Release 4.3

Remove generated file t/modules.t in clean target
Otherwise the package wouldn't build twice in a row. It didn't hurt while developing since it's listed in .gitignore. :-)
2026-02-20 05:45:15 +00:00 · 2012-06-27 00:03:56 +02:00 · 2012-06-27 00:03:56 +02:00 · 2012-06-27 00:03:56 +02:00 · 2012-06-26 22:32:52 +02:00 · 2012-06-08 21:45:49 +02:00
268 changed files with 6511 additions and 9787 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -0,0 +1,30 @@
+# Note! Please run 'prove t/gitignore.t' after changing
+# this file, to check its coherency
+
+# all dotfiles
+.*
+# but we _wan't_ those dot-files
+!.gitignore
+!.mailmap
+
+# ChangeLog is generated during make
+/ChangeLog
+
+# those are generated during debian package build
+/build-stamp
+/configure-stamp
+/man
+/debian/files
+/debian/xen-tools
+/debian/xen-tools.debhelper.log
+/debian/xen-tools.substvars
+
+# git-generated patches
+/*.patch
+
+# some backups
+*~
+*.orig
+
+# backups created by "make update-version"
+*.bak
--- a/.hgignore
+++ b/.hgignore
@@ -1,4 +0,0 @@
-(^|/)CVS($|/)
-(^|/)\.hg($|/)
-(^|/)\.hgtags($|/)
-ChangeLog
--- a/.hgtags
+++ b/.hgtags
@@ -1 +0,0 @@
-d75c787add2a7ceb19b30b018d4d16b7317c772d release-4.
--- a/.mailmap
+++ b/.mailmap
@@ -0,0 +1,6 @@
+Axel Beckert <abe@deuxchevaux.org>
+Dmitry Nedospasov <dmitry@nedos.net>
+Nathan O'Sullivan <nathan@mammoth.com.au>
+Radu Spineanu <radu@debian.org> radu <none@none>
+Steve Kemp <steve@steve.org.uk> steve <none@none>
+Stéphane Jourdois <sjourdois@gmail.com> <stephane@jourdois.fr>
--- a/.release
+++ b/.release
@@ -1,34 +0,0 @@
-#
-#  Configuration file for 'release', a utility to make release more
-# easily:
-#
-#   http://release.repository.steve.org.uk/
-#
-# Steve
-# -- 
-#
-
-
-#
-#  Command to run
-#
-preupload="make release"
-
-
-#
-#
-#  Pattern for our release tarball.
-#
-pattern=xen-tools-[0-9].[0-9].tar.gz*
-
-
-#
-#  Pattern for our GPG-signature.
-#
-signature=xen-tools-[0-9].[0-9].tar.gz.asc
-
-
-#
-#  Upload location.
-#
-upload=steve@www.xen-tools.org:/home/www/www.xen-tools.org/htdocs/software/xen-tools/
--- a/57
+++ b/57
@@ -1,8 +1,9 @@
+Primary Authors
+---------------

-        
-Primary Author
--------------
-
+  Axel Beckert <abe@deuxchevaux.org>
+  Dmitry Nedospasov <dmitry@nedos.net>
+  Stéphane Jourdois <sjourdois [at] com.gmail>
  Steve Kemp <steve [at] uk.org.steve>


@@ -11,7 +12,7 @@ Contributions

  Listed alphabetically by surname.

-  C.J. Adams-Collier <cjcollier [at] com.gmail.com
+  C.J. Adams-Collier <cjcollier [at] com.gmail>
   - Added new modular structure to the code.

  Nick Anderson  <nick [at] net.anders0n>
@@ -23,6 +24,16 @@ Contributions
  Justin Azoff <JAzoff [at] edu.albany.uamail>
   - Added LVM support to xen-create-image.

+  Pieter Barrezeele <macbar [at] be.fab4>
+   - Several small but useful enhancements
+   - Bugfixes
+
+  Brian Bennett <bahamat [at] net.digitalelf>
+   - Made multiple times given --ip options work
+
+  Vagrant Cascadian <vagrant [at] org.debian>
+   - Less redundant SSH key generation
+
  Edd Dumbill <edd [at] com.usefulinc>
   - Contributed APT sources.list file for Ubuntu's Dapper release.

@@ -32,12 +43,18 @@ Contributions
  Stefan Fritsch  <sf [at] de.sfritsch>
   - Contributed the policy-rc.d fixups for common.sh

+  Raphaël Halimi <raphael.halimi [at] com.gmail>
+    - Contribute bashism fix
+
  Sven Hertge <sven [at] de.svenhartge>
   - Bugfix for Debian/Gentoo package installation.

  Joey Hess <joeyh [at] org.debian>
   - Provided sample code for module copying and several useful bug reports

+  John Hughes <john [at] com.fallenbit>
+   - Physical devices reordering for pygrub
+
  Kirk Ismay <captain [at] com.netidea>
   - Added hook for automatic CFEngine installation.

@@ -48,21 +65,41 @@ Contributions
   - Improved binary detection and good suggestions.
   - Better portability for non-bash shells.

+  Jorge Armando Medina <jmedina [at] com.e-compugraf>
+   - Fix for backward compatibility with xvc0 serial consoles
+
  Gordon Messmer <gmessmer [at] edu.washington.u>
   - Supplied .spec file for building .rpm packages.

+  Wilson Neil <neil [at] uk.co.aldur>
+   - Several suggestions and code for disabling start-stop-daemon
+   - Compatibility fixups for Ubuntu.
+
+  Nathan O'Sullivan <nathan [at] au.com.mammoth>
+   - New features wrt. options and helper functions
+
+  Guillaume Pernot <gpernot [at] org.praksys>
+    - Fixed Sarge amd64 special case
+
  Walter Reiner <walter [at] at.wreiner>
   - Provided --image-dev + --swap-dev patch.

  Jameson Rollins <jrollins [at] edu.columbia.phys>
   - Provided --output + --extension code.

+  Michal Safranek (Wejn) <wejn [at] box.cz>
+   - Inspiration for pygrub in the install-kernel scripts
+
  Felipe Scarel <fbscarel [at] com.gmail>
   - Bugfix for --no-swap + LVM

+  Johan Schurer <johannes.schurer [at] com.alcatel-lucent>
+   - CentOS 6 support
+   - CentOS 5 fixes
+
  Radu Spineanu <radu [at] org.debian>
   - Supplied many small tweaks, bugfixes, and suggestions.
-   - Radu is also the Debian package maintainer and has CVS commit access.
+   - Radu is also one of the former Debian package maintainers.

  Henning Sprang <henning_sprang [at] de.gmx>
   - Many suggestions and useful Debian bug reports.
@@ -73,9 +110,11 @@ Contributions
  Gergely Tamas <dice [at] hu.kfki.mfa>
   - Added patch to make initrd setup optional.

+  Alex Tomlins <alex.tomlins [at] com.unboxedconsulting>
+   - apt_proxy support
+
  Ward Vandewege <ward [at] be.pong>
   - Made several updates for Ubuntu support.

-  Wilson Neil <neil [at] uk.co.aldur>
-   - Several suggestions and code for disabling start-stop-daemon
-   - Compatibility fixups for Ubuntu.
+  xstasi on Launchpad
+   - Proper upstart handling in the chroot
--- a/46
+++ b/46
@@ -0,0 +1,46 @@
+KNOWN BUGS in xen-tools
+
+Bugs to fix before a 4.3 release
+--------------------------------
+
+* xen-delete-image doesn't remove all logical volumes if --partitions is used.
+
+   See the link below for details how to reproduce. Reproducable at
+   least with --lvm. Thanks to Antoine Benkemoun for reporting.
+
+   http://xen-tools.org/pipermail/xen-tools-discuss/2010-May/000757.html
+
+* xen-delete-image ignores extension setting
+
+* partitions were mounted in config file order, not in mountpoint order.
+  That implies that if you specified :
+	/boot
+	/
+  in that order, / was mounted _over_ /boot, and you would not _see_ /boot.
+  Xen-Tools would then install boot on your / partition, and your boot device
+  was just empty and unbootable.
+
+  Workaround for 4.2 is to write your partition file such as mounts overlap
+  correctly when mounted in specified order.
+
+  Current (unreleased) fix is to sort by mountpoint length.
+
+  Fix would be to reproduce what mount does with mount -a.
+
+* xen-create-image doesn't unmount the tempdir properly if /proc wasn't mounted inside
+
+* xen-create-image says on startup summary that the Debian mirror is
+  used even if Ubuntu is going to be installed (and works)
+
+* xen-list-images does not honour --extension
+
+* --extension='' (i.e. empty string) no more works
+
+
+Bugs to fix later
+-----------------
+
+t/xen-tools.t can't really test Xen::Tools as the latter requires a
+local Xen installation. For proper testing, a dummy set of Xen
+configuration files and configurable paths to them in Xen::Tools would
+be necessary.
--- a/7
+++ b/7
@@ -2,7 +2,12 @@
 xen-tools
 ---------

-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009: Steve Kemp.  All rights reserved.
+Copyright (c) 2010-2012: The Xen-Tools Development Team, currently consisting of:
+                         Axel Beckert <abe@deuxchevaux.org>,
+                         Dmitry Nedospasov <dmitry@nedos.net>, and
+                         Stéphane Jourdois <sjourdois@gmail.com>
+

 This project is free software.  You may redistribute it under the
 terms of *either* the Perl Artistic License, or the GNU General
--- a/104
+++ b/104
@@ -14,9 +14,10 @@
 #
 TMP        ?= /tmp
 DIST_PREFIX = ${TMP}
-VERSION     = 4.1
+VERSION     = 4.3
+DEBVERSION  = $(shell echo $(VERSION)|sed 's/\(rc\|pre\|beta\|alpha\)/~\1/')
 BASE        = xen-tools
-
+VCS         = git

 #
 #  Installation prefix, useful for the Debian package.
@@ -43,20 +44,24 @@ nop:
 # with those details.
 #
 changelog:
-	hg log -v > ChangeLog
+	$(VCS) log -v > ChangeLog


 #
 #  Delete all temporary files, recursively.
 #
 clean:
-	@find . -name '.*~' -exec rm \{\} \;
-	@find . -name '.#*' -exec rm \{\} \;
-	@find . -name '*~' -exec rm \{\} \;
-	@find . -name '*.bak' -exec rm \{\} \;
-	@find . -name '*.tmp' -exec rm \{\} \;
-	@find . -name 'tags' -exec rm \{\} \;
-	@find . -name '*.8.gz' -exec rm \{\} \;
+	@find . \
+		-path ./.git -prune -o \
+		\( \
+			-name '*~' -o \
+			-name '.#*' -o \
+			-name '*.bak' -o \
+			-name '*.tmp' -o \
+			-name 'tags' -o \
+			-name '*.8.gz' -o \
+			-name '*.tdy' \
+		\) -exec rm "{}" +
 	@if [ -d man ]; then rm -rf man ; fi
 	@if [ -e build-stamp ]; then rm -f build-stamp ; fi
 	@if [ -e configure-stamp ]; then rm -f configure-stamp ; fi
@@ -69,14 +74,14 @@ clean:
 #  If the testsuite runs correctly then commit any pending changes.
 #
 commit: test
-	hg commit
+	$(VCS) commit


 #
 #  Show what has been changed in the local copy vs. the remote repository.
 #
 diff:
-	hg diff 2>/dev/null
+	$(VCS) diff 2>/dev/null


 #
@@ -88,7 +93,7 @@ fixup-perms:
 	chmod 644 etc/xen-tools.conf
 	chmod 644 etc/xm.tmpl
 	chmod 644 etc/xm-nfs.tmpl
-	chmod 644 misc/xm misc/xen-tools misc/README
+	chmod 644 misc/xen-tools misc/README

 #
 #  Install files to /etc/
@@ -105,7 +110,6 @@ install-etc:
 	cp partitions/*-*     ${prefix}/etc/xen-tools/partitions.d/
 	-mkdir -p             ${prefix}/etc/bash_completion.d
 	cp misc/xen-tools     ${prefix}/etc/bash_completion.d/
-	cp misc/xm            ${prefix}/etc/bash_completion.d/


 #
@@ -121,6 +125,7 @@ install-bin:
 	cp bin/xen-delete-image     ${prefix}/usr/bin
 	cp bin/xen-list-images      ${prefix}/usr/bin
 	cp bin/xen-update-image     ${prefix}/usr/bin
+	cp bin/xt-guess-suite-and-mirror ${prefix}/usr/bin
 	chmod 755 ${prefix}/usr/bin/xen-create-image
 	chmod 755 ${prefix}/usr/bin/xen-create-nfs
 	chmod 755 ${prefix}/usr/bin/xt-customize-image
@@ -129,6 +134,7 @@ install-bin:
 	chmod 755 ${prefix}/usr/bin/xen-delete-image
 	chmod 755 ${prefix}/usr/bin/xen-list-images
 	chmod 755 ${prefix}/usr/bin/xen-update-image
+	chmod 755 ${prefix}/usr/bin/xt-guess-suite-and-mirror



@@ -137,37 +143,60 @@ install-bin:
 #
 install-hooks:
 	for i in roles/* ; do if [ -f $$i ]; then cp $$i ${prefix}/etc/xen-tools/role.d; fi ; done
+	for i in ${prefix}/usr/lib/xen-tools/*.d; do if [ -L "$$i" ]; then rm -vf "$$i"; fi; done
 	mkdir -p ${prefix}/usr/lib/xen-tools/centos-4.d/
 	mkdir -p ${prefix}/usr/lib/xen-tools/centos-5.d/
+	mkdir -p ${prefix}/usr/lib/xen-tools/centos-6.d/
 	mkdir -p ${prefix}/usr/lib/xen-tools/fedora-core-6.d/
 	cp -R hooks/centos-4/*-* ${prefix}/usr/lib/xen-tools/centos-4.d
 	cp -R hooks/centos-5/*-* ${prefix}/usr/lib/xen-tools/centos-5.d
+	cp -R hooks/centos-6/*-* ${prefix}/usr/lib/xen-tools/centos-6.d
 	cp -R hooks/fedora-core-6/*-* ${prefix}/usr/lib/xen-tools/fedora-core-6.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-4.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-5.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-7.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-8.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-9.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-10.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-11.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-12.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-13.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-14.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-15.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-16.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s fedora-core-6.d fedora-core-17.d
 	mkdir -p ${prefix}/usr/lib/xen-tools/debian.d/
 	cp -R hooks/debian/*-* ${prefix}/usr/lib/xen-tools/debian.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d sarge.d
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d lenny.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d etch.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d lenny.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d squeeze.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d wheezy.d
 	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d sid.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d testing.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s debian.d stable.d
 	mkdir -p ${prefix}/usr/lib/xen-tools/gentoo.d/
 	cp -R hooks/gentoo/*-* ${prefix}/usr/lib/xen-tools/gentoo.d
-	 mkdir -p ${prefix}/usr/lib/xen-tools/edgy.d/
-	cp -R hooks/edgy/*-* ${prefix}/usr/lib/xen-tools/edgy.d/
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d feisty.d
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d gutsy.d
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d hardy.d
-	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d intrepid.d
 	mkdir -p ${prefix}/usr/lib/xen-tools/dapper.d/
 	cp -R hooks/dapper/*-* ${prefix}/usr/lib/xen-tools/dapper.d/
 	mkdir -p ${prefix}/usr/lib/xen-tools/edgy.d/
 	cp -R hooks/edgy/*-* ${prefix}/usr/lib/xen-tools/edgy.d/
-	mkdir -p ${prefix}/usr/lib/xen-tools/dapper.d/
-	cp -R hooks/dapper/*-* ${prefix}/usr/lib/xen-tools/dapper.d/
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d feisty.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d gutsy.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s edgy.d hardy.d
+	mkdir -p ${prefix}/usr/lib/xen-tools/intrepid.d/
+	cp -R hooks/intrepid/*-* ${prefix}/usr/lib/xen-tools/intrepid.d/
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s intrepid.d jaunty.d
+	mkdir -p ${prefix}/usr/lib/xen-tools/karmic.d/
+	cp -R hooks/karmic/*-* ${prefix}/usr/lib/xen-tools/karmic.d/
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d lucid.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d maverick.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d natty.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d oneiric.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d precise.d
+	-cd ${prefix}/usr/lib/xen-tools/ && ln -s karmic.d quantal.d
 	cp hooks/common.sh ${prefix}/usr/lib/xen-tools
+	cp -r hooks/common ${prefix}/usr/lib/xen-tools


 #
@@ -196,8 +225,8 @@ install: fixup-perms install-bin install-etc install-hooks install-libraries ins
 #  Build our manpages via the `pod2man` command.
 #
 manpages:
-	mkdir man
-	cd bin; for i in *-*; do pod2man --release=${VERSION} --official --section=8 $$i ../man/$$i.8; done
+	-mkdir -p man
+	cd bin; for i in *-*[!y]; do pod2man --release=${VERSION} --official --section=8 $$i ../man/$$i.8; done
 	for i in man/*.8; do gzip --force -9 $$i; done


@@ -209,18 +238,25 @@ release: tidy fixup-perms update-version update-modules clean changelog
 	rm -f $(DIST_PREFIX)/$(BASE)-$(VERSION).tar.gz
 	cp -R . $(DIST_PREFIX)/$(BASE)-$(VERSION)
 	rm -rf $(DIST_PREFIX)/$(BASE)-$(VERSION)/debian
-	rm -rf $(DIST_PREFIX)/$(BASE)-$(VERSION)/.hg*
+	rm -rf $(DIST_PREFIX)/$(BASE)-$(VERSION)/.git*
 	cd $(DIST_PREFIX) && tar -cvf $(DIST_PREFIX)/$(BASE)-$(VERSION).tar $(BASE)-$(VERSION)/
 	gzip $(DIST_PREFIX)/$(BASE)-$(VERSION).tar
-	mv $(DIST_PREFIX)/$(BASE)-$(VERSION).tar.gz .
+	mv $(DIST_PREFIX)/$(BASE)-$(VERSION).tar.gz ..
 	rm -rf $(DIST_PREFIX)/$(BASE)-$(VERSION)
-	gpg --armour --detach-sign $(BASE)-$(VERSION).tar.gz
+	gpg --armour --detach-sign ../$(BASE)-$(VERSION).tar.gz
+
+#
+#  Make a new orig.tar.gz for the Debian package
+#
+orig-tar-gz: release
+	cp -p ../$(BASE)-$(VERSION).tar.gz ../$(BASE)_$(DEBVERSION).orig.tar.gz
+	cp -p ../$(BASE)-$(VERSION).tar.gz.asc ../$(BASE)_$(DEBVERSION).orig.tar.gz.asc


 #
 #  Run the test suite.
 #
-test:
+test: update-modules
 	prove --shuffle t/


@@ -237,7 +273,7 @@ test-verbose:
 #
 tidy:
 	if [ -x /usr/bin/perltidy ]; then \
-	for i in bin/*-*; do \
+	for i in bin/*-*[^~]; do \
 		echo "tidying $$i"; \
 		perltidy  $$i \
 	; done \
@@ -255,12 +291,12 @@ uninstall:
 	rm -f ${prefix}/usr/bin/xt-install-image
 	rm -f ${prefix}/usr/bin/xt-create-xen-config
 	rm -f ${prefix}/usr/bin/xen-create-nfs
+	rm -f ${prefix}/usr/bin/xt-guess-suite-and-mirror
 	rm -f ${prefix}/etc/xen-tools/xen-tools.conf
 	rm -f ${prefix}/etc/xen-tools/xm.tmpl
 	-rm -rf ${prefix}/etc/xen-tools/skel
 	-rmdir ${prefix}/etc/xen-tools/
 	-rm -f ${prefix}/etc/bash_completion.d/xen-tools
-	-rm -f ${prefix}/etc/bash_completion.d/xm
 	rm -rf ${prefix}/usr/lib/xen-tools
 	rm -f ${prefix}/usr/share/man/man8/xen-create-image.8.gz
 	rm -f ${prefix}/usr/share/man/man8/xen-delete-image.8.gz
@@ -274,7 +310,7 @@ uninstall:
 #  NOTE: Removes empty local directories.
 #
 update:
-	hg pull --update 2>/dev/null
+	$(VCS) pull --update 2>/dev/null


 #
@@ -282,7 +318,7 @@ update:
 # cases to ensure that all required modules are available.
 #
 update-modules:
-	cd t && make modules
+	@cd t && make modules


 #
@@ -290,4 +326,4 @@ update-modules:
 # at the top of this file.  Steve-Specific?
 #
 update-version:
-	perl -pi.bak -e "s/RELEASE = '[0-9]\.[0-9]';/RELEASE = '${VERSION}';/g" bin/*-*
+	perl -pi.bak -e "s/RELEASE = '[0-9]\.[0-9][^']*';/RELEASE = '${VERSION}';/g" bin/*-*[!~]
--- a/69
+++ b/69
@@ -0,0 +1,69 @@
+xen-tools 4.3rc2 (released TODO)
+=======================================
+
+Bug Fixes
+---------
+
+* Fix several testuite failures depending on the build host's
+  installation.
+
+Other Changes
+-------------
+
+* Remove most Mercurial traces
+
+
+xen-tools 4.3rc1 (released 08 Jun 2012)
+=======================================
+
+New Features and Major Changes
+------------------------------
+
+* Massive code deduplication in hooks directory
+
+New Options
+-----------
+
+    --dontformat (xen-create-image)
+    --finalrole  (xen-create-image)
+    --apt_proxy  (xen-create-image)
+
+Newly Supported Distribution Releases
+-------------------------------------
+
+* Ubuntu 11.10 Oneiric
+* Ubuntu 12.04 Precise
+* Ubuntu 12.10 Quantal
+* CentOS 6
+
+
+xen-tools 4.2.1 (released 17 Mar 2011)
+======================================
+
+Bugfix Release only
+
+
+xen-tools 4.2 (released 05 Oct 2010)
+====================================
+
+First final release of the new Xen-Tools Team.
+
+Supports Ubuntu up to 11.04 (Natty) and Debian up to 7.0 (Wheezy).
+
+
+New Options
+-----------
+
+    --debootstrap-cmd (xen-create-image and xt-install-image)
+
+New Features and Major Changes
+------------------------------
+
+* Uses hvc0 and xvda devices by default
+* Also supports cdebootstrap
+* Preliminary btrfs support.
+* Uses GeoIP for Debian mirrors: Default Debian mirror is now
+  cdn.debian.net, see http://wiki.debian.org/DebianGeoMirror for
+  details.
+* New helper program xt-guess-suite-and-mirror, used to find the
+  default mirror and suite.
--- a/116
+++ b/116
@@ -1,30 +1,66 @@
+xen-tools
+---------

 Homepage:
    http://www.xen-tools.org/software/xen-tools

-Mercurial Repository:
-    http://xen-tools.repository.steve.org.uk/
+Git Repository:
+    http://gitorious.org/xen-tools

 Mailing Lists:
-    http://xen-tools.org/software/xen-tools/lists.html
+    http://www.xen-tools.org/software/xen-tools/lists.html

-
-
-xen-tools
---------
-
-  The xen-tools package contains a collection of Perl scripts for
- working with Xen guest images under Debian GNU/Linux.
+About:
+  Xen-tools contains a collection of Perl scripts for working with Xen
+ guest images under Linux.

  Using this software, you can easily create new Xen guests configured
- to be accessible over your local network and complete with an installed
- copy of OpenSSH.
+ to be accessible over the network via OpenSSH.

-  This software is primarily aimed at users who wish to create virtual 
- instances of Debian Sarge, Etch, or Sid.  Although other distributions
- such as Ubuntu Dapper, Edgy, and Feisty are supported if you have the
- appropriate packages installed.
+  xen-tools currently has scripts to install most releases of Debian
+ (starting with 3.1 "Sarge") and Ubuntu (starting with 6.06 LTS
+ "Dapper") and some RPM-based distributions. On the Dom0 side all
+ current Xen supporting distributions should work.

+  However, currently only Debian and Ubuntu releases are tested and
+ known to work, i.e.:
+
+	Debian:
+	  * Sarge 3.1 (i386 and DomU only)
+	  * Etch 4.0 (Dom0 no more tested)
+	  * Lenny 5.0
+	  * Squeeze 6.0
+	  * Wheezy 7.0
+	  * Sid (works at least at the moment of writing :-)
+
+	Ubuntu (only DomUs tested):
+	  * Dapper Drake 6.06
+	  * Edgy Eft 6.10
+	  * Feisty Fawn 7.04
+	  * Gutsy Gibbon 7.10
+	  * Hardy Heron 8.04 (see [1])
+	  * Interpid Ibex 8.10
+	  * Jaunty Jackaplope 9.04
+	  * Karmic Koala 9.10
+	  * Lucid Lynx 10.04
+	  * Maverick Meerkat 10.10
+	  * Natty Narwhal 11.04
+	  * Oneiric Ocelot 11.10
+	  * Precise Pangolin 12.04
+	  * Quantal Quetzal 12.10 (preliminary support as it's not yet available)
+
+	CentOS (only DomUs tested, pygrub support incomplete):
+	  * CentOS 5
+	  * CentOS 6
+
+  [1] There is an issue with debootstrap on hardy not installing ksyslogd
+      This can be fixed by chrooting into the newly installed system
+      and removing the startup scripts. See:
+      http://www.linux-vserver.org/Installing_Ubuntu_8.04_Hardy_as_guest
+
+  Xen-Tools are available prepackaged in Debian and as source tar-ball
+ for local installation. Installing from source should work flawlessly
+ on most Linux systems that meet the installation requirements.

 Requirements
 ------------
@@ -37,34 +73,34 @@ Requirements
        * The Perl module "Config::IniFiles"
          - Both of these modules are available as Debian packages,
            or direct from http://www.cpan.org/ for non-Debian distributions.
+        * Make, if you are not installing through a package manager

-
-  In order to install RPM-based distributions such as CentOS, or
- Fedora Core you will need a correctly installed and configured
- "rinse" package.
-
-  To install Ubuntu distributions upon a Debian host system you will
- need either:
-
-        * The Ubuntu version of debootstrap installed.
-        * A patched debootstrap package from:
-                http://steve.org.uk/Software/tmp/debootstrap/
+  You can try to install RPM-based distributions such as CentOS, or
+ Fedora Core, but you will need a correctly installed and configured
+ "rinse" package. This is currently not supported.

  If you wish to create new Xen instances which may be controlled by
- users via a login shell you should also install the xen-shell package
- which is available from:
+ users via a login shell you can have a look at the (currently
+ unmaintained) xen-shell package which is available from:

          http://xen-tools.org/software/xen-shell/


+Installation
+------------
+
+As root or with sudo, execute "make install".
+
+See debian/README.source how to build the Debian package from a
+checked out copy of the git repository (i.e. without a source tar
+ball).
+

 The Scripts
 -----------

-  There now follows a brief description of each included script,
- for more thorough documentation please consult the appropriate
- manpage.
-
+  Here is a brief description of each included script, for more
+ thorough documentation please consult the appropriate man page.


 xen-create-image
@@ -73,10 +109,6 @@ xen-create-image
  This script is designed to create new images which may be used
 with the Xen hypervisor.

-  The virtual images will have their networking settings created and,
- you may optionally cause the new instance to boot once it has
- been created.
-
  This script performs the initial setup, then delegates the real
 work to a collection of helper scripts:

@@ -91,6 +123,11 @@ xen-create-image
      Create a configuration file in /etc/xen such that Xen can
      boot the newly created machine.

+    * xt-guess-suite-and-mirror
+      In case of a Debian or Ubuntu Dom0, this script tries to guess
+      the most suitable suite and mirror for DomUs based on the Dom0's
+      /etc/apt/sources.list.
+

 xen-create-nfs
 --------------
@@ -132,6 +169,5 @@ xen-update-image
    a Debian-derived distribution.


-Steve
--
-
+-- 
+The Xen-Tools Developer Team
--- a/213
+++ b/213
@@ -1,16 +1,209 @@
 TODO
----
+====

-  1. Test and support more file system types.  Actually this should be
-    pretty simple now that the parameters are stored in the configuration
-    hash.  The only issue is that trailing whitespace is missing from the
-    "make_fs_foo" option.
+See KNOWN_BUGS for real bugs.

-  2. Write more test cases.
+Bugs to fix and features to add for 4.3
+---------------------------------------

-  3. LVM snapshot support as an install source.
+Refactor TLS disabling. Seems to be happen twice, once in 20-setup-apt
+and once in 10-disable-tls.

-  4. xen-delete-image should unallocate any used IP addresses.
+Bugs to fix and features to add for 5.0
+---------------------------------------

-Steve
--
+* xen-create-image man page overhaul:
+
+- ambiguous option list with regards to parameters
+- Set Fail in more situations where the script has clearly failed
+  i.e.: lvm exists
+
+* Test and support more file system types.
+
+   Actually this should be pretty simple now that the parameters are
+   stored in the configuration hash.
+
+* Setup locales in the hooks?
+
+   Currently no locales are set and this causes several domU errors
+   which appear in the domU's logs.
+
+* Documentation overhaul
+
+   Better explain what roles /should be/ used for, and that roles
+   are examples, and shouldn't cover every single scenario. They
+   are also easy to write.
+
+* Think again about disk_device checks :
+
+   Newer Xen provides "xvda", older provided "sda". The current check for
+   valid values of disk_device (used for root device in domU /etc/fstab)
+   does only allow those values.
+   This forbids any deployment of LVM/RAID _inside_ domU, which cannot
+   be created by xen-tools anyway. So the current check is fine with the
+   current possibilities of xen-tools, but could become a limitation.
+   - Is it possible/wanted to "query" xend for default device names ?
+   - Is it possible to create /dev/mapper devices with xend conf ?
+   - Can we just avoid to ask for this value and not specify the device
+   in /etc/fstab (and use /dev/root, /dev/by-uuid, or anything ?)
+
+* xen-create-image --dist=... / sources.list generation should be more fine-grained
+
+   xen-tools should offer the possibility to enable/disable
+   security/volatile/backports as well as
+   contrib/non-free/universe/restricted/multiverse for each of them
+   not only based on defaults plus the Dom0's sources.list
+
+   One idea is to allow parameters like
+
+   --dist="lenny:main,contrib,non-free;security;volatile:main"
+
+   and maybe (if the default will be to include security) to also
+   allow
+
+   --dist="lenny;no-security"
+
+   The second idea (by Mathieu Parent) is to have an
+   /etc/xen-tools/sources.list.d/ which then contains files like
+   lenny.list, lenny-server.list, karmic.list, etc. which defaults to
+   $dist.list, but can be also select with --sources-list=lenny-server
+   (which looks for ./lenny-server.list, ./lenny-server,
+   /etc/xen-tools/sources.list.d/lenny-server.list and
+   /etc/xen-tools/sources.list.d/lenny-server in that order).
+
+   Third variant is to use /etc/xen-tools/sources.lists/ instead of
+   /etc/xen-tools/sources.list.d/ because that directory is no
+   runparts-like directory.
+
+* LVM snapshot support as an install source.
+
+* Clean up mounts on Ctrl-C, causes error while installing otherwise:
+
+   Removing /dev/vg0/acromantula-domu1-disk - since we're forcing the
+   install Can't remove open logical volume "acromantula-domu1-disk"
+   this should be a matter of unmounting the mounted volume from /tmp.
+
+* Generic grub support
+
+   This will generate a much nicer menu.lst as a side effect, as its
+   currently generated once at install, and is never updated. Installing
+   a full grub into the domU should update the menu.lst every time a
+   new kernel is installed and will also use the domU distro's menu.lst
+   conform.
+
+* pv-grub support
+
+   This is a ways away and will probably start with a xen-pv-grub
+   package.
+
+* Move the hooks directory to /etc/xen-tools/ to officially allow
+   added and modified hooks.
+
+* Clean up the hooks directory
+
+   We still have a link farm for hooks and a meta link farm for distro
+   releases created on "make install". It probably would be better if
+   we would just have one directory per distro (like with debian) but
+   without the need to created symlinks on "make install"
+
+   Currently CentOS's 25-setup-kernel creates an fstab and
+   90-make-fstab does again. It works, but that cries for debugging
+   hell.
+
+   centos-5/25-setup-kernel centos-6/25-setup-kernel still differ and
+   I'm not sure if that's necessary respectively what's the common
+   denominator.
+
+   80-install-kernel is not yet merged into one hook script.
+
+   Common oneliners for code deduplication in the hooks/ directory:
+
+   $ find -L . -not -xtype l -not -type d -not -path '*/common/*' | sort -t / -k3
+   $ fdupes -r1 . | sort -t / -k3
+   $ find . -type f | sim_text -ipTt 50 | tac | column -t
+
+
+* Create users, add ssh pubkeys to .ssh/authorized_keys
+
+   Still have to think of a good way of doing this. It would be nice
+   To specify a directory of public keys, parsing the hostnames
+   parsing the usernames from the ssh comment line
+
+* More generic roles
+
+   Deploy a web server or setup ssmtp directly via flag when setting up
+   the machine. Open to suggestions, should just be some general use-cases
+   that are fairly common.
+
+* Sections for the xen-tools.conf file
+
+   Currently it's really annoying when you are trying to create VMs
+   on multiple subnets. It would be nice to specify with a flag what
+   "type" of configuration you want, and a set of options specific to
+   that flag could be parsed from xen-tools.conf
+
+* Refactor the code for less variants of calling cp, rm, mv, etc.
+
+   E.g. always use either cp() from File::Copy or /bin/cp, but not
+   both. To allow verbose copying, I (Axel) would prefer /bin/cp over
+   cp();
+
+* Parse numerical parameters transparently for the user
+
+   The user shouldn't have to know weather he should specify size
+   as <size>G or <size>Gb or <size>. This should be parsed without
+   user interaction and rely on a common format.
+
+* xen-update-image should mount /dev/pts before running apt-get
+
+* xen-update-image should have options for using ...
+
+   ... aptitude instead of apt-get
+
+   ... dist-upgrade instead of upgrade
+
+* Support cpu_weight and other features from
+  http://wiki.xensource.com/xenwiki/CreditScheduler
+
+* Code Deduplication / Refactor the code for less code duplication
+
+   bin/x* currently contain the same or similar code like e.g. in the
+   function readConfigurationFile. This needs to be cleaned up.
+
+* Use Perl::Critic
+
+Stuff from Steve's TODO list / Generic TODOs
+--------------------------------------------
+
+* Write more test cases.
+
+* xen-delete-image should unallocate any used IP addresses.
+
+Axel's Break-Backwards-Compatibility Wishlist
+---------------------------------------------
+
+* Make empty extension the default
+
+   This would ease tab completion and CLI parameter reusage with "xm
+   create" and friends.
+
+* Check if we can reduce MAKEDEV invocations in hooks/common/55-create-dev
+
+   MAKEDEV std is called in any case. First comment says "Early
+   termination if we have a couple of common devices present should
+   speed up installs which use --copy/--tar" and then "We still need
+   to make sure the basic devices are present" and calls MAKEDEV more
+   often than otherwise.
+
+   Additionally the 55-create-dev for CentOS/Fedora just created
+   console, zero and null. zero and null are part of "MAKEDEV std",
+   perhaps can we reduce it to that. console is part of "MAKEDEV
+   generic".
+
+   Additionally the devices hda, sda and tty1 may not necessary in any
+   case, but instead hvc0 should be created for sure in many
+   cases. Nothing cares about $serial_device there either.
+
+   Current MAKEDEV implementation support more than one device as
+   parameter. That could reduce the MAKEDEV calls from currently six
+   to two.
--- a/bin/xen-create-image
+++ b/bin/xen-create-image
--- a/bin/xen-create-nfs
+++ b/bin/xen-create-nfs
@@ -19,8 +19,9 @@ xen-create-nfs - Create a Xen configuration file for an NFS-root guest.
   --dhcp       Configure the guest to use DHCP for IP allocation.
   --gateway    The gateway address to use when configured with a static IP.
   --hostname   The hostname to configure for the guest.
-   --netmask    The netmask to use when configured with a static IP.
   --ip         The IP address to use when configured with a static IP.
+   --netmask    The netmask to use when configured with a static IP.
+   --nameserver The nameserver to use when configured with a static IP.

  General options:
   --admins     Specify which users should be setup as xen-shell admins.
@@ -83,18 +84,18 @@ Show the version number and exit.
 =cut


-=head1 AUTHOR
+=head1 AUTHORS

- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Stéphane Jourdois

 =cut


 =head1 LICENSE

-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.

 This module is free software;
 you can redistribute it and/or modify it under
@@ -124,17 +125,17 @@ my %CONFIG;
 #
 #  Default options
 #
-$CONFIG{'template'} = '/etc/xen-tools/xm-nfs.tmpl';
+$CONFIG{ 'template' } = '/etc/xen-tools/xm-nfs.tmpl';


 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '4.3';


 # store version number away.
-$CONFIG{'xen_tools_version'} = $RELEASE;
+$CONFIG{ 'xen_tools_version' } = $RELEASE;


 #
@@ -161,13 +162,13 @@ testArguments();
 if ( -e "/etc/xen/$CONFIG{'hostname'}.cfg" )
 {
    die "Configuration file for $CONFIG{'hostname'} already exists"
-      unless ( $CONFIG{'force'} );
+      unless ( $CONFIG{ 'force' } );
 }

 #
 #  If we've been given any administrators then set them up.
 #
-if ( $CONFIG{'admins'} )
+if ( $CONFIG{ 'admins' } )
 {
    setupAdminUsers();
 }
@@ -258,7 +259,7 @@ sub readConfigurationFile
            }

            # Store value.
-            $CONFIG{$key} = $val;
+            $CONFIG{ $key } = $val;
        }
    }

@@ -288,30 +289,31 @@ sub parseCommandLineArguments
    GetOptions(

        # Networking options
-        "dhcp",        \$CONFIG{'dhcp'},
-        "gateway=s",   \$CONFIG{'gateway'},
-        "broadcast=s", \$CONFIG{'broadcast'},
-        "ip=s",        \$CONFIG{'ip'},
-        "netmask=s",   \$CONFIG{'netmask'},
-        "hostname=s",  \$CONFIG{'hostname'},
-        "memory=s",    \$CONFIG{'memory'},
-        "mac=s",       \$CONFIG{'mac'},
+        "dhcp",         \$CONFIG{ 'dhcp' },
+        "gateway=s",    \$CONFIG{ 'gateway' },
+        "broadcast=s",  \$CONFIG{ 'broadcast' },
+        "ip=s",         \$CONFIG{ 'ip' },
+        "netmask=s",    \$CONFIG{ 'netmask' },
+        "nameserver=s", \$CONFIG{ 'nameserver' },
+        "hostname=s",   \$CONFIG{ 'hostname' },
+        "memory=s",     \$CONFIG{ 'memory' },
+        "mac=s",        \$CONFIG{ 'mac' },

        # NFS options.
-        "nfs_server=s", \$CONFIG{'nfs_server'},
-        "nfs_root=s",   \$CONFIG{'nfs_root'},
+        "nfs_server=s", \$CONFIG{ 'nfs_server' },
+        "nfs_root=s",   \$CONFIG{ 'nfs_root' },

        # Misc. options
-        "admins=s",   \$CONFIG{'admins'},
-        "kernel=s",   \$CONFIG{'kernel'},
-        "initrd=s",   \$CONFIG{'initrd'},
-        "force",      \$CONFIG{'force'},
-        "template=s", \$CONFIG{'template'},
+        "admins=s",   \$CONFIG{ 'admins' },
+        "kernel=s",   \$CONFIG{ 'kernel' },
+        "initrd=s",   \$CONFIG{ 'initrd' },
+        "force",      \$CONFIG{ 'force' },
+        "template=s", \$CONFIG{ 'template' },

        # Help options
        "help",    \$HELP,
        "manual",  \$MANUAL,
-        "verbose", \$CONFIG{'verbose'},
+        "verbose", \$CONFIG{ 'verbose' },
        "version", \$VERSION

    );
@@ -349,35 +351,59 @@ sub testArguments
    #
    #  Hostname is mandatory
    #
-    die "No hostname" unless ( $CONFIG{'hostname'} );
+    die "No hostname" unless ( $CONFIG{ 'hostname' } );

    my @network = qw/ ip gateway netmask /;

    #
    #  If DHCP then all the other options aren't needed
    #
-    if ( $CONFIG{'dhcp'} )
+    if ( $CONFIG{ 'dhcp' } )
    {
        foreach my $f (@network)
        {
-            delete( $CONFIG{$f} );
+            delete( $CONFIG{ $f } );
        }
    }
    else
    {
        foreach my $f (@network)
        {
-            die "Missing --$f" unless ( $CONFIG{$f} );
+            die "Missing --$f" unless ( $CONFIG{ $f } );
        }
    }

    #
    #  We need an NFS server + root
    #
-    die "Missing NFS server." unless ( $CONFIG{'nfs_server'} );
-    die "Missing NFS root."   unless ( $CONFIG{'nfs_root'} );
+    die "Missing NFS server." unless ( $CONFIG{ 'nfs_server' } );
+    die "Missing NFS root."   unless ( $CONFIG{ 'nfs_root' } );


+    # Shorthack to fix http://bugs.debian.org/648814 -- xen-create-nfs
+    # should better use xt-create-xen-config instead. Guess from where
+    # this code is borrowed for now...
+
+    if ( exists($CONFIG{ 'memory' }) and
+         defined($CONFIG{ 'memory' }) ) {
+
+        #
+        #  The memory size:  Convert Gb -> Mb.
+        #
+        if ( $CONFIG{ 'memory' } =~ /^(\d+)Gb.*$/i )
+        {
+            $CONFIG{ 'memory' } = $1 * 1024;
+        }
+
+        #
+        #  Remove any trailing Mb.
+        #
+        if ( $CONFIG{ 'memory' } =~ /^(\d+)Mb.*$/i )
+        {
+            $CONFIG{ 'memory' } = $1;
+        }
+
+    }
    # All OK.
 }

@@ -420,7 +446,7 @@ sub setupAdminUsers
    #  For each user make sure they exist, and setup the
    # login shell for them.
    #
-    foreach my $user ( split( /,/, $ENV{'admins'} ) )
+    foreach my $user ( split( /,/, $ENV{ 'admins' } ) )
    {

        # Strip leading and trailing whitespace.
@@ -435,22 +461,22 @@ sub setupAdminUsers
        {

            # Change shell.
-            $CONFIG{'verbose'} && print "Changing shell for $user: $shell\n";
+            $CONFIG{ 'verbose' } && print "Changing shell for $user: $shell\n";
            system( "chsh", "-s", $shell, $user );
        }
        else
        {

            # Add a new user.
-            $CONFIG{'verbose'} && print "Adding new user: $user\n";
+            $CONFIG{ 'verbose' } && print "Adding new user: $user\n";
            system( "useradd", "-s", $shell, $user );
        }

        #
        #  Add the entry to /etc/sudoers.
        #
-        open( SUDOERS, ">>", "/etc/sudoers" )
-          or warn "Failed to add user to sudoers file : $user - $!";
+        open( SUDOERS, ">>", "/etc/sudoers" ) or
+          warn "Failed to add user to sudoers file : $user - $!";
        print SUDOERS
          "$user ALL = NOPASSWD: /usr/sbin/xm, /usr/bin/xen-create-image\n";
        close(SUDOERS);
@@ -470,13 +496,13 @@ sub setupAdminUsers
 sub createNewConfigurationFile
 {
    die "Template file missing: $CONFIG{'template'}"
-      unless ( -e $CONFIG{'template'} );
+      unless ( -e $CONFIG{ 'template' } );

    #
    #  Load the template.
    #
    my $template = new Text::Template( TYPE   => 'FILE',
-                                       SOURCE => $CONFIG{'template'} );
+                                       SOURCE => $CONFIG{ 'template' } );

    my $result = $template->fill_in( HASH => \%CONFIG );

--- a/bin/xen-delete-image
+++ b/bin/xen-delete-image
@@ -16,8 +16,8 @@ xen-delete-image - Delete previously created Xen instances.

  General options:
   --dir      Specify the output directory where images were previously saved.
-   --lvm      Specify the LVM volume to use.
   --evms     Specify the EVMS container to use.
+   --lvm      Specify the LVM volume to use.

  Specifying hosts:
   --hostname Specify the image name to delete.
@@ -51,7 +51,7 @@ Specify the LVM volume group where images were previously saved.
 Read the manual for this script.

 =item B<--test>
-Don not complain, or exit, if the script is not executed by the root user.
+Do not complain, or exit, if the script is not executed by the root user.

 =item B<--version>
 Show the version number and exit.
@@ -130,18 +130,19 @@ Show the version number and exit.
 =cut


-=head1 AUTHOR
+=head1 AUTHORS

- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois

 =cut


 =head1 LICENSE

-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.

 This module is free software;
 you can redistribute it and/or modify it under
@@ -156,6 +157,7 @@ use strict;
 use English;
 use Getopt::Long;
 use Pod::Usage;
+use File::Path;


 #
@@ -169,7 +171,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '4.3';



@@ -198,7 +200,7 @@ checkArguments();
 #
 #  Abort if non-root user.
 #
-if ( ( !$CONFIG{'test'} ) && ( $EFFECTIVE_USER_ID != 0 ) )
+if ( ( !$CONFIG{ 'test' } ) && ( $EFFECTIVE_USER_ID != 0 ) )
 {
    print <<E_O_ROOT;

@@ -231,7 +233,7 @@ while ( my $name = shift )
 #
 #  Also delete any which were specified using the --hostname flag
 #
-my $hosts = $CONFIG{'hostname'};
+my $hosts = $CONFIG{ 'hostname' };
 foreach my $name (@$hosts)
 {
    if ( !xenRunning($name) )
@@ -318,7 +320,7 @@ sub readConfigurationFile
            }

            # Store value.
-            $CONFIG{$key} = $val;
+            $CONFIG{ $key } = $val;
        }
    }

@@ -340,20 +342,21 @@ sub parseCommandLineArguments
    my $HELP    = 0;
    my $MANUAL  = 0;
    my $VERSION = 0;
+    $CONFIG{ 'dry-run' } = 0;

    #  Parse options.
    #
-    GetOptions(
-                "dir=s",       \$CONFIG{'dir'},
-                "lvm=s",       \$CONFIG{'lvm'},
-                "evms=s",      \$CONFIG{'evms'},
-                "hostname=s@", \$CONFIG{'hostname'},
-                "test",        \$CONFIG{'test'},
-                "verbose",     \$CONFIG{'verbose'},
+    GetOptions( "dir=s",       \$CONFIG{ 'dir' },
+                "dry-run",     \$CONFIG{ 'dry-run' },
+                "lvm=s",       \$CONFIG{ 'lvm' },
+                "evms=s",      \$CONFIG{ 'evms' },
+                "hostname=s@", \$CONFIG{ 'hostname' },
+                "test",        \$CONFIG{ 'test' },
+                "verbose",     \$CONFIG{ 'verbose' },
                "help",        \$HELP,
                "manual",      \$MANUAL,
                "version",     \$VERSION
-    );
+              );

    pod2usage(1) if $HELP;
    pod2usage( -verbose => 2 ) if $MANUAL;
@@ -390,10 +393,10 @@ sub checkArguments
    #
    #  When testing we only care about loopback images, not disk images.
    #
-    if ( $CONFIG{'test'} )
+    if ( $CONFIG{ 'test' } )
    {
-        $CONFIG{'lvm'}  = undef;
-        $CONFIG{'evms'} = undef;
+        $CONFIG{ 'lvm' }  = undef;
+        $CONFIG{ 'evms' } = undef;
    }

    #
@@ -402,7 +405,7 @@ sub checkArguments
    my $count = 0;
    foreach my $type (qw/dir lvm evms/)
    {
-        $count += 1 if defined( $CONFIG{$type} );
+        $count += 1 if defined( $CONFIG{ $type } );
    }

    #
@@ -411,7 +414,7 @@ sub checkArguments
    #
    if ( $count != 1 )
    {
-        print "Please select one and only one of the installation methods:\n";
+        print "Please select one and only one of the installation methods to delete the DomU:\n";
        print " --dir\n";
        print " --evms\n";
        print " --lvm\n";
@@ -435,8 +438,8 @@ sub xenRunning

    my $running = 0;

-    open( CMD, "xm list $hostname 2>/dev/null |" )
-      or die "Failed to run 'xm list $hostname'";
+    open( CMD, "xm list $hostname 2>/dev/null |" ) or
+      die "Failed to run 'xm list $hostname'";
    while (<CMD>)
    {
        my $line = $_;
@@ -489,8 +492,12 @@ sub deleteXenImage
    {
        if ( -e $file )
        {
-            print "Deleting: $file\n";
-            unlink($file);
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would delete: $file\n";
+            } else {
+                print "Deleting: $file\n";
+                unlink($file);
+            }
        }
        else
        {
@@ -499,20 +506,24 @@ sub deleteXenImage
    }


-    if ( defined( $CONFIG{'dir'} ) )
+    if ( defined( $CONFIG{ 'dir' } ) )
    {
-        my $prefix = $CONFIG{'dir'} . "/domains/";
+        my $prefix = $CONFIG{ 'dir' } . "/domains/";

        #
        #  Now remove the directory.
        #
        if ( -d $prefix . $hostname )
        {
-            print "Removing: " . $prefix . $hostname . "\n";
-            rmdir( $prefix . $hostname );
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would delete: $prefix$hostname\n";
+            } else {
+                print "Removing: " . $prefix . $hostname . "\n";
+                rmtree( $prefix . $hostname );
+            }
        }
    }
-    elsif ( defined( $CONFIG{'lvm'} ) )
+    elsif ( defined( $CONFIG{ 'lvm' } ) )
    {

        #
@@ -524,18 +535,26 @@ sub deleteXenImage

        if ( -e "/dev/$CONFIG{'lvm'}/$hostname-swap" )
        {
-            print "Removing swap volume\n";
-            runCommand("lvremove /dev/$CONFIG{'lvm'}/$hostname-swap --force");
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would remove LVM swap volume /dev/$CONFIG{'lvm'}/$hostname-swap\n";
+            } else {
+                print "Removing swap volume\n";
+                runCommand("lvremove /dev/$CONFIG{'lvm'}/$hostname-swap --force");
+            }
        }

        if ( -e "/dev/$CONFIG{'lvm'}/$hostname-disk" )
        {
-            print "Removing LVM disk volume\n";
-            runCommand("lvremove /dev/$CONFIG{'lvm'}/$hostname-disk --force");
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would remove LVM disk volume /dev/$CONFIG{'lvm'}/$hostname-disk\n";
+            } else {
+                print "Removing LVM disk volume\n";
+                runCommand("lvremove /dev/$CONFIG{'lvm'}/$hostname-disk --force");
+            }
        }

    }
-    elsif ( defined( $CONFIG{'evms'} ) )
+    elsif ( defined( $CONFIG{ 'evms' } ) )
    {

        #
@@ -547,16 +566,26 @@ sub deleteXenImage

        if ( -e "/dev/evms/$hostname-swap" )
        {
-            print "Removing EVMS swap volume\n";
-            runCommand("echo Delete : /dev/evms/$hostname-swap | evms");
-            runCommand("echo Delete : $CONFIG{'evms'}/$hostname-swap | evms");
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would remove EVMS swap volume: /dev/evms/$hostname-swap\n";
+                print "Would remove EVMS swap volume: $CONFIG{'evms'}/$hostname-swap\n";
+            } else {
+                print "Removing EVMS swap volume\n";
+                runCommand("echo Delete : /dev/evms/$hostname-swap | evms");
+                runCommand("echo Delete : $CONFIG{'evms'}/$hostname-swap | evms");
+            }
        }

        if ( -e "/dev/evms/$hostname-disk" )
        {
-            print "Removing EVMS disk volume\n";
-            runCommand("echo Delete : /dev/evms/$hostname-disk | evms");
-            runCommand("echo Delete : $CONFIG{'evms'}/$hostname-disk | evms");
+            if ($CONFIG{ 'dry-run' }) {
+                print "Would remove EVMS disk volume: /dev/evms/$hostname-swap\n";
+                print "Would remove EVMS disk volume: $CONFIG{'evms'}/$hostname-swap\n";
+            } else {
+                print "Removing EVMS disk volume\n";
+                runCommand("echo Delete : /dev/evms/$hostname-disk | evms");
+                runCommand("echo Delete : $CONFIG{'evms'}/$hostname-disk | evms");
+            }
        }

    }
@@ -589,12 +618,12 @@ sub runCommand
    #
    #  Header.
    #
-    $CONFIG{'verbose'} && print "Executing : $cmd\n";
+    $CONFIG{ 'verbose' } && print "Executing : $cmd\n";

    #
    #  Hide output unless running with --debug.
    #
-    if ( $CONFIG{'verbose'} )
+    if ( $CONFIG{ 'verbose' } )
    {

        #
@@ -624,10 +653,10 @@ sub runCommand
    #
    # All done.
    #
-    $CONFIG{'verbose'} && print "Output\n";
-    $CONFIG{'verbose'} && print "======\n";
-    $CONFIG{'verbose'} && print $output . "\n";
-    $CONFIG{'verbose'} && print "Finished : $cmd\n";
+    $CONFIG{ 'verbose' } && print "Output\n";
+    $CONFIG{ 'verbose' } && print "======\n";
+    $CONFIG{ 'verbose' } && print $output . "\n";
+    $CONFIG{ 'verbose' } && print "Finished : $cmd\n";

    return ($output);
 }
--- a/bin/xen-list-images
+++ b/bin/xen-list-images
@@ -58,18 +58,17 @@ Show the version number and exit.
 =cut


-=head1 AUTHOR
+=head1 AUTHORS

- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Stéphane Jourdois

 =cut

-
 =head1 LICENSE

-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.

 This module is free software;
 you can redistribute it and/or modify it under
@@ -97,12 +96,12 @@ my %CONFIG;
 #
 #  Default prefix
 #
-$CONFIG{'prefix'} = "/etc/xen";
+$CONFIG{ 'prefix' } = "/etc/xen";

 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '4.3';



@@ -131,7 +130,7 @@ my @instances = findXenInstances();
 my $count = 0;
 foreach my $instance (@instances)
 {
-    if ($count) { print "\n"; }
+    if ($count) {print "\n";}

    displayInstance($instance);
    $count += 1;
@@ -214,7 +213,7 @@ sub readConfigurationFile
            }

            # Store value.
-            $CONFIG{$key} = $val;
+            $CONFIG{ $key } = $val;
        }
    }
    close(FILE);
@@ -238,8 +237,10 @@ sub parseCommandLineArguments

    #  Parse options.
    #
-    GetOptions( "test=s", \$CONFIG{'prefix'}, "help", \$HELP, "manual",
-                \$MANUAL, "version", \$VERSION );
+    GetOptions( "test=s", \$CONFIG{ 'prefix' },
+                "help", \$HELP,
+                "manual", \$MANUAL,
+                "version", \$VERSION );

    pod2usage(1) if $HELP;
    pod2usage( -verbose => 2 ) if $MANUAL;
@@ -273,7 +274,7 @@ sub findXenInstances
 {
    my @found;

-    foreach my $file ( sort( glob( $CONFIG{'prefix'} . "/*.cfg" ) ) )
+    foreach my $file ( sort( glob( $CONFIG{ 'prefix' } . "/*.cfg" ) ) )
    {
        push @found, $file if ( -e $file );
    }
--- a/bin/xen-resize-guest
+++ b/bin/xen-resize-guest
@@ -76,18 +76,18 @@ Show the version number and exit.

 =cut

-=head1 AUTHOR
+=head1 AUTHORS

- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/

 =cut


 =head1 LICENSE

-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.

 This module is free software;
 you can redistribute it and/or modify it under
@@ -116,7 +116,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '4.3';



@@ -143,13 +143,14 @@ testArguments();
 #
 my $path = undef;

-if ( $CONFIG{'dir'} )
+if ( $CONFIG{ 'dir' } )
 {

    #
    #  Make sure we can find the disk
    #
-    $path = $CONFIG{'dir'} . "/domains/" . $CONFIG{'hostname'} . "/disk.img";
+    $path =
+      $CONFIG{ 'dir' } . "/domains/" . $CONFIG{ 'hostname' } . "/disk.img";
    if ( !-e $path )
    {
        print <<EOF;
@@ -187,7 +188,7 @@ EOF
    #
    #  Allow panic
    #
-    if ( !$CONFIG{'force'} )
+    if ( !$CONFIG{ 'force' } )
    {
        foreach my $i ( 1 .. 10 )
        {
@@ -202,13 +203,13 @@ EOF
    my $cmd = "dd if=/dev/zero bs=1M count=$CONFIG{'add'}k >> $path";
    system($cmd );
 }
-elsif ( $CONFIG{'lvm'} )
+elsif ( $CONFIG{ 'lvm' } )
 {

    #
    #  Make sure we can find the disk
    #
-    $path = "/dev/" . $CONFIG{'lvm'} . "/" . $CONFIG{'hostname'} . "-disk";
+    $path = "/dev/" . $CONFIG{ 'lvm' } . "/" . $CONFIG{ 'hostname' } . "-disk";
    if ( !-e $path )
    {
        print <<EOF;
@@ -246,7 +247,7 @@ EOF
    #
    #  Allow panic
    #
-    if ( !$CONFIG{'force'} )
+    if ( !$CONFIG{ 'force' } )
    {
        foreach my $i ( 1 .. 10 )
        {
@@ -300,6 +301,9 @@ sub readConfigurationFile
 {
    my ($file) = (@_);

+    # Don't read the file if it doesn't exist.
+    return if ( !-e $file );
+
    open( FILE, "<", $file ) or die "Cannot read file '$file' - $!";

    my $line = "";
@@ -355,7 +359,7 @@ sub readConfigurationFile
            }

            # Store value.
-            $CONFIG{$key} = $val;
+            $CONFIG{ $key } = $val;
        }
    }

@@ -389,16 +393,16 @@ sub parseCommandLineArguments
    GetOptions(

        # Misc. options
-        "add=s",      \$CONFIG{'add'},
-        "dir=s",      \$install{'dir'},
-        "lvm=s",      \$install{'lvm'},
-        "hostname=s", \$CONFIG{'hostname'},
-        "force",      \$CONFIG{'force'},
+        "add=s",      \$CONFIG{ 'add' },
+        "dir=s",      \$install{ 'dir' },
+        "lvm=s",      \$install{ 'lvm' },
+        "hostname=s", \$CONFIG{ 'hostname' },
+        "force",      \$CONFIG{ 'force' },

        # Help options
        "help",    \$HELP,
        "manual",  \$MANUAL,
-        "verbose", \$CONFIG{'verbose'},
+        "verbose", \$CONFIG{ 'verbose' },
        "version", \$VERSION
    );

@@ -417,17 +421,17 @@ sub parseCommandLineArguments
    # they will allow the configuration values to be overriden by
    # the command line.
    #
-    if ( $install{'lvm'} )
+    if ( $install{ 'lvm' } )
    {
-        $CONFIG{'lvm'} = $install{'lvm'};
-        $CONFIG{'dir'} = undef;
-        delete $CONFIG{'dir'};
+        $CONFIG{ 'lvm' } = $install{ 'lvm' };
+        $CONFIG{ 'dir' } = undef;
+        delete $CONFIG{ 'dir' };
    }
-    if ( $install{'dir'} )
+    if ( $install{ 'dir' } )
    {
-        $CONFIG{'dir'} = $install{'dir'};
-        $CONFIG{'lvm'} = undef;
-        delete $CONFIG{'lvm'};
+        $CONFIG{ 'dir' } = $install{ 'dir' };
+        $CONFIG{ 'lvm' } = undef;
+        delete $CONFIG{ 'lvm' };
    }
 }

@@ -447,7 +451,7 @@ sub testArguments
    #
    #  Make sure we received a hostname.
    #
-    if ( !$CONFIG{'hostname'} )
+    if ( !$CONFIG{ 'hostname' } )
    {
        print <<EOF;

@@ -462,7 +466,7 @@ EOF
    #
    #  Make sure we received a size.
    #
-    if ( !$CONFIG{'add'} )
+    if ( !$CONFIG{ 'add' } )
    {
        print <<EOF;

@@ -478,7 +482,7 @@ EOF
    #
    #  Make sure the guest isn't running
    #
-    if ( xenRunning( $CONFIG{'hostname'} ) )
+    if ( xenRunning( $CONFIG{ 'hostname' } ) )
    {
        print "The guest $CONFIG{'hostname'} appears to be running!\n";
        exit 1;
@@ -488,8 +492,10 @@ EOF
    #  We should either have LVM *or* directory - not neither or both.
    #
    my $options = 0;
-    $options += 1 if ( defined( $CONFIG{'lvm'} ) && length( $CONFIG{'lvm'} ) );
-    $options += 1 if ( defined( $CONFIG{'dir'} ) && length( $CONFIG{'dir'} ) );
+    $options += 1
+      if ( defined( $CONFIG{ 'lvm' } ) && length( $CONFIG{ 'lvm' } ) );
+    $options += 1
+      if ( defined( $CONFIG{ 'dir' } ) && length( $CONFIG{ 'dir' } ) );

    #
    #  Report
@@ -508,13 +514,13 @@ EOF
    #
    #  Convert from Gb -> Mb;
    #
-    if ( $CONFIG{'add'} =~ /^([0-9.]+)Gb*$/i )
+    if ( $CONFIG{ 'add' } =~ /^([0-9.]+)Gb*$/i )
    {
-        $CONFIG{'add'} = $1 * 1024;
+        $CONFIG{ 'add' } = $1 * 1024;
    }
-    if ( $CONFIG{'add'} =~ /^([0-9.]+)Mb*$/i )
+    if ( $CONFIG{ 'add' } =~ /^([0-9.]+)Mb*$/i )
    {
-        $CONFIG{'add'} = $1;
+        $CONFIG{ 'add' } = $1;
    }
 }

@@ -534,8 +540,8 @@ sub xenRunning

    my $running = 0;

-    open( CMD, "xm list $hostname 2>/dev/null |" )
-      or die "Failed to run 'xm list $hostname'";
+    open( CMD, "xm list $hostname 2>/dev/null |" ) or
+      die "Failed to run 'xm list $hostname'";
    while (<CMD>)
    {
        my $line = $_;
--- a/bin/xen-update-image
+++ b/bin/xen-update-image
@@ -80,19 +80,18 @@ Show the version number and exit.
 =cut


-=head1 AUTHOR
+=head1 AUTHORS

-
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois

 =cut

-
 =head1 LICENSE

-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.

 This module is free software;
 you can redistribute it and/or modify it under
@@ -105,6 +104,7 @@ The LICENSE file contains the full text of the license.
 use strict;
 use English;
 use File::Temp qw/ tempdir /;
+use File::Copy qw/ mv cp /;
 use Getopt::Long;
 use Pod::Usage;

@@ -120,7 +120,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '4.3';


 #
@@ -210,11 +210,11 @@ sub updateXenImage
    #  If we're dealing with loopback images find the main one,
    # and mount it.
    #
-    if ( $CONFIG{'dir'} )
+    if ( $CONFIG{ 'dir' } )
    {

        # The loopback image.
-        $img = $CONFIG{'dir'} . "/domains/" . $name . "/disk.img";
+        $img = $CONFIG{ 'dir' } . "/domains/" . $name . "/disk.img";

        if ( !-e $img )
        {
@@ -224,11 +224,11 @@ sub updateXenImage

        $mount_cmd = "mount -t auto -o loop $img $tmp";
    }
-    elsif ( $CONFIG{'lvm'} )
+    elsif ( $CONFIG{ 'lvm' } )
    {

        # The LVM volume
-        $img = "/dev/" . $CONFIG{'lvm'} . "/$name-disk";
+        $img = "/dev/" . $CONFIG{ 'lvm' } . "/$name-disk";

        # make sure it exists.
        if ( !-e $img )
@@ -239,22 +239,27 @@ sub updateXenImage

        $mount_cmd = "mount -t auto $img $tmp";
    }
-    elsif ( $CONFIG{'evms'} )
+    elsif ( $CONFIG{ 'evms' } )
    {

-# The EVMS volume  -- note, unlike LVM, you don't need the $CONFIG{'evms'}
-# to see it and mount the volume. $CONFIG{'evms'} is only used for manipulating
-# the underlying object.  Still, I don't want to mess with the parse code and
-# make it confusing - otherwise --evms takes an argument everywhere but here,
-# which will confuse users.  The better solution is to make it so that --evms can
-# take a following container, but doesn't require it.  For the moment, it is
-# better to leave it as it is, take a container, and then ignore it.
+        # The EVMS volume -- note, unlike LVM, you don't need the
+        # $CONFIG{'evms'} to see it and mount the
+        # volume. $CONFIG{'evms'} is only used for manipulating the
+        # underlying object.  Still, I don't want to mess with the
+        # parse code and make it confusing - otherwise --evms takes an
+        # argument everywhere but here, which will confuse users.  The
+        # better solution is to make it so that --evms can take a
+        # following container, but doesn't require it.  For the
+        # moment, it is better to leave it as it is, take a container,
+        # and then ignore it.

- # The best way to do it is to just read it out of the configuration file,
- # tell the user what you got and where you got it from, and not bother the user
- # with picking --dir or --lvm or --evms at all, but infer it from the config
- # file's disk = parameter.  xen-delete-image might work the same way, but
- # it could be *slightly* more dangerous in the context of deleting.
+        # The best way to do it is to just read it out of the
+        # configuration file, tell the user what you got and where you
+        # got it from, and not bother the user with picking --dir or
+        # --lvm or --evms at all, but infer it from the config file's
+        # disk = parameter.  xen-delete-image might work the same way,
+        # but it could be *slightly* more dangerous in the context of
+        # deleting.
        $img = "/dev/evms/$name-disk";

        # make sure it exists.
@@ -279,9 +284,14 @@ sub updateXenImage
    #
    #  Make sure this is a Debian image.
    #
-    if (    ( -e $tmp . "/usr/bin/apt-get" )
-         && ( -x $tmp . "/usr/bin/apt-get" ) )
+    if ( ( -e $tmp . "/usr/bin/apt-get" ) &&
+         ( -x $tmp . "/usr/bin/apt-get" ) )
    {
+        #
+        #  Copy dom0's resolv.conf to domU
+        #
+        mv("$tmp/etc/resolv.conf", "$tmp/etc/resolv.conf.old") if -f "$tmp/etc/resolv.conf";
+        cp("/etc/resolv.conf", "$tmp/etc/resolv.conf");

        #
        #  Now run the update command.
@@ -293,8 +303,17 @@ sub updateXenImage
        #  Now upgrade
        #
        system(
-"DEBIAN_FRONTEND=noninteractive  chroot $tmp /usr/bin/apt-get upgrade --yes --force-yes"
+            "DEBIAN_FRONTEND=noninteractive  chroot $tmp /usr/bin/apt-get upgrade --yes --force-yes"
        );
+
+        #
+        #  Restore domU's resolv.conf if needed
+        #
+        if (-f "$tmp/etc/resolv.conf") {
+            mv("$tmp/etc/resolv.conf.old", "$tmp/etc/resolv.conf");
+        } else {
+            unlink "$tmp/etc/resolv.conf";
+        }
    }
    else
    {
@@ -326,8 +345,8 @@ sub xenRunning

    my $running = 0;

-    open( CMD, "xm list 2>/dev/null |" )
-      or die "Failed to run 'xm list $hostname'";
+    open( CMD, "xm list 2>/dev/null |" ) or
+      die "Failed to run 'xm list $hostname'";
    while (<CMD>)
    {
        my $line = $_;
@@ -407,7 +426,7 @@ sub readConfigurationFile
            }

            # Store value.
-            $CONFIG{$key} = $val;
+            $CONFIG{ $key } = $val;
        }
    }

@@ -432,11 +451,12 @@ sub parseCommandLineArguments

    #  Parse options.
    #
-    GetOptions(
-                "dir=s",  \$CONFIG{'dir'},  "lvm=s",   \$CONFIG{'lvm'},
-                "evms=s", \$CONFIG{'evms'}, "help",    \$HELP,
-                "manual", \$MANUAL,         "version", \$VERSION
-    );
+    GetOptions( "dir=s",  \$CONFIG{ 'dir' },
+                "lvm=s",   \$CONFIG{ 'lvm' },
+                "evms=s", \$CONFIG{ 'evms' },
+                "help",    \$HELP,
+                "manual", \$MANUAL,
+                "version", \$VERSION );

    pod2usage(1) if $HELP;
    pod2usage( -verbose => 2 ) if $MANUAL;
@@ -475,7 +495,7 @@ sub checkArguments
    my $count = 0;
    foreach my $type (qw/dir lvm evms/)
    {
-        $count += 1 if defined( $CONFIG{$type} );
+        $count += 1 if defined( $CONFIG{ $type } );
    }

    #
--- a/bin/xt-create-xen-config
+++ b/bin/xt-create-xen-config
@@ -104,19 +104,18 @@ xt-create-config - Create a Xen configuration file for a new guest

 =cut

+=head1 AUTHORS

-=head1 AUTHOR
-
- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois

 =cut

-
 =head1 LICENSE

-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010-2012 by The Xen-Tools
+Development Team. All rights reserved.

 This module is free software;
 you can redistribute it and/or modify it under
@@ -150,13 +149,14 @@ my @PARTITIONS = undef;
 #
 #  Default options
 #
-$CONFIG{'template'} = '/etc/xen-tools/xm.tmpl';
+$CONFIG{ 'template' } = '/etc/xen-tools/xm.tmpl';
+$CONFIG{ 'extension' } = '.cfg';


 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '4.3';



@@ -175,7 +175,7 @@ checkArguments();
 #
 #  If we've been given any administrators then set them up.
 #
-if ( $ENV{'admins'} )
+if ( $ENV{ 'admins' } )
 {
    setupAdminUsers();
 }
@@ -213,16 +213,15 @@ sub parseCommandLineArguments
    #
    #  Parse options.
    #
-    GetOptions(
-                "admins=s",    \$ENV{'admins'},
-                "output=s",    \$CONFIG{'output'},
-                "extension=s", \$CONFIG{'extension'},
-                "template=s",  \$CONFIG{'template'},
-                "verbose",     \$CONFIG{'verbose'},
+    GetOptions( "admins=s",    \$ENV{ 'admins' },
+                "output=s",    \$CONFIG{ 'output' },
+                "extension=s", \$CONFIG{ 'extension' },
+                "template=s",  \$CONFIG{ 'template' },
+                "verbose",     \$CONFIG{ 'verbose' },
                "help",        \$HELP,
                "manual",      \$MANUAL,
                "version",     \$VERSION
-    );
+              );

    pod2usage(1) if $HELP;
    pod2usage( -verbose => 2 ) if $MANUAL;
@@ -257,7 +256,7 @@ sub checkArguments
    #
    #  We require an output location.
    #
-    if ( !defined( $CONFIG{'output'} ) )
+    if ( !defined( $CONFIG{ 'output' } ) )
    {
        print "The '--output' argument is mandatory\n";
        exit 1;
@@ -266,10 +265,10 @@ sub checkArguments
    #
    #  The output location should be a directory which exists.
    #
-    if ( !-d $CONFIG{'output'} )
+    if ( !-d $CONFIG{ 'output' } )
    {
        print
-"The output directory we've been given, $CONFIG{'output'}, doesnt exist\n";
+          "The output directory we've been given, $CONFIG{'output'}, doesnt exist\n";
        print "Aborting\n";
        exit 1;
    }
@@ -277,12 +276,12 @@ sub checkArguments
    #
    #  Make sure that any specified template file exists.
    #
-    if ( defined( $CONFIG{'template'} ) )
+    if ( defined( $CONFIG{ 'template' } ) )
    {
-        if ( !-e $CONFIG{'template'} )
+        if ( !-e $CONFIG{ 'template' } )
        {
            print
-"The specified template file, $CONFIG{'template'} does not exist.\n";
+              "The specified template file, $CONFIG{'template'} does not exist.\n";
            exit 1;
        }
    }
@@ -306,21 +305,18 @@ sub importPartitionsFromEnvironment
 {
    @PARTITIONS = ();

-    for ( my $i = 1 ; $i <= $ENV{'NUMPARTITIONS'} ; $i++ )
+    return unless exists $ENV{ 'NUMPARTITIONS' };
+    for ( my $i = 1 ; $i <= $ENV{ 'NUMPARTITIONS' } ; $i++ )
    {
-        my @parts = split( /:/, $ENV{'PARTITION' . $i}, 7 );
-        push(
-              @PARTITIONS,
-              {
-               'name'       => $parts[0],
-               'size'       => $parts[1],
-               'type'       => $parts[2],
-               'mountpoint' => $parts[3],
-               'options'    => $parts[4],
-               'imagetype'  => $parts[5],
-               'image'      => $parts[6]
-              }
-        );
+        my @parts = split( /:/, $ENV{ 'PARTITION' . $i }, 7 );
+        push( @PARTITIONS,
+              {  'name'       => $parts[0],
+                 'size'       => $parts[1],
+                 'type'       => $parts[2],
+                 'mountpoint' => $parts[3],
+                 'options'    => $parts[4],
+                 'imagetype'  => $parts[5],
+                 'image'      => $parts[6] } );
    }
 }

@@ -338,30 +334,34 @@ sub importPartitionsFromEnvironment

 sub createXenConfig
 {
-
    #
    #  The output file we're going to process.
    #
-    my $file = $CONFIG{'output'} . '/' . $ENV{'hostname'} . $ENV{'extension'};
+    my $file =
+      $CONFIG{ 'output' } . '/' . $ENV{ 'hostname' } . $CONFIG{ 'extension' };

    #
    #  The template we're going to read from.
    #
    my $template = new Text::Template( TYPE   => 'FILE',
-                                       SOURCE => $CONFIG{'template'} );
+                                       SOURCE => $CONFIG{ 'template' } );


    #
    #  The device we're using.
    #
-    my $device = 'sda';
-    if ( defined( $ENV{'ide'} ) )
+    my $device = 'xvda';
+    if ( defined( $ENV{ 'ide' } ) )
    {
        $device = 'hda';
    }
-    elsif ( defined( $ENV{'disk_device'} ) )
+    elsif ( defined( $ENV{ 'scsi' } ) )
    {
-        $device = $ENV{'disk_device'};
+        $device = 'sda';
+    }
+    elsif ( defined( $ENV{ 'disk_device' } ) )
+    {
+        $device = $ENV{ 'disk_device' };

        # strip /dev/, if present.
        if ( $device =~ /^(.*)\/(.*)$/ )
@@ -369,65 +369,65 @@ sub createXenConfig
            $device = $2;
        }
    }
-    $ENV{'device'} = $device;
+    $ENV{ 'device' } = $device;


    #
    #  The memory size:  Convert Gb -> Mb.
    #
-    if ( $ENV{'memory'} =~ /^(\d+)Gb*$/i )
+    if ( $ENV{ 'memory' } =~ /^(\d+)Gb.*$/i )
    {
-        $ENV{'memory'} = $1 * 1024;
+        $ENV{ 'memory' } = $1 * 1024;
    }

    #
    #  Remove any trailing Mb.
    #
-    if ( $ENV{'memory'} =~ /^(\d+)Mb*$/i )
+    if ( $ENV{ 'memory' } =~ /^(\d+)Mb.*$/i )
    {
-        $ENV{'memory'} = $1;
+        $ENV{ 'memory' } = $1;
    }


    #
    # Images as presented to Xen - either loopback images, or LVM partitions.
    #
-    if ( $ENV{'lvm'} )
+    if ( $ENV{ 'lvm' } )
    {
-        $ENV{'image_prefix'} = "phy:$ENV{'lvm'}/$ENV{'hostname'}-";
-        $ENV{'image_suffix'} = '';
+        $ENV{ 'image_prefix' } = "phy:$ENV{'lvm'}/$ENV{'hostname'}-";
+        $ENV{ 'image_suffix' } = '';
        importPartitionsFromEnvironment();
    }
-    elsif ( $ENV{'evms'} )
+    elsif ( $ENV{ 'evms' } )
    {
-        $ENV{'image_prefix'} = "phy:/dev/evms/$ENV{'hostname'}-";
-        $ENV{'image_suffix'} = '';
+        $ENV{ 'image_prefix' } = "phy:/dev/evms/$ENV{'hostname'}-";
+        $ENV{ 'image_suffix' } = '';
        importPartitionsFromEnvironment();
    }
-    elsif ( $ENV{'image-dev'} )
+    elsif ( $ENV{ 'image-dev' } )
    {
-        $ENV{'image_vbd'} = "phy:$ENV{'image-dev'}";
+        $ENV{ 'image_vbd' } = "phy:$ENV{'image-dev'}";

-        if ( $ENV{'swap-dev'} )
+        if ( $ENV{ 'swap-dev' } )
        {
-            $ENV{'swap_vbd'} = "phy:$ENV{'swap-dev'}";
+            $ENV{ 'swap_vbd' } = "phy:$ENV{'swap-dev'}";
        }
        else
        {
-            $ENV{'swap_vbd'} = undef;
+            $ENV{ 'swap_vbd' } = undef;
        }
    }
    else
    {
-        $ENV{'image_prefix'} = "file:$ENV{'dir'}/domains/$ENV{'hostname'}/";
-        $ENV{'image_suffix'} = '.img';
+        $ENV{ 'image_prefix' } = "file:$ENV{'dir'}/domains/$ENV{'hostname'}/";
+        $ENV{ 'image_suffix' } = '.img';
        importPartitionsFromEnvironment();
    }

    #
    # The xen-tools version.
    #
-    $ENV{'xen_tools_version'} = $RELEASE;
+    $ENV{ 'xen_tools_version' } = $RELEASE;


    #
@@ -438,9 +438,9 @@ sub createXenConfig
    my %vars;
    foreach my $key ( sort keys %ENV )
    {
-        $vars{$key} = $ENV{$key};
+        $vars{ $key } = $ENV{ $key };
    }
-    $vars{'PARTITIONS'} = \@PARTITIONS;
+    $vars{ 'PARTITIONS' } = \@PARTITIONS;

    #
    #  Now output the data.
@@ -510,7 +510,7 @@ sub setupAdminUsers
    #  For each user make sure they exist, and setup the
    # login shell for them.
    #
-    foreach my $user ( split( /,/, $ENV{'admins'} ) )
+    foreach my $user ( split( /,/, $ENV{ 'admins' } ) )
    {

        # Strip leading and trailing whitespace.
@@ -525,22 +525,22 @@ sub setupAdminUsers
        {

            # Change shell.
-            $CONFIG{'verbose'} && print "Changing shell for $user: $shell\n";
+            $CONFIG{ 'verbose' } && print "Changing shell for $user: $shell\n";
            system( "chsh", "-s", $shell, $user );
        }
        else
        {

            # Add a new user.
-            $CONFIG{'verbose'} && print "Adding new user: $user\n";
+            $CONFIG{ 'verbose' } && print "Adding new user: $user\n";
            system( "useradd", "-s", $shell, $user );
        }

        #
        #  Add the entry to /etc/sudoers.
        #
-        open( SUDOERS, ">>", "/etc/sudoers" )
-          or warn "Failed to add user to sudoers file : $user - $!";
+        open( SUDOERS, ">>", "/etc/sudoers" ) or
+          warn "Failed to add user to sudoers file : $user - $!";
        print SUDOERS
          "$user ALL = NOPASSWD: /usr/sbin/xm, /usr/bin/xen-create-image\n";
        close(SUDOERS);
--- a/bin/xt-customize-image
+++ b/bin/xt-customize-image
@@ -60,18 +60,19 @@ xt-customize-image - Customize a freshly installed copy of GNU/Linux
 =cut


-=head1 AUTHOR
+=head1 AUTHORS

- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois

 =cut


 =head1 LICENSE

-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.

 This module is free software;
 you can redistribute it and/or modify it under
@@ -97,7 +98,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '4.3';



@@ -144,14 +145,13 @@ sub parseCommandLineArguments
    #
    #  Parse options.
    #
-    GetOptions(
-                "location=s", \$CONFIG{'location'},
-                "dist=s",     \$CONFIG{'dist'},
-                "verbose",    \$CONFIG{'verbose'},
+    GetOptions( "location=s", \$CONFIG{ 'location' },
+                "dist=s",     \$CONFIG{ 'dist' },
+                "verbose",    \$CONFIG{ 'verbose' },
                "help",       \$HELP,
                "manual",     \$MANUAL,
                "version",    \$VERSION
-    );
+              );

    pod2usage(1) if $HELP;
    pod2usage( -verbose => 2 ) if $MANUAL;
@@ -186,7 +186,7 @@ sub checkArguments
    #
    #  We require a location.
    #
-    if ( !defined( $CONFIG{'location'} ) )
+    if ( !defined( $CONFIG{ 'location' } ) )
    {
        print "The '--location' argument is mandatory\n";
        exit 1;
@@ -196,7 +196,7 @@ sub checkArguments
    #
    #  Test that the location we've been given exists
    #
-    if ( !-d $CONFIG{'location'} )
+    if ( !-d $CONFIG{ 'location' } )
    {
        print "The installation directory we've been given doesn't exist\n";
        print "We tried to use : $CONFIG{'location'}\n";
@@ -207,7 +207,7 @@ sub checkArguments
    #
    #  We require a distribution name.
    #
-    if ( !defined( $CONFIG{'dist'} ) )
+    if ( !defined( $CONFIG{ 'dist' } ) )
    {
        print "The '--dist' argument is mandatory\n";
        exit 1;
@@ -221,18 +221,18 @@ sub checkArguments
    #  If there are no scripts then we clearly cannot
    # customise it!
    #
-    my $dir = "/usr/lib/xen-tools/" . $CONFIG{'dist'} . ".d";
+    my $dir = "/usr/lib/xen-tools/" . $CONFIG{ 'dist' } . ".d";

    if ( !-d $dir )
    {
        print <<E_OR;

-  We're trying to configure an installation of $CONFIG{'dist'} in
+  We\'re trying to configure an installation of $CONFIG{'dist'} in
 $CONFIG{'location'} - but there is no hook directory for us to use.

-  This means we don't know how to configure this installation.
+  This means we don\'t know how to configure this installation.

-  We'd expect the hook directory to be : $dir
+  We\'d expect the hook directory to be : $dir

  Aborting.
 E_OR
@@ -263,12 +263,12 @@ sub runDistributionHooks
    #
    #  Hook directory.
    #
-    my $hooks = "/usr/lib/xen-tools/" . $CONFIG{'dist'} . ".d/";
+    my $hooks = "/usr/lib/xen-tools/" . $CONFIG{ 'dist' } . ".d/";

    #
    #  Installation prefix
    #
-    my $prefix = $CONFIG{'location'};
+    my $prefix = $CONFIG{ 'location' };

    #
    #  If we're running verbosely then setup the client environment
@@ -277,9 +277,9 @@ sub runDistributionHooks
    #  This is useful in case this script is called outwith the usual
    # xen-create-image framework.
    #
-    if ( $CONFIG{'verbose'} )
+    if ( $CONFIG{ 'verbose' } )
    {
-        $ENV{'verbose'} = 1;
+        $ENV{ 'verbose' } = 1;
    }

    #
@@ -317,18 +317,26 @@ sub runDistributionHooks
            #  Run the command.  This has different prolog and epilog
            # depending on whether we're running verbosely or not.
            #
-            if ( $CONFIG{'verbose'} )
+            if ( $CONFIG{ 'verbose' } )
            {
                print "Running hook $name ['$cmd']\n";
                print "--\n";
-                system($cmd );
+                my $rc = system($cmd);
+                if ($rc != 0) {
+                print "hook $name failed: $?\n";
+                exit 1;
+            }
                print "--\n";
                print "Done\n\n";
            }
            else
            {
                print "Running hook $name\n";
-                system($cmd );
+                my $rc = system($cmd);
+                if ($rc != 0) {
+                    print "hook $name failed: $?\n";
+                    exit 1;
+                }
                print "hook $name: done.\n";
            }
        }
--- a/bin/xt-guess-suite-and-mirror
+++ b/bin/xt-guess-suite-and-mirror
@@ -0,0 +1,192 @@
+#!/usr/bin/perl -w
+
+=head1 NAME
+
+xt-guess-suite-and-mirror - Tries to guess the most suitable suite and
+mirror for DomUs on Debian and Ubuntu Dom0s.
+
+=cut
+
+=head1 SYNOPSIS
+
+  --suite       Show suite
+  --mirror      Show mirror
+
+  Shows both if no parameter is given.
+
+  Help Options:
+
+   --help       Show the help information for this script.
+   --manual     Show the manual for this script.
+   --version    Show the version number and exit.
+
+=cut
+
+=head1 DESCRIPTION
+
+xt-guess-suite-and-mirror tries to find the mirror and suite the Xen
+Dom0 is currently using and returns them in a way suitable for
+xen-create-image(1) or the backticks feature in xen-tools.conf.
+
+=cut
+
+=head1 AUTHORS
+
+ Axel Beckert, http://noone.org/abe/
+ Stéphane Jourdois
+
+=cut
+
+=head1 LICENSE
+
+Copyright (C) 2010-2012 by The Xen-Tools Development Team. All rights
+reserved.
+
+This module is free software; you can redistribute it and/or modify it
+under the same terms as Perl itself. The LICENSE file contains the
+full text of the license.
+
+=cut
+
+###
+### Configuration
+###
+
+# Fallback to Debian or Ubuntu in case we can't find anything
+my $fallback = 'Debian';
+
+# Which mirrors to use if everything else fails (cdn.debian.net uses
+# GeoIP, see http://wiki.debian.org/DebianGeoMirror)
+my %fallback_mirror = ( Debian => 'http://cdn.debian.net/debian/',
+                        Ubuntu => 'http://archive.ubuntu.com/ubuntu/' );
+
+# Which suite to use if everything else fails. For Debian "stable"
+# should be the best choice independent of the time. Ubuntu does not
+# have aliases like stable or testing, so we take the nearest LTS
+# release which is 10.04 at the time of writing.
+my %fallback_suite = ( Debian => 'stable',
+                       Ubuntu => 'lucid' );
+
+# Where to look for the sources.list to parse
+my @sources_list_files = ( '/etc/apt/sources.list',
+                           glob('/etc/apt/sources.list.d/*.list'));
+
+use File::Slurp;
+use Getopt::Long;
+use Pod::Usage;
+
+use strict;
+
+
+#
+# Release number.
+#
+my $RELEASE = '4.3';
+
+# Init
+my $mirror = '';
+my $suite = '';
+my $found = 0;
+
+# Parsing command line options
+my $want_mirror  = 0;
+my $want_suite   = 0;
+my $want_version = 0;
+my $want_help    = 0;
+my $want_manual  = 0;
+
+my $result = GetOptions( 'mirror|m' => \$want_mirror,
+                         'suite|s'  => \$want_suite,
+                         'version'  => \$want_version,
+                         'manual'   => \$want_manual,
+                         'help'     => \$want_help );
+
+if ($want_help) {
+    pod2usage(0);
+}
+
+if ($want_manual) {
+    pod2usage( -verbose => 2 );
+}
+
+all_sources_list_files: foreach my $sources_list_file (@sources_list_files) {
+    if (-r $sources_list_file) {
+        # sources.list file exists, so it's something debianoid.
+
+        # read sources.list and split it into lines
+        my @sources_list = read_file($sources_list_file);
+
+        # Find the first line which is a Debian or Ubuntu mirror but not
+        # an updates, backports, volatile or security mirror.
+        foreach my $sources_list_entry (@sources_list) {
+            # Normalize line
+            chomp($sources_list_entry);
+            $sources_list_entry =~ s/^\s*(.*?)\s*$/$1/;
+
+            # Skip definite non-entries
+            next if $sources_list_entry =~ /^\s*($|#)/;
+
+            # Split up into fields
+            my @source_components = split(/\s+/, $sources_list_entry);
+
+            # Minimum number of components is 4
+            next if $#source_components < 3;
+
+            # Don't use deb-src entries.
+            next if $source_components[0] eq 'deb-src';
+
+            # Skip updates, backports, volatile or security mirror.
+            next if $source_components[2] !~ /^[a-z]+$/;
+
+            if ($source_components[1] =~ m(/debian/?$|/ubuntu/?$)) {
+                # Seems a typical mirror. Let's use that one
+
+                $mirror = $source_components[1];
+                $suite = $source_components[2];
+
+                $found = 1;
+                last all_sources_list_files;
+            }
+        }
+    }
+}
+die "Couldn't find a useful entry in the sources.list files of the Dom0. Tried:\n  ".
+    join("\n  ", @sources_list_files)."\n" unless $found;
+
+my $lsb_release = `which lsb_release`;
+chomp($lsb_release);
+
+if (!$found and $lsb_release and -x $lsb_release) {
+    my $vendor = `$lsb_release -s -i`;
+
+    if ($vendor eq 'Debian' or $vendor eq 'Ubuntu') {
+        $suite = `$lsb_release -s -c`;
+        chomp($suite);
+
+        unless ($suite) {
+            $suite = $fallback_suite{$vendor};
+            warn "Dom0 seems to be $vendor, but couldn't determine suite. Falling back to $suite.\n";
+        }
+
+        $mirror = $fallback_mirror{$vendor};
+
+        $found = 1;
+    }
+}
+
+if ($found) {
+    unless ($want_help || $want_version || $want_suite || $want_mirror) {
+        print "$mirror $suite\n";
+    } else {
+        if ($want_mirror) {
+            print "$mirror";
+        }
+        if ($want_suite) {
+            print "$suite";
+        }
+        print "\n";
+    }
+} else {
+    $suite  = $fallback_suite{$fallback};
+    $mirror = $fallback_mirror{$fallback};
+}
--- a/bin/xt-install-image
+++ b/bin/xt-install-image
@@ -27,10 +27,14 @@ xt-install-image - Install a fresh copy of GNU/Linux into a directory
   --config         Read the specified config file in addition to the global
                    configuration file.
   --mirror         The mirror to use when installing with 'debootstrap'.
+   --apt_proxy      The proxy to use when installing with 'debootstrap'.

  Installation Options:
-   --install-method Specify the installation method to use.
-   --install-source Specify the installation source to use.
+   --install-method  Specify the installation method to use.
+   --install-source  Specify the installation source to use.
+   --debootstrap-cmd Specify which debootstrap command to
+                     use. Defaults to debootstrap if both, debootstrap
+                     and cdebootstrap are installed.

  All other options from xen-create-image will be passed as environmental
 variables.
@@ -77,18 +81,19 @@ Untar a .tar file into the new installation location.  This tarfile is assumed t
 =cut


-=head1 AUTHOR
+=head1 AUTHORS

- Steve
- --
- http://www.steve.org.uk/
+ Steve Kemp, http://www.steve.org.uk/
+ Axel Beckert, http://noone.org/abe/
+ Dmitry Nedospasov, http://nedos.net/
+ Stéphane Jourdois

 =cut

-
 =head1 LICENSE

-Copyright (c) 2005-2007 by Steve Kemp.  All rights reserved.
+Copyright (c) 2005-2009 by Steve Kemp, (c) 2010 by The Xen-Tools
+Development Team. All rights reserved.

 This module is free software;
 you can redistribute it and/or modify it under
@@ -113,7 +118,7 @@ my %CONFIG;
 #
 # Release number.
 #
-my $RELEASE = '4.1';
+my $RELEASE = '4.3';


 #
@@ -128,33 +133,23 @@ my $RELEASE = '4.1';
 #
 #
 my %dispatch = (
-                 "copy" => {
-                            sub           => \&do_copy,
-                            needBinary    => "/bin/cp",
-                            needDirectory => 1,
-                 },
-                 "debootstrap" => {
-                                   sub        => \&do_debootstrap,
-                                   needBinary => "/usr/sbin/debootstrap",
-                 },
-                 "image-server" => {
-                                    sub     => \&do_image_server,
-                                    needURL => 1,
-                 },
-                 "rinse" => {
-                             sub        => \&do_rinse,
-                             needBinary => "/usr/bin/rinse",
-                 },
-                 "rpmstrap" => {
-                                sub        => \&do_rpmstrap,
-                                needBinary => "/usr/bin/rpmstrap",
-                 },
-                 "tar" => {
-                           sub        => \&do_tar,
-                           needBinary => "/bin/tar",
-                           needFile   => 1,
-                 }
-);
+                 "copy" => { sub           => \&do_copy,
+                             needBinary    => "/bin/cp",
+                             needDirectory => 1,
+                           },
+                 "debootstrap" => { sub        => \&do_debootstrap,
+                                    needBinary => "/usr/sbin/debootstrap",
+                                  },
+                 "rinse" => { sub        => \&do_rinse,
+                              needBinary => "/usr/sbin/rinse",
+                            },
+                 "rpmstrap" => { sub        => \&do_rpmstrap,
+                                 needBinary => "/usr/bin/rpmstrap",
+                               },
+                 "tar" => { sub        => \&do_tar,
+                            needBinary => "/bin/tar",
+                            needFile   => 1,
+                          } );



@@ -173,9 +168,9 @@ parseCommandLineArguments();
 #
 #  If we received a configuration file then read it.
 #
-if ( $CONFIG{'config'} )
+if ( $CONFIG{ 'config' } )
 {
-    my $path = $CONFIG{'config'};
+    my $path = $CONFIG{ 'config' };

    # If not fully-qualified then read from /etc/xen-tools.
    if ( $path !~ /^[\/]/ )
@@ -197,14 +192,14 @@ checkArguments();
 #
 #  Now lookup our installation type and dispatch control to it.
 #
-if ( defined( $CONFIG{'install-method'} )
-     && length( $CONFIG{'install-method'} ) )
+if ( defined( $CONFIG{ 'install-method' } ) &&
+     length( $CONFIG{ 'install-method' } ) )
 {

    #
    #  Get the entry from the dispatch table.
    #
-    my $installer = $dispatch{lc( $CONFIG{'install-method'} )};
+    my $installer = $dispatch{ lc( $CONFIG{ 'install-method' } ) };

    if ( defined($installer) )
    {
@@ -214,75 +209,57 @@ if ( defined( $CONFIG{'install-method'} )
        #

        # Do we need to test for a binary.
-        if (    ( $installer->{'needBinary'} )
-             && ( !-x $installer->{'needBinary'} ) )
+        if ( ( $installer->{ 'needBinary' } ) &&
+             ( !-x $installer->{ 'needBinary' } ) )
        {
            print
-"The following required binary for the installation was not found\n";
-            print "\t" . $installer->{'needBinary'} . "\n";
+              "The following required binary for the installation was not found\n";
+            print "\t" . $installer->{ 'needBinary' } . "\n";
            exit 1;
        }

        # Do we need a directory specified as the installation source?
-        if (   ( $installer->{'needDirectory'} )
-            && ( !$CONFIG{'install-source'} || !-d $CONFIG{'install-source'} ) )
+        if ( ( $installer->{ 'needDirectory' } ) &&
+             ( !$CONFIG{ 'install-source' } || !-d $CONFIG{ 'install-source' } )
+           )
        {
            print "Please specify the source directory with --install-source\n";
-            if ( $CONFIG{'install-source'} )
+            if ( $CONFIG{ 'install-source' } )
            {
                print
-"The specified directory $CONFIG{'install-source'} does not exist.\n";
+                  "The specified directory $CONFIG{'install-source'} does not exist.\n";
            }
            exit 1;
        }

        # Do we need a file specified as the installation source?
-        if (   ( $installer->{'needFile'} )
-            && ( !$CONFIG{'install-source'} || !-e $CONFIG{'install-source'} ) )
+        if ( ( $installer->{ 'needFile' } ) &&
+             ( !$CONFIG{ 'install-source' } || !-e $CONFIG{ 'install-source' } )
+           )
        {
            print "Please specify the source file with --install-source\n";

-            if ( $CONFIG{'install-source'} )
+            if ( $CONFIG{ 'install-source' } )
            {
                print
-"The specified file $CONFIG{'install-source'} does not exist.\n";
+                  "The specified file $CONFIG{'install-source'} does not exist.\n";
            }
            exit 1;
        }

-        # Do we need an URL specified as the installation source?
-        if (
-             ( $installer->{'needURL'} )
-             && ( !$CONFIG{'install-source'}
-                  || ( $CONFIG{'install-source'} !~ /^http/i ) )
-          )
-        {
-            print "Please specify the image server URL with --install-source\n";
-            exit 1;
-        }
-
-
-
        #
        #  Now we can call the appropriate handler.
        #
-        $installer->{'sub'}->();
+        $installer->{ 'sub' }->();

        #
        #  Did the operation succeed?
        #
        #  Test that we have some "standard" files present.
        #
-        foreach my $file (qw( /bin/ls /bin/cp ))
-        {
-            if ( !-x $CONFIG{'location'} . $file )
-            {
-                print "The installation of the new system has failed.\n";
-                print "\n";
-                print "The system is missing the common file: $file\n";
-                exit 1;
-            }
-        }
+
+        checkForCommonFilesInChroot($CONFIG{ 'location' },
+                                    "installed system");

        #
        #  All done.
@@ -375,7 +352,7 @@ sub readConfigurationFile
            }

            # Store value.
-            $CONFIG{$key} = $val;
+            $CONFIG{ $key } = $val;
        }
    }

@@ -404,22 +381,25 @@ sub parseCommandLineArguments
    GetOptions(

        # Mandatory
-        "location=s", \$CONFIG{'location'},
-        "dist=s",     \$CONFIG{'dist'},
-        "hostname=s", \$CONFIG{'hostname'},
+        "location=s", \$CONFIG{ 'location' },
+        "dist=s",     \$CONFIG{ 'dist' },
+        "hostname=s", \$CONFIG{ 'hostname' },

        # Installation method
-        "install-method=s", \$CONFIG{'install-method'},
-        "install-source=s", \$CONFIG{'install-source'},
+        "install-method=s", \$CONFIG{ 'install-method' },
+        "install-source=s", \$CONFIG{ 'install-source' },
+        "debootstrap-cmd=s", \$CONFIG{ 'debootstrap-cmd' },

        # Misc
-        "arch=s",   \$CONFIG{'arch'},
-        "cache=s",  \$CONFIG{'cache'},
-        "config=s", \$CONFIG{'config'},
-        "mirror=s", \$CONFIG{'mirror'},
+        "arch=s",   \$CONFIG{ 'arch' },
+        "cache=s",  \$CONFIG{ 'cache' },
+        "cachedir=s", \$CONFIG{ 'cachedir' },
+        "config=s", \$CONFIG{ 'config' },
+        "mirror=s", \$CONFIG{ 'mirror' },
+        "apt_proxy=s", \$CONFIG{ 'apt_proxy' },

        # Help.
-        "verbose", \$CONFIG{'verbose'},
+        "verbose", \$CONFIG{ 'verbose' },
        "help",    \$HELP,
        "manual",  \$MANUAL,
        "version", \$VERSION
@@ -458,7 +438,7 @@ sub checkArguments
    #
    #  We require a location.
    #
-    if ( !defined( $CONFIG{'location'} ) )
+    if ( !defined( $CONFIG{ 'location' } ) )
    {
        print "The '--location' argument is mandatory\n";
        exit 1;
@@ -468,7 +448,7 @@ sub checkArguments
    #
    #  Test that the location we've been given exists
    #
-    if ( !-d $CONFIG{'location'} )
+    if ( !-d $CONFIG{ 'location' } )
    {
        print "The installation directory we've been given doesn't exist\n";
        print "We tried to use : $CONFIG{'location'}\n";
@@ -479,7 +459,7 @@ sub checkArguments
    #
    #  We require a distribution name.
    #
-    if ( !defined( $CONFIG{'dist'} ) )
+    if ( !defined( $CONFIG{ 'dist' } ) )
    {
        print "The '--dist' argument is mandatory\n";
        exit 1;
@@ -493,18 +473,18 @@ sub checkArguments
    #  If there are no scripts then we clearly cannot
    # customise it!
    #
-    my $dir = "/usr/lib/xen-tools/" . $CONFIG{'dist'} . ".d";
+    my $dir = "/usr/lib/xen-tools/" . $CONFIG{ 'dist' } . ".d";

    if ( !-d $dir )
    {
        print <<E_OR;

-  We're trying to configure an installation of $CONFIG{'dist'} in
+  We are trying to configure an installation of $CONFIG{'dist'} in
 $CONFIG{'location'} - but there is no hook directory for us to use.

-  This means we won't know how to configure this installation.
+  This means we would not know how to configure this installation.

-  We'd expect the hook directory to be : $dir
+  We would expect the hook directory to be $dir.

  Aborting.
 E_OR
@@ -516,12 +496,12 @@ E_OR
    #  Test that we received a valid installation type.
    #
    my $valid = 0;
-    if ( defined( $CONFIG{'install-method'} ) )
+    if ( defined( $CONFIG{ 'install-method' } ) )
    {
        foreach my $recognised ( keys %dispatch )
        {
            $valid = 1
-              if ( lc( $CONFIG{'install-method'} ) eq lc($recognised) );
+              if ( lc( $CONFIG{ 'install-method' } ) eq lc($recognised) );
        }
    }
    else
@@ -549,6 +529,30 @@ EOF



+=begin doc
+
+  Check if there are some common files in some chroot
+
+=end doc
+
+=cut
+
+sub checkForCommonFilesInChroot {
+    my ($chroot, $what) = @_;
+    foreach my $file (qw( /bin/ls /bin/cp ))
+    {
+        if ( !-x $chroot.$file )
+        {
+            print STDERR <<EOT;
+WARNING ($0): The $what at $chroot doesn\'t seem to be a full system.
+WARNING ($0): The $what is missing the common file: $file.
+EOT
+        }
+    }
+}
+
+
+
 =begin doc

  A utility method to run a system command.  We will capture the return
@@ -567,7 +571,7 @@ sub runCommand
    #
    #  Command start.
    #
-    $CONFIG{'verbose'} && print "Executing : $cmd\n";
+    $CONFIG{ 'verbose' } && print "Executing : $cmd\n";

    #
    #  Copy stderr to stdout, so we can see it, and make sure we log it.
@@ -583,13 +587,13 @@ sub runCommand
    {
        print "Running command '$cmd' failed.\n";
        print "Aborting\n";
-        exit;
+        exit 127;
    }

    #
    #  Command finished.
    #
-    $CONFIG{'verbose'} && print "Finished : $cmd\n";
+    $CONFIG{ 'verbose' } && print "Finished : $cmd\n";

    return ($output);
 }
@@ -656,10 +660,16 @@ sub copyDebFiles
 sub do_copy
 {

+    #
+    #  Check if the copy source has at least some "standard" files present.
+    #
+    checkForCommonFilesInChroot($CONFIG{ 'install-source' },
+                                "installation source");
+
    #
    #  Find the copy command to run from the configuration file.
    #
-    my $cmd = $CONFIG{'copy-cmd'};
+    my $cmd = $CONFIG{ 'copy-cmd' };
    if ( !defined($cmd) )
    {
        print "Falling back to default copy command\n";
@@ -695,11 +705,19 @@ sub do_debootstrap
    #  The command is a little configurable - mostly to allow you
    # to use cdebootstrap.
    #
-    my $cmd = $CONFIG{'debootstrap-cmd'};
-    if ( !defined($cmd) )
+    my $cmd = $CONFIG{ 'debootstrap-cmd' };
+    my $cachedir = $CONFIG{ 'cachedir' };
+    if ( !$cmd )
    {
-        print "Falling back to default debootstrap command\n";
-        $cmd = '/usr/sbin/debootstrap';
+        if (-x '/usr/sbin/debootstrap') {
+            $cmd = '/usr/sbin/debootstrap';
+        } elsif (-x '/usr/sbin/cdebootstrap') {
+            $cmd = '/usr/sbin/cdebootstrap';
+        } else {
+            print STDERR "Found neither debootstrap nor cdebootstrap and no --debootstrap-cmd given\n";
+            exit 1;
+        }
+        print "Using $cmd as debootstrap command\n";
    }


@@ -707,11 +725,19 @@ sub do_debootstrap
    #  Cache from host -> new installation if we've got caching
    # enabled.
    #
-    if ( $CONFIG{'cache'} eq "yes" )
+    if ( $CONFIG{ 'cache' } eq "yes" )
    {
        print "\nCopying files from host to image.\n";
+        unless( -d $cachedir ) {
+            my $xtcache = '/var/cache/xen-tools/archives/';
+            print("$cachedir not found, defaulting to $xtcache\n");
+            unless ( -d $xtcache ) {
+                system "mkdir -p $xtcache";
+            }
+            $cachedir = $xtcache;
+        }
        runCommand("mkdir -p $CONFIG{'location'}/var/cache/apt/archives");
-        copyDebFiles( "/var/cache/apt/archives",
+        copyDebFiles( "$cachedir",
                      "$CONFIG{'location'}/var/cache/apt/archives" );
        print("Done\n");
    }
@@ -720,7 +746,7 @@ sub do_debootstrap
    #  Propogate --verbose appropriately.
    #
    my $EXTRA = '';
-    if ( $CONFIG{'verbose'} )
+    if ( $CONFIG{ 'verbose' } )
    {
        $EXTRA = ' --verbose';
    }
@@ -728,11 +754,19 @@ sub do_debootstrap
    #
    #  Propogate the --arch argument
    #
-    if ( $CONFIG{'arch'} )
+    if ( $CONFIG{ 'arch' } )
    {
        $EXTRA .= " --arch $CONFIG{'arch'}";
    }

+    #
+    #  Setup http_proxy so that debootstrap pulls files through the apt-proxy
+    #
+    if ( $CONFIG{ 'apt_proxy' } )
+    {
+        print("Using apt_proxy: $CONFIG{'apt_proxy'}\n");
+        $ENV{'http_proxy'} = $CONFIG{'apt_proxy'};
+    }

    #
    #  This is the command we'll run
@@ -750,11 +784,11 @@ sub do_debootstrap
    #  Cache from the new installation -> the host if we've got caching
    # enabled.
    #
-    if ( $CONFIG{'cache'} eq "yes" )
+    if ( $CONFIG{ 'cache' } eq "yes" )
    {
        print "\nCopying files from new installation to host.\n";
        copyDebFiles( "$CONFIG{'location'}/var/cache/apt/archives",
-                      "/var/cache/apt/archives" );
+                      "$cachedir" );
        print("Done\n");
    }

@@ -765,165 +799,7 @@ sub do_debootstrap

 =begin doc

-  Install a system using the image-server.
-
-  Note:  NON-Advertised ....
-
-=end doc
-
-=cut
-
-sub do_image_server
-{
-
-    #
-    #  Load the modules we require.
-    #
-    my $test = 'use LWP::UserAgent; use CGI;';
-
-    #
-    #  Test loading the module, if it fails then
-    # we must abort.  We don't want to insist the module
-    # is installed since that adds to the dependencies
-    # which users will not require for the typical installation
-    # method(s).
-    #
-    eval($test);
-    if ($@)
-    {
-        die "The module LDP::UserAgent wasn't found...\n";
-    }
-
-
-    #
-    #  The number of attempts to request the image from our
-    # image server, and the time to sleep between them.
-    #
-    my $attempts = 30;
-    my $sleep    = 30;
-
-
-    #
-    #  Build up the request we're going to send.
-    #
-    my $request = $CONFIG{'install-source'} . "/create.cgi?submit=1";
-
-    #
-    #  Some parameters are hard-wired.
-    #
-    $request .= "&arch=amd64";
-    $request .= "&root_device=/dev/sda";
-    $request .= "&ip1=" . $ENV{'ip1'};
-    $request .= "&dist=" . CGI::escapeHTML( $CONFIG{'dist'} );
-    $request .= "&hostname=" . CGI::escapeHTML( $CONFIG{'hostname'} );
-
-    #
-    #  We only care about some keys
-    #
-    foreach my $k (qw/ dhcp broadcast gateway netmask  /)
-    {
-
-        # Skip values which aren't defined.
-        next unless defined $ENV{$k};
-
-        # CGI encode.
-        my $val = CGI::escapeHTML( $ENV{$k} );
-
-        # Add on to the request
-        $request .= "&$k=$val";
-    }
-
-
-    #
-    #  Create a new user agent.
-    #
-    my $ua = LWP::UserAgent->new;
-    $ua->timeout(10);
-    $ua->env_proxy;
-
-    #
-    #  Do the creation step
-    #
-    my $response = $ua->get($request);
-    if ( $response->is_success )
-    {
-        my $content = $response->content;
-
-        if ( $content =~ /fetch.cgi\?session=([^"]+)"/ )
-        {
-            my $session = $1;
-            my $new     = $CONFIG{'install-source'};
-            $new .= "/fetch.cgi?session=$session";
-            my $attempt = 1;
-
-            # Make sure we don't wait indefinitely.
-            while ( $attempt < $attempts )
-            {
-                $CONFIG{'verbose'} && print "Request: [$attempt/$attempts]\n";
-
-                #
-                #  Make a request to see if our tar file is ready yet.
-                #
-                $response = $ua->head($new);
-                if ( $response->is_success )
-                {
-
-                    #
-                    #  Get the headers
-                    #
-                    my $header = $response->headers();
-                    my $type   = $header->{'content-type'};
-
-                    #
-                    # OK our file is correct.
-                    #
-                    if ( $type =~ /tar/ )
-                    {
-
-                        #
-                        #  Download it to the installation root.
-                        #
-                        $ua->get( $new,
-                                      ":content_file" => $CONFIG{'location'}
-                                    . "/$session.tar" );
-
-                        #
-                        #  If it worked .. then untar, remove, and return.
-                        #
-                        system(
-"cd $CONFIG{'location'} && tar --numeric-owner -xf $session.tar && rm -f $CONFIG{'location'}/$session.tar"
-                        );
-                        return 1;
-                    }
-                }
-
-                sleep($sleep);
-                $attempt += 1;
-
-            }
-            print("ERROR:  Timeout waiting for image to be ready.");
-            return 0;
-        }
-        else
-        {
-            print(
-                 "ERROR:  Failed to find session.  Received this:\n$content\n");
-            return 0;
-        }
-    }
-    else
-    {
-        print( "ERROR: Submitting the image create request failed:\n"
-               . $response->status_line );
-        return 0;
-    }
-}
-
-
-
-=begin doc
-
-  Install a new distribution of GNU/Linux using the rpmstrap tool.
+  Install a new distribution of GNU/Linux using the rinse tool.

 =end doc

@@ -941,16 +817,33 @@ sub do_rinse
    #
    #  Propogate the --arch argument
    #
-    if ( $CONFIG{'arch'} )
+    if ( $CONFIG{ 'arch' } )
    {
        $command .= " --arch $CONFIG{'arch'}";
    }
+    else
+    {
+        my $uname_machine = `uname -m`;
+        chomp($uname_machine);

+        if ($uname_machine eq 'x86_64')
+        {
+            $command .= " --arch amd64";
+        }
+        elsif ($uname_machine =~ /^i[3-6]86$/) {
+            $command .= " --arch i386";
+        }
+        else
+        {
+            die "Local architecture ($uname_machine) not supported by rinse.\n".
+                "Please choose a supported installation architecture (i386 or amd64) explicitly."
+        }
+    }

    #
    #  Propogate the verbosity setting.
    #
-    if ( $CONFIG{'verbose'} )
+    if ( $CONFIG{ 'verbose' } )
    {
        $command .= " --verbose";
    }
@@ -975,7 +868,7 @@ sub do_rpmstrap
    #  Propogate the verbosity setting.
    #
    my $EXTRA = '';
-    if ( $CONFIG{'verbose'} )
+    if ( $CONFIG{ 'verbose' } )
    {
        $EXTRA .= " --verbose";
    }
@@ -983,7 +876,7 @@ sub do_rpmstrap
    #
    #  Propogate any arch setting we might have.
    #
-    if ( $CONFIG{'arch'} )
+    if ( $CONFIG{ 'arch' } )
    {
        $EXTRA .= " --arch $CONFIG{'arch'}";
    }
@@ -992,7 +885,7 @@ sub do_rpmstrap
    #  Setup mirror if present.
    #
    my $mirror = "";
-    $mirror = $CONFIG{'mirror'} if ( $CONFIG{'mirror'} );
+    $mirror = $CONFIG{ 'mirror' } if ( $CONFIG{ 'mirror' } );

    #
    #  The command we're going to run.
@@ -1017,7 +910,7 @@ sub do_tar
    #
    #  Find the tar command to run from the configuration file.
    #
-    my $cmd = $CONFIG{'tar-cmd'};
+    my $cmd = $CONFIG{ 'tar-cmd' };
    if ( !defined($cmd) )
    {
        print "Falling back to default tar command\n";
--- a/debian/NEWS
+++ b/debian/NEWS
@@ -0,0 +1,27 @@
+xen-tools (4.2~rc1-1) unstable; urgency=low
+
+  By default, xen-create-image now generates a random root password and
+  displays it as plain text at the end of the DomU generation process.
+  Use --genpass=0 and --passwd=1 to interactively set a root password
+  without the password being displayed.
+
+ -- Axel Beckert <abe@debian.org>  Tue, 03 Aug 2010 16:14:42 +0200
+
+xen-tools (4.2~beta1-1) unstable; urgency=low
+
+  If the DomU hangs with "Waiting for root file system" despite
+  /dev/xvd* is used as disk device, adding "xen-blkfront" to
+  /etc/initramfs-tools/modules and runing "update-initramfs -u"
+  afterwards may help.
+
+  If the Dom0 is a Debian or Ubuntu, the distribution and suite for
+  DomUs defaults to the distribution and suite the Dom0 is
+  running. Otherwise Debian DomUs get "stable" and Ubuntu "lucid" by
+  default.
+
+  Default Debian/Ubuntu mirror is now determined by looking into
+  /etc/apt/sources.list (if it exists) and taking the first entry with
+  path ending in /debian/ there.
+
+ -- Axel Beckert <abe@debian.org>  Sun, 30 May 2010 22:36:16 +0200
+
--- a/debian/README.source
+++ b/debian/README.source
@@ -0,0 +1,22 @@
+How to build xen-tools directly from the Git repository?
+========================================================
+
+Clone the git repository and change to the directory of your local
+working copy.
+
+$ git clone git://gitorious.org/xen-tools/xen-tools.git
+$ cd xen-tools
+
+If you just want to build the binary package, run
+
+$ make changelog
+$ dpkg-buildpackage -uc -us -b
+
+If you want to build source and binary packages, e.g. for an upload to
+Debian or Ubuntu:
+
+$ make orig-tar-gz
+$ dpkg-buildpackage
+
+
+ -- Axel Beckert <abe@debian.org>, Mon, 13 Sep 2010 14:30:05 +0200
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,207 @@
+xen-tools (4.3-1) unstable; urgency=low
+
+  * New upstream release
+    - Remove most Mercurial traces
+  * Fixes FTBFS due to testsuite failures (Closes: #676681)
+    - Disable tests of not yet used Xen::Tools. Fixes FTBFS in test suite
+      due to not satisifed Moose dependency in Xen::Tools::Log.
+    - Added build-dependencies on libmoose-perl, git, and
+      libtest-pod-coverage-perl for t/perl-syntax.t, t/gitignore.t, and
+      t/pod-coverage.t.
+    - Skip t/hook-inittab.t if /etc/inittab is not present on the build
+      host. Fixes FTBFS on Ubuntu.
+  * Switch to source format to "3.0 (quilt)"
+  * Don't remove stamp files manually, dh_clean does that already
+  * Remove generated file t/modules.t in clean target to be able to build
+    twice in a row.
+
+ -- Axel Beckert <abe@debian.org>  Tue, 26 Jun 2012 22:23:59 +0200
+
+xen-tools (4.3~rc1-1) unstable; urgency=low
+
+  * New upstream release candidate
+    - Correctly checks and documents valid values for
+      disk_device. (Closes: #621499)
+    - Supports creating Ubuntu 11.10 Oneiric DomUs (LP: #848654)
+    - Supports creating Ubuntu 12.04 Precise and 12.10 Quantal DomUs
+    - Supports creating CentOS 6 DomUs (Closes: #578399; Thanks Johan
+      Schurer)
+      + Recommend rinse >= 1.9.1-1
+    - Supports rinse 2.0
+    - Updated mirror list for discontinued releases of Debian and Ubuntu
+    - Workaround for missing unit parsing in xen-create-nfs (Closes:
+      #648814)
+    - Fix wildcard vs regexp in memory configuration parsing.
+    - Fix misbehaviour if --ip option is passed multiple times (Closes:
+      #652110; Thanks Brian Bennett and Alexander Mette!)
+    - Supports /etc/apt/sources.list.d/ (Closes: #650300)
+    - xt-guess-suite-and-mirror exits with non-zero if no proper mirror
+      could be extracted from /etc/apt/sources.list or
+      /etc/apt/sources.list.d/*.list (Thanks Phil Frost!)
+    - Only attempts to generate the ssh host keys if not already present
+      (Closes: #607236; Thanks Vagrant Cascadian!)
+    - New option --apt_proxy (Closes: #610457; Thanks Alex Tomlins!)
+    - Always write down root partition as first physical device, otherwise
+      pygrub fails (Closes: #609673)
+    - No more expect at least one option to mkfs.* calls. Fixes btrfs
+      creation.  (Closes: #609982)
+    - Fixes call to non-existent function logPrint (Closes: #673335)
+    - Also disable initctl in the chroot, not only start-stop-daemon
+      (LP: #997063; Thanks xstasi!)
+    - Massive code deduplication in hooks directory
+    - Use release blacklist for libc6-xen instead of whitelist in
+      hooks/debian.d/20-setup-apt
+    - Enforces umask 022 in 50-setup-hostname* (Hopefully closes: #619630)
+  * Add dependency on openssh-client for ssh-keygen (Closes: #649108)
+  * Use dh_auto_test for build time tests and add according
+    build-dependencies on devscripts and libfile-slurp-perl.
+  * No more suggest evms-cli -- it's no more available on any supported
+    Dom0 distribution. Thanks to Markus Waldeck for the hint.
+  * Add NEWS to debian/docs.
+  * Bump Standards-Version to 3.9.3 (no changes)
+  * Fix the following Lintian warnings:
+    - copyright-refers-to-symlink-license
+    - debian-rules-missing-recommended-target
+  * debian/copyright: Update copyright years
+  * Move xen-utils (for pygrub) from Suggests to Recommends as pygrub
+    becomes the necessary way to boot more and more often.
+  * Remove xen-shell from Recommends, nobody picked it up. (Closes:
+    #603708)
+
+ -- Axel Beckert <abe@debian.org>  Fri, 08 Jun 2012 14:18:38 +0200
+
+xen-tools (4.2.1-1) unstable; urgency=low
+
+  * New upstream release
+    - Fixes bashism in "editor" roles script. Thanks Raphaël Halimi for
+      the patch! (Closes: #605203)
+    - Fixes missing architecture check in Sarge amd64 special case. Thanks
+      to Guillaume Pernot! (Closes: #611397) Also changes default Sarge
+      amd64 mirror to http://archive.debian.org/debian-amd64/.
+    - Allows --ip=auto again (Closes: #611407)
+    - Unmounts /proc and /dev/pts of the freshly installed DomU just
+      before unmounting the disk image. (Closes: #588783)
+
+ -- Axel Beckert <abe@debian.org>  Thu, 17 Mar 2011 01:00:47 +0100
+
+xen-tools (4.2-1) unstable; urgency=low
+
+  * New upstream release
+    - Fixes several cases of broken or incomplete config files with
+      unexpected or seldom parameter combinations. (Closes: #484652)
+    - Updates examples in /etc/xen-tools.conf to better reflect current
+      state
+    - Allows usage of xvc* as serial console as used as default by older
+      Xen versions.
+    - Preliminary support for Ubuntu 11.04 (Natty) and Debian 7.0 (Wheezy)
+      (Closes: #597521)
+    - Switches default mirror for EoL'ed Ubuntu 8.10 (Intrepid) and Debian
+      4.0 (Etch) to the distributions' archives for old releases.
+  * Does no more try extract the upstream changelog during debian package
+    build. The commit which introduced this problem has been reverted.
+    Document more clearly in debian/README.source how to build the package
+    from a checked out copy of the git repository, especially that the
+    upstream changelog has to be generated first out of the VCS log.
+    (Closes: #595883)
+  * Update debian/copyright: Add Stéphane Jourdois to list of authors.
+
+ -- Axel Beckert <abe@debian.org>  Tue, 05 Oct 2010 19:01:49 +0200
+
+xen-tools (4.2~rc1-1) unstable; urgency=low
+
+  [Axel Beckert]
+  * New upstream release candidate
+    - Uses GeoIP for Debian mirrors: Default Debian mirror is now
+      cdn.debian.net, see http://wiki.debian.org/DebianGeoMirror for
+      details.
+    - Uses the same 15-disable-hwclock hook for Debian as for Ubuntu DomUs
+      (Closes: #588880)
+    - Mounts not only /proc but also /dev/pts automatically before running
+      any customisation hooks (Closes: #588783)
+    - Uses apt-config to parse Dom0's apt.conf. (Closes: #560011)
+    - Fixes wrong loop module parameter syntax in warning. Thanks to
+      Daniel Baumann for spotting this. (Closes: #516902)
+    - With --verbose, the output of commands called by xen-tools
+      (e.g. debootstrap) is not only logged, but also printed to
+      STDOUT. (Closes: #513126)
+    - Adds btrfs support.
+  * Bump Standards-Version to 3.9.1 (no changes)
+
+  [Stéphane Jourdois]
+  * [debian/control] Suggest btrfs-tools
+
+ -- Axel Beckert <abe@debian.org>  Sun, 15 Aug 2010 19:34:38 +0200
+
+xen-tools (4.2~beta1-1) unstable; urgency=low
+
+  * New maintainer and upstream authors
+  * Reintroduction into Debian Unstable (Closes: #566714)
+  * New upstream beta version
+    - Needs dependency on libfile-slurp-perl
+    - Supports for more recent versions of Fedora, Ubuntu and Debian
+      (Closes: #499477)
+    - Supports pygrub. (Added "Suggests: xen-utils" to debian/control)
+    - Uses hvc0 and xvda devices by default
+    - Sets umask to 0077 before creating disk images (Closes: #548909)
+    - Makes sure, MAKEDEV is found in either /dev/ or /sbin/
+      (Closes: #502798, #515228)
+    - Changed rinse path to /usr/sbin/. (Closes: #511211)
+    - Doesn't delete configuration file if it already exists when
+      xen-create-image is run. (Closes: #520177)
+    - Doesn't write the FQDN into /etc/hostname (Closes: #492583)
+    - Dereferences pointers before hashing them to generate a MAC
+      address. (Closes: #547265)
+    - Calls pwconv and grpconv inside chroot when installing Fedora
+      (Closes: #499476)
+    - Fixed typo in /usr/lib/xen-tools/*.d/75-fixup-securetty
+      (Closes: #503339)
+    - Makes better decisions about when to enable Debian security updates
+      in the created DomU (LP: #309750)
+    - Installs dhclient for CentOS and Fedora if DHCP networking is
+      requested (LP: #241446)
+    - Fixes some bashisms (Closes: #530226)
+      * [^y] → [!y] (Thanks to Mathieu Parent!)
+      * kill -HUP → kill -s HUP (found by checkbashism)
+      * ${parm/?/pat[/str]} → echo | sed
+      * echo -e → printf
+      * read → read dummy
+    - xt-install-image now exits with return value 127 instead of 0 to
+      indicate errors on running the command given in --install-method.
+      (Closes: #534290)
+    - The debootstrap command now also can be configured on the
+      commandline with --debootstrap-cmd in xen-create-image and
+      xt-install-image (Enhances fix for #436480 which added the
+      debootstrap-cmd config file option)
+    - Checks for debootstrap and cdebootstrap, uses debootstrap if both
+      are installed (Changed "Depends: debootstrap" to "Depends:
+      debootstrap | cdebootstrap" in debian/control)
+    - Added new files TODO and KNOWN_BUGS to debian/docs.
+  * Removal of /etc/bash_completion.d/xm from the package since
+    bash-completion ships a more elaborate version of that file. (Closes:
+    #566683, #550590, LP: #538917, #484098)
+  * Downgrade reiserfsprogs and xfsprogs to Suggests. (Closes: #561618,
+    LP: #80233)
+  * Added evms-cli to Suggests. It has been removed from Debian before
+    Lenny, but it is necessary for some optional functionality of
+    xen-tools. And since some Debian derived distributions (e.g. Ubuntu
+    LTS and grml) still support it, it's included for the sake of
+    completeness and correctness.
+  * Added cfengine2 to Suggests. It is helpful to have it installed when
+    using the cfengine2 role.
+  * Bump Standards-Version to 3.8.4 (no changes necessary)
+  * Bump Debhelper Compatibility to 7
+    - Replace "dh_clean -k" by "dh_prep"
+  * Add Vcs-* headers pointing to new upstream and packaging repository
+  * Fix some Lintian warnings:
+    - [debian/control]: debhelper-but-no-misc-depends
+    - [debian/copyright]: copyright-without-copyright-notice
+    - [debian/source/format]: missing-debian-source-format
+  * Added a README.source explaining how to build xen-tools directly from
+    the Git repository.
+  * Overhauled package description
+
+ -- Axel Beckert <abe@debian.org>  Sun, 30 May 2010 22:32:30 +0200
+
 xen-tools (4.1-1) unstable; urgency=low

  - New command line argument '--no-hosts' to avoid touching /etc/hosts
--- a/debian/clean
+++ b/debian/clean
@@ -0,0 +1 @@
+t/modules.t
--- a/debian/compat
+++ b/debian/compat
@@ -1 +1 @@
-4
+7
--- a/debian/control
+++ b/debian/control
@@ -1,18 +1,44 @@
 Source: xen-tools
 Section: utils
 Priority: extra
-Maintainer: Roland Stigge <stigge@antcom.de>
-Uploaders: Radu Spineanu <radu@debian.org>, Steve Kemp <skx@debian.org>
-Build-Depends: debhelper (>= 4.0.0), libtest-pod-perl, libtext-template-perl
-Standards-Version: 3.8.0
+Maintainer: Axel Beckert <abe@debian.org>
+Build-Depends: debhelper (>= 7.0.0), libtest-pod-perl, libtext-template-perl, libfile-slurp-perl, devscripts, libmoose-perl, libtest-pod-coverage-perl, git
+Standards-Version: 3.9.3
 Homepage: http://xen-tools.org/software/xen-tools
+Vcs-Browser: http://gitorious.org/xen-tools/xen-tools
+Vcs-Git: git://gitorious.org/xen-tools/xen-tools.git

 Package: xen-tools
 Architecture: all
-Depends: debootstrap, perl-modules, libtext-template-perl, libconfig-inifiles-perl
-Recommends: xen-hypervisor-amd64 | xen-hypervisor-i386 | xen-hypervisor-i386-pae, reiserfsprogs, xfsprogs, rinse, xen-shell, libexpect-perl
-Description: Tools to manage Debian XEN virtual servers
- This package contains tools to manage Debian based XEN virtual servers.
+Depends: debootstrap | cdebootstrap, perl-modules, libtext-template-perl, libconfig-inifiles-perl, libfile-slurp-perl, ${misc:Depends}, openssh-client
+Recommends: xen-hypervisor-amd64 | xen-hypervisor-i386 | xen-hypervisor-i386-pae, rinse (>= 1.9.1-1), libexpect-perl, xen-utils
+Suggests: reiserfsprogs, xfsprogs, cfengine2, btrfs-tools
+Description: Tools to manage Xen virtual servers
+ This package contains tools to manage Debian based Xen virtual servers.
 .
 Using the scripts you can easily create fully configured Xen guest
- domains (domU) which can be listed, updated, or copied easily.
+ domains (DomU) which can be listed, updated, or copied easily.
+ .
+ xen-tools currently can install:
+ .
+   * Debian 3.1 Sarge (i386 only)
+   * Debian 4.0 Etch
+   * Debian 5.0 Lenny
+   * Debian 6.0 Squeeze
+   * Debian 7.0 Wheezy
+   * Debian Sid (Unstable)
+   * Ubuntu 6.06 Dapper Drake (LTS)
+   * Ubuntu 6.10 Edgy Eft
+   * Ubuntu 7.04 Feisty Fawn
+   * Ubuntu 7.10 Gutsy Gibbon
+   * Ubuntu 8.04 Hardy Heron (LTS)
+   * Ubuntu 8.10 Intrepid Ibex
+   * Ubuntu 9.04 Jaunty Jackaplope
+   * Ubuntu 9.10 Karmic Koala
+   * Ubuntu 10.04 Lucid Lynx (LTS)
+   * Ubuntu 10.10 Maverick Meerkat
+   * Ubuntu 11.04 Natty Narwhal
+   * Ubuntu 11.10 Oneiric Ocelot
+   * Ubuntu 12.04 Precise Pangolin (LTS)
+   * CentOS 5
+   * CentOS 6
--- a/debian/copyright
+++ b/debian/copyright
@@ -3,7 +3,11 @@ Tue, 20 Dec 2005 02:21:05 +0200.

 It was downloaded from http://xen-tools.org/software/xen-tools/

-Copyright Holder: Steve Kemp <steve@steve.org.uk>
+Copyright 2005-2009: Steve Kemp <steve@steve.org.uk>
+Copyright 2010-2012: The Xen-Tools Development Team, currently consisting of:
+		     Axel Beckert <abe@deuxchevaux.org>,
+		     Dmitry Nedospasov <dmitry@nedos.net>, and
+		     Stéphane Jourdois <sjourdois@gmail.com>

 License:

@@ -19,6 +23,5 @@ Perl is distributed under licenses:
    b) the "Artistic License" which comes with Perl.

    On Debian GNU/Linux systems, the complete text of the GNU General
-    Public License can be found in /usr/share/common-licenses/GPL' and
+    Public License can be found in /usr/share/common-licenses/GPL-1' and
    the Artistic Licence in /usr/share/common-licenses/Artistic'.
-
--- a/debian/docs
+++ b/debian/docs
@@ -2,4 +2,6 @@ AUTHORS
 README
 SUPPORT
 BUGS
-TODO
+TODO
+KNOWN_BUGS
+NEWS
--- a/debian/examples/setup-kernel-initrd
+++ b/debian/examples/setup-kernel-initrd
@@ -53,7 +53,7 @@ cat <<EOF
  Press enter to continue, or Ctrl-c to abort.

 EOF
-read
+read __dummy



--- a/debian/preinst
+++ b/debian/preinst
@@ -23,5 +23,16 @@ if [ -d "/usr/lib/xen-tools/ubuntu.d" ]; then
 	rm -r /usr/lib/xen-tools/ubuntu.d
 fi

+#
+# 4.1 -> 4.2
+#
+
+if [ -L "/usr/lib/xen-tools/intrepid.d" ]; then
+        rm /usr/lib/xen-tools/intrepid.d
+fi
+if [ -L "/usr/lib/xen-tools/karmic.d" ]; then
+        rm /usr/lib/xen-tools/karmic.d
+fi
+
 #DEBHELPER#
 exit 0
--- a/debian/rules
+++ b/debian/rules
@@ -9,8 +9,9 @@ configure-stamp:
 	touch configure-stamp


-build: build-stamp
-
+build: build-arch build-indep
+build-arch: build-stamp
+build-indep: build-stamp
 build-stamp: configure-stamp 
 	dh_testdir
 	touch build-stamp
@@ -19,14 +20,14 @@ clean:
 	dh_testdir
 	dh_testroot
 	make clean
-	rm -f build-stamp configure-stamp
 	dh_clean 

 install: build
 	dh_testdir
 	dh_testroot
-	dh_clean -k 
+	dh_prep

+	dh_auto_test
 	make manpages
 	make install prefix=`pwd`/debian/xen-tools

--- a/debian/source/format
+++ b/debian/source/format
@@ -0,0 +1 @@
+3.0 (quilt)
--- a/etc/xen-tools.conf
+++ b/etc/xen-tools.conf
@@ -52,7 +52,7 @@
 # LVM volume group here instead
 #
 ##
-# lvm = skx-vg
+# lvm = vg0


 #
@@ -107,13 +107,13 @@ install-method = debootstrap
 # (This allows you to install from a .tar.bz file, rather than a plain
 # tar file, use cdebootstrap, etc.)
 #
-# install-method=copy:
+# install-method = copy:
 # copy-cmd = /bin/cp -a $src/* $dest
 #
-# install-method=debootstrap:
-# debootstrap-cmd=/usr/sbin/debootstrap
+# install-method = debootstrap:
+# debootstrap-cmd = /usr/sbin/debootstrap
 #
-# install-method=tar:
+# install-method = tar:
 # tar-cmd  = /bin/tar --numeric-owner -xvf $src
 #
 #
@@ -130,24 +130,13 @@ memory = 128Mb    # Memory size
 swap   = 128Mb    # Swap size
 # noswap = 1      # Don't use swap at all for the new system.
 fs     = ext3     # use the EXT3 filesystem for the disk image.
-dist   = etch     # Default distribution to install.
+dist   = `xt-guess-suite-and-mirror --suite` # Default distribution to install.
 image  = sparse   # Specify sparse vs. full disk images.

 #
-#  Currently supported and tested distributions include:
-#
-# via Debootstrap:
-#
-#  Debian:
-#   sid, sarge, etch, lenny.
-#
-#  Ubuntu:
-#   edgy, feisty, dapper.
-#
-# via Rinse:
-#   centos-4, centos-5.
-#   fedora-core-4, fedora-core-5, fedora-core-6, fedora-core-7
-#
+#  See the README for currently supported and tested distributions. You can
+# either find it in the root directory of the unpacked source or, on Debian
+# and Ubuntu based systems, in /usr/share/doc/xen-tools/README.gz
 #


@@ -160,14 +149,30 @@ image  = sparse   # Specify sparse vs. full disk images.
 # Uncomment and adjust these network settings if you wish to give your
 # new instances static IP addresses.
 #
-# gateway   = 192.168.1.1
-# netmask   = 255.255.255.0
-# broadcast = 192.168.1.255
+# gateway    = 192.168.1.1
+# netmask    = 255.255.255.0
+# broadcast  = 192.168.1.255
 #
 # Uncomment this if you wish the images to use DHCP
 #
 # dhcp = 1

+#
+# Uncomment and adjust this setting if you wish to give your new
+# instances a specific nameserver.
+#
+# By default, nameserver is not set, and Dom0's /etc/resolv.conf will
+# be copied to guest.
+#
+# nameserver = 192.168.1.1
+#
+
+#
+# Setup bridge name for host vif. Usefull if you use bridged networking
+# for guests.
+#
+# bridge = xendmz
+#

 ##
 # Misc options
@@ -181,10 +186,41 @@ image  = sparse   # Specify sparse vs. full disk images.
 #

 #
-# Uncomment the following line if you wish to interactively setup
-# a new root password for images.
+# The default cachedir is, /var/cache/apt/archives/, however if it
+# does not exist it will default to /var/cache/xen-tools/archives/
+# Uncomment the line below to set it to something else.
+#
+# cachedir = /var/cache/xen-tools/archives/
+#
+
+#
+# Uncomment the following line if you wish not to generate a new root
+# password for the new guest.
+#
+# genpass = 0
+#
+
+#
+# You can also change the password length by uncommenting and
+# changing the line below
+#
+# genpass_len = 8
+#
+
+#
+# You can yet change the hashing method to encrypt the generated
+# password by changing the line below.
+# Valid values : md5, sha256 and sha512.
+#
+# hash_method = sha256
+#
+
+#
+# Uncomment the following line if you wish to interactively setup a
+# new root password for images.
 #
 # passwd = 1
+#

 #
 # If you'd like all accounts on your host system which are not present
@@ -196,8 +232,8 @@ image  = sparse   # Specify sparse vs. full disk images.
 #
 # Default kernel and ramdisk to use for the virtual servers
 #
-kernel      = /boot/vmlinuz-`uname -r`
-initrd      = /boot/initrd.img-`uname -r`
+kernel = /boot/vmlinuz-`uname -r`
+initrd = /boot/initrd.img-`uname -r`

 #
 #  The architecture to use when using debootstrap, rinse, or rpmstrap.
@@ -205,13 +241,13 @@ initrd      = /boot/initrd.img-`uname -r`
 #  This is most useful on 64 bit host machines, for other systems it
 # doesn't need to be used.
 #
-# arch=[i386|amd64]
+# arch = [i386|amd64]
 #

 #
 # The default mirror for debootstrap to install Debian-derived distributions
 #
-mirror = http://ftp.us.debian.org/debian/
+mirror = `xt-guess-suite-and-mirror --mirror`

 #
 # A mirror suitable for use when installing the Dapper release of Ubuntu.
@@ -221,24 +257,44 @@ mirror = http://ftp.us.debian.org/debian/
 #
 #  If you like you could use per-distribution mirrors, which will
 # be more useful if you're working in an environment where you want
-# to regularly use multiple distributions:
+# to regularly use multiple distributions. The following are the
+# default values used (for Debian the GeoIP feature is used, see
+# http://wiki.debian.org/DebianGeoMirror):
 #
-# mirror_sid=http://ftp.us.debian.org/debian
-# mirror_sarge=http://ftp.us.debian.org/debian
-# mirror_etch=http://ftp.us.debian.org/debian
-# mirror_dapper=http://archive.ubuntu.com/ubuntu
-# mirror_edgy=http://archive.ubuntu.com/ubuntu
-# mirror_feisty=http://archive.ubuntu.com/ubuntu
-# mirror_gutsy=http://archive.ubuntu.com/ubuntu
+# mirror_sarge = http://archive.debian.org/debian
+# mirror_etch = http://archive.debian.org/debian
+# mirror_lenny = http://archive.debian.org/debian
+# mirror_squeeze = http://cdn.debian.net/debian
+# mirror_wheezy = http://cdn.debian.net/debian
+# mirror_sid = http://cdn.debian.net/debian
+# mirror_dapper = http://old-releases.ubuntu.com/ubuntu
+# mirror_edgy = http://old-releases.ubuntu.com/ubuntu
+# mirror_feisty = http://old-releases.ubuntu.com/ubuntu
+# mirror_gutsy = http://old-releases.ubuntu.com/ubuntu
+# mirror_hardy = http://archive.ubuntu.com/ubuntu
+# mirror_intrepid = http://old-releases.ubuntu.com/ubuntu
+# mirror_jaunty = http://old-releases.ubuntu.com/ubuntu
+# mirror_karmic = http://old-releases.ubuntu.com/ubuntu
+# mirror_lucid = http://archive.ubuntu.com/ubuntu
+# mirror_maverick = http://old-releases.ubuntu.com/ubuntu
+# mirror_natty = http://archive.ubuntu.com/ubuntu
+# mirror_oneiric = http://archive.ubuntu.com/ubuntu
+# mirror_precise = http://archive.ubuntu.com/ubuntu
+# mirror_quantal = http://archive.ubuntu.com/ubuntu

+# If this is defined it will be used by debootstrap, and configured as the
+# proxy for the guest
+#
+# apt_proxy =

 #
 #  Filesystem options for the different filesystems we support.
 #
-ext3_options   = noatime,nodiratime,errors=remount-ro
-ext2_options   = noatime,nodiratime,errors=remount-ro
-xfs_options    = defaults
-reiser_options = defaults
+ext3_options     = noatime,nodiratime,errors=remount-ro
+ext2_options     = noatime,nodiratime,errors=remount-ro
+xfs_options      = defaults
+reiserfs_options = defaults
+btrfs_options    = defaults

 #
 #  Uncomment if you wish newly created images to boot once they've been
@@ -250,7 +306,7 @@ reiser_options = defaults
 #
 #  If you're using the lenny or later version of the Xen guest kernel you will
 # need to make sure that you use 'hvc0' for the guest serial device,
-# and 'xvdX' instead of 'sdX' for serial devices.
+# and 'xvdX' instead of 'sdX' for disk devices.
 #
 #  You may specify the things to use here:
 #
@@ -274,3 +330,20 @@ reiser_options = defaults
 # output    = /etc/xen
 # extension = .cfg
 #
+
+#
+#  Here you can control weather your dom0's /etc/hosts file should be
+# appended with the new guest, and also if your dom0's /etc/hosts file
+# should be copied to the new guest.
+#
+#  Change the following options to 1 to set them
+# nohosts - don't touch the dom0's /etc/hosts file
+# copyhosts - copy the dom0's /etc/hosts to the guest
+#
+#  by default new guests ARE added to the dom0's /etc/hosts file
+# nohosts = 0 # default
+#
+#  by default the dom0's /etc/hosts IS NOT copied
+# copyhosts = 0 # default
+#
+
--- a/etc/xm.tmpl
+++ b/etc/xm.tmpl
@@ -19,9 +19,22 @@
 {
  if ( $pygrub )
  {
-    $OUT .= "bootloader = '/usr/bin/pygrub'\n";
+    my $pygrub_bin = '';
+    foreach my $pygrub_path (reverse glob('/usr/lib/xen-*/bin/pygrub
+                                           /usr/lib/xen-default/bin/pygrub
+                                           /usr/*bin/pygrub')) {
+      if (-x $pygrub_path) {
+        $pygrub_bin = $pygrub_path;
+        last;
+      }
+    }
+
+    die "pygrub not found" unless $pygrub_bin;
+
+    $OUT .= "bootloader = '$pygrub_bin'\n";
  }
 }
+vcpus       = '{$vcpus}'
 memory      = '{$memory}'

 #
@@ -40,7 +53,17 @@ memory      = '{$memory}'
    $OUT .= "disk        = [\n";
    for ( my $i = $#PARTITIONS; $i >= 0 ; $i-- )
    {
-      $OUT .= "                  '$PARTITIONS[$i]{'imagetype'}$PARTITIONS[$i]{'image'},$device" . ( $i + 1 ) .",w',\n";
+       if ( $PARTITIONS[$i]{'mountpoint'} eq '/' )
+       {
+           $OUT .= "                  '$PARTITIONS[$i]{'imagetype'}$PARTITIONS[$i]{'image'},$device" . ( $i + 1 ) .",w',\n";
+       }
+    }
+    for ( my $i = $#PARTITIONS; $i >= 0 ; $i-- )
+    {
+       if ( $PARTITIONS[$i]{'mountpoint'} ne '/' )
+       {
+           $OUT .= "                  '$PARTITIONS[$i]{'imagetype'}$PARTITIONS[$i]{'image'},$device" . ( $i + 1 ) .",w',\n";
+       }
    }
    $OUT .= "              ]\n";
  }
@@ -50,32 +73,20 @@ memory      = '{$memory}'
 #  Physical volumes
 #
 {
-    if ( ( $swap_vbd ) && ( $image_vbd ) )
-    {
-    $OUT .= "root  = '/dev/$device" . "2 ro'\n";
-
-    $OUT .= "disk  = [ ";
-
    if ( $image_vbd )
    {
-         $OUT .= "'$image_vbd," . $device . "2,w'";
+        $OUT .= "root        = '/dev/$device" . "2 ro'\n";
+        $OUT .= "disk        = [\n";
+        $OUT .= "                  '$image_vbd," . $device . "2,w',\n";

-    }
-
-    if ( $swap_vbd )
-    {
-         if ( $image_vbd )
-         {
-            $OUT .= ",";
-         }
-
-         $OUT .= "'$swap_vbd," . $device . "1,w'";
-    }
-    $OUT .= " ]\n";
+        if ( $swap_vbd )
+        {
+            $OUT .= "                  '$swap_vbd," . $device . "1,w',\n";
+        }
+        $OUT .= "              ]\n";
    }
 }

-
 #
 #  Hostname
 #
@@ -94,8 +105,22 @@ name        = '{$hostname}'
    {
      $m = "mac=$mac"
    }
-
-    $OUT .= "vif         = [ '$m' ]";
+    my $br = '';
+    if ( $bridge )
+    {
+      if ( $mac )
+      {
+        $br = ",bridge=$bridge"
+      }
+      else
+      {
+        $br = "bridge=$bridge"
+      }
+    }
+    $OUT .= "vif         = [ '";
+    $OUT .= "$m";
+    $OUT .= "$br";
+    $OUT .= "' ]";
  }
  else
  {
@@ -114,9 +139,16 @@ name        = '{$hostname}'
      $vn = ",vifname=$vifname";
    }

-    $OUT .= "vif         = [ 'ip=$ip1";
+    my $br = '';
+    if ( $bridge )
+    {
+      $br = ",bridge=$bridge"
+    }
+
+    $OUT .= "vif         = [ 'ip=$ips";
    $OUT .= "$m";
    $OUT .= "$vn";
+    $OUT .= "$br";
    $OUT .= "' ]";
  }
 }
--- a/hooks/centos-4/10-disable-tls
+++ b/hooks/centos-4/10-disable-tls
@@ -1,49 +0,0 @@
-#!/bin/sh
-#
-#  This script disables TLS on the new image.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Don't touch TLS on 64 bit platforms.
-#
-if [ "`uname -m`" = "x86_64" ]; then
-    logMessage "Ignoring TLS since we're a 64 bit host."
-    exit
-fi
-
-
-#
-# Disable TLS and create an empty directory in its place
-# 
-mv ${prefix}/lib/tls ${prefix}/lib/tls.disabled
-mkdir ${prefix}/lib/tls
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/10-disable-tls
+++ b/hooks/centos-4/10-disable-tls
@@ -0,0 +1 @@
+../common/10-disable-tls
--- a/hooks/centos-4/15-setup-arch
+++ b/hooks/centos-4/15-setup-arch
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Record arch, if present.
-#
-if [ -d $prefix/etc/rpm ]; then
-
-    logMessage Found /etc/rpm
-
-    #
-    #  If i386 then record this
-    #
-    if [ "$arch" = "i386" ]; then
-        echo "i386-fedora-linux-gnu" >> $prefix/etc/rpm/platform
-    fi
-else
-
-    logMessage Failed to find /etc/rpm
-
-fi
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
-
--- a/hooks/centos-4/15-setup-arch
+++ b/hooks/centos-4/15-setup-arch
@@ -0,0 +1 @@
+../common/15-disable-hwclock
--- a/hooks/centos-4/20-setup-yum
+++ b/hooks/centos-4/20-setup-yum
@@ -1,51 +0,0 @@
-#!/bin/sh
-#
-#  This script sets up the Yum for CentOS4.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  DNS is probably required to run "yum update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-#
-# Update yum
-#
-if [ ! -d ${prefix}/proc ]; then
-    mkdir -p ${prefix}/proc
-fi
-mount -o bind /proc ${prefix}/proc
-chroot ${prefix} /usr/bin/yum  update
-umount ${prefix}/proc
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
-
-
-
-
--- a/hooks/centos-4/20-setup-yum
+++ b/hooks/centos-4/20-setup-yum
@@ -0,0 +1 @@
+../common/20-setup-yum
--- a/hooks/centos-4/30-disable-gettys
+++ b/hooks/centos-4/30-disable-gettys
@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-#  This script comments out all virtual terminals which aren't on the
-# first console - that must remain so that 'xm console ...' works
-# correctly.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Do the transformation.
-#
-sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' ${prefix}/etc/inittab
-
-
-#
-#  Are we using an alternative serial device?
-#
-if [ ! -z "${serial_device}" ]; then
-
-    serial_device=`basename ${serial_device}`
-
-    # Let the user know.
-    logMessage "Replacing default serial device (tty1) with ${serial_device}"
-
-    # replace existing device.
-    sed -i -e s/tty1/${serial_device}/ ${prefix}/etc/inittab
-
-    # make sure that it is allowed to login.
-    echo $serial_device >> ${prefix}/etc/securetty
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/30-disable-gettys
+++ b/hooks/centos-4/30-disable-gettys
@@ -0,0 +1 @@
+../common/30-disable-gettys
--- a/hooks/centos-4/35-setup-users
+++ b/hooks/centos-4/35-setup-users
@@ -1,181 +0,0 @@
-#!/usr/bin/perl -w
-#
-#  This script attempts to copy all user accounts from the host to
-# the guest.  It does this by copying all user accounts which are not
-# already present.
-#
-#  NOTE:  Unless '--accounts' was specified upon the 'xen-create-image'
-# command line we don't do this.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-use strict;
-use Env;
-
-
-my $prefix = shift;
-
-die "Prefix must be given"       unless defined( $prefix );
-die "Prefix must be a directory" unless ( -d $prefix );
-
-
-#
-#  Exit unless the 'accounts' variable is set.
-#
-exit unless ( $ENV{'accounts'} );
-
-#
-#  Make sure we have $prefix/etc
-#
-die "Prefix is missing /etc : $prefix" unless ( -d $prefix . "/etc" );
-
-
-#
-#  Read all accounts from the installed /etc/passwd on the guest.
-#
-my %present;
-if ( -e $prefix . "/etc/passwd" )
-{
-    %present = readAccounts( $prefix . "/etc/passwd" );
-}
-
-
-#
-#  Now read the accounts on the host.
-#
-my %host = readAccounts( "/etc/passwd" );
-
-
-#
-#  For each account not present on new installation then add it
-#
-foreach my $account ( sort keys( %host ) )
-{
-    if ( ! $present{ $account } )
-    {
-        print "Adding: $account\n";
-        addAccount( $account );
-
-        #
-        #  Find any groups the user is member of on the host
-        # and add them on the guest system
-        #
-        addGroups( $account );
-    }
-}
-
-
-
-#
-#  Read the accounts which are already present on the guest image.
-#
-sub readAccounts
-{
-    my ( $file ) = ( @_ );
-
-
-    my %found;
-
-    open( EXISTING, "<", $file );
-    foreach my $line ( <EXISTING> )
-    {
-        #
-        #  Record the userid + username
-        #
-        if ( $line =~ /^([^:]+):([^:]+):([^:]+)/ )
-        {
-            my $user = $1;
-            my $pass = $2;
-            my $uid  = $3;
-
-            $found{$user} = 1;
-        }
-    }
-    close( EXISTING );
-
-    return( %found );
-}
-
-
-
-
-#
-#  Add the passwd + shadow accounts for the given user.
-#
-sub addAccount
-{
-    my ( $user ) = ( @_ );
-
-    #
-    #  passwd file.
-    #
-    open( PASSWD, "<", "/etc/passwd" );
-    foreach my $line ( <PASSWD> )
-    {
-        chomp( $line );
-        if ( $line =~ /^\Q$user\E:/ )
-        {
-            #
-            #  Add the line
-            #
-            open( OUTY, ">>", $prefix . "/etc/passwd" );
-            print OUTY $line . "\n";
-            close( OUTY );
-        }
-    }
-    close( PASSWD );
-
-
-    #
-    #  shadow file.
-    #
-    open( SHADOW, "<", "/etc/shadow" ) or die "Failed to open : $!";
-    foreach my $line ( <SHADOW> )
-    {
-        chomp( $line );
-        if ( $line =~ /^\Q$user\E:/ )
-        {
-            #
-            #  Add the line
-            #
-            open( OUTY, ">>", $prefix . "/etc/shadow" );
-            print OUTY $line . "\n";
-            close( OUTY );
-        }
-    }
-    close( SHADOW );
-}
-
-
-
-#
-#  Find the groups a user is member of on the host, and add them to
-# those groups on the new guest.
-#
-sub addGroups
-{
-    my( $username ) = ( @_ );
-
-    #
-    #  Get the groups.
-    #
-    my $groups = `groups $username`;
-    # split off the usernmame.
-    if ( $groups =~ /^([^:]+):(.*)/ )
-    {
-        $groups = $2;
-        print "User: $username is member of the groups: $groups\n";
-    }
-
-    foreach my $g ( split( / /, $groups ) )
-    {
-        # Make sure the group exists.
-        system( "chroot $prefix /usr/sbin/addgroup $g" );
-
-        # add the user to it.
-        system( "chroot $prefix /usr/sbin/adduser $username $g" );
-    }
-}
--- a/hooks/centos-4/35-setup-users
+++ b/hooks/centos-4/35-setup-users
@@ -0,0 +1 @@
+../common/35-setup-users
--- a/hooks/centos-4/40-setup-networking
+++ b/hooks/centos-4/40-setup-networking
@@ -1,98 +0,0 @@
-#!/bin/sh
-#
-#  This script sets up the networking files for the new image.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Make sure we have an /etc/sysconfig/network-scripts directory.
-#
-mkdir -p ${prefix}/etc/sysconfig/network-scripts/
-
-
-#
-#  Test for static vs. DHCP
-#
-if [ -z "${dhcp}" ]; then
-    
-    #
-    #  Setup the initial interface
-    #
-    cat <<E_O_STATIC >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
-DEVICE=eth0
-ONBOOT=yes
-BOOTPROTO=static
-IPADDR=${ip1}
-NETMASK=${netmask}
-GATEWAY=${gateway}
-E_O_STATIC
-
-     #
-     #  Now setup any other ones.
-     #
-     interface=1
-     count=2
-
-     while [ "${count}" -le "${ip_count}" ]; do
-    
-         value=\$ip${count}
-         value=`eval echo $value`
-
-         logMessage Adding etho:${interface}
-
-         cat <<E_O_STATIC >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0:${interface}
-DEVICE=eth0:${interface}
-ONBOOT=yes
-BOOTPROTO=static
-IPADDR=${value}
-NETMASK=${netmask}
-E_O_STATIC
-         count=`expr $count + 1`
-         interface=`expr $interface + 1`
-     done
-
-else
-    cat <<E_O_DHCP >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
-DEVICE=eth0
-BOOTPROTO=dhcp
-ONBOOT=yes
-E_O_DHCP
-fi
-
-
-#
-#  Don't forget to setup the default route.
-#
-cat <<EOF >${prefix}/etc/sysconfig/network
-NETWORKING=yes
-GATEWAY=${gateway}
-HOSTNAME=${hostname}
-EOF
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/40-setup-networking
+++ b/hooks/centos-4/40-setup-networking
@@ -0,0 +1 @@
+../common/40-setup-networking-rpm
--- a/hooks/centos-4/50-setup-hostname
+++ b/hooks/centos-4/50-setup-hostname
@@ -1,122 +0,0 @@
-#!/bin/sh
-#
-#  This script places the new systems hostname into a couple of files within
-# the new image.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Setup the mailname + hostname files.
-#
-echo ${hostname} > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
-
-
-#
-#  Fixup the /etc/hosts file upon the new image for
-# machines with static IPs
-#
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-    echo "${ip1}    ${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
-    #
-    #  Stub /etc/hosts for DHCP clients.
-    #
-    cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1       localhost
-
-# The following lines are desirable for IPv6 capable hosts
-::1     ip6-localhost ip6-loopback
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
-
-EOF
-
-
-fi
-
-
-#
-#  Allow the host system to know the IP address of our new guest.
-#
-if [ -z "${dhcp}" ]; then
-
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
-
-        logMessage Host already has IP address for the host ${hostname}.
-
-    else
-
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
-
-        if [ -z "${nohosts}" ]; then
-
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
-
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-
-
-
-            #
-            #  If we've updated the /etc/hosts file on the host machine
-            # and there is an installation of dnsmasq installed then
-            # reload it.
-            #
-            #  This will let the local LAN clients lookup the new address.
-            #
-            if [ -x /usr/sbin/dnsmasq ] ; then
-                if [ -e /var/run/dnsmasq.pid ]; then
-
-                    logMessage Allowing DNSMasq to restart.
-                    kill -HUP `cat /var/run/dnsmasq.pid`
-                fi
-            fi
-        fi
-    fi
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/50-setup-hostname
+++ b/hooks/centos-4/50-setup-hostname
@@ -0,0 +1 @@
+../common/50-setup-hostname-rpm
--- a/hooks/centos-4/55-create-dev
+++ b/hooks/centos-4/55-create-dev
@@ -1,53 +0,0 @@
-#!/bin/sh
-#
-#  This script ensures that the new guest images have a nicely
-# populated /dev directory.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-
-#
-# Early termination if we have a couple of common devices present
-# should speed up installs which use --copy/--tar
-#
-if ( test `ls -1 ${prefix}/dev | wc -l` -gt 10 ); then
-    logMessage "Terminating because there appear to be files in /dev already"
-    exit
-fi
-
-
-#
-#  Make the device nodes.
-#
-chroot ${prefix} /bin/sh -c 'cd /dev && ./MAKEDEV console'
-chroot ${prefix} /bin/sh -c 'cd /dev && ./MAKEDEV null'
-chroot ${prefix} /bin/sh -c 'cd /dev && ./MAKEDEV zero'
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/55-create-dev
+++ b/hooks/centos-4/55-create-dev
@@ -0,0 +1 @@
+../common/55-create-dev
--- a/hooks/centos-4/60-copy-host-files
+++ b/hooks/centos-4/60-copy-host-files
@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-#  Copy files from a 'skel' directory, if present, into the
-# new images
-#
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Copy "required" files from our host.
-#
-# NONE DONE
-
-#
-# If the host has sudo then copy the configuration file, and install
-# the package
-#
-if [ -e /etc/sudoers ]; then
-
-  logMessage Installing SUDO too.
-
-  #
-  #  Copy file and fixup permissions.
-  #
-  cp /etc/sudoers ${prefix}/etc
-  chown root:root ${prefix}/etc/sudoers
-  chmod 440       ${prefix}/etc/sudoers
-
-  #
-  #  Install sudo
-  #
-  installCentOS4Package ${prefix} sudo
-
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/65-copy-user-files
+++ b/hooks/centos-4/65-copy-user-files
@@ -1,49 +0,0 @@
-#!/bin/sh
-#
-#  Copy files from a 'skel' directory, if present, into the
-# new images
-#
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Copy everything from the skel directory into the new instance
-# if that directory exists.
-#
-if [ -d /etc/xen-tools/skel ]; then
-
-    logMessage Copying files from /etc/xen-tools/skel
-
-    (cd /etc/xen-tools/skel; tar -cf - . ) | (cd ${prefix}/; tar -xpf -)
-
-    logMessage Finished
-
-else
-
-    logMessage skel directory, /etc/xen-tools/skell, not present ignoring.
-
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/65-copy-user-files
+++ b/hooks/centos-4/65-copy-user-files
@@ -0,0 +1 @@
+../common/65-copy-user-files
--- a/hooks/centos-4/70-install-ssh
+++ b/hooks/centos-4/70-install-ssh
@@ -1,42 +0,0 @@
-#!/bin/sh
-#
-#  This script installs OpenSSH upon the new system.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-#
-# Install the OpenSSH server.
-#
-if [ ! -d ${prefix}/proc ]; then
-    mkdir -p ${prefix}/proc
-fi
-mount -o bind /proc ${prefix}/proc
-chroot ${prefix} /usr/bin/yum  -y install openssh-server passwd
-umount ${prefix}/proc
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/70-install-ssh
+++ b/hooks/centos-4/70-install-ssh
@@ -0,0 +1 @@
+../common/70-install-ssh-rpm
--- a/hooks/centos-4/75-fixup-securetty
+++ b/hooks/centos-4/75-fixup-securetty
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-#  This script ensures /etc/securetty upon the new guests has the new
-# Xen console devices in it
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-#
-# If the file doesn't exist exit early.
-#
-if [ ! -e ${prefix}/etc/securetty ]; then
-    logMesage /etc/securetty not found.
-    exit
-fi
-
-
-#
-#  Do both the devices.
-#
-for i in xvc0 hvc0 ; do
-
-    #
-    #  Only append if not presnt.
-    #
-    if ( grep $i ${prefix}/etc/securetty > /dev/null ) ; then
-
-        logMessage Host already has $i entry
-
-    else
-        
-        echo $i >> ${prefix}/etc/securetty
-    fi
-
-done
-
-
-#
-# Log our finish
-#
-logMessage Script $0 finished.
-
--- a/hooks/centos-4/75-fixup-securetty
+++ b/hooks/centos-4/75-fixup-securetty
@@ -0,0 +1 @@
+../common/75-fixup-securetty
--- a/hooks/centos-4/80-install-modules
+++ b/hooks/centos-4/80-install-modules
@@ -1,41 +0,0 @@
-#!/bin/sh
-#
-#  Install modules from the host system into the new image.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Copy the modules from the host to the new system - we should only
-# really copy the *correct* modules, but we don't know what they are.
-#
-mkdir -p ${prefix}/lib/modules
-cp -au /lib/modules/*/ ${prefix}/lib/modules
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/80-install-modules
+++ b/hooks/centos-4/80-install-modules
@@ -0,0 +1 @@
+../common/80-install-modules-rpm
--- a/hooks/centos-4/90-make-fstab
+++ b/hooks/centos-4/90-make-fstab
@@ -1,112 +0,0 @@
-#!/bin/sh
-#
-#  This script is responsible for setting up /etc/fstab upon the
-# new instance.
-#
-#  This should be a simple job, but it is complicated by some of the
-# differences between filesystems - some root filesystems will require
-# the installation of new packages, and we have to handle that here.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-logMessage Filesystem options are ${options}
-
-
-#
-# Find the root device.
-#
-#  1.  default to sda.
-#
-#  2.  If --ide is specified use hda.
-#
-#  3.  Otherwise use a named $disk_device
-#
-device=sda
-if [ "${ide}" ]; then
-    device=hda
-else
-    if [ ! -z "${disk_device}" ]; then
-        device=`basename $disk_device`
-    fi
-fi
-
-logMessage "Root device is /dev/$device"
-
-
-#
-#  Now we have the options we can create the fstab.
-#
-has_xfs=0
-has_reiserfs=0
-cat <<E_O_FSTAB > ${prefix}/etc/fstab
-# /etc/fstab: static file system information.
-#
-# <file system> <mount point>   <type>  <options>       <dump>  <pass>
-proc            /proc           proc    defaults        0       0
-devpts          /dev/pts        devpts  rw,noexec,nosuid,gid=5,mode=620 0  0
-E_O_FSTAB
-for part in `seq 1 ${NUMPARTITIONS}`; do
-    eval "PARTITION=\"\${PARTITION${part}}\""
-    OLDIFS="${IFS}"
-    IFS=:
-    x=0
-    for partdata in ${PARTITION}; do
-        eval "partdata${x}=\"${partdata}\""
-        x=$(( $x+1 ))
-    done
-    IFS="${OLDIFS}"
-
-    case "${partdata2}" in
-        xfs)
-            has_xfs=1
-            ;;
-        reiserfs)
-            has_reiserfs=1
-            ;;
-    esac
-
-    if [ "${partdata2}" = "swap" ]; then
-        echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
-    else
-        echo "/dev/${device}${part} ${partdata3} ${partdata2} ${partdata4} 0 1" >> ${prefix}/etc/fstab
-    fi
-done
-
-
-#
-#  Finally we can install any required packages for the given root
-# filesystem
-#
-#if [ $has_xfs -eq 1 ]; then
-#    installDebianPackage ${prefix} xfsprogs
-#fi
-#if [ $has_reiserfs -eq 1 ]; then
-#    installDebianPackage ${prefix} reiserfsprogs
-#fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/90-make-fstab
+++ b/hooks/centos-4/90-make-fstab
@@ -0,0 +1 @@
+../common/90-make-fstab
--- a/hooks/centos-4/99-clean-image
+++ b/hooks/centos-4/99-clean-image
@@ -1,49 +0,0 @@
-#!/bin/sh
-#
-#  This script cleans the yum database on the new system.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Clean up RPM files.
-#
-logMessage Cleaning .rpm* files.
-find ${prefix}/ -name '*.rpmorig' -exec rm -f \{\} \;
-find ${prefix}/ -name '*.rpmnew' -exec rm -f \{\} \;
-
-#
-#  Clean yum
-#
-logMessage Cleaning Yum Repository
-if [ ! -d ${prefix}/proc ]; then
-    mkdir -p ${prefix}/proc
-fi
-mount -o bind /proc ${prefix}/proc
-chroot ${prefix} /usr/bin/yum clean all
-umount ${prefix}/proc
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-4/99-clean-image
+++ b/hooks/centos-4/99-clean-image
@@ -0,0 +1 @@
+../common/99-clean-image-rpm
--- a/hooks/centos-5/10-disable-tls
+++ b/hooks/centos-5/10-disable-tls
@@ -1,49 +0,0 @@
-#!/bin/sh
-#
-#  This script disables TLS on the new image.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Don't touch TLS on 64 bit platforms.
-#
-if [ "`uname -m`" = "x86_64" ]; then
-    logMessage "Ignoring TLS since we're a 64 bit host."
-    exit
-fi
-
-
-#
-# Disable TLS and create an empty directory in its place
-# 
-mv ${prefix}/lib/tls ${prefix}/lib/tls.disabled
-mkdir ${prefix}/lib/tls
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/10-disable-tls
+++ b/hooks/centos-5/10-disable-tls
@@ -0,0 +1 @@
+../common/10-disable-tls
--- a/hooks/centos-5/15-setup-arch
+++ b/hooks/centos-5/15-setup-arch
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Record arch, if present.
-#
-if [ -d $prefix/etc/rpm ]; then
-
-    logMessage Found /etc/rpm
-
-    #
-    #  If i386 then record this
-    #
-    if [ "$arch" = "i386" ]; then
-        echo "i386-fedora-linux-gnu" >> $prefix/etc/rpm/platform
-    fi
-else
-
-    logMessage Failed to find /etc/rpm
-
-fi
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
-
--- a/hooks/centos-5/15-setup-arch
+++ b/hooks/centos-5/15-setup-arch
@@ -0,0 +1 @@
+../common/15-disable-hwclock
--- a/hooks/centos-5/20-setup-yum
+++ b/hooks/centos-5/20-setup-yum
@@ -1,53 +0,0 @@
-#!/bin/sh
-#
-#  This script sets up the Yum for CentOS4.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  DNS is probably required to run "yum update".
-#
-cp /etc/resolv.conf ${prefix}/etc
-
-
-#
-# Update yum
-#
-if [ ! -d ${prefix}/proc ]; then
-    mkdir -p ${prefix}/proc
-fi
-mount -o bind /proc ${prefix}/proc
-chroot ${prefix} /usr/bin/yum update
-umount ${prefix}/proc
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
-
-
-
-
--- a/hooks/centos-5/20-setup-yum
+++ b/hooks/centos-5/20-setup-yum
@@ -0,0 +1 @@
+../common/20-setup-yum
--- a/hooks/centos-5/25-setup-kernel
+++ b/hooks/centos-5/25-setup-kernel
@@ -0,0 +1,76 @@
+#!/bin/sh
+#
+#  This script sets up the kernel and fstab for CentOS 5.
+#
+
+prefix=$1
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+#
+# Log our start
+#
+
+logMessage Script $0 starting
+
+# Make the console work
+sed -i "/Cancelled/ {G;s/$/co:2345:respawn:\/sbin\/mingetty console/;}" ${prefix}/etc/inittab
+sed -i "s/^1:2345/#1:2345/" ${prefix}/etc/inittab
+
+# MAKEDEV is needed at this point
+chroot ${prefix} ln -s /sbin/MAKEDEV /dev/MAKEDEV
+chroot ${prefix} /sbin/MAKEDEV sda sdb sdc sdd
+
+# Create fstab
+logMessage Create /etc/fstab
+cat > ${prefix}/etc/fstab << EOF
+# /etc/fstab: static file system information.
+#
+# <file system> <mount point>   <type>  <options>       <dump>  <pass>
+proc            /proc           proc    defaults        0       0
+none            /dev/pts        devpts  mode=0620       0       0
+EOF
+
+for i in `seq 1 $NUMPARTITIONS`; do
+  echo -n "/dev/xvde$i " >> ${prefix}/etc/fstab
+  eval part=\$PARTITION$i
+  if [ ! -z "`echo $part | grep swap`" ]; then
+     echo "none swap ws 0 0" >> ${prefix}/etc/fstab
+  else
+     echo $part | awk -F: '{print $4,$3,$5,0,1}' >> ${prefix}/etc/fstab
+  fi
+done
+
+# Install the kernel, grub and perl
+chroot ${prefix} yum clean expire-cache
+chroot ${prefix} yum -y install kernel-xen grub.x86_64 perl.x86_64
+
+KERNELVERSION=`ls ${prefix}/boot/vmlinuz-* | sed "s#$prefix/boot/vmlinuz-##"`
+logMessage "Kernel $KERNELVERSION found"
+
+# Create grub's menu.list
+logMessage "Creating /boot/grub/menu.lst"
+mkdir -p ${prefix}/boot/grub
+cat > ${prefix}/boot/grub/menu.lst << EOF
+# WARNING : Don't forget to update this when you upgrade kernel !
+# You can also exclude kernel-xen from updates by putting
+# exclude=kernel-xen in in [main] in yum.conf
+
+default=0
+timeout=5
+title CentOS ($KERNELVERSION)
+kernel        /boot/vmlinuz-$KERNELVERSION xen_pv_hvm=enable
+initrd        /boot/initrd-$KERNELVERSION.img
+EOF
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished
--- a/hooks/centos-5/30-disable-gettys
+++ b/hooks/centos-5/30-disable-gettys
@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-#  This script comments out all virtual terminals which aren't on the
-# first console - that must remain so that 'xm console ...' works
-# correctly.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Do the transformation.
-#
-sed -i -e 's/^\([2-6].*:respawn*\)/#\1/' -e 's/^T/#\t/' ${prefix}/etc/inittab
-
-
-#
-#  Are we using an alternative serial device?
-#
-if [ ! -z "${serial_device}" ]; then
-
-    serial_device=`basename ${serial_device}`
-
-    # Let the user know.
-    logMessage "Replacing default serial device (tty1) with ${serial_device}"
-
-    # replace existing device.
-    sed -i -e s/tty1/${serial_device}/ ${prefix}/etc/inittab
-
-    # make sure that it is allowed to login.
-    echo $serial_device >> ${prefix}/etc/securetty
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/30-disable-gettys
+++ b/hooks/centos-5/30-disable-gettys
@@ -0,0 +1 @@
+../common/30-disable-gettys
--- a/hooks/centos-5/35-setup-users
+++ b/hooks/centos-5/35-setup-users
@@ -1,181 +0,0 @@
-#!/usr/bin/perl -w
-#
-#  This script attempts to copy all user accounts from the host to
-# the guest.  It does this by copying all user accounts which are not
-# already present.
-#
-#  NOTE:  Unless '--accounts' was specified upon the 'xen-create-image'
-# command line we don't do this.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-use strict;
-use Env;
-
-
-my $prefix = shift;
-
-die "Prefix must be given"       unless defined( $prefix );
-die "Prefix must be a directory" unless ( -d $prefix );
-
-
-#
-#  Exit unless the 'accounts' variable is set.
-#
-exit unless ( $ENV{'accounts'} );
-
-#
-#  Make sure we have $prefix/etc
-#
-die "Prefix is missing /etc : $prefix" unless ( -d $prefix . "/etc" );
-
-
-#
-#  Read all accounts from the installed /etc/passwd on the guest.
-#
-my %present;
-if ( -e $prefix . "/etc/passwd" )
-{
-    %present = readAccounts( $prefix . "/etc/passwd" );
-}
-
-
-#
-#  Now read the accounts on the host.
-#
-my %host = readAccounts( "/etc/passwd" );
-
-
-#
-#  For each account not present on new installation then add it
-#
-foreach my $account ( sort keys( %host ) )
-{
-    if ( ! $present{ $account } )
-    {
-        print "Adding: $account\n";
-        addAccount( $account );
-
-        #
-        #  Find any groups the user is member of on the host
-        # and add them on the guest system
-        #
-        addGroups( $account );
-    }
-}
-
-
-
-#
-#  Read the accounts which are already present on the guest image.
-#
-sub readAccounts
-{
-    my ( $file ) = ( @_ );
-
-
-    my %found;
-
-    open( EXISTING, "<", $file );
-    foreach my $line ( <EXISTING> )
-    {
-        #
-        #  Record the userid + username
-        #
-        if ( $line =~ /^([^:]+):([^:]+):([^:]+)/ )
-        {
-            my $user = $1;
-            my $pass = $2;
-            my $uid  = $3;
-
-            $found{$user} = 1;
-        }
-    }
-    close( EXISTING );
-
-    return( %found );
-}
-
-
-
-
-#
-#  Add the passwd + shadow accounts for the given user.
-#
-sub addAccount
-{
-    my ( $user ) = ( @_ );
-
-    #
-    #  passwd file.
-    #
-    open( PASSWD, "<", "/etc/passwd" );
-    foreach my $line ( <PASSWD> )
-    {
-        chomp( $line );
-        if ( $line =~ /^\Q$user\E:/ )
-        {
-            #
-            #  Add the line
-            #
-            open( OUTY, ">>", $prefix . "/etc/passwd" );
-            print OUTY $line . "\n";
-            close( OUTY );
-        }
-    }
-    close( PASSWD );
-
-
-    #
-    #  shadow file.
-    #
-    open( SHADOW, "<", "/etc/shadow" ) or die "Failed to open : $!";
-    foreach my $line ( <SHADOW> )
-    {
-        chomp( $line );
-        if ( $line =~ /^\Q$user\E:/ )
-        {
-            #
-            #  Add the line
-            #
-            open( OUTY, ">>", $prefix . "/etc/shadow" );
-            print OUTY $line . "\n";
-            close( OUTY );
-        }
-    }
-    close( SHADOW );
-}
-
-
-
-#
-#  Find the groups a user is member of on the host, and add them to
-# those groups on the new guest.
-#
-sub addGroups
-{
-    my( $username ) = ( @_ );
-
-    #
-    #  Get the groups.
-    #
-    my $groups = `groups $username`;
-    # split off the usernmame.
-    if ( $groups =~ /^([^:]+):(.*)/ )
-    {
-        $groups = $2;
-        print "User: $username is member of the groups: $groups\n";
-    }
-
-    foreach my $g ( split( / /, $groups ) )
-    {
-        # Make sure the group exists.
-        system( "chroot $prefix /usr/sbin/addgroup $g" );
-
-        # add the user to it.
-        system( "chroot $prefix /usr/sbin/adduser $username $g" );
-    }
-}
--- a/hooks/centos-5/35-setup-users
+++ b/hooks/centos-5/35-setup-users
@@ -0,0 +1 @@
+../common/35-setup-users
--- a/hooks/centos-5/40-setup-networking
+++ b/hooks/centos-5/40-setup-networking
@@ -1,98 +0,0 @@
-#!/bin/sh
-#
-#  This script sets up the networking files for the new image.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Make sure we have an /etc/sysconfig/network-scripts directory.
-#
-mkdir -p ${prefix}/etc/sysconfig/network-scripts/
-
-
-#
-#  Test for static vs. DHCP
-#
-if [ -z "${dhcp}" ]; then
-    
-    #
-    #  Setup the initial interface
-    #
-    cat <<E_O_STATIC >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
-DEVICE=eth0
-ONBOOT=yes
-BOOTPROTO=static
-IPADDR=${ip1}
-NETMASK=${netmask}
-GATEWAY=${gateway}
-E_O_STATIC
-
-     #
-     #  Now setup any other ones.
-     #
-     interface=1
-     count=2
-
-     while [ "${count}" -le "${ip_count}" ]; do
-    
-         value=\$ip${count}
-         value=`eval echo $value`
-
-         logMessage Adding etho:${interface}
-
-         cat <<E_O_STATIC >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0:${interface}
-DEVICE=eth0:${interface}
-ONBOOT=yes
-BOOTPROTO=static
-IPADDR=${value}
-NETMASK=${netmask}
-E_O_STATIC
-         count=`expr $count + 1`
-         interface=`expr $interface + 1`
-     done
-
-else
-    cat <<E_O_DHCP >${prefix}/etc/sysconfig/network-scripts/ifcfg-eth0
-DEVICE=eth0
-BOOTPROTO=dhcp
-ONBOOT=yes
-E_O_DHCP
-fi
-
-
-#
-#  Don't forget to setup the default route.
-#
-cat <<EOF >${prefix}/etc/sysconfig/network
-NETWORKING=yes
-GATEWAY=${gateway}
-HOSTNAME=${hostname}
-EOF
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/40-setup-networking
+++ b/hooks/centos-5/40-setup-networking
@@ -0,0 +1 @@
+../common/40-setup-networking-rpm
--- a/hooks/centos-5/50-setup-hostname
+++ b/hooks/centos-5/50-setup-hostname
@@ -1,119 +0,0 @@
-#!/bin/sh
-#
-#  This script places the new systems hostname into a couple of files within
-# the new image.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Setup the mailname + hostname files.
-#
-echo ${hostname} > ${prefix}/etc/hostname
-echo ${hostname} > ${prefix}/etc/mailname
-
-
-#
-#  Fixup the /etc/hosts file upon the new image for
-# machines with static IPs
-#
-if [ -z "${dhcp}" ]; then
-
-    # Non-IPv6 stuff.
-    grep -v '\(::\|IPv6\)' /etc/hosts > ${prefix}/etc/hosts
-
-    # New entry.
-    echo "${ip1}    ${hostname}" >> ${prefix}/etc/hosts
-    echo " " >> ${prefix}/etc/hosts
-
-    # IPv6 stuff.
-    grep '\(::\|IPv6\)' /etc/hosts >> ${prefix}/etc/hosts
-
-else
-
-    #
-    #  Stub /etc/hosts for DHCP clients.
-    #
-    cat >> ${prefix}/etc/hosts <<EOF
-127.0.0.1       localhost
-
-# The following lines are desirable for IPv6 capable hosts
-::1     ip6-localhost ip6-loopback
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
-
-EOF
-
-
-fi
-
-
-#
-#  Allow the host system to know the IP address of our new guest.
-#
-if [ -z "${dhcp}" ]; then
-
-    if ( grep ${hostname} /etc/hosts > /dev/null ) ; then
-
-        logMessage Host already has IP address for the host ${hostname}.
-
-    else
-
-        #
-        #  Short host name.
-        #
-        name=`echo ${hostname} | awk -F. '{print $1}'`
-
-        if [ -z "${nohosts}" ]; then
-
-            logMessage Adding ${hostname} and ${name} to /etc/hosts on the host
-            echo "${ip1}    ${hostname}    ${name}" >> /etc/hosts
-
-           #
-           #  If we've updated the /etc/hosts file on the host machine
-           # and there is an installation of dnsmasq installed then
-           # reload it.
-           #
-           #  This will let the local LAN clients lookup the new address.
-           #
-            if [ -x /usr/sbin/dnsmasq ] ; then
-                if [ -e /var/run/dnsmasq.pid ]; then
-
-                    logMessage Allowing DNSMasq to restart.
-                    kill -HUP `cat /var/run/dnsmasq.pid`
-                fi
-            fi
-        fi
-    fi
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/50-setup-hostname
+++ b/hooks/centos-5/50-setup-hostname
@@ -0,0 +1 @@
+../common/50-setup-hostname-rpm
--- a/hooks/centos-5/55-create-dev
+++ b/hooks/centos-5/55-create-dev
@@ -1,53 +0,0 @@
-#!/bin/sh
-#
-#  This script ensures that the new guest images have a nicely
-# populated /dev directory.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-
-#
-# Early termination if we have a couple of common devices present
-# should speed up installs which use --copy/--tar
-#
-if ( test `ls -1 ${prefix}/dev | wc -l` -gt 10 ); then
-    logMessage "Terminating because there appear to be files in /dev already"
-    exit
-fi
-
-
-#
-#  Make the device nodes.
-#
-chroot ${prefix} /bin/sh -c 'cd /dev && ./MAKEDEV console'
-chroot ${prefix} /bin/sh -c 'cd /dev && ./MAKEDEV null'
-chroot ${prefix} /bin/sh -c 'cd /dev && ./MAKEDEV zero'
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/55-create-dev
+++ b/hooks/centos-5/55-create-dev
@@ -0,0 +1 @@
+../common/55-create-dev
--- a/hooks/centos-5/65-copy-user-files
+++ b/hooks/centos-5/65-copy-user-files
@@ -1,49 +0,0 @@
-#!/bin/sh
-#
-#  Copy files from a 'skel' directory, if present, into the
-# new images
-#
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Copy everything from the skel directory into the new instance
-# if that directory exists.
-#
-if [ -d /etc/xen-tools/skel ]; then
-
-    logMessage Copying files from /etc/xen-tools/skel
-
-    (cd /etc/xen-tools/skel; tar -cf - . ) | (cd ${prefix}/; tar -xpf -)
-
-    logMessage Finished
-
-else
-
-    logMessage skel directory, /etc/xen-tools/skell, not present ignoring.
-
-fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/65-copy-user-files
+++ b/hooks/centos-5/65-copy-user-files
@@ -0,0 +1 @@
+../common/65-copy-user-files
--- a/hooks/centos-5/70-install-ssh
+++ b/hooks/centos-5/70-install-ssh
@@ -1,42 +0,0 @@
-#!/bin/sh
-#
-#  This script installs OpenSSH upon the new system.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-#
-# Install the OpenSSH server.
-#
-if [ ! -d ${prefix}/proc ]; then
-    mkdir -p ${prefix}/proc
-fi
-mount -o bind /proc ${prefix}/proc
-chroot ${prefix} /usr/bin/yum  -y install openssh-server passwd
-umount ${prefix}/proc
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/70-install-ssh
+++ b/hooks/centos-5/70-install-ssh
@@ -0,0 +1 @@
+../common/70-install-ssh-rpm
--- a/hooks/centos-5/75-fixup-securetty
+++ b/hooks/centos-5/75-fixup-securetty
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-#  This script ensures /etc/securetty upon the new guests has the new
-# Xen console devices in it
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-#
-# If the file doesn't exist exit early.
-#
-if [ ! -e ${prefix}/etc/securetty ]; then
-    logMesage /etc/securetty not found.
-    exit
-fi
-
-
-#
-#  Do both the devices.
-#
-for i in xvc0 hvc0 ; do
-
-    #
-    #  Only append if not presnt.
-    #
-    if ( grep $i ${prefix}/etc/securetty > /dev/null ) ; then
-
-        logMessage Host already has $i entry
-
-    else
-        
-        echo $i >> ${prefix}/etc/securetty
-    fi
-
-done
-
-
-#
-# Log our finish
-#
-logMessage Script $0 finished.
-
--- a/hooks/centos-5/75-fixup-securetty
+++ b/hooks/centos-5/75-fixup-securetty
@@ -0,0 +1 @@
+../common/75-fixup-securetty
--- a/hooks/centos-5/80-install-modules
+++ b/hooks/centos-5/80-install-modules
@@ -1,41 +0,0 @@
-#!/bin/sh
-#
-#  Install modules from the host system into the new image.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-#  Copy the modules from the host to the new system - we should only
-# really copy the *correct* modules, but we don't know what they are.
-#
-mkdir -p ${prefix}/lib/modules
-cp -au /lib/modules/*/ ${prefix}/lib/modules
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/80-install-modules
+++ b/hooks/centos-5/80-install-modules
@@ -0,0 +1 @@
+../common/80-install-modules-rpm
--- a/hooks/centos-5/90-make-fstab
+++ b/hooks/centos-5/90-make-fstab
@@ -1,113 +0,0 @@
-#!/bin/sh
-#
-#  This script is responsible for setting up /etc/fstab upon the
-# new instance.
-#
-#  This should be a simple job, but it is complicated by some of the
-# differences between filesystems - some root filesystems will require
-# the installation of new packages, and we have to handle that here.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-logMessage Filesystem options are ${options}
-
-
-
-#
-# Find the root device.
-#
-#  1.  default to sda.
-#
-#  2.  If --ide is specified use hda.
-#
-#  3.  Otherwise use a named $disk_device
-#
-device=sda
-if [ "${ide}" ]; then
-    device=hda
-else
-    if [ ! -z "${disk_device}" ]; then
-        device=`basename $disk_device`
-    fi
-fi
-
-logMessage "Root device is /dev/$device"
-
-
-#
-#  Now we have the options we can create the fstab.
-#
-has_xfs=0
-has_reiserfs=0
-cat <<E_O_FSTAB > ${prefix}/etc/fstab
-# /etc/fstab: static file system information.
-#
-# <file system> <mount point>   <type>  <options>       <dump>  <pass>
-proc            /proc           proc    defaults        0       0
-none            /dev/pts        devpts  mode=0620       0       0
-E_O_FSTAB
-for part in `seq 1 ${NUMPARTITIONS}`; do
-    eval "PARTITION=\"\${PARTITION${part}}\""
-    OLDIFS="${IFS}"
-    IFS=:
-    x=0
-    for partdata in ${PARTITION}; do
-        eval "partdata${x}=\"${partdata}\""
-        x=$(( $x+1 ))
-    done
-    IFS="${OLDIFS}"
-    
-    case "${partdata2}" in
-        xfs)
-            has_xfs=1
-            ;;
-        reiserfs)
-            has_reiserfs=1
-            ;;
-    esac
-    
-    if [ "${partdata2}" = "swap" ]; then
-        echo "/dev/${device}${part} none swap sw 0 0" >> ${prefix}/etc/fstab
-    else
-        echo "/dev/${device}${part} ${partdata3} ${partdata2} ${partdata4} 0 1" >> ${prefix}/etc/fstab
-    fi
-done
-
-
-#
-#  Finally we can install any required packages for the given root
-# filesystem
-#
-#if [ $has_xfs -eq 1 ]; then
-#    installDebianPackage ${prefix} xfsprogs
-#fi
-#if [ $has_reiserfs -eq 1 ]; then
-#    installDebianPackage ${prefix} reiserfsprogs
-#fi
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/90-make-fstab
+++ b/hooks/centos-5/90-make-fstab
@@ -0,0 +1 @@
+../common/90-make-fstab
--- a/hooks/centos-5/99-clean-image
+++ b/hooks/centos-5/99-clean-image
@@ -1,51 +0,0 @@
-#!/bin/sh
-#
-#  This script cleans the yum database on the new system.
-#
-# Steve
-# --
-# http://www.steve.org.uk/
-
-
-prefix=$1
-
-#
-#  Source our common functions
-#
-if [ -e /usr/lib/xen-tools/common.sh ]; then
-    . /usr/lib/xen-tools/common.sh
-else
-    . ./hooks/common.sh
-fi
-
-
-#
-# Log our start
-#
-logMessage Script $0 starting
-
-
-#
-# Clean up RPM files.
-#
-logMessage Cleaning .rpm* files.
-find ${prefix}/ -name '*.rpmorig' -exec rm -f \{\} \;
-find ${prefix}/ -name '*.rpmnew' -exec rm -f \{\} \;
-
-#
-#  Clean yum
-#
-logMessage Cleaning Yum Repository
-
-if [ ! -d ${prefix}/proc ]; then
-    mkdir -p ${prefix}/proc
-fi
-mount -o bind /proc ${prefix}/proc
-chroot ${prefix} /usr/bin/yum  clean all
-umount ${prefix}/proc
-
-
-#
-#  Log our finish
-#
-logMessage Script $0 finished
--- a/hooks/centos-5/99-clean-image
+++ b/hooks/centos-5/99-clean-image
@@ -0,0 +1 @@
+../common/99-clean-image-rpm
--- a/hooks/centos-6/10-disable-tls
+++ b/hooks/centos-6/10-disable-tls
@@ -0,0 +1 @@
+../common/10-disable-tls
--- a/hooks/centos-6/15-setup-arch
+++ b/hooks/centos-6/15-setup-arch
@@ -0,0 +1 @@
+../common/15-disable-hwclock
--- a/hooks/centos-6/20-setup-yum
+++ b/hooks/centos-6/20-setup-yum
@@ -0,0 +1 @@
+../common/20-setup-yum
--- a/hooks/centos-6/25-setup-kernel
+++ b/hooks/centos-6/25-setup-kernel
@@ -0,0 +1,83 @@
+#!/bin/sh
+#
+#  This script sets up the kernel and fstab for CentOS 5.
+#
+
+prefix=$1
+
+#
+#  Source our common functions
+#
+if [ -e /usr/lib/xen-tools/common.sh ]; then
+    . /usr/lib/xen-tools/common.sh
+else
+    . ./hooks/common.sh
+fi
+
+#
+# Log our start
+#
+
+logMessage Script $0 starting
+
+# Make the console work
+sed -i "/Cancelled/ {G;s/$/co:2345:respawn:\/sbin\/mingetty console/;}" ${prefix}/etc/inittab
+sed -i "s/^1:2345/#1:2345/" ${prefix}/etc/inittab
+
+# MAKEDEV is needed at this point
+chroot ${prefix} ln -s /sbin/MAKEDEV /dev/MAKEDEV
+chroot ${prefix} /sbin/MAKEDEV sda sdb sdc sdd
+
+# Create fstab
+logMessage Create /etc/fstab
+cat > ${prefix}/etc/fstab << EOF
+# /etc/fstab: static file system information.
+#
+# <file system> <mount point>   <type>  <options>       <dump>  <pass>
+proc            /proc           proc    defaults        0       0
+none            /dev/pts        devpts  mode=0620       0       0
+EOF
+
+for i in `seq 1 $NUMPARTITIONS`; do
+  echo -n "/dev/sda$i " >> ${prefix}/etc/fstab
+  eval part=\$PARTITION$i
+  if [ ! -z "`echo $part | grep swap`" ]; then
+     echo "none swap ws 0 0" >> ${prefix}/etc/fstab
+  else
+     echo $part | awk -F: '{print $4,$3,$5,0,1}' >> ${prefix}/etc/fstab
+  fi
+done
+
+# Install the kernel, grub and perl
+chroot ${prefix} yum clean expire-cache
+chroot ${prefix} yum -y install kernel-xen grub.x86_64 perl.x86_64
+
+KERNELVERSION=`ls ${prefix}/boot/vmlinuz-* | sed "s#$prefix/boot/vmlinuz-##"`
+logMessage "Kernel $KERNELVERSION found"
+
+# Create grub's menu.list
+logMessage "Creating /boot/grub/menu.lst"
+mkdir -p ${prefix}/boot/grub
+cat > ${prefix}/boot/grub/menu.lst << EOF
+# WARNING : Don't forget to update this when you upgrade kernel !
+# You can also exclude kernel-xen from updates by putting
+# exclude=kernel-xen in in [main] in yum.conf
+
+default=0
+timeout=5
+title CentOS ($KERNELVERSION)
+kernel        /boot/vmlinuz-$KERNELVERSION
+initrd        /boot/initramfs-$KERNELVERSION.img
+EOF
+
+# Some use lvm but mkinitrd will generate a wrong initrd when these are present.
+rm -f ${prefix}/etc/lvm/backup/* ${prefix}/etc/lvm/archive/*
+
+# Generate a correct initrd.
+chroot ${prefix} mkinitrd --with=xenblk --with=xennet --preload=xenblk --preload=xennet\
+ -f /boot/initramfs-$KERNELVERSION.img $KERNELVERSION
+
+#
+#  Log our finish
+#
+logMessage Script $0 finished
--- a/hooks/centos-6/30-disable-gettys
+++ b/hooks/centos-6/30-disable-gettys
@@ -0,0 +1 @@
+../common/30-disable-gettys
--- a/hooks/centos-6/35-setup-users
+++ b/hooks/centos-6/35-setup-users
@@ -0,0 +1 @@
+../common/35-setup-users
--- a/Show More
+++ b/Show More
				`@@ -1 +0,0 @@`
				`d75c787add2a7ceb19b30b018d4d16b7317c772d release-4.`