -587,20 +585,19 @@ sub runCommand
     {
         print "Running command '$cmd' failed.\n";
         print "Aborting\n";
-        exit;
+        exit 127;
     }
 
     #
     #  Command finished.
     #
-    $CONFIG{'verbose'} && print "Finished : $cmd\n";
+    $CONFIG{ 'verbose' } && print "Finished : $cmd\n";
 
-    return( $output );
+    return ($output);
 }
 
 
 
-
 =begin doc
 
   This function will copy all the .deb files from one directory
@@ -613,7 +610,7 @@ sub runCommand
 
 sub copyDebFiles
 {
-    my ( $source, $dest ) = ( @_ );
+    my ( $source, $dest ) = (@_);
 
     print "Copying files from $source -> $dest\n";
 
@@ -631,7 +628,7 @@ sub copyDebFiles
         #
         #  Only copy if the file doesn't already exist.
         #
-        if ( ! ( -e $dest . "/" . $name ) )
+        if ( !( -e $dest . "/" . $name ) )
         {
             File::Copy::cp( $file, $dest );
         }
@@ -642,8 +639,6 @@ sub copyDebFiles
 
 
 
-
-
 ###
 #
 #  Installation functions follow.
@@ -652,7 +647,6 @@ sub copyDebFiles
 
 
 
-
 =begin doc
 
   Install a new image of a distribution using `cp`.
@@ -663,14 +657,21 @@ sub copyDebFiles
 
 sub do_copy
 {
+
+    #
+    #  Check if the copy source has at least some "standard" files present.
+    #
+    checkForCommonFilesInChroot($CONFIG{ 'install-source' },
+                                "installation source");
+
     #
     #  Find the copy command to run from the configuration file.
     #
-    my $cmd = $CONFIG{'copy-cmd'} ;
-    if ( !defined( $cmd ) )
+    my $cmd = $CONFIG{ 'copy-cmd' };
+    if ( !defined($cmd) )
     {
         print "Falling back to default copy command\n";
-        $cmd = '/bin/cp -a $src/* $dest';   # Note: single quotes.
+        $cmd = '/bin/cp -a $src/* $dest';    # Note: single quotes.
     }
 
     #
@@ -682,12 +683,11 @@ sub do_copy
     #
     #  Run the copy command.
     #
-    runCommand( $cmd );
+    runCommand($cmd);
 }
 
 
 
-
 =begin doc
 
   Install a new image of Debian using 'debootstrap'.
@@ -698,15 +698,24 @@ sub do_copy
 
 sub do_debootstrap
 {
+
     #
     #  The command is a little configurable - mostly to allow you
     # to use cdebootstrap.
     #
-    my $cmd = $CONFIG{'debootstrap-cmd'} ;
-    if ( !defined( $cmd ) )
+    my $cmd = $CONFIG{ 'debootstrap-cmd' };
+    my $cachedir = $CONFIG{ 'cachedir' };
+    if ( !$cmd )
     {
-        print "Falling back to default debootstrap command\n";
-        $cmd = '/usr/sbin/debootstrap';
+        if (-x '/usr/sbin/debootstrap') {
+            $cmd = '/usr/sbin/debootstrap';
+        } elsif (-x '/usr/sbin/cdebootstrap') {
+            $cmd = '/usr/sbin/cdebootstrap';
+        } else {
+            print STDERR "Found neither debootstrap nor cdebootstrap and no --debootstrap-cmd given\n";
+            exit 1;
+        }
+        print "Using $cmd as debootstrap command\n";
     }
 
 
@@ -714,19 +723,28 @@ sub do_debootstrap
     #  Cache from host -> new installation if we've got caching
     # enabled.
     #
-    if ( $CONFIG{'cache'} eq "yes" )
+    if ( $CONFIG{ 'cache' } eq "yes" )
     {
         print "\nCopying files from host to image.\n";
-        runCommand( "mkdir -p $CONFIG{'location'}/var/cache/apt/archives" );
-        copyDebFiles( "/var/cache/apt/archives", "$CONFIG{'location'}/var/cache/apt/archives" );
-        print( "Done\n" );
+        unless( -d $cachedir ) {
+            my $xtcache = '/var/cache/xen-tools/archives/';
+            print("$cachedir not found, defaulting to $xtcache\n");
+            unless ( -d $xtcache ) {
+                system "mkdir -p $xtcache";
+            }
+            $cachedir = $xtcache;
+        }
+        runCommand("mkdir -p $CONFIG{'location'}/var/cache/apt/archives");
+        copyDebFiles( "$cachedir",
+                      "$CONFIG{'location'}/var/cache/apt/archives" );
+        print("Done\n");
     }
 
     #
     #  Propogate --verbose appropriately.
     #
     my $EXTRA = '';
-    if ( $CONFIG{'verbose'} )
+    if ( $CONFIG{ 'verbose' } )
     {
         $EXTRA = ' --verbose';
     }
@@ -734,33 +752,34 @@ sub do_debootstrap
     #
     #  Propogate the --arch argument
     #
-    if ( $CONFIG{'arch'} )
+    if ( $CONFIG{ 'arch' } )
     {
-        $EXTRA .= " --arch $CONFIG{'arch'}"
+        $EXTRA .= " --arch $CONFIG{'arch'}";
     }
 
 
     #
     #  This is the command we'll run
     #
-    my $command = "$cmd $EXTRA $CONFIG{'dist'} $CONFIG{'location'} $CONFIG{'mirror'}";
+    my $command =
+      "$cmd $EXTRA $CONFIG{'dist'} $CONFIG{'location'} $CONFIG{'mirror'}";
 
     #
     #  Run the command.
     #
-    runCommand( $command );
+    runCommand($command);
 
 
     #
     #  Cache from the new installation -> the host if we've got caching
     # enabled.
     #
-    if ( $CONFIG{'cache'} eq "yes" )
+    if ( $CONFIG{ 'cache' } eq "yes" )
     {
         print "\nCopying files from new installation to host.\n";
         copyDebFiles( "$CONFIG{'location'}/var/cache/apt/archives",
-                      "/var/cache/apt/archives" );
-        print( "Done\n" );
+                      "$cachedir" );
+        print("Done\n");
     }
 
 
@@ -768,162 +787,9 @@ sub do_debootstrap
 
 
 
-
 =begin doc
 
-  Install a system using the image-server.
-
-  Note:  NON-Advertised ....
-
-=end doc
-
-=cut
-
-sub do_image_server
-{
-    #
-    #  Load the modules we require.
-    #
-    my $test = 'use LWP::UserAgent; use CGI;';
-
-    #
-    #  Test loading the module, if it fails then
-    # we must abort.  We don't want to insist the module
-    # is installed since that adds to the dependencies
-    # which users will not require for the typical installation
-    # method(s).
-    #
-    eval( $test );
-    if ( $@ )
-    {
-        die "The module LDP::UserAgent wasn't found...\n";
-    }
-
-
-    #
-    #  The number of attempts to request the image from our
-    # image server, and the time to sleep between them.
-    #
-    my $attempts = 30;
-    my $sleep    = 30;
-
-
-    #
-    #  Build up the request we're going to send.
-    #
-    my $request = $CONFIG{'install-source'} . "/create.cgi?submit=1";
-
-    #
-    #  Some parameters are hard-wired.
-    #
-    $request .= "&arch=amd64";
-    $request .= "&root_device=/dev/sda";
-    $request .= "&ip1="      . $ENV{'ip1'};
-    $request .= "&dist="     . CGI::escapeHTML( $CONFIG{'dist'} );
-    $request .= "&hostname=" . CGI::escapeHTML( $CONFIG{'hostname'} );
-
-    #
-    #  We only care about some keys
-    #
-    foreach my $k ( qw/ dhcp broadcast gateway netmask  / )
-    {
-        # Skip values which aren't defined.
-        next unless defined $ENV{$k};
-
-        # CGI encode.
-        my $val = CGI::escapeHTML( $ENV{$k} );
-
-        # Add on to the request
-        $request .= "&$k=$val";
-    }
-
-
-    #
-    #  Create a new user agent.
-    #
-    my $ua = LWP::UserAgent->new;
-    $ua->timeout(10);
-    $ua->env_proxy;
-
-    #
-    #  Do the creation step
-    #
-    my $response = $ua->get( $request );
-    if ($response->is_success)
-    {
-        my $content = $response->content;
-
-        if ( $content =~ /fetch.cgi\?session=([^"]+)"/ )
-        {
-            my $session = $1;
-            my $new     = $CONFIG{'install-source'};
-            $new       .= "/fetch.cgi?session=$session";
-            my $attempt = 1;
-
-            # Make sure we don't wait indefinitely.
-            while( $attempt < $attempts )
-            {
-                $CONFIG{'verbose'} && print "Request: [$attempt/$attempts]\n";
-
-                #
-                #  Make a request to see if our tar file is ready yet.
-                #
-                $response = $ua->head( $new );
-                if ( $response->is_success )
-                {
-
-                    #
-                    #  Get the headers
-                    #
-                    my $header  = $response->headers();
-                    my $type    = $header->{'content-type'};
-
-                    #
-                    # OK our file is correct.
-                    #
-                    if ( $type =~ /tar/ )
-                    {
-                        #
-                        #  Download it to the installation root.
-                        #
-                        $ua->get( $new,
-                                  ":content_file" => $CONFIG{'location'} . "/$session.tar"
-                                );
-
-                        #
-                        #  If it worked .. then untar, remove, and return.
-                        #
-                        system( "cd $CONFIG{'location'} && tar --numeric-owner -xf $session.tar && rm -f $CONFIG{'location'}/$session.tar" );
-                        return 1;
-                    }
-                }
-
-                sleep( $sleep );
-                $attempt += 1;
-
-            }
-            print ( "ERROR:  Timeout waiting for image to be ready." );
-            return 0;
-        }
-        else
-        {
-            print( "ERROR:  Failed to find session.  Received this:\n$content\n" );
-            return 0;
-        }
-    }
-    else
-    {
-        print( "ERROR: Submitting the image create request failed:\n" . $response->status_line );
-        return 0;
-    }
-}
-
-
-
-
-=begin doc
-
-  Install a new distribution of GNU/Linux using the rpmstrap tool.
+  Install a new distribution of GNU/Linux using the rinse tool.
 
 =end doc
 
@@ -931,29 +797,31 @@ sub do_image_server
 
 sub do_rinse
 {
+
     #
     #  The command we're going to run.
     #
-    my $command = "rinse --distribution=$CONFIG{'dist'} --directory=$CONFIG{'location'}";
+    my $command =
+      "rinse --distribution=$CONFIG{'dist'} --directory=$CONFIG{'location'}";
 
     #
     #  Propogate the --arch argument
     #
-    if ( $CONFIG{'arch'} )
+    if ( $CONFIG{ 'arch' } )
     {
-        $command .= " --arch $CONFIG{'arch'}"
+        $command .= " --arch $CONFIG{'arch'}";
     }
 
 
     #
     #  Propogate the verbosity setting.
     #
-    if ( $CONFIG{'verbose'} )
+    if ( $CONFIG{ 'verbose' } )
     {
         $command .= " --verbose";
     }
 
-    runCommand( $command );
+    runCommand($command);
 }
 
 
@@ -972,8 +840,8 @@ sub do_rpmstrap
     #
     #  Propogate the verbosity setting.
     #
-    my $EXTRA='';
-    if ( $CONFIG{'verbose'} )
+    my $EXTRA = '';
+    if ( $CONFIG{ 'verbose' } )
     {
         $EXTRA .= " --verbose";
     }
@@ -981,7 +849,7 @@ sub do_rpmstrap
     #
     #  Propogate any arch setting we might have.
     #
-    if ( $CONFIG{'arch'} )
+    if ( $CONFIG{ 'arch' } )
     {
         $EXTRA .= " --arch $CONFIG{'arch'}";
     }
@@ -990,18 +858,17 @@ sub do_rpmstrap
     #  Setup mirror if present.
     #
     my $mirror = "";
-    $mirror    = $CONFIG{'mirror'} if ( $CONFIG{'mirror'} );
+    $mirror = $CONFIG{ 'mirror' } if ( $CONFIG{ 'mirror' } );
 
     #
     #  The command we're going to run.
     #
     my $command = "rpmstrap $EXTRA $CONFIG{'dist'} $CONFIG{'location'} $mirror";
-    runCommand( $command );
+    runCommand($command);
 }
 
 
 
-
 =begin doc
 
   Install a new image of a distribution using `tar`.
@@ -1012,14 +879,15 @@ sub do_rpmstrap
 
 sub do_tar
 {
+
     #
     #  Find the tar command to run from the configuration file.
     #
-    my $cmd = $CONFIG{'tar-cmd'} ;
-    if ( !defined( $cmd ) )
+    my $cmd = $CONFIG{ 'tar-cmd' };
+    if ( !defined($cmd) )
     {
         print "Falling back to default tar command\n";
-        $cmd = '/bin/tar --numeric-owner -xvf $src';  # Note: single quotes.
+        $cmd = '/bin/tar --numeric-owner -xvf $src';    # Note: single quotes.
     }
 
     #
@@ -1030,5 +898,5 @@ sub do_tar
     #
     #  Run a command to copy an installed system into the new root.
     #
-    runCommand( "cd $CONFIG{'location'} && $cmd" );
+    runCommand("cd $CONFIG{'location'} && $cmd");
 }

debian/NEWS

@@ -0,0 +1,27 @@
+xen-tools (4.2~rc1-1) unstable; urgency=low
+
+  By default, xen-create-image now generates a random root password and
+  displays it as plain text at the end of the DomU generation process.
+  Use --genpass=0 and --passwd=1 to interactively set a root password
+  without the password being displayed.
+
+ -- Axel Beckert <abe@debian.org>  Tue, 03 Aug 2010 16:14:42 +0200
+
+xen-tools (4.2~beta1-1) unstable; urgency=low
+
+  If the DomU hangs with "Waiting for root file system" despite
+  /dev/xvd* is used as disk device, adding "xen-blkfront" to
+  /etc/initramfs-tools/modules and runing "update-initramfs -u"
+  afterwards may help.
+
+  If the Dom0 is a Debian or Ubuntu, the distribution and suite for
+  DomUs defaults to the distribution and suite the Dom0 is
+  running. Otherwise Debian DomUs get "stable" and Ubuntu "lucid" by
+  default.
+
+  Default Debian/Ubuntu mirror is now determined by looking into
+  /etc/apt/sources.list (if it exists) and taking the first entry with
+  path ending in /debian/ there.
+
+ -- Axel Beckert <abe@debian.org>  Sun, 30 May 2010 22:36:16 +0200
+

debian/README.source

@@ -0,0 +1,22 @@
+How to build xen-tools directly from the Git repository?
+========================================================
+
+Clone the git repository and change to the directory of your local
+working copy.
+
+$ git clone git://gitorious.org/xen-tools/xen-tools.git
+$ cd xen-tools
+
+If you just want to build the binary package, run
+
+$ make changelog
+$ dpkg-buildpackage -uc -us -b
+
+If you want to build source and binary packages, e.g. for an upload to
+Debian or Ubuntu:
+
+$ make orig-tar-gz
+$ dpkg-buildpackage
+
+
+ -- Axel Beckert <abe@debian.org>, Mon, 13 Sep 2010 14:30:05 +0200

debian/changelog

@@ -1,3 +1,180 @@
+xen-tools (4.2-1) unstable; urgency=low
+
+  * New upstream release
+    - Fixes several cases of broken or incomplete config files with
+      unexpected or seldom parameter combinations. (Closes: #484652)
+    - Updates examples in /etc/xen-tools.conf to better reflect current
+      state
+    - Allows usage of xvc* as serial console as used as default by older
+      Xen versions.
+    - Preliminary support for Ubuntu 11.04 (Natty) and Debian 7.0 (Wheezy)
+      (Closes: #597521)
+    - Switches default mirror for EoL'ed Ubuntu 8.10 (Intrepid) and Debian
+      4.0 (Etch) to the distributions' archives for old releases.
+  * Does no more try extract the upstream changelog during debian package
+    build. The commit which introduced this problem has been reverted.
+    Document more clearly in debian/README.source how to build the package
+    from a checked out copy of the git repository, especially that the
+    upstream changelog has to be generated first out of the VCS log.
+    (Closes: #595883)
+  * Update debian/copyright: Add Stéphane Jourdois to list of authors.
+
+ -- Axel Beckert <abe@debian.org>  Tue, 05 Oct 2010 19:01:49 +0200
+
+xen-tools (4.2~rc1-1) unstable; urgency=low
+
+  [Axel Beckert]
+  * New upstream release candidate
+    - Uses GeoIP for Debian mirrors: Default Debian mirror is now
+      cdn.debian.net, see http://wiki.debian.org/DebianGeoMirror for
+      details.
+    - Uses the same 15-disable-hwclock hook for Debian as for Ubuntu DomUs
+      (Closes: #588880)
+    - Mounts not only /proc but also /dev/pts automatically before running
+      any customisation hooks (Closes: #588783)
+    - Uses apt-config to parse Dom0's apt.conf. (Closes: #560011)
+    - Fixes wrong loop module parameter syntax in warning. Thanks to
+      Daniel Baumann for spotting this. (Closes: #516902)
+    - With --verbose, the output of commands called by xen-tools
+      (e.g. debootstrap) is not only logged, but also printed to
+      STDOUT. (Closes: #513126)
+    - Adds btrfs support.
+  * Bump Standards-Version to 3.9.1 (no changes)
+
+  [Stéphane Jourdois]
+  * [debian/control] Suggest btrfs-tools
+
+ -- Axel Beckert <abe@debian.org>  Sun, 15 Aug 2010 19:34:38 +0200
+
+xen-tools (4.2~beta1-1) unstable; urgency=low
+
+  * New maintainer and upstream authors
+  * Reintroduction into Debian Unstable (Closes: #566714)
+  * New upstream beta version
+    - Needs dependency on libfile-slurp-perl
+    - Supports for more recent versions of Fedora, Ubuntu and Debian
+      (Closes: #499477)
+    - Supports pygrub. (Added "Suggests: xen-utils" to debian/control)
+    - Uses hvc0 and xvda devices by default
+    - Sets umask to 0077 before creating disk images (Closes: #548909)
+    - Makes sure, MAKEDEV is found in either /dev/ or /sbin/
+      (Closes: #502798, #515228)
+    - Changed rinse path to /usr/sbin/. (Closes: #511211)
+    - Doesn't delete configuration file if it already exists when
+      xen-create-image is run. (Closes: #520177)
+    - Doesn't write the FQDN into /etc/hostname (Closes: #492583)
+    - Dereferences pointers before hashing them to generate a MAC
+      address. (Closes: #547265)
+    - Calls pwconv and grpconv inside chroot when installing Fedora
+      (Closes: #499476)
+    - Fixed typo in /usr/lib/xen-tools/*.d/75-fixup-securetty
+      (Closes: #503339)
+    - Makes better decisions about when to enable Debian security updates
+      in the created DomU (LP: #309750)
+    - Installs dhclient for CentOS and Fedora if DHCP networking is
+      requested (LP: #241446)
+    - Fixes some bashisms (Closes: #530226)
+      * [^y] → [!y] (Thanks to Mathieu Parent!)
+      * kill -HUP → kill -s HUP (found by checkbashism)
+      * ${parm/?/pat[/str]} → echo | sed
+      * echo -e → printf
+      * read → read dummy
+    - xt-install-image now exits with return value 127 instead of 0 to
+      indicate errors on running the command given in --install-method.
+      (Closes: #534290)
+    - The debootstrap command now also can be configured on the
+      commandline with --debootstrap-cmd in xen-create-image and
+      xt-install-image (Enhances fix for #436480 which added the
+      debootstrap-cmd config file option)
+    - Checks for debootstrap and cdebootstrap, uses debootstrap if both
+      are installed (Changed "Depends: debootstrap" to "Depends:
+      debootstrap | cdebootstrap" in debian/control)
+    - Added new files TODO and KNOWN_BUGS to debian/docs.
+  * Removal of /etc/bash_completion.d/xm from the package since
+    bash-completion ships a more elaborate version of that file. (Closes:
+    #566683, #550590, LP: #538917, #484098)
+  * Downgrade reiserfsprogs and xfsprogs to Suggests. (Closes: #561618,
+    LP: #80233)
+  * Added evms-cli to Suggests. It has been removed from Debian before
+    Lenny, but it is necessary for some optional functionality of
+    xen-tools. And since some Debian derived distributions (e.g. Ubuntu
+    LTS and grml) still support it, it's included for the sake of
+    completeness and correctness.
+  * Added cfengine2 to Suggests. It is helpful to have it installed when
+    using the cfengine2 role.
+  * Bump Standards-Version to 3.8.4 (no changes necessary)
+  * Bump Debhelper Compatibility to 7
+    - Replace "dh_clean -k" by "dh_prep"
+  * Add Vcs-* headers pointing to new upstream and packaging repository
+  * Fix some Lintian warnings:
+    - [debian/control]: debhelper-but-no-misc-depends
+    - [debian/copyright]: copyright-without-copyright-notice
+    - [debian/source/format]: missing-debian-source-format
+  * Added a README.source explaining how to build xen-tools directly from
+    the Git repository.
+  * Overhauled package description
+
+ -- Axel Beckert <abe@debian.org>  Sun, 30 May 2010 22:32:30 +0200
+
+xen-tools (4.1-1) unstable; urgency=low
+
+  - New command line argument '--no-hosts' to avoid touching /etc/hosts
+    on dom0
+  - New command line argument '--pygrub' to setup a guest for pygrub use.
+  - Generated configuration file should work for --image-dev + --swap-dev
+    again.
+  - Always use /dev/pts for new images.
+
+ -- Steve Kemp <skx@debian.org>  Sun, 23 Nov 2008 13:06:01 +0000
+
+xen-tools (3.9-6) unstable; urgency=low
+
+  - Allow command line flags to be unset.
+    Thanks to Ruud Koolen for the patch.
+    (Closes: #484338)
+
+ -- Steve Kemp <skx@debian.org>  Tue, 14 Oct 2008 22:00:22 +0000
+
+xen-tools (3.9-5) unstable; urgency=medium
+
+  - Record the ARCH for RPM-based distros.
+    (Closes: #475125)
+  - Abort if the generated configuration file already exists.
+    (Closes: #499475)
+
+ -- Steve Kemp <skx@debian.org>  Mon, 13 Oct 2008 19:20:21 +0000
+
+xen-tools (3.9-4) unstable; urgency=high
+
+  * Changed two defaults in xen-tools.conf to conform
+    to the defaults used by the xen packages:
+      + serial_device: tty1 -> hvc0
+      + disk_device:   sda  -> xvda
+
+  * Priority High because of RC bug. (closes: #499282)
+
+ -- Radu Spineanu <radu@debian.org>  Tue, 30 Sep 2008 02:02:21 +0300
+
+xen-tools (3.9-3) unstable; urgency=medium
+
+  - Ensure that Fedora guests get /dev/pts mounted.
+    Thanks to  Giovanni Biscuolo (Closes: #474919)
+  - Add the new hostnames to /etc/hosts on the dom0 in the correct order.
+    Thanks to Wolfgang Karall (Closes: #477775)
+  - Ensure that packages are remoed non-interactively for scripted stuff.
+    Thanks to Wolfgang Karall (Closes: #477629)
+  - Correctly handle custom partitioning systems.
+    Thanks to Stéphane AICARDI (Closes: #477334)
+
+ -- Steve Kemp <skx@debian.org>  Wed, 20 Feb 2007 21:22:23 +0000
+
+xen-tools (3.9-2) unstable; urgency=high
+
+  - Ensure that the hook scripts which setup networking details for
+    Debian & Ubuntu guests will correctly setup teh broadcast address.
+
+ -- Steve Kemp <skx@debian.org>  Wed, 20 Feb 2007 21:22:23 +0000
+
 xen-tools (3.9-1) unstable; urgency=low
 
   - general:
@@ -37,9 +214,9 @@ xen-tools (3.8-1) unstable; urgency=low
     (Closes: #439233)
   * Use 'apt-get remove' rather than 'dpkg --purge' when removing packages
     in hooks.  (Closes: #441981)
- 
+
   [ Radu Spineanu ]
-  * debian/control: Roland Stigge and I switched maintainer places. 
+  * debian/control: Roland Stigge and I switched maintainer places.
   * debian/control: Added Steve Kemp to Uploaders.
 
  -- Radu Spineanu <radu@debian.org>  Wed, 03 Oct 2007 00:39:58 +0300
@@ -149,8 +326,8 @@ xen-tools (3.0-1) unstable; urgency=low
 
 xen-tools (3.0~beta1-2) unstable; urgency=low
 
-  * Remove old symlinks and directories during preinst. (closes: #401834) 
-  
+  * Remove old symlinks and directories during preinst. (closes: #401834)
+
  -- Radu Spineanu <radu@debian.org>  Wed,  6 Dec 2006 15:58:44 +0200
 
 xen-tools (3.0~beta1-1) unstable; urgency=low
@@ -158,7 +335,7 @@ xen-tools (3.0~beta1-1) unstable; urgency=low
   * Development snapshot
   * Mention the --mac option in the man page.
     (closes: #399708)
-  * Set the locale version to 'C' to avoid perl warnings. 
+  * Set the locale version to 'C' to avoid perl warnings.
     (closes: #399778)
 
  -- Radu Spineanu <radu@debian.org>  Mon,  4 Dec 2006 16:55:31 +0200
@@ -181,7 +358,7 @@ xen-tools (2.8-2) unstable; urgency=low
 
 xen-tools (2.8-1) unstable; urgency=low
 
-  * New upstream release 
+  * New upstream release
 
  -- Radu Spineanu <radu@debian.org>  Wed,  8 Nov 2006 00:35:40 +0200
 
@@ -203,13 +380,13 @@ xen-tools (2.7-3) unstable; urgency=low
 
 xen-tools (2.7-2) unstable; urgency=low
 
-  * Fixed 2.6-2 changelog entry. 
+  * Fixed 2.6-2 changelog entry.
 
  -- Radu Spineanu <radu@debian.org>  Sat, 14 Oct 2006 02:21:25 +0300
 
 xen-tools (2.7-1) unstable; urgency=low
 
-  * New upstream release 
+  * New upstream release
 
  -- Radu Spineanu <radu@debian.org>  Sat, 14 Oct 2006 02:16:20 +0300
 
@@ -270,7 +447,7 @@ xen-tools (2.3-1) unstable; urgency=high
     using a specific version of debootstrap.
     - Updated manpages to avoid word-wrapping.
     - Updated --noswap option such that a LVM swap volume isn't created.
-    - Reverted the usage of '--keep-debootstrap-dir' since that is a 
+    - Reverted the usage of '--keep-debootstrap-dir' since that is a
       "recent" thing.  Will switch to keeping a global logfile for error
       purposes.
       (Closes: #383589)
@@ -312,7 +489,7 @@ xen-tools (2.2-2) unstable; urgency=low
 xen-tools (2.2-1) unstable; urgency=high
 
   * New upstream release, fixes several important bugs hence urgency=high.
-    - /etc/fstab creation generated correctly for reiserfs 
+    - /etc/fstab creation generated correctly for reiserfs
       (Closes: #379023) (Closes: #379096)
     - --force works with xfs filesystems.
       (Closes: #377684)
@@ -363,7 +540,7 @@ xen-tools (2.0-1) unstable; urgency=low
     (Closes: #373800)
 
  -- Steve Kemp <skx@debian.org>  Tue, 20 Jun 2006 09:57:45 +0000
-  
+
 xen-tools (1.6-1) unstable; urgency=low
 
   * New upstream release (closes: #368983)
@@ -406,26 +583,26 @@ xen-tools (1.4-1) unstable; urgency=low
      (Closes: #363070)
   *  Added new option --initrd to specify the initial ramdisk.
      (Closes: #365500)
-  
+
  -- Steve Kemp <skx@debian.org>  Sun, 7 May 2006 14:43:43 +0000
 
 xen-tools (1.3-1) unstable; urgency=low
 
   * New upstream release
-     + Ignore .dpkg-(new|old) files in the hooks directory 
+     + Ignore .dpkg-(new|old) files in the hooks directory
        (closes: #357716)
 
  -- Radu Spineanu <radu@debian.org>  Sat, 15 Apr 2006 13:44:36 +0300
 
 xen-tools (1.1-1) unstable; urgency=low
 
-  * New upstream release 
-     + Disk devices are no longer created one unit bigger than asked 
+  * New upstream release
+     + Disk devices are no longer created one unit bigger than asked
        (closes: #353155)
      + Populate /dev on the virtual server (closes: #352942)
      + Added --use-ide flag in case people want ide style device names
        (closes: #352937)
-     + xen.cfg is no longer broken when using LVM 
+     + xen.cfg is no longer broken when using LVM
 
  -- Radu Spineanu <radu@debian.org>  Tue, 21 Feb 2006 01:28:28 +0200
 

debian/compat

@@ -1 +1 @@
-4
+7

debian/control

@@ -1,18 +1,38 @@
 Source: xen-tools
 Section: utils
 Priority: extra
-Maintainer: Roland Stigge <stigge@antcom.de>
-Uploaders: Radu Spineanu <radu@debian.org>, Steve Kemp <skx@debian.org>
-Build-Depends: debhelper (>= 4.0.0), libtest-pod-perl, libtext-template-perl
-Standards-Version: 3.7.3
+Maintainer: Axel Beckert <abe@debian.org>
+Build-Depends: debhelper (>= 7.0.0), libtest-pod-perl, libtext-template-perl
+Standards-Version: 3.9.1
 Homepage: http://xen-tools.org/software/xen-tools
+Vcs-Browser: http://gitorious.org/xen-tools/xen-tools
+Vcs-Git: git://gitorious.org/xen-tools/xen-tools.git
 
 Package: xen-tools
 Architecture: all
-Depends: debootstrap, perl-modules, libtext-template-perl, libconfig-inifiles-perl
-Recommends: xen-hypervisor-amd64 | xen-hypervisor-i386 | xen-hypervisor-i386-pae, reiserfsprogs, xfsprogs, rinse, xen-shell, libexpect-perl
-Description: Tools to manage Debian XEN virtual servers
- This package contains tools to manage Debian based XEN virtual servers.
+Depends: debootstrap | cdebootstrap, perl-modules, libtext-template-perl, libconfig-inifiles-perl, libfile-slurp-perl, ${misc:Depends}
+Recommends: xen-hypervisor-amd64 | xen-hypervisor-i386 | xen-hypervisor-i386-pae, rinse, xen-shell, libexpect-perl
+Suggests: reiserfsprogs, xfsprogs, xen-utils, cfengine2, evms-cli, btrfs-tools
+Description: Tools to manage Xen virtual servers
+ This package contains tools to manage Debian based Xen virtual servers.
  .
  Using the scripts you can easily create fully configured Xen guest
- domains (domU) which can be listed, updated, or copied easily.
+ domains (DomU) which can be listed, updated, or copied easily.
+ .
+ xen-tools currently can install:
+ .
+   * Debian 3.1 Sarge (i386 only)
+   * Debian 4.0 Etch
+   * Debian 5.0 Lenny
+   * Debian 6.0 Squeeze
+   * Debian Sid (Unstable)
+   * Ubuntu 6.06 Dapper Drake (LTS)
+   * Ubuntu 6.10 Edgy Eft
+   * Ubuntu 7.04 Feisty Fawn
+   * Ubuntu 7.10 Gutsy Gibbon
+   * Ubuntu 8.04 Hardy Heron (LTS)
+   * Ubuntu 8.10 Intrepid Ibex
+   * Ubuntu 9.04 Jaunty Jackaplope
+   * Ubuntu 9.10 Karmic Koala
+   * Ubuntu 10.04 Lucid Lynx (LTS)
+   * Ubuntu 10.10 Maverick Meerkat

debian/copyright

@@ -3,7 +3,11 @@ Tue, 20 Dec 2005 02:21:05 +0200.
 
 It was downloaded from http://xen-tools.org/software/xen-tools/
 
-Copyright Holder: Steve Kemp <steve@steve.org.uk>
+Copyright 2005-2009: Steve Kemp <steve@steve.org.uk>
+Copyright 2010: The Xen-Tools Development Team, currently consisting of:
+		Axel Beckert <abe@deuxchevaux.org>,
+		Dmitry Nedospasov <dmitry@nedos.net>, and
+		Stéphane Jourdois <sjourdois@gmail.com>
 
 License:
 
@@ -21,4 +25,3 @@ Perl is distributed under licenses:
     On Debian GNU/Linux systems, the complete text of the GNU General
     Public License can be found in /usr/share/common-licenses/GPL' and
     the Artistic Licence in /usr/share/common-licenses/Artistic'.
-

debian/docs

@@ -2,4 +2,5 @@ AUTHORS
 README
 SUPPORT
 BUGS
-TODO
+TODO
+KNOWN_BUGS

debian/examples/setup-kernel-initrd

@@ -53,7 +53,7 @@ cat <<EOF
   Press enter to continue, or Ctrl-c to abort.
 
 EOF
-read
+read __dummy
 
 
 

debian/preinst

@@ -23,5 +23,16 @@ if [ -d "/usr/lib/xen-tools/ubuntu.d" ]; then
 	rm -r /usr/lib/xen-tools/ubuntu.d
 fi
 
+#
+# 4.1 -> 4.2
+#
+
+if [ -L "/usr/lib/xen-tools/intrepid.d" ]; then
+        rm /usr/lib/xen-tools/intrepid.d
+fi
+if [ -L "/usr/lib/xen-tools/karmic.d" ]; then
+        rm /usr/lib/xen-tools/karmic.d
+fi
+
 #DEBHELPER#
 exit 0

debian/rules

@@ -25,7 +25,7 @@ clean:
 install: build
 	dh_testdir
 	dh_testroot
-	dh_clean -k 
+	dh_prep
 
 	make manpages
 	make install prefix=`pwd`/debian/xen-tools

debian/source/format

@@ -0,0 +1 @@
+1.0

etc/xen-tools.conf

@@ -52,7 +52,7 @@
 # LVM volume group here instead
 #
 ##
-# lvm = skx-vg
+# lvm = vg0
 
 
 #
@@ -107,13 +107,13 @@ install-method = debootstrap
 # (This allows you to install from a .tar.bz file, rather than a plain
 # tar file, use cdebootstrap, etc.)
 #
-# install-method=copy:
+# install-method = copy:
 # copy-cmd = /bin/cp -a $src/* $dest
 #
-# install-method=debootstrap:
-# debootstrap-cmd=/usr/sbin/debootstrap
+# install-method = debootstrap:
+# debootstrap-cmd = /usr/sbin/debootstrap
 #
-# install-method=tar:
+# install-method = tar:
 # tar-cmd  = /bin/tar --numeric-owner -xvf $src
 #
 #
@@ -130,24 +130,13 @@ memory = 128Mb    # Memory size
 swap   = 128Mb    # Swap size
 # noswap = 1      # Don't use swap at all for the new system.
 fs     = ext3     # use the EXT3 filesystem for the disk image.
-dist   = etch     # Default distribution to install.
+dist   = `xt-guess-suite-and-mirror --suite` # Default distribution to install.
 image  = sparse   # Specify sparse vs. full disk images.
 
 #
-#  Currently supported and tested distributions include:
-#
-# via Debootstrap:
-#
-#  Debian:
-#   sid, sarge, etch, lenny.
-#
-#  Ubuntu:
-#   edgy, feisty, dapper.
-#
-# via Rinse:
-#   centos-4, centos-5.
-#   fedora-core-4, fedora-core-5, fedora-core-6, fedora-core-7
-#
+#  See the README for currently supported and tested distributions. You can
+# either find it in the root directory of the unpacked source or, on Debian
+# and Ubuntu based systems, in /usr/share/doc/xen-tools/README.gz
 #
 
 
@@ -160,14 +149,30 @@ image  = sparse   # Specify sparse vs. full disk images.
 # Uncomment and adjust these network settings if you wish to give your
 # new instances static IP addresses.
 #
-# gateway   = 192.168.1.1
-# netmask   = 255.255.255.0
-# broadcast = 192.168.1.255
+# gateway    = 192.168.1.1
+# netmask    = 255.255.255.0
+# broadcast  = 192.168.1.255
 #
 # Uncomment this if you wish the images to use DHCP
 #
 # dhcp = 1
 
+#
+# Uncomment and adjust this setting if you wish to give your new
+# instances a specific nameserver.
+#
+# By default, nameserver is not set, and Dom0's /etc/resolv.conf will
+# be copied to guest.
+#
+# nameserver = 192.168.1.1
+#
+
+#
+# Setup bridge name for host vif. Usefull if you use bridged networking
+# for guests.
+#
+# bridge = xendmz
+#
 
 ##
 # Misc options
@@ -181,10 +186,41 @@ image  = sparse   # Specify sparse vs. full disk images.
 #
 
 #
-# Uncomment the following line if you wish to interactively setup
-# a new root password for images.
+# The default cachedir is, /var/cache/apt/archives/, however if it
+# does not exist it will default to /var/cache/xen-tools/archives/
+# Uncomment the line below to set it to something else.
+#
+# cachedir = /var/cache/xen-tools/archives/
+#
+
+#
+# Uncomment the following line if you wish not to generate a new root
+# password for the new guest.
+#
+# genpass = 0
+#
+
+#
+# You can also change the password length by uncommenting and
+# changing the line below
+#
+# genpass_len = 8
+#
+
+#
+# You can yet change the hashing method to encrypt the generated
+# password by changing the line below.
+# Valid values : md5, sha256 and sha512.
+#
+# hash_method = sha256
+#
+
+#
+# Uncomment the following line if you wish to interactively setup a
+# new root password for images.
 #
 # passwd = 1
+#
 
 #
 # If you'd like all accounts on your host system which are not present
@@ -196,8 +232,8 @@ image  = sparse   # Specify sparse vs. full disk images.
 #
 # Default kernel and ramdisk to use for the virtual servers
 #
-kernel      = /boot/vmlinuz-`uname -r`
-initrd      = /boot/initrd.img-`uname -r`
+kernel = /boot/vmlinuz-`uname -r`
+initrd = /boot/initrd.img-`uname -r`
 
 #
 #  The architecture to use when using debootstrap, rinse, or rpmstrap.
@@ -205,13 +241,13 @@ initrd      = /boot/initrd.img-`uname -r`
 #  This is most useful on 64 bit host machines, for other systems it
 # doesn't need to be used.
 #
-# arch=[i386|amd64]
+# arch = [i386|amd64]
 #
 
 #
 # The default mirror for debootstrap to install Debian-derived distributions
 #
-mirror = http://ftp.us.debian.org/debian/
+mirror = `xt-guess-suite-and-mirror --mirror`
 
 #
 # A mirror suitable for use when installing the Dapper release of Ubuntu.
@@ -221,24 +257,36 @@ mirror = http://ftp.us.debian.org/debian/
 #
 #  If you like you could use per-distribution mirrors, which will
 # be more useful if you're working in an environment where you want
-# to regularly use multiple distributions:
+# to regularly use multiple distributions. The following are the
+# default values used (for Debian the GeoIP feature is used, see
+# http://wiki.debian.org/DebianGeoMirror):
 #
-# mirror_sid=http://ftp.us.debian.org/debian
-# mirror_sarge=http://ftp.us.debian.org/debian
-# mirror_etch=http://ftp.us.debian.org/debian
-# mirror_dapper=http://archive.ubuntu.com/ubuntu
-# mirror_edgy=http://archive.ubuntu.com/ubuntu
-# mirror_feisty=http://archive.ubuntu.com/ubuntu
-# mirror_gutsy=http://archive.ubuntu.com/ubuntu
+# mirror_sarge = http://archive.debian.org/debian
+# mirror_etch = http://archive.debian.org/debian
+# mirror_lenny = http://cdn.debian.net/debian
+# mirror_squeeze = http://cdn.debian.net/debian
+# mirror_wheezy = http://cdn.debian.net/debian
+# mirror_sid = http://cdn.debian.net/debian
+# mirror_dapper = http://archive.ubuntu.com/ubuntu
+# mirror_edgy = http://old-releases.ubuntu.com/ubuntu
+# mirror_feisty = http://old-releases.ubuntu.com/ubuntu
+# mirror_gutsy = http://old-releases.ubuntu.com/ubuntu
+# mirror_hardy = http://archive.ubuntu.com/ubuntu
+# mirror_intrepid = http://old-releases.ubuntu.com/ubuntu
+# mirror_karmic = http://archive.ubuntu.com/ubuntu
+# mirror_lucid = http://archive.ubuntu.com/ubuntu
+# mirror_maverick = http://archive.ubuntu.com/ubuntu
+# mirror_natty = http://archive.ubuntu.com/ubuntu
 
 
 #
 #  Filesystem options for the different filesystems we support.
 #
-ext3_options   = noatime,nodiratime,errors=remount-ro
-ext2_options   = noatime,nodiratime,errors=remount-ro
-xfs_options    = defaults
-reiser_options = defaults
+ext3_options     = noatime,nodiratime,errors=remount-ro
+ext2_options     = noatime,nodiratime,errors=remount-ro
+xfs_options      = defaults
+reiserfs_options = defaults
+btrfs_options    = defaults
 
 #
 #  Uncomment if you wish newly created images to boot once they've been
@@ -248,17 +296,17 @@ reiser_options = defaults
 
 
 #
-#  If you're using a newer version of the Xen guest kernel you will
-# need to make sure that you use 'xvc0' for the guest serial device,
+#  If you're using the lenny or later version of the Xen guest kernel you will
+# need to make sure that you use 'hvc0' for the guest serial device,
 # and 'xvdX' instead of 'sdX' for serial devices.
 #
 #  You may specify the things to use here:
 #
-# serial_device = tty1 #default
-# serial_device = xvc0
+# serial_device = hvc0 #default
+# serial_device = tty1
 #
-# disk_device = sda  #default
-# disk_device = xvda
+# disk_device = xvda #default
+# disk_device = sda
 #
 
 
@@ -274,3 +322,20 @@ reiser_options = defaults
 # output    = /etc/xen
 # extension = .cfg
 #
+
+#
+#  Here you can control weather your dom0's /etc/hosts file should be
+# appended with the new guest, and also if your dom0's /etc/hosts file
+# should be copied to the new guest.
+#
+#  Change the following options to 1 to set them
+# nohosts - don't touch the dom0's /etc/hosts file
+# copyhosts - copy the dom0's /etc/hosts to the guest
+#
+#  by default new guests ARE added to the dom0's /etc/hosts file
+# nohosts = 0 # default
+#
+#  by default the dom0's /etc/hosts IS NOT copied
+# copyhosts = 0 # default
+#
+

etc/xm.tmpl

@@ -6,35 +6,75 @@
 #
 #  Kernel + memory size
 #
-{ if ( $kernel )
+{ if ( ( $kernel ) && ( !defined($pygrub)) )
   {
     $OUT.= "kernel      = '$kernel'";
   }
 }
-{ if ( $initrd )
+{ if ( ( $initrd ) && ( !defined($pygrub)) )
   {
     $OUT.= "ramdisk     = '$initrd'";
   }
 }
+{
+  if ( $pygrub )
+  {
+    my $pygrub_bin = '';
+    foreach my $pygrub_path (reverse glob('/usr/lib/xen-*/bin/pygrub
+                                           /usr/lib/xen-default/bin/pygrub
+                                           /usr/*bin/pygrub')) {
+      if (-x $pygrub_path) {
+        $pygrub_bin = $pygrub_path;
+        last;
+      }
+    }
+
+    die "pygrub not found" unless $pygrub_bin;
+
+    $OUT .= "bootloader = '$pygrub_bin'\n";
+  }
+}
+vcpus       = '{$vcpus}'
 memory      = '{$memory}'
 
 #
 #  Disk device(s).
 #
-{ 
-  for ( my $i = 0; $i <= $#PARTITIONS; $i++ )
+{
+  if ( !defined($image_vbd ) )
   {
+    for ( my $i = $#PARTITIONS; $i >= 0 ; $i-- )
+    {
       if ( $PARTITIONS[$i]{'mountpoint'} eq '/' )
       {
           $OUT .= "root        = '/dev/$device" . ($i + 1) . " ro'\n";
       }
-  }
-  $OUT .= "disk        = [\n";
-  for ( my $i = 0; $i <= $#PARTITIONS; $i++ )
-  {
+    }
+    $OUT .= "disk        = [\n";
+    for ( my $i = $#PARTITIONS; $i >= 0 ; $i-- )
+    {
       $OUT .= "                  '$PARTITIONS[$i]{'imagetype'}$PARTITIONS[$i]{'image'},$device" . ( $i + 1 ) .",w',\n";
+    }
+    $OUT .= "              ]\n";
   }
-  $OUT .= "              ]\n";
+}
+
+#
+#  Physical volumes
+#
+{
+    if ( $image_vbd )
+    {
+        $OUT .= "root        = '/dev/$device" . "2 ro'\n";
+        $OUT .= "disk        = [\n";
+        $OUT .= "                  '$image_vbd," . $device . "2,w',\n";
+
+        if ( $swap_vbd )
+        {
+            $OUT .= "                  '$swap_vbd," . $device . "1,w',\n";
+        }
+        $OUT .= "              ]\n";
+    }
 }
 
 #
@@ -52,12 +92,26 @@ name        = '{$hostname}'
     # Setup the mac address, if present.
     my $m = '';
     if ( $mac )
-    { 
+    {
       $m = "mac=$mac"
     }
-
-    $OUT .= "vif         = [ '$m' ]";
-  }    
+    my $br = '';
+    if ( $bridge )
+    {
+      if ( $mac )
+      {
+        $br = ",bridge=$bridge"
+      }
+      else
+      {
+        $br = "bridge=$bridge"
+      }
+    }
+    $OUT .= "vif         = [ '";
+    $OUT .= "$m";
+    $OUT .= "$br";
+    $OUT .= "' ]";
+  }
   else
   {
     #
@@ -65,12 +119,27 @@ name        = '{$hostname}'
     #
     my $m = '';
     if ( $mac )
-    { 
+    {
       $m = ",mac=$mac"
     }
 
-    $OUT .= "vif         = [ 'ip=$ip1"; 
-    $OUT .= "$m' ]";
+    my $vn = '';
+    if ( $vifname )
+    {
+      $vn = ",vifname=$vifname";
+    }
+
+    my $br = '';
+    if ( $bridge )
+    {
+      $br = ",bridge=$bridge"
+    }
+
+    $OUT .= "vif         = [ 'ip=$ip1";
+    $OUT .= "$m";
+    $OUT .= "$vn";
+    $OUT .= "$br";
+    $OUT .= "' ]";
   }
 }
 

hooks/centos-4/15-setup-arch

@@ -0,0 +1,44 @@
+#!/bin/sh
+
+prefix=$1
+
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+#  Record arch, if present.
+#
+if [ -d $prefix/etc/rpm ]; then
+
+    logMessage Found /etc/rpm
+
+    #
+    #  If i386 then record this
+    #
+    if [ "$arch" = "i386" ]; then
+        echo "i386-fedora-linux-gnu" >> $prefix/etc/rpm/platform
+    fi
+else
+
+    logMessage Failed to find /etc/rpm
+
+fi
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished
+

hooks/centos-4/20-setup-yum

@@ -26,11 +26,6 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  DNS is probably required to run "yum update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
 #
 # Update yum
 #

hooks/centos-4/30-disable-gettys

@@ -31,7 +31,7 @@ logMessage Script $0 starting
 #
 # Do the transformation.
 #
-sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' ${prefix}/etc/inittab
+sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' -e 's/tty1$/hvc0/' ${prefix}/etc/inittab
 
 
 #

hooks/centos-4/40-setup-networking

@@ -73,12 +73,26 @@ E_O_STATIC
          interface=`expr $interface + 1`
      done
 
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 else
     cat <<E_O_DHCP >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
 DEVICE=eth0
 BOOTPROTO=dhcp
 ONBOOT=yes
 E_O_DHCP
+    chroot ${prefix} /usr/bin/yum -y install dhclient
 fi
 
 

hooks/centos-4/50-setup-hostname

@@ -31,7 +31,7 @@ logMessage Script $0 starting
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} > ${prefix}/etc/hostname
+echo ${hostname} | sed 's/^\([^\.]*\)\..*/\1/' > ${prefix}/etc/hostname
 echo ${hostname} > ${prefix}/etc/mailname
 
 
@@ -89,23 +89,27 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        if [ -z "${nohosts}" ]; then
 
-        echo "${ip1}    ${name}    ${hostname}" >> /etc/hosts
+            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+
+            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
 
-        #
-        #  If we've updated the /etc/hosts file on the host machine
-        # and there is an installation of dnsmasq installed then
-        # reload it.
-        #
-        #  This will let the local LAN clients lookup the new address.
-        #
-        if [ -x /usr/sbin/dnsmasq ] ; then
-            if [ -e /var/run/dnsmasq.pid ]; then
 
-                logMessage Allowing DNSMasq to restart.
-                kill -HUP `cat /var/run/dnsmasq.pid`
+            #
+            #  If we've updated the /etc/hosts file on the host machine
+            # and there is an installation of dnsmasq installed then
+            # reload it.
+            #
+            #  This will let the local LAN clients lookup the new address.
+            #
+            if [ -x /usr/sbin/dnsmasq ] ; then
+                if [ -e /var/run/dnsmasq.pid ]; then
+
+                    logMessage Allowing DNSMasq to restart.
+                    kill -s HUP `cat /var/run/dnsmasq.pid`
+                fi
             fi
         fi
     fi

hooks/centos-4/75-fixup-securetty

@@ -30,7 +30,7 @@ logMessage Script $0 starting
 # If the file doesn't exist exit early.
 #
 if [ ! -e ${prefix}/etc/securetty ]; then
-    logMesage /etc/securetty not found.
+    logMessage /etc/securetty not found.
     exit
 fi
 

hooks/centos-4/90-make-fstab

@@ -36,15 +36,19 @@ logMessage Filesystem options are ${options}
 #
 # Find the root device.
 #
-#  1.  default to sda.
+#  1.  default to xvda.
 #
 #  2.  If --ide is specified use hda.
 #
-#  3.  Otherwise use a named $disk_device
+#  3.  If --scsi is specified use sda.
 #
-device=sda
+#  4.  Otherwise use a named $disk_device
+#
+device=xvda
 if [ "${ide}" ]; then
     device=hda
+elif [ "${scsi}" ]; then
+    device=sda
 else
     if [ ! -z "${disk_device}" ]; then
         device=`basename $disk_device`
@@ -59,11 +63,13 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
+devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -75,7 +81,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-    
+
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -83,8 +89,11 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
-    
+
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else
@@ -103,6 +112,9 @@ done
 #if [ $has_reiserfs -eq 1 ]; then
 #    installDebianPackage ${prefix} reiserfsprogs
 #fi
+#if [ $has_btrfs -eq 1 ]; then
+#    installDebianPackage ${prefix} btrfs-tools
+#fi
 
 
 #

hooks/centos-5/15-setup-arch

@@ -0,0 +1,44 @@
+#!/bin/sh
+
+prefix=$1
+
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+#  Record arch, if present.
+#
+if [ -d $prefix/etc/rpm ]; then
+
+    logMessage Found /etc/rpm
+
+    #
+    #  If i386 then record this
+    #
+    if [ "$arch" = "i386" ]; then
+        echo "i386-fedora-linux-gnu" >> $prefix/etc/rpm/platform
+    fi
+else
+
+    logMessage Failed to find /etc/rpm
+
+fi
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished
+

hooks/centos-5/20-setup-yum

@@ -26,12 +26,6 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  DNS is probably required to run "yum update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Update yum
 #

hooks/centos-5/30-disable-gettys

@@ -31,7 +31,7 @@ logMessage Script $0 starting
 #
 # Do the transformation.
 #
-sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' ${prefix}/etc/inittab
+sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' -e 's/tty1$/hvc0/' ${prefix}/etc/inittab
 
 
 #

hooks/centos-5/40-setup-networking

@@ -73,12 +73,26 @@ E_O_STATIC
          interface=`expr $interface + 1`
      done
 
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 else
     cat <<E_O_DHCP >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
 DEVICE=eth0
 BOOTPROTO=dhcp
 ONBOOT=yes
 E_O_DHCP
+    chroot ${prefix} /usr/bin/yum -y install dhclient
 fi
 
 

hooks/centos-5/50-setup-hostname

@@ -31,7 +31,7 @@ logMessage Script $0 starting
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} > ${prefix}/etc/hostname
+echo ${hostname} | sed 's/^\([^\.]*\)\..*/\1/' > ${prefix}/etc/hostname
 echo ${hostname} > ${prefix}/etc/mailname
 
 
@@ -89,23 +89,24 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        if [ -z "${nohosts}" ]; then
 
-        echo "${ip1}    ${name}    ${hostname}" >> /etc/hosts
+            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
+           #
+           #  If we've updated the /etc/hosts file on the host machine
+           # and there is an installation of dnsmasq installed then
+           # reload it.
+           #
+           #  This will let the local LAN clients lookup the new address.
+           #
+            if [ -x /usr/sbin/dnsmasq ] ; then
+                if [ -e /var/run/dnsmasq.pid ]; then
 
-        #
-        #  If we've updated the /etc/hosts file on the host machine
-        # and there is an installation of dnsmasq installed then
-        # reload it.
-        #
-        #  This will let the local LAN clients lookup the new address.
-        #
-        if [ -x /usr/sbin/dnsmasq ] ; then
-            if [ -e /var/run/dnsmasq.pid ]; then
-
-                logMessage Allowing DNSMasq to restart.
-                kill -HUP `cat /var/run/dnsmasq.pid`
+                    logMessage Allowing DNSMasq to restart.
+                    kill -s HUP `cat /var/run/dnsmasq.pid`
+                fi
             fi
         fi
     fi

hooks/centos-5/75-fixup-securetty

@@ -30,7 +30,7 @@ logMessage Script $0 starting
 # If the file doesn't exist exit early.
 #
 if [ ! -e ${prefix}/etc/securetty ]; then
-    logMesage /etc/securetty not found.
+    logMessage /etc/securetty not found.
     exit
 fi
 

hooks/centos-5/90-make-fstab

@@ -37,15 +37,19 @@ logMessage Filesystem options are ${options}
 #
 # Find the root device.
 #
-#  1.  default to sda.
+#  1.  default to xvda.
 #
 #  2.  If --ide is specified use hda.
 #
-#  3.  Otherwise use a named $disk_device
+#  3.  If --scsi is specified use sda.
 #
-device=sda
+#  4.  Otherwise use a named $disk_device
+#
+device=xvda
 if [ "${ide}" ]; then
     device=hda
+elif [ "${scsi}" ]; then
+    device=sda
 else
     if [ ! -z "${disk_device}" ]; then
         device=`basename $disk_device`
@@ -60,6 +64,7 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
@@ -85,6 +90,9 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
     
     if [ "${partdata2}" = "swap" ]; then
@@ -105,6 +113,9 @@ done
 #if [ $has_reiserfs -eq 1 ]; then
 #    installDebianPackage ${prefix} reiserfsprogs
 #fi
+#if [ $has_btrfs -eq 1 ]; then
+#    installDebianPackage ${prefix} btrfs-tools
+#fi
 
 
 #

hooks/common.sh

@@ -12,7 +12,7 @@
 # might develop.
 #
 # Steve
-# -- 
+# --
 #
 
 
@@ -85,7 +85,7 @@ installDebianPackage ()
     #
     #  Use policy-rc to stop any daemons from starting.
     #
-    echo -e '#!/bin/bash\nexit 101\n' > ${prefix}/usr/sbin/policy-rc.d
+    printf '#!/bin/sh\nexit 101\n' > ${prefix}/usr/sbin/policy-rc.d
     chmod +x ${prefix}/usr/sbin/policy-rc.d
 
     #
@@ -130,7 +130,7 @@ disableStartStopDaemon ()
    chmod 755 "${daemonfile}"
    logMessage "start-stop-daemon disabled / made a stub."
 }
- 
+
 
 
 #
@@ -151,7 +151,7 @@ enableStartStopDaemon ()
    fi
 
 }
- 
+
 
 
 #
@@ -182,7 +182,7 @@ removeDebianPackage ()
     #
     # Purge the packages we've been given.
     #
-    chroot ${prefix} /usr/bin/apt-get remove --purge "$@"
+    chroot ${prefix} /usr/bin/apt-get remove --yes --purge "$@"
 
 }
 
@@ -218,6 +218,28 @@ installCentOS4Package ()
 }
 
 
+
+#
+#  Install a package using whatever package management tool is available
+#
+installPackage ()
+{
+        prefix=$1
+        package=$2
+
+        if [ -x ${prefix}/usr/bin/apt-get ] ; then
+                installDebianPackage "$@"
+
+        elif [ -x ${prefix}/usr/bin/yum ] ; then
+                installCentOS4Package "$@"
+
+        else
+                logMessage "Unable to install package ${package}; no package manager found"
+        fi
+}
+
+
+
 #
 #  Install a package upon a gentoo system via emerge.
 #
@@ -232,7 +254,7 @@ installGentooPackage ()
     # Log our options
     #
     logMessage "Installing Gentoo package ${package} to prefix ${prefix}"
-    
+
     logMessage "NOTE: Not doing anything - this is a stub - FIXME"
 
 }

hooks/dapper/20-setup-apt

@@ -28,36 +28,19 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  You will probably need DNS to run "apt-get update"
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Attempt to auto-magically detect the use of a Proxy for apt-get, and
-# replicate that setup in our new guest.
+# replicate that setup in our new guest via apt-config dump and save
+# the setting to the proxy guess file.
 #
+logMessage The use of a proxy detected.
+apt-config dump | grep -i Acquire::HTTP::Proxy \
+    > ${prefix}/etc/apt/apt.conf.d/proxy-guess
+
+
 #
-#  Process any of the present apt-conf setup lines.
+# Setup the sources.list file for new installations of Ubuntu GNU/Linux.
 #
-for i in /etc/apt/apt.conf /etc/apt/apt.conf.d/* ; do 
-
-    #
-    # If the file exists.  (Need this in case the literal glob fails.)
-    #
-    if [ -e $i ] ; then
-
-        #
-        # Save the matching line(s) to the proxy guess file.
-        #
-        logMessage The use of a proxy detected.
-        grep -i HTTP::Proxy $i >> ${prefix}/etc/apt/apt.conf.d/proxy-guess
-    fi
-done
-
-
-
 cat <<E_O_APT > ${prefix}/etc/apt/sources.list
 #
 #  /etc/apt/sources.list

hooks/dapper/30-disable-gettys

@@ -28,7 +28,7 @@ logMessage Script $0 starting
 #
 # Switch off the gettys for everything other than tty1.
 #
-sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' ${prefix}/etc/inittab
+sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' -e 's/tty1$/hvc0/' ${prefix}/etc/inittab
 
 
 #

hooks/dapper/40-setup-networking

@@ -112,6 +112,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/dapper/50-setup-hostname

@@ -27,37 +27,47 @@ fi
 #
 logMessage Script $0 starting
 
+#
+#  Determine the FQDN and Hostname
+#
+GUEST_FQDN=${hostname}
+GUEST_HOSTNAME=`echo $GUEST_FQDN | awk -F'.' '{print $1}'`
 
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
+echo $GUEST_HOSTNAME > ${prefix}/etc/hostname
+echo $GUEST_FQDN > ${prefix}/etc/mailname
 
 
 #
 #  Fixup the /etc/hosts file upon the new image for
 # machines with static IPs
 #
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-    echo "${ip1}    ${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
+if [ -z "${copyhosts}" ]; then
     #
-    #  Stub /etc/hosts for DHCP clients.
+    #  Copy localhost
     #
+    cat > ${prefix}/etc/hosts <<EOF
+127.0.0.1    localhost
+EOF
+    #
+    #  Make sure our hostname and FQDN is resolvable
+    #
+    if [ -z "${dhcp}" ]; then
+        #
+        #  If dhcp is diabled, FQDN should resolve to our IP
+        #
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    else
+        cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    fi
+
     cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1       localhost
 
 # The following lines are desirable for IPv6 capable hosts
 ::1     ip6-localhost ip6-loopback
@@ -69,7 +79,25 @@ ff02::3 ip6-allhosts
 
 EOF
 
+else
+    # Non-IPv6 stuff.
+    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
 
+    # New entry.
+    if [ -z "${dhcp}" ]; then
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    else
+    cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    fi
+
+    # IPv6 stuff.
+    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
 fi
 
 
@@ -78,35 +106,29 @@ fi
 #
 if [ -z "${dhcp}" ]; then
 
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
+    if ( grep $GUEST_FQDN /etc/hosts > /dev/null ) ; then
 
-        logMessage Host already has IP address for the host ${hostname}.
+        logMessage Host already has IP address for the host $GUEST_FQDN.
 
     else
+        if [ -z "${nohosts}" ]; then
 
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
+            logMessage Adding $GUEST_FQDN and $GUEST_HOSTNAME to /etc/hosts on the host
+            echo "${ip1}    $GUEST_FQDN $GUEST_HOSTNAME" >> /etc/hosts
 
-        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+            #
+            #  If we've updated the /etc/hosts file on the host machine
+            # and there is an installation of dnsmasq installed then
+            # reload it.
+            #
+            #  This will let the local LAN clients lookup the new address.
+            #
+            if [ -x /usr/sbin/dnsmasq ] ; then
+                if [ -e /var/run/dnsmasq.pid ]; then
 
-        echo "${ip1}    ${name}    ${hostname}" >> /etc/hosts
-
-
-        #
-        #  If we've updated the /etc/hosts file on the host machine
-        # and there is an installation of dnsmasq installed then
-        # reload it.
-        #
-        #  This will let the local LAN clients lookup the new address.
-        #
-        if [ -x /usr/sbin/dnsmasq ] ; then
-            if [ -e /var/run/dnsmasq.pid ]; then
-
-                logMessage Allowing DNSMasq to restart.
-
-                kill -HUP `cat /var/run/dnsmasq.pid`
+                    logMessage Allowing DNSMasq to restart.
+                    kill -s HUP `cat /var/run/dnsmasq.pid`
+                fi
             fi
         fi
     fi

hooks/dapper/60-copy-host-files

@@ -28,28 +28,7 @@ logMessage Script $0 starting
 # Copy "required" files from our host.
 #
 cp /etc/timezone    ${prefix}/etc
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
+cp /etc/localtime   ${prefix}/etc
 
 
 #

hooks/dapper/70-install-ssh

@@ -1,18 +1,17 @@
 #!/bin/sh
 #
-#  This script installs OpenSSH upon the new system.
+#  This script installs OpenSSH Server on the newly created guest.
 #
-#  It must make sure that the server is not running before it exits 
-# otherwise the temporary mounted directory will not be unmountable.
+#  It does this by generating the keys within the host, since guests
+# do not have the necessary /dev/random and /dev/urandom to generate
+# their own keys before boot.
 #
-# Steve
+# Dmitry Nedospasov
 # --
-# http://www.steve.org.uk/
-
+# http://nedos.net/
 
 prefix=$1
 
-
 #
 #  Source our common functions
 #
@@ -22,21 +21,43 @@ else
     . ./hooks/common.sh
 fi
 
-
 #
 # Log our start
 #
 logMessage Script $0 starting
 
+#
+#  Since our guests doesn't have an RNG, generate the keys from the host
+#
+#  First, create an ssh directory
+#
+mkdir -p ${prefix}/etc/ssh
+
+#
+#  Second, Generate the Host RSA Key
+#
+if ssh-keygen -t rsa -N "" -f ${prefix}/etc/ssh/ssh_host_rsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host RSA"
+else
+    logMessage "failed to generate Host RSA Key"
+fi
+
+#
+#  Third, Generate the Host DSA Key
+#
+if ssh-keygen -t dsa -N "" -f ${prefix}/etc/ssh/ssh_host_dsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host DSA"
+else
+    logMessage "failed to generate Host DSA Key"
+fi
 
 #
 #  Install ssh
 #
-installDebianPackage ${prefix} ssh
-
-
+installDebianPackage ${prefix} openssh-server
 
 #
-#  Log our finish
+# Log our finish
 #
 logMessage Script $0 finished
+

hooks/dapper/75-fixup-securetty

@@ -30,7 +30,7 @@ logMessage Script $0 starting
 # If the file doesn't exist exit early.
 #
 if [ ! -e ${prefix}/etc/securetty ]; then
-    logMesage /etc/securetty not found.
+    logMessage /etc/securetty not found.
     exit
 fi
 

hooks/dapper/90-make-fstab

@@ -33,15 +33,19 @@ logMessage Script $0 starting
 #
 # Find the root device.
 #
-#  1.  default to sda.
+#  1.  default to xvda.
 #
 #  2.  If --ide is specified use hda.
 #
-#  3.  Otherwise use a named $disk_device
+#  3.  If --scsi is specified use sda.
 #
-device=sda
+#  4.  Otherwise use a named $disk_device
+#
+device=xvda
 if [ "${ide}" ]; then
     device=hda
+elif [ "${scsi}" ]; then
+    device=sda
 else
     if [ ! -z "${disk_device}" ]; then
         device=`basename $disk_device`
@@ -56,11 +60,13 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
+devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -72,7 +78,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-    
+
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -80,8 +86,11 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
-    
+
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else
@@ -100,6 +109,9 @@ fi
 if [ $has_reiserfs -eq 1 ]; then
     installDebianPackage ${prefix} reiserfsprogs
 fi
+if [ $has_btrfs -eq 1 ]; then
+    installDebianPackage ${prefix} btrfs-tools
+fi
 
 
 #

hooks/debian/15-disable-hwclock

@@ -29,23 +29,10 @@ logMessage Script $0 starting
 #
 #  Disable the startup scripts from all runlevels.
 #
-if [ -x ${prefix}/etc/init.d/hwclock.sh ]; then
-
-    chmod -x ${prefix}/etc/init.d/hwclock.sh
-else
-
-    logMessage "/etc/init.d/hwclock.sh not found.  skipping."
-fi
-if [ -x ${prefix}/etc/init.d/hwclockfirst.sh ]; then
-
-    chmod -x ${prefix}/etc/init.d/hwclockfirst.sh
-else
-
-    logMessage "/etc/init.d/hwclockfirst.sh not found.  skipping."
-fi
-
+chroot ${prefix} /usr/sbin/update-rc.d -f hwclock.sh remove
 
 #
 # Log our finish
 #
-logMessage Script $0 finished.
+logMessage Script $0 finished.
+

hooks/debian/20-setup-apt

@@ -27,34 +27,14 @@ fi
 logMessage Script $0 starting
 
 
-#
-# You'll probably need DNS to run "apt-get update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Attempt to auto-magically detect the use of a Proxy for apt-get, and
-# replicate that setup in our new guest.
+# replicate that setup in our new guest via apt-config dump and save
+# the setting to the proxy guess file.
 #
-#
-#  Process any of the present apt-conf setup lines.
-#
-for i in /etc/apt/apt.conf /etc/apt/apt.conf.d/* ; do 
-
-    #
-    # If the file exists.  (Need this in case the literal glob fails.)
-    #
-    if [ -e $i ] ; then
-
-        #
-        # Save the matching line(s) to the proxy guess file.
-        #
-        logMessage The use of a proxy detected.
-        grep -i HTTP::Proxy $i >> ${prefix}/etc/apt/apt.conf.d/proxy-guess
-    fi
-done
-
+logMessage The use of a proxy detected.
+apt-config dump | grep -i Acquire::HTTP::Proxy \
+    > ${prefix}/etc/apt/apt.conf.d/proxy-guess
 
 
 #
@@ -76,9 +56,12 @@ E_O_APT
 
 
 #
-#  If the host system has security support then enable that here too.
+#  If the host system has security support then enable that here, too,
+#  except if we're installing Debian Unstable.
 #
-if ( grep ^deb.*security.debian.org /etc/apt/sources.list >/dev/null 2>/dev/null ) ; then
+if ( test "${dist}" "!=" "sid" && test "${dist}" "!=" "unstable" && \
+     test -e /etc/apt/sources.list && \
+     grep ^deb.*security -r /etc/apt/sources.list /etc/apt/sources.list.d >/dev/null 2>/dev/null ) ; then
 
     cat <<E_O_APT >> ${prefix}/etc/apt/sources.list
 # 

hooks/debian/30-disable-gettys

@@ -31,7 +31,7 @@ logMessage Script $0 starting
 #
 # Do the transformation.
 #
-sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' ${prefix}/etc/inittab
+sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' -e 's/tty1$/hvc0/' ${prefix}/etc/inittab
 
 
 #

hooks/debian/40-setup-networking

@@ -82,7 +82,7 @@ setupStaticNetworking ()
     #
     bcast='';
     if [ ! -z "${broadcast}" ]; then
-      bcast=' broadcast ${broadcast}'
+      bcast=" broadcast ${broadcast}"
     fi
 
     #
@@ -132,6 +132,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/debian/50-setup-hostname

@@ -27,37 +27,47 @@ fi
 #
 logMessage Script $0 starting
 
+#
+#  Determine the FQDN and Hostname
+#
+GUEST_FQDN=${hostname}
+GUEST_HOSTNAME=`echo $GUEST_FQDN | awk -F'.' '{print $1}'`
 
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
+echo $GUEST_HOSTNAME > ${prefix}/etc/hostname
+echo $GUEST_FQDN > ${prefix}/etc/mailname
 
 
 #
 #  Fixup the /etc/hosts file upon the new image for
 # machines with static IPs
 #
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-    echo "${ip1}    ${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
+if [ -z "${copyhosts}" ]; then
     #
-    #  Stub /etc/hosts for DHCP clients.
+    #  Copy localhost
     #
+    cat > ${prefix}/etc/hosts <<EOF
+127.0.0.1    localhost
+EOF
+    #
+    #  Make sure our hostname and FQDN is resolvable
+    #
+    if [ -z "${dhcp}" ]; then
+        #
+        #  If dhcp is diabled, FQDN should resolve to our IP
+        #
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    else
+        cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    fi
+
     cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1       localhost
 
 # The following lines are desirable for IPv6 capable hosts
 ::1     ip6-localhost ip6-loopback
@@ -69,7 +79,25 @@ ff02::3 ip6-allhosts
 
 EOF
 
+else
+    # Non-IPv6 stuff.
+    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
 
+    # New entry.
+    if [ -z "${dhcp}" ]; then
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    else
+    cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    fi
+
+    # IPv6 stuff.
+    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
 fi
 
 
@@ -78,34 +106,29 @@ fi
 #
 if [ -z "${dhcp}" ]; then
 
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
+    if ( grep $GUEST_FQDN /etc/hosts > /dev/null ) ; then
 
-        logMessage Host already has IP address for the host ${hostname}.
+        logMessage Host already has IP address for the host $GUEST_FQDN.
 
     else
+        if [ -z "${nohosts}" ]; then
 
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
+            logMessage Adding $GUEST_FQDN and $GUEST_HOSTNAME to /etc/hosts on the host
+            echo "${ip1}    $GUEST_FQDN $GUEST_HOSTNAME" >> /etc/hosts
 
-        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+            #
+            #  If we've updated the /etc/hosts file on the host machine
+            # and there is an installation of dnsmasq installed then
+            # reload it.
+            #
+            #  This will let the local LAN clients lookup the new address.
+            #
+            if [ -x /usr/sbin/dnsmasq ] ; then
+                if [ -e /var/run/dnsmasq.pid ]; then
 
-        echo "${ip1}    ${name}    ${hostname}" >> /etc/hosts
-
-        #
-        #  If we've updated the /etc/hosts file on the host machine
-        # and there is an installation of dnsmasq installed then
-        # reload it.
-        #
-        #  This will let the local LAN clients lookup the new address.
-        #
-        if [ -x /usr/sbin/dnsmasq ] ; then
-            if [ -e /var/run/dnsmasq.pid ]; then
-
-                logMessage Allowing DNSMasq to restart.
-
-                kill -HUP `cat /var/run/dnsmasq.pid`
+                    logMessage Allowing DNSMasq to restart.
+                    kill -s HUP `cat /var/run/dnsmasq.pid`
+                fi
             fi
         fi
     fi

hooks/debian/55-create-dev

@@ -26,6 +26,19 @@ fi
 #
 logMessage Script $0 starting
 
+#
+# Test where MAKEDEV is located, assuming /sbin/ as default
+#
+MAKEDEV=''
+MAKEDEV_PATHS="/sbin/MAKEDEV /dev/MAKEDEV"
+for MAKEDEV_PATH in ${MAKEDEV_PATHS}; do
+    if [ -x "${prefix}${MAKEDEV_PATH}" ]; then
+    MAKEDEV="${prefix}${MAKEDEV_PATH}"
+    break
+    fi
+done
+
+if [ -n "${MAKEDEV}" ]; then
 
 #
 # Early termination if we have a couple of common devices present
@@ -36,10 +49,10 @@ if ( test `ls -1 ${prefix}/dev | wc -l` -gt 10 ); then
     # We still need to make sure the basic devices are present
     #
     cd ${prefix}/dev
-    ./MAKEDEV std
-    ./MAKEDEV hda
-    ./MAKEDEV sda
-    ./MAKEDEV tty1
+    ${MAKEDEV} std
+    ${MAKEDEV} hda
+    ${MAKEDEV} sda
+    ${MAKEDEV} tty1
 
     logMessage "Terminating because there appear to be files in /dev already"
     exit
@@ -50,9 +63,10 @@ fi
 #  Make the device nodes.
 #
 cd ${prefix}/dev
-./MAKEDEV generic
-./MAKEDEV std
+${MAKEDEV} generic
+${MAKEDEV} std
 
+fi # -n ${MAKEDEV}
 
 #
 #  Log our finish

hooks/debian/60-copy-host-files

@@ -28,29 +28,7 @@ logMessage Script $0 starting
 # Copy "required" files from our host.
 #
 cp /etc/timezone    ${prefix}/etc
-
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
+cp /etc/localtime   ${prefix}/etc
 
 
 #

hooks/debian/70-install-ssh

@@ -1,18 +1,17 @@
 #!/bin/sh
 #
-#  This script installs OpenSSH upon the new system.
+#  This script installs OpenSSH Server on the newly created guest.
 #
-#  It must make sure that the server is not running before it exits 
-# otherwise the temporary mounted directory will not be unmountable.
+#  It does this by generating the keys within the host, since guests
+# do not have the necessary /dev/random and /dev/urandom to generate
+# their own keys before boot.
 #
-# Steve
+# Dmitry Nedospasov
 # --
-# http://www.steve.org.uk/
-
+# http://nedos.net/
 
 prefix=$1
 
-
 #
 #  Source our common functions
 #
@@ -22,20 +21,43 @@ else
     . ./hooks/common.sh
 fi
 
-
 #
 # Log our start
 #
 logMessage Script $0 starting
 
+#
+#  Since our guests doesn't have an RNG, generate the keys from the host
+#
+#  First, create an ssh directory
+#
+mkdir -p ${prefix}/etc/ssh
+
+#
+#  Second, Generate the Host RSA Key
+#
+if ssh-keygen -t rsa -N "" -f ${prefix}/etc/ssh/ssh_host_rsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host RSA"
+else
+    logMessage "failed to generate Host RSA Key"
+fi
+
+#
+#  Third, Generate the Host DSA Key
+#
+if ssh-keygen -t dsa -N "" -f ${prefix}/etc/ssh/ssh_host_dsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host DSA"
+else
+    logMessage "failed to generate Host DSA Key"
+fi
 
 #
 #  Install ssh
 #
-installDebianPackage ${prefix} ssh
-
+installDebianPackage ${prefix} openssh-server
 
 #
-#  Log our finish
+# Log our finish
 #
 logMessage Script $0 finished
+

hooks/debian/75-fixup-securetty

@@ -30,7 +30,7 @@ logMessage Script $0 starting
 # If the file doesn't exist exit early.
 #
 if [ ! -e ${prefix}/etc/securetty ]; then
-    logMesage /etc/securetty not found.
+    logMessage /etc/securetty not found.
     exit
 fi
 

hooks/debian/80-install-kernel

@@ -0,0 +1,137 @@
+#!/bin/sh
+#
+#  If the pygrub flag is set, this script will install the necessary
+# packages to boot the VM from the dom0 via pygrub. This script installs
+# the kernel and modules and generates a grub menu.lst in the newly
+# created maschine.
+#
+# Dmitry Nedospasov
+# --
+# http://nedos.net
+
+prefix=$1
+
+#
+#  Source our common functions
+#
+
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+if [ "${pygrub}" ]; then
+#
+# Log our start
+#
+
+logMessage Script $0 starting
+
+#
+# Resolve the correct architecutre
+#
+
+if [ "${arch}" = "i386" ]; then
+    XEN_ARCH="686"
+elif [ "${arch}" = "amd64" ]; then
+    XEN_ARCH="amd64"
+elif [ -z "${arch}" ]; then
+    UNAME_ARCH=`uname -m`
+    if [ "${UNAME_ARCH}" = "i686" ]; then
+        XEN_ARCH="686"
+    elif [ "${UNAME_ARCH}" = "x86_64" ]; then
+        XEN_ARCH="amd64"
+    else
+        logMessage Unknown kernel architecture ${UNAME_ARCH}.
+        logMessage Please report this as bug to xen-tools-dev@xen-tools.org.
+        logMessage Script $0 failed
+        exit 1
+    fi
+else
+    logMessage Unknown kernel architecture ${arch}
+    logMessage Script $0 failed
+    exit 1
+fi
+
+#
+# Attempt to install a xen kernel, if that fails, then install a normal one
+#
+
+KERNEL_XEN_PKG="linux-image-xen-$XEN_ARCH"
+KERNEL_PKG="linux-image-$XEN_ARCH"
+
+logMessage Attempting to install the $KERNEL_XEN_PKG kernel image
+if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_XEN_PKG > /dev/null 2>&1; then
+    logMessage Package $KERNEL_XEN_PKG is available - installing
+    installDebianPackage ${prefix} initramfs-tools
+    installDebianPackage ${prefix} $KERNEL_XEN_PKG
+
+else
+    logMessage Package $KERNEL_XEN_PKG is not available
+    logMessage Attempting to install the $KERNEL_PKG kernel image
+    logMessage WARNING: This kernel may not have pvops
+    if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_PKG > /dev/null 2>&1; then
+        logMessage Package $KERNEL_PKG is available - installing
+        installDebianPackage ${prefix} initramfs-tools
+        installDebianPackage ${prefix} $KERNEL_PKG
+    else
+        logMessage Package $KERNEL_PKG is not available
+        logMessage pygrub set, but kernel could not be installed
+        logMessage Script $0 failed
+        exit 1
+    fi
+fi
+
+DOMU_KERNEL=$(basename $(ls -1 ${prefix}/boot/vmlinuz* | tail -n 1))
+KERNEL_REV=$(echo $DOMU_KERNEL | sed "s/vmlinuz-//g")
+DOMU_RAMDISK="initrd.img-$KERNEL_REV"
+DOMU_ISSUE=$(sed -re "s/ *\\\.*//g" -e1q < ${prefix}/etc/issue)
+
+#
+# Generate initrd if it does not exist
+#
+
+if [ -f ${prefix}/boot/$DOMU_RAMDISK ]; then
+    logMessage initrd exists, skipping generation
+else
+    logMessage initrd missing, generating
+    chroot ${prefix} update-initramfs -c -k $KERNEL_REV
+fi
+
+#
+# Generate a menu.lst for pygrub
+#
+
+mkdir -p ${prefix}/boot/grub
+cat << E_O_MENU > ${prefix}/boot/grub/menu.lst
+default         0
+timeout         2
+
+title           $DOMU_ISSUE
+root            (hd0,0)
+kernel          /boot/$DOMU_KERNEL root=/dev/xvda2 ro 
+initrd          /boot/$DOMU_RAMDISK
+
+title           $DOMU_ISSUE (Single-User)
+root            (hd0,0)
+kernel          /boot/$DOMU_KERNEL root=/dev/xvda2 ro single
+initrd          /boot/$DOMU_RAMDISK
+
+E_O_MENU
+
+#
+#  Install the module-init-tools package.
+#
+
+installDebianPackage ${prefix} module-init-tools
+
+else
+    logMessage pygrub not set, skipping kernel install
+fi # if pygrub
+
+#
+#  Log our finish
+#
+
+logMessage Script $0 finished

hooks/debian/80-install-modules

@@ -31,7 +31,9 @@ fi
 #
 logMessage Script $0 starting
 
-
+if [ ${pygrub} ]; then
+    logMessage "pygrub set, skipping module install"
+else
 #
 #  The name of the package containing the correct modules.
 #
@@ -76,6 +78,7 @@ fi
 #
 installDebianPackage ${prefix} module-init-tools
 
+fi # if pygrub
 
 #
 #  Log our finish

hooks/debian/90-make-fstab

@@ -32,15 +32,19 @@ logMessage Script $0 starting
 #
 # Find the root device.
 #
-#  1.  default to sda.
+#  1.  default to xvda.
 #
 #  2.  If --ide is specified use hda.
 #
-#  3.  Otherwise use a named $disk_device
+#  3.  If --scsi is specified use sda.
 #
-device=sda
+#  4.  Otherwise use a named $disk_device
+#
+device=xvda
 if [ "${ide}" ]; then
     device=hda
+elif [ "${scsi}" ]; then
+    device=sda
 else
     if [ ! -z "${disk_device}" ]; then
         device=`basename $disk_device`
@@ -55,11 +59,13 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
+devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -71,7 +77,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-    
+
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -79,8 +85,11 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
-    
+
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else
@@ -99,6 +108,9 @@ fi
 if [ $has_reiserfs -eq 1 ]; then
     installDebianPackage ${prefix} reiserfsprogs
 fi
+if [ $has_btrfs -eq 1 ]; then
+    installDebianPackage ${prefix} btrfs-tools
+fi
 
 
 #

hooks/debian/95-configure-locales

@@ -37,10 +37,10 @@ fi
 #
 installDebianPackage ${prefix} locales
 installDebianPackage ${prefix} util-linux-locales
-
+chroot ${prefix} /usr/sbin/update-locale LANG=C
 
 
 #
 # Log our finish
 #
-logMessage Script $0 finished.
+logMessage Script $0 finished.

hooks/edgy/20-setup-apt

@@ -28,36 +28,19 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  You will probably need DNS to run "apt-get update"
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
 #
 # Attempt to auto-magically detect the use of a Proxy for apt-get, and
-# replicate that setup in our new guest.
+# replicate that setup in our new guest via apt-config dump and save
+# the setting to the proxy guess file.
 #
+logMessage The use of a proxy detected.
+apt-config dump | grep -i Acquire::HTTP::Proxy \
+    > ${prefix}/etc/apt/apt.conf.d/proxy-guess
+
+
 #
-#  Process any of the present apt-conf setup lines.
+# Setup the sources.list file for new installations of Ubuntu GNU/Linux.
 #
-for i in /etc/apt/apt.conf /etc/apt/apt.conf.d/* ; do 
-
-    #
-    # If the file exists.  (Need this in case the literal glob fails.)
-    #
-    if [ -e $i ] ; then
-
-        #
-        # Save the matching line(s) to the proxy guess file.
-        #
-        logMessage The use of a proxy detected.
-        grep -i HTTP::Proxy $i >> ${prefix}/etc/apt/apt.conf.d/proxy-guess
-    fi
-done
-
-
-
 cat <<E_O_APT > ${prefix}/etc/apt/sources.list
 #
 #  /etc/apt/sources.list

hooks/edgy/30-disable-gettys

@@ -28,7 +28,9 @@ logMessage Script $0 starting
 #  Remove the links for upstart
 #
 rm ${prefix}/etc/event.d/tty[!1]
-
+sed -i -e s/tty1/hvc0/ ${prefix}/etc/event.d/tty1
+mv ${prefix}/etc/event.d/tty1 ${prefix}/etc/event.d/hvc0
+[ -f ${prefix}/etc/inittab ] && sed -i -e s/tty1/hvc0/ ${prefix}/etc/inittab
 
 #
 #  Are we using an alternative serial device?
@@ -38,11 +40,14 @@ if [ ! -z "${serial_device}" ]; then
     serial_device=`basename ${serial_device}`
 
     # Let the user know.
-    logMessage "Replacing default serial device (tty1) with ${serial_device}"
+    logMessage "Replacing default serial device (hvc0) with ${serial_device}"
 
     # replace existing device.
-    mv ${prefix}/etc/event.d/tty1  ${prefix}/etc/event.d/${serial_device}
-    sed -i -e s/tty1/${serial_device}/ ${prefix}/etc/inittab
+    mv ${prefix}/etc/event.d/hvc0  ${prefix}/etc/event.d/${serial_device}
+    sed -i -e s/hvc0/${serial_device}/ ${prefix}/etc/event.d/${serial_device}
+    [ -f ${prefix}/etc/inittab ] && sed -i -e s/hvc0/${serial_device}/ ${prefix}/etc/inittab
+
+
 
     # make sure that it is allowed to login.
     echo $serial_device >> ${prefix}/etc/securetty

hooks/edgy/40-setup-networking

@@ -72,7 +72,7 @@ setupStaticNetworking ()
     #
     bcast='';
     if [ ! -z "${broadcast}" ]; then
-      bcast=' broadcast ${broadcast}'
+      bcast=" broadcast ${broadcast}"
     fi
 
     #
@@ -121,6 +121,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/edgy/50-setup-hostname

@@ -27,37 +27,47 @@ fi
 #
 logMessage Script $0 starting
 
+#
+#  Determine the FQDN and Hostname
+#
+GUEST_FQDN=${hostname}
+GUEST_HOSTNAME=`echo $GUEST_FQDN | awk -F'.' '{print $1}'`
 
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
+echo $GUEST_HOSTNAME > ${prefix}/etc/hostname
+echo $GUEST_FQDN > ${prefix}/etc/mailname
 
 
 #
 #  Fixup the /etc/hosts file upon the new image for
 # machines with static IPs
 #
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-    echo "${ip1}    ${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
+if [ -z "${copyhosts}" ]; then
     #
-    #  Stub /etc/hosts for DHCP clients.
+    #  Copy localhost
     #
+    cat > ${prefix}/etc/hosts <<EOF
+127.0.0.1    localhost
+EOF
+    #
+    #  Make sure our hostname and FQDN is resolvable
+    #
+    if [ -z "${dhcp}" ]; then
+        #
+        #  If dhcp is diabled, FQDN should resolve to our IP
+        #
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    else
+        cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+EOF
+    fi
+
     cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1       localhost
 
 # The following lines are desirable for IPv6 capable hosts
 ::1     ip6-localhost ip6-loopback
@@ -69,7 +79,25 @@ ff02::3 ip6-allhosts
 
 EOF
 
+else
+    # Non-IPv6 stuff.
+    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
 
+    # New entry.
+    if [ -z "${dhcp}" ]; then
+        cat >> ${prefix}/etc/hosts <<EOF
+${ip1}    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    else
+    cat >> ${prefix}/etc/hosts <<EOF
+127.0.1.1    $GUEST_FQDN $GUEST_HOSTNAME
+
+EOF
+    fi
+
+    # IPv6 stuff.
+    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
 fi
 
 
@@ -78,33 +106,29 @@ fi
 #
 if [ -z "${dhcp}" ]; then
 
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
+    if ( grep $GUEST_FQDN /etc/hosts > /dev/null ) ; then
 
-        logMessage Host already has IP address for the host ${hostname}.
+        logMessage Host already has IP address for the host $GUEST_FQDN.
 
     else
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
+        if [ -z "${nohosts}" ]; then
 
-        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+            logMessage Adding $GUEST_FQDN and $GUEST_HOSTNAME to /etc/hosts on the host
+            echo "${ip1}    $GUEST_FQDN $GUEST_HOSTNAME" >> /etc/hosts
 
-        echo "${ip1}    ${name}    ${hostname}" >> /etc/hosts
+            #
+            #  If we've updated the /etc/hosts file on the host machine
+            # and there is an installation of dnsmasq installed then
+            # reload it.
+            #
+            #  This will let the local LAN clients lookup the new address.
+            #
+            if [ -x /usr/sbin/dnsmasq ] ; then
+                if [ -e /var/run/dnsmasq.pid ]; then
 
-        #
-        #  If we've updated the /etc/hosts file on the host machine
-        # and there is an installation of dnsmasq installed then
-        # reload it.
-        #
-        #  This will let the local LAN clients lookup the new address.
-        #
-        if [ -x /usr/sbin/dnsmasq ] ; then
-            if [ -e /var/run/dnsmasq.pid ]; then
-
-                logMessage Allowing DNSMasq to restart.
-
-                kill -HUP `cat /var/run/dnsmasq.pid`
+                    logMessage Allowing DNSMasq to restart.
+                    kill -s HUP `cat /var/run/dnsmasq.pid`
+                fi
             fi
         fi
     fi

hooks/edgy/60-copy-host-files

@@ -28,28 +28,7 @@ logMessage Script $0 starting
 # Copy "required" files from our host.
 #
 cp /etc/timezone    ${prefix}/etc
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
+cp /etc/localtime   ${prefix}/etc
 
 
 #

hooks/edgy/70-install-ssh

@@ -1,18 +1,17 @@
 #!/bin/sh
 #
-#  This script installs OpenSSH upon the new system.
+#  This script installs OpenSSH Server on the newly created guest.
 #
-#  It must make sure that the server is not running before it exits 
-# otherwise the temporary mounted directory will not be unmountable.
+#  It does this by generating the keys within the host, since guests
+# do not have the necessary /dev/random and /dev/urandom to generate
+# their own keys before boot.
 #
-# Steve
+# Dmitry Nedospasov
 # --
-# http://www.steve.org.uk/
-
+# http://nedos.net/
 
 prefix=$1
 
-
 #
 #  Source our common functions
 #
@@ -22,21 +21,43 @@ else
     . ./hooks/common.sh
 fi
 
-
 #
 # Log our start
 #
 logMessage Script $0 starting
 
+#
+#  Since our guests doesn't have an RNG, generate the keys from the host
+#
+#  First, create an ssh directory
+#
+mkdir -p ${prefix}/etc/ssh
+
+#
+#  Second, Generate the Host RSA Key
+#
+if ssh-keygen -t rsa -N "" -f ${prefix}/etc/ssh/ssh_host_rsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host RSA"
+else
+    logMessage "failed to generate Host RSA Key"
+fi
+
+#
+#  Third, Generate the Host DSA Key
+#
+if ssh-keygen -t dsa -N "" -f ${prefix}/etc/ssh/ssh_host_dsa_key -C "root@${hostname}"; then
+    logMessage "successfully generetaged Host DSA"
+else
+    logMessage "failed to generate Host DSA Key"
+fi
 
 #
 #  Install ssh
 #
-installDebianPackage ${prefix} ssh
-
-
+installDebianPackage ${prefix} openssh-server
 
 #
-#  Log our finish
+# Log our finish
 #
 logMessage Script $0 finished
+

hooks/edgy/75-fixup-securetty

@@ -30,7 +30,7 @@ logMessage Script $0 starting
 # If the file doesn't exist exit early.
 #
 if [ ! -e ${prefix}/etc/securetty ]; then
-    logMesage /etc/securetty not found.
+    logMessage /etc/securetty not found.
     exit
 fi
 

hooks/edgy/80-install-kernel

@@ -0,0 +1,112 @@
+#!/bin/sh
+#
+#  If the pygrub flag is set, this script will install the necessary
+# packages to boot the VM from the dom0 via pygrub. This script installs
+# the kernel and modules and generates a grub menu.lst in the newly
+# created maschine.
+#
+# Dmitry Nedospasov
+# --
+# http://nedos.net
+
+prefix=$1
+
+#
+#  Source our common functions
+#
+
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+#
+# Log our start
+#
+
+logMessage Script $0 starting
+
+if [ ${pygrub} ]; then
+
+#
+# Attempt to install a xen kernel, if that fails, then install a normal one
+#
+
+KERNEL_XEN_PKG="linux-image-xen"
+KERNEL_PKG="linux-image-server"
+
+logMessage Attempting to install the $KERNEL_XEN_PKG kernel image
+if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_XEN_PKG > /dev/null 2>&1; then
+    logMessage Package $KERNEL_XEN_PKG is available - installing
+    installDebianPackage ${prefix} initramfs-tools
+    installDebianPackage ${prefix} $KERNEL_XEN_PKG
+
+else
+    logMessage Package $KERNEL_XEN_PKG is not available
+    logMessage Attempting to install the $KERNEL_PKG kernel image
+    logMessage WARNING: This kernel may not have pvops
+    if chroot ${prefix} /usr/bin/apt-cache show $KERNEL_PKG > /dev/null 2>&1; then
+        logMessage Package $KERNEL_PKG is available - installing
+        installDebianPackage ${prefix} initramfs-tools
+        installDebianPackage ${prefix} $KERNEL_PKG
+    else
+        logMessage Package $KERNEL_PKG is not available
+        logMessage pygrub set, but kernel could not be installed
+        logMessage Script $0 failed
+        exit 1
+    fi
+fi
+
+DOMU_KERNEL=$(basename $(ls -1 ${prefix}/boot/vmlinuz* | tail -n 1))
+KERNEL_REV=$(echo $DOMU_KERNEL | sed "s/vmlinuz-//g")
+DOMU_RAMDISK="initrd.img-$KERNEL_REV"
+DOMU_ISSUE=$(sed -re "s/ *\\\.*//g" -e1q < ${prefix}/etc/issue)
+
+#
+# Generate initrd if it does not exist
+#
+
+if [ -f ${prefix}/boot/$DOMU_RAMDISK ]; then
+    logMessage initrd exists, skipping generation
+else
+    logMessage initrd missing, generating
+    chroot ${prefix} update-initramfs -c -k $KERNEL_REV
+fi
+
+#
+# Generate a menu.lst for pygrub
+#
+
+mkdir -p ${prefix}/boot/grub
+cat << E_O_MENU > ${prefix}/boot/grub/menu.lst
+default         0
+timeout         2
+
+title           $DOMU_ISSUE
+root            (hd0,0)
+kernel          /boot/$DOMU_KERNEL root=/dev/xvda2 ro 
+initrd          /boot/$DOMU_RAMDISK
+
+title           $DOMU_ISSUE (Single-User)
+root            (hd0,0)
+kernel          /boot/$DOMU_KERNEL root=/dev/xvda2 ro single
+initrd          /boot/$DOMU_RAMDISK
+
+E_O_MENU
+
+#
+#  Install the module-init-tools package.
+#
+
+installDebianPackage ${prefix} module-init-tools
+
+else
+    logMessage pygrub not set, skipping kernel install
+fi
+
+#
+#  Log our finish
+#
+
+logMessage Script $0 finished

hooks/edgy/80-install-modules

@@ -31,7 +31,9 @@ fi
 #
 logMessage Script $0 starting
 
-
+if [ ${pygrub} ]; then
+    logMessage "pygrub set, skipping module install"
+else
 #
 #  The name of the package containing the correct modules.
 #
@@ -71,12 +73,12 @@ else
     cp -au /lib/modules/$(uname -r) ${prefix}/lib/modules
 fi
 
-
 #
 #  Install the module-init-tools package.
 #
 installDebianPackage ${prefix} module-init-tools
 
+fi # if pygrub
 
 #
 #  Log our finish

hooks/edgy/90-make-fstab

@@ -33,15 +33,19 @@ logMessage Script $0 starting
 #
 # Find the root device.
 #
-#  1.  default to sda.
+#  1.  default to xvda.
 #
 #  2.  If --ide is specified use hda.
 #
-#  3.  Otherwise use a named $disk_device
+#  3.  If --scsi is specified use sda.
 #
-device=sda
+#  4.  Otherwise use a named $disk_device
+#
+device=xvda
 if [ "${ide}" ]; then
     device=hda
+elif [ "${scsi}" ]; then
+    device=sda
 else
     if [ ! -z "${disk_device}" ]; then
         device=`basename $disk_device`
@@ -56,11 +60,13 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
+devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -72,7 +78,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-    
+
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -80,8 +86,11 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
-    
+
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else
@@ -100,6 +109,9 @@ fi
 if [ $has_reiserfs -eq 1 ]; then
     installDebianPackage ${prefix} reiserfsprogs
 fi
+if [ $has_btrfs -eq 1 ]; then
+    installDebianPackage ${prefix} btrfs-tools
+fi
 
 
 #

hooks/fedora-core-6/15-setup-arch

@@ -0,0 +1,44 @@
+#!/bin/sh
+
+prefix=$1
+
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+#  Record arch, if present.
+#
+if [ -d $prefix/etc/rpm ]; then
+
+    logMessage Found /etc/rpm
+
+    #
+    #  If i386 then record this
+    #
+    if [ "$arch" = "i386" ]; then
+        echo "i386-fedora-linux-gnu" >> $prefix/etc/rpm/platform
+    fi
+else
+
+    logMessage Failed to find /etc/rpm
+
+fi
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished
+

hooks/fedora-core-6/20-setup-yum

@@ -26,13 +26,6 @@ fi
 logMessage Script $0 starting
 
 
-#
-#  DNS is probably required to run "yum update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
-    
 #
 # Update yum
 #

hooks/fedora-core-6/30-disable-gettys

@@ -31,7 +31,7 @@ logMessage Script $0 starting
 #
 # Do the transformation.
 #
-sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' ${prefix}/etc/inittab
+sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' -e 's/tty1$/hvc0/' ${prefix}/etc/inittab
 
 
 #

hooks/fedora-core-6/35-setup-users

@@ -21,6 +21,12 @@ my $prefix = shift;
 die "Prefix must be given"       unless defined( $prefix );
 die "Prefix must be a directory" unless ( -d $prefix );
 
+#
+# Setup /etc/shadow and /etc/gshadow (Closes: #499476)
+#
+system( "chroot $prefix /usr/sbin/pwconv" );
+system( "chroot $prefix /usr/sbin/grpconv" );
+
 
 #
 #  Exit unless the 'accounts' variable is set.

hooks/fedora-core-6/40-setup-networking

@@ -73,12 +73,26 @@ E_O_STATIC
          interface=`expr $interface + 1`
      done
 
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 else
     cat <<E_O_DHCP >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
 DEVICE=eth0
 BOOTPROTO=dhcp
 ONBOOT=yes
 E_O_DHCP
+    chroot ${prefix} /usr/bin/yum -y install dhclient
 fi
 
 

hooks/fedora-core-6/50-setup-hostname

@@ -31,7 +31,7 @@ logMessage Script $0 starting
 #
 #  Setup the mailname + hostname files.
 #
-echo ${hostname} > ${prefix}/etc/hostname
+echo ${hostname} | sed 's/^\([^\.]*\)\..*/\1/' > ${prefix}/etc/hostname
 echo ${hostname} > ${prefix}/etc/mailname
 
 
@@ -89,23 +89,25 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        if [ -z "${nohosts}" ]; then
 
-        echo "${ip1}    ${name}    ${hostname}" >> /etc/hosts
+            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
 
-        #
-        #  If we've updated the /etc/hosts file on the host machine
-        # and there is an installation of dnsmasq installed then
-        # reload it.
-        #
-        #  This will let the local LAN clients lookup the new address.
-        #
-        if [ -x /usr/sbin/dnsmasq ] ; then
-            if [ -e /var/run/dnsmasq.pid ]; then
+            #
+            #  If we've updated the /etc/hosts file on the host machine
+            # and there is an installation of dnsmasq installed then
+            # reload it.
+            #
+            #  This will let the local LAN clients lookup the new address.
+            #
+            if [ -x /usr/sbin/dnsmasq ] ; then
+                if [ -e /var/run/dnsmasq.pid ]; then
 
-                logMessage Allowing DNSMasq to restart.
-                kill -HUP `cat /var/run/dnsmasq.pid`
+                    logMessage Allowing DNSMasq to restart.
+                    kill -s HUP `cat /var/run/dnsmasq.pid`
+                fi
             fi
         fi
     fi

hooks/fedora-core-6/60-copy-host-files

@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-#  Copy files from a 'skel' directory, if present, into the
-# new images
-#
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Copy "required" files from our host.
-#
-# NONE DONE
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installCentOS4Package ${prefix} sudo
-
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished

hooks/fedora-core-6/75-fixup-securetty

@@ -30,7 +30,7 @@ logMessage Script $0 starting
 # If the file doesn't exist exit early.
 #
 if [ ! -e ${prefix}/etc/securetty ]; then
-    logMesage /etc/securetty not found.
+    logMessage /etc/securetty not found.
     exit
 fi
 

hooks/fedora-core-6/90-make-fstab

@@ -36,15 +36,19 @@ logMessage Filesystem options are ${options}
 #
 # Find the root device.
 #
-#  1.  default to sda.
+#  1.  default to xvda.
 #
 #  2.  If --ide is specified use hda.
 #
-#  3.  Otherwise use a named $disk_device
+#  3.  If --scsi is specified use sda.
 #
-device=sda
+#  4.  Otherwise use a named $disk_device
+#
+device=xvda
 if [ "${ide}" ]; then
     device=hda
+elif [ "${scsi}" ]; then
+    device=sda
 else
     if [ ! -z "${disk_device}" ]; then
         device=`basename $disk_device`
@@ -59,11 +63,13 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
+devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -75,7 +81,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-    
+
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -83,8 +89,11 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
-    
+
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else
@@ -103,6 +112,9 @@ done
 #if [ $has_reiserfs -eq 1 ]; then
 #    installDebianPackage ${prefix} reiserfsprogs
 #fi
+#if [ $has_btrfs -eq 1 ]; then
+#    installDebianPackage ${prefix} btrfs-tools
+#fi
 
 
 #

hooks/gentoo/30-disable-gettys

@@ -31,7 +31,7 @@ logMessage Script $0 starting
 #
 # Do the transformation.
 #
-sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' ${prefix}/etc/inittab
+sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' -e 's/tty1$/hvc0/' ${prefix}/etc/inittab
 
 
 #

hooks/gentoo/40-setup-networking

@@ -96,6 +96,20 @@ E_O_STATIC
         count=`expr $count + 1`
         interface=`expr $interface + 1`
     done
+
+    #
+    # Hooks are run chrooted, hence the resolv.conf is moved
+    # temporarily to /etc/resolv.conf.old. Use that file, it
+    # will be restored after hooks are run.
+    #
+    if [ '' != "$nameserver" ]; then
+        rm -f ${prefix}/etc/resolv.conf.old
+        for ns in $nameserver; do
+            echo "nameserver $ns" >>${prefix}/etc/resolv.conf.old
+        done
+    else
+        cp /etc/resolv.conf ${prefix}/etc/resolv.conf.old
+    fi
 }
 
 

hooks/gentoo/50-setup-hostname

@@ -31,8 +31,8 @@ logMessage Script $0 starting
 #
 #  We need to split up the hostname into name + domain
 # do this by looking for a dot.
-name=${hostname/.*/}
-domain=${hostname/${name}\./}
+name=$(echo "$hostname" | sed -e 's/\..*$//')
+domain=$(echo "$hostname" | sed -e 's/^[^.]*\.//')
 
 
 #
@@ -96,23 +96,24 @@ if [ -z "${dhcp}" ]; then
         #
         name=`echo ${hostname} | awk -F. '{print $1}'`
 
-        logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+        if [ -z "${nohosts}" ]; then
 
-        echo "${ip1}    ${name}    ${hostname}" >> /etc/hosts
+            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
+            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
 
-        #
-        #  If we've updated the /etc/hosts file on the host machine
-        # and there is an installation of dnsmasq installed then
-        # reload it.
-        #
-        #  This will let the local LAN clients lookup the new address.
-        #
-        if [ -x /usr/sbin/dnsmasq ] ; then
-            if [ -e /var/run/dnsmasq.pid ]; then
+            #
+            #  If we've updated the /etc/hosts file on the host machine
+            # and there is an installation of dnsmasq installed then
+            # reload it.
+            #
+            #  This will let the local LAN clients lookup the new address.
+            #
+            if [ -x /usr/sbin/dnsmasq ] ; then
+                if [ -e /var/run/dnsmasq.pid ]; then
 
-                logMessage Allowing DNSMasq to restart.
-
-                kill -HUP `cat /var/run/dnsmasq.pid`
+                    logMessage Allowing DNSMasq to restart.
+                    kill -s HUP `cat /var/run/dnsmasq.pid`
+                fi
             fi
         fi
     fi

hooks/gentoo/60-copy-host-files

@@ -1,59 +0,0 @@
-#!/bin/sh
-#
-#  Copy files from a 'skel' directory, if present, into the
-# new images
-#
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Copy "required" files from our host.
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/resolv.conf ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installDebianPackage ${prefix} sudo
-
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished

hooks/gentoo/75-fixup-securetty

@@ -30,7 +30,7 @@ logMessage Script $0 starting
 # If the file doesn't exist exit early.
 #
 if [ ! -e ${prefix}/etc/securetty ]; then
-    logMesage /etc/securetty not found.
+    logMessage /etc/securetty not found.
     exit
 fi
 

hooks/gentoo/90-make-fstab

@@ -33,15 +33,19 @@ logMessage Script $0 starting
 #
 # Find the root device.
 #
-#  1.  default to sda.
+#  1.  default to xvda.
 #
 #  2.  If --ide is specified use hda.
 #
-#  3.  Otherwise use a named $disk_device
+#  3.  If --scsi is specified use sda.
 #
-device=sda
+#  4.  Otherwise use a named $disk_device
+#
+device=xvda
 if [ "${ide}" ]; then
     device=hda
+elif [ "${scsi}" ]; then
+    device=sda
 else
     if [ ! -z "${disk_device}" ]; then
         device=`basename $disk_device`
@@ -56,11 +60,13 @@ logMessage "Root device is /dev/$device"
 #
 has_xfs=0
 has_reiserfs=0
+has_btrfs=0
 cat <<E_O_FSTAB > ${prefix}/etc/fstab
 # /etc/fstab: static file system information.
 #
 # <file system> <mount point>   <type>  <options>       <dump>  <pass>
 proc            /proc           proc    defaults        0       0
+devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
 E_O_FSTAB
 for part in `seq 1 ${NUMPARTITIONS}`; do
     eval "PARTITION=\"\${PARTITION${part}}\""
@@ -72,7 +78,7 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         x=$(( $x+1 ))
     done
     IFS="${OLDIFS}"
-    
+
     case "${partdata2}" in
         xfs)
             has_xfs=1
@@ -80,8 +86,11 @@ for part in `seq 1 ${NUMPARTITIONS}`; do
         reiserfs)
             has_reiserfs=1
             ;;
+        btrfs)
+            has_btrfs=1
+            ;;
     esac
-    
+
     if [ "${partdata2}" = "swap" ]; then
         echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
     else
@@ -100,6 +109,9 @@ done
 #if [ $has_reiserfs -eq 1 ]; then
 #    installDebianPackage ${prefix} reiserfsprogs
 #fi
+#if [ $has_btrfs -eq 1 ]; then
+#    installDebianPackage ${prefix} btrfs-tools
+#fi
 
 
 #

hooks/intrepid/01-disable-daemons

@@ -0,0 +1,54 @@
+#!/bin/sh
+#
+#  This script ensures that daemons will not be started inside our
+# chroot() installation.
+#
+# Steve
+# --
+# http://www.steve.org.uk/
+
+
+prefix=$1
+
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+#  Make sure we have a directory.
+#
+if [ ! -d "${prefix}/usr/sbin" ]; then
+
+    mkdir -p "${prefix}/usr/sbin"
+
+    logMessage "created missing directory: ${prefix}/usr/sbin"
+fi
+
+
+#
+#  Add the script.
+#
+echo '#!/bin/sh' >  ${prefix}/usr/sbin/policy-rc.d
+echo 'exit 101'  >> ${prefix}/usr/sbin/policy-rc.d
+chmod 755           ${prefix}/usr/sbin/policy-rc.d
+
+
+
+#
+# Log our finish
+#
+logMessage Script $0 finished.
+

hooks/intrepid/05-shadowconfig-on

@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+#  This script enforces the use of a shadow password file.
+#
+# Steve
+# --
+# http://www.steve.org.uk/
+
+
+prefix=$1
+
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+# Enable the shadow passwords if the command is found.
+#
+if [ -x ${prefix}/sbin/shadowconfig ]; then
+
+   chroot ${prefix} /sbin/shadowconfig on
+else
+
+   logMessage "/sbin/shadowconfig not found.  skipping."
+fi
+
+
+#
+# Log our finish
+#
+logMessage Script $0 finished.
+

hooks/intrepid/15-disable-hwclock

@@ -0,0 +1,38 @@
+#!/bin/sh
+#
+#  This script disables the hardware clock.
+#
+# Steve
+# --
+# http://www.steve.org.uk/
+
+
+prefix=$1
+
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+#  Disable the startup scripts from all runlevels.
+#
+chroot ${prefix} /usr/sbin/update-rc.d -f hwclock.sh remove
+
+#
+# Log our finish
+#
+logMessage Script $0 finished.
+

hooks/intrepid/20-setup-apt

@@ -0,0 +1,87 @@
+#!/bin/sh
+#
+#  This script sets up the /etc/apt/sources.list for APT.
+#
+# Steve
+# --
+#
+
+
+
+
+prefix=$1
+
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+# Attempt to auto-magically detect the use of a Proxy for apt-get, and
+# replicate that setup in our new guest via apt-config dump and save
+# the setting to the proxy guess file.
+#
+logMessage The use of a proxy detected.
+apt-config dump | grep -i Acquire::HTTP::Proxy \
+    > ${prefix}/etc/apt/apt.conf.d/proxy-guess
+
+
+#
+# Setup the sources.list file for new installations of Ubuntu GNU/Linux.
+#
+cat <<E_O_APT > ${prefix}/etc/apt/sources.list
+#
+#  /etc/apt/sources.list
+#
+
+
+#
+# ${dist}
+#
+deb     ${mirror}     ${dist} main restricted universe multiverse
+deb-src ${mirror}     ${dist} main restricted universe
+deb     ${mirror}     ${dist}-updates main restricted universe multiverse
+deb-src ${mirror}     ${dist}-updates main restricted universe
+deb http://security.ubuntu.com/ubuntu ${dist}-security main restricted universe
+deb-src http://security.ubuntu.com/ubuntu ${dist}-security main restricted universe
+
+E_O_APT
+
+
+
+#
+#  Now that the sources have been setup make sure the system is up to date.
+#
+chroot ${prefix} /usr/bin/apt-get update
+
+
+#
+#  Now fixup TLS on non-64bit systems.
+#
+if [ "`uname -m`" = "x86_64" ]; then
+
+    logMessage "Ignoring TLS since we're a 64 bit host."
+
+else
+
+    logMessage "Installing libc6-xen"
+    installDebianPackage ${prefix} libc6-xen
+fi
+
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished

hooks/intrepid/25-generate-locale

@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+#  This script generates a default en_US.UTF-8 locale.
+#
+# Ward
+# --
+
+
+
+prefix=$1
+
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+
+#
+# Install the English language pack.
+#
+#  NOTE:  Failure to support your favourite language is *not* a bug.
+#
+installDebianPackage ${prefix} language-pack-en
+
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished

hooks/intrepid/30-disable-gettys

@@ -0,0 +1,62 @@
+#!/bin/sh
+#
+#  This script comments out all virtual terminals which aren't on the
+# first console - that must remain so that 'xm console ...' works
+# correctly.
+#
+
+
+prefix=$1
+
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+
+#
+# Log our start
+#
+logMessage Script $0 starting
+
+#
+#  Remove the links for upstart
+#
+rm -f ${prefix}/etc/event.d/tty[!1]
+[ -f ${prefix}/etc/event.d/tty1 ] && {
+    sed -i -e s/tty1/hvc0/ ${prefix}/etc/event.d/tty1
+    mv ${prefix}/etc/event.d/tty1 ${prefix}/etc/event.d/hvc0
+}
+[ -f ${prefix}/etc/inittab ] && sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' -e 's/tty1$/hvc0/' ${prefix}/etc/inittab
+
+#
+#  Are we using an alternative serial device?
+#
+if [ ! -z "${serial_device}" ]; then
+
+    serial_device=`basename ${serial_device}`
+
+    # Let the user know.
+    logMessage "Replacing default serial device (hvc0) with ${serial_device}"
+
+    # replace existing device.
+    mv ${prefix}/etc/event.d/hvc0  ${prefix}/etc/event.d/${serial_device}
+    sed -i -e s/hvc0/${serial_device}/ ${prefix}/etc/event.d/${serial_device}
+    [ -f ${prefix}/etc/inittab ] && sed -i -e s/hvc0/${serial_device}/ ${prefix}/etc/inittab
+
+
+
+    # make sure that it is allowed to login.
+    echo $serial_device >> ${prefix}/etc/securetty
+fi
+
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished

hooks/intrepid/35-setup-users

@@ -0,0 +1,181 @@
+#!/usr/bin/perl -w
+#
+#  This script attempts to copy all user accounts from the host to
+# the guest.  It does this by copying all user accounts which are not
+# already present.
+#
+#  NOTE:  Unless '--accounts' was specified upon the 'xen-create-image'
+# command line we don't do this.
+#
+# Steve
+# --
+# http://www.steve.org.uk/
+
+
+use strict;
+use Env;
+
+
+my $prefix = shift;
+
+die "Prefix must be given"       unless defined( $prefix );
+die "Prefix must be a directory" unless ( -d $prefix );
+
+
+#
+#  Exit unless the 'accounts' variable is set.
+#
+exit unless ( $ENV{'accounts'} );
+
+#
+#  Make sure we have $prefix/etc
+#
+die "Prefix is missing /etc : $prefix" unless ( -d $prefix . "/etc" );
+
+
+#
+#  Read all accounts from the installed /etc/passwd on the guest.
+#
+my %present;
+if ( -e $prefix . "/etc/passwd" )
+{
+    %present = readAccounts( $prefix . "/etc/passwd" );
+}
+
+
+#
+#  Now read the accounts on the host.
+#
+my %host = readAccounts( "/etc/passwd" );
+
+
+#
+#  For each account not present on new installation then add it
+#
+foreach my $account ( sort keys( %host ) )
+{
+    if ( ! $present{ $account } )
+    {
+        print "Adding: $account\n";
+        addAccount( $account );
+
+        #
+        #  Find any groups the user is member of on the host
+        # and add them on the guest system
+        #
+        addGroups( $account );
+    }
+}
+
+
+
+#
+#  Read the accounts which are already present on the guest image.
+#
+sub readAccounts
+{
+    my ( $file ) = ( @_ );
+
+
+    my %found;
+
+    open( EXISTING, "<", $file );
+    foreach my $line ( <EXISTING> )
+    {
+        #
+        #  Record the userid + username
+        #
+        if ( $line =~ /^([^:]+):([^:]+):([^:]+)/ )
+        {
+            my $user = $1;
+            my $pass = $2;
+            my $uid  = $3;
+
+            $found{$user} = 1;
+        }
+    }
+    close( EXISTING );
+
+    return( %found );
+}
+
+
+
+
+#
+#  Add the passwd + shadow accounts for the given user.
+#
+sub addAccount
+{
+    my ( $user ) = ( @_ );
+
+    #
+    #  passwd file.
+    #
+    open( PASSWD, "<", "/etc/passwd" );
+    foreach my $line ( <PASSWD> )
+    {
+        chomp( $line );
+        if ( $line =~ /^\Q$user\E:/ )
+        {
+            #
+            #  Add the line
+            #
+            open( OUTY, ">>", $prefix . "/etc/passwd" );
+            print OUTY $line . "\n";
+            close( OUTY );
+        }
+    }
+    close( PASSWD );
+
+
+    #
+    #  shadow file.
+    #
+    open( SHADOW, "<", "/etc/shadow" ) or die "Failed to open : $!";
+    foreach my $line ( <SHADOW> )
+    {
+        chomp( $line );
+        if ( $line =~ /^\Q$user\E:/ )
+        {
+            #
+            #  Add the line
+            #
+            open( OUTY, ">>", $prefix . "/etc/shadow" );
+            print OUTY $line . "\n";
+            close( OUTY );
+        }
+    }
+    close( SHADOW );
+}
+
+
+
+#
+#  Find the groups a user is member of on the host, and add them to
+# those groups on the new guest.
+#
+sub addGroups
+{
+    my( $username ) = ( @_ );
+
+    #
+    #  Get the groups.
+    #
+    my $groups = `groups $username`;
+    # split off the usernmame.
+    if ( $groups =~ /^([^:]+):(.*)/ )
+    {
+        $groups = $2;
+        print "User: $username is member of the groups: $groups\n";
+    }
+
+    foreach my $g ( split( / /, $groups ) )
+    {
+        # Make sure the group exists.
+        system( "chroot $prefix /usr/sbin/addgroup $g" );
+
+        # add the user to it.
+        system( "chroot $prefix /usr/sbin/adduser $username $g" );
+    }
+}