Paul Mackerras d4fec95044 arty a7: Turn on LED 5 when SD card command-done interrupt is enabled ...

This snoops writes to the interrupt enable registers of the SD card
interfaces and records whether the command-done interrupt is enabled.
LED 5 is turned on whenever either interface has this interrupt enabled
in order to serve as a disk activity indicator.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

2026-02-04 09:50:11 +11:00

..

acorn-cle-215.xdc

acorn: Add support for the Acorn CLE 215+

2020-08-07 15:42:07 +10:00

antmicro_artix_dc_scm.xdc

antmicro-artix-dc-scm: Add Ethernet pins

2022-08-31 18:36:26 +09:30

arty_a7.xdc

arty a7: Put the top 8 GPIOs on pmod B

2026-02-04 09:50:04 +11:00

clk_gen_bypass.vhd

Fix clk_gen_bypass

2019-10-13 14:41:53 +11:00

clk_gen_ecp5.vhd

ECP5: Adjust PLL constants so the PLL lock indication works

2021-10-16 20:14:12 +11:00

clk_gen_mcmm.vhd

Fix some whitespace issues

2021-08-09 11:57:00 +10:00

clk_gen_plle2.vhd

fpga/clk_gen_plle2: Add support for 50Mhz->100Mhz

2021-09-25 18:18:32 +10:00

cmod_a7-35.xdc

Remove -add from xdc files

2021-08-09 13:30:26 +10:00

firmware.hex

Add a few more FPGA related files

2019-08-23 16:23:53 +10:00

fpga-random.vhdl

Add random number generator and implement the darn instruction

2020-08-06 11:31:13 +10:00

fpga-random.xdc

Add random number generator and implement the darn instruction

2020-08-06 11:31:13 +10:00

genesys2.xdc

Remove -waveform from xdc files

2021-08-09 13:30:26 +10:00

hello_world.hex

hello_world: Use new headers and frequency from syscon

2020-05-08 21:06:16 +10:00

LICENSE

Initial import of microwatt

2019-08-22 16:46:13 +10:00

main_bram.vhdl

Rename 'do' signal to avoid verilator System Verilog warning

2021-08-13 13:52:51 +10:00

nexys_a7.xdc

Remove -add from xdc files

2021-08-09 13:30:26 +10:00

nexys-video.xdc

litesdcard: Add Nexys Video support

2021-08-10 14:08:22 +10:00

pp_fifo.vhd

pp_fifo: Fix full fifo losing all data on simultaneous push & pop

2020-05-15 20:49:09 +10:00

pp_soc_uart.vhd

uart: Remove combinational loops on ack and stall signal

2020-06-13 11:38:34 +10:00

pp_utilities.vhd

Initial import of microwatt

2019-08-22 16:46:13 +10:00

soc_reset_tb.vhdl

Exit cleanly from testbench on success

2020-05-20 16:07:13 +10:00

soc_reset.vhdl

soc_reset: Use counters, add synchronizers

2020-05-16 12:42:58 +10:00

top-acorn-cle-215.vhdl

acorn-cle-215: Implement SMP and enable FPU and BTC

2025-05-30 10:05:41 +10:00

top-antmicro-artix-dc-scm.vhdl

Move alt_reset to syscon

2022-10-31 14:41:15 +08:00

top-arty.vhdl

arty a7: Turn on LED 5 when SD card command-done interrupt is enabled

2026-02-04 09:50:11 +11:00

top-ecpix5.vhdl

ECPIX-5: Add liteeth support

2024-04-09 14:22:01 +10:00

top-generic.vhdl

Remove option for "short" 16x16 bit multiplier

2022-08-10 11:27:45 +10:00

top-genesys2.vhdl

genesys2: Fix SPI_FLASH_OFFSET (#449)

2025-08-18 09:48:23 +10:00

top-nexys-video.vhdl

liteeth: Regenerate from current upstream litex

2024-04-06 19:14:50 +11:00

top-orangecrab0.2.vhdl

Move alt_reset to syscon

2022-10-31 14:41:15 +08:00

top-wukong-v2.vhdl

liteeth: Regenerate from current upstream litex

2024-04-06 19:14:50 +11:00

wukong-v2.xdc

Add support for QMTech Wukong v2 board

2021-09-25 18:18:32 +10:00