- asm-11_expect: skip data checks if dot not defined
- tbrun: print list of failed test after summary line
- RparseUrl: add DirName,FileName,FileStem,FileType
- librtools/Rstats: add Reset(); drop operator-=() and operator*=()
- librtcltools/RtclStats: Rename Collect->Exec, not longer const; add -reset
- libr*/*: Stats() not longer const; use RtclStats::Exec()
- asm-11/lib/vec_devcatch.mac: use tti,tto instead of dlr,dlt
- ibdr_pc11: set rbuf.[rp]size0 (like dl11)
- librw11/Rw11Cntl{LP11,PC11}: use RtraceTools::
- ibd_kw11l:
- add csr.ir (rem; as intreq monitor)
- csr only loc writable
- csr.moni can be cleared, but not set by loc write
- ibdr_{dl11,lp11,lp11_buf}: add rcsr.ir and xcsr.ir (intreq monitors)
- asm-11: print lines with errors to stderr unless -lst seen
- ibd_kw11p:
- add csr.ir (rem; as intreq monitor)
- the source of external events (rate=11) is now selectable vai an new rem
accessible csr.erate field. options: sysclk, 1 Mhz, extevt, none
- w11a_hbpt/test_hbpt_basics.tcl: leave system in clean state at end
- mcode/pc11/pc11copy.mac: add kw11-l/p stress (further ECO-030 testing)
- ib_intmap,ib_intmap24: BUGFIX: ensure ACK send to correct device
- ibdr_{maxi,mini}sys: add CLK port to ib_intmap,ib_intmap24
- pdp11_irq: BUGFIX: re-write, ensure ACK send to correct device
- for further details see doc/ECO-030-EI_ACK-misroute.md
- for test and demonstration, starting with
- dl11/dl11echo.mac: console interface echo tester
- sys/blink.mac: 'blinking lights' demo (rsx,bsd and other modes)
- retire tools/asm-11/w11 area
- Rw11Cpu: add ExecWibr(),ExecRibr(); LoadAbs(): better trace format
- Rw11Cntl{DEUNA,DL11,LP11,RK11,RHRP,TM11}: use ExecWibr(),ExecRibr()
- ldadump: better -trec format of start address record
- asm-11: .end directive auto-creates '...end' label
- ti_w11: for -e use .end start address when available
- defs_cpu.mac: add some CPU system registers
- defs_dl.mac: fix naming typo
- defs_tm.mac: add function mnemos
- ibdr_dl11
- now xbuf.val in bit 15 and 8;
- use rbuf instead xbuf for rdry reporting
- remove maintenance mode
- use ib_rlim_slv; add RLIM_CEV, drop CE_USEC
- ibdr_pc11
- pbuf.pval in bit 15 and 8
- move rbusy reporting from pbuf to rbuf register
- ibdr_maxisys,ibdr_minisys: adapt to new ibdr_dl11 iface
- tb_rlink_tba_pdp11core_ibdr.dat: adapt to new ibdr_dl11 iface
- tcl/rw11/util.tcl: setup_tt: rename dlrlim to dlrrlim
- oskit/*/*_boot.tcl: use dlrrlim instead of dlrlim
- Rw11CntlDL11,Rw11CntlPC11: adapt to new dl11,pc11 iface
- tools/asm-11/lib/defs_{dl,pc}.mac: added definition file
- tools/oskit/hook/hook_ibmon_{pca,tta}.tcl: added imon hook file
- RlinkServer: trace now with timestamp and selective
- Rw11CntlLP11: add fQueBusy and queue protection; fix logic; better trace
- test_lp11_all.tcl: check csr.err and csr.rlim not changed by breset
- rw11/asm.tcl: asmwait: allow alternate stop symbol
- ib_rlim_{gen,slv}: new modules for implementation of rate limiters
- ibdr_lp11_buf: new LP11 interface with fifo buffering
- ibdr_maxisys: add ib_rlim_gen, ibdr_lp11_buf
- tbench/test_lp11_all.tcl: tbench for lp11 and lp11_buf
- Rw11CntlLP11: handles now also buffered lp11
- *.Doxyfile: update to 1.8.15 template format (from 1.8.7)
- tst_sram: define and use init_rbf_*
- rbd_rbmon: more robust ack,err trace when busy
- pdp11.vhd: define c_init_rbf_greset
- pdp11_core_rbus: rename state field rbinit to greset
- pdp11_sys70: add and use RESET_SYS; fix pdp11_mem70 reset
- test_cp_ibrbasics.tcl: use imap addresses for test area
- rbmoni/test_regs.tcl: add a few cntl logic tests
- rbmoni/util.tcl: streamline raw_check
- rw11/defs.tcl: define INIT bits
- rw11/tbench.tcl: bench_list: ignore whitespace and empty lines
- tst_sram/util.tcl: define INIT
